diff options
Diffstat (limited to 'chart2/source/controller/dialogs/ChartResourceGroups.cxx')
| -rw-r--r-- | chart2/source/controller/dialogs/ChartResourceGroups.cxx | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/chart2/source/controller/dialogs/ChartResourceGroups.cxx b/chart2/source/controller/dialogs/ChartResourceGroups.cxx new file mode 100644 index 0000000000..e1550d2766 --- /dev/null +++ b/chart2/source/controller/dialogs/ChartResourceGroups.cxx @@ -0,0 +1,383 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <ChartResourceGroups.hxx> +#include <ChartResourceGroupDlgs.hxx> + +#include <strings.hrc> +#include <ResId.hxx> + +namespace chart +{ +using namespace ::com::sun::star; +using namespace ::com::sun::star::chart2; + +Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder) + : m_xCB_3DLook(pBuilder->weld_check_button("3dlook")) + , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme")) +{ + m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl)); + m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl)); +} + +void Dim3DLookResourceGroup::showControls(bool bShow) +{ + m_xCB_3DLook->set_visible(bShow); + m_xLB_Scheme->set_visible(bShow); +} + +void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + m_xCB_3DLook->set_active(rParameter.b3DLook); + m_xLB_Scheme->set_sensitive(rParameter.b3DLook); + + // tdf#124295 - select always a 3D scheme + switch (rParameter.eThreeDLookScheme) + { + case ThreeDLookScheme::ThreeDLookScheme_Simple: + m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE); + break; + case ThreeDLookScheme::ThreeDLookScheme_Realistic: + case ThreeDLookScheme::ThreeDLookScheme_Unknown: + m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC); + break; + } +} + +void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + rParameter.b3DLook = m_xCB_3DLook->get_active(); + // tdf#124295 - select always a 3D scheme + switch (m_xLB_Scheme->get_active()) + { + case POS_3DSCHEME_SIMPLE: + rParameter.eThreeDLookScheme = ThreeDLookScheme::ThreeDLookScheme_Simple; + break; + default: + rParameter.eThreeDLookScheme = ThreeDLookScheme::ThreeDLookScheme_Realistic; + } +} + +IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::Toggleable&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder) + : m_xCB_XValueSorting(pBuilder->weld_check_button("sort")) +{ + m_xCB_XValueSorting->connect_toggled( + LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl)); +} + +void SortByXValuesResourceGroup::showControls(bool bShow) +{ + m_xCB_XValueSorting->set_visible(bShow); +} + +void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + m_xCB_XValueSorting->set_active(rParameter.bSortByXValues); +} + +void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + rParameter.bSortByXValues = m_xCB_XValueSorting->get_active(); +} + +IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::Toggleable&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder) + : m_xCB_Stacked(pBuilder->weld_check_button("stack")) + , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop")) + , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent")) + , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep")) +{ + m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl)); + m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); + m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); + m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); +} + +void StackingResourceGroup::showControls(bool bShow) +{ + m_xCB_Stacked->set_visible(bShow); + m_xRB_Stack_Y->set_visible(bShow); + m_xRB_Stack_Y_Percent->set_visible(bShow); + m_xRB_Stack_Z->set_visible(false); +} + +void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + m_xCB_Stacked->set_active( + rParameter.eStackMode != GlobalStackMode_NONE + && rParameter.eStackMode + != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used + switch (rParameter.eStackMode) + { + case GlobalStackMode_STACK_Y: + m_xRB_Stack_Y->set_active(true); + break; + case GlobalStackMode_STACK_Y_PERCENT: + m_xRB_Stack_Y_Percent->set_active(true); + break; + case GlobalStackMode_STACK_Z: + //todo uncomment this condition if z stacking radio button is really used + /* + if( rParameter.b3DLook ) + m_xRB_Stack_Z->set_active(true); + else + */ + m_xRB_Stack_Y->set_active(true); + break; + default: + m_xRB_Stack_Y->set_active(true); + break; + } + //dis/enabling + m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues); + m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues); + m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active() + && !rParameter.bXAxisWithValues); + m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook); +} + +void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + if (!m_xCB_Stacked->get_active()) + rParameter.eStackMode = GlobalStackMode_NONE; + else if (m_xRB_Stack_Y->get_active()) + rParameter.eStackMode = GlobalStackMode_STACK_Y; + else if (m_xRB_Stack_Y_Percent->get_active()) + rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT; + else if (m_xRB_Stack_Z->get_active()) + rParameter.eStackMode = GlobalStackMode_STACK_Z; +} + +IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::Toggleable&, rRadio, void) +{ + //for each radio click there are coming two change events + //first uncheck of previous button -> ignore that call + //the second call gives the check of the new button + if (m_pChangeListener && rRadio.get_active()) + m_pChangeListener->stateChanged(); +} + +IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::Toggleable&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent) + : m_pParent(pParent) + , m_xFT_LineType(pBuilder->weld_label("linetypeft")) + , m_xLB_LineType(pBuilder->weld_combo_box("linetype")) + , m_xPB_DetailsDialog(pBuilder->weld_button("properties")) +{ + m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl)); +} + +std::shared_ptr<SplinePropertiesDialog> SplineResourceGroup::getSplinePropertiesDialog() +{ + if (!m_xSplinePropertiesDialog) + { + m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent)); + } + return m_xSplinePropertiesDialog; +} + +std::shared_ptr<SteppedPropertiesDialog> SplineResourceGroup::getSteppedPropertiesDialog() +{ + if (!m_xSteppedPropertiesDialog) + { + m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent)); + } + return m_xSteppedPropertiesDialog; +} + +void SplineResourceGroup::showControls(bool bShow) +{ + m_xFT_LineType->set_visible(bShow); + m_xLB_LineType->set_visible(bShow); + m_xPB_DetailsDialog->set_visible(bShow); +} + +void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + switch (rParameter.eCurveStyle) + { + case CurveStyle_LINES: + m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT); + m_xPB_DetailsDialog->set_sensitive(false); + break; + case CurveStyle_CUBIC_SPLINES: + case CurveStyle_B_SPLINES: + m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH); + m_xPB_DetailsDialog->set_sensitive(true); + m_xPB_DetailsDialog->connect_clicked( + LINK(this, SplineResourceGroup, SplineDetailsDialogHdl)); + m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES)); + getSplinePropertiesDialog()->fillControls(rParameter); + break; + case CurveStyle_STEP_START: + case CurveStyle_STEP_END: + case CurveStyle_STEP_CENTER_X: + case CurveStyle_STEP_CENTER_Y: + m_xLB_LineType->set_active(POS_LINETYPE_STEPPED); + m_xPB_DetailsDialog->set_sensitive(true); + m_xPB_DetailsDialog->connect_clicked( + LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl)); + m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES)); + getSteppedPropertiesDialog()->fillControls(rParameter); + break; + default: + m_xLB_LineType->set_active(-1); + m_xPB_DetailsDialog->set_sensitive(false); + } +} +void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + switch (m_xLB_LineType->get_active()) + { + case POS_LINETYPE_SMOOTH: + getSplinePropertiesDialog()->fillParameter(rParameter, true); + break; + case POS_LINETYPE_STEPPED: + getSteppedPropertiesDialog()->fillParameter(rParameter, true); + break; + default: // includes POS_LINETYPE_STRAIGHT + rParameter.eCurveStyle = CurveStyle_LINES; + break; + } +} + +IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void) +{ + ChartTypeParameter aOldParameter; + std::shared_ptr<SplinePropertiesDialog> xDlg = getSplinePropertiesDialog(); + xDlg->fillParameter(aOldParameter, m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH); + + const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active(); + m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH); + weld::GenericDialogController::runAsync(xDlg, [this, xDlg, aOldParameter, + iOldLineTypePos](sal_Int32 nResult) { + m_xSplinePropertiesDialog = nullptr; + auto xNewDlg = getSplinePropertiesDialog(); + + if (nResult == RET_OK) + { + ChartTypeParameter aNewParameter; + xDlg->fillParameter(aNewParameter, m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH); + xNewDlg->fillControls(aNewParameter); + + if (m_pChangeListener) + m_pChangeListener->stateChanged(); + } + else + { + //restore old state: + m_xLB_LineType->set_active(iOldLineTypePos); + xNewDlg->fillControls(aOldParameter); + } + }); +} + +IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void) +{ + ChartTypeParameter aOldParameter; + std::shared_ptr<SteppedPropertiesDialog> xDlg = getSteppedPropertiesDialog(); + xDlg->fillParameter(aOldParameter, m_xLB_LineType->get_active() == POS_LINETYPE_STEPPED); + + const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active(); + m_xLB_LineType->set_active(POS_LINETYPE_STEPPED); + + weld::GenericDialogController::runAsync( + xDlg, [this, xDlg, aOldParameter, iOldLineTypePos](sal_Int32 nResult) { + m_xSteppedPropertiesDialog = nullptr; + auto xNewDlg = getSteppedPropertiesDialog(); + + if (nResult == RET_OK) + { + ChartTypeParameter aNewParameter; + xDlg->fillParameter(aNewParameter, + m_xLB_LineType->get_active() == POS_LINETYPE_STEPPED); + xNewDlg->fillControls(aNewParameter); + + if (m_pChangeListener) + m_pChangeListener->stateChanged(); + } + else + { + //restore old state: + m_xLB_LineType->set_active(iOldLineTypePos); + xDlg->fillControls(aOldParameter); + } + }); +} + +GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder) + : m_aGeometryResources(pBuilder) +{ + m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl)); +} + +void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); } + +void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D); + m_aGeometryResources.select(nGeometry3D); + m_aGeometryResources.set_sensitive(rParameter.b3DLook); +} + +void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + rParameter.nGeometry3D = 1; + int nSelected = m_aGeometryResources.get_selected_index(); + if (nSelected != -1) + rParameter.nGeometry3D = nSelected; +} + +IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |