diff options
Diffstat (limited to 'include/vcl/roadmapwizard.hxx')
| -rw-r--r-- | include/vcl/roadmapwizard.hxx | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/include/vcl/roadmapwizard.hxx b/include/vcl/roadmapwizard.hxx new file mode 100644 index 0000000000..be2eb5669e --- /dev/null +++ b/include/vcl/roadmapwizard.hxx @@ -0,0 +1,189 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#ifndef INCLUDED_VCL_ROADMAPWIZARD_HXX +#define INCLUDED_VCL_ROADMAPWIZARD_HXX + +#include <memory> +#include <vcl/dllapi.h> +#include <vcl/wizardmachine.hxx> + +namespace vcl +{ + struct RoadmapWizardImpl; + + namespace RoadmapWizardTypes + { + typedef sal_Int16 PathId; + typedef ::std::vector< WizardTypes::WizardState > WizardPath; + }; + + //= RoadmapWizard + + /** is - no, not a wizard for a roadmap, but the base class for wizards + <em>supporting</em> a roadmap. + + The basic new concept introduced is a <em>path</em>:<br/> + A <em>path</em> is a sequence of states, which are to be executed in a linear order. + Elements in the path can be skipped, depending on choices the user makes. + + In the most simple wizards, you will have only one path consisting of <code>n</code> elements, + which are to be visited successively. + + In a slightly more complex wizard, you will have one linear path, were certain + steps might be skipped due to user input. For instance, the user may decide to not specify + certain aspects of the to-be-created object (e.g. by unchecking a check box), + and the wizard then will simply disable the step which corresponds to this step. + + In a yet more advanced wizards, you will have several paths of length <code>n1</code> and + <code>n2</code>, which share at least the first <code>k</code> states (where <code>k</code> + is at least 1), and an arbitrary number of other states. + */ + class VCL_DLLPUBLIC RoadmapWizardMachine : public vcl::WizardMachine + { + private: + std::unique_ptr<RoadmapWizardImpl> m_pImpl; + + public: + RoadmapWizardMachine(weld::Window* _pParent); + virtual ~RoadmapWizardMachine( ) override; + + void SetRoadmapHelpId( const OUString& _rId ); + + // returns whether a given state is enabled + bool isStateEnabled(WizardTypes::WizardState nState) const; + + // WizardDialog overridables + virtual bool canAdvance() const override; + virtual void updateTravelUI() override; + + protected: + /** declares a valid path in the wizard + + The very first path which is declared is automatically activated. + + Note that all paths which are declared must have the very first state in + common. Also note that due to a restriction of the very base class (WizardDialog), + this common first state must be 0. + + You cannot declare new paths once the wizard started, so it's recommended that + you do all declarations within your derivee's constructor. + + @see activatePath + + @param _nId + the unique id you wish to give this path. This id can later on be used + to refer to the path which you just declared + */ + void declarePath( RoadmapWizardTypes::PathId _nPathId, const RoadmapWizardTypes::WizardPath& _lWizardStates); + + /** activates a path which has previously been declared with <member>declarePath</member> + + You can only activate paths which share the first <code>k</code> states with the path + which is previously active (if any), where <code>k</code> is the index of the + current state within the current path. + + <example> + Say you have paths, <code>(0,1,2,5)</code> and <code>(0,1,4,5)</code>. This means that after + step <code>1</code>, you either continue with state <code>2</code> or state <code>4</code>, + and after this, you finish in state <code>5</code>.<br/> + Now if the first path is active, and your current state is <code>1</code>, then you can + easily switch to the second path, since both paths start with <code>(0,1)</code>.<br/> + However, if your current state is <code>2</code>, then you can not switch to the second + path anymore. + </example> + + @param _nPathId + the id of the path. The path must have been declared (under this id) with + <member>declarePath</member> before it can be activated. + + @param _bDecideForIt + If <TRUE/>, the path will be completely activated, even if it is a conflicting path + (i.e. there is another path which shares the first <code>k</code> states with + the to-be-activated path.)<br/> + If <FALSE/>, then the new path is checked for conflicts with other paths. If such + conflicts exists, the path is not completely activated, but only up to the point + where it does <em>not</em> conflict.<br/> + With the paths in the example above, if you activate the second path (when both are + already declared), then only steps <code>0</code> and <code>1</code> are activated, + since they are common to both paths. + */ + void activatePath( RoadmapWizardTypes::PathId _nPathId, bool _bDecideForIt = false ); + + /** determine the next state to travel from the given one + + This method (which is declared in WizardMachine and overwritten here) + ensures that traveling happens along the active path. + + @see activatePath + */ + virtual WizardTypes::WizardState determineNextState(WizardTypes::WizardState nCurrentState) const override; + + /** en- or disables a state + + In the wizard's roadmap, states to travel to can be freely chosen. To prevent + users from selecting a state which is currently not available, you can declare this + state as being disabled. + + A situation where you need this may be when you have a checkbox which, when checked + by the user, enables a page with additional settings. As long as this checkbox is + not checked, the respective state would be disabled. + + Note that in theory, you can declare multiple paths, instead of disabling states. + For instance, if you have a path where one state can be potentially disabled, then + you could declare a second path, which does not contain this state. However, the + disadvantage is that then, not the complete path would be visible in the roadmap, + but only all steps up to the point where the both paths diverge.<br/> + Another disadvantage is that the number of needed paths grows exponentially with + the number of states which can be potentially disabled. + + @see declarePath + */ + void enableState(WizardTypes::WizardState nState, bool _bEnable = true); + + /** returns true if and only if the given state is known in at least one declared path + */ + bool knowsState(WizardTypes::WizardState nState) const; + + // WizardMachine overriables + virtual void enterState(WizardTypes::WizardState nState) override; + + /** returns a human readable name for a given state + + There is a default implementation for this method, which returns the display name + as given in a call to describeState. If there is no description for the given state, + this is worth an assertion in a non-product build, and then an empty string is + returned. + */ + virtual OUString getStateDisplayName(WizardTypes::WizardState nState) const; + + private: + DECL_DLLPRIVATE_LINK( OnRoadmapItemSelected, const OUString&, bool ); + + /** updates the roadmap control to show the given path, as far as possible + (modulo conflicts with other paths) + */ + VCL_DLLPRIVATE void implUpdateRoadmap( ); + }; +} // namespace vcl + + +#endif // OOO_ INCLUDED_VCL_ROADMAPWIZARD_HXX + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |