Adding upstream version 2.4.1.upstream/2.4.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 175 insertions, 0 deletions

diff --git a/src/bin/netconf/netconf_messages.mes b/src/bin/netconf/netconf_messages.mes
new file mode 100644
index 0000000..43c17e3
--- /dev/null
+++ b/src/bin/netconf/netconf_messages.mes
@@ -0,0 +1,175 @@
+# Copyright (C) 2012-2023 Internet Systems Consortium, Inc. ("ISC")
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+$NAMESPACE isc::netconf
+
+% NETCONF_BOOT_UPDATE_COMPLETED Boot-update configuration completed for server %1
+This informational message is issued when the initial configuration
+was retrieved using NETCONF and successfully applied to Kea server.
+
+% NETCONF_CONFIG_CHANGED_DETAIL YANG configuration changed: %1
+This debug message indicates a YANG configuration change. The format
+is the change operation (created, modified, deleted or moved) followed
+by xpaths and values of old and new nodes.
+
+% NETCONF_CONFIG_CHANGE_EVENT Received YANG configuration change %1 event
+This informational message is issued when kea-netconf receives a YANG
+configuration change event. The type of event is printed.
+
+% NETCONF_CONFIG_CHECK_FAIL NETCONF configuration check failed: %1
+This error message indicates that kea-netconf had failed configuration
+check. Details are provided. Additional details may be available
+in earlier log entries, possibly on lower levels.
+
+% NETCONF_CONFIG_FAIL NETCONF configuration failed: %1
+This error message indicates that kea-netconf had failed configuration
+attempt. Details are provided. Additional details may be available
+in earlier log entries, possibly on lower levels.
+
+% NETCONF_CONFIG_SYNTAX_WARNING NETCONF configuration syntax warning: %1
+This warning message indicates that the NETCONF configuration had a minor
+syntax error. The error was displayed and the configuration parsing resumed.
+
+% NETCONF_FAILED application experienced a fatal error: %1
+This is a fatal error message issued when kea-netconf
+got an unrecoverable error from within the event loop.
+
+% NETCONF_GET_CONFIG got configuration from %1 server: %2
+This debug message indicates that kea-netconf got the configuration from a
+Kea server. The server name and the retrieved configuration are printed.
+
+% NETCONF_GET_CONFIG_FAILED getting configuration from %1 server failed: %2
+The error message indicates that kea-netconf got an error getting the
+configuration from a Kea server. Make sure that the server is up and
+running, has appropriate control socket defined and that the controls
+socket configuration on the server matches that of kea-netconf. The
+name of the server and the error are printed.
+
+% NETCONF_GET_CONFIG_STARTED getting configuration from %1 server
+This informational message indicates that kea-netconf is trying to get the
+configuration from a Kea server.
+
+% NETCONF_LOG_CHANGE_FAIL NETCONF configuration change logging failed: %1
+The warning message indicates that the configuration change logging
+encountered an unexpected condition. Details of it will be logged.
+
+% NETCONF_MODULE_MISSING_ERR Missing essential module %1 in sysrepo
+This fatal error message indicates that a module required by Netconf
+configuration is not available in the sysrepo repository.  The name of
+the module is printed.
+
+% NETCONF_MODULE_MISSING_WARN Missing module %1 in sysrepo
+This warning message indicates that a module used by Kea is not
+available in the sysrepo repository. The name of the module is printed.
+
+% NETCONF_MODULE_REVISION_ERR Essential module %1 does NOT have the right revision: expected %2, got %3
+This fatal error message indicates that a module required by Netconf
+configuration is not at the right revision in the sysrepo repository.
+The name, expected and available revisions of the module are printed.
+
+% NETCONF_MODULE_REVISION_WARN Module %1 does NOT have the right revision: expected %2, got %3
+This warning message indicates that a module used by Kea is not at the
+right revision in the sysrepo repository. The name, expected and
+available revisions of the module are printed.
+
+% NETCONF_NOTIFICATION_RECEIVED Received notification of type %1 for module %1: %2
+This informational message logs any YANG notification that has been signaled
+by the server, sent to kea-netconf which then was forwarded to subscribed
+clients. To achieve this, kea-netconf subscribes itself as a client to all
+notifications for the configured module.
+
+% NETCONF_NOT_SUBSCRIBED_TO_NOTIFICATIONS subscribing to notifications for %1 server with %2 module failed: %3
+The warning message indicates that kea-netconf got an error subscribing to
+notifications for a Kea server. The most probable cause is probably that the
+model that kea-netconf subscribed to does not have any notification nodes, but
+there may be other more unexpected causes as well.
+The server name, module name and the error are printed.
+
+% NETCONF_RUN_EXIT application is exiting the event loop
+This is a debug message issued when kea-netconf exits its
+event loop. This is a normal step during kea-netconf shutdown.
+
+% NETCONF_SET_CONFIG set configuration to %1 server: %2
+This debug message indicates that kea-netconf set the configuration to a
+Kea server. The server name and the applied configuration are printed.
+
+% NETCONF_SET_CONFIG_FAILED setting configuration to %1 server failed: %2
+The error message indicates that kea-netconf got an error setting the
+configuration to a Kea server. Make sure that the server is up and
+running, has appropriate control socket defined and that the controls
+socket configuration on the server matches that of kea-netconf. The
+name of the server and the error are printed.
+
+% NETCONF_SET_CONFIG_STARTED setting configuration to %1 server
+This informational message indicates that kea-netconf is trying to set the
+configuration to a Kea server.
+
+% NETCONF_STARTED kea-netconf (version %1) started
+This informational message indicates that kea-netconf has processed
+all configuration information and is ready to begin processing.
+The version is also printed.
+
+% NETCONF_SUBSCRIBE_CONFIG subscribing configuration changes for %1 server with %2 module
+This information message indicates that kea-netconf is trying to subscribe
+configuration changes for a Kea server. The names of the server and
+the module are printed.
+
+% NETCONF_SUBSCRIBE_CONFIG_FAILED subscribe configuration changes for %1 server with %2 module failed: %3
+The error message indicates that kea-netconf got an error subscribing
+configuration changes for a Kea server. The names of the server and
+the module, and the error are printed.
+
+% NETCONF_SUBSCRIBE_NOTIFICATIONS subscribing to notifications for %1 server with %2 module
+This information message indicates that kea-netconf is trying to subscribe to
+notifications for a Kea server. The server name and module name are printed.
+
+% NETCONF_UPDATE_CONFIG updating configuration with %1 server: %2
+This debug message indicates that kea-netconf update the configuration
+of a Kea server. The server name and the updated configuration are
+printed.
+
+% NETCONF_UPDATE_CONFIG_COMPLETED completed updating configuration for %1 server
+This informational message indicates that kea-netconf updated with success the
+configuration of a Kea server.
+
+% NETCONF_UPDATE_CONFIG_FAILED updating configuration with %1 server: %2
+The error message indicates that kea-netconf got an error updating the
+configuration of a Kea server. This includes a configuration rejected
+by a Kea server when it tried to apply it. The name of the server and
+the error are printed.
+
+% NETCONF_UPDATE_CONFIG_STARTED started updating configuration for %1 server
+This informational message indicates that kea-netconf is trying to update the
+configuration of a Kea server.
+
+% NETCONF_VALIDATE_CONFIG validating configuration with %1 server: %2
+This debug message indicates that kea-netconf is validating the configuration
+with a Kea server. The server name and the validated configuration are
+printed.
+
+% NETCONF_VALIDATE_CONFIG_COMPLETED completed validating configuration for %1 server
+This informational message indicates that kea-netconf validated with success the
+configuration with a Kea server.
+
+% NETCONF_VALIDATE_CONFIG_FAILED validating configuration with %1 server got an error: %2
+The error message indicates that kea-netconf got an error validating the
+configuration with a Kea server. This message is produced when
+exception is thrown during an attempt to validate received
+configuration. Additional explanation may be provided as a
+parameter. You may also take a look at earlier log messages.  The name
+of the server and the error are printed.
+
+% NETCONF_VALIDATE_CONFIG_REJECTED validating configuration with %1 server was rejected: %2
+The warning message indicates that kea-netconf got an error validating the
+configuration with a Kea server. This message is printed when the
+configuration was rejected during normal processing. Additional
+explanation may be provided as a parameter. You may also take a look
+at earlier log messages.  The name of the server and the error are
+printed.
+
+% NETCONF_VALIDATE_CONFIG_STARTED started validating configuration for %1 server
+This informational message indicates that kea-netconf is trying to validate the
+configuration with a Kea server.