Adding upstream version 1.3.2.upstream/1.3.2upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 94 insertions, 0 deletions

diff --git a/doc/01-About.md b/doc/01-About.md
new file mode 100644
index 0000000..bd9dd58
--- /dev/null
+++ b/doc/01-About.md
@@ -0,0 +1,56 @@
+# Icinga Cube
+
+The Icinga Cube is a tiny but useful [Icinga Web](https://github.com/Icinga/icingaweb2)
+module. It currently shows host and service statistics (total count, health) grouped by
+various custom variables in multiple dimensions.
+
+![Cube - Overview](img/cube_simple.png)
+
+It will be your new best friend in case you are running a large environment and
+want to get a quick answers to questions like:
+
+* Which project uses how many servers per environment at which location/site?
+  * Who occupies most servers?
+  * How many of those are used in production?
+  * Which project has only development and test boxes? 
+* Which operating system is used for which project and in which environment?
+  * Do we still have Debian Lenny?
+  * Which projects are to blame for this?
+  * Do we have applications where the operating systems used differ in staging
+    and production? 
+* Which project uses which operating system version for which application?
+  * Which projects have homogeneous environments?
+  * Which projects are at a consistent patch level?
+  * How many RHEL 6 variants (6.1, 6.2, 6.3...) do we use?
+  * Who is running the oldest ones? In production?
+* Which projects are still using physical servers in which environment?
+
+For Businessmen - Drill and Slice
+---------------------------------
+
+Get answers to your questions. Quick and fully autonomous, using the cube
+requires no technical skills. Choose amongst all available dimensions and rotate
+the Cube to fit your needs.
+
+![Cube - Configure Dimensions](img/cube_move-up.png)
+
+Want to drill down? Choose a slice and get your answers:
+
+![Cube - Configure Dimensions](img/cube_slice.png)
+
+All facts configured for systems monitored by [Icinga](https://www.icinga.com/)
+can be used for your research.
+
+For Icinga Director users
+-------------------------
+
+In case you are using the [Icinga Director](https://github.com/Icinga/icingaweb2-module-director),
+in addition to the multi-selection/edit feature the cube provides a nice way to
+modify multiple hosts at once.
+
+![Cube - Director multi-edit](img/cube_director.png)
+
+Installation
+------------
+
+To install Icinga Cube see [Installation](02-Installation.md).
diff --git a/doc/02-Installation.md b/doc/02-Installation.md
new file mode 100644
index 0000000..d6f3271
--- /dev/null
+++ b/doc/02-Installation.md
@@ -0,0 +1,23 @@
+<!-- {% if index %} -->
+# Installing Icinga Cube
+
+The recommended way to install Icinga Cube is to use prebuilt packages for
+all supported platforms from our official release repository.
+Please note that [Icinga Web](https://icinga.com/docs/icinga-web) is required to run Icinga Cube
+and if it is not already set up, it is best to do this first.
+
+The following steps will guide you through installing and setting up Icinga Cube.
+<!-- {% else %} -->
+<!-- {% if not icingaDocs %} -->
+
+## Installing the Package
+
+If the [repository](https://packages.icinga.com) is not configured yet, please add it first.
+Then use your distribution's package manager to install the `icinga-cube` package
+or install [from source](02-Installation.md.d/From-Source.md).
+<!-- {% endif %} --><!-- {# end if not icingaDocs #} -->
+
+## Configuring Icinga Cube
+
+No additional steps are required to set up Icinga Cube and it is ready to use right after installation.
+<!-- {% endif %} --><!-- {# end else if index #} -->
diff --git a/doc/02-Installation.md.d/From-Source.md b/doc/02-Installation.md.d/From-Source.md
new file mode 100644
index 0000000..92ac15e
--- /dev/null
+++ b/doc/02-Installation.md.d/From-Source.md
@@ -0,0 +1,15 @@
+# Installing Icinga Cube from Source
+
+Please see the Icinga Web documentation on
+[how to install modules](https://icinga.com/docs/icinga-web-2/latest/doc/08-Modules/#installation) from source.
+Make sure you use `cube` as the module name. The following requirements must also be met.
+
+## Requirements
+
+* PHP (≥7.2)
+* [Icinga Web](https://github.com/Icinga/icingaweb2) (≥2.9)
+* [Icinga DB Web](https://github.com/Icinga/icingadb-web) (≥1.0)
+* [Icinga PHP Library (ipl)](https://github.com/Icinga/icinga-php-library) (≥0.13.0)
+
+If you are using PostgreSQL, you need at least version 9.5 which provides the `ROLLUP` feature.
+<!-- {% include "02-Installation.md" %} -->
diff --git a/doc/img/cube_action-links.png b/doc/img/cube_action-links.png
new file mode 100644
index 0000000..2f3abe3
--- /dev/null
+++ b/doc/img/cube_action-links.png
diff --git a/doc/img/cube_director.png b/doc/img/cube_director.png
new file mode 100644
index 0000000..b081c1d
--- /dev/null
+++ b/doc/img/cube_director.png
diff --git a/doc/img/cube_move-up.png b/doc/img/cube_move-up.png
new file mode 100644
index 0000000..1fb3c09
--- /dev/null
+++ b/doc/img/cube_move-up.png
diff --git a/doc/img/cube_simple.png b/doc/img/cube_simple.png
new file mode 100644
index 0000000..91bb8f2
--- /dev/null
+++ b/doc/img/cube_simple.png
diff --git a/doc/img/cube_slice.png b/doc/img/cube_slice.png
new file mode 100644
index 0000000..4880cc3
--- /dev/null
+++ b/doc/img/cube_slice.png