diff options
Diffstat (limited to 'docs/doxygen.conf')
| -rw-r--r-- | docs/doxygen.conf | 1356 |
1 files changed, 1356 insertions, 0 deletions
diff --git a/docs/doxygen.conf b/docs/doxygen.conf new file mode 100644 index 0000000..83f3fe2 --- /dev/null +++ b/docs/doxygen.conf @@ -0,0 +1,1356 @@ +# Doxyfile 1.5.5 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = HTP + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = 0.5 + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doxygen/ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, +# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, +# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, +# and Ukrainian. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ../htp + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = *.c *.h + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentstion. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = ./ + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = letter + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = NO + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = NO + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = NO + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = NO + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = NO + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = NO + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is enabled by default, which results in a transparent +# background. Warning: Depending on the platform used, enabling this option +# may lead to badly anti-aliased labels on the edges of a graph (i.e. they +# become hard to read). + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO |