diff options
Diffstat (limited to 'themes')
| -rw-r--r-- | themes/Makefile.am | 6 | ||||
| -rw-r--r-- | themes/Makefile.in | 551 | ||||
| -rw-r--r-- | themes/colorless.theme | 291 | ||||
| -rw-r--r-- | themes/default.theme | 295 | ||||
| -rw-r--r-- | themes/meson.build | 6 |
5 files changed, 1149 insertions, 0 deletions
diff --git a/themes/Makefile.am b/themes/Makefile.am new file mode 100644 index 0000000..c881453 --- /dev/null +++ b/themes/Makefile.am @@ -0,0 +1,6 @@ +themedir = $(datadir)/irssi/themes +theme_DATA = default.theme colorless.theme + +EXTRA_DIST = \ + $(theme_DATA) \ + meson.build diff --git a/themes/Makefile.in b/themes/Makefile.in new file mode 100644 index 0000000..eacf7d0 --- /dev/null +++ b/themes/Makefile.in @@ -0,0 +1,551 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = themes +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/glib-2.0.m4 \ + $(top_srcdir)/m4/glibtests.m4 $(top_srcdir)/m4/libgcrypt.m4 \ + $(top_srcdir)/m4/libotr.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/irssi-config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(themedir)" +DATA = $(theme_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CHAT_MODULES = @CHAT_MODULES@ +COMMON_LIBS = @COMMON_LIBS@ +COMMON_NOUI_LIBS = @COMMON_NOUI_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +FUZZER_LIBS = @FUZZER_LIBS@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ +GLIB_LIBS = @GLIB_LIBS@ +GLIB_MKENUMS = @GLIB_MKENUMS@ +GOBJECT_QUERY = @GOBJECT_QUERY@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@ +LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@ +LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBOTR_CFLAGS = @LIBOTR_CFLAGS@ +LIBOTR_LIBS = @LIBOTR_LIBS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ +OPENSSL_LIBS = @OPENSSL_LIBS@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +OTR_CFLAGS = @OTR_CFLAGS@ +OTR_LDFLAGS = @OTR_LDFLAGS@ +OTR_LINK_FLAGS = @OTR_LINK_FLAGS@ +OTR_LINK_LIBS = @OTR_LINK_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL_CFLAGS = @PERL_CFLAGS@ +PERL_EXTRA_OPTS = @PERL_EXTRA_OPTS@ +PERL_FE_LINK_LIBS = @PERL_FE_LINK_LIBS@ +PERL_LDFLAGS = @PERL_LDFLAGS@ +PERL_LINK_FLAGS = @PERL_LINK_FLAGS@ +PERL_LINK_LIBS = @PERL_LINK_LIBS@ +PERL_MM_OPT = @PERL_MM_OPT@ +PERL_MM_PARAMS = @PERL_MM_PARAMS@ +PERL_STATIC_LIBS = @PERL_STATIC_LIBS@ +PERL_USE_LIB = @PERL_USE_LIB@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PROG_LIBS = @PROG_LIBS@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TEXTUI_LIBS = @TEXTUI_LIBS@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +installed_test_metadir = @installed_test_metadir@ +installed_testdir = @installed_testdir@ +irc_MODULES = @irc_MODULES@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +otr_module_lib = @otr_module_lib@ +otr_static_lib = @otr_static_lib@ +pdfdir = @pdfdir@ +perl_module_fe_lib = @perl_module_fe_lib@ +perl_module_lib = @perl_module_lib@ +perl_static_fe_lib = @perl_static_fe_lib@ +perl_static_lib = @perl_static_lib@ +perlpath = @perlpath@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sedpath = @sedpath@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +themedir = $(datadir)/irssi/themes +theme_DATA = default.theme colorless.theme +EXTRA_DIST = \ + $(theme_DATA) \ + meson.build + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign themes/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign themes/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-themeDATA: $(theme_DATA) + @$(NORMAL_INSTALL) + @list='$(theme_DATA)'; test -n "$(themedir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(themedir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(themedir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(themedir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(themedir)" || exit $$?; \ + done + +uninstall-themeDATA: + @$(NORMAL_UNINSTALL) + @list='$(theme_DATA)'; test -n "$(themedir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(themedir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(themedir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-themeDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-themeDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip install-themeDATA installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags-am uninstall uninstall-am uninstall-themeDATA + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/themes/colorless.theme b/themes/colorless.theme new file mode 100644 index 0000000..e87e12f --- /dev/null +++ b/themes/colorless.theme @@ -0,0 +1,291 @@ +# When testing changes, the easiest way to reload the theme is with /RELOAD. +# This reloads the configuration file too, so if you did any changes remember +# to /SAVE it first. Remember also that /SAVE overwrites the theme file with +# old data so keep backups :) + +# TEMPLATES: + +# The real text formats that irssi uses are the ones you can find with +# /FORMAT command. Back in the old days all the colors and texts were mixed +# up in those formats, and it was really hard to change the colors since you +# might have had to change them in tens of different places. So, then came +# this templating system. + +# Now the /FORMATs don't have any colors in them, and they also have very +# little other styling. Most of the stuff you need to change is in this +# theme file. If you can't change something here, you can always go back +# to change the /FORMATs directly, they're also saved in these .theme files. + +# So .. the templates. They're those {blahblah} parts you see all over the +# /FORMATs and here. Their usage is simply {name parameter1 parameter2}. +# When irssi sees this kind of text, it goes to find "name" from abstracts +# block below and sets "parameter1" into $0 and "parameter2" into $1 (you +# can have more parameters of course). Templates can have subtemplates. +# Here's a small example: +# /FORMAT format hello {colorify {underline world}} +# abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; } +# When irssi expands the templates in "format", the final string would be: +# hello %G%Uworld%U%n +# ie. underlined bright green "world" text. +# and why "$0-", why not "$0"? $0 would only mean the first parameter, +# $0- means all the parameters. With {underline hello world} you'd really +# want to underline both of the words, not just the hello (and world would +# actually be removed entirely). + +# COLORS: + +# You can find definitions for the color format codes in docs/formats.txt. + +# There's one difference here though. %n format. Normally it means the +# default color of the terminal (white mostly), but here it means the +# "reset color back to the one it was in higher template". For example +# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would +# print yellow "foo" (as set with %Y) but "bar" would be green, which was +# set at the beginning before the {foo} template. If there wasn't the %g +# at start, the normal behaviour of %n would occur. If you _really_ want +# to use the terminal's default color, use %N. + +############################################################################# + +# default foreground color (%N) - -1 is the "default terminal color" +default_color = "-1"; + +# print timestamp/servertag at the end of line, not at beginning +info_eol = "false"; + +# these characters are automatically replaced with specified color +# (dark grey by default) +#replaces = { "[]=" = "%K$*%n"; }; + +abstracts = { + ## + ## generic + ## + + # text to insert at the beginning of each non-message line + line_start = "-!- "; + + # timestamp styling, nothing by default + timestamp = "$*"; + + # any kind of text that needs hilighting, default is to bold + hilight = "%_$*%_"; + + # any kind of error message, default is bright red + error = "%_$*%_"; + + # channel name is printed + channel = "$*"; + + # nick is printed + nick = "$*"; + + # nick host is printed + nickhost = "[$*]"; + + # server name is printed + server = "$*"; + + # some kind of comment is printed + comment = "[$*]"; + + # reason for something is printed (part, quit, kick, ..) + reason = "{comment $*}"; + + # mode change is printed ([+o nick]) + mode = "{comment $*}"; + + ## + ## channel specific messages + ## + + # highlighted nick/host is printed (joins) + channick_hilight = "$*"; + chanhost_hilight = "{nickhost $*}"; + + # nick/host is printed (parts, quits, etc.) + channick = "$*"; + chanhost = "{nickhost $*}"; + + # highlighted channel name is printed + channelhilight = "$*"; + + # ban/ban exception/invite list mask is printed + ban = "$*"; + + ## + ## messages + ## + + # the basic styling of how to print message, $0 = nick mode, $1 = nick + msgnick = "<$0$1-> %|"; + + # message from you is printed. "msgownnick" specifies the styling of the + # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the + # whole line. + + # Example1: You want the message text to be green: + # ownmsgnick = "{msgnick $0 $1-}%g"; + # Example2.1: You want < and > chars to be yellow: + # ownmsgnick = "%Y{msgnick $0 $1-%Y}%n"; + # (you'll also have to remove <> from replaces list above) + # Example2.2: But you still want to keep <> grey for other messages: + # pubmsgnick = "%K{msgnick $0 $1-%K}%n"; + # pubmsgmenick = "%K{msgnick $0 $1-%K}%n"; + # pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n"; + # ownprivmsgnick = "%K{msgnick $*%K}%n"; + # privmsgnick = "%K{msgnick %R$*%K}%n"; + + # $0 = nick mode, $1 = nick + ownmsgnick = "{msgnick $0 $1-}"; + ownnick = "$*"; + + # public message in channel, $0 = nick mode, $1 = nick + pubmsgnick = "{msgnick $0 $1-}"; + pubnick = "$*"; + + # public message in channel meant for me, $0 = nick mode, $1 = nick + pubmsgmenick = "{msgnick $0 $1-}"; + menick = "%_$*%_"; + + # public highlighted message in channel + # $0 = highlight color, $1 = nick mode, $2 = nick + pubmsghinick = "{msgnick $1 $0$2-%n}"; + + # channel name is printed with message + msgchannel = ":$*"; + + # private message, $0 = nick, $1 = host + privmsg = "[$0($1-)] "; + + # private message from you, $0 = "msg", $1 = target nick + ownprivmsg = "[$0($1-)] "; + + # own private message in query + ownprivmsgnick = "{msgnick $*}"; + ownprivnick = "$*"; + + # private message in query + privmsgnick = "{msgnick $*}"; + + ## + ## Actions (/ME stuff) + ## + + # used internally by this theme + action_core = " * $*"; + + # generic one that's used by most actions + action = "{action_core $*} "; + + # own action, both private/public + ownaction = "{action $*}"; + + # own action with target, both private/public + ownaction_target = "{action_core $0}:$1 "; + + # private action sent by others + pvtaction = " (*) $* "; + pvtaction_query = "{action $*}"; + + # public action sent by others + pubaction = "{action $*}"; + + + ## + ## other IRC events + ## + + # whois + whois = "%# $[8]0 : $1-"; + + # notices + ownnotice = "[$0($1-)] "; + notice = "-$*- "; + pubnotice_channel = ":$*"; + pvtnotice_host = "($*)"; + servernotice = "!$* "; + + # CTCPs + ownctcp = "[$0($1-)] "; + ctcp = "$*"; + + # wallops + wallop = "$*: "; + wallop_nick = "$*"; + wallop_action = " * $* "; + + # netsplits + netsplit = "$*"; + netjoin = "$*"; + + # /names list + names_prefix = ""; + names_nick = "[$0$1-] "; + names_nick_op = "{names_nick $*}"; + names_nick_halfop = "{names_nick $*}"; + names_nick_voice = "{names_nick $*}"; + names_users = "[$*]"; + names_channel = "$*"; + + # DCC + dcc = "$*"; + dccfile = "$*"; + + # DCC chat, own msg/action + dccownmsg = "[$0($1-)] "; + dccownnick = "$*"; + dccownquerynick = "$*"; + dccownaction = "{action $*}"; + dccownaction_target = "{action_core $0}:$1 "; + + # DCC chat, others + dccmsg = "[$1-($0)] "; + dccquerynick = "$*"; + dccaction = " (*dcc*) $* %|"; + + ## + ## statusbar + ## + + # default background for all statusbars. You can also give + # the default foreground color for statusbar items. + sb_background = "%8"; + window_border = "%8"; + + # default backround for "default" statusbar group + #sb_default_bg = "%8"; + # background for prompt / input line + sb_prompt_bg = "%n"; + # background for info statusbar + sb_info_bg = "%8"; + # background for topicbar (same default) + #sb_topic_bg = "%8"; + + # text at the beginning of statusbars. "sb" already puts a space there, + # so we don't use anything by default. + sbstart = ""; + # text at the end of statusbars. Use space so that it's never + # used for anything. + sbend = " "; + + prompt = "[$*] "; + + sb = " [$*]"; + sbmode = "(+$*)"; + sbaway = " (zZzZ)"; + sbservertag = ":$0 (change with ^X)"; + + # activity in statusbar + + # ',' separator + sb_act_sep = "$*"; + # normal text + sb_act_text = "$*"; + # public message + sb_act_msg = "%_$*%_"; + # hilight + sb_act_hilight = "%8$*%8"; + # hilight with specified color, $0 = color, $1 = text + sb_act_hilight_color = "$0$1-%n"; +}; diff --git a/themes/default.theme b/themes/default.theme new file mode 100644 index 0000000..79b1af5 --- /dev/null +++ b/themes/default.theme @@ -0,0 +1,295 @@ +# When testing changes, the easiest way to reload the theme is with /RELOAD. +# This reloads the configuration file too, so if you did any changes remember +# to /SAVE it first. Remember also that /SAVE overwrites the theme file with +# old data so keep backups :) + +# TEMPLATES: + +# The real text formats that irssi uses are the ones you can find with +# /FORMAT command. Back in the old days all the colors and texts were mixed +# up in those formats, and it was really hard to change the colors since you +# might have had to change them in tens of different places. So, then came +# this templating system. + +# Now the /FORMATs don't have any colors in them, and they also have very +# little other styling. Most of the stuff you need to change is in this +# theme file. If you can't change something here, you can always go back +# to change the /FORMATs directly, they're also saved in these .theme files. + +# So .. the templates. They're those {blahblah} parts you see all over the +# /FORMATs and here. Their usage is simply {name parameter1 parameter2}. +# When irssi sees this kind of text, it goes to find "name" from abstracts +# block below and sets "parameter1" into $0 and "parameter2" into $1 (you +# can have more parameters of course). Templates can have subtemplates. +# Here's a small example: +# /FORMAT format hello {colorify {underline world}} +# abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; } +# When irssi expands the templates in "format", the final string would be: +# hello %G%Uworld%U%n +# ie. underlined bright green "world" text. +# and why "$0-", why not "$0"? $0 would only mean the first parameter, +# $0- means all the parameters. With {underline hello world} you'd really +# want to underline both of the words, not just the hello (and world would +# actually be removed entirely). + +# COLORS: + +# You can find definitions for the color format codes in docs/formats.txt. + +# There's one difference here though. %n format. Normally it means the +# default color of the terminal (white mostly), but here it means the +# "reset color back to the one it was in higher template". For example +# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would +# print yellow "foo" (as set with %Y) but "bar" would be green, which was +# set at the beginning before the {foo} template. If there wasn't the %g +# at start, the normal behaviour of %n would occur. If you _really_ want +# to use the terminal's default color, use %N. + +############################################################################# + +# default foreground color (%N) - -1 is the "default terminal color" +default_color = "-1"; + +# print timestamp/servertag at the end of line, not at beginning +info_eol = "false"; + +# these characters are automatically replaced with specified color +# (dark grey by default) +replaces = { "[]=" = "%K$*%n"; }; + +abstracts = { + ## + ## generic + ## + + # text to insert at the beginning of each non-message line + line_start = "%B-%n!%B-%n "; + + # timestamp styling, nothing by default + timestamp = "$*"; + + # any kind of text that needs hilighting, default is to bold + hilight = "%_$*%_"; + + # any kind of error message, default is bright red + error = "%R$*%n"; + + # channel name is printed + channel = "%_$*%_"; + + # nick is printed + nick = "%_$*%_"; + + # nick host is printed + nickhost = "[$*]"; + + # server name is printed + server = "%_$*%_"; + + # some kind of comment is printed + comment = "[$*]"; + + # reason for something is printed (part, quit, kick, ..) + reason = "{comment $*}"; + + # mode change is printed ([+o nick]) + mode = "{comment $*}"; + + ## + ## channel specific messages + ## + + # highlighted nick/host is printed (joins) + channick_hilight = "%C$*%n"; + chanhost_hilight = "{nickhost %c$*%n}"; + + # nick/host is printed (parts, quits, etc.) + channick = "%c$*%n"; + chanhost = "{nickhost $*}"; + + # highlighted channel name is printed + channelhilight = "%c$*%n"; + + # ban/ban exception/invite list mask is printed + ban = "%c$*%n"; + + ## + ## messages + ## + + # the basic styling of how to print message, $0 = nick mode, $1 = nick + msgnick = "%K<%n$0$1-%K>%n %|"; + + # message from you is printed. "ownnick" specifies the styling of the + # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the + # whole line. + + # Example1: You want the message text to be green: + # ownmsgnick = "{msgnick $0 $1-}%g"; + # Example2.1: You want < and > chars to be yellow: + # ownmsgnick = "%Y{msgnick $0 $1-%Y}%n"; + # (you'll also have to remove <> from replaces list above) + # Example2.2: But you still want to keep <> grey for other messages: + # pubmsgnick = "%K{msgnick $0 $1-%K}%n"; + # pubmsgmenick = "%K{msgnick $0 $1-%K}%n"; + # pubmsghinick = "%K{msgnick $1 $0$2-%n%K}%n"; + # ownprivmsgnick = "%K{msgnick $*%K}%n"; + # privmsgnick = "%K{msgnick %R$*%K}%n"; + + # $0 = nick mode, $1 = nick + ownmsgnick = "{msgnick $0 $1-}"; + ownnick = "%_$*%n"; + + # public message in channel, $0 = nick mode, $1 = nick + pubmsgnick = "{msgnick $0 $1-}"; + pubnick = "%N$*%n"; + + # public message in channel meant for me, $0 = nick mode, $1 = nick + pubmsgmenick = "{msgnick $0 $1-}"; + menick = "%Y$*%n"; + + # public highlighted message in channel + # $0 = highlight color, $1 = nick mode, $2 = nick + pubmsghinick = "{msgnick $1 $0$2-%n}"; + + # channel name is printed with message + msgchannel = "%K:%c$*%n"; + + # private message, $0 = nick, $1 = host + privmsg = "[%R$0%K(%r$1-%K)%n] "; + + # private message from you, $0 = "msg", $1 = target nick + ownprivmsg = "[%r$0%K(%R$1-%K)%n] "; + + # own private message in query + ownprivmsgnick = "{msgnick $*}"; + ownprivnick = "%_$*%n"; + + # private message in query + privmsgnick = "{msgnick %R$*%n}"; + + ## + ## Actions (/ME stuff) + ## + + # used internally by this theme + action_core = "%_ * $*%n"; + + # generic one that's used by most actions + action = "{action_core $*} "; + + # own action, both private/public + ownaction = "{action $*}"; + + # own action with target, both private/public + ownaction_target = "{action_core $0}%K:%c$1%n "; + + # private action sent by others + pvtaction = "%_ (*) $*%n "; + pvtaction_query = "{action $*}"; + + # public action sent by others + pubaction = "{action $*}"; + + + ## + ## other IRC events + ## + + # whois + whois = "%# $[8]0 : $1-"; + + # notices + ownnotice = "[%r$0%K(%R$1-%K)]%n "; + notice = "%K-%M$*%K-%n "; + pubnotice_channel = "%K:%m$*"; + pvtnotice_host = "%K(%m$*%K)"; + servernotice = "%g!$*%n "; + + # CTCPs + ownctcp = "[%r$0%K(%R$1-%K)] "; + ctcp = "%g$*%n"; + + # wallops + wallop = "%_$*%n: "; + wallop_nick = "%n$*"; + wallop_action = "%_ * $*%n "; + + # netsplits + netsplit = "%R$*%n"; + netjoin = "%C$*%n"; + + # /names list + names_prefix = ""; + names_nick = "[%_$0%_$1-] "; + names_nick_op = "{names_nick $*}"; + names_nick_halfop = "{names_nick $*}"; + names_nick_voice = "{names_nick $*}"; + names_users = "[%g$*%n]"; + names_channel = "%G$*%n"; + + # DCC + dcc = "%g$*%n"; + dccfile = "%_$*%_"; + + # DCC chat, own msg/action + dccownmsg = "[%r$0%K($1-%K)%n] "; + dccownnick = "%R$*%n"; + dccownquerynick = "%_$*%n"; + dccownaction = "{action $*}"; + dccownaction_target = "{action_core $0}%K:%c$1%n "; + + # DCC chat, others + dccmsg = "[%G$1-%K(%g$0%K)%n] "; + dccquerynick = "%G$*%n"; + dccaction = "%_ (*dcc*) $*%n %|"; + + ## + ## statusbar + ## + + # default background for all statusbars. You can also give + # the default foreground color for statusbar items. + sb_background = "%4%w"; + window_border = "%4%w"; + + # default backround for "default" statusbar group + #sb_default_bg = "%4"; + # background for prompt / input line + sb_prompt_bg = "%n"; + # background for info statusbar + sb_info_bg = "%8"; + # background for topicbar (same default) + #sb_topic_bg = "%4"; + + # text at the beginning of statusbars. "sb" already puts a space there, + # so we don't use anything by default. + sbstart = ""; + # text at the end of statusbars. Use space so that it's never + # used for anything. + sbend = " "; + + topicsbstart = "{sbstart $*}"; + topicsbend = "{sbend $*}"; + + prompt = "[$*] "; + + sb = " %c[%n$*%c]%n"; + sbmode = "(%c+%n$*)"; + sbaway = " (%GzZzZ%n)"; + sbservertag = ":$0 (change with ^X)"; + sbnickmode = "$0"; + + # activity in statusbar + + # ',' separator + sb_act_sep = "%c$*"; + # normal text + sb_act_text = "%c$*"; + # public message + sb_act_msg = "%W$*"; + # hilight + sb_act_hilight = "%M$*"; + # hilight with specified color, $0 = color, $1 = text + sb_act_hilight_color = "$0$1-%n"; +}; diff --git a/themes/meson.build b/themes/meson.build new file mode 100644 index 0000000..d58dddf --- /dev/null +++ b/themes/meson.build @@ -0,0 +1,6 @@ +install_data( + files( + 'default.theme', + 'colorless.theme', + ), + install_dir : themedir) |