diff options
Diffstat (limited to 'chart2/source/controller/chartapiwrapper/DiagramWrapper.cxx')
| -rw-r--r-- | chart2/source/controller/chartapiwrapper/DiagramWrapper.cxx | 1898 |
1 files changed, 1898 insertions, 0 deletions
diff --git a/chart2/source/controller/chartapiwrapper/DiagramWrapper.cxx b/chart2/source/controller/chartapiwrapper/DiagramWrapper.cxx new file mode 100644 index 0000000000..711d3017a8 --- /dev/null +++ b/chart2/source/controller/chartapiwrapper/DiagramWrapper.cxx @@ -0,0 +1,1898 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "DiagramWrapper.hxx" +#include <servicenames_charttypes.hxx> +#include "DataSeriesPointWrapper.hxx" +#include <DataSeriesProperties.hxx> +#include "AxisWrapper.hxx" +#include "Chart2ModelContact.hxx" +#include "WallFloorWrapper.hxx" +#include "MinMaxLineWrapper.hxx" +#include "UpDownBarWrapper.hxx" +#include <Diagram.hxx> +#include <DiagramHelper.hxx> +#include <DataSourceHelper.hxx> +#include <ChartModelHelper.hxx> +#include <ChartType.hxx> +#include <DataSeries.hxx> +#include <WrappedIgnoreProperty.hxx> +#include "WrappedAxisAndGridExistenceProperties.hxx" +#include "WrappedStatisticProperties.hxx" +#include "WrappedSymbolProperties.hxx" +#include "WrappedDataCaptionProperties.hxx" +#include "WrappedSplineProperties.hxx" +#include "WrappedStockProperties.hxx" +#include "WrappedSceneProperty.hxx" +#include <ControllerLockGuard.hxx> +#include <DisposeHelper.hxx> +#include "WrappedAutomaticPositionProperties.hxx" +#include <CommonConverters.hxx> +#include <unonames.hxx> +#include <comphelper/sequence.hxx> +#include <cppuhelper/supportsservice.hxx> +#include <ChartTypeManager.hxx> +#include <ChartTypeTemplate.hxx> + +#include <com/sun/star/beans/PropertyAttribute.hpp> +#include <com/sun/star/chart/ChartDataRowSource.hpp> +#include <com/sun/star/chart2/RelativeSize.hpp> +#include <com/sun/star/chart2/RelativePosition.hpp> +#include <com/sun/star/chart/ChartSolidType.hpp> +#include <com/sun/star/lang/IndexOutOfBoundsException.hpp> + +#include <LinePropertiesHelper.hxx> +#include <FillProperties.hxx> +#include <UserDefinedProperties.hxx> +#include <SceneProperties.hxx> + +#include <algorithm> +#include <map> +#include <com/sun/star/lang/XServiceName.hpp> +#include <com/sun/star/util/XRefreshable.hpp> +#include <comphelper/diagnose_ex.hxx> +#include <o3tl/string_view.hxx> +#include <utility> + +using namespace ::com::sun::star; +using namespace ::chart::wrapper; +using namespace ::chart::DataSeriesProperties; + +using ::com::sun::star::uno::Reference; +using ::com::sun::star::uno::Any; +using ::com::sun::star::uno::Sequence; +using ::com::sun::star::beans::Property; +using ::com::sun::star::chart::XAxis; + +namespace +{ + +enum +{ + PROP_DIAGRAM_ATTRIBUTED_DATA_POINTS, + PROP_DIAGRAM_PERCENT_STACKED, + PROP_DIAGRAM_STACKED, + PROP_DIAGRAM_THREE_D, + PROP_DIAGRAM_SOLIDTYPE, + PROP_DIAGRAM_DEEP, + PROP_DIAGRAM_VERTICAL, + PROP_DIAGRAM_NUMBER_OF_LINES, + PROP_DIAGRAM_STACKED_BARS_CONNECTED, + PROP_DIAGRAM_DATAROW_SOURCE, + + PROP_DIAGRAM_GROUP_BARS_PER_AXIS, + PROP_DIAGRAM_INCLUDE_HIDDEN_CELLS, + + PROP_DIAGRAM_SORT_BY_X_VALUES, + + PROP_DIAGRAM_STARTING_ANGLE, + + PROP_DIAGRAM_RIGHT_ANGLED_AXES, + PROP_DIAGRAM_PERSPECTIVE, + PROP_DIAGRAM_ROTATION_HORIZONTAL, + PROP_DIAGRAM_ROTATION_VERTICAL, + + PROP_DIAGRAM_MISSING_VALUE_TREATMENT, + + PROP_DIAGRAM_HAS_X_AXIS, + PROP_DIAGRAM_HAS_X_AXIS_DESCR, + PROP_DIAGRAM_HAS_X_AXIS_TITLE, + PROP_DIAGRAM_HAS_X_AXIS_GRID, + PROP_DIAGRAM_HAS_X_AXIS_HELP_GRID, + + PROP_DIAGRAM_HAS_Y_AXIS, + PROP_DIAGRAM_HAS_Y_AXIS_DESCR, + PROP_DIAGRAM_HAS_Y_AXIS_TITLE, + PROP_DIAGRAM_HAS_Y_AXIS_GRID, + PROP_DIAGRAM_HAS_Y_AXIS_HELP_GRID, + + PROP_DIAGRAM_HAS_Z_AXIS, + PROP_DIAGRAM_HAS_Z_AXIS_DESCR, + PROP_DIAGRAM_HAS_Z_AXIS_TITLE, + PROP_DIAGRAM_HAS_Z_AXIS_GRID, + PROP_DIAGRAM_HAS_Z_AXIS_HELP_GRID, + + PROP_DIAGRAM_HAS_SECOND_X_AXIS, + PROP_DIAGRAM_HAS_SECOND_X_AXIS_DESCR, + + PROP_DIAGRAM_HAS_SECOND_Y_AXIS, + PROP_DIAGRAM_HAS_SECOND_Y_AXIS_DESCR, + + PROP_DIAGRAM_HAS_SECOND_X_AXIS_TITLE, + PROP_DIAGRAM_HAS_SECOND_Y_AXIS_TITLE, + + PROP_DIAGRAM_AUTOMATIC_SIZE, + PROP_DIAGRAM_EXTERNALDATA +}; + +void lcl_AddPropertiesToVector( + std::vector< Property > & rOutProperties ) +{ + rOutProperties.emplace_back( "AttributedDataPoints", + PROP_DIAGRAM_ATTRIBUTED_DATA_POINTS, + cppu::UnoType<uno::Sequence< uno::Sequence< sal_Int32 > >>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEVOID ); + + // see com.sun.star.chart.StackableDiagram + rOutProperties.emplace_back( "Percent", + PROP_DIAGRAM_PERCENT_STACKED, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "Stacked", + PROP_DIAGRAM_STACKED, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "Dim3D", + PROP_DIAGRAM_THREE_D, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // see com.sun.star.chart.Chart3DBarProperties + rOutProperties.emplace_back( "SolidType", + PROP_DIAGRAM_SOLIDTYPE, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // see com.sun.star.chart.BarDiagram + rOutProperties.emplace_back( "Deep", + PROP_DIAGRAM_DEEP, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "Vertical", + PROP_DIAGRAM_VERTICAL, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "NumberOfLines", + PROP_DIAGRAM_NUMBER_OF_LINES, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "StackedBarsConnected", + PROP_DIAGRAM_STACKED_BARS_CONNECTED, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "DataRowSource", + PROP_DIAGRAM_DATAROW_SOURCE, + cppu::UnoType<css::chart::ChartDataRowSource>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "GroupBarsPerAxis", + PROP_DIAGRAM_GROUP_BARS_PER_AXIS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "IncludeHiddenCells", + PROP_DIAGRAM_INCLUDE_HIDDEN_CELLS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + //new for XY charts + rOutProperties.emplace_back( CHART_UNONAME_SORT_BY_XVALUES, + PROP_DIAGRAM_SORT_BY_X_VALUES, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + //for pie and donut charts + rOutProperties.emplace_back( "StartingAngle", + PROP_DIAGRAM_STARTING_ANGLE, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + //new for 3D charts + rOutProperties.emplace_back( "RightAngledAxes", + PROP_DIAGRAM_RIGHT_ANGLED_AXES, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "Perspective", + PROP_DIAGRAM_PERSPECTIVE, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::MAYBEVOID ); + + rOutProperties.emplace_back( "RotationHorizontal", + PROP_DIAGRAM_ROTATION_HORIZONTAL, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::MAYBEVOID ); + + rOutProperties.emplace_back( "RotationVertical", + PROP_DIAGRAM_ROTATION_VERTICAL, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::MAYBEVOID ); + + // XAxisXSupplier + rOutProperties.emplace_back( "HasXAxis", + PROP_DIAGRAM_HAS_X_AXIS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasXAxisDescription", + PROP_DIAGRAM_HAS_X_AXIS_DESCR, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasXAxisTitle", + PROP_DIAGRAM_HAS_X_AXIS_TITLE, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasXAxisGrid", + PROP_DIAGRAM_HAS_X_AXIS_GRID, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasXAxisHelpGrid", + PROP_DIAGRAM_HAS_X_AXIS_HELP_GRID, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // XAxisYSupplier + rOutProperties.emplace_back( "HasYAxis", + PROP_DIAGRAM_HAS_Y_AXIS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasYAxisDescription", + PROP_DIAGRAM_HAS_Y_AXIS_DESCR, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasYAxisTitle", + PROP_DIAGRAM_HAS_Y_AXIS_TITLE, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasYAxisGrid", + PROP_DIAGRAM_HAS_Y_AXIS_GRID, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasYAxisHelpGrid", + PROP_DIAGRAM_HAS_Y_AXIS_HELP_GRID, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // XAxisZSupplier + rOutProperties.emplace_back( "HasZAxis", + PROP_DIAGRAM_HAS_Z_AXIS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasZAxisDescription", + PROP_DIAGRAM_HAS_Z_AXIS_DESCR, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasZAxisTitle", + PROP_DIAGRAM_HAS_Z_AXIS_TITLE, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasZAxisGrid", + PROP_DIAGRAM_HAS_Z_AXIS_GRID, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasZAxisHelpGrid", + PROP_DIAGRAM_HAS_Z_AXIS_HELP_GRID, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // XTwoAxisXSupplier + rOutProperties.emplace_back( "HasSecondaryXAxis", + PROP_DIAGRAM_HAS_SECOND_X_AXIS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasSecondaryXAxisDescription", + PROP_DIAGRAM_HAS_SECOND_X_AXIS_DESCR, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // XTwoAxisYSupplier + rOutProperties.emplace_back( "HasSecondaryYAxis", + PROP_DIAGRAM_HAS_SECOND_Y_AXIS, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasSecondaryYAxisDescription", + PROP_DIAGRAM_HAS_SECOND_Y_AXIS_DESCR, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + // XSecondAxisTitleSupplier + rOutProperties.emplace_back( "HasSecondaryXAxisTitle", + PROP_DIAGRAM_HAS_SECOND_X_AXIS_TITLE, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + rOutProperties.emplace_back( "HasSecondaryYAxisTitle", + PROP_DIAGRAM_HAS_SECOND_Y_AXIS_TITLE, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "MissingValueTreatment", + PROP_DIAGRAM_MISSING_VALUE_TREATMENT, + cppu::UnoType<sal_Int32>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEVOID ); + + rOutProperties.emplace_back( "AutomaticSize", + PROP_DIAGRAM_AUTOMATIC_SIZE, + cppu::UnoType<bool>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEDEFAULT ); + + rOutProperties.emplace_back( "ExternalData", + PROP_DIAGRAM_EXTERNALDATA, + cppu::UnoType<OUString>::get(), + beans::PropertyAttribute::BOUND + | beans::PropertyAttribute::MAYBEVOID ); +} + +const Sequence< Property >& StaticDiagramWrapperPropertyArray() +{ + static Sequence< Property > aPropSeq = []() + { + std::vector< css::beans::Property > aProperties; + lcl_AddPropertiesToVector( aProperties ); + ::chart::LinePropertiesHelper::AddPropertiesToVector( aProperties ); + ::chart::FillProperties::AddPropertiesToVector( aProperties ); + ::chart::UserDefinedProperties::AddPropertiesToVector( aProperties ); + ::chart::SceneProperties::AddPropertiesToVector( aProperties ); + WrappedStatisticProperties::addProperties( aProperties ); + WrappedSymbolProperties::addProperties( aProperties ); + WrappedDataCaptionProperties::addProperties( aProperties ); + WrappedSplineProperties::addProperties( aProperties ); + WrappedStockProperties::addProperties( aProperties ); + WrappedAutomaticPositionProperties::addProperties( aProperties ); + + std::sort( aProperties.begin(), aProperties.end(), + ::chart::PropertyNameLess() ); + + return comphelper::containerToSequence( aProperties ); + }(); + return aPropSeq; +}; + +bool lcl_isXYChart( const rtl::Reference< ::chart::Diagram >& xDiagram ) +{ + bool bRet = false; + rtl::Reference< ::chart::ChartType > xChartType( xDiagram->getChartTypeByIndex( 0 ) ); + if( xChartType.is() ) + { + OUString aChartType( xChartType->getChartType() ); + if( aChartType.equalsIgnoreAsciiCase(CHART2_SERVICE_NAME_CHARTTYPE_SCATTER) ) + bRet = true; + } + return bRet; +} + +sal_Int32 lcl_getNewAPIIndexForOldAPIIndex( + sal_Int32 nOldAPIIndex + , const rtl::Reference< ::chart::Diagram >& xDiagram ) +{ + sal_Int32 nNewAPIIndex = nOldAPIIndex; + + if( lcl_isXYChart( xDiagram ) ) + { + if( nNewAPIIndex >= 1 ) + nNewAPIIndex -= 1; + } + + std::vector< rtl::Reference< ::chart::DataSeries > > aSeriesList = + xDiagram->getDataSeries(); + if( nNewAPIIndex >= static_cast<sal_Int32>(aSeriesList.size()) ) + nNewAPIIndex = -1; + + return nNewAPIIndex; +} + +OUString lcl_getDiagramType( std::u16string_view rTemplateServiceName ) +{ + static constexpr OUString aPrefix(u"com.sun.star.chart2.template."_ustr); + + if( o3tl::starts_with(rTemplateServiceName, aPrefix) ) + { + const std::u16string_view aName( rTemplateServiceName.substr( aPrefix.getLength())); + + // "Area" "StackedArea" "PercentStackedArea" "ThreeDArea" + // "StackedThreeDArea" "PercentStackedThreeDArea" + if( aName.find( u"Area" ) != std::u16string_view::npos ) + return "com.sun.star.chart.AreaDiagram"; + + // "Pie" "PieAllExploded" "ThreeDPie" "ThreeDPieAllExploded" + if( aName.find( u"Pie" ) != std::u16string_view::npos ) + return "com.sun.star.chart.PieDiagram"; + + // "Column" "StackedColumn" "PercentStackedColumn" "ThreeDColumnDeep" + // "ThreeDColumnFlat" "StackedThreeDColumnFlat" + // "PercentStackedThreeDColumnFlat" "Bar" "StackedBar" + // "PercentStackedBar" "ThreeDBarDeep" "ThreeDBarFlat" + // "StackedThreeDBarFlat" "PercentStackedThreeDBarFlat" "ColumnWithLine" + // "StackedColumnWithLine" + if( aName.find( u"Column" ) != std::u16string_view::npos || aName.find( u"Bar" ) != std::u16string_view::npos ) + return "com.sun.star.chart.BarDiagram"; + + // "Donut" "DonutAllExploded" "ThreeDDonut" "ThreeDDonutAllExploded" + if( aName.find( u"Donut" ) != std::u16string_view::npos ) + return "com.sun.star.chart.DonutDiagram"; + + // "ScatterLineSymbol" "ScatterLine" "ScatterSymbol" "ThreeDScatter" + if( aName.find( u"Scatter" ) != std::u16string_view::npos ) + return "com.sun.star.chart.XYDiagram"; + + // "FilledNet" "StackedFilledNet" "PercentStackedFilledNet" + if( aName.find( u"FilledNet" ) != std::u16string_view::npos ) + return "com.sun.star.chart.FilledNetDiagram"; + + // "Net" "NetSymbol" "NetLine" "StackedNet" "StackedNetSymbol" + // "StackedNetLine" "PercentStackedNet" "PercentStackedNetSymbol" + // "PercentStackedNetLine" + if( aName.find( u"Net" ) != std::u16string_view::npos ) + return "com.sun.star.chart.NetDiagram"; + + // "StockLowHighClose" "StockOpenLowHighClose" "StockVolumeLowHighClose" + // "StockVolumeOpenLowHighClose" + if( aName.find( u"Stock" ) != std::u16string_view::npos ) + return "com.sun.star.chart.StockDiagram"; + + if( aName.find( u"Bubble" ) != std::u16string_view::npos ) + return "com.sun.star.chart.BubbleDiagram"; + + // Note: this must be checked after Bar, Net and Scatter + + // "Symbol" "StackedSymbol" "PercentStackedSymbol" "Line" "StackedLine" + // "PercentStackedLine" "LineSymbol" "StackedLineSymbol" + // "PercentStackedLineSymbol" "ThreeDLine" "StackedThreeDLine" + // "PercentStackedThreeDLine" "ThreeDLineDeep" + if( aName.find( u"Line" ) != std::u16string_view::npos || aName.find( u"Symbol" ) != std::u16string_view::npos ) + return "com.sun.star.chart.LineDiagram"; + + OSL_FAIL( "unknown template" ); + } + + return OUString(); +} + +typedef std::map< OUString, OUString > tMakeStringStringMap; + +const tMakeStringStringMap& lcl_getChartTypeNameMap() +{ + static tMakeStringStringMap g_aChartTypeNameMap{ + {"com.sun.star.chart2.LineChartType", "com.sun.star.chart.LineDiagram"}, + {"com.sun.star.chart2.AreaChartType", "com.sun.star.chart.AreaDiagram"}, + {"com.sun.star.chart2.ColumnChartType", "com.sun.star.chart.BarDiagram"}, + {"com.sun.star.chart2.PieChartType", "com.sun.star.chart.PieDiagram"}, + {"com.sun.star.chart2.DonutChartType", "com.sun.star.chart.DonutDiagram"}, + {"com.sun.star.chart2.ScatterChartType", "com.sun.star.chart.XYDiagram"}, + {"com.sun.star.chart2.FilledNetChartType", "com.sun.star.chart.FilledNetDiagram"}, + {"com.sun.star.chart2.NetChartType", "com.sun.star.chart.NetDiagram"}, + {"com.sun.star.chart2.CandleStickChartType", "com.sun.star.chart.StockDiagram"}, + {"com.sun.star.chart2.BubbleChartType", "com.sun.star.chart.BubbleDiagram"} + }; + return g_aChartTypeNameMap; +} + +OUString lcl_getOldChartTypeName( const OUString & rNewChartTypeName ) +{ + OUString aOld(rNewChartTypeName); + + const tMakeStringStringMap& rMap = lcl_getChartTypeNameMap(); + tMakeStringStringMap::const_iterator aIt( rMap.find( rNewChartTypeName )); + if( aIt != rMap.end()) + { + aOld = aIt->second; + } + return aOld; +} + +} // anonymous namespace + +namespace chart::wrapper +{ + +DiagramWrapper::DiagramWrapper(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : m_spChart2ModelContact(std::move(spChart2ModelContact)) +{ +} + +DiagramWrapper::~DiagramWrapper() +{} + +// ____ XDiagram ____ +OUString SAL_CALL DiagramWrapper::getDiagramType() +{ + OUString aRet; + + rtl::Reference< ChartModel > xChartDoc( m_spChart2ModelContact->getDocumentModel() ); + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( xChartDoc.is() && xDiagram.is() ) + { + Reference< beans::XPropertySet > xChartDocProp( static_cast<cppu::OWeakObject*>(xChartDoc.get()), uno::UNO_QUERY ); + if( xChartDocProp.is() ) + { + uno::Reference< util::XRefreshable > xAddIn; + if( xChartDocProp->getPropertyValue( "AddIn" ) >>= xAddIn ) + { + uno::Reference< lang::XServiceName > xServiceName( xAddIn, uno::UNO_QUERY ); + if( xServiceName.is()) + return xServiceName->getServiceName(); + } + } + + rtl::Reference< ::chart::ChartTypeManager > xChartTypeManager = xChartDoc->getTypeManager(); + Diagram::tTemplateWithServiceName aTemplateAndService = + xDiagram->getTemplate( xChartTypeManager ); + + aRet = lcl_getDiagramType( aTemplateAndService.sServiceName ); + } + + if( !aRet.isEmpty()) + return aRet; + + // none of the standard templates matched + // use first chart type + if (xDiagram) + { + rtl::Reference< ChartType > xChartType( xDiagram->getChartTypeByIndex( 0 ) ); + if( xChartType.is() ) + { + aRet = xChartType->getChartType(); + if( !aRet.isEmpty() ) + aRet = lcl_getOldChartTypeName( aRet ); + } + } + if( aRet.isEmpty()) + aRet = "com.sun.star.chart.BarDiagram"; + + return aRet; +} + +Reference< + beans::XPropertySet > SAL_CALL DiagramWrapper::getDataRowProperties( sal_Int32 nRow ) +{ + if( nRow < 0 ) + throw lang::IndexOutOfBoundsException("DataSeries index invalid", + static_cast< ::cppu::OWeakObject * >( this )); + + sal_Int32 nNewAPIIndex = lcl_getNewAPIIndexForOldAPIIndex( nRow, m_spChart2ModelContact->getDiagram() ); + if( nNewAPIIndex < 0 ) + throw lang::IndexOutOfBoundsException("DataSeries index invalid", + static_cast< ::cppu::OWeakObject * >( this )); + + Reference< beans::XPropertySet > xRet( new DataSeriesPointWrapper( + DataSeriesPointWrapper::DATA_SERIES, nNewAPIIndex, 0, m_spChart2ModelContact ) ); + return xRet; +} + +Reference< + beans::XPropertySet > SAL_CALL DiagramWrapper::getDataPointProperties( sal_Int32 nCol, sal_Int32 nRow ) +{ + if( nCol < 0 || nRow < 0 ) + throw lang::IndexOutOfBoundsException("DataSeries index invalid", + static_cast< ::cppu::OWeakObject * >( this )); + + sal_Int32 nNewAPIIndex = lcl_getNewAPIIndexForOldAPIIndex( nRow, m_spChart2ModelContact->getDiagram() ); + if( nNewAPIIndex < 0 ) + throw lang::IndexOutOfBoundsException("DataSeries index invalid", + static_cast< ::cppu::OWeakObject * >( this )); + + //todo: check borders of point index + + Reference< beans::XPropertySet > xRet( new DataSeriesPointWrapper( + DataSeriesPointWrapper::DATA_POINT, nNewAPIIndex, nCol, m_spChart2ModelContact ) ); + + return xRet; +} + +// ____ XShape (base of XDiagram) ____ +awt::Point SAL_CALL DiagramWrapper::getPosition() +{ + awt::Point aPosition = ToPoint( m_spChart2ModelContact->GetDiagramRectangleIncludingAxes() ); + return aPosition; +} + +void SAL_CALL DiagramWrapper::setPosition( const awt::Point& aPosition ) +{ + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + Reference< beans::XPropertySet > xProp( getInnerPropertySet() ); + if( !xProp.is() ) + return; + + awt::Size aPageSize( m_spChart2ModelContact->GetPageSize() ); + + chart2::RelativePosition aRelativePosition; + aRelativePosition.Anchor = drawing::Alignment_TOP_LEFT; + aRelativePosition.Primary = double(aPosition.X)/double(aPageSize.Width); + aRelativePosition.Secondary = double(aPosition.Y)/double(aPageSize.Height); + if( aRelativePosition.Primary < 0 || aRelativePosition.Secondary < 0 || aRelativePosition.Primary > 1 || aRelativePosition.Secondary > 1 ) + { + OSL_FAIL("DiagramWrapper::setPosition called with a position out of range -> automatic values are taken instead" ); + uno::Any aEmpty; + xProp->setPropertyValue( "RelativePosition", aEmpty ); + return; + } + xProp->setPropertyValue( "RelativePosition", uno::Any(aRelativePosition) ); + xProp->setPropertyValue( "PosSizeExcludeAxes", uno::Any(false) ); +} + +awt::Size SAL_CALL DiagramWrapper::getSize() +{ + awt::Size aSize = ToSize( m_spChart2ModelContact->GetDiagramRectangleIncludingAxes() ); + return aSize; +} + +void SAL_CALL DiagramWrapper::setSize( const awt::Size& aSize ) +{ + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + Reference< beans::XPropertySet > xProp( getInnerPropertySet() ); + if( !xProp.is() ) + return; + + awt::Size aPageSize( m_spChart2ModelContact->GetPageSize() ); + + chart2::RelativeSize aRelativeSize; + aRelativeSize.Primary = double(aSize.Width)/double(aPageSize.Width); + aRelativeSize.Secondary = double(aSize.Height)/double(aPageSize.Height); + + if( aRelativeSize.Primary > 1 || aRelativeSize.Secondary > 1 ) + { + OSL_FAIL("DiagramWrapper::setSize called with sizes bigger than page -> automatic values are taken instead" ); + uno::Any aEmpty; + xProp->setPropertyValue( "RelativeSize", aEmpty ); + return; + } + + xProp->setPropertyValue( "RelativeSize", uno::Any(aRelativeSize) ); + xProp->setPropertyValue( "PosSizeExcludeAxes", uno::Any(false) ); +} + +// ____ XShapeDescriptor (base of XShape) ____ +OUString SAL_CALL DiagramWrapper::getShapeType() +{ + return "com.sun.star.chart.Diagram"; +} + +// ____ XDiagramPositioning ____ + +void SAL_CALL DiagramWrapper::setAutomaticDiagramPositioning() +{ + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + uno::Reference< beans::XPropertySet > xDiaProps( getDiagram(), uno::UNO_QUERY ); + if( xDiaProps.is() ) + { + xDiaProps->setPropertyValue( "RelativeSize", Any() ); + xDiaProps->setPropertyValue( "RelativePosition", Any() ); + } +} +sal_Bool SAL_CALL DiagramWrapper::isAutomaticDiagramPositioning( ) +{ + uno::Reference< beans::XPropertySet > xDiaProps( getDiagram(), uno::UNO_QUERY ); + if( xDiaProps.is() ) + { + Any aRelativeSize( xDiaProps->getPropertyValue( "RelativeSize" ) ); + Any aRelativePosition( xDiaProps->getPropertyValue( "RelativePosition" ) ); + if( aRelativeSize.hasValue() && aRelativePosition.hasValue() ) + return false; + } + return true; +} +void SAL_CALL DiagramWrapper::setDiagramPositionExcludingAxes( const awt::Rectangle& rPositionRect ) +{ + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + DiagramHelper::setDiagramPositioning( m_spChart2ModelContact->getDocumentModel(), rPositionRect ); + uno::Reference< beans::XPropertySet > xDiaProps( getDiagram(), uno::UNO_QUERY ); + if( xDiaProps.is() ) + xDiaProps->setPropertyValue("PosSizeExcludeAxes", uno::Any(true) ); +} +sal_Bool SAL_CALL DiagramWrapper::isExcludingDiagramPositioning() +{ + uno::Reference< beans::XPropertySet > xDiaProps( getDiagram(), uno::UNO_QUERY ); + if( xDiaProps.is() ) + { + Any aRelativeSize( xDiaProps->getPropertyValue( "RelativeSize" ) ); + Any aRelativePosition( xDiaProps->getPropertyValue( "RelativePosition" ) ); + if( aRelativeSize.hasValue() && aRelativePosition.hasValue() ) + { + bool bPosSizeExcludeAxes = false; + xDiaProps->getPropertyValue( "PosSizeExcludeAxes" ) >>= bPosSizeExcludeAxes; + return bPosSizeExcludeAxes; + } + } + return false; +} +awt::Rectangle SAL_CALL DiagramWrapper::calculateDiagramPositionExcludingAxes( ) +{ + return m_spChart2ModelContact->GetDiagramRectangleExcludingAxes(); +} +void SAL_CALL DiagramWrapper::setDiagramPositionIncludingAxes( const awt::Rectangle& rPositionRect ) +{ + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + DiagramHelper::setDiagramPositioning( m_spChart2ModelContact->getDocumentModel(), rPositionRect ); + uno::Reference< beans::XPropertySet > xDiaProps( getDiagram(), uno::UNO_QUERY ); + if( xDiaProps.is() ) + xDiaProps->setPropertyValue("PosSizeExcludeAxes", uno::Any(false) ); +} +awt::Rectangle SAL_CALL DiagramWrapper::calculateDiagramPositionIncludingAxes( ) +{ + return m_spChart2ModelContact->GetDiagramRectangleIncludingAxes(); +} +void SAL_CALL DiagramWrapper::setDiagramPositionIncludingAxesAndAxisTitles( const awt::Rectangle& rPositionRect ) +{ + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + awt::Rectangle aRect( m_spChart2ModelContact->SubstractAxisTitleSizes(rPositionRect) ); + DiagramWrapper::setDiagramPositionIncludingAxes( aRect ); +} +css::awt::Rectangle SAL_CALL DiagramWrapper::calculateDiagramPositionIncludingAxesAndAxisTitles( ) +{ + return m_spChart2ModelContact->GetDiagramRectangleIncludingTitle(); +} + +// ____ XAxisSupplier ____ +Reference< XAxis > SAL_CALL DiagramWrapper::getAxis( sal_Int32 nDimensionIndex ) +{ + Reference< XAxis > xAxis; + if(!nDimensionIndex) + { + if( !m_xXAxis.is() ) + m_xXAxis = new AxisWrapper( AxisWrapper::X_AXIS, m_spChart2ModelContact ); + xAxis = m_xXAxis; + } + else if(nDimensionIndex==1) + { + if( !m_xYAxis.is() ) + m_xYAxis = new AxisWrapper( AxisWrapper::Y_AXIS, m_spChart2ModelContact ); + xAxis = m_xYAxis; + } + else if(nDimensionIndex==2) + { + if( !m_xZAxis.is() ) + m_xZAxis = new AxisWrapper( AxisWrapper::Z_AXIS, m_spChart2ModelContact ); + xAxis = m_xZAxis; + } + return xAxis; +} + +Reference< XAxis > SAL_CALL DiagramWrapper::getSecondaryAxis( sal_Int32 nDimensionIndex ) +{ + Reference< XAxis > xAxis; + if(!nDimensionIndex) + { + if( !m_xSecondXAxis.is() ) + m_xSecondXAxis = new AxisWrapper( AxisWrapper::SECOND_X_AXIS, m_spChart2ModelContact ); + xAxis = m_xSecondXAxis; + } + else if(nDimensionIndex==1) + { + if( !m_xSecondYAxis.is() ) + m_xSecondYAxis = new AxisWrapper( AxisWrapper::SECOND_Y_AXIS, m_spChart2ModelContact ); + xAxis = m_xSecondYAxis; + } + return xAxis; +} + +// ____ XAxisZSupplier ____ +Reference< drawing::XShape > SAL_CALL DiagramWrapper::getZAxisTitle() +{ + Reference< drawing::XShape > xRet; + Reference< XAxis > xAxis( getAxis(2) ); + if( xAxis.is() ) + xRet.set( xAxis->getAxisTitle(), uno::UNO_QUERY ); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getZMainGrid() +{ + Reference< beans::XPropertySet > xRet; + Reference< XAxis > xAxis( getAxis(2) ); + if( xAxis.is() ) + xRet = xAxis->getMajorGrid(); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getZHelpGrid() +{ + Reference< beans::XPropertySet > xRet; + Reference< XAxis > xAxis( getAxis(2) ); + if( xAxis.is() ) + xRet = xAxis->getMinorGrid(); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getZAxis() +{ + if( ! m_xZAxis.is()) + m_xZAxis = new AxisWrapper( AxisWrapper::Z_AXIS, m_spChart2ModelContact ); + return Reference< beans::XPropertySet >( m_xZAxis, uno::UNO_QUERY ); +} + +// ____ XTwoAxisXSupplier ____ +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getSecondaryXAxis() +{ + if( ! m_xSecondXAxis.is()) + m_xSecondXAxis = new AxisWrapper( AxisWrapper::SECOND_X_AXIS, m_spChart2ModelContact ); + return Reference< beans::XPropertySet >( m_xSecondXAxis, uno::UNO_QUERY ); +} + +// ____ XAxisXSupplier (base of XTwoAxisXSupplier) ____ +Reference< drawing::XShape > SAL_CALL DiagramWrapper::getXAxisTitle() +{ + Reference< drawing::XShape > xRet; + Reference< XAxis > xAxis( getAxis(0) ); + if( xAxis.is() ) + xRet.set( xAxis->getAxisTitle(), uno::UNO_QUERY ); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getXAxis() +{ + if( ! m_xXAxis.is()) + m_xXAxis = new AxisWrapper( AxisWrapper::X_AXIS, m_spChart2ModelContact ); + return Reference< beans::XPropertySet >( m_xXAxis, uno::UNO_QUERY ); +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getXMainGrid() +{ + Reference< beans::XPropertySet > xRet; + Reference< XAxis > xAxis( getAxis(0) ); + if( xAxis.is() ) + xRet = xAxis->getMajorGrid(); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getXHelpGrid() +{ + Reference< beans::XPropertySet > xRet; + Reference< XAxis > xAxis( getAxis(0) ); + if( xAxis.is() ) + xRet = xAxis->getMinorGrid(); + return xRet; +} + +// ____ XTwoAxisYSupplier ____ +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getSecondaryYAxis() +{ + if( ! m_xSecondYAxis.is()) + m_xSecondYAxis = new AxisWrapper( AxisWrapper::SECOND_Y_AXIS, m_spChart2ModelContact ); + return Reference< beans::XPropertySet >( m_xSecondYAxis, uno::UNO_QUERY ); +} + +// ____ XAxisYSupplier (base of XTwoAxisYSupplier) ____ +Reference< drawing::XShape > SAL_CALL DiagramWrapper::getYAxisTitle() +{ + Reference< drawing::XShape > xRet; + Reference< XAxis > xAxis( getAxis(1) ); + if( xAxis.is() ) + xRet.set( xAxis->getAxisTitle(), uno::UNO_QUERY ); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getYAxis() +{ + if( ! m_xYAxis.is()) + m_xYAxis = new AxisWrapper( AxisWrapper::Y_AXIS, m_spChart2ModelContact ); + return Reference< beans::XPropertySet >( m_xYAxis, uno::UNO_QUERY ); +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getYMainGrid() +{ + Reference< beans::XPropertySet > xRet; + Reference< XAxis > xAxis( getAxis(1) ); + if( xAxis.is() ) + xRet = xAxis->getMajorGrid(); + return xRet; +} + +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getYHelpGrid() +{ + Reference< beans::XPropertySet > xRet; + Reference< XAxis > xAxis( getAxis(1) ); + if( xAxis.is() ) + xRet = xAxis->getMinorGrid(); + return xRet; +} + +// ____ XSecondAxisTitleSupplier ____ +Reference< drawing::XShape > SAL_CALL DiagramWrapper::getSecondXAxisTitle() +{ + Reference< drawing::XShape > xRet; + Reference< XAxis > xAxis( getSecondaryAxis(0) ); + if( xAxis.is() ) + xRet.set( xAxis->getAxisTitle(), uno::UNO_QUERY ); + return xRet; +} + +Reference< drawing::XShape > SAL_CALL DiagramWrapper::getSecondYAxisTitle() +{ + Reference< drawing::XShape > xRet; + Reference< XAxis > xAxis( getSecondaryAxis(1) ); + if( xAxis.is() ) + xRet.set( xAxis->getAxisTitle(), uno::UNO_QUERY ); + return xRet; +} + +// ____ XStatisticDisplay ____ +Reference< + beans::XPropertySet > SAL_CALL DiagramWrapper::getUpBar() +{ + if( !m_xUpBarWrapper.is() ) + { + m_xUpBarWrapper = new UpDownBarWrapper( true, m_spChart2ModelContact ); + } + return m_xUpBarWrapper; +} + +Reference< + beans::XPropertySet > SAL_CALL DiagramWrapper::getDownBar() +{ + if( !m_xDownBarWrapper.is() ) + { + m_xDownBarWrapper = new UpDownBarWrapper( false, m_spChart2ModelContact ); + } + return m_xDownBarWrapper; +} + +Reference< + beans::XPropertySet > SAL_CALL DiagramWrapper::getMinMaxLine() +{ + if( !m_xMinMaxLineWrapper.is() ) + { + m_xMinMaxLineWrapper = new MinMaxLineWrapper( m_spChart2ModelContact ); + } + return m_xMinMaxLineWrapper; +} + +// ____ X3DDisplay ____ +Reference< beans::XPropertySet > SAL_CALL DiagramWrapper::getWall() +{ + if( !m_xWall.is() ) + { + m_xWall = new WallFloorWrapper( true, m_spChart2ModelContact ); + } + return m_xWall; +} + +Reference< + beans::XPropertySet > SAL_CALL DiagramWrapper::getFloor() +{ + if( !m_xFloor.is() ) + { + m_xFloor = new WallFloorWrapper( false, m_spChart2ModelContact ); + } + return m_xFloor; +} + +// ____ X3DDefaultSetter ____ +void SAL_CALL DiagramWrapper::set3DSettingsToDefault() +{ + rtl::Reference< ::chart::Diagram > x3DDefaultSetter( m_spChart2ModelContact->getDiagram() ); + if( x3DDefaultSetter.is() ) + x3DDefaultSetter->set3DSettingsToDefault(); +} + +void SAL_CALL DiagramWrapper::setDefaultRotation() +{ + rtl::Reference< ::chart::Diagram > x3DDefaultSetter( m_spChart2ModelContact->getDiagram() ); + if( x3DDefaultSetter.is() ) + x3DDefaultSetter->setDefaultRotation(); +} + +void SAL_CALL DiagramWrapper::setDefaultIllumination() +{ + rtl::Reference< ::chart::Diagram > x3DDefaultSetter( m_spChart2ModelContact->getDiagram() ); + if( x3DDefaultSetter.is() ) + x3DDefaultSetter->setDefaultIllumination(); +} + +// ____ XComponent ____ +void SAL_CALL DiagramWrapper::dispose() +{ + std::unique_lock g(m_aMutex); + m_aEventListenerContainer.disposeAndClear( g, lang::EventObject( static_cast< ::cppu::OWeakObject* >( this ))); + + DisposeHelper::DisposeAndClear( m_xXAxis ); + DisposeHelper::DisposeAndClear( m_xYAxis ); + DisposeHelper::DisposeAndClear( m_xZAxis ); + DisposeHelper::DisposeAndClear( m_xSecondXAxis ); + DisposeHelper::DisposeAndClear( m_xSecondYAxis ); + DisposeHelper::DisposeAndClear( m_xWall ); + DisposeHelper::DisposeAndClear( m_xFloor ); + DisposeHelper::DisposeAndClear( m_xMinMaxLineWrapper ); + DisposeHelper::DisposeAndClear( m_xUpBarWrapper ); + DisposeHelper::DisposeAndClear( m_xDownBarWrapper ); + + clearWrappedPropertySet(); +} + +void SAL_CALL DiagramWrapper::addEventListener( + const Reference< lang::XEventListener >& xListener ) +{ + std::unique_lock g(m_aMutex); + m_aEventListenerContainer.addInterface( g, xListener ); +} + +void SAL_CALL DiagramWrapper::removeEventListener( + const Reference< lang::XEventListener >& aListener ) +{ + std::unique_lock g(m_aMutex); + m_aEventListenerContainer.removeInterface( g, aListener ); +} + +namespace { + +//PROP_DIAGRAM_DATAROW_SOURCE +class WrappedDataRowSourceProperty : public WrappedProperty +{ +public: + explicit WrappedDataRowSourceProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + mutable Any m_aOuterValue; +}; + +} + +WrappedDataRowSourceProperty::WrappedDataRowSourceProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty("DataRowSource",OUString()) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) +{ + m_aOuterValue = WrappedDataRowSourceProperty::getPropertyDefault( nullptr ); +} + +void WrappedDataRowSourceProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + css::chart::ChartDataRowSource eChartDataRowSource = css::chart::ChartDataRowSource_ROWS; + if( ! (rOuterValue >>= eChartDataRowSource) ) + { + sal_Int32 nNew = sal_Int32(css::chart::ChartDataRowSource_ROWS); + if( !(rOuterValue >>= nNew) ) + throw lang::IllegalArgumentException( "Property DataRowSource requires css::chart::ChartDataRowSource value", nullptr, 0 ); + eChartDataRowSource = css::chart::ChartDataRowSource(nNew); + } + + m_aOuterValue = rOuterValue; + + bool bNewUseColumns = eChartDataRowSource == css::chart::ChartDataRowSource_COLUMNS; + + OUString aRangeString; + bool bUseColumns = true; + bool bFirstCellAsLabel = true; + bool bHasCategories = true; + uno::Sequence< sal_Int32 > aSequenceMapping; + + if( DataSourceHelper::detectRangeSegmentation( + m_spChart2ModelContact->getDocumentModel(), aRangeString, aSequenceMapping, bUseColumns + , bFirstCellAsLabel, bHasCategories ) ) + { + if( bUseColumns != bNewUseColumns ) + { + aSequenceMapping.realloc(0); + DataSourceHelper::setRangeSegmentation( + m_spChart2ModelContact->getDocumentModel(), aSequenceMapping, bNewUseColumns , bFirstCellAsLabel , bHasCategories); + } + } +} + +Any WrappedDataRowSourceProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + OUString aRangeString; + bool bUseColumns = true; + bool bFirstCellAsLabel = true; + bool bHasCategories = true; + uno::Sequence< sal_Int32 > aSequenceMapping; + + if( DataSourceHelper::detectRangeSegmentation( + m_spChart2ModelContact->getDocumentModel(), aRangeString, aSequenceMapping, bUseColumns + , bFirstCellAsLabel, bHasCategories ) ) + { + css::chart::ChartDataRowSource eChartDataRowSource = css::chart::ChartDataRowSource_ROWS; + if(bUseColumns) + eChartDataRowSource = css::chart::ChartDataRowSource_COLUMNS; + + m_aOuterValue <<= eChartDataRowSource; + } + + return m_aOuterValue; +} + +Any WrappedDataRowSourceProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + aRet <<= css::chart::ChartDataRowSource_COLUMNS; + return aRet; +} + +namespace { + +//PROP_DIAGRAM_STACKED +//PROP_DIAGRAM_DEEP +//PROP_DIAGRAM_PERCENT_STACKED +class WrappedStackingProperty : public WrappedProperty +{ +public: + WrappedStackingProperty(StackMode eStackMode, std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +protected: //methods + bool detectInnerValue( StackMode& eInnerStackMode ) const; + +private: //member +std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + const StackMode m_eStackMode; + mutable Any m_aOuterValue; +}; + +} + +WrappedStackingProperty::WrappedStackingProperty(StackMode eStackMode, std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty(OUString(),OUString()) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) + , m_eStackMode( eStackMode ) +{ + switch( m_eStackMode ) + { + case StackMode::YStacked: + m_aOuterName = "Stacked"; + break; + case StackMode::YStackedPercent: + m_aOuterName = "Percent"; + break; + case StackMode::ZStacked: + m_aOuterName = "Deep"; + break; + default: + OSL_FAIL( "unexpected stack mode" ); + break; + } +} + +bool WrappedStackingProperty::detectInnerValue( StackMode& eStackMode ) const +{ + bool bHasDetectableInnerValue = false; + bool bIsAmbiguous = false; + rtl::Reference<Diagram> xDiagram = m_spChart2ModelContact->getDiagram(); + eStackMode = xDiagram ? xDiagram->getStackMode( bHasDetectableInnerValue, bIsAmbiguous ) : StackMode::NONE; + return bHasDetectableInnerValue; +} + +void WrappedStackingProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + bool bNewValue = false; + if( ! (rOuterValue >>= bNewValue) ) + throw lang::IllegalArgumentException( "Stacking Properties require boolean values", nullptr, 0 ); + + StackMode eInnerStackMode; + bool bHasDetectableInnerValue = detectInnerValue( eInnerStackMode ); + + if( !bHasDetectableInnerValue ) + { + m_aOuterValue = rOuterValue; + return; + } + + if( bNewValue && eInnerStackMode == m_eStackMode ) + return; + if( !bNewValue && eInnerStackMode != m_eStackMode ) + return; + + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( xDiagram.is() ) + { + StackMode eNewStackMode = bNewValue ? m_eStackMode : StackMode::NONE; + xDiagram->setStackMode( eNewStackMode ); + } +} + +Any WrappedStackingProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + StackMode eInnerStackMode; + if( detectInnerValue( eInnerStackMode ) ) + { + bool bValue = (eInnerStackMode == m_eStackMode); + return Any(bValue); + } + return m_aOuterValue; +} + +Any WrappedStackingProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + aRet <<= false; + return aRet; +} + +namespace { + +//PROP_DIAGRAM_THREE_D +class WrappedDim3DProperty : public WrappedProperty +{ +public: + explicit WrappedDim3DProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + mutable Any m_aOuterValue; +}; + +} + +WrappedDim3DProperty::WrappedDim3DProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty("Dim3D",OUString()) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) +{ + m_aOuterValue = WrappedDim3DProperty::getPropertyDefault( nullptr ); +} + +void WrappedDim3DProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + bool bNew3D = false; + if( ! (rOuterValue >>= bNew3D) ) + throw lang::IllegalArgumentException( "Property Dim3D requires boolean value", nullptr, 0 ); + + m_aOuterValue = rOuterValue; + + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( !xDiagram.is() ) + return; + + bool bOld3D = xDiagram->getDimension() == 3; + if( bOld3D != bNew3D ) + xDiagram->setDimension( bNew3D ? 3 : 2 ); +} + +Any WrappedDim3DProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( xDiagram.is() ) + { + bool b3D = xDiagram->getDimension() == 3; + m_aOuterValue <<= b3D; + } + return m_aOuterValue; +} + +Any WrappedDim3DProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + aRet <<= false; + return aRet; +} + +namespace { + +//PROP_DIAGRAM_VERTICAL +class WrappedVerticalProperty : public WrappedProperty +{ +public: + explicit WrappedVerticalProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + mutable Any m_aOuterValue; +}; + +} + +WrappedVerticalProperty::WrappedVerticalProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty("Vertical",OUString()) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) +{ + m_aOuterValue = WrappedVerticalProperty::getPropertyDefault( nullptr ); +} + +void WrappedVerticalProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + bool bNewVertical = false; + if( ! (rOuterValue >>= bNewVertical) ) + throw lang::IllegalArgumentException( "Property Vertical requires boolean value", nullptr, 0 ); + + m_aOuterValue = rOuterValue; + + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( !xDiagram.is() ) + return; + + bool bFound = false; + bool bAmbiguous = false; + bool bOldVertical = xDiagram->getVertical( bFound, bAmbiguous ); + if( bFound && ( bOldVertical != bNewVertical || bAmbiguous ) ) + xDiagram->setVertical( bNewVertical ); +} + +Any WrappedVerticalProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( xDiagram.is() ) + { + bool bFound = false; + bool bAmbiguous = false; + bool bVertical = xDiagram->getVertical( bFound, bAmbiguous ); + if( bFound ) + m_aOuterValue <<= bVertical; + } + return m_aOuterValue; +} + +Any WrappedVerticalProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + aRet <<= false; + return aRet; +} + +namespace { + +//PROP_DIAGRAM_NUMBER_OF_LINES +class WrappedNumberOfLinesProperty : public WrappedProperty +{ +public: + explicit WrappedNumberOfLinesProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +protected: //methods + bool detectInnerValue( uno::Any& rInnerValue ) const; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + mutable Any m_aOuterValue; +}; + +} + +WrappedNumberOfLinesProperty::WrappedNumberOfLinesProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty("NumberOfLines",OUString()) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) + , m_aOuterValue( getPropertyDefault(nullptr) ) +{ +} + +bool WrappedNumberOfLinesProperty::detectInnerValue( uno::Any& rInnerValue ) const +{ + sal_Int32 nNumberOfLines = 0; + bool bHasDetectableInnerValue = false; + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + rtl::Reference< ChartModel > xChartDoc( m_spChart2ModelContact->getDocumentModel() ); + if( xDiagram.is() && xChartDoc.is() ) + { + std::vector< rtl::Reference< DataSeries > > aSeriesVector = + xDiagram->getDataSeries(); + if( !aSeriesVector.empty() ) + { + rtl::Reference< ::chart::ChartTypeManager > xChartTypeManager = xChartDoc->getTypeManager(); + Diagram::tTemplateWithServiceName aTemplateAndService = + xDiagram->getTemplate( xChartTypeManager ); + if( aTemplateAndService.sServiceName == "com.sun.star.chart2.template.ColumnWithLine" ) + { + try + { + uno::Reference< beans::XPropertySet > xProp( static_cast<cppu::OWeakObject*>(aTemplateAndService.xChartTypeTemplate.get()), uno::UNO_QUERY ); + xProp->getPropertyValue( m_aOuterName ) >>= nNumberOfLines; + bHasDetectableInnerValue = true; + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } + } + } + } + if(bHasDetectableInnerValue) + rInnerValue <<= nNumberOfLines; + return bHasDetectableInnerValue; +} + +void WrappedNumberOfLinesProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + sal_Int32 nNewValue; + if( ! (rOuterValue >>= nNewValue) ) + throw lang::IllegalArgumentException( "property NumberOfLines requires sal_Int32 value", nullptr, 0 ); + + m_aOuterValue = rOuterValue; + + rtl::Reference< ChartModel > xChartDoc( m_spChart2ModelContact->getDocumentModel() ); + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( !xChartDoc || !xDiagram ) + return; + sal_Int32 nDimension = xDiagram->getDimension(); + if( nDimension != 2 ) + return; + + rtl::Reference< ::chart::ChartTypeManager > xChartTypeManager = xChartDoc->getTypeManager(); + Diagram::tTemplateWithServiceName aTemplateAndService = + xDiagram->getTemplate( xChartTypeManager ); + + rtl::Reference< ChartTypeTemplate > xTemplate; + if( aTemplateAndService.sServiceName == "com.sun.star.chart2.template.ColumnWithLine" ) + { + if( nNewValue != 0 ) + { + xTemplate = aTemplateAndService.xChartTypeTemplate; + try + { + sal_Int32 nOldValue = 0; + uno::Reference< beans::XPropertySet > xProp( static_cast<cppu::OWeakObject*>(xTemplate.get()), uno::UNO_QUERY ); + xProp->getPropertyValue( m_aOuterName ) >>= nOldValue; + if( nOldValue == nNewValue ) + return; + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } + } + else + { + xTemplate = xChartTypeManager->createTemplate("com.sun.star.chart2.template.Column"); + } + } + else if( aTemplateAndService.sServiceName == "com.sun.star.chart2.template.Column" ) + { + if( nNewValue == 0 ) + return; + xTemplate = xChartTypeManager->createTemplate( "com.sun.star.chart2.template.ColumnWithLine" ); + } + + if(!xTemplate.is()) + return; + + try + { + // locked controllers + ControllerLockGuardUNO aCtrlLockGuard( m_spChart2ModelContact->getDocumentModel() ); + uno::Reference< beans::XPropertySet > xProp( static_cast<cppu::OWeakObject*>(xTemplate.get()), uno::UNO_QUERY ); + xProp->setPropertyValue( "NumberOfLines", uno::Any(nNewValue) ); + xTemplate->changeDiagram( xDiagram ); + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } +} + +Any WrappedNumberOfLinesProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + Any aRet; + if( !detectInnerValue( aRet ) ) + aRet = m_aOuterValue; + return aRet; +} + +Any WrappedNumberOfLinesProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + aRet <<= sal_Int32( 0 ); + return aRet; +} + +namespace { + +//PROP_DIAGRAM_ATTRIBUTED_DATA_POINTS +class WrappedAttributedDataPointsProperty : public WrappedProperty +{ +public: + explicit WrappedAttributedDataPointsProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + mutable Any m_aOuterValue; +}; + +} + +WrappedAttributedDataPointsProperty::WrappedAttributedDataPointsProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty("AttributedDataPoints",OUString()) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) +{ + m_aOuterValue = WrappedAttributedDataPointsProperty::getPropertyDefault( nullptr ); +} + +void WrappedAttributedDataPointsProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + uno::Sequence< uno::Sequence< sal_Int32 > > aNewValue; + if( ! (rOuterValue >>= aNewValue) ) + throw lang::IllegalArgumentException( "Property AttributedDataPoints requires value of type uno::Sequence< uno::Sequence< sal_Int32 > >", nullptr, 0 ); + + m_aOuterValue = rOuterValue; + + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + + if( !xDiagram ) + return; + + std::vector< rtl::Reference< DataSeries > > aSeriesVector = + xDiagram->getDataSeries(); + sal_Int32 i = 0; + for (auto const& series : aSeriesVector) + { + uno::Any aVal; + if( i < aNewValue.getLength() ) + aVal <<= aNewValue[i]; + else + { + //set empty sequence + uno::Sequence< sal_Int32 > aSeq; + aVal <<= aSeq; + } + series->setFastPropertyValue( PROP_DATASERIES_ATTRIBUTED_DATA_POINTS, aVal ); // "AttributedDataPoints" + ++i; + } +} + +Any WrappedAttributedDataPointsProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + + if( xDiagram ) + { + std::vector< rtl::Reference< DataSeries > > aSeriesVector = + xDiagram->getDataSeries(); + + uno::Sequence< uno::Sequence< sal_Int32 > > aResult( aSeriesVector.size() ); + auto aResultRange = asNonConstRange(aResult); + sal_Int32 i = 0; + for (auto const& series : aSeriesVector) + { + uno::Any aVal( + series->getFastPropertyValue(PROP_DATASERIES_ATTRIBUTED_DATA_POINTS)); // "AttributedDataPoints" + uno::Sequence< sal_Int32 > aSeq; + if( aVal >>= aSeq ) + aResultRange[ i ] = aSeq; + ++i; + } + m_aOuterValue <<= aResult; + } + return m_aOuterValue; +} + +Any WrappedAttributedDataPointsProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + uno::Sequence< uno::Sequence< sal_Int32 > > aSeq; + aRet <<= aSeq; + return aRet; +} + +namespace { + +//PROP_DIAGRAM_SOLIDTYPE +class WrappedSolidTypeProperty : public WrappedProperty +{ +public: + explicit WrappedSolidTypeProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; + mutable Any m_aOuterValue; +}; + +} + +WrappedSolidTypeProperty::WrappedSolidTypeProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty( "SolidType", OUString() ) + , m_spChart2ModelContact(std::move( spChart2ModelContact )) +{ + m_aOuterValue = WrappedSolidTypeProperty::getPropertyDefault( nullptr ); +} + +void WrappedSolidTypeProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + sal_Int32 nNewSolidType = css::chart::ChartSolidType::RECTANGULAR_SOLID; + if( ! (rOuterValue >>= nNewSolidType) ) + throw lang::IllegalArgumentException( "Property SolidType requires integer value", nullptr, 0 ); + + m_aOuterValue = rOuterValue; + + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( !xDiagram.is() ) + return; + + bool bFound = false; + bool bAmbiguous = false; + sal_Int32 nOldSolidType = xDiagram->getGeometry3D( bFound, bAmbiguous ); + if( bFound && ( nOldSolidType != nNewSolidType || bAmbiguous ) ) + xDiagram->setGeometry3D( nNewSolidType ); +} + +Any WrappedSolidTypeProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + rtl::Reference< ::chart::Diagram > xDiagram( m_spChart2ModelContact->getDiagram() ); + if( xDiagram.is() ) + { + bool bFound = false; + bool bAmbiguous = false; + sal_Int32 nGeometry = xDiagram->getGeometry3D( bFound, bAmbiguous ); + if( bFound ) + m_aOuterValue <<= nGeometry; + } + return m_aOuterValue; +} + +Any WrappedSolidTypeProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + return uno::Any( css::chart::ChartSolidType::RECTANGULAR_SOLID ); +} + +namespace { + +class WrappedAutomaticSizeProperty : public WrappedProperty +{ +public: + WrappedAutomaticSizeProperty(); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyValue( const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + + virtual css::uno::Any getPropertyDefault( const css::uno::Reference< css::beans::XPropertyState >& xInnerPropertyState ) const override; +}; + +} + +WrappedAutomaticSizeProperty::WrappedAutomaticSizeProperty() + : WrappedProperty( "AutomaticSize", OUString() ) +{ +} + +void WrappedAutomaticSizeProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& xInnerPropertySet ) const +{ + if( !xInnerPropertySet.is() ) + return; + + bool bNewValue = true; + if( ! (rOuterValue >>= bNewValue) ) + throw lang::IllegalArgumentException( "Property AutomaticSize requires value of type boolean", nullptr, 0 ); + + try + { + if( bNewValue ) + { + Any aRelativeSize( xInnerPropertySet->getPropertyValue( "RelativeSize" ) ); + if( aRelativeSize.hasValue() ) + xInnerPropertySet->setPropertyValue( "RelativeSize", Any() ); + } + } + catch( const uno::Exception & ) + { + DBG_UNHANDLED_EXCEPTION("chart2"); + } +} + +Any WrappedAutomaticSizeProperty::getPropertyValue( const Reference< beans::XPropertySet >& xInnerPropertySet ) const +{ + Any aRet( getPropertyDefault( Reference< beans::XPropertyState >( xInnerPropertySet, uno::UNO_QUERY ) ) ); + if( xInnerPropertySet.is() ) + { + Any aRelativeSize( xInnerPropertySet->getPropertyValue( "RelativeSize" ) ); + if( !aRelativeSize.hasValue() ) + aRet <<= true; + } + return aRet; +} + +Any WrappedAutomaticSizeProperty::getPropertyDefault( const Reference< beans::XPropertyState >& /*xInnerPropertyState*/ ) const +{ + Any aRet; + aRet <<= false; + return aRet; +} + +namespace { + +//PROP_DIAGRAM_INCLUDE_HIDDEN_CELLS +class WrappedIncludeHiddenCellsProperty : public WrappedProperty +{ +public: + explicit WrappedIncludeHiddenCellsProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact); + + virtual void setPropertyValue( const css::uno::Any& rOuterValue, const css::uno::Reference< css::beans::XPropertySet >& xInnerPropertySet ) const override; + virtual Any getPropertyValue(const Reference<beans::XPropertySet>& xInnerPropertySet) const override; + +private: //member + std::shared_ptr< Chart2ModelContact > m_spChart2ModelContact; +}; + +} + +WrappedIncludeHiddenCellsProperty::WrappedIncludeHiddenCellsProperty(std::shared_ptr<Chart2ModelContact> spChart2ModelContact) + : WrappedProperty("IncludeHiddenCells","IncludeHiddenCells") + , m_spChart2ModelContact(std::move( spChart2ModelContact )) +{ +} + +void WrappedIncludeHiddenCellsProperty::setPropertyValue( const Any& rOuterValue, const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + bool bNewValue = false; + if( ! (rOuterValue >>= bNewValue) ) + throw lang::IllegalArgumentException( "Property IncludeHiddenCells requires boolean value", nullptr, 0 ); + + ChartModelHelper::setIncludeHiddenCells( bNewValue, *m_spChart2ModelContact->getDocumentModel() ); +} + +Any WrappedIncludeHiddenCellsProperty::getPropertyValue( const Reference< beans::XPropertySet >& /*xInnerPropertySet*/ ) const +{ + bool bValue = ChartModelHelper::isIncludeHiddenCells( m_spChart2ModelContact->getDocumentModel() ); + return uno::Any(bValue); +} + +// ____ XDiagramProvider ____ +Reference< chart2::XDiagram > SAL_CALL DiagramWrapper::getDiagram() +{ + return m_spChart2ModelContact->getDiagram(); +} + +void SAL_CALL DiagramWrapper::setDiagram( + const Reference< chart2::XDiagram >& /*xDiagram*/ ) +{ + //@todo: remove this method from interface + OSL_FAIL("DiagramWrapper::setDiagram is not implemented, should be removed and not be called" ); +} + +Reference< beans::XPropertySet > DiagramWrapper::getInnerPropertySet() +{ + return m_spChart2ModelContact->getDiagram(); +} + +const Sequence< beans::Property >& DiagramWrapper::getPropertySequence() +{ + return StaticDiagramWrapperPropertyArray(); +} + +std::vector< std::unique_ptr<WrappedProperty> > DiagramWrapper::createWrappedProperties() +{ + std::vector< std::unique_ptr<WrappedProperty> > aWrappedProperties; + + WrappedAxisAndGridExistenceProperties::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); + WrappedAxisTitleExistenceProperties::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); + WrappedAxisLabelExistenceProperties::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); + WrappedSceneProperty::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); + WrappedIgnoreProperties::addIgnoreFillProperties( aWrappedProperties ); + WrappedIgnoreProperties::addIgnoreLineProperties( aWrappedProperties ); + WrappedStatisticProperties::addWrappedPropertiesForDiagram( aWrappedProperties, m_spChart2ModelContact ); + WrappedSymbolProperties::addWrappedPropertiesForDiagram( aWrappedProperties, m_spChart2ModelContact ); + WrappedDataCaptionProperties::addWrappedPropertiesForDiagram( aWrappedProperties, m_spChart2ModelContact ); + WrappedSplineProperties::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); + WrappedStockProperties::addWrappedProperties( aWrappedProperties, m_spChart2ModelContact ); + WrappedAutomaticPositionProperties::addWrappedProperties( aWrappedProperties ); + + aWrappedProperties.emplace_back( new WrappedDataRowSourceProperty( m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedStackingProperty( StackMode::YStacked,m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedStackingProperty( StackMode::YStackedPercent, m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedStackingProperty( StackMode::ZStacked, m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedDim3DProperty( m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedVerticalProperty( m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedNumberOfLinesProperty( m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedAttributedDataPointsProperty( m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedProperty( "StackedBarsConnected", "ConnectBars" ) ); + aWrappedProperties.emplace_back( new WrappedSolidTypeProperty( m_spChart2ModelContact ) ); + aWrappedProperties.emplace_back( new WrappedAutomaticSizeProperty() ); + aWrappedProperties.emplace_back( new WrappedIncludeHiddenCellsProperty( m_spChart2ModelContact ) ); + + return aWrappedProperties; +} + +OUString SAL_CALL DiagramWrapper::getImplementationName() +{ + return "com.sun.star.comp.chart.Diagram"; +} + +sal_Bool SAL_CALL DiagramWrapper::supportsService( const OUString& rServiceName ) +{ + return cppu::supportsService(this, rServiceName); +} + +css::uno::Sequence< OUString > SAL_CALL DiagramWrapper::getSupportedServiceNames() +{ + return { + "com.sun.star.chart.Diagram", + "com.sun.star.xml.UserDefinedAttributesSupplier", + "com.sun.star.chart.StackableDiagram", + "com.sun.star.chart.ChartAxisXSupplier", + "com.sun.star.chart.ChartAxisYSupplier", + "com.sun.star.chart.ChartAxisZSupplier", + "com.sun.star.chart.ChartTwoAxisXSupplier", + "com.sun.star.chart.ChartTwoAxisYSupplier" + }; +} + +} // namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |