1 files changed, 313 insertions, 0 deletions
diff --git a/src/sed/doc/sed.x b/src/sed/doc/sed.x
new file mode 100644
index 0000000..10fe1ee
--- /dev/null
+++ b/src/sed/doc/sed.x
@@ -0,0 +1,313 @@
+.SH NAME
+sed \- a Stream EDitor
+.SH SYNOPSIS
+.nf
+sed [-V] [--version] [--help] [-n] [--quiet] [--silent]
+    [-l N] [--line-length=N] [-u] [--unbuffered]
+    [-r] [--regexp-extended] 
+    [-e script] [--expression=script]
+    [-f script-file] [--file=script-file]
+    [script-if-no-other-script]
+    [file...]
+.fi
+[DESCRIPTION]
+.ds sd \fIsed\fP
+.ds Sd \fISed\fP
+\*(Sd is a stream editor.
+A stream editor is used to perform basic text
+transformations on an input stream
+(a file or input from a pipeline).
+While in some ways similar to an editor which
+permits scripted edits (such as \fIed\fP),
+\*(sd works by making only one pass over the
+input(s), and is consequently more efficient.
+But it is \*(sd's ability to filter text in a pipeline
+which particularly distinguishes it from other types of
+editors.
+
+[COMMAND SYNOPSIS]
+This is just a brief synopsis of \*(sd commands to serve as
+a reminder to those who already know \*(sd;
+other documentation (such as the texinfo document)
+must be consulted for fuller descriptions.
+.SS
+Zero-address ``commands''
+.TP
+.RI :\  label
+Label for
+.B b
+and
+.B t
+commands.
+.TP
+.RI # comment
+The comment extends until the next newline (or the end of a
+.B -e
+script fragment).
+.TP
+}
+The closing bracket of a { } block.
+.SS
+Zero- or One- address commands
+.TP
+=
+Print the current line number.
+.TP
+a \e
+.TP
+.I text
+Append
+.IR text ,
+which has each embedded newline preceded by a backslash.
+.TP
+i \e
+.TP
+.I text
+Insert
+.IR text ,
+which has each embedded newline preceded by a backslash.
+.TP
+q
+Immediately quit the \*(sd script without processing
+any more input,
+except that if auto-print is not disabled
+the current pattern space will be printed.
+.TP
+Q
+Immediately quit the \*(sd script without processing
+any more input.
+.TP
+.RI r\  filename
+Append text read from
+.IR filename .
+.TP
+.RI R\  filename
+Append a line read from
+.IR filename .
+.SS
+Commands which accept address ranges
+.TP
+{
+Begin a block of commands (end with a }).
+.TP
+.RI b\  label
+Branch to
+.IR label ;
+if
+.I label
+is omitted, branch to end of script.
+.TP
+.RI t\  label
+If a s/// has done a successful substitution since the
+last input line was read and since the last t or T
+command, then branch to
+.IR label ;
+if
+.I label
+is omitted, branch to end of script.
+.TP
+.RI T\  label
+If no s/// has done a successful substitution since the
+last input line was read and since the last t or T
+command, then branch to
+.IR label ;
+if
+.I label
+is omitted, branch to end of script.
+.TP
+c \e
+.TP
+.I text
+Replace the selected lines with
+.IR text ,
+which has each embedded newline preceded by a backslash.
+.TP
+d
+Delete pattern space.
+Start next cycle.
+.TP
+D
+Delete up to the first embedded newline in the pattern space.
+Start next cycle, but skip reading from the input
+if there is still data in the pattern space.
+.TP
+h H
+Copy/append pattern space to hold space.
+.TP
+g G
+Copy/append hold space to pattern space.
+.TP
+x
+Exchange the contents of the hold and pattern spaces.
+.TP
+l
+List out the current line in a ``visually unambiguous'' form.
+.TP
+n N
+Read/append the next line of input into the pattern space.
+.TP
+p
+Print the current pattern space.
+.TP
+P
+Print up to the first embedded newline of the current pattern space.
+.TP
+.RI s/ regexp / replacement /
+Attempt to match
+.I regexp
+against the pattern space.
+If successful, replace that portion matched
+with
+.IR replacement .
+The
+.I replacement
+may contain the special character
+.B &
+to refer to that portion of the pattern space which matched,
+and the special escapes \e1 through \e9 to refer to the
+corresponding matching sub-expressions in the
+.IR regexp .
+.TP
+.RI w\  filename
+Write the current pattern space to
+.IR filename .
+.TP
+.RI W\  filename
+Write the first line of the current pattern space to
+.IR filename .
+.TP
+.RI y/ source / dest /
+Transliterate the characters in the pattern space which appear in
+.I source
+to the corresponding character in
+.IR dest .
+.SH
+Addresses
+\*(Sd commands can be given with no addresses, in which
+case the command will be executed for all input lines;
+with one address, in which case the command will only be executed
+for input lines which match that address; or with two
+addresses, in which case the command will be executed
+for all input lines which match the inclusive range of
+lines starting from the first address and continuing to
+the second address.
+Three things to note about address ranges:
+the syntax is
+.IR addr1 , addr2
+(i.e., the addresses are separated by a comma);
+the line which
+.I addr1
+matched will always be accepted,
+even if
+.I addr2
+selects an earlier line;
+and if
+.I addr2
+is a
+.IR regexp ,
+it will not be tested against the line that
+.I addr1
+matched.
+.PP
+After the address (or address-range),
+and before the command, a
+.B !
+may be inserted,
+which specifies that the command shall only be
+executed if the address (or address-range) does
+.B not
+match.
+.PP
+The following address types are supported:
+.TP
+.I number
+Match only the specified line
+.IR number .
+.TP
+.IR first ~ step
+Match every
+.IR step 'th
+line starting with line
+.IR first .
+For example, ``sed -n 1~2p'' will print all the odd-numbered lines in
+the input stream, and the address 2~5 will match every fifth line,
+starting with the second. (This is an extension.)
+.TP
+$
+Match the last line.
+.TP
+.RI / regexp /
+Match lines matching the regular expression
+.IR regexp .
+.TP
+.BI \fR\e\fPc regexp c
+Match lines matching the regular expression
+.IR regexp .
+The
+.B c
+may be any character.
+.PP
+GNU \*(sd also supports some special 2-address forms:
+.TP
+.RI 0, addr2
+Start out in "matched first address" state, until
+.I addr2
+is found.
+This is similar to
+.RI 1, addr2 ,
+except that if
+.I addr2
+matches the very first line of input the
+.RI 0, addr2
+form will be at the end of its range, whereas the
+.RI 1, addr2
+form will still be at the beginning of its range.
+.TP
+.IR addr1 ,+ N
+Will match
+.I addr1
+and the
+.I N
+lines following
+.IR addr1 .
+.TP
+.IR addr1 ,~ N
+Will match
+.I addr1
+and the lines following
+.I addr1
+until the next line whose input line number is a multiple of
+.IR N .
+
+[REGULAR EXPRESSIONS]
+POSIX.2 BREs
+.I should
+be supported, but they aren't completely because of performance
+problems.
+The
+.B \en
+sequence in a regular expression matches the newline character,
+and similarly for
+.BR \ea ,
+.BR \et ,
+and other sequences.
+
+[SEE ALSO]
+.BR awk (1),
+.BR ed (1),
+.BR grep (1),
+.BR tr (1),
+.BR perlre (1),
+sed.info,
+any of various books on \*(sd,
+.na
+the \*(sd FAQ (http://sed.sf.net/grabbag/tutorials/sedfaq.txt),
+http://sed.sf.net/grabbag/.
+
+[BUGS]
+.PP
+E-mail bug reports to
+.BR bonzini@gnu.org .
+Be sure to include the word ``sed'' somewhere in the ``Subject:'' field.
+Also, please include the output of ``sed --version'' in the body
+of your report if at all possible.