path: root/officecfg/registry/schema/org/openoffice/Setup.xcs

<?xml version="1.0" encoding="UTF-8"?>
<!--
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 -->
<!DOCTYPE oor:component-schema SYSTEM "../../../component-schema.dtd">
<oor:component-schema xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" oor:package="org.openoffice" oor:name="Setup" xml:lang="en-US">
  <info>
    <desc>Contains Setup preferences, such as the installed UI locales or the
    available modules.</desc>
  </info>
  <templates>
    <group oor:name="InstalledLocale">
      <info>
        <desc>Describes a language pack that is installed to provide a localized
        office UI.</desc>
      </info>
      <prop oor:name="Origin" oor:type="xs:string">
        <info>
          <desc>Identifies the organization, group or person that provided this
          language pack.</desc>
        </info>
      </prop>
    </group>
    <group oor:name="MigrationStep">
      <info>
        <desc>Describes one step of migration</desc>
      </info>
      <prop oor:name="MigrationService" oor:type="xs:string">
        <info>
          <desc>an optional uno service that is called after files and nodes
          have been copied in order to perform custom migration actions. The
          service needs to support XInitializable and XJob interfaces according
          do
          http://specs.openoffice.org/appwide/migration/spec_migration.sxw</desc>
        </info>
      </prop>
      <prop oor:name="IncludedFiles" oor:type="oor:string-list">
        <info>
          <desc>a list of wildcards relative to the old userdata origin that are
          to be copied</desc>
        </info>
      </prop>
      <prop oor:name="ExcludedFiles" oor:type="oor:string-list">
        <info>
          <desc>a list of wildcards relative to the old userdata origin that are
          to be copied</desc>
        </info>
      </prop>
      <prop oor:name="IncludedNodes" oor:type="oor:string-list">
        <info>
          <desc>a list of configuration node paths that are to be moved from the
          old user layer to the new user layer</desc>
        </info>
      </prop>
      <prop oor:name="ExcludedNodes" oor:type="oor:string-list">
        <info>
          <desc>a list of configuration node paths that are not to be moved from
          the old user layer to the new user layer</desc>
        </info>
      </prop>
      <prop oor:name="ExcludedExtensions" oor:type="oor:string-list">
        <info>
          <desc>a list of extension identifiers that are not to be copied from
          the old user layer to the new user layer</desc>
        </info>
      </prop>
    </group>
    <group oor:name="MigrateVersion">
      <info>
        <desc>Describes migration steps specific for certain version(s)</desc>
      </info>
      <prop oor:name="VersionIdentifiers" oor:type="oor:string-list" oor:nillable="false">
        <info>
          <desc>version identifiers, that are supported for migration</desc>
        </info>
        <value/>
      </prop>
      <prop oor:name="Priority" oor:type="xs:int" oor:nillable="false">
        <info>
          <desc>Contains the priority value to specify which migration should be
          preferred. Higher values are preferred.</desc>
        </info>
        <value/>
      </prop>
      <set oor:name="MigrationSteps" oor:node-type="MigrationStep">
        <info>
          <desc>Contains necessary migration steps for specific versions</desc>
        </info>
      </set>
    </group>
    <group oor:name="Factory">
      <info>
        <desc>Describes an application module (a document factory, such as
        Writer).</desc>
      </info>
      <prop oor:name="ooSetupFactoryActualFilter" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>It's the "most actual" filter, which is able to import/export
          ALL currently implemented features of this office module. It has to be
          the programmatic name of the filter.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryActualTemplateFilter" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>The same meaning as ooSetupFactoryActualFilter ... but regarding
          to the actual template format.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryDefaultFilter" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the default file format for saving documents inside
          this office module.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryDocumentService" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>It's the service name of the document model used by this module.
          E.g. filter match against those service name.</desc>
        </info>
      </prop>
      <!--The default must be written by the setup.-->
      <prop oor:name="ooSetupFactoryShortName" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the short name of the factory.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryUIName" oor:type="xs:string" oor:localized="true">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the UI name of the factory.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryTemplateFile" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the name of the standard template file for the
          factory.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactorySystemDefaultTemplateChanged" oor:type="xs:boolean">
        <!-- UIHints: setup -->
        <info>
          <desc>Indicates if the system default template has been
          changed.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryWindowAttributes" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the attributes of the factory window</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryEmptyDocumentURL" oor:type="xs:string">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the URL for opening an empty document in the
          factory.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryIcon" oor:type="xs:int" oor:nillable="false">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the ID of the icon for the factory</desc>
        </info>
        <value>0</value>
      </prop>
      <prop oor:name="ooSetupFactoryStyleFilter" oor:type="xs:int" oor:nillable="false">
        <!-- UIHints: setup -->
        <info>
          <desc>Specifies the ID of the style filter (Stylist) for the
          factory</desc>
        </info>
        <value>-1</value>
      </prop>
      <prop oor:name="ooSetupFactoryCommandConfigRef" oor:type="xs:string">
        <info>
          <desc>Refer to a configuration file, which contains the list of UI
          commands, suitable for this module.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryWindowStateConfigRef" oor:type="xs:string">
        <info>
          <desc>Refer to a configuration file, which contains the persistent
          window data, suitable for this module.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryCmdCategoryConfigRef" oor:type="xs:string">
        <info>
          <desc>Refers to a configuration file which contains category
          definitions for user interface commands suitable for this
          module.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryHelpBaseURL" oor:type="xs:string">
        <info>
          <desc>Describe the base part of a help URL, which can be used to show
          the start help page according to the used office factory.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupFactoryHelpOnOpen" oor:type="xs:boolean">
        <info>
          <desc>Enable/disable automatic showing of the start help page for this
          office factory, if any document suitable for this factory is
          opened.</desc>
        </info>
        <!-- Attention: Because this feature must be enabled explicitly, we
             define the following:
             a) value = NIL        => feature disabled
             b) value = false/true => feature enabled but inactive/active
             default = a) => no value inside xcs!
        -->
      </prop>
    </group>
  </templates>
  <component>
    <group oor:name="Product">
      <info>
        <desc>Contains common product and version information</desc>
      </info>
      <!--The default must be written by the setup.-->
      <prop oor:name="ooName" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the name of a product.</desc>
        </info>
        <value/>
        <!-- JB: Empty default inserted into empty property node. Remove if NIL
             was intended -->
      </prop>
      <prop oor:name="ooSetupVersion" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the version number of the product that appears on the
          user interface.</desc>
        </info>
        <value/>
        <!-- JB: Empty default inserted into empty property node. Remove if NIL
             was intended -->
      </prop>
      <prop oor:name="ooSetupLastVersion" oor:type="xs:string" oor:nillable="true">
        <info>
          <desc>Specifies the version number of the previously used product for
          whats-new comparison.</desc>
        </info>
      </prop>
      <prop oor:name="ooSetupVersionAboutBox" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the complete (major.minor.micro) version number of the
          product that appears only on the about box.</desc>
        </info>
        <value/>
      </prop>
      <prop oor:name="ooSetupVersionAboutBoxSuffix" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the version suffix (beta1, rc2) of the product that
          appears only on the about box.</desc>
        </info>
        <value/>
      </prop>
      <prop oor:name="ooVendor" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the vendor who build the product.</desc>
        </info>
        <value/>
      </prop>
      <prop oor:name="ooSetupExtension" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the version number that appears on the user
          interface.</desc>
        </info>
        <value/>
        <!-- JB: Empty default inserted into empty property node. Remove if NIL
             was intended -->
      </prop>
      <prop oor:name="LastTimeGetInvolvedShown" oor:type="xs:long" oor:nillable="false">
          <info>
              <desc>The last time when the Get Involved infobar was shown.</desc>
          </info>
          <value>0</value>
      </prop>
      <prop oor:name="LastTimeDonateShown" oor:type="xs:long" oor:nillable="false">
          <info>
              <desc>The last time when the Donate infobar was shown.</desc>
          </info>
          <value>0</value>
      </prop>
    </group>
    <group oor:name="Office">
      <!--The default must be written by the setup.-->
      <info>
        <desc>Specifies the installation location, locales and the available
        factories for creating documents.</desc>
      </info>
      <prop oor:name="ooSetupInstCompleted" oor:type="xs:boolean" oor:nillable="false">
        <info>
          <desc>Indicates if the user data is copied successfully.</desc>
        </info>
        <value>false</value>
      </prop>
      <set oor:name="InstalledLocales" oor:node-type="InstalledLocale">
        <info>
          <desc>Enumerates the application languages that are installed, if a
          multilingual version is used.</desc>
        </info>
      </set>
      <prop oor:name="ooSetupConnectionURL" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>Specifies the URL for a UNO connection that can be used to
          script the office from outside.</desc>
        </info>
        <value/>
        <!-- JB: Empty default inserted into empty property node. Remove if NIL
             was intended -->
      </prop>
      <prop oor:name="MigrationCompleted" oor:type="xs:boolean" oor:nillable="false">
        <info>
          <desc>This should be set to true, as soon as settings from another
          version have been imported into this installation in order to prevent
          multiple migrations</desc>
        </info>
        <value>false</value>
      </prop>
      <prop oor:name="LastCompatibilityCheckID" oor:type="xs:string" oor:nillable="false">
        <info>
          <desc>The build ID of the office. On startup the office will compare
          this ID with the current build id to decide if the extensions
          dependencies need to be checked.</desc>
        </info>
        <value>not checked</value>
      </prop>
      <set oor:name="Factories" oor:node-type="Factory">
        <info>
          <desc>Contains all of the document factories that were installed
          during setup.</desc>
        </info>
      </set>
      <prop oor:name="OfficeRestartInProgress" oor:type="xs:boolean" oor:nillable="false">
        <info>
          <desc>The entry specifies that we are in restart process</desc>
        </info>
        <value>false</value>
      </prop>
    </group>
    <group oor:name="L10N">
      <info>
        <desc>Specifies the installation locales.</desc>
      </info>
      <!--The default must be written by the setup.-->
      <prop oor:name="ooLocale" oor:type="xs:string" oor:nillable="false">
        <!-- UIHints: Tools - Options - General - Other -->
        <!--The initial default should be written by the setup.-->
        <info>
          <desc>Indicates the Office language selected by the user.</desc>
          <label>Locale</label>
        </info>
        <value/>
      </prop>
      <prop oor:name="ooSetupSystemLocale" oor:type="xs:string" oor:nillable="false">
        <!-- UIHints: Tools - Options - Languages and Locales - General - Language
             of - Locale setting -->
        <info>
          <desc>Indicates the locale setting defined by the user. By default,
          this label is empty and the system locale is used.</desc>
        </info>
        <value/>
        <!-- JB: Empty default inserted into empty property node. Remove if NIL
             was intended -->
      </prop>
      <prop oor:name="ooSetupCurrency" oor:type="xs:string" oor:nillable="false">
        <!-- UIHints: Tools - Options - Languages and Locales - General - Language
             of - Default currency -->
        <info>
          <desc>Indicates the currency settings defined by the user. By default,
          this label is empty and the currency defined in the
          ooSetupSystemLocale is used.</desc>
        </info>
        <value/>
        <!-- JB: Empty default inserted into empty property node. Remove if NIL
             was intended -->
      </prop>
      <prop oor:name="DecimalSeparatorAsLocale" oor:type="xs:boolean" oor:nillable="false">
        <info>
          <desc>Indicates that the decimal separator (dot or comma) is used as
          appropriate for the selected locale instead of the one related to the
          default keyboard layout.</desc>
          <label>Decimal separator key same as locale setting.</label>
        </info>
        <value>true</value>
      </prop>
      <prop oor:name="IgnoreLanguageChange" oor:type="xs:boolean" oor:nillable="false">
        <info>
          <desc>Indicates whether changes to the system input language/keyboard
          will be ignored. If ignored, when new text is typed that text will
          follow the language of the document or current paragraph, not the
          current system language.</desc>
          <label>Ignore system input language.</label>
        </info>
        <value>false</value>
      </prop>
      <prop oor:name="DateAcceptancePatterns" oor:type="xs:string" oor:nillable="true">
        <!-- UIHints: Tools - Options - Languages and Locales - General - Language
             of - Date acceptance patterns -->
        <info>
          <desc>Indicates the date acceptance patterns defined by the user. By
          default, this label is empty and the patterns defined in the
          ooSetupSystemLocale are used.</desc>
        </info>
        <value/>
      </prop>
    </group>
    <group oor:name="Migration">
      <info>
        <desc>Contains settings that control the migration process for certain
        versions.</desc>
      </info>
      <set oor:name="SupportedVersions" oor:node-type="MigrateVersion">
        <info>
          <desc>Define migration steps for supported versions</desc>
        </info>
      </set>
    </group>
  </component>
</oor:component-schema>