diff options
Diffstat (limited to 'src/lib/dhcpsrv/dhcpsrv_messages.mes')
| -rw-r--r-- | src/lib/dhcpsrv/dhcpsrv_messages.mes | 1401 |
1 files changed, 1401 insertions, 0 deletions
diff --git a/src/lib/dhcpsrv/dhcpsrv_messages.mes b/src/lib/dhcpsrv/dhcpsrv_messages.mes new file mode 100644 index 0000000..f82f8cc --- /dev/null +++ b/src/lib/dhcpsrv/dhcpsrv_messages.mes @@ -0,0 +1,1401 @@ +# Copyright (C) 2012-2023 Internet Systems Consortium, Inc. ("ISC") +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +$NAMESPACE isc::dhcp + +% DHCPSRV_CFGMGR_ADD_IFACE listening on interface %1 +An info message issued when a new interface is being added to the collection of +interfaces on which the server listens to DHCP messages. + +% DHCPSRV_CFGMGR_ADD_SUBNET4 adding subnet %1 +A debug message reported when the DHCP configuration manager is adding the +specified IPv4 subnet to its database. + +% DHCPSRV_CFGMGR_ADD_SUBNET6 adding subnet %1 +A debug message reported when the DHCP configuration manager is adding the +specified IPv6 subnet to its database. + +% DHCPSRV_CFGMGR_ALL_IFACES_ACTIVE enabling listening on all interfaces +A debug message issued when the server is being configured to listen on all +interfaces. + +% DHCPSRV_CFGMGR_CFG_DHCP_DDNS Setting DHCP-DDNS configuration to: %1 +A debug message issued when the server's DHCP-DDNS settings are changed. + +% DHCPSRV_CFGMGR_CLEAR_ACTIVE_IFACES stop listening on all interfaces +A debug message issued when configuration manager clears the internal list +of active interfaces. This doesn't prevent the server from listening to +the DHCP traffic through open sockets, but will rather be used by Interface +Manager to select active interfaces when sockets are re-opened. + +% DHCPSRV_CFGMGR_CONFIG4_MERGED Configuration backend data has been merged. +This is an informational message emitted when the DHCPv4 server has +successfully merged configuration data retrieved from its configuration +backends into the current configuration. + +% DHCPSRV_CFGMGR_CONFIG6_MERGED Configuration backend data has been merged. +This is an informational message emitted when the DHCPv6 server has +successfully merged configuration data retrieved from its configuration +backends into the current configuration. + +% DHCPSRV_CFGMGR_CONFIGURE_SERVERID server configuration includes specification of a server identifier +This warning message is issued when the server specified configuration of +a server identifier. If this new configuration overrides an existing +server identifier, this will affect existing bindings of the clients. +Clients will use old server identifier when they renew their bindings. +The server will not respond to those renews, and the clients will +eventually transition to rebinding state. The server should reassign +existing bindings and the clients will subsequently use new server +identifier. It is recommended to not modify the server identifier, unless +there is a good reason for it, to avoid increased number of renewals and +a need for rebinding (increase of multicast traffic, which may be received +by multiple servers). + +% DHCPSRV_CFGMGR_DDNS_PARAMETER_IGNORED dhcp-ddns:%1 is deprecated, using existing global:%2 +This is an informational message issued during configuration parsing when +the server detects that a deprecated parameter has been specified in the +"dhcp-ddns" element which conflicts with its corresponding global parameter. +When this occurs the server simply ignores the value from dhcp-ddns. +The log message shows be the deprecated and the supported parameter names. +Note the configuration change only affects the in-memory configuration. +Modify the configuration to comply with the supported parameters. + +% DHCPSRV_CFGMGR_DDNS_PARAMETER_MOVED dhcp-ddns:%1 is deprecated, moving it to global:%2 +This is an informational message issued during configuration parsing when +the server detects that a deprecated parameter has been specified in the +"dhcp-ddns" element for which no corresponding global value exists. When +this occurs, the server removes the parameter from dhcp-ddns and inserts the +parameter into the global scope. The log message shows the deprecated +and the supported parameter names. Note the configuration change only affects +the in-memory configuration. Modify the configuration to comply with +the supported parameters. + +% DHCPSRV_CFGMGR_DEL_SUBNET4 IPv4 subnet %1 removed +This debug message is issued when a subnet is successfully removed from the +server configuration. The argument identifies the removed subnet. + +% DHCPSRV_CFGMGR_DEL_SUBNET6 IPv6 subnet %1 removed +This debug message is issued when a subnet is successfully removed from the +server configuration. The argument identifies the removed subnet. + +% DHCPSRV_CFGMGR_FLQ_POPULATE_FREE_ADDRESS_LEASES populating free address leases for the FLQ allocator in subnet %1; it can take a while! +This informational message is issued when the server begins building a queue +of free address leases for the given subnet. It can take a considerable amount +of time, depending on the size of the address pools. + +% DHCPSRV_CFGMGR_FLQ_POPULATE_FREE_ADDRESS_LEASES_DONE populated %1 free address leases for the FLQ allocator in subnet %2 in %3 +This informational message is issued when the server ends building a queue +of free address leases for a given subnet. The first argument logs the +number of free leases, the second argument logs the subnet, and the third +argument logs a duration. + +% DHCPSRV_CFGMGR_FLQ_POPULATE_FREE_PREFIX_LEASES populating free prefix leases for the FLQ allocator in subnet %1; it can take a while! +This informational message is issued when the server begins building a queue +of free leases for the given subnet. It can take a considerable amount of +time, depending on the size of the delegated prefix pools. + +% DHCPSRV_CFGMGR_FLQ_POPULATE_FREE_PREFIX_LEASES_DONE populated %1 free prefix leases for the FLQ allocator in subnet %2 completed in %3 +This informational message is issued when the server ends building a queue +of free prefix leases for a given subnet. The first argument logs the +number of free leases, the second argument logs the subnet, and the third +argument logs a duration. + +% DHCPSRV_CFGMGR_IPV4_RESERVATIONS_NON_UNIQUE_IGNORED ignoring "ip-reservations-unique" setting because at least one of the host database backends does not support non-unique IP reservations in a subnet +This warning message is issued when the server failed to use the new setting +of the ip-reservations-unique global parameter configured via the configuration +backend. Some host database backends used apparently do not support specifying +several reservations for the same IP address in a subnet. The administrator +should either stop using the backend that does not support this setting or set +the value of the ip-reservations-unique to true to resolve the configuration +issue. + +% DHCPSRV_CFGMGR_IPV6_RESERVATIONS_NON_UNIQUE_IGNORED ignoring "ip-reservations-unique" setting because at least one of the host database backends does not support non unique IP reservations in a subnet +This warning message is issued when the server failed to use the new setting +of the ip-reservations-unique global parameter configured via the configuration +backend. Some host database backends used apparently do not support specifying +several reservations for the same IP address or delegated prefix in a subnet. +The administrator should either stop using the backend that does not support +this setting or set the value of the ip-reservations-unique to true to resolve +the configuration issue. + +% DHCPSRV_CFGMGR_IP_RESERVATIONS_UNIQUE_DUPLICATES_POSSIBLE setting "ip-reservations-unique" from false to true poses a risk that some host backends may still contain multiple reservations for the same IP address +This warning message is issued when the DHCP server is configured to not allow +multiple reservations for the same IP address. However, the host database +backends may still contain multiple reservations for the same IP addresses +causing problems with lease allocation for certain addresses. Please ensure +that all such duplicates are removed. + +% DHCPSRV_CFGMGR_NEW_SUBNET4 a new subnet has been added to configuration: %1 +This is an informational message reporting that the configuration has +been extended to include the specified IPv4 subnet. + +% DHCPSRV_CFGMGR_NEW_SUBNET6 a new subnet has been added to configuration: %1 +This is an informational message reporting that the configuration has +been extended to include the specified subnet. + +% DHCPSRV_CFGMGR_NO_SUBNET4 no suitable subnet is defined for address hint %1 +This debug message is output when the DHCP configuration manager has received +a request for an IPv4 subnet for the specified address, but no such +subnet exists. + +% DHCPSRV_CFGMGR_NO_SUBNET6 no suitable subnet is defined for address hint %1 +This debug message is output when the DHCP configuration manager has received +a request for an IPv6 subnet for the specified address, but no such +subnet exists. + +% DHCPSRV_CFGMGR_ONLY_SUBNET4 retrieved subnet %1 for address hint %2 +This is a debug message reporting that the DHCP configuration manager has +returned the specified IPv4 subnet when given the address hint specified +because it is the only subnet defined. + +% DHCPSRV_CFGMGR_ONLY_SUBNET6 retrieved subnet %1 for address hint %2 +This is a debug message reporting that the DHCP configuration manager has +returned the specified IPv6 subnet when given the address hint specified +because it is the only subnet defined. + +% DHCPSRV_CFGMGR_OPTION_DUPLICATE multiple options with the code: %1 added to the subnet: %2 +This warning message is issued on an attempt to configure multiple options with the +same option code for the particular subnet. Adding multiple options is uncommon +for DHCPv6, but it is not prohibited. + +% DHCPSRV_CFGMGR_RELAY_IP_ADDRESS_DEPRECATED "relay" uses "ip-address", which has been deprecated, please use "ip-addresses": %1 +This is debug message issued when the "relay" element being parse +contains "ip-address" rather than its replacement, "ip-addresses". +The server will still honor the value but users are encouraged to +move to the new list parameter. + +% DHCPSRV_CFGMGR_RENEW_GTR_REBIND in %1, the value of renew-timer %2 is greater than the value of rebind-timer %3, ignoring renew-timer +A warning message that indicates the configured renew-timer is greater +than the configured rebind-timer. The server will ignore the renew +timer value and send the rebind timer value only. This is considered +a non-fatal configuration error. + +% DHCPSRV_CFGMGR_SOCKET_RAW_UNSUPPORTED use of raw sockets is unsupported on this OS, UDP sockets will be used +This warning message is logged when the user specified that the +DHCPv4 server should use the raw sockets to receive the DHCP +messages and respond to the clients, but the use of raw sockets +is not supported on the particular environment. The raw sockets +are useful when the server must respond to the directly connected +clients which don't have an address yet. If the raw sockets are +not supported by Kea on the particular platform, Kea will fall +back to use of the IP/UDP sockets. The responses to +the directly connected clients will be broadcast. The responses +to relayed clients will be unicast as usual. + +% DHCPSRV_CFGMGR_SOCKET_TYPE_DEFAULT "dhcp-socket-type" not specified , using default socket type %1 +This informational message is logged when the administrator hasn't +specified the "dhcp-socket-type" parameter in configuration for interfaces. +In such case, the default socket type will be used. + +% DHCPSRV_CFGMGR_SOCKET_TYPE_SELECT using socket type %1 +This informational message is logged when the DHCPv4 server selects the +socket type to be used for all sockets that will be opened on the +interfaces. Typically, the socket type is specified by the server +administrator. If the socket type hasn't been specified, the raw +socket will be selected. If the raw socket has been selected but +Kea doesn't support the use of raw sockets on the particular +OS, it will use an UDP socket instead. + +% DHCPSRV_CFGMGR_SUBNET4 retrieved subnet %1 for address hint %2 +This is a debug message reporting that the DHCP configuration manager has +returned the specified IPv4 subnet when given the address hint specified +as the address is within the subnet. + +% DHCPSRV_CFGMGR_SUBNET4_ADDR selected subnet %1 for packet received by matching address %2 +This is a debug message reporting that the DHCP configuration manager +has returned the specified IPv4 subnet for a received packet. This particular +subnet was selected, because an IPv4 address was matched which belonged to that +subnet. + +% DHCPSRV_CFGMGR_SUBNET4_IFACE selected subnet %1 for packet received over interface %2 +This is a debug message reporting that the DHCP configuration manager +has returned the specified IPv4 subnet for a packet received over +the given interface. This particular subnet was selected, because it +was specified as being directly reachable over the given interface. (see +'interface' parameter in the subnet4 definition). + +% DHCPSRV_CFGMGR_SUBNET4_RELAY selected subnet %1, because of matching relay addr %2 +This is a debug message reporting that the DHCP configuration manager has +returned the specified IPv4 subnet, because detected relay agent address +matches value specified for this subnet. + +% DHCPSRV_CFGMGR_SUBNET6 retrieved subnet %1 for address hint %2 +This is a debug message reporting that the DHCP configuration manager has +returned the specified IPv6 subnet when given the address hint specified +as the address is within the subnet. + +% DHCPSRV_CFGMGR_SUBNET6_IFACE selected subnet %1 for packet received over interface %2 +This is a debug message reporting that the DHCP configuration manager +has returned the specified IPv6 subnet for a packet received over +given interface. This particular subnet was selected, because it +was specified as being directly reachable over given interface. (see +'interface' parameter in the subnet6 definition). + +% DHCPSRV_CFGMGR_SUBNET6_IFACE_ID selected subnet %1 (interface-id match) for incoming packet +This is a debug message reporting that the DHCP configuration manager +has returned the specified IPv6 subnet for a received packet. This particular +subnet was selected, because value of interface-id option matched what was +configured in the server's interface-id option for that selected subnet6. +(see 'interface-id' parameter in the subnet6 definition). + +% DHCPSRV_CFGMGR_SUBNET6_RELAY selected subnet %1, because of matching relay addr %2 +This is a debug message reporting that the DHCP configuration manager has +returned the specified IPv6 subnet, because detected relay agent address +matches value specified for this subnet. + +% DHCPSRV_CFGMGR_UNICAST_LINK_LOCAL specified link local address %1 for unicast traffic on interface %2 +This warning message is logged when user specified a link-local address to +receive unicast traffic. The warning message is issued because it is an +uncommon use. + +% DHCPSRV_CFGMGR_UPDATE_SUBNET4 updating subnet %1 (result %2) +A debug message reported when the DHCP configuration manager is updating the +specified IPv4 subnet in its current configuration. Subnet ID and result +(expected to be true) are displayed. + +% DHCPSRV_CFGMGR_UPDATE_SUBNET6 updating subnet %1 (result %2) +A debug message reported when the DHCP configuration manager is replacing the +specified IPv6 subnet in its current configuration. Subnet ID and result +(expected to be true) are displayed. + +% DHCPSRV_CFGMGR_USE_ADDRESS listening on address %1, on interface %2 +A message issued when the server is configured to listen on the explicitly specified +IP address on the given interface. + +% DHCPSRV_CFGMGR_USE_ALLOCATOR using the %1 allocator for %2 leases in subnet %3 +A message issued when the configuration manager starts using a given allocator +for a subnet. + +% DHCPSRV_CFGMGR_USE_UNICAST listening on unicast address %1, on interface %2 +An info message issued when configuring the DHCP server to listen on the unicast +address on the specific interface. + +% DHCPSRV_CLOSE_DB closing currently open %1 database +This is a debug message, issued when the DHCP server closes the currently +open lease database. It is issued at program shutdown and whenever +the database access parameters are changed: in the latter case, the +server closes the currently open database, and opens a database using +the new parameters. + +% DHCPSRV_CONFIGURED_SUBNET_WITHOUT_ID a subnet was configured without an id: %1 +A warning message issued when a subnet was configured with a zero or without +an id, causing the server to auto-generate it. Using auto-generated subnet +ids is now deprecated. Each configured subnet should have an explicit subnet id +specified with the "id" entry. The sole argument of this warning message contains +a subnet prefix. + +% DHCPSRV_DDNS_TTL_PERCENT_TOO_SMALL ddns-ttl-percent %1 of lease lifetime %2 is too small, ignoring it +A debug message issued when the DDNS TTL value calculated using the +ddns-ttl-percent is zero. Kea will ignore the value and calculate +the DDNS TTL as though ddsn-ttl-percent were not specified. The +value of ddns-ttl-percent and the lease lifetime are shown in +the message details. + +% DHCPSRV_DEPRECATED This configuration is using a deprecated feature: %1 +This warning is printed every time a deprecated feature (identified by the parameter) is +used. A deprecated feature is functional now, but there will be a future Kea release +where it will be completely removed. If you see this message it's not a reason for panic, +but you should consider your long term strategy to eventually stop using the deprecated +feature. + +% DHCPSRV_DHCP4O6_RECEIVED_BAD_PACKET received bad DHCPv4o6 packet: %1 +A bad DHCPv4o6 packet was received. + +% DHCPSRV_DHCP_DDNS_ERROR_EXCEPTION error handler for DHCP_DDNS IO generated an expected exception: %1 +This is an error message that occurs when an attempt to send a request to +kea-dhcp-ddns fails there registered error handler threw an uncaught exception. +This is a programmatic error which should not occur. By convention, the error +handler should not propagate exceptions. Please report this error. + +% DHCPSRV_DHCP_DDNS_HANDLER_NULL error handler for DHCP_DDNS IO is not set. +This is an error message that occurs when an attempt to send a request to +kea-dhcp-ddns fails and there is no registered error handler. This is a +programmatic error which should never occur and should be reported. + +% DHCPSRV_DHCP_DDNS_NCR_REJECTED NameChangeRequest rejected by the sender: %1, ncr: %2 +This is an error message indicating that NameChangeSender used to deliver DDNS +update requests to kea-dhcp-ddns rejected the request. This most likely cause +is the sender's queue has reached maximum capacity. This would imply that +requests are being generated faster than they can be delivered. + +% DHCPSRV_DHCP_DDNS_NCR_SENT NameChangeRequest sent to kea-dhcp-ddns: %1 +A debug message issued when a NameChangeRequest has been successfully sent to +kea-dhcp-ddns. + +% DHCPSRV_DHCP_DDNS_SENDER_STARTED NameChangeRequest sender has been started: %1 +An informational message issued when a communication with kea-dhcp-ddns has +been successfully started. + +% DHCPSRV_DHCP_DDNS_SENDER_STOPPED NameChangeRequest sender has been stopped. +An informational message issued when a communication with kea-dhcp-ddns has +been stopped. This normally occurs during reconfiguration and as part of normal +shutdown. It may occur if kea-dhcp-ddns communications break down. + +% DHCPSRV_DHCP_DDNS_SUSPEND_UPDATES DHCP_DDNS updates are being suspended. +This is a warning message indicating the DHCP_DDNS updates have been turned +off. This should only occur if IO errors communicating with kea-dhcp-ddns +have been experienced. Any such errors should have preceding entries in the +log with details. No further attempts to communicate with kea-dhcp-ddns will +be made without intervention. + +% DHCPSRV_HOOK_LEASE4_RECOVER_SKIP DHCPv4 lease %1 was not recovered from the declined state because a callout set the skip status. +This debug message is printed when a callout installed on lease4_recover +hook point set the next step status to SKIP. For this particular hook point, this +indicates that the server should not recover the lease from declined state. +The server will leave the lease as it is, in the declined state. The +server will attempt to recover it the next time decline recovery procedure +takes place. + +% DHCPSRV_HOOK_LEASE4_RENEW_SKIP DHCPv4 lease was not renewed because a callout set the skip flag. +This debug message is printed when a callout installed on lease4_renew +hook point set the skip flag. For this particular hook point, the setting +of the flag by a callout instructs the server to not renew a lease. The +server will use existing lease as it is, without extending its lifetime. + +% DHCPSRV_HOOK_LEASE4_SELECT_SKIP Lease4 creation was skipped, because of callout skip flag. +This debug message is printed when a callout installed on lease4_select +hook point sets the skip flag. It means that the server was told that +no lease4 should be assigned. The server will not put that lease in its +database and the client will get a NAK packet. + +% DHCPSRV_HOOK_LEASE6_EXTEND_SKIP DHCPv6 lease lifetime was not extended because a callout set the skip flag for message %1 +This debug message is printed when a callout installed on lease6_renew +or the lease6_rebind hook point set the skip flag. For this particular hook +point, the setting of the flag by a callout instructs the server to not +extend the lifetime for a lease. If the client requested renewal of multiple +leases (by sending multiple IA options), the server will skip the renewal +of the one in question and will proceed with other renewals as usual. + +% DHCPSRV_HOOK_LEASE6_RECOVER_SKIP DHCPv6 lease %1 was not recovered from declined state because a callout set the skip status. +This debug message is printed when a callout installed on lease6_recover +hook point set the next step status to SKIP. For this particular hook point, this +indicates that the server should not recover the lease from declined state. +The server will leave the lease as it is, in the declined state. The +server will attempt to recover it the next time decline recovery procedure +takes place. + +% DHCPSRV_HOOK_LEASE6_SELECT_SKIP Lease6 (non-temporary) creation was skipped, because of callout skip flag. +This debug message is printed when a callout installed on lease6_select +hook point sets the skip flag. It means that the server was told that +no lease6 should be assigned. The server will not put that lease in its +database and the client will get a NoAddrsAvail for that IA_NA option. + +% DHCPSRV_INVALID_ACCESS invalid database access string: %1 +This is logged when an attempt has been made to parse a database access string +and the attempt ended in error. The access string in question - which +should be of the form 'keyword=value keyword=value...' is included in +the message. + +% DHCPSRV_LEASE4_EXTENDED_INFO_SANITY_FAIL extended info for lease %1 failed checks (%2) +This error message is printed when a lease extended info failed to +pass sanity checks. The detail of the found problem was displayed and +the extended info deleted from the lease user context. + +% DHCPSRV_LEASE4_EXTENDED_INFO_UPGRADED extended info for lease %1 was upgraded +This debug message is printed when a lease extended info was upgraded. + +% DHCPSRV_LEASE6_EXTENDED_INFO_SANITY_FAIL extended info for lease %1 failed checks (%2) +This error message is printed when a lease extended info failed to +pass sanity checks. The detail of the found problem was displayed and +the extended info deleted from the lease user context. + +% DHCPSRV_LEASE6_EXTENDED_INFO_UPGRADED extended info for lease %1 was upgraded +This debug message is printed when a lease extended info was upgraded. + +% DHCPSRV_LEASE_MGR_CALLBACK_EXCEPTION exception occurred in a lease manager callback for callback type %1, subnet id %2, and lease %3: %4 +This warning message is printed when one of the callback functions registered +in the lease manager causes an error. The callback functions can serve +different purposes and they likely log the detailed error messages. This +error message possibly indicates an unhandled error. The first argument +indicates a callback type. The second argument prints the subnet id. +The third argument prints the lease for which the error has occurred. +The last argument prints the error text. + +% DHCPSRV_LEASE_MGR_CALLBACK_UNKNOWN_EXCEPTION unknown exception occurred in a lease manager callback for callback type %1, subnet id %2, and lease %3 +This warning message is printed when one of the callback functions registered +in the lease manager causes an unknown error. The callback functions can serve +different purposes and they likely log the detailed error messages. This +error message possibly indicates an unhandled error. The first argument +indicates a callback type. The second argument prints the subnet id. +The third argument prints the lease for which the error has occurred. +This log message variant contains no error text because it is triggered +by an unknown exception. + +% DHCPSRV_LEASE_SANITY_FAIL The lease %1 with subnet-id %2 failed subnet-id checks (%3). +This warning message is printed when the lease being loaded does not match the +configuration. Due to lease-checks value, the lease will be loaded, but +it will most likely be unused by Kea, as there is no subnet that matches +the IP address associated with the lease. + +% DHCPSRV_LEASE_SANITY_FAIL_DISCARD The lease %1 with subnet-id %2 failed subnet-id checks (%3) and was dropped. +This warning message is printed when a lease was loaded, but Kea was told +(by setting lease-checks parameter) to discard leases with inconsistent +data. The lease was discarded, because either there is no subnet configured +with matching subnet-id or the address of the lease does not belong to the +subnet. + +% DHCPSRV_LEASE_SANITY_FIXED The lease %1 with subnet-id %2 failed subnet-id checks, but was corrected to subnet-id %3. +This informational message is printed when a lease was loaded, but had +incorrect subnet-id value. The lease-checks parameter was set to a value +that told Kea to try to correct the problem. There is a matching subnet, +so Kea updated subnet-id and loaded the lease successfully. + +% DHCPSRV_MEMFILE_ADD_ADDR4 adding IPv4 lease with address %1 +A debug message issued when the server is about to add an IPv4 lease +with the specified address to the memory file backend database. + +% DHCPSRV_MEMFILE_ADD_ADDR6 adding IPv6 lease with address %1 +A debug message issued when the server is about to add an IPv6 lease +with the specified address to the memory file backend database. + +% DHCPSRV_MEMFILE_BEGIN_BUILD_EXTENDED_INFO_TABLES6 building extended info tables with %1 sanity check level%2, tables %3 +A debug message issued when the server is building extended info tables. +The extended info sanity check level, update in file when requested +and the fact tables are enabled or disabled are displayed. + +% DHCPSRV_MEMFILE_BEGIN_EXTRACT_EXTENDED_INFO4 extract extended info with %1 sanity check level%2 +A debug message issued when the server is extracting extended info. +The extended info sanity check level and update in file when requested +are displayed. + +% DHCPSRV_MEMFILE_BEGIN_TRANSACTION committing to memory file database +The code has issued a begin transaction call. For the memory file database +this is a no-op. + +% DHCPSRV_MEMFILE_BUILD_EXTENDED_INFO_TABLES6 building extended info tables saw %1 leases, extended info sanity checks modified %2 / updated %3 leases and %4 leases were entered into tables +Extended info tables build was finished. Some statistics are displayed, the +updated in database is returned to the command interface. + +% DHCPSRV_MEMFILE_BUILD_EXTENDED_INFO_TABLES6_ERROR building extended info tables got an exception on the lease for %1: %2 +An error message issued when the server is building extended info tables and +receives an exception processing a lease. + +% DHCPSRV_MEMFILE_COMMIT committing to memory file database +The code has issued a commit call. For the memory file database this is +a no-op. + +% DHCPSRV_MEMFILE_CONVERTING_LEASE_FILES running LFC now to convert lease files to the current schema: %1.%2 +A warning message issued when the server has detected lease files that need +to be either upgraded or downgraded to match the server's schema, and that +the server is automatically running the LFC process to perform the conversion. +This should only occur the first time the server is launched following a Kea +installation upgrade (or downgrade). + +% DHCPSRV_MEMFILE_DB opening memory file lease database: %1 +This informational message is logged when a DHCP server (either V4 or +V6) is about to open a memory file lease database. The parameters of +the connection including database name and username needed to access it +(but not the password if any) are logged. + +% DHCPSRV_MEMFILE_DELETE_ADDR deleting lease for address %1 +A debug message issued when the server is attempting to delete a lease +for the specified address from the memory file database for the specified +address. + +% DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago +A debug message issued when the server is removing reclaimed DHCPv4 +leases which have expired longer than a specified period of time. +The argument is the amount of time Kea waits after a reclaimed +lease expires before considering its removal. + +% DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago +A debug message issued when the server is removing reclaimed DHCPv6 +leases which have expired longer than a specified period of time. +The argument is the amount of time Kea waits after a reclaimed +lease expires before considering its removal. + +% DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED_START starting deletion of %1 expired-reclaimed leases +A debug message issued when the server has found expired-reclaimed +leases to be removed. The number of leases to be removed is logged +in the message. + +% DHCPSRV_MEMFILE_EXTRACT_EXTENDED_INFO4 extracting extended info saw %1 leases, extended info sanity checks modified %2 / updated %3 leases and %4 leases have relay or remote id +Extended info extraction was finished. Some statistics are displayed, the +updated in database is returned to the command interface. + +% DHCPSRV_MEMFILE_EXTRACT_EXTENDED_INFO4_ERROR extracting extended info got an exception on the lease for %1: %2 +A debug message issued when the server is extracting extended info and +receives an exception processing a lease. + +% DHCPSRV_MEMFILE_GET4 obtaining all IPv4 leases +A debug message issued when the server is attempting to obtain all IPv4 +leases from the memory file database. + +% DHCPSRV_MEMFILE_GET6 obtaining all IPv6 leases +A debug message issued when the server is attempting to obtain all IPv6 +leases from the memory file database. + +% DHCPSRV_MEMFILE_GET6_DUID obtaining IPv6 leases for DUID %1 +A debug message issued when the server is attempting to obtain IPv6 +leases from the memory file database for the DUID. + +% DHCPSRV_MEMFILE_GET_ADDR4 obtaining IPv4 lease for address %1 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the memory file database for the specified address. + +% DHCPSRV_MEMFILE_GET_ADDR6 obtaining IPv6 lease for address %1 and lease type %2 +A debug message issued when the server is attempting to obtain an IPv6 +lease from the memory file database for the specified address. + +% DHCPSRV_MEMFILE_GET_CLIENTID obtaining IPv4 leases for client ID %1 +A debug message issued when the server is attempting to obtain a set of +IPv4 leases from the memory file database for a client with the specified +client identification. + +% DHCPSRV_MEMFILE_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases +A debug message issued when the server is attempting to obtain expired +IPv4 leases to reclaim them. The maximum number of leases to be retrieved +is logged in the message. + +% DHCPSRV_MEMFILE_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases +A debug message issued when the server is attempting to obtain expired +IPv6 leases to reclaim them. The maximum number of leases to be retrieved +is logged in the message. + +% DHCPSRV_MEMFILE_GET_HOSTNAME4 obtaining IPv4 leases for hostname %1 +A debug message issued when the server is attempting to obtain a set of +IPv4 leases from the memory file database for a client with the specified +hostname. + +% DHCPSRV_MEMFILE_GET_HOSTNAME6 obtaining IPv6 leases for hostname %1 +A debug message issued when the server is attempting to obtain a set of +IPv6 leases from the memory file database for a client with the specified +hostname. + +% DHCPSRV_MEMFILE_GET_HWADDR obtaining IPv4 leases for hardware address %1 +A debug message issued when the server is attempting to obtain a set of +IPv4 leases from the memory file database for a client with the specified +hardware address. + +% DHCPSRV_MEMFILE_GET_IAID_DUID obtaining IPv6 leases for IAID %1 and DUID %2 and lease type %3 +A debug message issued when the server is attempting to obtain a set of IPv6 +leases from the memory file database for a client with the specified IAID +(Identity Association ID) and DUID (DHCP Unique Identifier). + +% DHCPSRV_MEMFILE_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3 and lease type %4 +A debug message issued when the server is attempting to obtain an IPv6 +lease from the memory file database for a client with the specified IAID +(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier). + +% DHCPSRV_MEMFILE_GET_LINKADDR6 obtaining at most %1 IPv6 leases starting from address %2 with link %3/%4 +A debug message issued when the server is attempting to obtain a page of +IPv6 leases beginning with the specified address within a link. + +% DHCPSRV_MEMFILE_GET_PAGE4 obtaining at most %1 IPv4 leases starting from address %2 +A debug message issued when the server is attempting to obtain a page +of leases beginning with the specified address. + +% DHCPSRV_MEMFILE_GET_PAGE6 obtaining at most %1 IPv6 leases starting from address %2 +A debug message issued when the server is attempting to obtain a page +of leases beginning with the specified address. + +% DHCPSRV_MEMFILE_GET_RELAYID4 obtaining at most %1 IPv4 leases starting from address %2 with relay id %3 and cltt between %4 and %5 +A debug message issued when the server is attempting to obtain a page of +IPv4 leases beginning with the specified address with a relay id and client +transaction time between start and end dates. + +% DHCPSRV_MEMFILE_GET_RELAYID6 obtaining at most %1 IPv6 leases starting from address %2 with relay id %3 and link %4/%5 +A debug message issued when the server is attempting to obtain a page of +IPv6 leases beginning with the specified address with a relay id and a link. + +% DHCPSRV_MEMFILE_GET_REMOTEID4 obtaining at most %1 IPv4 leases starting from address %2 with remote id %3 and cltt between %4 and %5 +A debug message issued when the server is attempting to obtain a page of +IPv4 leases beginning with the specified address with a remote id and +client transaction time between start and end dates. + +% DHCPSRV_MEMFILE_GET_REMOTEID6 obtaining at most %1 IPv6 leases starting from address %2 with remote id %3 and link %4/%5 +A debug message issued when the server is attempting to obtain a page of +IPv6 leases beginning with the specified address with a remote id and a link. + +% DHCPSRV_MEMFILE_GET_SUBID4 obtaining IPv4 leases for subnet ID %1 +A debug message issued when the server is attempting to obtain all IPv4 +leases for a given subnet identifier from the memory file database. + +% DHCPSRV_MEMFILE_GET_SUBID6 obtaining IPv6 leases for subnet ID %1 +A debug message issued when the server is attempting to obtain all IPv6 +leases for a given subnet identifier from the memory file database. + +% DHCPSRV_MEMFILE_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the memory file database for a client with the specified +subnet ID and client ID. + +% DHCPSRV_MEMFILE_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the memory file database for a client with the specified +subnet ID and hardware address. + +% DHCPSRV_MEMFILE_GET_VERSION obtaining schema version information +A debug message issued when the server is about to obtain schema version +information from the memory file database. + +% DHCPSRV_MEMFILE_LEASE_FILE_LOAD loading leases from file %1 +An info message issued when the server is about to start reading DHCP leases +from the lease file. All leases currently held in the memory will be +replaced by those read from the file. + +% DHCPSRV_MEMFILE_LEASE_LOAD loading lease %1 +A debug message issued when DHCP lease is being loaded from the file to memory. + +% DHCPSRV_MEMFILE_LEASE_LOAD_ROW_ERROR discarding row %1, error: %2 +An error message issued if the DHCP lease being loaded from the given row of +the lease file fails. The log message should contain the specific reason the +row was discarded. The server continues loading the remaining data. +This may indicate a corrupt lease file. + +% DHCPSRV_MEMFILE_LFC_EXECUTE executing Lease File Cleanup using: %1 +An informational message issued when the memfile lease database backend +starts a new process to perform Lease File Cleanup. + +% DHCPSRV_MEMFILE_LFC_LEASE_FILE_RENAME_FAIL failed to rename the current lease file %1 to %2, reason: %3 +An error message logged when the memfile lease database backend fails to +move the current lease file to a new file on which the cleanup should +be performed. This effectively means that the lease file cleanup +does not take place. + +% DHCPSRV_MEMFILE_LFC_LEASE_FILE_REOPEN_FAIL failed to reopen lease file %1 after preparing input file for lease file cleanup, reason: %2, new leases will not persist! +An error message logged when the memfile lease database backend +failed to re-open or re-create the lease file after renaming the +lease file for lease file cleanup. The server continues to +operate but leases do not persist to disk. + +% DHCPSRV_MEMFILE_LFC_SETUP setting up the Lease File Cleanup interval to %1 sec +An informational message logged when the memfile lease database backend +configures the LFC to be executed periodically. The argument holds the +interval in seconds in which the LFC will be executed. + +% DHCPSRV_MEMFILE_LFC_SPAWN_FAIL lease file cleanup failed to run because kea-lfc process couldn't be spawned +This error message is logged when the Kea server fails to run kea-lfc, +the program that cleans up the lease file. The server will try again the +next time a lease file cleanup is scheduled. Although this message should +not appear and the reason why it did investigated, the occasional failure +to start the lease file cleanup will not impact operations. Should the +failure persist however, the size of the lease file will increase without bound. + +% DHCPSRV_MEMFILE_LFC_START starting Lease File Cleanup +An informational message issued when the Memfile lease database backend +starts the periodic Lease File Cleanup. + +% DHCPSRV_MEMFILE_LFC_UNREGISTER_TIMER_FAILED failed to unregister timer 'memfile-lfc': %1 +This debug message is logged when Memfile backend fails to unregister +timer used for lease file cleanup scheduling. There are several reasons +why this could occur, although the most likely cause is that the system +is being shut down and some other component has unregistered the timer. +The message includes the reason for this error. + +% DHCPSRV_MEMFILE_NEEDS_DOWNGRADING version of lease file: %1 schema is later than version %2 +A warning message issued when the schema of the lease file loaded by the server +is newer than the memfile schema of the server. The server converts the lease +data from newer schemas to its schema as it is read, therefore the lease +information in use by the server will be correct. Note though, that any data +stored in newer schema fields will be dropped. What remains is for the +file itself to be rewritten using the current schema. + +% DHCPSRV_MEMFILE_NEEDS_UPGRADING version of lease file: %1 schema is earlier than version %2 +A warning message issued when the schema of the lease file loaded by the server +pre-dates the memfile schema of the server. Note that the server converts the +lease data from older schemas to the current schema as it is read, therefore +the lease information in use by the server will be correct. What remains is +for the file itself to be rewritten using the current schema. + +% DHCPSRV_MEMFILE_NO_STORAGE running in non-persistent mode, leases will be lost after restart +A warning message issued when writes of leases to disk have been disabled +in the configuration. This mode is useful for some kinds of performance +testing but should not be enabled in normal circumstances. Non-persistence +mode is enabled when 'persist4=no persist6=no' parameters are specified +in the database access string. + +% DHCPSRV_MEMFILE_READ_HWADDR_FAIL failed to read hardware address from lease file: %1 +A warning message issued when read attempt of the hardware address stored in +a disk file failed. The parameter should provide the exact nature of the failure. +The database read will continue, but that particular lease will no longer +have hardware address associated with it. + +% DHCPSRV_MEMFILE_ROLLBACK rolling back memory file database +The code has issued a rollback call. For the memory file database this is +a no-op. + +% DHCPSRV_MEMFILE_UPDATE_ADDR4 updating IPv4 lease for address %1 +A debug message issued when the server is attempting to update IPv4 +lease from the memory file database for the specified address. + +% DHCPSRV_MEMFILE_UPDATE_ADDR6 updating IPv6 lease for address %1 +A debug message issued when the server is attempting to update IPv6 +lease from the memory file database for the specified address. + +% DHCPSRV_MEMFILE_WIPE_LEASES4 removing all IPv4 leases from subnet %1 +This informational message is printed when removal of all leases from +specified IPv4 subnet is commencing. This is a result of receiving administrative +command. + +% DHCPSRV_MEMFILE_WIPE_LEASES4_FINISHED removing all IPv4 leases from subnet %1 finished, removed %2 leases +This informational message is printed when removal of all leases from +a specified IPv4 subnet has finished. The number of removed leases is +printed. + +% DHCPSRV_MEMFILE_WIPE_LEASES6 removing all IPv6 leases from subnet %1 +This informational message is printed when removal of all leases from +specified IPv6 subnet is commencing. This is a result of receiving administrative +command. + +% DHCPSRV_MEMFILE_WIPE_LEASES6_FINISHED removing all IPv6 leases from subnet %1 finished, removed %2 leases +This informational message is printed when removal of all leases from +a specified IPv6 subnet has finished. The number of removed leases is +printed. + +% DHCPSRV_MT_DISABLED_QUEUE_CONTROL disabling dhcp queue control when multi-threading is enabled. +This warning message is issued when dhcp queue control is disabled automatically +if multi-threading is enabled. These two options are incompatible and can not +both be enabled at the same time. + +% DHCPSRV_MULTIPLE_RAW_SOCKETS_PER_IFACE current configuration will result in opening multiple broadcast capable sockets on some interfaces and some DHCP messages may be duplicated +A warning message issued when the current configuration indicates that multiple +sockets, capable of receiving broadcast traffic, will be opened on some of the +interfaces. It must be noted that this may lead to receiving and processing +the same DHCP message multiple times, as it will be received by each socket +individually. + +% DHCPSRV_MYSQL_ADD_ADDR4 adding IPv4 lease with address %1 +A debug message issued when the server is about to add an IPv4 lease +with the specified address to the MySQL backend database. + +% DHCPSRV_MYSQL_ADD_ADDR6 adding IPv6 lease with address %1, lease type %2 +A debug message issued when the server is about to add an IPv6 lease +with the specified address to the MySQL backend database. + +% DHCPSRV_MYSQL_BEGIN_TRANSACTION committing to MySQL database +The code has issued a begin transaction call. + +% DHCPSRV_MYSQL_COMMIT committing to MySQL database +The code has issued a commit call. All outstanding transactions will be +committed to the database. Note that depending on the MySQL settings, +the commit may not include a write to disk. + +% DHCPSRV_MYSQL_DB opening MySQL lease database: %1 +This informational message is logged when a DHCP server (either V4 or +V6) is about to open a MySQL lease database. The parameters of the +connection including database name and username needed to access it +(but not the password if any) are logged. + +% DHCPSRV_MYSQL_DELETED_EXPIRED_RECLAIMED deleted %1 reclaimed leases from the database +A debug message issued when the server has removed a number of reclaimed +leases from the database. The number of removed leases is included in the +message. + +% DHCPSRV_MYSQL_DELETE_ADDR deleting lease for address %1 +A debug message issued when the server is attempting to delete a lease for +the specified address from the MySQL database for the specified address. + +% DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago +A debug message issued when the server is removing reclaimed DHCPv4 +leases which have expired longer than a specified period of time. +The argument is the amount of time Kea waits after a reclaimed +lease expires before considering its removal. + +% DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago +A debug message issued when the server is removing reclaimed DHCPv6 +leases which have expired longer than a specified period of time. +The argument is the amount of time Kea waits after a reclaimed +lease expires before considering its removal. + +% DHCPSRV_MYSQL_FATAL_ERROR Unrecoverable MySQL error occurred: %1 for <%2>, reason: %3 (error code: %4). +An error message indicating that communication with the MySQL database server +has been lost. If automatic recovery has been enabled, then the server will +attempt to recover the connectivity. If not the server will exit with a +non-zero exit code. The cause of such an error is most likely a network issue +or the MySQL server has gone down. + +% DHCPSRV_MYSQL_GET4 obtaining all IPv4 leases +A debug message issued when the server is attempting to obtain all IPv4 +leases from the MySQL database. + +% DHCPSRV_MYSQL_GET6 obtaining all IPv6 leases +A debug message issued when the server is attempting to obtain all IPv6 +leases from the MySQL database. + +% DHCPSRV_MYSQL_GET_ADDR4 obtaining IPv4 lease for address %1 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the MySQL database for the specified address. + +% DHCPSRV_MYSQL_GET_ADDR6 obtaining IPv6 lease for address %1, lease type %2 +A debug message issued when the server is attempting to obtain an IPv6 +lease from the MySQL database for the specified address. + +% DHCPSRV_MYSQL_GET_CLIENTID obtaining IPv4 leases for client ID %1 +A debug message issued when the server is attempting to obtain a set +of IPv4 leases from the MySQL database for a client with the specified +client identification. + +% DHCPSRV_MYSQL_GET_DUID obtaining IPv6 lease for duid %1, +A debug message issued when the server is attempting to obtain an IPv6 +lease from the MySQL database for the specified duid. + +% DHCPSRV_MYSQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases +A debug message issued when the server is attempting to obtain expired +IPv4 leases to reclaim them. The maximum number of leases to be retrieved +is logged in the message. + +% DHCPSRV_MYSQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases +A debug message issued when the server is attempting to obtain expired +IPv6 leases to reclaim them. The maximum number of leases to be retrieved +is logged in the message. + +% DHCPSRV_MYSQL_GET_HOSTNAME4 obtaining IPv4 leases for hostname %1 +A debug message issued when the server is attempting to obtain a set +of IPv4 leases from the MySQL database for a client with the specified +hostname. + +% DHCPSRV_MYSQL_GET_HOSTNAME6 obtaining IPv6 leases for hostname %1 +A debug message issued when the server is attempting to obtain a set +of IPv6 leases from the MySQL database for a client with the specified +hostname. + +% DHCPSRV_MYSQL_GET_HWADDR obtaining IPv4 leases for hardware address %1 +A debug message issued when the server is attempting to obtain a set +of IPv4 leases from the MySQL database for a client with the specified +hardware address. + +% DHCPSRV_MYSQL_GET_IAID_DUID obtaining IPv6 leases for IAID %1, DUID %2, lease type %3 +A debug message issued when the server is attempting to obtain a set of IPv6 +leases from the MySQL database for a client with the specified IAID (Identity +Association ID) and DUID (DHCP Unique Identifier). + +% DHCPSRV_MYSQL_GET_IAID_SUBID_DUID obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3, lease type %4 +A debug message issued when the server is attempting to obtain an IPv6 +lease from the MySQL database for a client with the specified IAID +(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier). + +% DHCPSRV_MYSQL_GET_LINKADDR6 obtaining at most %1 IPv6 leases starting from address %2 with link %3/%4 +A debug message issued when the server is attempting to obtain a page of +IPv6 leases beginning with the specified address within a link. + +% DHCPSRV_MYSQL_GET_PAGE4 obtaining at most %1 IPv4 leases starting from address %2 +A debug message issued when the server is attempting to obtain a page +of leases beginning with the specified address. + +% DHCPSRV_MYSQL_GET_PAGE6 obtaining at most %1 IPv6 leases starting from address %2 +A debug message issued when the server is attempting to obtain a page +of leases beginning with the specified address. + +% DHCPSRV_MYSQL_GET_RELAYID4 obtaining at most %1 IPv4 leases starting from address %2 with relay id %3 and cltt between %4 and %5 +A debug message issued when the server is attempting to obtain a page of +IPv4 leases beginning with the specified address with a relay id and client +transaction time between start and end dates. + +% DHCPSRV_MYSQL_GET_REMOTEID4 obtaining at most %1 IPv4 leases starting from address %2 with remote id %3 and cltt between %4 and %5 +A debug message issued when the server is attempting to obtain a page of +IPv4 leases beginning with the specified address with a remote id and client +transaction time between start and end dates. + +% DHCPSRV_MYSQL_GET_SUBID4 obtaining IPv4 leases for subnet ID %1 +A debug message issued when the server is attempting to obtain all IPv4 +leases for a given subnet identifier from the MySQL database. + +% DHCPSRV_MYSQL_GET_SUBID6 obtaining IPv6 leases for subnet ID %1 +A debug message issued when the server is attempting to obtain all IPv6 +leases for a given subnet identifier from the MySQL database. + +% DHCPSRV_MYSQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the MySQL database for a client with the specified subnet ID +and client ID. + +% DHCPSRV_MYSQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the MySQL database for a client with the specified subnet ID +and hardware address. + +% DHCPSRV_MYSQL_GET_VERSION obtaining schema version information +A debug message issued when the server is about to obtain schema version +information from the MySQL database. + +% DHCPSRV_MYSQL_HOST_DB opening MySQL hosts database: %1 +This informational message is logged when a DHCP server (either V4 or +V6) is about to open a MySQL hosts database. The parameters of the +connection including database name and username needed to access it +(but not the password if any) are logged. + +% DHCPSRV_MYSQL_HOST_DB_GET_VERSION obtaining schema version information for the MySQL hosts database +A debug message issued when the server is about to obtain schema version +information from the MySQL hosts database. + +% DHCPSRV_MYSQL_HOST_DB_READONLY MySQL host database opened for read access only +This informational message is issued when the user has configured the MySQL +database in read-only mode. Kea will not be able to insert or modify +host reservations but will be able to retrieve existing ones and +assign them to the clients communicating with the server. + +% DHCPSRV_MYSQL_HOST_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 +An error message issued when an attempt to reconnect has failed. + +% DHCPSRV_MYSQL_HOST_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds +An info message issued when the server is scheduling the next attempt to reconnect +to the database. This occurs when the server has lost database connectivity and +is attempting to reconnect automatically. + +% DHCPSRV_MYSQL_HOST_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success +An error message issued when the server failed to reconnect. Loss of connectivity +is typically a network or database server issue. + +% DHCPSRV_MYSQL_LEASE_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 +An error message issued when an attempt to reconnect has failed. + +% DHCPSRV_MYSQL_LEASE_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds +An info message issued when the server is scheduling the next attempt to reconnect +to the database. This occurs when the server has lost database connectivity and +is attempting to reconnect automatically. + +% DHCPSRV_MYSQL_LEASE_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success +An error message issued when the server failed to reconnect. Loss of connectivity +is typically a network or database server issue. + +% DHCPSRV_MYSQL_NEGATIVE_LEASES_STAT recount of leases returned a negative value +This warning message is issued when the recount of leases using counters +in the MySQL database returned a negative value. This shows a problem +which can be fixed only by an offline direct recount on the database. +This message is issued only once. + +% DHCPSRV_MYSQL_NO_TLS TLS was required but is not used +This error message is issued when TLS for the connection was required but +TLS is not used. + +% DHCPSRV_MYSQL_ROLLBACK rolling back MySQL database +The code has issued a rollback call. All outstanding transaction will +be rolled back and not committed to the database. + +% DHCPSRV_MYSQL_START_TRANSACTION starting new MySQL transaction +A debug message issued when a new MySQL transaction is being started. +This message is typically not issued when inserting data into a +single table because the server doesn't explicitly start +transactions in this case. This message is issued when data is +inserted into multiple tables with multiple INSERT statements +and there may be a need to rollback the whole transaction if +any of these INSERT statements fail. + +% DHCPSRV_MYSQL_TLS_CIPHER TLS cipher: %1 +A debug message issued when a new MySQL connected is created with TLS. +The TLS cipher name is logged. + +% DHCPSRV_MYSQL_UPDATE_ADDR4 updating IPv4 lease for address %1 +A debug message issued when the server is attempting to update IPv4 +lease from the MySQL database for the specified address. + +% DHCPSRV_MYSQL_UPDATE_ADDR6 updating IPv6 lease for address %1, lease type %2 +A debug message issued when the server is attempting to update IPv6 +lease from the MySQL database for the specified address. + +% DHCPSRV_MYSQL_UPGRADE_BINARY_ADDRESS6 upgrading IPv6 leases done in %1 pages with %2 updated leases +The server upgraded binary addresses. The number of pages and the +final count of updated leases are displayed. + +% DHCPSRV_MYSQL_UPGRADE_BINARY_ADDRESS6_ERROR upgrading binary address for IPv6 lease at %1 failed with %2 +An error message issued when the server failed to upgrade a binary address. +The address of the lease and the error message are displayed. + +% DHCPSRV_MYSQL_UPGRADE_BINARY_ADDRESS6_PAGE upgrading IPv6 lease binary addresses at page %1 starting at %2 (updated %3) +A debug message issued when the server upgrades IPv6 lease binary addresses. +The page number and started address, and the count of already updated leases +are displayed. + +% DHCPSRV_MYSQL_UPGRADE_EXTENDED_INFO4 upgrading IPv4 leases done in %1 pages with %2 updated leases +The server upgraded extended info. The number of pages and the final count of +updated leases are displayed. + +% DHCPSRV_MYSQL_UPGRADE_EXTENDED_INFO4_ERROR upgrading extending info for IPv4 lease at %1 failed with %2 +A debug message issued when the server failed to upgrade an extended info. +The address of the lease and the error message are displayed. + +% DHCPSRV_MYSQL_UPGRADE_EXTENDED_INFO4_PAGE upgrading IPv4 lease extended info at page %1 starting at %2 (updated %3) +A debug message issued when the server upgrades IPv4 lease extended info. +The page number and started address, and the count of already updated leases +are displayed. + +% DHCPSRV_NOTYPE_DB no 'type' keyword to determine database backend: %1 +This is an error message, logged when an attempt has been made to access +a database backend, but where no 'type' keyword has been included in +the access string. The access string (less any passwords) is included +in the message. + +% DHCPSRV_NO_SOCKETS_OPEN no interface configured to listen to DHCP traffic +This warning message is issued when the current server configuration specifies +no interfaces that the server should listen on, or when the specified interfaces are not +configured to receive the traffic. + +% DHCPSRV_OPEN_SOCKET_FAIL failed to open socket: %1 +A warning message issued when IfaceMgr fails to open and bind a socket. +The reason for the failure is appended as an argument of the log message. + +% DHCPSRV_PGSQL_ADD_ADDR4 adding IPv4 lease with address %1 +A debug message issued when the server is about to add an IPv4 lease +with the specified address to the PostgreSQL backend database. + +% DHCPSRV_PGSQL_ADD_ADDR6 adding IPv6 lease with address %1, lease type %2 +A debug message issued when the server is about to add an IPv6 lease +with the specified address to the PostgreSQL backend database. + +% DHCPSRV_PGSQL_BEGIN_TRANSACTION committing to PostgreSQL database +The code has issued a begin transaction call. + +% DHCPSRV_PGSQL_COMMIT committing to PostgreSQL database +The code has issued a commit call. All outstanding transactions will be +committed to the database. Note that depending on the PostgreSQL settings, +the commit may not include a write to disk. + +% DHCPSRV_PGSQL_DB opening PostgreSQL lease database: %1 +This informational message is logged when a DHCP server (either V4 or +V6) is about to open a PostgreSQL lease database. The parameters of the +connection including database name and username needed to access it +(but not the password if any) are logged. + +% DHCPSRV_PGSQL_DEALLOC_ERROR An error occurred deallocating SQL statements while closing the PostgreSQL lease database: %1 +This is an error message issued when a DHCP server (either V4 or V6) experienced +and error freeing database SQL resources as part of closing its connection to +the PostgreSQL database. The connection is closed as part of normal server +shutdown. This error is most likely a programmatic issue that is highly +unlikely to occur or negatively impact server operation. + +% DHCPSRV_PGSQL_DELETE_ADDR deleting lease for address %1 +A debug message issued when the server is attempting to delete a lease for +the specified address from the PostgreSQL database for the specified address. + +% DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED4 deleting reclaimed IPv4 leases that expired more than %1 seconds ago +A debug message issued when the server is removing reclaimed DHCPv4 +leases which have expired longer than a specified period of time. +The argument is the amount of time Kea waits after a reclaimed +lease expires before considering its removal. + +% DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED6 deleting reclaimed IPv6 leases that expired more than %1 seconds ago +A debug message issued when the server is removing reclaimed DHCPv6 +leases which have expired longer than a specified period of time. +The argument is the amount of time Kea waits after a reclaimed +lease expires before considering its removal. + +% DHCPSRV_PGSQL_FATAL_ERROR Unrecoverable PostgreSQL error occurred: Statement: <%1>, reason: %2 (error code: %3). +An error message indicating that communication with the PostgreSQL database server +has been lost. If automatic recovery has been enabled, then the server will +attempt to recover the connectivity. If not the server will exit with a +non-zero exit code. The cause of such an error is most likely a network issue +or the PostgreSQL server has gone down. + +% DHCPSRV_PGSQL_GET4 obtaining all IPv4 leases +A debug message issued when the server is attempting to obtain all IPv4 +leases from the PostgreSQL database. + +% DHCPSRV_PGSQL_GET6 obtaining all IPv6 leases +A debug message issued when the server is attempting to obtain all IPv6 +leases from the PostgreSQL database. + +% DHCPSRV_PGSQL_GET_ADDR4 obtaining IPv4 lease for address %1 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the PostgreSQL database for the specified address. + +% DHCPSRV_PGSQL_GET_ADDR6 obtaining IPv6 lease for address %1 (lease type %2) +A debug message issued when the server is attempting to obtain an IPv6 +lease from the PostgreSQL database for the specified address. + +% DHCPSRV_PGSQL_GET_CLIENTID obtaining IPv4 leases for client ID %1 +A debug message issued when the server is attempting to obtain a set +of IPv4 leases from the PostgreSQL database for a client with the specified +client identification. + +% DHCPSRV_PGSQL_GET_DUID obtaining IPv6 leases for DUID %1, +A debug message issued when the server is attempting to obtain a set of IPv6 +leases from the PostgreSQL database for a client with the specified DUID (DHCP Unique Identifier). + +% DHCPSRV_PGSQL_GET_EXPIRED4 obtaining maximum %1 of expired IPv4 leases +A debug message issued when the server is attempting to obtain expired +IPv4 leases to reclaim them. The maximum number of leases to be retrieved +is logged in the message. + +% DHCPSRV_PGSQL_GET_EXPIRED6 obtaining maximum %1 of expired IPv6 leases +A debug message issued when the server is attempting to obtain expired +IPv6 leases to reclaim them. The maximum number of leases to be retrieved +is logged in the message. + +% DHCPSRV_PGSQL_GET_HOSTNAME4 obtaining IPv4 leases for hostname %1 +A debug message issued when the server is attempting to obtain a set +of IPv4 leases from the PostgreSQL database for a client with the specified +hostname. + +% DHCPSRV_PGSQL_GET_HOSTNAME6 obtaining IPv6 leases for hostname %1 +A debug message issued when the server is attempting to obtain a set +of IPv6 leases from the PostgreSQL database for a client with the specified +hostname. + +% DHCPSRV_PGSQL_GET_HWADDR obtaining IPv4 leases for hardware address %1 +A debug message issued when the server is attempting to obtain a set +of IPv4 leases from the PostgreSQL database for a client with the specified +hardware address. + +% DHCPSRV_PGSQL_GET_IAID_DUID obtaining IPv4 leases for IAID %1 and DUID %2, lease type %3 +A debug message issued when the server is attempting to obtain a set of IPv6 +leases from the PostgreSQL database for a client with the specified IAID +(Identity Association ID) and DUID (DHCP Unique Identifier). + +% DHCPSRV_PGSQL_GET_IAID_SUBID_DUID obtaining IPv4 leases for IAID %1, Subnet ID %2, DUID %3, and lease type %4 +A debug message issued when the server is attempting to obtain an IPv6 +lease from the PostgreSQL database for a client with the specified IAID +(Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier). + +% DHCPSRV_PGSQL_GET_LINKADDR6 obtaining at most %1 IPv6 leases starting from address %2 with link %3/%4 +A debug message issued when the server is attempting to obtain a page of +IPv6 leases beginning with the specified address within a link. + +% DHCPSRV_PGSQL_GET_PAGE4 obtaining at most %1 IPv4 leases starting from address %2 +A debug message issued when the server is attempting to obtain a page +of leases beginning with the specified address. + +% DHCPSRV_PGSQL_GET_PAGE6 obtaining at most %1 IPv6 leases starting from address %2 +A debug message issued when the server is attempting to obtain a page +of leases beginning with the specified address. + +% DHCPSRV_PGSQL_GET_RELAYID4 obtaining at most %1 IPv4 leases starting from address %2 with relay id %3 and cltt between %4 and %5 +A debug message issued when the server is attempting to obtain a page of +IPv4 leases beginning with the specified address with a relay id and client +transaction time between start and end dates. + +% DHCPSRV_PGSQL_GET_REMOTEID4 obtaining at most %1 IPv4 leases starting from address %2 with remote id %3 and cltt between %4 and %5 +A debug message issued when the server is attempting to obtain a page of +IPv4 leases beginning with the specified address with a remote id and client +transaction time between start and end dates. + +% DHCPSRV_PGSQL_GET_SUBID4 obtaining IPv4 leases for subnet ID %1 +A debug message issued when the server is attempting to obtain all IPv4 +leases for a given subnet identifier from the PostgreSQL database. + +% DHCPSRV_PGSQL_GET_SUBID6 obtaining IPv6 leases for subnet ID %1 +A debug message issued when the server is attempting to obtain all IPv6 +leases for a given subnet identifier from the PostgreSQL database. + +% DHCPSRV_PGSQL_GET_SUBID_CLIENTID obtaining IPv4 lease for subnet ID %1 and client ID %2 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the PostgreSQL database for a client with the specified subnet ID +and client ID. + +% DHCPSRV_PGSQL_GET_SUBID_HWADDR obtaining IPv4 lease for subnet ID %1 and hardware address %2 +A debug message issued when the server is attempting to obtain an IPv4 +lease from the PostgreSQL database for a client with the specified subnet ID +and hardware address. + +% DHCPSRV_PGSQL_GET_VERSION obtaining schema version information +A debug message issued when the server is about to obtain schema version +information from the PostgreSQL database. + +% DHCPSRV_PGSQL_HOST_DB opening PostgreSQL hosts database: %1 +This informational message is logged when a DHCP server (either V4 or +V6) is about to open a PostgreSQL hosts database. The parameters of the +connection including database name and username needed to access it +(but not the password if any) are logged. + +% DHCPSRV_PGSQL_HOST_DB_GET_VERSION obtaining schema version information for the PostgreSQL hosts database +A debug message issued when the server is about to obtain schema version +information from the PostgreSQL hosts database. + +% DHCPSRV_PGSQL_HOST_DB_READONLY PostgreSQL host database opened for read access only +This informational message is issued when the user has configured the PostgreSQL +database in read-only mode. Kea will not be able to insert or modify +host reservations but will be able to retrieve existing ones and +assign them to the clients communicating with the server. + +% DHCPSRV_PGSQL_HOST_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 +An error message issued when an attempt to reconnect has failed. + +% DHCPSRV_PGSQL_HOST_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds +An info message issued when the server is scheduling the next attempt to reconnect +to the database. This occurs when the server has lost database connectivity and +is attempting to reconnect automatically. + +% DHCPSRV_PGSQL_HOST_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success +An error message issued when the server failed to reconnect. Loss of connectivity +is typically a network or database server issue. + +% DHCPSRV_PGSQL_LEASE_DB_RECONNECT_ATTEMPT_FAILED database reconnect failed: %1 +An error message issued when an attempt to reconnect has failed. + +% DHCPSRV_PGSQL_LEASE_DB_RECONNECT_ATTEMPT_SCHEDULE scheduling attempt %1 of %2 in %3 milliseconds +An info message issued when the server is scheduling the next attempt to reconnect +to the database. This occurs when the server has lost database connectivity and +is attempting to reconnect automatically. + +% DHCPSRV_PGSQL_LEASE_DB_RECONNECT_FAILED maximum number of database reconnect attempts: %1, has been exhausted without success +An error message issued when the server failed to reconnect. Loss of connectivity +is typically a network or database server issue. + +% DHCPSRV_PGSQL_NEGATIVE_LEASES_STAT recount of leases returned a negative value +This warning message is issued when the recount of leases using counters +in the PostgreSQL database returned a negative value. This shows a problem +which can be fixed only by an offline direct recount on the database. +This message is issued only once. + +% DHCPSRV_PGSQL_NO_TLS_SUPPORT Attempt to configure TLS (unsupported for PostgreSQL): %1 +This error message is printed when TLS support was required in the Kea +configuration: Kea was built with this feature disabled for PostgreSQL. +The parameters of the connection are logged. + +% DHCPSRV_PGSQL_ROLLBACK rolling back PostgreSQL database +The code has issued a rollback call. All outstanding transaction will +be rolled back and not committed to the database. + +% DHCPSRV_PGSQL_START_TRANSACTION starting a new PostgreSQL transaction +A debug message issued when a new PostgreSQL transaction is being started. +This message is typically not issued when inserting data into a +single table because the server doesn't explicitly start +transactions in this case. This message is issued when data is +inserted into multiple tables with multiple INSERT statements +and there may be a need to rollback the whole transaction if +any of these INSERT statements fail. + +% DHCPSRV_PGSQL_TLS_SUPPORT Attempt to configure TLS: %1 +This informational message is printed when TLS support was required in +the Kea configuration: The TLS support in PostgreSQL will be initialized but +its configuration is fully managed outside the C API. +The parameters of the connection are logged. + +% DHCPSRV_PGSQL_UPDATE_ADDR4 updating IPv4 lease for address %1 +A debug message issued when the server is attempting to update IPv4 +lease from the PostgreSQL database for the specified address. + +% DHCPSRV_PGSQL_UPDATE_ADDR6 updating IPv6 lease for address %1, lease type %2 +A debug message issued when the server is attempting to update IPv6 +lease from the PostgreSQL database for the specified address. + +% DHCPSRV_PGSQL_UPGRADE_BINARY_ADDRESS6 upgrading IPv6 leases done in %1 pages with %2 updated leases +The server upgraded binary addresses. The number of pages and the +final count of updated leases are displayed. + +% DHCPSRV_PGSQL_UPGRADE_BINARY_ADDRESS6_ERROR upgrading binary address for IPv6 lease at %1 failed with %2 +An error message issued when the server failed to upgrade a binary address. +The address of the lease and the error message are displayed. + +% DHCPSRV_PGSQL_UPGRADE_BINARY_ADDRESS6_PAGE upgrading IPv6 lease binary addresses at page %1 starting at %2 (updated %3) +A debug message issued when the server upgrades IPv6 lease binary addresses. +The page number and started address, and the count of already updated leases +are displayed. + +% DHCPSRV_PGSQL_UPGRADE_EXTENDED_INFO4 upgrading IPv4 leases done in %1 pages with %2 updated leases +The server upgraded extended info. The number of pages and the final count of +updated leases are displayed. + +% DHCPSRV_PGSQL_UPGRADE_EXTENDED_INFO4_ERROR upgrading extending info for IPv4 lease at %1 failed with %2 +A debug message issued when the server failed to upgrade an extended info. +The address of the lease and the error message are displayed. + +% DHCPSRV_PGSQL_UPGRADE_EXTENDED_INFO4_PAGE upgrading IPv4 lease extended info at page %1 starting at %2 (updated %3) +A debug message issued when the server upgrades IPv4 lease extended info. +The page number and started address, and the count of already updated leases +are displayed. + +% DHCPSRV_QUEUE_NCR %1: Name change request to %2 DNS entry queued: %3 +A debug message which is logged when the NameChangeRequest to add or remove +a DNS entries for a particular lease has been queued. The first argument +includes the client identification information. The second argument +indicates whether the DNS entry is to be added or removed. The third +argument carries the details of the NameChangeRequest. + +% DHCPSRV_QUEUE_NCR_FAILED %1: queuing %2 name change request failed for lease %3: %4 +This error message is logged when sending a NameChangeRequest +to DHCP DDNS failed. The first argument includes the client identification +information. The second argument indicates whether the DNS entry is to be +added or removed. The third argument specifies the leased address. The +last argument provides the reason for failure. + +% DHCPSRV_QUEUE_NCR_SKIP %1: skip queuing name change request for lease: %2 +This debug message is issued when the server decides to not queue the name +change request because the lease doesn't include the FQDN, the forward and +reverse update is disabled for this lease or the DNS updates are disabled +in the configuration. The first argument includes the client identification +information. The second argument includes the leased address. + +% DHCPSRV_SUBNET4O6_SELECT_FAILED Failed to select any subnet for the DHCPv4o6 packet +A debug message issued when the server was unable to select any subnet for the +DHCPv4o6 packet. + +% DHCPSRV_SUBNET4_SELECT_BY_ADDRESS_NO_MATCH No subnet matches address: %1 +A debug message issued when the server was unable to select a subnet using +the specified address. + +% DHCPSRV_SUBNET4_SELECT_BY_INTERFACE_NO_MATCH No subnet matches interface: %1 +A debug message issued when the server was unable to select a subnet using +the specified interface name. + +% DHCPSRV_SUBNET4_SELECT_BY_RELAY_ADDRESS_NO_MATCH No subnet matches relay address: %1 +A debug message issued when the server was unable to select a subnet using +the specified relay address. + +% DHCPSRV_SUBNET4_SELECT_NO_RAI_OPTIONS No RAI options found to use for subnet selection. +A debug message issued by the server when the client query does not include RAI +options suitable for use with subnet selection. + +% DHCPSRV_SUBNET4_SELECT_NO_RELAY_ADDRESS Relay address (giaddr) in client packet is empty. +A debug message issued when no relay address was specified to use for subnet +selection. + +% DHCPSRV_SUBNET4_SELECT_NO_USABLE_ADDRESS No subnet selected because no suitable address to use for subnet selection was found. +A debug message issued when the server was find a suitable address to use for +subnet selection. + +% DHCPSRV_SUBNET6_SELECT_BY_ADDRESS_NO_MATCH No subnet matches address: %1 +A debug message issued when the server was unable to select a subnet using +the specified address. + +% DHCPSRV_SUBNET6_SELECT_BY_INTERFACE_ID_NO_MATCH No subnet matches interface id: %1 +A debug message issued when the server was unable to select a subnet using +the specified interface id. + +% DHCPSRV_SUBNET6_SELECT_BY_INTERFACE_NO_MATCH No subnet matches interface: %1 +A debug message issued when the server was unable to select a subnet using +the specified interface name. + +% DHCPSRV_TIMERMGR_CALLBACK_FAILED running handler for timer %1 caused exception: %2 +This error message is emitted when the timer elapsed and the +operation associated with this timer has thrown an exception. +The timer name and the reason for exception is logged. + +% DHCPSRV_TIMERMGR_REGISTER_TIMER registering timer: %1, using interval: %2 ms +A debug message issued when the new interval timer is registered in +the Timer Manager. This timer will have a callback function +associated with it, and this function will be executed according +to the interval specified. The unique name of the timer and the +interval at which the callback function will be executed is +included in the message. + +% DHCPSRV_TIMERMGR_RUN_TIMER_OPERATION running operation for timer: %1 +A debug message issued when the Timer Manager is about to +run a periodic operation associated with the given timer. +An example of such operation is a periodic cleanup of +expired leases. The name of the timer is included in the +message. + +% DHCPSRV_TIMERMGR_START_TIMER starting timer: %1 +A debug message issued when the registered interval timer is +being started. If this operation is successful the timer will +periodically execute the operation associated with it. The +name of the started timer is included in the message. + +% DHCPSRV_TIMERMGR_STOP_TIMER stopping timer: %1 +A debug message issued when the registered interval timer is +being stopped. The timer remains registered and can be restarted +if necessary. The name of the timer is included in the message. + +% DHCPSRV_TIMERMGR_UNREGISTER_ALL_TIMERS unregistering all timers +A debug message issued when all registered interval timers are +being unregistered from the Timer Manager. + +% DHCPSRV_TIMERMGR_UNREGISTER_TIMER unregistering timer: %1 +A debug message issued when one of the registered interval timers +is unregistered from the Timer Manager. The name of the timer is +included in the message. + +% DHCPSRV_UNEXPECTED_NAME database access parameters passed through '%1', expected 'lease-database' +The parameters for access the lease database were passed to the server through +the named configuration parameter, but the code was expecting them to be +passed via the parameter named "lease-database". If the database opens +successfully, there is no impact on server operation. However, as this does +indicate an error in the source code, please submit a bug report. + +% DHCPSRV_UNKNOWN_DB unknown database type: %1 +The database access string specified a database type (given in the +message) that is unknown to the software. This is a configuration error. |