Merging upstream version 2.2.0+dfsg.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 36 insertions, 0 deletions

diff --git a/flows/Readme.txt b/flows/Readme.txt
new file mode 100644
index 0000000..3ff19d0
--- /dev/null
+++ b/flows/Readme.txt
@@ -0,0 +1,36 @@
+The following steps needs to be done before running pyflows test:
+
+1) Install Python 3.10 and above
+
+2) sudo dnf install python3-matplotlib
+
+3) install gnuplot 'sudo dnf install gnuplot'
+
+4) Update your ".bashrc" and add the location of your flows files "/your_local_dir/iperf2-code/flows" to PYTHONPATH:
+export PYTHONPATH=/your_local_dir/iperf2-code/flows:$PYTHONPATH
+echo $PYTHONPATH
+
+5) compile the following modules:
+cd /your_local_dir/iperf2-code/flows
+python3 -m py_compile flows.py  ssh_nodes.py
+
+6) Configure the IP addresses and LAN addresses in the router_latency.py
+
+7) Make sure passwordless ssh is configured for all the ssh DUTs, e.g.
+
+[bm932125@rjm-wifibt-ctrl:/ltf-local/Code/LTF/pyflows/scripts] $ ssh-copy-id -i ~/.ssh/id_rsa.pub root@10.19.85.40
+/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/home/bm932125/.ssh/id_rsa.pub"
+/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
+/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
+root@10.19.85.40's password:
+
+Number of key(s) added: 1
+
+Now try logging into the machine, with:   "ssh 'root@10.19.85.40'"
+and check to make sure that only the key(s) you wanted were added.
+
+8) Make sure all the wireless devices are loaded and connected to the SSID
+
+9) Run the test:
+cd /your_local_dir/iperf2-code/flows
+python3 router_latency.py