diff options
Diffstat (limited to 'src/sed/doc/sed.texi')
| -rw-r--r-- | src/sed/doc/sed.texi | 4219 |
1 files changed, 4219 insertions, 0 deletions
diff --git a/src/sed/doc/sed.texi b/src/sed/doc/sed.texi new file mode 100644 index 0000000..02d80d6 --- /dev/null +++ b/src/sed/doc/sed.texi @@ -0,0 +1,4219 @@ +\input texinfo @c -*-texinfo-*- +@c Do not edit this file!! It is automatically generated from sed-in.texi. +@c +@c -- Stuff that needs adding: ---------------------------------------------- +@c (document the `;' command-separator) +@c -------------------------------------------------------------------------- +@c Check for consistency: regexps in @code, text that they match in @samp. +@c +@c Tips: +@c @command for command +@c @samp for command fragments: @samp{cat -s} +@c @code for sed commands and flags +@c Use ``quote'' not `quote' or "quote". +@c +@c %**start of header +@setfilename sed.info +@settitle sed, a stream editor +@c %**end of header + +@c @smallbook + +@include version.texi + +@c Combine indices. +@syncodeindex ky cp +@syncodeindex pg cp +@syncodeindex tp cp + +@defcodeindex op +@syncodeindex op fn + +@include config.texi + +@copying +This file documents version @value{VERSION} of +@value{SSED}, a stream editor. + +Copyright @copyright{} 1998, 1999, 2001, 2002, 2003, 2004 Free +Software Foundation, Inc. + +This document is released under the terms of the @acronym{GNU} Free +Documentation License as published by the Free Software Foundation; +either version 1.1, or (at your option) any later version. + +You should have received a copy of the @acronym{GNU} Free Documentation +License along with @value{SSED}; see the file @file{COPYING.DOC}. +If not, write to the Free Software Foundation, 59 Temple Place - Suite +330, Boston, MA 02110-1301, USA. + +There are no Cover Texts and no Invariant Sections; this text, along +with its equivalent in the printed manual, constitutes the Title Page. +@end copying + +@setchapternewpage off + +@titlepage +@title @command{sed}, a stream editor +@subtitle version @value{VERSION}, @value{UPDATED} +@author by Ken Pizzini, Paolo Bonzini + +@page +@vskip 0pt plus 1filll +Copyright @copyright{} 1998, 1999 Free Software Foundation, Inc. + +@insertcopying + +Published by the Free Software Foundation, @* +51 Franklin Street, Fifth Floor @* +Boston, MA 02110-1301, USA +@end titlepage + + +@node Top +@top + +@ifnottex +@insertcopying +@end ifnottex + +@menu +* Introduction:: Introduction +* Invoking sed:: Invocation +* sed Programs:: @command{sed} programs +* Examples:: Some sample scripts +* Limitations:: Limitations and (non-)limitations of @value{SSED} +* Other Resources:: Other resources for learning about @command{sed} +* Reporting Bugs:: Reporting bugs + +* Extended regexps:: @command{egrep}-style regular expressions +@ifset PERL +* Perl regexps:: Perl-style regular expressions +@end ifset + +* Concept Index:: A menu with all the topics in this manual. +* Command and Option Index:: A menu with all @command{sed} commands and + command-line options. + +@detailmenu +--- The detailed node listing --- + +sed Programs: +* Execution Cycle:: How @command{sed} works +* Addresses:: Selecting lines with @command{sed} +* Regular Expressions:: Overview of regular expression syntax +* Common Commands:: Often used commands +* The "s" Command:: @command{sed}'s Swiss Army Knife +* Other Commands:: Less frequently used commands +* Programming Commands:: Commands for @command{sed} gurus +* Extended Commands:: Commands specific of @value{SSED} +* Escapes:: Specifying special characters + +Examples: +* Centering lines:: +* Increment a number:: +* Rename files to lower case:: +* Print bash environment:: +* Reverse chars of lines:: +* tac:: Reverse lines of files +* cat -n:: Numbering lines +* cat -b:: Numbering non-blank lines +* wc -c:: Counting chars +* wc -w:: Counting words +* wc -l:: Counting lines +* head:: Printing the first lines +* tail:: Printing the last lines +* uniq:: Make duplicate lines unique +* uniq -d:: Print duplicated lines of input +* uniq -u:: Remove all duplicated lines +* cat -s:: Squeezing blank lines + +@ifset PERL +Perl regexps:: Perl-style regular expressions +* Backslash:: Introduces special sequences +* Circumflex/dollar sign/period:: Behave specially with regard to new lines +* Square brackets:: Are a bit different in strange cases +* Options setting:: Toggle modifiers in the middle of a regexp +* Non-capturing subpatterns:: Are not counted when backreferencing +* Repetition:: Allows for non-greedy matching +* Backreferences:: Allows for more than 10 back references +* Assertions:: Allows for complex look ahead matches +* Non-backtracking subpatterns:: Often gives more performance +* Conditional subpatterns:: Allows if/then/else branches +* Recursive patterns:: For example to match parentheses +* Comments:: Because things can get complex... +@end ifset + +@end detailmenu +@end menu + + +@node Introduction +@chapter Introduction + +@cindex Stream editor +@command{sed} is a stream editor. +A stream editor is used to perform basic text +transformations on an input stream +(a file or input from a pipeline). +While in some ways similar to an editor which +permits scripted edits (such as @command{ed}), +@command{sed} works by making only one pass over the +input(s), and is consequently more efficient. +But it is @command{sed}'s ability to filter text in a pipeline +which particularly distinguishes it from other types of +editors. + + +@node Invoking sed +@chapter Invocation + +Normally @command{sed} is invoked like this: + +@example +sed SCRIPT INPUTFILE... +@end example + +The full format for invoking @command{sed} is: + +@example +sed OPTIONS... [SCRIPT] [INPUTFILE...] +@end example + +If you do not specify @var{INPUTFILE}, or if @var{INPUTFILE} is @file{-}, +@command{sed} filters the contents of the standard input. The @var{script} +is actually the first non-option parameter, which @command{sed} specially +considers a script and not an input file if (and only if) none of the +other @var{options} specifies a script to be executed, that is if neither +of the @option{-e} and @option{-f} options is specified. + +@command{sed} may be invoked with the following command-line options: + +@table @code +@item --version +@opindex --version +@cindex Version, printing +Print out the version of @command{sed} that is being run and a copyright notice, +then exit. + +@item --help +@opindex --help +@cindex Usage summary, printing +Print a usage message briefly summarizing these command-line options +and the bug-reporting address, +then exit. + +@item -n +@itemx --quiet +@itemx --silent +@opindex -n +@opindex --quiet +@opindex --silent +@cindex Disabling autoprint, from command line +By default, @command{sed} prints out the pattern space +at the end of each cycle through the script. +These options disable this automatic printing, +and @command{sed} only produces output when explicitly told to +via the @code{p} command. + +@item -i[@var{SUFFIX}] +@itemx --in-place[=@var{SUFFIX}] +@opindex -i +@opindex --in-place +@cindex In-place editing, activating +@cindex @value{SSEDEXT}, in-place editing +This option specifies that files are to be edited in-place. +@value{SSED} does this by creating a temporary file and +sending output to this file rather than to the standard +output.@footnote{This applies to commands such as @code{=}, +@code{a}, @code{c}, @code{i}, @code{l}, @code{p}. You can +still write to the standard output by using the @code{w} +@cindex @value{SSEDEXT}, @file{/dev/stdout} file +or @code{W} commands together with the @file{/dev/stdout} +special file}. + +This option implies @option{-s}. + +When the end of the file is reached, the temporary file is +renamed to the output file's original name. The extension, +if supplied, is used to modify the name of the old file +before renaming the temporary file, thereby making a backup +copy@footnote{Note that @value{SSED} creates the backup + file whether or not any output is actually changed.}). + +@cindex In-place editing, Perl-style backup file names +This rule is followed: if the extension doesn't contain a @code{*}, +then it is appended to the end of the current filename as a +suffix; if the extension does contain one or more @code{*} +characters, then @emph{each} asterisk is replaced with the +current filename. This allows you to add a prefix to the +backup file, instead of (or in addition to) a suffix, or +even to place backup copies of the original files into another +directory (provided the directory already exists). + +If no extension is supplied, the original file is +overwritten without making a backup. + +@item -l @var{N} +@itemx --line-length=@var{N} +@opindex -l +@opindex --line-length +@cindex Line length, setting +Specify the default line-wrap length for the @code{l} command. +A length of 0 (zero) means to never wrap long lines. If +not specified, it is taken to be 70. + +@item --posix +@cindex @value{SSEDEXT}, disabling +@value{SSED} includes several extensions to @acronym{POSIX} +sed. In order to simplify writing portable scripts, this +option disables all the extensions that this manual documents, +including additional commands. +@cindex @code{POSIXLY_CORRECT} behavior, enabling +Most of the extensions accept @command{sed} programs that +are outside the syntax mandated by @acronym{POSIX}, but some +of them (such as the behavior of the @command{N} command +described in @pxref{Reporting Bugs}) actually violate the +standard. If you want to disable only the latter kind of +extension, you can set the @code{POSIXLY_CORRECT} variable +to a non-empty value. + +@item -r +@itemx --regexp-extended +@opindex -r +@opindex --regexp-extended +@cindex Extended regular expressions, choosing +@cindex @acronym{GNU} extensions, extended regular expressions +Use extended regular expressions rather than basic +regular expressions. Extended regexps are those that +@command{egrep} accepts; they can be clearer because they +usually have less backslashes, but are a @acronym{GNU} extension +and hence scripts that use them are not portable. +@xref{Extended regexps, , Extended regular expressions}. + +@ifset PERL +@item -R +@itemx --regexp-perl +@opindex -R +@opindex --regexp-perl +@cindex Perl-style regular expressions, choosing +@cindex @value{SSEDEXT}, Perl-style regular expressions +Use Perl-style regular expressions rather than basic +regular expressions. Perl-style regexps are extremely +powerful but are a @value{SSED} extension and hence scripts that +use it are not portable. @xref{Perl regexps, , +Perl-style regular expressions}. +@end ifset + +@item -s +@itemx --separate +@cindex Working on separate files +By default, @command{sed} will consider the files specified on the +command line as a single continuous long stream. This @value{SSED} +extension allows the user to consider them as separate files: +range addresses (such as @samp{/abc/,/def/}) are not allowed +to span several files, line numbers are relative to the start +of each file, @code{$} refers to the last line of each file, +and files invoked from the @code{R} commands are rewound at the +start of each file. + +@item -u +@itemx --unbuffered +@opindex -u +@opindex --unbuffered +@cindex Unbuffered I/O, choosing +Buffer both input and output as minimally as practical. +(This is particularly useful if the input is coming from +the likes of @samp{tail -f}, and you wish to see the transformed +output as soon as possible.) + +@item -e @var{script} +@itemx --expression=@var{script} +@opindex -e +@opindex --expression +@cindex Script, from command line +Add the commands in @var{script} to the set of commands to be +run while processing the input. + +@item -f @var{script-file} +@itemx --file=@var{script-file} +@opindex -f +@opindex --file +@cindex Script, from a file +Add the commands contained in the file @var{script-file} +to the set of commands to be run while processing the input. + +@end table + +If no @option{-e}, @option{-f}, @option{--expression}, or @option{--file} +options are given on the command-line, +then the first non-option argument on the command line is +taken to be the @var{script} to be executed. + +@cindex Files to be processed as input +If any command-line parameters remain after processing the above, +these parameters are interpreted as the names of input files to +be processed. +@cindex Standard input, processing as input +A file name of @samp{-} refers to the standard input stream. +The standard input will be processed if no file names are specified. + + +@node sed Programs +@chapter @command{sed} Programs + +@cindex @command{sed} program structure +@cindex Script structure +A @command{sed} program consists of one or more @command{sed} commands, +passed in by one or more of the +@option{-e}, @option{-f}, @option{--expression}, and @option{--file} +options, or the first non-option argument if zero of these +options are used. +This document will refer to ``the'' @command{sed} script; +this is understood to mean the in-order catenation +of all of the @var{script}s and @var{script-file}s passed in. + +Each @code{sed} command consists of an optional address or +address range, followed by a one-character command name +and any additional command-specific code. + +@menu +* Execution Cycle:: How @command{sed} works +* Addresses:: Selecting lines with @command{sed} +* Regular Expressions:: Overview of regular expression syntax +* Common Commands:: Often used commands +* The "s" Command:: @command{sed}'s Swiss Army Knife +* Other Commands:: Less frequently used commands +* Programming Commands:: Commands for @command{sed} gurus +* Extended Commands:: Commands specific of @value{SSED} +* Escapes:: Specifying special characters +@end menu + + +@node Execution Cycle +@section How @command{sed} Works + +@cindex Buffer spaces, pattern and hold +@cindex Spaces, pattern and hold +@cindex Pattern space, definition +@cindex Hold space, definition +@command{sed} maintains two data buffers: the active @emph{pattern} space, +and the auxiliary @emph{hold} space. Both are initially empty. + +@command{sed} operates by performing the following cycle on each +lines of input: first, @command{sed} reads one line from the input +stream, removes any trailing newline, and places it in the pattern space. +Then commands are executed; each command can have an address associated +to it: addresses are a kind of condition code, and a command is only +executed if the condition is verified before the command is to be +executed. + +When the end of the script is reached, unless the @option{-n} option +is in use, the contents of pattern space are printed out to the output +stream, adding back the trailing newline if it was removed.@footnote{Actually, + if @command{sed} prints a line without the terminating newline, it will + nevertheless print the missing newline as soon as more text is sent to + the same output stream, which gives the ``least expected surprise'' + even though it does not make commands like @samp{sed -n p} exactly + identical to @command{cat}.} Then the next cycle starts for the next +input line. + +Unless special commands (like @samp{D}) are used, the pattern space is +deleted between two cycles. The hold space, on the other hand, keeps +its data between cycles (see commands @samp{h}, @samp{H}, @samp{x}, +@samp{g}, @samp{G} to move data between both buffers). + + +@node Addresses +@section Selecting lines with @command{sed} +@cindex Addresses, in @command{sed} scripts +@cindex Line selection +@cindex Selecting lines to process + +Addresses in a @command{sed} script can be in any of the following forms: +@table @code +@item @var{number} +@cindex Address, numeric +@cindex Line, selecting by number +Specifying a line number will match only that line in the input. +(Note that @command{sed} counts lines continuously across all input files +unless @option{-i} or @option{-s} options are specified.) + +@item @var{first}~@var{step} +@cindex @acronym{GNU} extensions, @samp{@var{n}~@var{m}} addresses +This @acronym{GNU} extension matches every @var{step}th line +starting with line @var{first}. +In particular, lines will be selected when there exists +a non-negative @var{n} such that the current line-number equals +@var{first} + (@var{n} * @var{step}). +Thus, to select the odd-numbered lines, +one would use @code{1~2}; +to pick every third line starting with the second, @samp{2~3} would be used; +to pick every fifth line starting with the tenth, use @samp{10~5}; +and @samp{50~0} is just an obscure way of saying @code{50}. + +@item $ +@cindex Address, last line +@cindex Last line, selecting +@cindex Line, selecting last +This address matches the last line of the last file of input, or +the last line of each file when the @option{-i} or @option{-s} options +are specified. + +@item /@var{regexp}/ +@cindex Address, as a regular expression +@cindex Line, selecting by regular expression match +This will select any line which matches the regular expression @var{regexp}. +If @var{regexp} itself includes any @code{/} characters, +each must be escaped by a backslash (@code{\}). + +@cindex empty regular expression +@cindex @value{SSEDEXT}, modifiers and the empty regular expression +The empty regular expression @samp{//} repeats the last regular +expression match (the same holds if the empty regular expression is +passed to the @code{s} command). Note that modifiers to regular expressions +are evaluated when the regular expression is compiled, thus it is invalid to +specify them together with the empty regular expression. + +@item \%@var{regexp}% +(The @code{%} may be replaced by any other single character.) + +@cindex Slash character, in regular expressions +This also matches the regular expression @var{regexp}, +but allows one to use a different delimiter than @code{/}. +This is particularly useful if the @var{regexp} itself contains +a lot of slashes, since it avoids the tedious escaping of every @code{/}. +If @var{regexp} itself includes any delimiter characters, +each must be escaped by a backslash (@code{\}). + +@item /@var{regexp}/I +@itemx \%@var{regexp}%I +@cindex @acronym{GNU} extensions, @code{I} modifier +@ifset PERL +@cindex Perl-style regular expressions, case-insensitive +@end ifset +The @code{I} modifier to regular-expression matching is a @acronym{GNU} +extension which causes the @var{regexp} to be matched in +a case-insensitive manner. + +@item /@var{regexp}/M +@itemx \%@var{regexp}%M +@ifset PERL +@cindex @value{SSEDEXT}, @code{M} modifier +@end ifset +@cindex Perl-style regular expressions, multiline +The @code{M} modifier to regular-expression matching is a @value{SSED} +extension which causes @code{^} and @code{$} to match respectively +(in addition to the normal behavior) the empty string after a newline, +and the empty string before a newline. There are special character +sequences +@ifset PERL +(@code{\A} and @code{\Z} in Perl mode, @code{\`} and @code{\'} +in basic or extended regular expression modes) +@end ifset +@ifclear PERL +(@code{\`} and @code{\'}) +@end ifclear +which always match the beginning or the end of the buffer. +@code{M} stands for @cite{multi-line}. + +@ifset PERL +@item /@var{regexp}/S +@itemx \%@var{regexp}%S +@cindex @value{SSEDEXT}, @code{S} modifier +@cindex Perl-style regular expressions, single line +The @code{S} modifier to regular-expression matching is only valid +in Perl mode and specifies that the dot character (@code{.}) will +match the newline character too. @code{S} stands for @cite{single-line}. +@end ifset + +@ifset PERL +@item /@var{regexp}/X +@itemx \%@var{regexp}%X +@cindex @value{SSEDEXT}, @code{X} modifier +@cindex Perl-style regular expressions, extended +The @code{X} modifier to regular-expression matching is also +valid in Perl mode only. If it is used, whitespace in the +pattern (other than in a character class) and +characters between a @kbd{#} outside a character class and the +next newline character are ignored. An escaping backslash +can be used to include a whitespace or @kbd{#} character as part +of the pattern. +@end ifset +@end table + +If no addresses are given, then all lines are matched; +if one address is given, then only lines matching that +address are matched. + +@cindex Range of lines +@cindex Several lines, selecting +An address range can be specified by specifying two addresses +separated by a comma (@code{,}). An address range matches lines +starting from where the first address matches, and continues +until the second address matches (inclusively). + +If the second address is a @var{regexp}, then checking for the +ending match will start with the line @emph{following} the +line which matched the first address: a range will always +span at least two lines (except of course if the input stream +ends). + +If the second address is a @var{number} less than (or equal to) +the line matching the first address, then only the one line is +matched. + +@cindex Special addressing forms +@cindex Range with start address of zero +@cindex Zero, as range start address +@cindex @var{addr1},+N +@cindex @var{addr1},~N +@cindex @acronym{GNU} extensions, special two-address forms +@cindex @acronym{GNU} extensions, @code{0} address +@cindex @acronym{GNU} extensions, 0,@var{addr2} addressing +@cindex @acronym{GNU} extensions, @var{addr1},+@var{N} addressing +@cindex @acronym{GNU} extensions, @var{addr1},~@var{N} addressing +@value{SSED} also supports some special two-address forms; all these +are @acronym{GNU} extensions: +@table @code +@item 0,/@var{regexp}/ +A line number of @code{0} can be used in an address specification like +@code{0,/@var{regexp}/} so that @command{sed} will try to match +@var{regexp} in the first input line too. In other words, +@code{0,/@var{regexp}/} is similar to @code{1,/@var{regexp}/}, +except that if @var{addr2} matches the very first line of input the +@code{0,/@var{regexp}/} form will consider it to end the range, whereas +the @code{1,/@var{regexp}/} form will match the beginning of its range and +hence make the range span up to the @emph{second} occurrence of the +regular expression. + +Note that this is the only place where the @code{0} address makes +sense; there is no 0-th line and commands which are given the @code{0} +address in any other way will give an error. + +@item @var{addr1},+@var{N} +Matches @var{addr1} and the @var{N} lines following @var{addr1}. + +@item @var{addr1},~@var{N} +Matches @var{addr1} and the lines following @var{addr1} +until the next line whose input line number is a multiple of @var{N}. +@end table + +@cindex Excluding lines +@cindex Selecting non-matching lines +Appending the @code{!} character to the end of an address +specification negates the sense of the match. +That is, if the @code{!} character follows an address range, +then only lines which do @emph{not} match the address range +will be selected. +This also works for singleton addresses, +and, perhaps perversely, for the null address. + + +@node Regular Expressions +@section Overview of Regular Expression Syntax + +To know how to use @command{sed}, people should understand regular +expressions (@dfn{regexp} for short). A regular expression +is a pattern that is matched against a +subject string from left to right. Most characters are +@dfn{ordinary}: they stand for +themselves in a pattern, and match the corresponding characters +in the subject. As a trivial example, the pattern + +@example + The quick brown fox +@end example + +@noindent +matches a portion of a subject string that is identical to +itself. The power of regular expressions comes from the +ability to include alternatives and repetitions in the pattern. +These are encoded in the pattern by the use of @dfn{special characters}, +which do not stand for themselves but instead +are interpreted in some special way. Here is a brief description +of regular expression syntax as used in @command{sed}. + +@table @code +@item @var{char} +A single ordinary character matches itself. + +@item * +@cindex @acronym{GNU} extensions, to basic regular expressions +Matches a sequence of zero or more instances of matches for the +preceding regular expression, which must be an ordinary character, a +special character preceded by @code{\}, a @code{.}, a grouped regexp +(see below), or a bracket expression. As a @acronym{GNU} extension, a +postfixed regular expression can also be followed by @code{*}; for +example, @code{a**} is equivalent to @code{a*}. @acronym{POSIX} +1003.1-2001 says that @code{*} stands for itself when it appears at +the start of a regular expression or subexpression, but many +non@acronym{GNU} implementations do not support this and portable +scripts should instead use @code{\*} in these contexts. + +@item \+ +@cindex @acronym{GNU} extensions, to basic regular expressions +As @code{*}, but matches one or more. It is a @acronym{GNU} extension. + +@item \? +@cindex @acronym{GNU} extensions, to basic regular expressions +As @code{*}, but only matches zero or one. It is a @acronym{GNU} extension. + +@item \@{@var{i}\@} +As @code{*}, but matches exactly @var{i} sequences (@var{i} is a +decimal integer; for portability, keep it between 0 and 255 +inclusive). + +@item \@{@var{i},@var{j}\@} +Matches between @var{i} and @var{j}, inclusive, sequences. + +@item \@{@var{i},\@} +Matches more than or equal to @var{i} sequences. + +@item \(@var{regexp}\) +Groups the inner @var{regexp} as a whole, this is used to: + +@itemize @bullet +@item +@cindex @acronym{GNU} extensions, to basic regular expressions +Apply postfix operators, like @code{\(abcd\)*}: +this will search for zero or more whole sequences +of @samp{abcd}, while @code{abcd*} would search +for @samp{abc} followed by zero or more occurrences +of @samp{d}. Note that support for @code{\(abcd\)*} is +required by @acronym{POSIX} 1003.1-2001, but many non-@acronym{GNU} +implementations do not support it and hence it is not universally +portable. + +@item +Use back references (see below). +@end itemize + +@item . +Matches any character, including newline. + +@item ^ +Matches the null string at beginning of line, i.e. what +appears after the circumflex must appear at the +beginning of line. @code{^#include} will match only +lines where @samp{#include} is the first thing on line---if +there are spaces before, for example, the match fails. +@code{^} acts as a special character only at the beginning +of the regular expression or subexpression (that is, +after @code{\(} or @code{\|}). Portable scripts should avoid +@code{^} at the beginning of a subexpression, though, as +@acronym{POSIX} allows implementations that treat @code{^} as +an ordinary character in that context. + + +@item $ +It is the same as @code{^}, but refers to end of line. +@code{$} also acts as a special character only at the end +of the regular expression or subexpression (that is, before @code{\)} +or @code{\|}), and its use at the end of a subexpression is not +portable. + + +@item [@var{list}] +@itemx [^@var{list}] +Matches any single character in @var{list}: for example, +@code{[aeiou]} matches all vowels. A list may include +sequences like @code{@var{char1}-@var{char2}}, which +matches any character between (inclusive) @var{char1} +and @var{char2}. + +A leading @code{^} reverses the meaning of @var{list}, so that +it matches any single character @emph{not} in @var{list}. To include +@code{]} in the list, make it the first character (after +the @code{^} if needed), to include @code{-} in the list, +make it the first or last; to include @code{^} put +it after the first character. + +@cindex @code{POSIXLY_CORRECT} behavior, bracket expressions +The characters @code{$}, @code{*}, @code{.}, @code{[}, and @code{\} +are normally not special within @var{list}. For example, @code{[\*]} +matches either @samp{\} or @samp{*}, because the @code{\} is not +special here. However, strings like @code{[.ch.]}, @code{[=a=]}, and +@code{[:space:]} are special within @var{list} and represent collating +symbols, equivalence classes, and character classes, respectively, and +@code{[} is therefore special within @var{list} when it is followed by +@code{.}, @code{=}, or @code{:}. Also, when not in +@env{POSIXLY_CORRECT} mode, special escapes like @code{\n} and +@code{\t} are recognized within @var{list}. @xref{Escapes}. + +@item @var{regexp1}\|@var{regexp2} +@cindex @acronym{GNU} extensions, to basic regular expressions +Matches either @var{regexp1} or @var{regexp2}. Use +parentheses to use complex alternative regular expressions. +The matching process tries each alternative in turn, from +left to right, and the first one that succeeds is used. +It is a @acronym{GNU} extension. + +@item @var{regexp1}@var{regexp2} +Matches the concatenation of @var{regexp1} and @var{regexp2}. +Concatenation binds more tightly than @code{\|}, @code{^}, and +@code{$}, but less tightly than the other regular expression +operators. + +@item \@var{digit} +Matches the @var{digit}-th @code{\(@dots{}\)} parenthesized +subexpression in the regular expression. This is called a @dfn{back +reference}. Subexpressions are implicity numbered by counting +occurrences of @code{\(} left-to-right. + +@item \n +Matches the newline character. + +@item \@var{char} +Matches @var{char}, where @var{char} is one of @code{$}, +@code{*}, @code{.}, @code{[}, @code{\}, or @code{^}. +Note that the only C-like +backslash sequences that you can portably assume to be +interpreted are @code{\n} and @code{\\}; in particular +@code{\t} is not portable, and matches a @samp{t} under most +implementations of @command{sed}, rather than a tab character. + +@end table + +@cindex Greedy regular expression matching +Note that the regular expression matcher is greedy, i.e., matches +are attempted from left to right and, if two or more matches are +possible starting at the same character, it selects the longest. + +@noindent +Examples: +@table @samp +@item abcdef +Matches @samp{abcdef}. + +@item a*b +Matches zero or more @samp{a}s followed by a single +@samp{b}. For example, @samp{b} or @samp{aaaaab}. + +@item a\?b +Matches @samp{b} or @samp{ab}. + +@item a\+b\+ +Matches one or more @samp{a}s followed by one or more +@samp{b}s: @samp{ab} is the shortest possible match, but +other examples are @samp{aaaab} or @samp{abbbbb} or +@samp{aaaaaabbbbbbb}. + +@item .* +@itemx .\+ +These two both match all the characters in a string; +however, the first matches every string (including the empty +string), while the second matches only strings containing +at least one character. + +@item ^main.*(.*) +his matches a string starting with @samp{main}, +followed by an opening and closing +parenthesis. The @samp{n}, @samp{(} and @samp{)} need not +be adjacent. + +@item ^# +This matches a string beginning with @samp{#}. + +@item \\$ +This matches a string ending with a single backslash. The +regexp contains two backslashes for escaping. + +@item \$ +Instead, this matches a string consisting of a single dollar sign, +because it is escaped. + +@item [a-zA-Z0-9] +In the C locale, this matches any @acronym{ASCII} letters or digits. + +@item [^ @kbd{tab}]\+ +(Here @kbd{tab} stands for a single tab character.) +This matches a string of one or more +characters, none of which is a space or a tab. +Usually this means a word. + +@item ^\(.*\)\n\1$ +This matches a string consisting of two equal substrings separated by +a newline. + +@item .\@{9\@}A$ +This matches nine characters followed by an @samp{A}. + +@item ^.\@{15\@}A +This matches the start of a string that contains 16 characters, +the last of which is an @samp{A}. + +@end table + + + +@node Common Commands +@section Often-Used Commands + +If you use @command{sed} at all, you will quite likely want to know +these commands. + +@table @code +@item # +[No addresses allowed.] + +@findex # (comments) +@cindex Comments, in scripts +The @code{#} character begins a comment; +the comment continues until the next newline. + +@cindex Portability, comments +If you are concerned about portability, be aware that +some implementations of @command{sed} (which are not @sc{posix} +conformant) may only support a single one-line comment, +and then only when the very first character of the script is a @code{#}. + +@findex -n, forcing from within a script +@cindex Caveat --- #n on first line +Warning: if the first two characters of the @command{sed} script +are @code{#n}, then the @option{-n} (no-autoprint) option is forced. +If you want to put a comment in the first line of your script +and that comment begins with the letter @samp{n} +and you do not want this behavior, +then be sure to either use a capital @samp{N}, +or place at least one space before the @samp{n}. + +@item q [@var{exit-code}] +This command only accepts a single address. + +@findex q (quit) command +@cindex @value{SSEDEXT}, returning an exit code +@cindex Quitting +Exit @command{sed} without processing any more commands or input. +Note that the current pattern space is printed if auto-print is +not disabled with the @option{-n} options. The ability to return +an exit code from the @command{sed} script is a @value{SSED} extension. + +@item d +@findex d (delete) command +@cindex Text, deleting +Delete the pattern space; +immediately start next cycle. + +@item p +@findex p (print) command +@cindex Text, printing +Print out the pattern space (to the standard output). +This command is usually only used in conjunction with the @option{-n} +command-line option. + +@item n +@findex n (next-line) command +@cindex Next input line, replace pattern space with +@cindex Read next input line +If auto-print is not disabled, print the pattern space, +then, regardless, replace the pattern space with the next line of input. +If there is no more input then @command{sed} exits without processing +any more commands. + +@item @{ @var{commands} @} +@findex @{@} command grouping +@cindex Grouping commands +@cindex Command groups +A group of commands may be enclosed between +@code{@{} and @code{@}} characters. +This is particularly useful when you want a group of commands +to be triggered by a single address (or address-range) match. + +@end table + +@node The "s" Command +@section The @code{s} Command + +The syntax of the @code{s} (as in substitute) command is +@samp{s/@var{regexp}/@var{replacement}/@var{flags}}. The @code{/} +characters may be uniformly replaced by any other single +character within any given @code{s} command. The @code{/} +character (or whatever other character is used in its stead) +can appear in the @var{regexp} or @var{replacement} +only if it is preceded by a @code{\} character. + +The @code{s} command is probably the most important in @command{sed} +and has a lot of different options. Its basic concept is simple: +the @code{s} command attempts to match the pattern +space against the supplied @var{regexp}; if the match is +successful, then that portion of the pattern +space which was matched is replaced with @var{replacement}. + +@cindex Backreferences, in regular expressions +@cindex Parenthesized substrings +The @var{replacement} can contain @code{\@var{n}} (@var{n} being +a number from 1 to 9, inclusive) references, which refer to +the portion of the match which is contained between the @var{n}th +@code{\(} and its matching @code{\)}. +Also, the @var{replacement} can contain unescaped @code{&} +characters which reference the whole matched portion +of the pattern space. +@cindex @value{SSEDEXT}, case modifiers in @code{s} commands +Finally, as a @value{SSED} extension, you can include a +special sequence made of a backslash and one of the letters +@code{L}, @code{l}, @code{U}, @code{u}, or @code{E}. +The meaning is as follows: + +@table @code +@item \L +Turn the replacement +to lowercase until a @code{\U} or @code{\E} is found, + +@item \l +Turn the +next character to lowercase, + +@item \U +Turn the replacement to uppercase +until a @code{\L} or @code{\E} is found, + +@item \u +Turn the next character +to uppercase, + +@item \E +Stop case conversion started by @code{\L} or @code{\U}. +@end table + +To include a literal @code{\}, @code{&}, or newline in the final +replacement, be sure to precede the desired @code{\}, @code{&}, +or newline in the @var{replacement} with a @code{\}. + +@findex s command, option flags +@cindex Substitution of text, options +The @code{s} command can be followed by zero or more of the +following @var{flags}: + +@table @code +@item g +@cindex Global substitution +@cindex Replacing all text matching regexp in a line +Apply the replacement to @emph{all} matches to the @var{regexp}, +not just the first. + +@item @var{number} +@cindex Replacing only @var{n}th match of regexp in a line +Only replace the @var{number}th match of the @var{regexp}. + +@cindex @acronym{GNU} extensions, @code{g} and @var{number} modifier interaction in @code{s} command +@cindex Mixing @code{g} and @var{number} modifiers in the @code{s} command +Note: the @sc{posix} standard does not specify what should happen +when you mix the @code{g} and @var{number} modifiers, +and currently there is no widely agreed upon meaning +across @command{sed} implementations. +For @value{SSED}, the interaction is defined to be: +ignore matches before the @var{number}th, +and then match and replace all matches from +the @var{number}th on. + +@item p +@cindex Text, printing after substitution +If the substitution was made, then print the new pattern space. + +Note: when both the @code{p} and @code{e} options are specified, +the relative ordering of the two produces very different results. +In general, @code{ep} (evaluate then print) is what you want, +but operating the other way round can be useful for debugging. +For this reason, the current version of @value{SSED} interprets +specially the presence of @code{p} options both before and after +@code{e}, printing the pattern space before and after evaluation, +while in general flags for the @code{s} command show their +effect just once. This behavior, although documented, might +change in future versions. + +@item w @var{file-name} +@cindex Text, writing to a file after substitution +@cindex @value{SSEDEXT}, @file{/dev/stdout} file +@cindex @value{SSEDEXT}, @file{/dev/stderr} file +If the substitution was made, then write out the result to the named file. +As a @value{SSED} extension, two special values of @var{file-name} are +supported: @file{/dev/stderr}, which writes the result to the standard +error, and @file{/dev/stdout}, which writes to the standard +output.@footnote{This is equivalent to @code{p} unless the @option{-i} +option is being used.} + +@item e +@cindex Evaluate Bourne-shell commands, after substitution +@cindex Subprocesses +@cindex @value{SSEDEXT}, evaluating Bourne-shell commands +@cindex @value{SSEDEXT}, subprocesses +This command allows one to pipe input from a shell command +into pattern space. If a substitution was made, the command +that is found in pattern space is executed and pattern space +is replaced with its output. A trailing newline is suppressed; +results are undefined if the command to be executed contains +a @sc{nul} character. This is a @value{SSED} extension. + +@item I +@itemx i +@cindex @acronym{GNU} extensions, @code{I} modifier +@cindex Case-insensitive matching +@ifset PERL +@cindex Perl-style regular expressions, case-insensitive +@end ifset +The @code{I} modifier to regular-expression matching is a @acronym{GNU} +extension which makes @command{sed} match @var{regexp} in a +case-insensitive manner. + +@item M +@itemx m +@cindex @value{SSEDEXT}, @code{M} modifier +@ifset PERL +@cindex Perl-style regular expressions, multiline +@end ifset +The @code{M} modifier to regular-expression matching is a @value{SSED} +extension which causes @code{^} and @code{$} to match respectively +(in addition to the normal behavior) the empty string after a newline, +and the empty string before a newline. There are special character +sequences +@ifset PERL +(@code{\A} and @code{\Z} in Perl mode, @code{\`} and @code{\'} +in basic or extended regular expression modes) +@end ifset +@ifclear PERL +(@code{\`} and @code{\'}) +@end ifclear +which always match the beginning or the end of the buffer. +@code{M} stands for @cite{multi-line}. + +@ifset PERL +@item S +@itemx s +@cindex @value{SSEDEXT}, @code{S} modifier +@cindex Perl-style regular expressions, single line +The @code{S} modifier to regular-expression matching is only valid +in Perl mode and specifies that the dot character (@code{.}) will +match the newline character too. @code{S} stands for @cite{single-line}. +@end ifset + +@ifset PERL +@item X +@itemx x +@cindex @value{SSEDEXT}, @code{X} modifier +@cindex Perl-style regular expressions, extended +The @code{X} modifier to regular-expression matching is also +valid in Perl mode only. If it is used, whitespace in the +pattern (other than in a character class) and +characters between a @kbd{#} outside a character class and the +next newline character are ignored. An escaping backslash +can be used to include a whitespace or @kbd{#} character as part +of the pattern. +@end ifset +@end table + + +@node Other Commands +@section Less Frequently-Used Commands + +Though perhaps less frequently used than those in the previous +section, some very small yet useful @command{sed} scripts can be built with +these commands. + +@table @code +@item y/@var{source-chars}/@var{dest-chars}/ +(The @code{/} characters may be uniformly replaced by +any other single character within any given @code{y} command.) + +@findex y (transliterate) command +@cindex Transliteration +Transliterate any characters in the pattern space which match +any of the @var{source-chars} with the corresponding character +in @var{dest-chars}. + +Instances of the @code{/} (or whatever other character is used in its stead), +@code{\}, or newlines can appear in the @var{source-chars} or @var{dest-chars} +lists, provide that each instance is escaped by a @code{\}. +The @var{source-chars} and @var{dest-chars} lists @emph{must} +contain the same number of characters (after de-escaping). + +@item a\ +@itemx @var{text} +@cindex @value{SSEDEXT}, two addresses supported by most commands +As a @acronym{GNU} extension, this command accepts two addresses. + +@findex a (append text lines) command +@cindex Appending text after a line +@cindex Text, appending +Queue the lines of text which follow this command +(each but the last ending with a @code{\}, +which are removed from the output) +to be output at the end of the current cycle, +or when the next input line is read. + +Escape sequences in @var{text} are processed, so you should +use @code{\\} in @var{text} to print a single backslash. + +As a @acronym{GNU} extension, if between the @code{a} and the newline there is +other than a whitespace-@code{\} sequence, then the text of this line, +starting at the first non-whitespace character after the @code{a}, +is taken as the first line of the @var{text} block. +(This enables a simplification in scripting a one-line add.) +This extension also works with the @code{i} and @code{c} commands. + +@item i\ +@itemx @var{text} +@cindex @value{SSEDEXT}, two addresses supported by most commands +As a @acronym{GNU} extension, this command accepts two addresses. + +@findex i (insert text lines) command +@cindex Inserting text before a line +@cindex Text, insertion +Immediately output the lines of text which follow this command +(each but the last ending with a @code{\}, +which are removed from the output). + +@item c\ +@itemx @var{text} +@findex c (change to text lines) command +@cindex Replacing selected lines with other text +Delete the lines matching the address or address-range, +and output the lines of text which follow this command +(each but the last ending with a @code{\}, +which are removed from the output) +in place of the last line +(or in place of each line, if no addresses were specified). +A new cycle is started after this command is done, +since the pattern space will have been deleted. + +@item = +@cindex @value{SSEDEXT}, two addresses supported by most commands +As a @acronym{GNU} extension, this command accepts two addresses. + +@findex = (print line number) command +@cindex Printing line number +@cindex Line number, printing +Print out the current input line number (with a trailing newline). + +@item l @var{n} +@findex l (list unambiguously) command +@cindex List pattern space +@cindex Printing text unambiguously +@cindex Line length, setting +@cindex @value{SSEDEXT}, setting line length +Print the pattern space in an unambiguous form: +non-printable characters (and the @code{\} character) +are printed in C-style escaped form; long lines are split, +with a trailing @code{\} character to indicate the split; +the end of each line is marked with a @code{$}. + +@var{n} specifies the desired line-wrap length; +a length of 0 (zero) means to never wrap long lines. If omitted, +the default as specified on the command line is used. The @var{n} +parameter is a @value{SSED} extension. + +@item r @var{filename} +@cindex @value{SSEDEXT}, two addresses supported by most commands +As a @acronym{GNU} extension, this command accepts two addresses. + +@findex r (read file) command +@cindex Read text from a file +@cindex @value{SSEDEXT}, @file{/dev/stdin} file +Queue the contents of @var{filename} to be read and +inserted into the output stream at the end of the current cycle, +or when the next input line is read. +Note that if @var{filename} cannot be read, it is treated as +if it were an empty file, without any error indication. + +As a @value{SSED} extension, the special value @file{/dev/stdin} +is supported for the file name, which reads the contents of the +standard input. + +@item w @var{filename} +@findex w (write file) command +@cindex Write to a file +@cindex @value{SSEDEXT}, @file{/dev/stdout} file +@cindex @value{SSEDEXT}, @file{/dev/stderr} file +Write the pattern space to @var{filename}. +As a @value{SSED} extension, two special values of @var{file-name} are +supported: @file{/dev/stderr}, which writes the result to the standard +error, and @file{/dev/stdout}, which writes to the standard +output.@footnote{This is equivalent to @code{p} unless the @option{-i} +option is being used.} + +The file will be created (or truncated) before the +first input line is read; all @code{w} commands +(including instances of @code{w} flag on successful @code{s} commands) +which refer to the same @var{filename} are output without +closing and reopening the file. + +@item D +@findex D (delete first line) command +@cindex Delete first line from pattern space +Delete text in the pattern space up to the first newline. +If any text is left, restart cycle with the resultant +pattern space (without reading a new line of input), +otherwise start a normal new cycle. + +@item N +@findex N (append Next line) command +@cindex Next input line, append to pattern space +@cindex Append next input line to pattern space +Add a newline to the pattern space, +then append the next line of input to the pattern space. +If there is no more input then @command{sed} exits without processing +any more commands. + +@item P +@findex P (print first line) command +@cindex Print first line from pattern space +Print out the portion of the pattern space up to the first newline. + +@item h +@findex h (hold) command +@cindex Copy pattern space into hold space +@cindex Replace hold space with copy of pattern space +@cindex Hold space, copying pattern space into +Replace the contents of the hold space with the contents of the pattern space. + +@item H +@findex H (append Hold) command +@cindex Append pattern space to hold space +@cindex Hold space, appending from pattern space +Append a newline to the contents of the hold space, +and then append the contents of the pattern space to that of the hold space. + +@item g +@findex g (get) command +@cindex Copy hold space into pattern space +@cindex Replace pattern space with copy of hold space +@cindex Hold space, copy into pattern space +Replace the contents of the pattern space with the contents of the hold space. + +@item G +@findex G (appending Get) command +@cindex Append hold space to pattern space +@cindex Hold space, appending to pattern space +Append a newline to the contents of the pattern space, +and then append the contents of the hold space to that of the pattern space. + +@item x +@findex x (eXchange) command +@cindex Exchange hold space with pattern space +@cindex Hold space, exchange with pattern space +Exchange the contents of the hold and pattern spaces. + +@end table + + +@node Programming Commands +@section Commands for @command{sed} gurus + +In most cases, use of these commands indicates that you are +probably better off programming in something like @command{awk} +or Perl. But occasionally one is committed to sticking +with @command{sed}, and these commands can enable one to write +quite convoluted scripts. + +@cindex Flow of control in scripts +@table @code +@item : @var{label} +[No addresses allowed.] + +@findex : (label) command +@cindex Labels, in scripts +Specify the location of @var{label} for branch commands. +In all other respects, a no-op. + +@item b @var{label} +@findex b (branch) command +@cindex Branch to a label, unconditionally +@cindex Goto, in scripts +Unconditionally branch to @var{label}. +The @var{label} may be omitted, in which case the next cycle is started. + +@item t @var{label} +@findex t (test and branch if successful) command +@cindex Branch to a label, if @code{s///} succeeded +@cindex Conditional branch +Branch to @var{label} only if there has been a successful @code{s}ubstitution +since the last input line was read or conditional branch was taken. +The @var{label} may be omitted, in which case the next cycle is started. + +@end table + +@node Extended Commands +@section Commands Specific to @value{SSED} + +These commands are specific to @value{SSED}, so you +must use them with care and only when you are sure that +hindering portability is not evil. They allow you to check +for @value{SSED} extensions or to do tasks that are required +quite often, yet are unsupported by standard @command{sed}s. + +@table @code +@item e [@var{command}] +@findex e (evaluate) command +@cindex Evaluate Bourne-shell commands +@cindex Subprocesses +@cindex @value{SSEDEXT}, evaluating Bourne-shell commands +@cindex @value{SSEDEXT}, subprocesses +This command allows one to pipe input from a shell command +into pattern space. Without parameters, the @code{e} command +executes the command that is found in pattern space and +replaces the pattern space with the output; a trailing newline +is suppressed. + +If a parameter is specified, instead, the @code{e} command +interprets it as a command and sends its output to the output stream +(like @code{r} does). The command can run across multiple +lines, all but the last ending with a back-slash. + +In both cases, the results are undefined if the command to be +executed contains a @sc{nul} character. + +@item L @var{n} +@findex L (fLow paragraphs) command +@cindex Reformat pattern space +@cindex Reformatting paragraphs +@cindex @value{SSEDEXT}, reformatting paragraphs +@cindex @value{SSEDEXT}, @code{L} command +This @value{SSED} extension fills and joins lines in pattern space +to produce output lines of (at most) @var{n} characters, like +@code{fmt} does; if @var{n} is omitted, the default as specified +on the command line is used. This command is considered a failed +experiment and unless there is enough request (which seems unlikely) +will be removed in future versions. + +@ignore +Blank lines, spaces between words, and indentation are +preserved in the output; successive input lines with different +indentation are not joined; tabs are expanded to 8 columns. + +If the pattern space contains multiple lines, they are joined, but +since the pattern space usually contains a single line, the behavior +of a simple @code{L;d} script is the same as @samp{fmt -s} (i.e., +it does not join short lines to form longer ones). + +@var{n} specifies the desired line-wrap length; if omitted, +the default as specified on the command line is used. +@end ignore + +@item Q [@var{exit-code}] +This command only accepts a single address. + +@findex Q (silent Quit) command +@cindex @value{SSEDEXT}, quitting silently +@cindex @value{SSEDEXT}, returning an exit code +@cindex Quitting +This command is the same as @code{q}, but will not print the +contents of pattern space. Like @code{q}, it provides the +ability to return an exit code to the caller. + +This command can be useful because the only alternative ways +to accomplish this apparently trivial function are to use +the @option{-n} option (which can unnecessarily complicate +your script) or resorting to the following snippet, which +wastes time by reading the whole file without any visible effect: + +@example +:eat +$d @i{Quit silently on the last line} +N @i{Read another line, silently} +g @i{Overwrite pattern space each time to save memory} +b eat +@end example + +@item R @var{filename} +@findex R (read line) command +@cindex Read text from a file +@cindex @value{SSEDEXT}, reading a file a line at a time +@cindex @value{SSEDEXT}, @code{R} command +@cindex @value{SSEDEXT}, @file{/dev/stdin} file +Queue a line of @var{filename} to be read and +inserted into the output stream at the end of the current cycle, +or when the next input line is read. +Note that if @var{filename} cannot be read, or if its end is +reached, no line is appended, without any error indication. + +As with the @code{r} command, the special value @file{/dev/stdin} +is supported for the file name, which reads a line from the +standard input. + +@item T @var{label} +@findex T (test and branch if failed) command +@cindex @value{SSEDEXT}, branch if @code{s///} failed +@cindex Branch to a label, if @code{s///} failed +@cindex Conditional branch +Branch to @var{label} only if there have been no successful +@code{s}ubstitutions since the last input line was read or +conditional branch was taken. The @var{label} may be omitted, +in which case the next cycle is started. + +@item v @var{version} +@findex v (version) command +@cindex @value{SSEDEXT}, checking for their presence +@cindex Requiring @value{SSED} +This command does nothing, but makes @command{sed} fail if +@value{SSED} extensions are not supported, simply because other +versions of @command{sed} do not implement it. In addition, you +can specify the version of @command{sed} that your script +requires, such as @code{4.0.5}. The default is @code{4.0} +because that is the first version that implemented this command. + +This command enables all @value{SSEDEXT} even if +@env{POSIXLY_CORRECT} is set in the environment. + +@item W @var{filename} +@findex W (write first line) command +@cindex Write first line to a file +@cindex @value{SSEDEXT}, writing first line to a file +Write to the given filename the portion of the pattern space up to +the first newline. Everything said under the @code{w} command about +file handling holds here too. +@end table + +@node Escapes +@section @acronym{GNU} Extensions for Escapes in Regular Expressions + +@cindex @acronym{GNU} extensions, special escapes +Until this chapter, we have only encountered escapes of the form +@samp{\^}, which tell @command{sed} not to interpret the circumflex +as a special character, but rather to take it literally. For +example, @samp{\*} matches a single asterisk rather than zero +or more backslashes. + +@cindex @code{POSIXLY_CORRECT} behavior, escapes +This chapter introduces another kind of escape@footnote{All +the escapes introduced here are @acronym{GNU} +extensions, with the exception of @code{\n}. In basic regular +expression mode, setting @code{POSIXLY_CORRECT} disables them inside +bracket expressions.}---that +is, escapes that are applied to a character or sequence of characters +that ordinarily are taken literally, and that @command{sed} replaces +with a special character. This provides a way +of encoding non-printable characters in patterns in a visible manner. +There is no restriction on the appearance of non-printing characters +in a @command{sed} script but when a script is being prepared in the +shell or by text editing, it is usually easier to use one of +the following escape sequences than the binary character it +represents: + +The list of these escapes is: + +@table @code +@item \a +Produces or matches a @sc{bel} character, that is an ``alert'' (@sc{ascii} 7). + +@item \f +Produces or matches a form feed (@sc{ascii} 12). + +@item \n +Produces or matches a newline (@sc{ascii} 10). + +@item \r +Produces or matches a carriage return (@sc{ascii} 13). + +@item \t +Produces or matches a horizontal tab (@sc{ascii} 9). + +@item \v +Produces or matches a so called ``vertical tab'' (@sc{ascii} 11). + +@item \c@var{x} +Produces or matches @kbd{@sc{Control}-@var{x}}, where @var{x} is +any character. The precise effect of @samp{\c@var{x}} is as follows: +if @var{x} is a lower case letter, it is converted to upper case. +Then bit 6 of the character (hex 40) is inverted. Thus @samp{\cz} becomes +hex 1A, but @samp{\c@{} becomes hex 3B, while @samp{\c;} becomes hex 7B. + +@item \d@var{xxx} +Produces or matches a character whose decimal @sc{ascii} value is @var{xxx}. + +@item \o@var{xxx} +@ifset PERL +@item \@var{xxx} +@end ifset +Produces or matches a character whose octal @sc{ascii} value is @var{xxx}. +@ifset PERL +The syntax without the @code{o} is active in Perl mode, while the one +with the @code{o} is active in the normal or extended @sc{posix} regular +expression modes. +@end ifset + +@item \x@var{xx} +Produces or matches a character whose hexadecimal @sc{ascii} value is @var{xx}. +@end table + +@samp{\b} (backspace) was omitted because of the conflict with +the existing ``word boundary'' meaning. + +Other escapes match a particular character class and are valid only in +regular expressions: + +@table @code +@item \w +Matches any ``word'' character. A ``word'' character is any +letter or digit or the underscore character. + +@item \W +Matches any ``non-word'' character. + +@item \b +Matches a word boundary; that is it matches if the character +to the left is a ``word'' character and the character to the +right is a ``non-word'' character, or vice-versa. + +@item \B +Matches everywhere but on a word boundary; that is it matches +if the character to the left and the character to the right +are either both ``word'' characters or both ``non-word'' +characters. + +@item \` +Matches only at the start of pattern space. This is different +from @code{^} in multi-line mode. + +@item \' +Matches only at the end of pattern space. This is different +from @code{$} in multi-line mode. + +@ifset PERL +@item \G +Match only at the start of pattern space or, when doing a global +substitution using the @code{s///g} command and option, at +the end-of-match position of the prior match. For example, +@samp{s/\Ga/Z/g} will change an initial run of @code{a}s to +a run of @code{Z}s +@end ifset +@end table + +@node Examples +@chapter Some Sample Scripts + +Here are some @command{sed} scripts to guide you in the art of mastering +@command{sed}. + +@menu +Some exotic examples: +* Centering lines:: +* Increment a number:: +* Rename files to lower case:: +* Print bash environment:: +* Reverse chars of lines:: + +Emulating standard utilities: +* tac:: Reverse lines of files +* cat -n:: Numbering lines +* cat -b:: Numbering non-blank lines +* wc -c:: Counting chars +* wc -w:: Counting words +* wc -l:: Counting lines +* head:: Printing the first lines +* tail:: Printing the last lines +* uniq:: Make duplicate lines unique +* uniq -d:: Print duplicated lines of input +* uniq -u:: Remove all duplicated lines +* cat -s:: Squeezing blank lines +@end menu + +@node Centering lines +@section Centering Lines + +This script centers all lines of a file on a 80 columns width. +To change that width, the number in @code{\@{@dots{}\@}} must be +replaced, and the number of added spaces also must be changed. + +Note how the buffer commands are used to separate parts in +the regular expressions to be matched---this is a common +technique. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +@group +# Put 80 spaces in the buffer +1 @{ + x + s/^$/ / + s/^.*$/&&&&&&&&/ + x +@} +@end group + +@group +# del leading and trailing spaces +y/@kbd{tab}/ / +s/^ *// +s/ *$// +@end group + +@group +# add a newline and 80 spaces to end of line +G +@end group + +@group +# keep first 81 chars (80 + a newline) +s/^\(.\@{81\@}\).*$/\1/ +@end group + +@group +# \2 matches half of the spaces, which are moved to the beginning +s/^\(.*\)\n\(.*\)\2/\2\1/ +@end group +@end example +@c end--------------------------------------------- + +@node Increment a number +@section Increment a Number + +This script is one of a few that demonstrate how to do arithmetic +in @command{sed}. This is indeed possible,@footnote{@command{sed} guru Greg +Ubben wrote an implementation of the @command{dc} @sc{rpn} calculator! +It is distributed together with sed.} but must be done manually. + +To increment one number you just add 1 to last digit, replacing +it by the following digit. There is one exception: when the digit +is a nine the previous digits must be also incremented until you +don't have a nine. + +This solution by Bruno Haible is very clever and smart because +it uses a single buffer; if you don't have this limitation, the +algorithm used in @ref{cat -n, Numbering lines}, is faster. +It works by replacing trailing nines with an underscore, then +using multiple @code{s} commands to increment the last digit, +and then again substituting underscores with zeros. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +/[^0-9]/ d + +@group +# replace all leading 9s by _ (any other character except digits, could +# be used) +:d +s/9\(_*\)$/_\1/ +td +@end group + +@group +# incr last digit only. The first line adds a most-significant +# digit of 1 if we have to add a digit. +# +# The @code{tn} commands are not necessary, but make the thing +# faster +@end group + +@group +s/^\(_*\)$/1\1/; tn +s/8\(_*\)$/9\1/; tn +s/7\(_*\)$/8\1/; tn +s/6\(_*\)$/7\1/; tn +s/5\(_*\)$/6\1/; tn +s/4\(_*\)$/5\1/; tn +s/3\(_*\)$/4\1/; tn +s/2\(_*\)$/3\1/; tn +s/1\(_*\)$/2\1/; tn +s/0\(_*\)$/1\1/; tn +@end group + +@group +:n +y/_/0/ +@end group +@end example +@c end--------------------------------------------- + +@node Rename files to lower case +@section Rename Files to Lower Case + +This is a pretty strange use of @command{sed}. We transform text, and +transform it to be shell commands, then just feed them to shell. +Don't worry, even worse hacks are done when using @command{sed}; I have +seen a script converting the output of @command{date} into a @command{bc} +program! + +The main body of this is the @command{sed} script, which remaps the name +from lower to upper (or vice-versa) and even checks out +if the remapped name is the same as the original name. +Note how the script is parameterized using shell +variables and proper quoting. + +@c start------------------------------------------- +@example +@group +#! /bin/sh +# rename files to lower/upper case... +# +# usage: +# move-to-lower * +# move-to-upper * +# or +# move-to-lower -R . +# move-to-upper -R . +# +@end group + +@group +help() +@{ + cat << eof +Usage: $0 [-n] [-r] [-h] files... +@end group + +@group +-n do nothing, only see what would be done +-R recursive (use find) +-h this message +files files to remap to lower case +@end group + +@group +Examples: + $0 -n * (see if everything is ok, then...) + $0 * +@end group + + $0 -R . + +@group +eof +@} +@end group + +@group +apply_cmd='sh' +finder='echo "$@@" | tr " " "\n"' +files_only= +@end group + +@group +while : +do + case "$1" in + -n) apply_cmd='cat' ;; + -R) finder='find "$@@" -type f';; + -h) help ; exit 1 ;; + *) break ;; + esac + shift +done +@end group + +@group +if [ -z "$1" ]; then + echo Usage: $0 [-h] [-n] [-r] files... + exit 1 +fi +@end group + +@group +LOWER='abcdefghijklmnopqrstuvwxyz' +UPPER='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +@end group + +@group +case `basename $0` in + *upper*) TO=$UPPER; FROM=$LOWER ;; + *) FROM=$UPPER; TO=$LOWER ;; +esac +@end group + +eval $finder | sed -n ' + +@group +# remove all trailing slashes +s/\/*$// +@end group + +@group +# add ./ if there is no path, only a filename +/\//! s/^/.\// +@end group + +@group +# save path+filename +h +@end group + +@group +# remove path +s/.*\/// +@end group + +@group +# do conversion only on filename +y/'$FROM'/'$TO'/ +@end group + +@group +# now line contains original path+file, while +# hold space contains the new filename +x +@end group + +@group +# add converted file name to line, which now contains +# path/file-name\nconverted-file-name +G +@end group + +@group +# check if converted file name is equal to original file name, +# if it is, do not print nothing +/^.*\/\(.*\)\n\1/b +@end group + +@group +# now, transform path/fromfile\n, into +# mv path/fromfile path/tofile and print it +s/^\(.*\/\)\(.*\)\n\(.*\)$/mv "\1\2" "\1\3"/p +@end group + +' | $apply_cmd +@end example +@c end--------------------------------------------- + +@node Print bash environment +@section Print @command{bash} Environment + +This script strips the definition of the shell functions +from the output of the @command{set} Bourne-shell command. + +@c start------------------------------------------- +@example +#!/bin/sh + +@group +set | sed -n ' +:x +@end group + +@group +@ifinfo +# if no occurrence of "=()" print and load next line +@end ifinfo +@ifnotinfo +# if no occurrence of @samp{=()} print and load next line +@end ifnotinfo +/=()/! @{ p; b; @} +/ () $/! @{ p; b; @} +@end group + +@group +# possible start of functions section +# save the line in case this is a var like FOO="() " +h +@end group + +@group +# if the next line has a brace, we quit because +# nothing comes after functions +n +/^@{/ q +@end group + +@group +# print the old line +x; p +@end group + +@group +# work on the new line now +x; bx +' +@end group +@end example +@c end--------------------------------------------- + +@node Reverse chars of lines +@section Reverse Characters of Lines + +This script can be used to reverse the position of characters +in lines. The technique moves two characters at a time, hence +it is faster than more intuitive implementations. + +Note the @code{tx} command before the definition of the label. +This is often needed to reset the flag that is tested by +the @code{t} command. + +Imaginative readers will find uses for this script. An example +is reversing the output of @command{banner}.@footnote{This requires +another script to pad the output of banner; for example + +@example +#! /bin/sh + +banner -w $1 $2 $3 $4 | + sed -e :a -e '/^.\@{0,'$1'\@}$/ @{ s/$/ /; ba; @}' | + ~/sedscripts/reverseline.sed +@end example +} + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +/../! b + +@group +# Reverse a line. Begin embedding the line between two newlines +s/^.*$/\ +&\ +/ +@end group + +@group +# Move first character at the end. The regexp matches until +# there are zero or one characters between the markers +tx +:x +s/\(\n.\)\(.*\)\(.\n\)/\3\2\1/ +tx +@end group + +@group +# Remove the newline markers +s/\n//g +@end group +@end example +@c end--------------------------------------------- + +@node tac +@section Reverse Lines of Files + +This one begins a series of totally useless (yet interesting) +scripts emulating various Unix commands. This, in particular, +is a @command{tac} workalike. + +Note that on implementations other than @acronym{GNU} @command{sed} +@ifset PERL +and @value{SSED} +@end ifset +this script might easily overflow internal buffers. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +# reverse all lines of input, i.e. first line became last, ... + +@group +# from the second line, the buffer (which contains all previous lines) +# is *appended* to current line, so, the order will be reversed +1! G +@end group + +@group +# on the last line we're done -- print everything +$ p +@end group + +@group +# store everything on the buffer again +h +@end group +@end example +@c end--------------------------------------------- + +@node cat -n +@section Numbering Lines + +This script replaces @samp{cat -n}; in fact it formats its output +exactly like @acronym{GNU} @command{cat} does. + +Of course this is completely useless and for two reasons: first, +because somebody else did it in C, second, because the following +Bourne-shell script could be used for the same purpose and would +be much faster: + +@c start------------------------------------------- +@example +@group +#! /bin/sh +sed -e "=" $@@ | sed -e ' + s/^/ / + N + s/^ *\(......\)\n/\1 / +' +@end group +@end example +@c end--------------------------------------------- + +It uses @command{sed} to print the line number, then groups lines two +by two using @code{N}. Of course, this script does not teach as much as +the one presented below. + +The algorithm used for incrementing uses both buffers, so the line +is printed as soon as possible and then discarded. The number +is split so that changing digits go in a buffer and unchanged ones go +in the other; the changed digits are modified in a single step +(using a @code{y} command). The line number for the next line +is then composed and stored in the hold space, to be used in the +next iteration. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +# Prime the pump on the first line +x +/^$/ s/^.*$/1/ +@end group + +@group +# Add the correct line number before the pattern +G +h +@end group + +@group +# Format it and print it +s/^/ / +s/^ *\(......\)\n/\1 /p +@end group + +@group +# Get the line number from hold space; add a zero +# if we're going to add a digit on the next line +g +s/\n.*$// +/^9*$/ s/^/0/ +@end group + +@group +# separate changing/unchanged digits with an x +s/.9*$/x&/ +@end group + +@group +# keep changing digits in hold space +h +s/^.*x// +y/0123456789/1234567890/ +x +@end group + +@group +# keep unchanged digits in pattern space +s/x.*$// +@end group + +@group +# compose the new number, remove the newline implicitly added by G +G +s/\n// +h +@end group +@end example +@c end--------------------------------------------- + +@node cat -b +@section Numbering Non-blank Lines + +Emulating @samp{cat -b} is almost the same as @samp{cat -n}---we only +have to select which lines are to be numbered and which are not. + +The part that is common to this script and the previous one is +not commented to show how important it is to comment @command{sed} +scripts properly... + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +/^$/ @{ + p + b +@} +@end group + +@group +# Same as cat -n from now +x +/^$/ s/^.*$/1/ +G +h +s/^/ / +s/^ *\(......\)\n/\1 /p +x +s/\n.*$// +/^9*$/ s/^/0/ +s/.9*$/x&/ +h +s/^.*x// +y/0123456789/1234567890/ +x +s/x.*$// +G +s/\n// +h +@end group +@end example +@c end--------------------------------------------- + +@node wc -c +@section Counting Characters + +This script shows another way to do arithmetic with @command{sed}. +In this case we have to add possibly large numbers, so implementing +this by successive increments would not be feasible (and possibly +even more complicated to contrive than this script). + +The approach is to map numbers to letters, kind of an abacus +implemented with @command{sed}. @samp{a}s are units, @samp{b}s are +tens and so on: we simply add the number of characters +on the current line as units, and then propagate the carry +to tens, hundreds, and so on. + +As usual, running totals are kept in hold space. + +On the last line, we convert the abacus form back to decimal. +For the sake of variety, this is done with a loop rather than +with some 80 @code{s} commands@footnote{Some implementations +have a limit of 199 commands per script}: first we +convert units, removing @samp{a}s from the number; then we +rotate letters so that tens become @samp{a}s, and so on +until no more letters remain. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +# Add n+1 a's to hold space (+1 is for the newline) +s/./a/g +H +x +s/\n/a/ +@end group + +@group +# Do the carry. The t's and b's are not necessary, +# but they do speed up the thing +t a +: a; s/aaaaaaaaaa/b/g; t b; b done +: b; s/bbbbbbbbbb/c/g; t c; b done +: c; s/cccccccccc/d/g; t d; b done +: d; s/dddddddddd/e/g; t e; b done +: e; s/eeeeeeeeee/f/g; t f; b done +: f; s/ffffffffff/g/g; t g; b done +: g; s/gggggggggg/h/g; t h; b done +: h; s/hhhhhhhhhh//g +@end group + +@group +: done +$! @{ + h + b +@} +@end group + +# On the last line, convert back to decimal + +@group +: loop +/a/! s/[b-h]*/&0/ +s/aaaaaaaaa/9/ +s/aaaaaaaa/8/ +s/aaaaaaa/7/ +s/aaaaaa/6/ +s/aaaaa/5/ +s/aaaa/4/ +s/aaa/3/ +s/aa/2/ +s/a/1/ +@end group + +@group +: next +y/bcdefgh/abcdefg/ +/[a-h]/ b loop +p +@end group +@end example +@c end--------------------------------------------- + +@node wc -w +@section Counting Words + +This script is almost the same as the previous one, once each +of the words on the line is converted to a single @samp{a} +(in the previous script each letter was changed to an @samp{a}). + +It is interesting that real @command{wc} programs have optimized +loops for @samp{wc -c}, so they are much slower at counting +words rather than characters. This script's bottleneck, +instead, is arithmetic, and hence the word-counting one +is faster (it has to manage smaller numbers). + +Again, the common parts are not commented to show the importance +of commenting @command{sed} scripts. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +# Convert words to a's +s/[ @kbd{tab}][ @kbd{tab}]*/ /g +s/^/ / +s/ [^ ][^ ]*/a /g +s/ //g +@end group + +@group +# Append them to hold space +H +x +s/\n// +@end group + +@group +# From here on it is the same as in wc -c. +/aaaaaaaaaa/! bx; s/aaaaaaaaaa/b/g +/bbbbbbbbbb/! bx; s/bbbbbbbbbb/c/g +/cccccccccc/! bx; s/cccccccccc/d/g +/dddddddddd/! bx; s/dddddddddd/e/g +/eeeeeeeeee/! bx; s/eeeeeeeeee/f/g +/ffffffffff/! bx; s/ffffffffff/g/g +/gggggggggg/! bx; s/gggggggggg/h/g +s/hhhhhhhhhh//g +:x +$! @{ h; b; @} +:y +/a/! s/[b-h]*/&0/ +s/aaaaaaaaa/9/ +s/aaaaaaaa/8/ +s/aaaaaaa/7/ +s/aaaaaa/6/ +s/aaaaa/5/ +s/aaaa/4/ +s/aaa/3/ +s/aa/2/ +s/a/1/ +y/bcdefgh/abcdefg/ +/[a-h]/ by +p +@end group +@end example +@c end--------------------------------------------- + +@node wc -l +@section Counting Lines + +No strange things are done now, because @command{sed} gives us +@samp{wc -l} functionality for free!!! Look: + +@c start------------------------------------------- +@example +@group +#!/usr/bin/sed -nf +$= +@end group +@end example +@c end--------------------------------------------- + +@node head +@section Printing the First Lines + +This script is probably the simplest useful @command{sed} script. +It displays the first 10 lines of input; the number of displayed +lines is right before the @code{q} command. + +@c start------------------------------------------- +@example +@group +#!/usr/bin/sed -f +10q +@end group +@end example +@c end--------------------------------------------- + +@node tail +@section Printing the Last Lines + +Printing the last @var{n} lines rather than the first is more complex +but indeed possible. @var{n} is encoded in the second line, before +the bang character. + +This script is similar to the @command{tac} script in that it keeps the +final output in the hold space and prints it at the end: + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +1! @{; H; g; @} +1,10 !s/[^\n]*\n// +$p +h +@end group +@end example +@c end--------------------------------------------- + +Mainly, the scripts keeps a window of 10 lines and slides it +by adding a line and deleting the oldest (the substitution command +on the second line works like a @code{D} command but does not +restart the loop). + +The ``sliding window'' technique is a very powerful way to write +efficient and complex @command{sed} scripts, because commands like +@code{P} would require a lot of work if implemented manually. + +To introduce the technique, which is fully demonstrated in the +rest of this chapter and is based on the @code{N}, @code{P} +and @code{D} commands, here is an implementation of @command{tail} +using a simple ``sliding window.'' + +This looks complicated but in fact the working is the same as +the last script: after we have kicked in the appropriate number +of lines, however, we stop using the hold space to keep inter-line +state, and instead use @code{N} and @code{D} to slide pattern +space by one line: + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +@group +1h +2,10 @{; H; g; @} +$q +1,9d +N +D +@end group +@end example +@c end--------------------------------------------- + +Note how the first, second and fourth line are inactive after +the first ten lines of input. After that, all the script does +is: exiting on the last line of input, appending the next input +line to pattern space, and removing the first line. + +@node uniq +@section Make Duplicate Lines Unique + +This is an example of the art of using the @code{N}, @code{P} +and @code{D} commands, probably the most difficult to master. + +@c start------------------------------------------- +@example +@group +#!/usr/bin/sed -f +h +@end group + +@group +:b +# On the last line, print and exit +$b +N +/^\(.*\)\n\1$/ @{ + # The two lines are identical. Undo the effect of + # the n command. + g + bb +@} +@end group + +@group +# If the @code{N} command had added the last line, print and exit +$b +@end group + +@group +# The lines are different; print the first and go +# back working on the second. +P +D +@end group +@end example +@c end--------------------------------------------- + +As you can see, we mantain a 2-line window using @code{P} and @code{D}. +This technique is often used in advanced @command{sed} scripts. + +@node uniq -d +@section Print Duplicated Lines of Input + +This script prints only duplicated lines, like @samp{uniq -d}. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +$b +N +/^\(.*\)\n\1$/ @{ + # Print the first of the duplicated lines + s/.*\n// + p +@end group + +@group + # Loop until we get a different line + :b + $b + N + /^\(.*\)\n\1$/ @{ + s/.*\n// + bb + @} +@} +@end group + +@group +# The last line cannot be followed by duplicates +$b +@end group + +@group +# Found a different one. Leave it alone in the pattern space +# and go back to the top, hunting its duplicates +D +@end group +@end example +@c end--------------------------------------------- + +@node uniq -u +@section Remove All Duplicated Lines + +This script prints only unique lines, like @samp{uniq -u}. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +@group +# Search for a duplicate line --- until that, print what you find. +$b +N +/^\(.*\)\n\1$/ ! @{ + P + D +@} +@end group + +@group +:c +# Got two equal lines in pattern space. At the +# end of the file we simply exit +$d +@end group + +@group +# Else, we keep reading lines with @code{N} until we +# find a different one +s/.*\n// +N +/^\(.*\)\n\1$/ @{ + bc +@} +@end group + +@group +# Remove the last instance of the duplicate line +# and go back to the top +D +@end group +@end example +@c end--------------------------------------------- + +@node cat -s +@section Squeezing Blank Lines + +As a final example, here are three scripts, of increasing complexity +and speed, that implement the same function as @samp{cat -s}, that is +squeezing blank lines. + +The first leaves a blank line at the beginning and end if there are +some already. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +@group +# on empty lines, join with next +# Note there is a star in the regexp +:x +/^\n*$/ @{ +N +bx +@} +@end group + +@group +# now, squeeze all '\n', this can be also done by: +# s/^\(\n\)*/\1/ +s/\n*/\ +/ +@end group +@end example +@c end--------------------------------------------- + +This one is a bit more complex and removes all empty lines +at the beginning. It does leave a single blank line at end +if one was there. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -f + +@group +# delete all leading empty lines +1,/^./@{ +/./!d +@} +@end group + +@group +# on an empty line we remove it and all the following +# empty lines, but one +:x +/./!@{ +N +s/^\n$// +tx +@} +@end group +@end example +@c end--------------------------------------------- + +This removes leading and trailing blank lines. It is also the +fastest. Note that loops are completely done with @code{n} and +@code{b}, without relying on @command{sed} to restart the +the script automatically at the end of a line. + +@c start------------------------------------------- +@example +#!/usr/bin/sed -nf + +@group +# delete all (leading) blanks +/./!d +@end group + +@group +# get here: so there is a non empty +:x +# print it +p +# get next +n +# got chars? print it again, etc... +/./bx +@end group + +@group +# no, don't have chars: got an empty line +:z +# get next, if last line we finish here so no trailing +# empty lines are written +n +# also empty? then ignore it, and get next... this will +# remove ALL empty lines +/./!bz +@end group + +@group +# all empty lines were deleted/ignored, but we have a non empty. As +# what we want to do is to squeeze, insert a blank line artificially +i\ +@end group + +bx +@end example +@c end--------------------------------------------- + +@node Limitations +@chapter @value{SSED}'s Limitations and Non-limitations + +@cindex @acronym{GNU} extensions, unlimited line length +@cindex Portability, line length limitations +For those who want to write portable @command{sed} scripts, +be aware that some implementations have been known to +limit line lengths (for the pattern and hold spaces) +to be no more than 4000 bytes. +The @sc{posix} standard specifies that conforming @command{sed} +implementations shall support at least 8192 byte line lengths. +@value{SSED} has no built-in limit on line length; +as long as it can @code{malloc()} more (virtual) memory, +you can feed or construct lines as long as you like. + +However, recursion is used to handle subpatterns and indefinite +repetition. This means that the available stack space may limit +the size of the buffer that can be processed by certain patterns. + +@ifset PERL +There are some size limitations in the regular expression +matcher but it is hoped that they will never in practice +be relevant. The maximum length of a compiled pattern +is 65539 (sic) bytes. All values in repeating quantifiers +must be less than 65536. The maximum nesting depth of +all parenthesized subpatterns, including capturing and +non-capturing subpatterns@footnote{The +distinction is meaningful when referring to Perl-style +regular expressions.}, assertions, and other types of +subpattern, is 200. + +Also, @value{SSED} recognizes the @sc{posix} syntax +@code{[.@var{ch}.]} and @code{[=@var{ch}=]} +where @var{ch} is a ``collating element'', but these +are not supported, and an error is given if they are +encountered. + +Here are a few distinctions between the real Perl-style +regular expressions and those that @option{-R} recognizes. + +@enumerate +@item +Lookahead assertions do not allow repeat quantifiers after them +Perl permits them, but they do not mean what you +might think. For example, @samp{(?!a)@{3@}} does not assert that the +next three characters are not @samp{a}. It just asserts three times that the +next character is not @samp{a} --- a waste of time and nothing else. + +@item +Capturing subpatterns that occur inside negative lookahead +head assertions are counted, but their entries are counted +as empty in the second half of an @code{s} command. +Perl sets its numerical variables from any such patterns +that are matched before the assertion fails to match +something (thereby succeeding), but only if the negative +lookahead assertion contains just one branch. + +@item +The following Perl escape sequences are not supported: +@samp{\l}, @samp{\u}, @samp{\L}, @samp{\U}, @samp{\E}, +@samp{\Q}. In fact these are implemented by Perl's general +string-handling and are not part of its pattern matching engine. + +@item +The Perl @samp{\G} assertion is not supported as it is not +relevant to single pattern matches. + +@item +Fairly obviously, @value{SSED} does not support the @samp{(?@{code@})} +and @samp{(?p@{code@})} constructions. However, there is some experimental +support for recursive patterns using the non-Perl item @samp{(?R)}. + +@item +There are at the time of writing some oddities in Perl +5.005_02 concerned with the settings of captured strings +when part of a pattern is repeated. For example, matching +@samp{aba} against the pattern @samp{/^(a(b)?)+$/} sets +@samp{$2}@footnote{@samp{$2} would be @samp{\2} in @value{SSED}.} +to the value @samp{b}, but matching @samp{aabbaa} +against @samp{/^(aa(bb)?)+$/} leaves @samp{$2} +unset. However, if the pattern is changed to +@samp{/^(aa(b(b))?)+$/} then @samp{$2} (and @samp{$3}) are set. +In Perl 5.004 @samp{$2} is set in both cases, and that is also +true of @value{SSED}. + +@item +Another as yet unresolved discrepancy is that in Perl +5.005_02 the pattern @samp{/^(a)?(?(1)a|b)+$/} matches +the string @samp{a}, whereas in @value{SSED} it does not. +However, in both Perl and @value{SSED} @samp{/^(a)?a/} matched +against @samp{a} leaves $1 unset. +@end enumerate +@end ifset + +@node Other Resources +@chapter Other Resources for Learning About @command{sed} + +@cindex Additional reading about @command{sed} +In addition to several books that have been written about @command{sed} +(either specifically or as chapters in books which discuss +shell programming), one can find out more about @command{sed} +(including suggestions of a few books) from the FAQ +for the @code{sed-users} mailing list, available from any of: +@display + @uref{http://www.student.northpark.edu/pemente/sed/sedfaq.html} + @uref{http://sed.sf.net/grabbag/tutorials/sedfaq.html} +@end display + +Also of interest are +@uref{http://www.student.northpark.edu/pemente/sed/index.htm} +and @uref{http://sed.sf.net/grabbag}, +which include @command{sed} tutorials and other @command{sed}-related goodies. + +The @code{sed-users} mailing list itself maintained by Sven Guckes. +To subscribe, visit @uref{http://groups.yahoo.com} and search +for the @code{sed-users} mailing list. + +@node Reporting Bugs +@chapter Reporting Bugs + +@cindex Bugs, reporting +Email bug reports to @email{bonzini@@gnu.org}. +Be sure to include the word ``sed'' somewhere in the @code{Subject:} field. +Also, please include the output of @samp{sed --version} in the body +of your report if at all possible. + +Please do not send a bug report like this: + +@example +@i{while building frobme-1.3.4} +$ configure +@error{} sed: file sedscr line 1: Unknown option to 's' +@end example + +If @value{SSED} doesn't configure your favorite package, take a +few extra minutes to identify the specific problem and make a stand-alone +test case. Unlike other programs such as C compilers, making such test +cases for @command{sed} is quite simple. + +A stand-alone test case includes all the data necessary to perform the +test, and the specific invocation of @command{sed} that causes the problem. +The smaller a stand-alone test case is, the better. A test case should +not involve something as far removed from @command{sed} as ``try to configure +frobme-1.3.4''. Yes, that is in principle enough information to look +for the bug, but that is not a very practical prospect. + +Here are a few commonly reported bugs that are not bugs. + +@table @asis +@item @code{N} command on the last line +@cindex Portability, @code{N} command on the last line +@cindex Non-bugs, @code{N} command on the last line + +Most versions of @command{sed} exit without printing anything when +the @command{N} command is issued on the last line of a file. +@value{SSED} prints pattern space before exiting unless of course +the @command{-n} command switch has been specified. This choice is +by design. + +For example, the behavior of +@example +sed N foo bar +@end example +@noindent +would depend on whether foo has an even or an odd number of +lines@footnote{which is the actual ``bug'' that prompted the +change in behavior}. Or, when writing a script to read the +next few lines following a pattern match, traditional +implementations of @code{sed} would force you to write +something like +@example +/foo/@{ $!N; $!N; $!N; $!N; $!N; $!N; $!N; $!N; $!N @} +@end example +@noindent +instead of just +@example +/foo/@{ N;N;N;N;N;N;N;N;N; @} +@end example + +@cindex @code{POSIXLY_CORRECT} behavior, @code{N} command +In any case, the simplest workaround is to use @code{$d;N} in +scripts that rely on the traditional behavior, or to set +the @code{POSIXLY_CORRECT} variable to a non-empty value. + +@item Regex syntax clashes (problems with backslashes) +@cindex @acronym{GNU} extensions, to basic regular expressions +@cindex Non-bugs, regex syntax clashes +@command{sed} uses the @sc{posix} basic regular expression syntax. According to +the standard, the meaning of some escape sequences is undefined in +this syntax; notable in the case of @command{sed} are @code{\|}, +@code{\+}, @code{\?}, @code{\`}, @code{\'}, @code{\<}, +@code{\>}, @code{\b}, @code{\B}, @code{\w}, and @code{\W}. + +As in all @acronym{GNU} programs that use @sc{posix} basic regular +expressions, @command{sed} interprets these escape sequences as special +characters. So, @code{x\+} matches one or more occurrences of @samp{x}. +@code{abc\|def} matches either @samp{abc} or @samp{def}. + +This syntax may cause problems when running scripts written for other +@command{sed}s. Some @command{sed} programs have been written with the +assumption that @code{\|} and @code{\+} match the literal characters +@code{|} and @code{+}. Such scripts must be modified by removing the +spurious backslashes if they are to be used with modern implementations +of @command{sed}, like +@ifset PERL +@value{SSED} or +@end ifset +@acronym{GNU} @command{sed}. + +On the other hand, some scripts use s|abc\|def||g to remove occurrences +of @emph{either} @code{abc} or @code{def}. While this worked until +@command{sed} 4.0.x, newer versions interpret this as removing the +string @code{abc|def}. This is again undefined behavior according to +@acronym{POSIX}, and this interpretation is arguably more robust: older +@command{sed}s, for example, required that the regex matcher parsed +@code{\/} as @code{/} in the common case of escaping a slash, which is +again undefined behavior; the new behavior avoids this, and this is good +because the regex matcher is only partially under our control. + +@cindex @acronym{GNU} extensions, special escapes +In addition, this version of @command{sed} supports several escape characters +(some of which are multi-character) to insert non-printable characters +in scripts (@code{\a}, @code{\c}, @code{\d}, @code{\o}, @code{\r}, +@code{\t}, @code{\v}, @code{\x}). These can cause similar problems +with scripts written for other @command{sed}s. + +@item @option{-i} clobbers read-only files +@cindex In-place editing +@cindex @value{SSEDEXT}, in-place editing +@cindex Non-bugs, in-place editing + +In short, @samp{sed -i} will let you delete the contents of +a read-only file, and in general the @option{-i} option +(@pxref{Invoking sed, , Invocation}) lets you clobber +protected files. This is not a bug, but rather a consequence +of how the Unix filesystem works. + +The permissions on a file say what can happen to the data +in that file, while the permissions on a directory say what can +happen to the list of files in that directory. @samp{sed -i} +will not ever open for writing a file that is already on disk. +Rather, it will work on a temporary file that is finally renamed +to the original name: if you rename or delete files, you're actually +modifying the contents of the directory, so the operation depends on +the permissions of the directory, not of the file. For this same +reason, @command{sed} does not let you use @option{-i} on a writeable file +in a read-only directory (but unbelievably nobody reports that as a +bug@dots{}). + +@item @code{0a} does not work (gives an error) +There is no line 0. 0 is a special address that is only used to treat +addresses like @code{0,/@var{RE}/} as active when the script starts: if +you write @code{1,/abc/d} and the first line includes the word @samp{abc}, +then that match would be ignored because address ranges must span at least +two lines (barring the end of the file); but what you probably wanted is +to delete every line up to the first one including @samp{abc}, and this +is obtained with @code{0,/abc/d}. + +@ifclear PERL +@item @code{[a-z]} is case insensitive +You are encountering problems with locales. POSIX mandates that @code{[a-z]} +uses the current locale's collation order -- in C parlance, that means using +@code{strcoll(3)} instead of @code{strcmp(3)}. Some locales have a +case-insensitive collation order, others don't: one of those that have +problems is Estonian. + +Another problem is that @code{[a-z]} tries to use collation symbols. +This only happens if you are on the @acronym{GNU} system, using +@acronym{GNU} libc's regular expression matcher instead of compiling the +one supplied with @acronym{GNU} sed. In a Danish locale, for example, +the regular expression @code{^[a-z]$} matches the string @samp{aa}, +because this is a single collating symbol that comes after @samp{a} +and before @samp{b}; @samp{ll} behaves similarly in Spanish +locales, or @samp{ij} in Dutch locales. + +To work around these problems, which may cause bugs in shell scripts, set +the @env{LC_COLLATE} and @env{LC_CTYPE} environment variables to @samp{C}. +@end ifclear +@end table + + +@node Extended regexps +@appendix Extended regular expressions +@cindex Extended regular expressions, syntax + +The only difference between basic and extended regular expressions is in +the behavior of a few characters: @samp{?}, @samp{+}, parentheses, +and braces (@samp{@{@}}). While basic regular expressions require +these to be escaped if you want them to behave as special characters, +when using extended regular expressions you must escape them if +you want them @emph{to match a literal character}. + +@noindent +Examples: +@table @code +@item abc? +becomes @samp{abc\?} when using extended regular expressions. It matches +the literal string @samp{abc?}. + +@item c\+ +becomes @samp{c+} when using extended regular expressions. It matches +one or more @samp{c}s. + +@item a\@{3,\@} +becomes @samp{a@{3,@}} when using extended regular expressions. It matches +three or more @samp{a}s. + +@item \(abc\)\@{2,3\@} +becomes @samp{(abc)@{2,3@}} when using extended regular expressions. It +matches either @samp{abcabc} or @samp{abcabcabc}. + +@item \(abc*\)\1 +becomes @samp{(abc*)\1} when using extended regular expressions. +Backreferences must still be escaped when using extended regular +expressions. +@end table + +@ifset PERL +@node Perl regexps +@appendix Perl-style regular expressions +@cindex Perl-style regular expressions, syntax + +@emph{This part is taken from the @file{pcre.txt} file distributed together +with the free @sc{pcre} regular expression matcher; it was written by Philip Hazel.} + +Perl introduced several extensions to regular expressions, some +of them incompatible with the syntax of regular expressions +accepted by Emacs and other @acronym{GNU} tools (whose matcher was +based on the Emacs matcher). @value{SSED} implements +both kinds of extensions. + +@iftex +Summarizing, we have: + +@itemize @bullet +@item +A backslash can introduce several special sequences + +@item +The circumflex, dollar sign, and period characters behave specially +with regard to new lines + +@item +Strange uses of square brackets are parsed differently + +@item +You can toggle modifiers in the middle of a regular expression + +@item +You can specify that a subpattern does not count when numbering backreferences + +@item +@cindex Greedy regular expression matching +You can specify greedy or non-greedy matching + +@item +You can have more than ten back references + +@item +You can do complex look aheads and look behinds (in the spirit of +@code{\b}, but with subpatterns). + +@item +You can often improve performance by avoiding that @command{sed} wastes +time with backtracking + +@item +You can have if/then/else branches + +@item +You can do recursive matches, for example to look for unbalanced parentheses + +@item +You can have comments and non-significant whitespace, because things can +get complex... +@end itemize + +Most of these extensions are introduced by the special @code{(?} +sequence, which gives special meanings to parenthesized groups. +@end iftex +@menu +Other extensions can be roughly subdivided in two categories +On one hand Perl introduces several more escaped sequences +(that is, sequences introduced by a backslash). On the other +hand, it specifies that if a question mark follows an open +parentheses it should give a special meaning to the parenthesized +group. + +* Backslash:: Introduces special sequences +* Circumflex/dollar sign/period:: Behave specially with regard to new lines +* Square brackets:: Are a bit different in strange cases +* Options setting:: Toggle modifiers in the middle of a regexp +* Non-capturing subpatterns:: Are not counted when backreferencing +* Repetition:: Allows for non-greedy matching +* Backreferences:: Allows for more than 10 back references +* Assertions:: Allows for complex look ahead matches +* Non-backtracking subpatterns:: Often gives more performance +* Conditional subpatterns:: Allows if/then/else branches +* Recursive patterns:: For example to match parentheses +* Comments:: Because things can get complex... +@end menu + +@node Backslash +@appendixsec Backslash +@cindex Perl-style regular expressions, escaped sequences + +There are a few difference in the handling of backslashed +sequences in Perl mode. + +First of all, there are no @code{\o} and @code{\d} sequences. +@sc{ascii} values for characters can be specified in octal +with a @code{\@var{xxx}} sequence, where @var{xxx} is a +sequence of up to three octal digits. If the first digit +is a zero, the treatment of the sequence is straightforward; +just note that if the character that follows the escaped digit +is itself an octal digit, you have to supply three octal digits +for @var{xxx}. For example @code{\07} is a @sc{bel} character +rather than a @sc{nul} and a literal @code{7} (this sequence is +instead represented by @code{\0007}). + +@cindex Perl-style regular expressions, backreferences +The handling of a backslash followed by a digit other than 0 +is complicated. Outside a character class, @command{sed} reads it +and any following digits as a decimal number. If the number +is less than 10, or if there have been at least that many +previous capturing left parentheses in the expression, the +entire sequence is taken as a back reference. A description +of how this works is given later, following the discussion +of parenthesized subpatterns. + +Inside a character class, or if the decimal number is +greater than 9 and there have not been that many capturing +subpatterns, @command{sed} re-reads up to three octal digits following +the backslash, and generates a single byte from the +least significant 8 bits of the value. Any subsequent digits +stand for themselves. For example: + +@example + \040 @i{is another way of writing a space} + \40 @i{is the same, provided there are fewer than 40} + @i{previous capturing subpatterns} + \7 @i{is always a back reference} + \011 @i{is always a tab} + \11 @i{might be a back reference, or another way of} + @i{writing a tab} + \0113 @i{is a tab followed by the character @samp{3}} + \113 @i{is the character with octal code 113 (since there} + @i{can be no more than 99 back references)} + \377 @i{is a byte consisting entirely of 1 bits (@sc{ascii} 255)} + \81 @i{is either a back reference, or a binary zero} + @i{followed by the two characters @samp{81}} +@end example + +Note that octal values of 100 or greater must not be introduced +duced by a leading zero, because no more than three octal +digits are ever read. + +All the sequences that define a single byte value can be +used both inside and outside character classes. In addition, +inside a character class, the sequence @code{\b} is interpreted +as the backspace character (hex 08). Outside a character +class it has a different meaning (see below). + +In addition, there are four additional escapes specifying +generic character classes (like @code{\w} and @code{\W} do): + +@cindex Perl-style regular expressions, character classes +@table @samp +@item \d +Matches any decimal digit + +@item \D +Matches any character that is not a decimal digit +@end table + +In Perl mode, these character type sequences can appear both inside and +outside character classes. Instead, in @sc{posix} mode these sequences +(as well as @code{\w} and @code{\W}) are treated as two literal characters +(a backslash and a letter) inside square brackets. + +Escaped sequences specifying assertions are also different in +Perl mode. An assertion specifies a condition that has to be met +at a particular point in a match, without consuming any +characters from the subject string. The use of subpatterns +for more complicated assertions is described below. The +backslashed assertions are + +@cindex Perl-style regular expressions, assertions +@table @samp +@item \b +Asserts that the point is at a word boundary. +A word boundary is a position in the subject string where +the current character and the previous character do not both +match @code{\w} or @code{\W} (i.e. one matches @code{\w} and +the other matches @code{\W}), or the start or end of the string +if the first or last character matches @code{\w}, respectively. + +@item \B +Asserts that the point is not at a word boundary. + +@item \A +Asserts the matcher is at the start of pattern space (independent +of multiline mode). + +@item \Z +Asserts the matcher is at the end of pattern space, +or at a newline before the end of pattern space (independent of +multiline mode) + +@item \z +Asserts the matcher is at the end of pattern space (independent +of multiline mode) +@end table + +These assertions may not appear in character classes (but +note that @code{\b} has a different meaning, namely the +backspace character, inside a character class). +Note that Perl mode does not support directly assertions +for the beginning and the end of word; the @acronym{GNU} extensions +@code{\<} and @code{\>} achieve this purpose in @sc{posix} mode +instead. + +The @code{\A}, @code{\Z}, and @code{\z} assertions differ +from the traditional circumflex and dollar sign (described below) +in that they only ever match at the very start and end of the +subject string, whatever options are set; in particular @code{\A} +and @code{\z} are the same as the @acronym{GNU} extensions +@code{\`} and @code{\'} that are active in @sc{posix} mode. + +@node Circumflex/dollar sign/period +@appendixsec Circumflex, dollar sign, period +@cindex Perl-style regular expressions, newlines + +Outside a character class, in the default matching mode, the +circumflex character is an assertion which is true only if +the current matching point is at the start of the subject +string. Inside a character class, the circumflex has an entirely +different meaning (see below). + +The circumflex need not be the first character of the pattern if +a number of alternatives are involved, but it should be the +first thing in each alternative in which it appears if the +pattern is ever to match that branch. If all possible alternatives, +start with a circumflex, that is, if the pattern is +constrained to match only at the start of the subject, it is +said to be an @dfn{anchored} pattern. (There are also other constructs +structs that can cause a pattern to be anchored.) + +A dollar sign is an assertion which is true only if the +current matching point is at the end of the subject string, +or immediately before a newline character that is the last +character in the string (by default). A dollar sign need not be the +last character of the pattern if a number of alternatives +are involved, but it should be the last item in any branch +in which it appears. A dollar sign has no special meaning in a +character class. + +@cindex Perl-style regular expressions, multiline +The meanings of the circumflex and dollar sign characters are +changed if the @code{M} modifier option is used. When this is +the case, they match immediately after and immediately +before an internal @code{\n} character, respectively, in addition +to matching at the start and end of the subject string. For +example, the pattern @code{/^abc$/} matches the subject string +@samp{def\nabc} in multiline mode, but not otherwise. Consequently, +patterns that are anchored in single line mode +because all branches start with @code{^} are not anchored in +multiline mode. + +@cindex Perl-style regular expressions, multiline +Note that the sequences @code{\A}, @code{\Z}, and @code{\z} +can be used to match the start and end of the subject in both +modes, and if all branches of a pattern start with @code{\A} +is it always anchored, whether the @code{M} modifier is set or not. + +@cindex Perl-style regular expressions, single line +Outside a character class, a dot in the pattern matches any +one character in the subject, including a non-printing character, +but not (by default) newline. If the @code{S} modifier is used, +dots match newlines as well. Actually, the handling of +dot is entirely independent of the handling of circumflex +and dollar sign, the only relationship being that they both +involve newline characters. Dot has no special meaning in a +character class. + +@node Square brackets +@appendixsec Square brackets +@cindex Perl-style regular expressions, character classes + +An opening square bracket introduces a character class, terminated +by a closing square bracket. A closing square bracket on its own +is not special. If a closing square bracket is required as a +member of the class, it should be the first data character in +the class (after an initial circumflex, if present) or escaped with a backslash. + +A character class matches a single character in the subject; +the character must be in the set of characters defined by +the class, unless the first character in the class is a circumflex, +in which case the subject character must not be in +the set defined by the class. If a circumflex is actually +required as a member of the class, ensure it is not the +first character, or escape it with a backslash. + +For example, the character class [aeiou] matches any lower +case vowel, while [^aeiou] matches any character that is not +a lower case vowel. Note that a circumflex is just a convenient +venient notation for specifying the characters which are in +the class by enumerating those that are not. It is not an +assertion: it still consumes a character from the subject +string, and fails if the current pointer is at the end of +the string. + +@cindex Perl-style regular expressions, case-insensitive +When caseless matching is set, any letters in a class +represent both their upper case and lower case versions, so +for example, a caseless @code{[aeiou]} matches uppercase +and lowercase @samp{A}s, and a caseless @code{[^aeiou]} +does not match @samp{A}, whereas a case-sensitive version would. + +@cindex Perl-style regular expressions, single line +@cindex Perl-style regular expressions, multiline +The newline character is never treated in any special way in +character classes, whatever the setting of the @code{S} and +@code{M} options (modifiers) is. A class such as @code{[^a]} will +always match a newline. + +The minus (hyphen) character can be used to specify a range +of characters in a character class. For example, @code{[d-m]} +matches any letter between d and m, inclusive. If a minus +character is required in a class, it must be escaped with a +backslash or appear in a position where it cannot be interpreted +as indicating a range, typically as the first or last +character in the class. + +It is not possible to have the literal character @code{]} as the +end character of a range. A pattern such as @code{[W-]46]} is +interpreted as a class of two characters (@code{W} and @code{-}) +followed by a literal string @code{46]}, so it would match +@samp{W46]} or @samp{-46]}. However, if the @code{]} is escaped +with a backslash it is interpreted as the end of range, so +@code{[W-\]46]} is interpreted as a single class containing a +range followed by two separate characters. The octal or +hexadecimal representation of @code{]} can also be used to end a range. + +Ranges operate in @sc{ascii} collating sequence. They can also be +used for characters specified numerically, for example +@code{[\000-\037]}. If a range that includes letters is used when +caseless matching is set, it matches the letters in either +case. For example, a caseless @code{[W-c]} is equivalent to +@code{[][\^_`wxyzabc]}, matched caselessly, and if character +tables for the French locale are in use, @code{[\xc8-\xcb]} +matches accented E characters in both cases. + +Unlike in @sc{posix} mode, the character types @code{\d}, +@code{\D}, @code{\s}, @code{\S}, @code{\w}, and @code{\W} +may also appear in a character class, and add the characters +that they match to the class. For example, @code{[\dABCDEF]} matches any +hexadecimal digit. A circumflex can conveniently be used +with the upper case character types to specify a more restricted +set of characters than the matching lower case type. +For example, the class @code{[^\W_]} matches any letter or digit, +but not underscore. + +All non-alphameric characters other than @code{\}, @code{-}, +@code{^} (at the start) and the terminating @code{]} +are non-special in character classes, but it does no harm +if they are escaped. + +Perl 5.6 supports the @sc{posix} notation for character classes, which +uses names enclosed by @code{[:} and @code{:]} within the enclosing +square brackets, and @value{SSED} supports this notation as well. +For example, + +@example + [01[:alpha:]%] +@end example + +@noindent +matches @samp{0}, @samp{1}, any alphabetic character, or @samp{%}. +The supported class names are + +@table @code +@item alnum +Matches letters and digits + +@item alpha +Matches letters + +@item ascii +Matches character codes 0 - 127 + +@item cntrl +Matches control characters + +@item digit +Matches decimal digits (same as \d) + +@item graph +Matches printing characters, excluding space + +@item lower +Matches lower case letters + +@item print +Matches printing characters, including space + +@item punct +Matches printing characters, excluding letters and digits + +@item space +Matches white space (same as \s) + +@item upper +Matches upper case letters + +@item word +Matches ``word'' characters (same as \w) + +@item xdigit +Matches hexadecimal digits +@end table + +The names @code{ascii} and @code{word} are extensions valid only in +Perl mode. Another Perl extension is negation, which is +indicated by a circumflex character after the colon. For example, + +@example + [12[:^digit:]] +@end example + +@noindent +matches @samp{1}, @samp{2}, or any non-digit. + +@node Options setting +@appendixsec Options setting +@cindex Perl-style regular expressions, toggling options +@cindex Perl-style regular expressions, case-insensitive +@cindex Perl-style regular expressions, multiline +@cindex Perl-style regular expressions, single line +@cindex Perl-style regular expressions, extended + +The settings of the @code{I}, @code{M}, @code{S}, @code{X} +modifiers can be changed from within the pattern by +a sequence of Perl option letters enclosed between @code{(?} +and @code{)}. The option letters must be lowercase. + +For example, @code{(?im)} sets caseless, multiline matching. It is +also possible to unset these options by preceding the letter +with a hyphen; you can also have combined settings and unsettings: +@code{(?im-sx)} sets caseless and multiline matching, +while unsets single line matching (for dots) and extended +whitespace interpretation. If a letter appears both before +and after the hyphen, the option is unset. + +The scope of these option changes depends on where in the +pattern the setting occurs. For settings that are outside +any subpattern (defined below), the effect is the same as if +the options were set or unset at the start of matching. The +following patterns all behave in exactly the same way: + +@example + (?i)abc + a(?i)bc + ab(?i)c + abc(?i) +@end example + +which in turn is the same as specifying the pattern abc with +the @code{I} modifier. In other words, ``top level'' settings +apply to the whole pattern (unless there are other +changes inside subpatterns). If there is more than one setting +of the same option at top level, the rightmost setting +is used. + +If an option change occurs inside a subpattern, the effect +is different. This is a change of behaviour in Perl 5.005. +An option change inside a subpattern affects only that part +of the subpattern @emph{that follows} it, so + +@example + (a(?i)b)c +@end example + +@noindent +matches abc and aBc and no other strings (assuming +case-sensitive matching is used). By this means, options can +be made to have different settings in different parts of the +pattern. Any changes made in one alternative do carry on +into subsequent branches within the same subpattern. For +example, + +@example + (a(?i)b|c) +@end example + +@noindent +matches @samp{ab}, @samp{aB}, @samp{c}, and @samp{C}, +even though when matching @samp{C} the first branch is +abandoned before the option setting. +This is because the effects of option settings happen at +compile time. There would be some very weird behaviour otherwise. + +@ignore +There are two PCRE-specific options PCRE_UNGREEDY and PCRE_EXTRA +that can be changed in the same way as the Perl-compatible options by +using the characters U and X respectively. The (?X) flag +setting is special in that it must always occur earlier in +the pattern than any of the additional features it turns on, +even when it is at top level. It is best put at the start. +@end ignore + + +@node Non-capturing subpatterns +@appendixsec Non-capturing subpatterns +@cindex Perl-style regular expressions, non-capturing subpatterns + +Marking part of a pattern as a subpattern does two things. +On one hand, it localizes a set of alternatives; on the other +hand, it sets up the subpattern as a capturing subpattern (as +defined above). The subpattern can be backreferenced and +referenced in the right side of @code{s} commands. + +For example, if the string @samp{the red king} is matched against +the pattern + +@example + the ((red|white) (king|queen)) +@end example + +@noindent +the captured substrings are @samp{red king}, @samp{red}, +and @samp{king}, and are numbered 1, 2, and 3. + +The fact that plain parentheses fulfil two functions is not +always helpful. There are often times when a grouping +subpattern is required without a capturing requirement. If an +opening parenthesis is followed by @code{?:}, the subpattern does +not do any capturing, and is not counted when computing the +number of any subsequent capturing subpatterns. For example, +if the string @samp{the white queen} is matched against the pattern + +@example + the ((?:red|white) (king|queen)) +@end example + +@noindent +the captured substrings are @samp{white queen} and @samp{queen}, +and are numbered 1 and 2. The maximum number of captured +substrings is 99, while the maximum number of all subpatterns, +both capturing and non-capturing, is 200. + +As a convenient shorthand, if any option settings are +equired at the start of a non-capturing subpattern, the +option letters may appear between the @code{?} and the +@code{:}. Thus the two patterns + +@example + (?i:saturday|sunday) + (?:(?i)saturday|sunday) +@end example + +@noindent +match exactly the same set of strings. Because alternative +branches are tried from left to right, and options are not +reset until the end of the subpattern is reached, an option +setting in one branch does affect subsequent branches, so +the above patterns match @samp{SUNDAY} as well as @samp{Saturday}. + + +@node Repetition +@appendixsec Repetition +@cindex Perl-style regular expressions, repetitions + +Repetition is specified by quantifiers, which can follow any +of the following items: + +@itemize @bullet +@item +a single character, possibly escaped + +@item +the @code{.} special character + +@item +a character class + +@item +a back reference (see next section) + +@item +a parenthesized subpattern (unless it is an assertion; @pxref{Assertions}) +@end itemize + +The general repetition quantifier specifies a minimum and +maximum number of permitted matches, by giving the two +numbers in curly brackets (braces), separated by a comma. +The numbers must be less than 65536, and the first must be +less than or equal to the second. For example: + +@example + z@{2,4@} +@end example + +@noindent +matches @samp{zz}, @samp{zzz}, or @samp{zzzz}. A closing brace on its own +is not a special character. If the second number is omitted, +but the comma is present, there is no upper limit; if the +second number and the comma are both omitted, the quantifier +specifies an exact number of required matches. Thus + +@example + [aeiou]@{3,@} +@end example + +@noindent +matches at least 3 successive vowels, but may match many +more, while + +@example + \d@{8@} +@end example + +@noindent +matches exactly 8 digits. An opening curly bracket that +appears in a position where a quantifier is not allowed, or +one that does not match the syntax of a quantifier, is taken +as a literal character. For example, @{,6@} is not a quantifier, +but a literal string of four characters.@footnote{It +raises an error if @option{-R} is not used.} + +The quantifier @samp{@{0@}} is permitted, causing the expression to +behave as if the previous item and the quantifier were not +present. + +For convenience (and historical compatibility) the three +most common quantifiers have single-character abbreviations: + +@table @code +@item * +is equivalent to @{0,@} + +@item + +is equivalent to @{1,@} + +@item ? +is equivalent to @{0,1@} +@end table + +It is possible to construct infinite loops by following a +subpattern that can match no characters with a quantifier +that has no upper limit, for example: + +@example + (a?)* +@end example + +Earlier versions of Perl used to give an error at +compile time for such patterns. However, because there are +cases where this can be useful, such patterns are now +accepted, but if any repetition of the subpattern does in +fact match no characters, the loop is forcibly broken. + +@cindex Greedy regular expression matching +@cindex Perl-style regular expressions, stingy repetitions +By default, the quantifiers are @dfn{greedy} like in @sc{posix} +mode, that is, they match as much as possible (up to the maximum +number of permitted times), without causing the rest of the +pattern to fail. The classic example of where this gives problems +is in trying to match comments in C programs. These appear between +the sequences @code{/*} and @code{*/} and within the sequence, individual +@code{*} and @code{/} characters may appear. An attempt to match C +comments by applying the pattern + +@example + /\*.*\*/ +@end example + +@noindent +to the string + +@example + /* first command */ not comment /* second comment */ +@end example + +@noindent + +fails, because it matches the entire string owing to the +greediness of the @code{.*} item. + +However, if a quantifier is followed by a question mark, it +ceases to be greedy, and instead matches the minimum number +of times possible, so the pattern @code{/\*.*?\*/} +does the right thing with the C comments. The meaning of the +various quantifiers is not otherwise changed, just the preferred +number of matches. Do not confuse this use of question +mark with its use as a quantifier in its own right. +Because it has two uses, it can sometimes appear doubled, as in + +@example + \d??\d +@end example + +which matches one digit by preference, but can match two if +that is the only way the rest of the pattern matches. + +Note that greediness does not matter when specifying addresses, +but can be nevertheless used to improve performance. + +@ignore + If the PCRE_UNGREEDY option is set (an option which is not + available in Perl), the quantifiers are not greedy by + default, but individual ones can be made greedy by following + them with a question mark. In other words, it inverts the + default behaviour. +@end ignore + +When a parenthesized subpattern is quantified with a minimum +repeat count that is greater than 1 or with a limited maximum, +more store is required for the compiled pattern, in +proportion to the size of the minimum or maximum. + +@cindex Perl-style regular expressions, single line +If a pattern starts with @code{.*} or @code{.@{0,@}} and the +@code{S} modifier is used, the pattern is implicitly anchored, +because whatever follows will be tried against every character +position in the subject string, so there is no point in +retrying the overall match at any position after the first. +PCRE treats such a pattern as though it were preceded by \A. + +When a capturing subpattern is repeated, the value captured +is the substring that matched the final iteration. For example, +after + +@example + (tweedle[dume]@{3@}\s*)+ +@end example + +@noindent +has matched @samp{tweedledum tweedledee} the value of the +captured substring is @samp{tweedledee}. However, if there are +nested capturing subpatterns, the corresponding captured +values may have been set in previous iterations. For example, +after + +@example + /(a|(b))+/ +@end example + +matches @samp{aba}, the value of the second captured substring is +@samp{b}. + +@node Backreferences +@appendixsec Backreferences +@cindex Perl-style regular expressions, backreferences + +Outside a character class, a backslash followed by a digit +greater than 0 (and possibly further digits) is a back +reference to a capturing subpattern earlier (i.e. to its +left) in the pattern, provided there have been that many +previous capturing left parentheses. + +However, if the decimal number following the backslash is +less than 10, it is always taken as a back reference, and +causes an error only if there are not that many capturing +left parentheses in the entire pattern. In other words, the +parentheses that are referenced need not be to the left of +the reference for numbers less than 10. @ref{Backslash} +for further details of the handling of digits following a backslash. + +A back reference matches whatever actually matched the capturing +subpattern in the current subject string, rather than +anything matching the subpattern itself. So the pattern + +@example + (sens|respons)e and \1ibility +@end example + +@noindent +matches @samp{sense and sensibility} and @samp{response and responsibility}, +but not @samp{sense and responsibility}. If caseful +matching is in force at the time of the back reference, the +case of letters is relevant. For example, + +@example + ((?i)blah)\s+\1 +@end example + +@noindent +matches @samp{blah blah} and @samp{Blah Blah}, but not +@samp{BLAH blah}, even though the original capturing +subpattern is matched caselessly. + +There may be more than one back reference to the same subpattern. +Also, if a subpattern has not actually been used in a +particular match, any back references to it always fail. For +example, the pattern + +@example + (a|(bc))\2 +@end example + +@noindent +always fails if it starts to match @samp{a} rather than +@samp{bc}. Because there may be up to 99 back references, all +digits following the backslash are taken as part of a potential +back reference number; this is different from what happens +in @sc{posix} mode. If the pattern continues with a digit +character, some delimiter must be used to terminate the back +reference. If the @code{X} modifier option is set, this can be +whitespace. Otherwise an empty comment can be used, or the +following character can be expressed in hexadecimal or octal. + +A back reference that occurs inside the parentheses to which +it refers fails when the subpattern is first used, so, for +example, @code{(a\1)} never matches. However, such references +can be useful inside repeated subpatterns. For example, the +pattern + +@example + (a|b\1)+ +@end example + +@noindent +matches any number of @samp{a}s and also @samp{aba}, @samp{ababbaa}, +etc. At each iteration of the subpattern, the back reference matches +the character string corresponding to the previous iteration. In +order for this to work, the pattern must be such that the first +iteration does not need to match the back reference. This can be +done using alternation, as in the example above, or by a +quantifier with a minimum of zero. + +@node Assertions +@appendixsec Assertions +@cindex Perl-style regular expressions, assertions +@cindex Perl-style regular expressions, asserting subpatterns + +An assertion is a test on the characters following or +preceding the current matching point that does not actually +consume any characters. The simple assertions coded as @code{\b}, +@code{\B}, @code{\A}, @code{\Z}, @code{\z}, @code{^} and @code{$} +are described above. More complicated assertions are coded as +subpatterns. There are two kinds: those that look ahead of the +current position in the subject string, and those that look behind it. + +@cindex Perl-style regular expressions, lookahead subpatterns +An assertion subpattern is matched in the normal way, except +that it does not cause the current matching position to be +changed. Lookahead assertions start with @code{(?=} for positive +assertions and @code{(?!} for negative assertions. For example, + +@example + \w+(?=;) +@end example + +@noindent +matches a word followed by a semicolon, but does not include +the semicolon in the match, and + +@example + foo(?!bar) +@end example + +@noindent +matches any occurrence of @samp{foo} that is not followed by +@samp{bar}. + +Note that the apparently similar pattern + +@example + (?!foo)bar +@end example + +@noindent +@cindex Perl-style regular expressions, lookbehind subpatterns +finds any occurrence of @samp{bar} even if it is preceded by +@samp{foo}, because the assertion @code{(?!foo)} is always true +when the next three characters are @samp{bar}. A lookbehind +assertion is needed to achieve this effect. +Lookbehind assertions start with @code{(?<=} for positive +assertions and @code{(?<!} for negative assertions. So, + +@example + (?<!foo)bar +@end example + +achieves the required effect of finding an occurrence of +@samp{bar} that is not preceded by @samp{foo}. The contents of a +lookbehind assertion are restricted +such that all the strings it matches must have a fixed +length. However, if there are several alternatives, they do +not all have to have the same fixed length. This is an extension +compared with Perl 5.005, which requires all branches to match +the same length of string. Thus + +@example + (?<=dogs|cats|) +@end example + +@noindent +is permitted, but the apparently equivalent regular expression + +@example + (?<!dogs?|cats?) +@end example + +@noindent +causes an error at compile time. Branches that match different +length strings are permitted only at the top level of +a lookbehind assertion: an assertion such as + +@example + (?<=ab(c|de)) +@end example + +@noindent +is not permitted, because its single top-level branch can +match two different lengths, but it is acceptable if rewritten +to use two top-level branches: + +@example + (?<=abc|abde) +@end example + +All this is required because lookbehind assertions simply +move the current position back by the alternative's fixed +width and then try to match. If there are +insufficient characters before the current position, the +match is deemed to fail. Lookbehinds, in conjunction with +non-backtracking subpatterns can be particularly useful for +matching at the ends of strings; an example is given at the end +of the section on non-backtracking subpatterns. + +Several assertions (of any sort) may occur in succession. +For example, + +@example + (?<=\d@{3@})(?<!999)foo +@end example + +@noindent +matches @samp{foo} preceded by three digits that are not @samp{999}. +Notice that each of the assertions is applied independently +at the same point in the subject string. First there is a +check that the previous three characters are all digits, and +then there is a check that the same three characters are not +@samp{999}. This pattern does not match @samp{foo} preceded by six +characters, the first of which are digits and the last three +of which are not @samp{999}. For example, it doesn't match +@samp{123abcfoo}. A pattern to do that is + +@example + (?<=\d@{3@}...)(?<!999)foo +@end example + +@noindent +This time the first assertion looks at the preceding six +characters, checking that the first three are digits, and +then the second assertion checks that the preceding three +characters are not @samp{999}. Actually, assertions can be +nested in any combination, so one can write this as + +@example + (?<=\d@{3@}(?!999)...)foo +@end example + +or + +@example + (?<=\d@{3@}...(?<!999))foo +@end example + +@noindent +both of which might be considered more readable. + +Assertion subpatterns are not capturing subpatterns, and may +not be repeated, because it makes no sense to assert the +same thing several times. If any kind of assertion contains +capturing subpatterns within it, these are counted for the +purposes of numbering the capturing subpatterns in the whole +pattern. However, substring capturing is carried out only +for positive assertions, because it does not make sense for +negative assertions. + +Assertions count towards the maximum of 200 parenthesized +subpatterns. + +@node Non-backtracking subpatterns +@appendixsec Non-backtracking subpatterns +@cindex Perl-style regular expressions, non-backtracking subpatterns + +With both maximizing and minimizing repetition, failure of +what follows normally causes the repeated item to be evaluated +again to see if a different number of repeats allows the +rest of the pattern to match. Sometimes it is useful to +prevent this, either to change the nature of the match, or +to cause it fail earlier than it otherwise might, when the +author of the pattern knows there is no point in carrying +on. + +Consider, for example, the pattern @code{\d+foo} when applied to +the subject line + +@example + 123456bar +@end example + +After matching all 6 digits and then failing to match @samp{foo}, +the normal action of the matcher is to try again with only 5 +digits matching the @code{\d+} item, and then with 4, and so on, +before ultimately failing. Non-backtracking subpatterns +provide the means for specifying that once a portion of the +pattern has matched, it is not to be re-evaluated in this way, +so the matcher would give up immediately on failing to match +@samp{foo} the first time. The notation is another kind of special +parenthesis, starting with @code{(?>} as in this example: + +@example + (?>\d+)bar +@end example + +This kind of parenthesis ``locks up'' the part of the pattern +it contains once it has matched, and a failure further into +the pattern is prevented from backtracking into it. +Backtracking past it to previous items, however, works as +normal. + +Non-backtracking subpatterns are not capturing subpatterns. Simple +cases such as the above example can be thought of as a maximizing +repeat that must swallow everything it can. So, +while both @code{\d+} and @code{\d+?} are prepared to adjust the number of +digits they match in order to make the rest of the pattern +match, @code{(?>\d+)} can only match an entire sequence of digits. + +This construction can of course contain arbitrarily complicated +subpatterns, and it can be nested. + +@cindex Perl-style regular expressions, lookbehind subpatterns +Non-backtracking subpatterns can be used in conjunction with look-behind +assertions to specify efficient matching at the end +of the subject string. Consider a simple pattern such as + +@example + abcd$ +@end example + +@noindent +when applied to a long string which does not match. Because +matching proceeds from left to right, @command{sed} will look for +each @samp{a} in the subject and then see if what follows matches +the rest of the pattern. If the pattern is specified as + +@example + ^.*abcd$ +@end example + +@noindent +the initial @code{.*} matches the entire string at first, but when +this fails (because there is no following @samp{a}), it backtracks +to match all but the last character, then all but the +last two characters, and so on. Once again the search for +@samp{a} covers the entire string, from right to left, so we are +no better off. However, if the pattern is written as + +@example + ^(?>.*)(?<=abcd) +@end example + +there can be no backtracking for the .* item; it can match +only the entire string. The subsequent lookbehind assertion +does a single test on the last four characters. If it fails, +the match fails immediately. For long strings, this approach +makes a significant difference to the processing time. + +When a pattern contains an unlimited repeat inside a subpattern +that can itself be repeated an unlimited number of +times, the use of a once-only subpattern is the only way to +avoid some failing matches taking a very long time +indeed.@footnote{Actually, the matcher embedded in @value{SSED} + tries to do something for this in the simplest cases, + like @code{([^b]*b)*}. These cases are actually quite + common: they happen for example in a regular expression + like @code{\/\*([^*]*\*)*\/} which matches C comments.} + +The pattern + +@example + (\D+|<\d+>)*[!?] +@end example + +([^0-9<]+<(\d+>)?)*[!?] + +@noindent +matches an unlimited number of substrings that either consist +of non-digits, or digits enclosed in angular brackets, followed by +an exclamation or question mark. When it matches, it runs quickly. +However, if it is applied to + +@example + aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa +@end example + +@noindent +it takes a long time before reporting failure. This is +because the string can be divided between the two repeats in +a large number of ways, and all have to be tried.@footnote{The +example used @code{[!?]} rather than a single character at the end, +because both @value{SSED} and Perl have an optimization that allows +for fast failure when a single character is used. They +remember the last single character that is required for a +match, and fail early if it is not present in the string.} + +If the pattern is changed to + +@example + ((?>\D+)|<\d+>)*[!?] +@end example + +sequences of non-digits cannot be broken, and failure happens +quickly. + +@node Conditional subpatterns +@appendixsec Conditional subpatterns +@cindex Perl-style regular expressions, conditional subpatterns + +It is possible to cause the matching process to obey a subpattern +conditionally or to choose between two alternative +subpatterns, depending on the result of an assertion, or +whether a previous capturing subpattern matched or not. The +two possible forms of conditional subpattern are + +@example + (?(@var{condition})@var{yes-pattern}) + (?(@var{condition})@var{yes-pattern}|@var{no-pattern}) +@end example + +If the condition is satisfied, the yes-pattern is used; otherwise +the no-pattern (if present) is used. If there are more than two +alternatives in the subpattern, a compile-time error occurs. + +There are two kinds of condition. If the text between the +parentheses consists of a sequence of digits, the condition +is satisfied if the capturing subpattern of that number has +previously matched. The number must be greater than zero. +Consider the following pattern, which contains non-significant +white space to make it more readable (assume the @code{X} modifier) +and to divide it into three parts for ease of discussion: + +@example + ( \( )? [^()]+ (?(1) \) ) +@end example + +The first part matches an optional opening parenthesis, and +if that character is present, sets it as the first captured +substring. The second part matches one or more characters +that are not parentheses. The third part is a conditional +subpattern that tests whether the first set of parentheses +matched or not. If they did, that is, if subject started +with an opening parenthesis, the condition is true, and so +the yes-pattern is executed and a closing parenthesis is +required. Otherwise, since no-pattern is not present, the +subpattern matches nothing. In other words, this pattern +matches a sequence of non-parentheses, optionally enclosed +in parentheses. + +@cindex Perl-style regular expressions, lookahead subpatterns +If the condition is not a sequence of digits, it must be an +assertion. This may be a positive or negative lookahead or +lookbehind assertion. Consider this pattern, again containing +non-significant white space, and with the two alternatives +on the second line: + +@example + (?(?=...[a-z]) + \d\d-[a-z]@{3@}-\d\d | + \d\d-\d\d-\d\d ) +@end example + +The condition is a positive lookahead assertion that matches +a letter that is three characters away from the current point. +If a letter is found, the subject is matched against the first +alternative @samp{@var{dd}-@var{aaa}-@var{dd}} (where @var{aaa} are +letters and @var{dd} are digits); otherwise it is matched against +the second alternative, @samp{@var{dd}-@var{dd}-@var{dd}}. + + +@node Recursive patterns +@appendixsec Recursive patterns +@cindex Perl-style regular expressions, recursive patterns +@cindex Perl-style regular expressions, recursion + +Consider the problem of matching a string in parentheses, +allowing for unlimited nested parentheses. Without the use +of recursion, the best that can be done is to use a pattern +that matches up to some fixed depth of nesting. It is not +possible to handle an arbitrary nesting depth. Perl 5.6 has +provided an experimental facility that allows regular +expressions to recurse (amongst other things). It does this +by interpolating Perl code in the expression at run time, +and the code can refer to the expression itself. A Perl pattern +tern to solve the parentheses problem can be created like +this: + +@example + $re = qr@{\( (?: (?>[^()]+) | (?p@{$re@}) )* \)@}x; +@end example + +The @code{(?p@{...@})} item interpolates Perl code at run time, +and in this case refers recursively to the pattern in which it +appears. Obviously, @command{sed} cannot support the interpolation of +Perl code. Instead, the special item @code{(?R)} is provided for +the specific case of recursion. This pattern solves the +parentheses problem (assume the @code{X} modifier option is used +so that white space is ignored): + +@example + \( ( (?>[^()]+) | (?R) )* \) +@end example + +First it matches an opening parenthesis. Then it matches any +number of substrings which can either be a sequence of +non-parentheses, or a recursive match of the pattern itself +(i.e. a correctly parenthesized substring). Finally there is +a closing parenthesis. + +This particular example pattern contains nested unlimited +repeats, and so the use of a non-backtracking subpattern for +matching strings of non-parentheses is important when applying +the pattern to strings that do not match. For example, when +it is applied to + +@example + (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa() +@end example + +it yields a ``no match'' response quickly. However, if a +standard backtracking subpattern is not used, the match runs +for a very long time indeed because there are so many different +ways the @code{+} and @code{*} repeats can carve up the subject, +and all have to be tested before failure can be reported. + +The values set for any capturing subpatterns are those from +the outermost level of the recursion at which the subpattern +value is set. If the pattern above is matched against + +@example + (ab(cd)ef) +@end example + +@noindent +the value for the capturing parentheses is @samp{ef}, which is +the last value taken on at the top level. + +@node Comments +@appendixsec Comments +@cindex Perl-style regular expressions, comments + +The sequence (?# marks the start of a comment which continues +ues up to the next closing parenthesis. Nested parentheses +are not permitted. The characters that make up a comment +play no part in the pattern matching at all. + +@cindex Perl-style regular expressions, extended +If the @code{X} modifier option is used, an unescaped @code{#} character +outside a character class introduces a comment that continues +up to the next newline character in the pattern. +@end ifset + + +@page +@node Concept Index +@unnumbered Concept Index + +This is a general index of all issues discussed in this manual, with the +exception of the @command{sed} commands and command-line options. + +@printindex cp + +@page +@node Command and Option Index +@unnumbered Command and Option Index + +This is an alphabetical list of all @command{sed} commands and command-line +options. + +@printindex fn + +@contents +@bye + +@c XXX FIXME: the term "cycle" is never defined... |