diff options
Diffstat (limited to 'src/sed/doc/sed.info-1')
| -rw-r--r-- | src/sed/doc/sed.info-1 | 1353 |
1 files changed, 1353 insertions, 0 deletions
diff --git a/src/sed/doc/sed.info-1 b/src/sed/doc/sed.info-1 new file mode 100644 index 0000000..dce6cf1 --- /dev/null +++ b/src/sed/doc/sed.info-1 @@ -0,0 +1,1353 @@ +This is ../../doc/sed.info, produced by makeinfo version 4.5 from +../../doc/sed.texi. + +INFO-DIR-SECTION Text creation and manipulation +START-INFO-DIR-ENTRY +* sed: (sed). Stream EDitor. + +END-INFO-DIR-ENTRY + +This file documents version 4.1.5 of GNU `sed', a stream editor. + + Copyright (C) 1998, 1999, 2001, 2002, 2003, 2004 Free Software +Foundation, Inc. + + This document is released under the terms of the GNU Free +Documentation License as published by the Free Software Foundation; +either version 1.1, or (at your option) any later version. + + You should have received a copy of the GNU Free Documentation +License along with GNU `sed'; see the file `COPYING.DOC'. If not, +write to the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02110-1301, USA. + + There are no Cover Texts and no Invariant Sections; this text, along +with its equivalent in the printed manual, constitutes the Title Page. + +File: sed.info, Node: Top, Next: Introduction, Up: (dir) + + + +This file documents version 4.1.5 of GNU `sed', a stream editor. + + Copyright (C) 1998, 1999, 2001, 2002, 2003, 2004 Free Software +Foundation, Inc. + + This document is released under the terms of the GNU Free +Documentation License as published by the Free Software Foundation; +either version 1.1, or (at your option) any later version. + + You should have received a copy of the GNU Free Documentation +License along with GNU `sed'; see the file `COPYING.DOC'. If not, +write to the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02110-1301, USA. + + There are no Cover Texts and no Invariant Sections; this text, along +with its equivalent in the printed manual, constitutes the Title Page. +* Menu: + +* Introduction:: Introduction +* Invoking sed:: Invocation +* sed Programs:: `sed' programs +* Examples:: Some sample scripts +* Limitations:: Limitations and (non-)limitations of GNU `sed' +* Other Resources:: Other resources for learning about `sed' +* Reporting Bugs:: Reporting bugs + +* Extended regexps:: `egrep'-style regular expressions + +* Concept Index:: A menu with all the topics in this manual. +* Command and Option Index:: A menu with all `sed' commands and + command-line options. + +--- The detailed node listing --- + +sed Programs: +* Execution Cycle:: How `sed' works +* Addresses:: Selecting lines with `sed' +* Regular Expressions:: Overview of regular expression syntax +* Common Commands:: Often used commands +* The "s" Command:: `sed''s Swiss Army Knife +* Other Commands:: Less frequently used commands +* Programming Commands:: Commands for `sed' gurus +* Extended Commands:: Commands specific of GNU `sed' +* Escapes:: Specifying special characters + +Examples: +* Centering lines:: +* Increment a number:: +* Rename files to lower case:: +* Print bash environment:: +* Reverse chars of lines:: +* tac:: Reverse lines of files +* cat -n:: Numbering lines +* cat -b:: Numbering non-blank lines +* wc -c:: Counting chars +* wc -w:: Counting words +* wc -l:: Counting lines +* head:: Printing the first lines +* tail:: Printing the last lines +* uniq:: Make duplicate lines unique +* uniq -d:: Print duplicated lines of input +* uniq -u:: Remove all duplicated lines +* cat -s:: Squeezing blank lines + + +File: sed.info, Node: Introduction, Next: Invoking sed, Prev: Top, Up: Top + +Introduction +************ + + `sed' is a stream editor. A stream editor is used to perform basic +text transformations on an input stream (a file or input from a +pipeline). While in some ways similar to an editor which permits +scripted edits (such as `ed'), `sed' works by making only one pass over +the input(s), and is consequently more efficient. But it is `sed''s +ability to filter text in a pipeline which particularly distinguishes +it from other types of editors. + + +File: sed.info, Node: Invoking sed, Next: sed Programs, Prev: Introduction, Up: Top + +Invocation +********** + + Normally `sed' is invoked like this: + + sed SCRIPT INPUTFILE... + + The full format for invoking `sed' is: + + sed OPTIONS... [SCRIPT] [INPUTFILE...] + + If you do not specify INPUTFILE, or if INPUTFILE is `-', `sed' +filters the contents of the standard input. The SCRIPT is actually the +first non-option parameter, which `sed' specially considers a script +and not an input file if (and only if) none of the other OPTIONS +specifies a script to be executed, that is if neither of the `-e' and +`-f' options is specified. + + `sed' may be invoked with the following command-line options: + +`--version' + Print out the version of `sed' that is being run and a copyright + notice, then exit. + +`--help' + Print a usage message briefly summarizing these command-line + options and the bug-reporting address, then exit. + +`-n' +`--quiet' +`--silent' + By default, `sed' prints out the pattern space at the end of each + cycle through the script. These options disable this automatic + printing, and `sed' only produces output when explicitly told to + via the `p' command. + +`-i[SUFFIX]' +`--in-place[=SUFFIX]' + This option specifies that files are to be edited in-place. GNU + `sed' does this by creating a temporary file and sending output to + this file rather than to the standard output.(1). + + This option implies `-s'. + + When the end of the file is reached, the temporary file is renamed + to the output file's original name. The extension, if supplied, + is used to modify the name of the old file before renaming the + temporary file, thereby making a backup copy(2)). + + This rule is followed: if the extension doesn't contain a `*', + then it is appended to the end of the current filename as a + suffix; if the extension does contain one or more `*' characters, + then _each_ asterisk is replaced with the current filename. This + allows you to add a prefix to the backup file, instead of (or in + addition to) a suffix, or even to place backup copies of the + original files into another directory (provided the directory + already exists). + + If no extension is supplied, the original file is overwritten + without making a backup. + +`-l N' +`--line-length=N' + Specify the default line-wrap length for the `l' command. A + length of 0 (zero) means to never wrap long lines. If not + specified, it is taken to be 70. + +`--posix' + GNU `sed' includes several extensions to POSIX sed. In order to + simplify writing portable scripts, this option disables all the + extensions that this manual documents, including additional + commands. Most of the extensions accept `sed' programs that are + outside the syntax mandated by POSIX, but some of them (such as + the behavior of the `N' command described in *note Reporting + Bugs::) actually violate the standard. If you want to disable + only the latter kind of extension, you can set the + `POSIXLY_CORRECT' variable to a non-empty value. + +`-r' +`--regexp-extended' + Use extended regular expressions rather than basic regular + expressions. Extended regexps are those that `egrep' accepts; + they can be clearer because they usually have less backslashes, + but are a GNU extension and hence scripts that use them are not + portable. *Note Extended regular expressions: Extended regexps. + +`-s' +`--separate' + By default, `sed' will consider the files specified on the command + line as a single continuous long stream. This GNU `sed' extension + allows the user to consider them as separate files: range + addresses (such as `/abc/,/def/') are not allowed to span several + files, line numbers are relative to the start of each file, `$' + refers to the last line of each file, and files invoked from the + `R' commands are rewound at the start of each file. + +`-u' +`--unbuffered' + Buffer both input and output as minimally as practical. (This is + particularly useful if the input is coming from the likes of `tail + -f', and you wish to see the transformed output as soon as + possible.) + +`-e SCRIPT' +`--expression=SCRIPT' + Add the commands in SCRIPT to the set of commands to be run while + processing the input. + +`-f SCRIPT-FILE' +`--file=SCRIPT-FILE' + Add the commands contained in the file SCRIPT-FILE to the set of + commands to be run while processing the input. + + + If no `-e', `-f', `--expression', or `--file' options are given on +the command-line, then the first non-option argument on the command +line is taken to be the SCRIPT to be executed. + + If any command-line parameters remain after processing the above, +these parameters are interpreted as the names of input files to be +processed. A file name of `-' refers to the standard input stream. +The standard input will be processed if no file names are specified. + + ---------- Footnotes ---------- + + (1) This applies to commands such as `=', `a', `c', `i', `l', `p'. +You can still write to the standard output by using the `w' or `W' +commands together with the `/dev/stdout' special file + + (2) Note that GNU `sed' creates the backup file whether or not +any output is actually changed. + + +File: sed.info, Node: sed Programs, Next: Examples, Prev: Invoking sed, Up: Top + +`sed' Programs +************** + + A `sed' program consists of one or more `sed' commands, passed in by +one or more of the `-e', `-f', `--expression', and `--file' options, or +the first non-option argument if zero of these options are used. This +document will refer to "the" `sed' script; this is understood to mean +the in-order catenation of all of the SCRIPTs and SCRIPT-FILEs passed +in. + + Each `sed' command consists of an optional address or address range, +followed by a one-character command name and any additional +command-specific code. + +* Menu: + +* Execution Cycle:: How `sed' works +* Addresses:: Selecting lines with `sed' +* Regular Expressions:: Overview of regular expression syntax +* Common Commands:: Often used commands +* The "s" Command:: `sed''s Swiss Army Knife +* Other Commands:: Less frequently used commands +* Programming Commands:: Commands for `sed' gurus +* Extended Commands:: Commands specific of GNU `sed' +* Escapes:: Specifying special characters + + +File: sed.info, Node: Execution Cycle, Next: Addresses, Up: sed Programs + +How `sed' Works +=============== + + `sed' maintains two data buffers: the active _pattern_ space, and +the auxiliary _hold_ space. Both are initially empty. + + `sed' operates by performing the following cycle on each lines of +input: first, `sed' reads one line from the input stream, removes any +trailing newline, and places it in the pattern space. Then commands +are executed; each command can have an address associated to it: +addresses are a kind of condition code, and a command is only executed +if the condition is verified before the command is to be executed. + + When the end of the script is reached, unless the `-n' option is in +use, the contents of pattern space are printed out to the output +stream, adding back the trailing newline if it was removed.(1) Then the +next cycle starts for the next input line. + + Unless special commands (like `D') are used, the pattern space is +deleted between two cycles. The hold space, on the other hand, keeps +its data between cycles (see commands `h', `H', `x', `g', `G' to move +data between both buffers). + + ---------- Footnotes ---------- + + (1) Actually, if `sed' prints a line without the terminating +newline, it will nevertheless print the missing newline as soon as +more text is sent to the same output stream, which gives the "least +expected surprise" even though it does not make commands like `sed -n +p' exactly identical to `cat'. + + +File: sed.info, Node: Addresses, Next: Regular Expressions, Prev: Execution Cycle, Up: sed Programs + +Selecting lines with `sed' +========================== + + Addresses in a `sed' script can be in any of the following forms: +`NUMBER' + Specifying a line number will match only that line in the input. + (Note that `sed' counts lines continuously across all input files + unless `-i' or `-s' options are specified.) + +`FIRST~STEP' + This GNU extension matches every STEPth line starting with line + FIRST. In particular, lines will be selected when there exists a + non-negative N such that the current line-number equals FIRST + (N + * STEP). Thus, to select the odd-numbered lines, one would use + `1~2'; to pick every third line starting with the second, `2~3' + would be used; to pick every fifth line starting with the tenth, + use `10~5'; and `50~0' is just an obscure way of saying `50'. + +`$' + This address matches the last line of the last file of input, or + the last line of each file when the `-i' or `-s' options are + specified. + +`/REGEXP/' + This will select any line which matches the regular expression + REGEXP. If REGEXP itself includes any `/' characters, each must + be escaped by a backslash (`\'). + + The empty regular expression `//' repeats the last regular + expression match (the same holds if the empty regular expression is + passed to the `s' command). Note that modifiers to regular + expressions are evaluated when the regular expression is compiled, + thus it is invalid to specify them together with the empty regular + expression. + +`\%REGEXP%' + (The `%' may be replaced by any other single character.) + + This also matches the regular expression REGEXP, but allows one to + use a different delimiter than `/'. This is particularly useful + if the REGEXP itself contains a lot of slashes, since it avoids + the tedious escaping of every `/'. If REGEXP itself includes any + delimiter characters, each must be escaped by a backslash (`\'). + +`/REGEXP/I' +`\%REGEXP%I' + The `I' modifier to regular-expression matching is a GNU extension + which causes the REGEXP to be matched in a case-insensitive manner. + +`/REGEXP/M' +`\%REGEXP%M' + The `M' modifier to regular-expression matching is a GNU `sed' + extension which causes `^' and `$' to match respectively (in + addition to the normal behavior) the empty string after a newline, + and the empty string before a newline. There are special character + sequences (`\`' and `\'') which always match the beginning or the + end of the buffer. `M' stands for `multi-line'. + + + If no addresses are given, then all lines are matched; if one +address is given, then only lines matching that address are matched. + + An address range can be specified by specifying two addresses +separated by a comma (`,'). An address range matches lines starting +from where the first address matches, and continues until the second +address matches (inclusively). + + If the second address is a REGEXP, then checking for the ending +match will start with the line _following_ the line which matched the +first address: a range will always span at least two lines (except of +course if the input stream ends). + + If the second address is a NUMBER less than (or equal to) the line +matching the first address, then only the one line is matched. + + GNU `sed' also supports some special two-address forms; all these +are GNU extensions: +`0,/REGEXP/' + A line number of `0' can be used in an address specification like + `0,/REGEXP/' so that `sed' will try to match REGEXP in the first + input line too. In other words, `0,/REGEXP/' is similar to + `1,/REGEXP/', except that if ADDR2 matches the very first line of + input the `0,/REGEXP/' form will consider it to end the range, + whereas the `1,/REGEXP/' form will match the beginning of its + range and hence make the range span up to the _second_ occurrence + of the regular expression. + + Note that this is the only place where the `0' address makes + sense; there is no 0-th line and commands which are given the `0' + address in any other way will give an error. + +`ADDR1,+N' + Matches ADDR1 and the N lines following ADDR1. + +`ADDR1,~N' + Matches ADDR1 and the lines following ADDR1 until the next line + whose input line number is a multiple of N. + + Appending the `!' character to the end of an address specification +negates the sense of the match. That is, if the `!' character follows +an address range, then only lines which do _not_ match the address range +will be selected. This also works for singleton addresses, and, +perhaps perversely, for the null address. + + +File: sed.info, Node: Regular Expressions, Next: Common Commands, Prev: Addresses, Up: sed Programs + +Overview of Regular Expression Syntax +===================================== + + To know how to use `sed', people should understand regular +expressions ("regexp" for short). A regular expression is a pattern +that is matched against a subject string from left to right. Most +characters are "ordinary": they stand for themselves in a pattern, and +match the corresponding characters in the subject. As a trivial +example, the pattern + + The quick brown fox + +matches a portion of a subject string that is identical to itself. The +power of regular expressions comes from the ability to include +alternatives and repetitions in the pattern. These are encoded in the +pattern by the use of "special characters", which do not stand for +themselves but instead are interpreted in some special way. Here is a +brief description of regular expression syntax as used in `sed'. + +`CHAR' + A single ordinary character matches itself. + +`*' + Matches a sequence of zero or more instances of matches for the + preceding regular expression, which must be an ordinary character, + a special character preceded by `\', a `.', a grouped regexp (see + below), or a bracket expression. As a GNU extension, a postfixed + regular expression can also be followed by `*'; for example, `a**' + is equivalent to `a*'. POSIX 1003.1-2001 says that `*' stands for + itself when it appears at the start of a regular expression or + subexpression, but many nonGNU implementations do not support this + and portable scripts should instead use `\*' in these contexts. + +`\+' + As `*', but matches one or more. It is a GNU extension. + +`\?' + As `*', but only matches zero or one. It is a GNU extension. + +`\{I\}' + As `*', but matches exactly I sequences (I is a decimal integer; + for portability, keep it between 0 and 255 inclusive). + +`\{I,J\}' + Matches between I and J, inclusive, sequences. + +`\{I,\}' + Matches more than or equal to I sequences. + +`\(REGEXP\)' + Groups the inner REGEXP as a whole, this is used to: + + * Apply postfix operators, like `\(abcd\)*': this will search + for zero or more whole sequences of `abcd', while `abcd*' + would search for `abc' followed by zero or more occurrences + of `d'. Note that support for `\(abcd\)*' is required by + POSIX 1003.1-2001, but many non-GNU implementations do not + support it and hence it is not universally portable. + + * Use back references (see below). + +`.' + Matches any character, including newline. + +`^' + Matches the null string at beginning of line, i.e. what appears + after the circumflex must appear at the beginning of line. + `^#include' will match only lines where `#include' is the first + thing on line--if there are spaces before, for example, the match + fails. `^' acts as a special character only at the beginning of + the regular expression or subexpression (that is, after `\(' or + `\|'). Portable scripts should avoid `^' at the beginning of a + subexpression, though, as POSIX allows implementations that treat + `^' as an ordinary character in that context. + +`$' + It is the same as `^', but refers to end of line. `$' also acts + as a special character only at the end of the regular expression + or subexpression (that is, before `\)' or `\|'), and its use at + the end of a subexpression is not portable. + +`[LIST]' +`[^LIST]' + Matches any single character in LIST: for example, `[aeiou]' + matches all vowels. A list may include sequences like + `CHAR1-CHAR2', which matches any character between (inclusive) + CHAR1 and CHAR2. + + A leading `^' reverses the meaning of LIST, so that it matches any + single character _not_ in LIST. To include `]' in the list, make + it the first character (after the `^' if needed), to include `-' + in the list, make it the first or last; to include `^' put it + after the first character. + + The characters `$', `*', `.', `[', and `\' are normally not + special within LIST. For example, `[\*]' matches either `\' or + `*', because the `\' is not special here. However, strings like + `[.ch.]', `[=a=]', and `[:space:]' are special within LIST and + represent collating symbols, equivalence classes, and character + classes, respectively, and `[' is therefore special within LIST + when it is followed by `.', `=', or `:'. Also, when not in + `POSIXLY_CORRECT' mode, special escapes like `\n' and `\t' are + recognized within LIST. *Note Escapes::. + +`REGEXP1\|REGEXP2' + Matches either REGEXP1 or REGEXP2. Use parentheses to use complex + alternative regular expressions. The matching process tries each + alternative in turn, from left to right, and the first one that + succeeds is used. It is a GNU extension. + +`REGEXP1REGEXP2' + Matches the concatenation of REGEXP1 and REGEXP2. Concatenation + binds more tightly than `\|', `^', and `$', but less tightly than + the other regular expression operators. + +`\DIGIT' + Matches the DIGIT-th `\(...\)' parenthesized subexpression in the + regular expression. This is called a "back reference". + Subexpressions are implicity numbered by counting occurrences of + `\(' left-to-right. + +`\n' + Matches the newline character. + +`\CHAR' + Matches CHAR, where CHAR is one of `$', `*', `.', `[', `\', or `^'. + Note that the only C-like backslash sequences that you can + portably assume to be interpreted are `\n' and `\\'; in particular + `\t' is not portable, and matches a `t' under most implementations + of `sed', rather than a tab character. + + + Note that the regular expression matcher is greedy, i.e., matches +are attempted from left to right and, if two or more matches are +possible starting at the same character, it selects the longest. + +Examples: +`abcdef' + Matches `abcdef'. + +`a*b' + Matches zero or more `a's followed by a single `b'. For example, + `b' or `aaaaab'. + +`a\?b' + Matches `b' or `ab'. + +`a\+b\+' + Matches one or more `a's followed by one or more `b's: `ab' is the + shortest possible match, but other examples are `aaaab' or + `abbbbb' or `aaaaaabbbbbbb'. + +`.*' +`.\+' + These two both match all the characters in a string; however, the + first matches every string (including the empty string), while the + second matches only strings containing at least one character. + +`^main.*(.*)' + his matches a string starting with `main', followed by an opening + and closing parenthesis. The `n', `(' and `)' need not be + adjacent. + +`^#' + This matches a string beginning with `#'. + +`\\$' + This matches a string ending with a single backslash. The regexp + contains two backslashes for escaping. + +`\$' + Instead, this matches a string consisting of a single dollar sign, + because it is escaped. + +`[a-zA-Z0-9]' + In the C locale, this matches any ASCII letters or digits. + +`[^ tab]\+' + (Here `tab' stands for a single tab character.) This matches a + string of one or more characters, none of which is a space or a + tab. Usually this means a word. + +`^\(.*\)\n\1$' + This matches a string consisting of two equal substrings separated + by a newline. + +`.\{9\}A$' + This matches nine characters followed by an `A'. + +`^.\{15\}A' + This matches the start of a string that contains 16 characters, + the last of which is an `A'. + + + +File: sed.info, Node: Common Commands, Next: The "s" Command, Prev: Regular Expressions, Up: sed Programs + +Often-Used Commands +=================== + + If you use `sed' at all, you will quite likely want to know these +commands. + +`#' + [No addresses allowed.] + + The `#' character begins a comment; the comment continues until + the next newline. + + If you are concerned about portability, be aware that some + implementations of `sed' (which are not POSIX conformant) may only + support a single one-line comment, and then only when the very + first character of the script is a `#'. + + Warning: if the first two characters of the `sed' script are `#n', + then the `-n' (no-autoprint) option is forced. If you want to put + a comment in the first line of your script and that comment begins + with the letter `n' and you do not want this behavior, then be + sure to either use a capital `N', or place at least one space + before the `n'. + +`q [EXIT-CODE]' + This command only accepts a single address. + + Exit `sed' without processing any more commands or input. Note + that the current pattern space is printed if auto-print is not + disabled with the `-n' options. The ability to return an exit + code from the `sed' script is a GNU `sed' extension. + +`d' + Delete the pattern space; immediately start next cycle. + +`p' + Print out the pattern space (to the standard output). This + command is usually only used in conjunction with the `-n' + command-line option. + +`n' + If auto-print is not disabled, print the pattern space, then, + regardless, replace the pattern space with the next line of input. + If there is no more input then `sed' exits without processing any + more commands. + +`{ COMMANDS }' + A group of commands may be enclosed between `{' and `}' characters. + This is particularly useful when you want a group of commands to + be triggered by a single address (or address-range) match. + + + +File: sed.info, Node: The "s" Command, Next: Other Commands, Prev: Common Commands, Up: sed Programs + +The `s' Command +=============== + + The syntax of the `s' (as in substitute) command is +`s/REGEXP/REPLACEMENT/FLAGS'. The `/' characters may be uniformly +replaced by any other single character within any given `s' command. +The `/' character (or whatever other character is used in its stead) +can appear in the REGEXP or REPLACEMENT only if it is preceded by a `\' +character. + + The `s' command is probably the most important in `sed' and has a +lot of different options. Its basic concept is simple: the `s' command +attempts to match the pattern space against the supplied REGEXP; if the +match is successful, then that portion of the pattern space which was +matched is replaced with REPLACEMENT. + + The REPLACEMENT can contain `\N' (N being a number from 1 to 9, +inclusive) references, which refer to the portion of the match which is +contained between the Nth `\(' and its matching `\)'. Also, the +REPLACEMENT can contain unescaped `&' characters which reference the +whole matched portion of the pattern space. Finally, as a GNU `sed' +extension, you can include a special sequence made of a backslash and +one of the letters `L', `l', `U', `u', or `E'. The meaning is as +follows: + +`\L' + Turn the replacement to lowercase until a `\U' or `\E' is found, + +`\l' + Turn the next character to lowercase, + +`\U' + Turn the replacement to uppercase until a `\L' or `\E' is found, + +`\u' + Turn the next character to uppercase, + +`\E' + Stop case conversion started by `\L' or `\U'. + + To include a literal `\', `&', or newline in the final replacement, +be sure to precede the desired `\', `&', or newline in the REPLACEMENT +with a `\'. + + The `s' command can be followed by zero or more of the following +FLAGS: + +`g' + Apply the replacement to _all_ matches to the REGEXP, not just the + first. + +`NUMBER' + Only replace the NUMBERth match of the REGEXP. + + Note: the POSIX standard does not specify what should happen when + you mix the `g' and NUMBER modifiers, and currently there is no + widely agreed upon meaning across `sed' implementations. For GNU + `sed', the interaction is defined to be: ignore matches before the + NUMBERth, and then match and replace all matches from the NUMBERth + on. + +`p' + If the substitution was made, then print the new pattern space. + + Note: when both the `p' and `e' options are specified, the + relative ordering of the two produces very different results. In + general, `ep' (evaluate then print) is what you want, but + operating the other way round can be useful for debugging. For + this reason, the current version of GNU `sed' interprets specially + the presence of `p' options both before and after `e', printing + the pattern space before and after evaluation, while in general + flags for the `s' command show their effect just once. This + behavior, although documented, might change in future versions. + +`w FILE-NAME' + If the substitution was made, then write out the result to the + named file. As a GNU `sed' extension, two special values of + FILE-NAME are supported: `/dev/stderr', which writes the result to + the standard error, and `/dev/stdout', which writes to the standard + output.(1) + +`e' + This command allows one to pipe input from a shell command into + pattern space. If a substitution was made, the command that is + found in pattern space is executed and pattern space is replaced + with its output. A trailing newline is suppressed; results are + undefined if the command to be executed contains a NUL character. + This is a GNU `sed' extension. + +`I' +`i' + The `I' modifier to regular-expression matching is a GNU extension + which makes `sed' match REGEXP in a case-insensitive manner. + +`M' +`m' + The `M' modifier to regular-expression matching is a GNU `sed' + extension which causes `^' and `$' to match respectively (in + addition to the normal behavior) the empty string after a newline, + and the empty string before a newline. There are special character + sequences (`\`' and `\'') which always match the beginning or the + end of the buffer. `M' stands for `multi-line'. + + + ---------- Footnotes ---------- + + (1) This is equivalent to `p' unless the `-i' option is being used. + + +File: sed.info, Node: Other Commands, Next: Programming Commands, Prev: The "s" Command, Up: sed Programs + +Less Frequently-Used Commands +============================= + + Though perhaps less frequently used than those in the previous +section, some very small yet useful `sed' scripts can be built with +these commands. + +`y/SOURCE-CHARS/DEST-CHARS/' + (The `/' characters may be uniformly replaced by any other single + character within any given `y' command.) + + Transliterate any characters in the pattern space which match any + of the SOURCE-CHARS with the corresponding character in DEST-CHARS. + + Instances of the `/' (or whatever other character is used in its + stead), `\', or newlines can appear in the SOURCE-CHARS or + DEST-CHARS lists, provide that each instance is escaped by a `\'. + The SOURCE-CHARS and DEST-CHARS lists _must_ contain the same + number of characters (after de-escaping). + +`a\' +`TEXT' + As a GNU extension, this command accepts two addresses. + + Queue the lines of text which follow this command (each but the + last ending with a `\', which are removed from the output) to be + output at the end of the current cycle, or when the next input + line is read. + + Escape sequences in TEXT are processed, so you should use `\\' in + TEXT to print a single backslash. + + As a GNU extension, if between the `a' and the newline there is + other than a whitespace-`\' sequence, then the text of this line, + starting at the first non-whitespace character after the `a', is + taken as the first line of the TEXT block. (This enables a + simplification in scripting a one-line add.) This extension also + works with the `i' and `c' commands. + +`i\' +`TEXT' + As a GNU extension, this command accepts two addresses. + + Immediately output the lines of text which follow this command + (each but the last ending with a `\', which are removed from the + output). + +`c\' +`TEXT' + Delete the lines matching the address or address-range, and output + the lines of text which follow this command (each but the last + ending with a `\', which are removed from the output) in place of + the last line (or in place of each line, if no addresses were + specified). A new cycle is started after this command is done, + since the pattern space will have been deleted. + +`=' + As a GNU extension, this command accepts two addresses. + + Print out the current input line number (with a trailing newline). + +`l N' + Print the pattern space in an unambiguous form: non-printable + characters (and the `\' character) are printed in C-style escaped + form; long lines are split, with a trailing `\' character to + indicate the split; the end of each line is marked with a `$'. + + N specifies the desired line-wrap length; a length of 0 (zero) + means to never wrap long lines. If omitted, the default as + specified on the command line is used. The N parameter is a GNU + `sed' extension. + +`r FILENAME' + As a GNU extension, this command accepts two addresses. + + Queue the contents of FILENAME to be read and inserted into the + output stream at the end of the current cycle, or when the next + input line is read. Note that if FILENAME cannot be read, it is + treated as if it were an empty file, without any error indication. + + As a GNU `sed' extension, the special value `/dev/stdin' is + supported for the file name, which reads the contents of the + standard input. + +`w FILENAME' + Write the pattern space to FILENAME. As a GNU `sed' extension, + two special values of FILE-NAME are supported: `/dev/stderr', + which writes the result to the standard error, and `/dev/stdout', + which writes to the standard output.(1) + + The file will be created (or truncated) before the first input + line is read; all `w' commands (including instances of `w' flag on + successful `s' commands) which refer to the same FILENAME are + output without closing and reopening the file. + +`D' + Delete text in the pattern space up to the first newline. If any + text is left, restart cycle with the resultant pattern space + (without reading a new line of input), otherwise start a normal + new cycle. + +`N' + Add a newline to the pattern space, then append the next line of + input to the pattern space. If there is no more input then `sed' + exits without processing any more commands. + +`P' + Print out the portion of the pattern space up to the first newline. + +`h' + Replace the contents of the hold space with the contents of the + pattern space. + +`H' + Append a newline to the contents of the hold space, and then + append the contents of the pattern space to that of the hold space. + +`g' + Replace the contents of the pattern space with the contents of the + hold space. + +`G' + Append a newline to the contents of the pattern space, and then + append the contents of the hold space to that of the pattern space. + +`x' + Exchange the contents of the hold and pattern spaces. + + + ---------- Footnotes ---------- + + (1) This is equivalent to `p' unless the `-i' option is being used. + + +File: sed.info, Node: Programming Commands, Next: Extended Commands, Prev: Other Commands, Up: sed Programs + +Commands for `sed' gurus +======================== + + In most cases, use of these commands indicates that you are probably +better off programming in something like `awk' or Perl. But +occasionally one is committed to sticking with `sed', and these +commands can enable one to write quite convoluted scripts. + +`: LABEL' + [No addresses allowed.] + + Specify the location of LABEL for branch commands. In all other + respects, a no-op. + +`b LABEL' + Unconditionally branch to LABEL. The LABEL may be omitted, in + which case the next cycle is started. + +`t LABEL' + Branch to LABEL only if there has been a successful `s'ubstitution + since the last input line was read or conditional branch was taken. + The LABEL may be omitted, in which case the next cycle is started. + + + +File: sed.info, Node: Extended Commands, Next: Escapes, Prev: Programming Commands, Up: sed Programs + +Commands Specific to GNU `sed' +============================== + + These commands are specific to GNU `sed', so you must use them with +care and only when you are sure that hindering portability is not evil. +They allow you to check for GNU `sed' extensions or to do tasks that +are required quite often, yet are unsupported by standard `sed's. + +`e [COMMAND]' + This command allows one to pipe input from a shell command into + pattern space. Without parameters, the `e' command executes the + command that is found in pattern space and replaces the pattern + space with the output; a trailing newline is suppressed. + + If a parameter is specified, instead, the `e' command interprets + it as a command and sends its output to the output stream (like + `r' does). The command can run across multiple lines, all but the + last ending with a back-slash. + + In both cases, the results are undefined if the command to be + executed contains a NUL character. + +`L N' + This GNU `sed' extension fills and joins lines in pattern space to + produce output lines of (at most) N characters, like `fmt' does; + if N is omitted, the default as specified on the command line is + used. This command is considered a failed experiment and unless + there is enough request (which seems unlikely) will be removed in + future versions. + +`Q [EXIT-CODE]' + This command only accepts a single address. + + This command is the same as `q', but will not print the contents + of pattern space. Like `q', it provides the ability to return an + exit code to the caller. + + This command can be useful because the only alternative ways to + accomplish this apparently trivial function are to use the `-n' + option (which can unnecessarily complicate your script) or + resorting to the following snippet, which wastes time by reading + the whole file without any visible effect: + + :eat + $d Quit silently on the last line + N Read another line, silently + g Overwrite pattern space each time to save memory + b eat + +`R FILENAME' + Queue a line of FILENAME to be read and inserted into the output + stream at the end of the current cycle, or when the next input + line is read. Note that if FILENAME cannot be read, or if its end + is reached, no line is appended, without any error indication. + + As with the `r' command, the special value `/dev/stdin' is + supported for the file name, which reads a line from the standard + input. + +`T LABEL' + Branch to LABEL only if there have been no successful + `s'ubstitutions since the last input line was read or conditional + branch was taken. The LABEL may be omitted, in which case the next + cycle is started. + +`v VERSION' + This command does nothing, but makes `sed' fail if GNU `sed' + extensions are not supported, simply because other versions of + `sed' do not implement it. In addition, you can specify the + version of `sed' that your script requires, such as `4.0.5'. The + default is `4.0' because that is the first version that + implemented this command. + + This command enables all GNU extensions even if `POSIXLY_CORRECT' + is set in the environment. + +`W FILENAME' + Write to the given filename the portion of the pattern space up to + the first newline. Everything said under the `w' command about + file handling holds here too. + + +File: sed.info, Node: Escapes, Prev: Extended Commands, Up: sed Programs + +GNU Extensions for Escapes in Regular Expressions +================================================= + + Until this chapter, we have only encountered escapes of the form +`\^', which tell `sed' not to interpret the circumflex as a special +character, but rather to take it literally. For example, `\*' matches +a single asterisk rather than zero or more backslashes. + + This chapter introduces another kind of escape(1)--that is, escapes +that are applied to a character or sequence of characters that +ordinarily are taken literally, and that `sed' replaces with a special +character. This provides a way of encoding non-printable characters in +patterns in a visible manner. There is no restriction on the +appearance of non-printing characters in a `sed' script but when a +script is being prepared in the shell or by text editing, it is usually +easier to use one of the following escape sequences than the binary +character it represents: + + The list of these escapes is: + +`\a' + Produces or matches a BEL character, that is an "alert" (ASCII 7). + +`\f' + Produces or matches a form feed (ASCII 12). + +`\n' + Produces or matches a newline (ASCII 10). + +`\r' + Produces or matches a carriage return (ASCII 13). + +`\t' + Produces or matches a horizontal tab (ASCII 9). + +`\v' + Produces or matches a so called "vertical tab" (ASCII 11). + +`\cX' + Produces or matches `CONTROL-X', where X is any character. The + precise effect of `\cX' is as follows: if X is a lower case + letter, it is converted to upper case. Then bit 6 of the + character (hex 40) is inverted. Thus `\cz' becomes hex 1A, but + `\c{' becomes hex 3B, while `\c;' becomes hex 7B. + +`\dXXX' + Produces or matches a character whose decimal ASCII value is XXX. + +`\oXXX' + Produces or matches a character whose octal ASCII value is XXX. + +`\xXX' + Produces or matches a character whose hexadecimal ASCII value is + XX. + + `\b' (backspace) was omitted because of the conflict with the +existing "word boundary" meaning. + + Other escapes match a particular character class and are valid only +in regular expressions: + +`\w' + Matches any "word" character. A "word" character is any letter or + digit or the underscore character. + +`\W' + Matches any "non-word" character. + +`\b' + Matches a word boundary; that is it matches if the character to + the left is a "word" character and the character to the right is a + "non-word" character, or vice-versa. + +`\B' + Matches everywhere but on a word boundary; that is it matches if + the character to the left and the character to the right are + either both "word" characters or both "non-word" characters. + +`\`' + Matches only at the start of pattern space. This is different + from `^' in multi-line mode. + +`\'' + Matches only at the end of pattern space. This is different from + `$' in multi-line mode. + + + ---------- Footnotes ---------- + + (1) All the escapes introduced here are GNU extensions, with the +exception of `\n'. In basic regular expression mode, setting +`POSIXLY_CORRECT' disables them inside bracket expressions. + + +File: sed.info, Node: Examples, Next: Limitations, Prev: sed Programs, Up: Top + +Some Sample Scripts +******************* + + Here are some `sed' scripts to guide you in the art of mastering +`sed'. + +* Menu: + +Some exotic examples: +* Centering lines:: +* Increment a number:: +* Rename files to lower case:: +* Print bash environment:: +* Reverse chars of lines:: + +Emulating standard utilities: +* tac:: Reverse lines of files +* cat -n:: Numbering lines +* cat -b:: Numbering non-blank lines +* wc -c:: Counting chars +* wc -w:: Counting words +* wc -l:: Counting lines +* head:: Printing the first lines +* tail:: Printing the last lines +* uniq:: Make duplicate lines unique +* uniq -d:: Print duplicated lines of input +* uniq -u:: Remove all duplicated lines +* cat -s:: Squeezing blank lines + + +File: sed.info, Node: Centering lines, Next: Increment a number, Up: Examples + +Centering Lines +=============== + + This script centers all lines of a file on a 80 columns width. To +change that width, the number in `\{...\}' must be replaced, and the +number of added spaces also must be changed. + + Note how the buffer commands are used to separate parts in the +regular expressions to be matched--this is a common technique. + + #!/usr/bin/sed -f + + # Put 80 spaces in the buffer + 1 { + x + s/^$/ / + s/^.*$/&&&&&&&&/ + x + } + + # del leading and trailing spaces + y/tab/ / + s/^ *// + s/ *$// + + # add a newline and 80 spaces to end of line + G + + # keep first 81 chars (80 + a newline) + s/^\(.\{81\}\).*$/\1/ + + # \2 matches half of the spaces, which are moved to the beginning + s/^\(.*\)\n\(.*\)\2/\2\1/ + + +File: sed.info, Node: Increment a number, Next: Rename files to lower case, Prev: Centering lines, Up: Examples + +Increment a Number +================== + + This script is one of a few that demonstrate how to do arithmetic in +`sed'. This is indeed possible,(1) but must be done manually. + + To increment one number you just add 1 to last digit, replacing it +by the following digit. There is one exception: when the digit is a +nine the previous digits must be also incremented until you don't have +a nine. + + This solution by Bruno Haible is very clever and smart because it +uses a single buffer; if you don't have this limitation, the algorithm +used in *Note Numbering lines: cat -n, is faster. It works by +replacing trailing nines with an underscore, then using multiple `s' +commands to increment the last digit, and then again substituting +underscores with zeros. + + #!/usr/bin/sed -f + + /[^0-9]/ d + + # replace all leading 9s by _ (any other character except digits, could + # be used) + :d + s/9\(_*\)$/_\1/ + td + + # incr last digit only. The first line adds a most-significant + # digit of 1 if we have to add a digit. + # + # The `tn' commands are not necessary, but make the thing + # faster + + s/^\(_*\)$/1\1/; tn + s/8\(_*\)$/9\1/; tn + s/7\(_*\)$/8\1/; tn + s/6\(_*\)$/7\1/; tn + s/5\(_*\)$/6\1/; tn + s/4\(_*\)$/5\1/; tn + s/3\(_*\)$/4\1/; tn + s/2\(_*\)$/3\1/; tn + s/1\(_*\)$/2\1/; tn + s/0\(_*\)$/1\1/; tn + + :n + y/_/0/ + + ---------- Footnotes ---------- + + (1) `sed' guru Greg Ubben wrote an implementation of the `dc' RPN +calculator! It is distributed together with sed. + + +File: sed.info, Node: Rename files to lower case, Next: Print bash environment, Prev: Increment a number, Up: Examples + +Rename Files to Lower Case +========================== + + This is a pretty strange use of `sed'. We transform text, and +transform it to be shell commands, then just feed them to shell. Don't +worry, even worse hacks are done when using `sed'; I have seen a script +converting the output of `date' into a `bc' program! + + The main body of this is the `sed' script, which remaps the name +from lower to upper (or vice-versa) and even checks out if the remapped +name is the same as the original name. Note how the script is +parameterized using shell variables and proper quoting. + + #! /bin/sh + # rename files to lower/upper case... + # + # usage: + # move-to-lower * + # move-to-upper * + # or + # move-to-lower -R . + # move-to-upper -R . + # + + help() + { + cat << eof + Usage: $0 [-n] [-r] [-h] files... + + -n do nothing, only see what would be done + -R recursive (use find) + -h this message + files files to remap to lower case + + Examples: + $0 -n * (see if everything is ok, then...) + $0 * + + $0 -R . + + eof + } + + apply_cmd='sh' + finder='echo "$@" | tr " " "\n"' + files_only= + + while : + do + case "$1" in + -n) apply_cmd='cat' ;; + -R) finder='find "$@" -type f';; + -h) help ; exit 1 ;; + *) break ;; + esac + shift + done + + if [ -z "$1" ]; then + echo Usage: $0 [-h] [-n] [-r] files... + exit 1 + fi + + LOWER='abcdefghijklmnopqrstuvwxyz' + UPPER='ABCDEFGHIJKLMNOPQRSTUVWXYZ' + + case `basename $0` in + *upper*) TO=$UPPER; FROM=$LOWER ;; + *) FROM=$UPPER; TO=$LOWER ;; + esac + + eval $finder | sed -n ' + + # remove all trailing slashes + s/\/*$// + + # add ./ if there is no path, only a filename + /\//! s/^/.\// + + # save path+filename + h + + # remove path + s/.*\/// + + # do conversion only on filename + y/'$FROM'/'$TO'/ + + # now line contains original path+file, while + # hold space contains the new filename + x + + # add converted file name to line, which now contains + # path/file-name\nconverted-file-name + G + + # check if converted file name is equal to original file name, + # if it is, do not print nothing + /^.*\/\(.*\)\n\1/b + + # now, transform path/fromfile\n, into + # mv path/fromfile path/tofile and print it + s/^\(.*\/\)\(.*\)\n\(.*\)$/mv "\1\2" "\1\3"/p + + ' | $apply_cmd + |