path: root/xmloff/source/draw/ximpcustomshape.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include "ximpcustomshape.hxx"
#include <o3tl/any.hxx>
#include <rtl/math.hxx>
#include <rtl/ustrbuf.hxx>
#include <rtl/ustring.hxx>
#include <com/sun/star/uno/Reference.h>
#include <com/sun/star/awt/Rectangle.hpp>
#include <com/sun/star/xml/sax/XAttributeList.hpp>
#include <xmloff/xmltoken.hxx>
#include <EnhancedCustomShapeToken.hxx>
#include <xmloff/xmlimp.hxx>
#include <xmloff/namespacemap.hxx>
#include <xmloff/xmluconv.hxx>
#include <xmloff/xmlement.hxx>
#include <xexptran.hxx>
#include <com/sun/star/drawing/Direction3D.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeParameterPair.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeParameterType.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeTextFrame.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeSegment.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeSegmentCommand.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeTextPathMode.hpp>
#include <com/sun/star/drawing/EnhancedCustomShapeMetalType.hpp>
#include <com/sun/star/drawing/ProjectionMode.hpp>
#include <com/sun/star/drawing/Position3D.hpp>
#include <sax/tools/converter.hxx>
#include <comphelper/sequence.hxx>
#include <o3tl/string_view.hxx>
#include <memory>
#include <string_view>
#include <unordered_map>

using namespace ::com::sun::star;
using namespace ::xmloff::token;
using namespace ::xmloff::EnhancedCustomShapeToken;


XMLEnhancedCustomShapeContext::XMLEnhancedCustomShapeContext( SvXMLImport& rImport,
            css::uno::Reference< css::drawing::XShape >& rxShape,
            std::vector< css::beans::PropertyValue >& rCustomShapeGeometry ) :
        SvXMLImportContext( rImport ),
        mrUnitConverter( rImport.GetMM100UnitConverter() ),
        mrxShape( rxShape ),
        mrCustomShapeGeometry( rCustomShapeGeometry )
{
}

const SvXMLEnumMapEntry<sal_uInt16> aXML_GluePointEnumMap[] =
{
    { XML_NONE,         0 },
    { XML_SEGMENTS,     1 },
    { XML_NONE,         2 },
    { XML_RECTANGLE,    3 },
    { XML_TOKEN_INVALID, 0 }
};
static void GetBool( std::vector< css::beans::PropertyValue >& rDest,
                        std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    bool bAttrBool;
    if (::sax::Converter::convertBool( bAttrBool, rValue ))
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= bAttrBool;
        rDest.push_back( aProp );
    }
}

static void GetInt32( std::vector< css::beans::PropertyValue >& rDest,
                        std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    sal_Int32 nAttrNumber;
    if (::sax::Converter::convertNumber( nAttrNumber, rValue ))
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= nAttrNumber;
        rDest.push_back( aProp );
    }
}

static void GetDouble( std::vector< css::beans::PropertyValue >& rDest,
                        std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    double fAttrDouble;
    if (::sax::Converter::convertDouble( fAttrDouble, rValue ))
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= fAttrDouble;
        rDest.push_back( aProp );
    }
}

static void GetString( std::vector< css::beans::PropertyValue >& rDest,
                        const OUString& rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    beans::PropertyValue aProp;
    aProp.Name = EASGet( eDestProp );
    aProp.Value <<= rValue;
    rDest.push_back( aProp );
}

template<typename EnumT>
static void GetEnum( std::vector< css::beans::PropertyValue >& rDest,
                         std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp,
                        const SvXMLEnumMapEntry<EnumT>& rMap )
{
    EnumT eKind;
    if( SvXMLUnitConverter::convertEnum( eKind, rValue, &rMap ) )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= static_cast<sal_Int16>(eKind);
        rDest.push_back( aProp );
    }
}

static void GetDoublePercentage( std::vector< css::beans::PropertyValue >& rDest,
                         std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    sal_Int16 const eSrcUnit = ::sax::Converter::GetUnitFromString(
            rValue, util::MeasureUnit::MM_100TH);
    if (util::MeasureUnit::PERCENT != eSrcUnit)
        return;

    rtl_math_ConversionStatus eStatus;
    double fAttrDouble = rtl_math_stringToDouble(rValue.data(),
                                             rValue.data() + rValue.size(),
                                             '.', ',', &eStatus, nullptr);
    if ( eStatus == rtl_math_ConversionStatus_Ok )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= fAttrDouble;
        rDest.push_back( aProp );
    }
}

static void GetB3DVector( std::vector< css::beans::PropertyValue >& rDest,
                         std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    ::basegfx::B3DVector aB3DVector;
    if ( SvXMLUnitConverter::convertB3DVector( aB3DVector, rValue ) )
    {
        drawing::Direction3D aDirection3D( aB3DVector.getX(), aB3DVector.getY(), aB3DVector.getZ() );
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= aDirection3D;
        rDest.push_back( aProp );
    }
}

static bool GetEquationName( std::u16string_view rEquation, const sal_Int32 nStart, OUString& rEquationName )
{
    sal_Int32 nIndex = nStart;
    while( nIndex < static_cast<sal_Int32>(rEquation.size()) )
    {
        sal_Unicode nChar = rEquation[ nIndex ];
        if (
            ( ( nChar >= 'a' ) && ( nChar <= 'z' ) )
            || ( ( nChar >= 'A' ) && ( nChar <= 'Z' ) )
            || ( ( nChar >= '0' ) && ( nChar <= '9' ) )
            )
        {
            nIndex++;
        }
        else
            break;
    }
    bool bValid = ( nIndex - nStart ) != 0;
    if ( bValid )
        rEquationName = rEquation.substr( nStart, nIndex - nStart );
    return bValid;
}

static bool GetNextParameter( css::drawing::EnhancedCustomShapeParameter& rParameter, sal_Int32& nIndex, std::u16string_view rParaString )
{
    if ( nIndex >= static_cast<sal_Int32>(rParaString.size()) )
        return false;

    bool bValid = true;
    bool bNumberRequired = true;
    bool bMustBePositiveWholeNumbered = false;

    rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::NORMAL;
    if ( rParaString[ nIndex ] == '$' )
    {
        rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::ADJUSTMENT;
        bMustBePositiveWholeNumbered = true;
        nIndex++;
    }
    else if ( rParaString[ nIndex ] == '?' )
    {
        nIndex++;
        bNumberRequired = false;
        OUString aEquationName;
        bValid = GetEquationName( rParaString, nIndex, aEquationName );
        if ( bValid )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::EQUATION;
            rParameter.Value <<= aEquationName;
            nIndex += aEquationName.getLength();
        }
    }
    else if ( rParaString[ nIndex ] > '9' )
    {
        bNumberRequired = false;
        if ( o3tl::matchIgnoreAsciiCase( rParaString, u"left", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::LEFT;
            nIndex += 4;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"top", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::TOP;
            nIndex += 3;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"right", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::RIGHT;
            nIndex += 5;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"bottom", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::BOTTOM;
            nIndex += 6;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"xstretch", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::XSTRETCH;
            nIndex += 8;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"ystretch", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::YSTRETCH;
            nIndex += 8;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"hasstroke", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::HASSTROKE;
            nIndex += 9;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"hasfill", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::HASFILL;
            nIndex += 7;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"width", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::WIDTH;
            nIndex += 5;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"height", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::HEIGHT;
            nIndex += 6;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"logwidth", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::LOGWIDTH;
            nIndex += 8;
        }
        else if ( o3tl::matchIgnoreAsciiCase( rParaString, u"logheight", nIndex ) )
        {
            rParameter.Type = css::drawing::EnhancedCustomShapeParameterType::LOGHEIGHT;
            nIndex += 9;
        }
        else
            bValid = false;
    }
    if ( bValid )
    {
        if ( bNumberRequired )
        {
            sal_Int32 nStartIndex = nIndex;
            sal_Int32 nEIndex = 0;  // index of "E" in double

            bool bE = false;    // set if a double is including a "E" statement
            bool bENum = false; // there is at least one number after "E"
            bool bDot = false;  // set if there is a dot included
            bool bEnd = false;  // set for each value that can not be part of a double/integer

            while( ( nIndex < static_cast<sal_Int32>(rParaString.size()) ) && bValid )
            {
                switch( rParaString[ nIndex ] )
                {
                    case '.' :
                    {
                        if ( bMustBePositiveWholeNumbered )
                            bValid = false;
                        else
                        {
                            if ( bDot )
                                bValid = false;
                            else
                                bDot = true;
                        }
                    }
                    break;
                    case '-' :
                    {
                        if ( bMustBePositiveWholeNumbered )
                            bValid = false;
                        else
                        {
                            if ( nStartIndex == nIndex )
                               bValid = true;
                            else if ( bE )
                            {
                                if ( nEIndex + 1 == nIndex )
                                    bValid = true;
                                else if ( bENum )
                                    bEnd = true;
                                else
                                    bValid = false;
                            }
                        }
                    }
                    break;

                    case 'e' :
                    case 'E' :
                    {
                        if ( bMustBePositiveWholeNumbered )
                            bEnd = true;
                        else
                        {
                            if ( !bE )
                            {
                                bE = true;
                                nEIndex = nIndex;
                            }
                            else
                                bEnd = true;
                        }
                    }
                    break;
                    case '0' :
                    case '1' :
                    case '2' :
                    case '3' :
                    case '4' :
                    case '5' :
                    case '6' :
                    case '7' :
                    case '8' :
                    case '9' :
                    {
                        if ( bE && ! bENum )
                            bENum = true;
                    }
                    break;
                    default:
                        bEnd = true;
                }
                if ( !bEnd )
                    nIndex++;
                else
                    break;
            }
            if ( nIndex == nStartIndex )
                bValid = false;
            if ( bValid )
            {
                std::u16string_view aNumber( rParaString.substr( nStartIndex, nIndex - nStartIndex ) );
                if ( bE || bDot )
                {
                    double fAttrDouble;
                    if (::sax::Converter::convertDouble(fAttrDouble, aNumber))
                        rParameter.Value <<= fAttrDouble;
                    else
                        bValid = false;
                }
                else
                {
                    sal_Int32 nValue;
                    if (::sax::Converter::convertNumber(nValue, aNumber))
                        rParameter.Value <<= nValue;
                    else
                        bValid = false;
                }
            }
        }
    }
    if ( bValid )
    {
        // skipping white spaces and commas (#i121507#)
        const sal_Unicode aSpace(' ');
        const sal_Unicode aCommata(',');

        while(nIndex < static_cast<sal_Int32>(rParaString.size()))
        {
            const sal_Unicode aCandidate(rParaString[nIndex]);

            if(aSpace == aCandidate || aCommata == aCandidate)
            {
                nIndex++;
            }
            else
            {
                break;
            }
        }
    }
    return bValid;
}

static void GetPosition3D( std::vector< css::beans::PropertyValue >& rDest,                     // e.g. draw:extrusion-viewpoint
                        std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp,
                        const SvXMLUnitConverter& rUnitConverter )
{
    drawing::Position3D aPosition3D;
    if ( rUnitConverter.convertPosition3D( aPosition3D, rValue ) )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= aPosition3D;
        rDest.push_back( aProp );
    }
}

static void GetDoubleSequence( std::vector< css::beans::PropertyValue >& rDest,                 // e.g. draw:glue-point-leaving-directions
                        std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    std::vector< double > vDirection;
    sal_Int32 nIndex = 0;
    do
    {
        double fAttrDouble;
        std::string_view aToken( o3tl::getToken(rValue, 0, ',', nIndex ) );
        if (!::sax::Converter::convertDouble( fAttrDouble, aToken ))
            break;
        else
            vDirection.push_back( fAttrDouble );
    }
    while ( nIndex >= 0 );

    if ( !vDirection.empty() )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= comphelper::containerToSequence(vDirection);
        rDest.push_back( aProp );
    }
}

static void GetSizeSequence( std::vector< css::beans::PropertyValue >& rDest,
                      std::string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    std::vector< sal_Int32 > vNum;
    sal_Int32 nIndex = 0;
    do
    {
        sal_Int32 n;
        std::string_view aToken( o3tl::getToken(rValue, 0, ' ', nIndex ) );
        if (!::sax::Converter::convertNumber( n, aToken ))
            break;
        else
            vNum.push_back( n );
    }
    while ( nIndex >= 0 );

    if ( vNum.empty() )
        return;

    uno::Sequence< awt::Size > aSizeSeq((vNum.size() + 1) / 2);
    std::vector< sal_Int32 >::const_iterator aIter = vNum.begin();
    std::vector< sal_Int32 >::const_iterator aEnd = vNum.end();
    awt::Size* pValues = aSizeSeq.getArray();

    while ( aIter != aEnd ) {
        pValues->Width = *aIter++;
        if ( aIter != aEnd )
            pValues->Height = *aIter++;
        pValues ++;
    }

    beans::PropertyValue aProp;
    aProp.Name = EASGet( eDestProp );
    aProp.Value <<= aSizeSeq;
    rDest.push_back( aProp );
}

static void GetEnhancedParameter( std::vector< css::beans::PropertyValue >& rDest,              // e.g. draw:handle-position
                        std::u16string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    sal_Int32 nIndex = 0;
    css::drawing::EnhancedCustomShapeParameter aParameter;
    if ( GetNextParameter( aParameter, nIndex, rValue ) )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= aParameter;
        rDest.push_back( aProp );
    }
}

static void GetEnhancedParameterPair( std::vector< css::beans::PropertyValue >& rDest,          // e.g. draw:handle-position
                        std::u16string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    sal_Int32 nIndex = 0;
    css::drawing::EnhancedCustomShapeParameterPair aParameterPair;
    if ( GetNextParameter( aParameterPair.First, nIndex, rValue )
        && GetNextParameter( aParameterPair.Second, nIndex, rValue ) )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= aParameterPair;
        rDest.push_back( aProp );
    }
}

static sal_Int32 GetEnhancedParameterPairSequence( std::vector< css::beans::PropertyValue >& rDest,     // e.g. draw:glue-points
                        std::u16string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    std::vector< css::drawing::EnhancedCustomShapeParameterPair > vParameter;
    css::drawing::EnhancedCustomShapeParameterPair aParameter;

    sal_Int32 nIndex = 0;
    while ( GetNextParameter( aParameter.First, nIndex, rValue )
            && GetNextParameter( aParameter.Second, nIndex, rValue ) )
    {
        vParameter.push_back( aParameter );
    }
    if ( !vParameter.empty() )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= comphelper::containerToSequence(vParameter);
        rDest.push_back( aProp );
    }
    return vParameter.size();
}

static void GetEnhancedRectangleSequence( std::vector< css::beans::PropertyValue >& rDest,      // e.g. draw:text-areas
                        std::u16string_view rValue, const EnhancedCustomShapeTokenEnum eDestProp )
{
    std::vector< css::drawing::EnhancedCustomShapeTextFrame > vTextFrame;
    css::drawing::EnhancedCustomShapeTextFrame aParameter;

    sal_Int32 nIndex = 0;

    while ( GetNextParameter( aParameter.TopLeft.First, nIndex, rValue )
            && GetNextParameter( aParameter.TopLeft.Second, nIndex, rValue )
            && GetNextParameter( aParameter.BottomRight.First, nIndex, rValue )
            && GetNextParameter( aParameter.BottomRight.Second, nIndex, rValue ) )
    {
        vTextFrame.push_back( aParameter );
    }
    if ( !vTextFrame.empty() )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( eDestProp );
        aProp.Value <<= comphelper::containerToSequence(vTextFrame);
        rDest.push_back( aProp );
    }
}

static void
GetEnhancedPath(std::vector<css::beans::PropertyValue>& rDest, // e.g. draw:enhanced-path
                std::u16string_view rValue, std::u16string_view rType)
{
    std::vector< css::drawing::EnhancedCustomShapeParameterPair >    vCoordinates;
    std::vector< css::drawing::EnhancedCustomShapeSegment >      vSegments;

    sal_Int32 nIndex = 0;
    sal_Int32 nParameterCount = 0;

    sal_Int32 nParametersNeeded = 1;
    sal_Int16 nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO;

    bool bValid = true;

    while( bValid && ( nIndex < static_cast<sal_Int32>(rValue.size()) ) )
    {
        switch( rValue[ nIndex ] )
        {
            case 'M' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO;
                nParametersNeeded = 1;
                nIndex++;
            }
            break;
            case 'L' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::LINETO;
                nParametersNeeded = 1;
                nIndex++;
            }
            break;
            case 'C' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::CURVETO;
                nParametersNeeded = 3;
                nIndex++;
            }
            break;
            case 'Z' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::CLOSESUBPATH;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'N' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ENDSUBPATH;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'F' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::NOFILL;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'S' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::NOSTROKE;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'T' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ANGLEELLIPSETO;
                nParametersNeeded = 3;
                nIndex++;
            }
            break;
            case 'U' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ANGLEELLIPSE;
                nParametersNeeded = 3;
                nIndex++;
            }
            break;
            case 'A' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ARCTO;
                nParametersNeeded = 4;
                nIndex++;
            }
            break;
            case 'B' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ARC;
                nParametersNeeded = 4;
                nIndex++;
            }
            break;
            case 'G' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ARCANGLETO;
                nParametersNeeded = 2;
                nIndex++;
            }
            break;
            case 'H' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::DARKEN;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'I' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::DARKENLESS;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'J' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::LIGHTEN;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'K' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::LIGHTENLESS;
                nParametersNeeded = 0;
                nIndex++;
            }
            break;
            case 'W' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO;
                nParametersNeeded = 4;
                nIndex++;
            }
            break;
            case 'V' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARC;
                nParametersNeeded = 4;
                nIndex++;
            }
            break;
            case 'X' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTX;
                nParametersNeeded = 1;
                nIndex++;
            }
            break;
            case 'Y' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::ELLIPTICALQUADRANTY;
                nParametersNeeded = 1;
                nIndex++;
            }
            break;
            case 'Q' :
            {
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::QUADRATICCURVETO;
                nParametersNeeded = 2;
                nIndex++;
            }
            break;
            case ' ' :
            {
                nIndex++;
            }
            break;

            case '$' :
            case '?' :
            case '0' :
            case '1' :
            case '2' :
            case '3' :
            case '4' :
            case '5' :
            case '6' :
            case '7' :
            case '8' :
            case '9' :
            case '.' :
            case '-' :
            {
                css::drawing::EnhancedCustomShapeParameterPair aPair;
                if ( GetNextParameter( aPair.First, nIndex, rValue ) &&
                        GetNextParameter( aPair.Second, nIndex, rValue ) )
                {
                    vCoordinates.push_back( aPair );
                    nParameterCount++;
                }
                else
                    bValid = false;
            }
            break;
            default:
                nIndex++;
            break;
        }
        if ( !nParameterCount && !nParametersNeeded )
        {
            css::drawing::EnhancedCustomShapeSegment aSegment;
            aSegment.Command = nLatestSegmentCommand;
            aSegment.Count = 0;
            vSegments.push_back( aSegment );
            nParametersNeeded = 0x7fffffff;
        }
        else if ( nParameterCount >= nParametersNeeded )
        {
            // Special rule for moveto in ODF 1.2 section 19.145
            // "If a moveto is followed by multiple pairs of coordinates, they are treated as lineto."
            if ( nLatestSegmentCommand == css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO )
            {
                css::drawing::EnhancedCustomShapeSegment aSegment;
                aSegment.Command = css::drawing::EnhancedCustomShapeSegmentCommand::MOVETO;
                aSegment.Count = 1;
                vSegments.push_back( aSegment );
                nIndex--;
                nLatestSegmentCommand = css::drawing::EnhancedCustomShapeSegmentCommand::LINETO;
                nParametersNeeded = 1;
            }
            else
            {
                // General rule in ODF 1.2. section 19.145
                // "If a command is repeated multiple times, all repeated command characters
                // except the first one may be omitted." Thus check if the last command is identical,
                // if so, we just need to increment the count
                if ( !vSegments.empty() && ( vSegments[ vSegments.size() - 1 ].Command == nLatestSegmentCommand ) )
                    vSegments[ vSegments.size() -1 ].Count++;
                else
                {
                    css::drawing::EnhancedCustomShapeSegment aSegment;
                    aSegment.Command = nLatestSegmentCommand;
                    aSegment.Count = 1;
                    vSegments.push_back( aSegment );
                }
            }
            nParameterCount = 0;
        }
    }

    // Corrections for wrong paths in curvedArrow shapes written by older LO versions
    if (!vSegments.empty()
        && (rType == u"mso-spt102" || rType == u"mso-spt103" || rType == u"mso-spt104"
            || rType == u"mso-spt105")
        && vSegments[0].Count == 2)
    {
        vSegments[0].Count = 1;
        css::drawing::EnhancedCustomShapeSegment aSegment;
        aSegment.Count = 1;
        aSegment.Command
            = vSegments[0].Command == css::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARC
                  ? css::drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO
                  : css::drawing::EnhancedCustomShapeSegmentCommand::ARCTO;
        vSegments.insert(vSegments.begin() + 1, aSegment);
    }

    // adding the Coordinates property
    beans::PropertyValue aProp;
    aProp.Name = EASGet( EAS_Coordinates );
    aProp.Value <<= comphelper::containerToSequence(vCoordinates);
    rDest.push_back( aProp );

    // adding the Segments property
    aProp.Name = EASGet( EAS_Segments );
    aProp.Value <<= comphelper::containerToSequence(vSegments);
    rDest.push_back( aProp );
}

static void GetAdjustmentValues( std::vector< css::beans::PropertyValue >& rDest,               // draw:adjustments
                        std::u16string_view rValue )
{
    std::vector< css::drawing::EnhancedCustomShapeAdjustmentValue > vAdjustmentValue;
    css::drawing::EnhancedCustomShapeParameter aParameter;
    sal_Int32 nIndex = 0;
    while ( GetNextParameter( aParameter, nIndex, rValue ) )
    {
        css::drawing::EnhancedCustomShapeAdjustmentValue aAdj;
        if ( aParameter.Type == css::drawing::EnhancedCustomShapeParameterType::NORMAL )
        {
            aAdj.Value = aParameter.Value;
            aAdj.State = beans::PropertyState_DIRECT_VALUE;
        }
        else
            aAdj.State = beans::PropertyState_DEFAULT_VALUE;    // this should not be, but better than setting nothing

        vAdjustmentValue.push_back( aAdj );
    }

    sal_Int32 nAdjustmentValues = vAdjustmentValue.size();
    if ( nAdjustmentValues )
    {
        beans::PropertyValue aProp;
        aProp.Name = EASGet( EAS_AdjustmentValues );
        aProp.Value <<= comphelper::containerToSequence(vAdjustmentValue);
        rDest.push_back( aProp );
    }
}

void XMLEnhancedCustomShapeContext::startFastElement(
    sal_Int32 /*nElement*/,
    const css::uno::Reference< css::xml::sax::XFastAttributeList >& xAttrList )
{
    sal_Int32               nAttrNumber;
    std::optional<std::string_view> oSpecularityValue; // for postpone extrusion-specularity
    std::optional<OUString> oPathValue; // for postpone GetEnhancedPath;
    OUString sType("non-primitive"); // default in ODF
    for( auto& aIter : sax_fastparser::castToFastAttributeList(xAttrList) )
    {
        switch( EASGet( aIter.getToken() ) )
        {
            case EAS_type :
            {
                sType = aIter.toString();
                GetString( mrCustomShapeGeometry, sType, EAS_Type );
            }
            break;
            case EAS_mirror_horizontal :
                GetBool( mrCustomShapeGeometry, aIter.toView(), EAS_MirroredX );
            break;
            case EAS_mirror_vertical :
                GetBool( mrCustomShapeGeometry, aIter.toView(), EAS_MirroredY );
            break;
            case EAS_viewBox :
            {
                SdXMLImExViewBox aViewBox( aIter.toString(), GetImport().GetMM100UnitConverter() );
                awt::Rectangle aRect( aViewBox.GetX(), aViewBox.GetY(), aViewBox.GetWidth(), aViewBox.GetHeight() );
                beans::PropertyValue aProp;
                aProp.Name = EASGet( EAS_ViewBox );
                aProp.Value <<= aRect;
                mrCustomShapeGeometry.push_back( aProp );
            }
            break;
            case EAS_sub_view_size:
                GetSizeSequence( maPath, aIter.toView(), EAS_SubViewSize );
            break;
            case EAS_text_rotate_angle :
                GetDouble( mrCustomShapeGeometry, aIter.toView(), EAS_TextRotateAngle );
            break;
            case EAS_extrusion_allowed :
                GetBool( maPath, aIter.toView(), EAS_ExtrusionAllowed );
            break;
            case EAS_text_path_allowed :
                GetBool( maPath, aIter.toView(), EAS_TextPathAllowed );
            break;
            case EAS_concentric_gradient_fill_allowed :
                GetBool( maPath, aIter.toView(), EAS_ConcentricGradientFillAllowed );
            break;
            case EAS_extrusion :
                GetBool( maExtrusion, aIter.toView(), EAS_Extrusion );
            break;
            case EAS_extrusion_brightness :
                GetDoublePercentage( maExtrusion, aIter.toView(), EAS_Brightness );
            break;
            case EAS_extrusion_depth :
            {
                OUString rValue = aIter.toString();
                sal_Int32 nIndex = 0;
                css::drawing::EnhancedCustomShapeParameterPair aParameterPair;
                css::drawing::EnhancedCustomShapeParameter& rDepth = aParameterPair.First;
                if ( GetNextParameter( rDepth, nIndex, rValue ) )
                {
                    css::drawing::EnhancedCustomShapeParameter& rFraction = aParameterPair.Second;
                    // try to catch the unit for the depth
                    sal_Int16 const eSrcUnit(
                        ::sax::Converter::GetUnitFromString(
                            rValue, util::MeasureUnit::MM_100TH));

                    OUStringBuffer aUnitStr;
                    double fFactor = ::sax::Converter::GetConversionFactor(
                        aUnitStr, util::MeasureUnit::MM_100TH, eSrcUnit);
                    if ( ( fFactor != 1.0 ) && ( fFactor != 0.0 ) )
                    {
                        double fDepth(0.0);
                        if ( rDepth.Value >>= fDepth )
                        {
                            fDepth /= fFactor;
                            rDepth.Value <<= fDepth;
                        }
                    }
                    if ( rValue.matchIgnoreAsciiCase( aUnitStr, nIndex ) )
                        nIndex += aUnitStr.getLength();

                    // skipping white spaces
                    while( ( nIndex < rValue.getLength() ) && rValue[ nIndex ] == ' ' )
                        nIndex++;

                    if ( GetNextParameter( rFraction, nIndex, rValue ) )
                    {
                        beans::PropertyValue aProp;
                        aProp.Name = EASGet( EAS_Depth );
                        aProp.Value <<= aParameterPair;
                        maExtrusion.push_back( aProp );
                    }
                }
            }
            break;
            case EAS_extrusion_diffusion :
                GetDoublePercentage( maExtrusion, aIter.toView(), EAS_Diffusion );
            break;
            case EAS_extrusion_number_of_line_segments :
                GetInt32( maExtrusion, aIter.toView(), EAS_NumberOfLineSegments );
            break;
            case EAS_extrusion_light_face :
                GetBool( maExtrusion, aIter.toView(), EAS_LightFace );
            break;
            case EAS_extrusion_first_light_harsh :
                GetBool( maExtrusion, aIter.toView(), EAS_FirstLightHarsh );
            break;
            case EAS_extrusion_second_light_harsh :
                GetBool( maExtrusion, aIter.toView(), EAS_SecondLightHarsh );
            break;
            case EAS_extrusion_first_light_level :
                GetDoublePercentage( maExtrusion, aIter.toView(), EAS_FirstLightLevel );
            break;
            case EAS_extrusion_second_light_level :
                GetDoublePercentage( maExtrusion, aIter.toView(), EAS_SecondLightLevel );
            break;
            case EAS_extrusion_first_light_direction :
                GetB3DVector( maExtrusion, aIter.toView(), EAS_FirstLightDirection );
            break;
            case EAS_extrusion_second_light_direction :
                GetB3DVector( maExtrusion, aIter.toView(), EAS_SecondLightDirection );
            break;
            case EAS_extrusion_metal :
                GetBool( maExtrusion, aIter.toView(), EAS_Metal );
            break;
            case EAS_extrusion_metal_type :
            {
                OUString rValue = aIter.toString();
                sal_Int16 eMetalType(drawing::EnhancedCustomShapeMetalType::MetalODF);
                if (rValue == "loext:MetalMSCompatible")
                    eMetalType = drawing::EnhancedCustomShapeMetalType::MetalMSCompatible;
                beans::PropertyValue aProp;
                aProp.Name = EASGet(EAS_MetalType);
                aProp.Value <<= eMetalType;
                maExtrusion.push_back(aProp);
            }
            break;
            case EAS_shade_mode :
            {
                drawing::ShadeMode eShadeMode( drawing::ShadeMode_FLAT );
                if( IsXMLToken( aIter, XML_PHONG ) )
                    eShadeMode = drawing::ShadeMode_PHONG;
                else if ( IsXMLToken( aIter, XML_GOURAUD ) )
                    eShadeMode = drawing::ShadeMode_SMOOTH;
                else if ( IsXMLToken( aIter, XML_DRAFT ) )
                    eShadeMode = drawing::ShadeMode_DRAFT;

                beans::PropertyValue aProp;
                aProp.Name = EASGet( EAS_ShadeMode );
                aProp.Value <<= eShadeMode;
                maExtrusion.push_back( aProp );
            }
            break;
            case EAS_extrusion_rotation_angle :
                GetEnhancedParameterPair( maExtrusion, aIter.toString(), EAS_RotateAngle );
            break;
            case EAS_extrusion_rotation_center :
                GetB3DVector( maExtrusion, aIter.toView(), EAS_RotationCenter );
            break;
            case EAS_extrusion_shininess :
                GetDoublePercentage( maExtrusion, aIter.toView(), EAS_Shininess );
            break;
            case EAS_extrusion_skew :
                GetEnhancedParameterPair( maExtrusion, aIter.toString(), EAS_Skew );
            break;
            case EAS_extrusion_specularity :
                if (!oSpecularityValue)
                    oSpecularityValue = aIter.toView();
            break;
            case EAS_extrusion_specularity_loext :
                oSpecularityValue = aIter.toView();
            break;
            case EAS_projection :
            {
                drawing::ProjectionMode eProjectionMode( drawing::ProjectionMode_PERSPECTIVE );
                if( IsXMLToken( aIter, XML_PARALLEL ) )
                    eProjectionMode = drawing::ProjectionMode_PARALLEL;

                beans::PropertyValue aProp;
                aProp.Name = EASGet( EAS_ProjectionMode );
                aProp.Value <<= eProjectionMode;
                maExtrusion.push_back( aProp );
            }
            break;
            case EAS_extrusion_viewpoint :
                GetPosition3D( maExtrusion, aIter.toView(), EAS_ViewPoint, mrUnitConverter );
            break;
            case EAS_extrusion_origin :
                GetEnhancedParameterPair( maExtrusion, aIter.toString(), EAS_Origin );
            break;
            case EAS_extrusion_color :
                GetBool( maExtrusion, aIter.toView(), EAS_Color );
            break;
            case EAS_enhanced_path :
                oPathValue = aIter.toString();
            break;
            case EAS_path_stretchpoint_x :
            {
                if (::sax::Converter::convertNumber(nAttrNumber, aIter.toView()))
                {
                    beans::PropertyValue aProp;
                    aProp.Name = EASGet( EAS_StretchX );
                    aProp.Value <<= nAttrNumber;
                    maPath.push_back( aProp );
                }
            }
            break;
            case EAS_path_stretchpoint_y :
            {
                if (::sax::Converter::convertNumber(nAttrNumber, aIter.toView()))
                {
                    beans::PropertyValue aProp;
                    aProp.Name = EASGet( EAS_StretchY );
                    aProp.Value <<= nAttrNumber;
                    maPath.push_back( aProp );
                }
            }
            break;
            case EAS_text_areas :
                GetEnhancedRectangleSequence( maPath, aIter.toString(), EAS_TextFrames );
            break;
            case EAS_glue_points :
            {
                sal_Int32 i, nPairs = GetEnhancedParameterPairSequence( maPath, aIter.toString(), EAS_GluePoints );
                GetImport().GetShapeImport()->moveGluePointMapping( mrxShape, nPairs );
                for ( i = 0; i < nPairs; i++ )
                    GetImport().GetShapeImport()->addGluePointMapping( mrxShape, i + 4, i + 4 );
            }
            break;
            case EAS_glue_point_type :
                GetEnum( maPath, aIter.toView(), EAS_GluePointType, *aXML_GluePointEnumMap );
            break;
            case EAS_glue_point_leaving_directions :
                GetDoubleSequence( maPath, aIter.toView(), EAS_GluePointLeavingDirections );
            break;
            case EAS_text_path :
                GetBool( maTextPath, aIter.toView(), EAS_TextPath );
            break;
            case EAS_text_path_mode :
            {
                css::drawing::EnhancedCustomShapeTextPathMode eTextPathMode( css::drawing::EnhancedCustomShapeTextPathMode_NORMAL );
                if( IsXMLToken( aIter, XML_PATH ) )
                    eTextPathMode = css::drawing::EnhancedCustomShapeTextPathMode_PATH;
                else if ( IsXMLToken( aIter, XML_SHAPE ) )
                    eTextPathMode = css::drawing::EnhancedCustomShapeTextPathMode_SHAPE;

                beans::PropertyValue aProp;
                aProp.Name = EASGet( EAS_TextPathMode );
                aProp.Value <<= eTextPathMode;
                maTextPath.push_back( aProp );
            }
            break;
            case EAS_text_path_scale :
            {
                bool bScaleX = IsXMLToken( aIter, XML_SHAPE );
                beans::PropertyValue aProp;
                aProp.Name = EASGet( EAS_ScaleX );
                aProp.Value <<= bScaleX;
                maTextPath.push_back( aProp );
            }
            break;
            case EAS_text_path_same_letter_heights :
                GetBool( maTextPath, aIter.toView(), EAS_SameLetterHeights );
            break;
            case EAS_modifiers :
                GetAdjustmentValues( mrCustomShapeGeometry, aIter.toString() );
            break;
            default:
                break;
        }
    }
    if (oSpecularityValue)
        GetDoublePercentage( maExtrusion, *oSpecularityValue, EAS_Specularity );
    if (oPathValue)
        GetEnhancedPath(maPath, *oPathValue, sType);
}

static void SdXMLCustomShapePropertyMerge( std::vector< css::beans::PropertyValue >& rPropVec,
                                    const std::vector< beans::PropertyValues >& rElement,
                                        const OUString& rElementName )
{
    if ( !rElement.empty() )
    {
        beans::PropertyValue aProp;
        aProp.Name = rElementName;
        aProp.Value <<= comphelper::containerToSequence(rElement);
        rPropVec.push_back( aProp );
    }
}

static void SdXMLCustomShapePropertyMerge( std::vector< css::beans::PropertyValue >& rPropVec,
                                    const std::vector< OUString >& rElement,
                                        const OUString& rElementName )
{
    if ( !rElement.empty() )
    {
        beans::PropertyValue aProp;
        aProp.Name = rElementName;
        aProp.Value <<= comphelper::containerToSequence(rElement);
        rPropVec.push_back( aProp );
    }
}

static void SdXMLCustomShapePropertyMerge( std::vector< css::beans::PropertyValue >& rPropVec,
                                    const std::vector< css::beans::PropertyValue >& rElement,
                                        const OUString& rElementName )
{
    if ( !rElement.empty() )
    {
        beans::PropertyValue aProp;
        aProp.Name = rElementName;
        aProp.Value <<= comphelper::containerToSequence(rElement);
        rPropVec.push_back( aProp );
    }
}

typedef std::unordered_map< OUString, sal_Int32 > EquationHashMap;

/* if rPara.Type is from type EnhancedCustomShapeParameterType::EQUATION, the name of the equation
   will be converted from OUString to index */
static void CheckAndResolveEquationParameter( css::drawing::EnhancedCustomShapeParameter& rPara, EquationHashMap* pH )
{
    if ( rPara.Type == css::drawing::EnhancedCustomShapeParameterType::EQUATION )
    {
        OUString aEquationName;
        if ( rPara.Value >>= aEquationName )
        {
            sal_Int32 nIndex = 0;
            EquationHashMap::iterator aHashIter( pH->find( aEquationName ) );
            if ( aHashIter != pH->end() )
                nIndex = (*aHashIter).second;
            rPara.Value <<= nIndex;
        }
    }
}

void XMLEnhancedCustomShapeContext::endFastElement(sal_Int32 )
{
    // resolve properties that are indexing an Equation
    if ( !maEquations.empty() )
    {
        // creating hash map containing the name and index of each equation
        EquationHashMap aH;
        std::vector< OUString >::iterator aEquationNameIter = maEquationNames.begin();
        std::vector< OUString >::iterator aEquationNameEnd  = maEquationNames.end();
        while( aEquationNameIter != aEquationNameEnd )
        {
            aH[ *aEquationNameIter ] = static_cast<sal_Int32>( aEquationNameIter - maEquationNames.begin() );
            ++aEquationNameIter;
        }

        // resolve equation
        for( auto& rEquation : maEquations )
        {
            sal_Int32 nIndexOf = 0;
            do
            {
                nIndexOf = rEquation.indexOf( '?', nIndexOf );
                if ( nIndexOf != -1 )
                {
                    OUString aEquationName;
                    if ( GetEquationName( rEquation, nIndexOf + 1, aEquationName ) )
                    {
                        // copying first characters inclusive '?'
                        sal_Int32 nIndex = 0;
                        EquationHashMap::iterator aHashIter( aH.find( aEquationName ) );
                        if ( aHashIter != aH.end() )
                            nIndex = (*aHashIter).second;
                        OUString aNew = rEquation.subView( 0, nIndexOf + 1 ) +
                            OUString::number( nIndex ) +
                            rEquation.subView( nIndexOf + aEquationName.getLength() + 1 );
                        rEquation = aNew;
                    }
                    nIndexOf++;
                }
            }
            while( nIndexOf != -1 );
        }

        // Path
        for ( const beans::PropertyValue& rPathItem : maPath )
        {
            switch( EASGet( rPathItem.Name ) )
            {
                case EAS_Coordinates :
                case EAS_GluePoints :
                {
                    uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair > const & rSeq =
                        *o3tl::doAccess<uno::Sequence< css::drawing::EnhancedCustomShapeParameterPair > >(
                            rPathItem.Value);
                    for ( const auto& rElem : rSeq )
                    {
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(rElem.First), &aH );
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(rElem.Second), &aH );
                    }
                }
                break;
                case EAS_TextFrames :
                {
                    uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > const & rSeq =
                        *o3tl::doAccess<uno::Sequence< css::drawing::EnhancedCustomShapeTextFrame > >(
                            rPathItem.Value);
                    for ( const auto& rElem : rSeq )
                    {
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(rElem.TopLeft.First), &aH );
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(rElem.TopLeft.Second), &aH );
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(rElem.BottomRight.First), &aH );
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(rElem.BottomRight.Second), &aH );
                    }
                }
                break;
                default:
                    break;
            }
        }
        for ( css::beans::PropertyValues const & aHandle : maHandles )
        {
            for ( beans::PropertyValue const & propValue : aHandle )
            {
                switch( EASGet( propValue.Name ) )
                {
                    case EAS_RangeYMinimum :
                    case EAS_RangeYMaximum :
                    case EAS_RangeXMinimum :
                    case EAS_RangeXMaximum :
                    case EAS_RadiusRangeMinimum :
                    case EAS_RadiusRangeMaximum :
                    {
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>(*o3tl::doAccess<css::drawing::EnhancedCustomShapeParameter>(
                            propValue.Value)), &aH );
                    }
                    break;

                    case EAS_Position :
                    case EAS_Polar :
                    {
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>((*o3tl::doAccess<css::drawing::EnhancedCustomShapeParameterPair>(
                            propValue.Value)).First), &aH );
                        CheckAndResolveEquationParameter( const_cast<css::drawing::EnhancedCustomShapeParameter &>((*o3tl::doAccess<css::drawing::EnhancedCustomShapeParameterPair>(
                            propValue.Value)).Second), &aH );
                    }
                    break;
                    default:
                        break;
                }
            }
        }
    }

    SdXMLCustomShapePropertyMerge( mrCustomShapeGeometry, maExtrusion, EASGet( EAS_Extrusion ) );
    SdXMLCustomShapePropertyMerge( mrCustomShapeGeometry, maPath,      EASGet( EAS_Path ) );
    SdXMLCustomShapePropertyMerge( mrCustomShapeGeometry, maTextPath,  EASGet( EAS_TextPath ) );
    SdXMLCustomShapePropertyMerge( mrCustomShapeGeometry, maEquations, EASGet( EAS_Equations ) );
    if  ( !maHandles.empty() )
        SdXMLCustomShapePropertyMerge( mrCustomShapeGeometry, maHandles, EASGet( EAS_Handles ) );
}

css::uno::Reference< css::xml::sax::XFastContextHandler > XMLEnhancedCustomShapeContext::createFastChildContext(
    sal_Int32 nElement,
    const css::uno::Reference< css::xml::sax::XFastAttributeList >& xAttrList )
{
    EnhancedCustomShapeTokenEnum aTokenEnum = EASGet( nElement );
    if ( aTokenEnum == EAS_equation )
    {
        OUString aFormula;
        OUString aFormulaName;
        for( auto& aIter : sax_fastparser::castToFastAttributeList(xAttrList) )
        {
            OUString sValue = aIter.toString();
            switch( EASGet( aIter.getToken() ) )
            {
                case EAS_formula :
                    aFormula = sValue;
                break;
                case EAS_name :
                    aFormulaName = sValue;
                break;
                default:
                    break;
            }
        }
        if ( !aFormulaName.isEmpty() || !aFormula.isEmpty() )
        {
            maEquations.push_back( aFormula );
            maEquationNames.push_back( aFormulaName );
        }
    }
    else if ( aTokenEnum == EAS_handle )
    {
        std::vector< css::beans::PropertyValue > aHandle;
        for( auto& aIter : sax_fastparser::castToFastAttributeList(xAttrList) )
        {
            switch( EASGet( aIter.getToken() ) )
            {
                case EAS_handle_mirror_vertical :
                    GetBool( aHandle, aIter.toView(), EAS_MirroredY );
                break;
                case EAS_handle_mirror_horizontal :
                    GetBool( aHandle, aIter.toView(), EAS_MirroredX );
                break;
                case EAS_handle_switched :
                    GetBool( aHandle, aIter.toView(), EAS_Switched );
                break;
                case EAS_handle_position :
                    GetEnhancedParameterPair( aHandle, aIter.toString(), EAS_Position );
                break;
                case EAS_handle_range_x_minimum :
                    GetEnhancedParameter( aHandle, aIter.toString(), EAS_RangeXMinimum );
                break;
                case EAS_handle_range_x_maximum :
                    GetEnhancedParameter( aHandle, aIter.toString(), EAS_RangeXMaximum );
                break;
                case EAS_handle_range_y_minimum :
                    GetEnhancedParameter( aHandle, aIter.toString(), EAS_RangeYMinimum );
                break;
                case EAS_handle_range_y_maximum :
                    GetEnhancedParameter( aHandle, aIter.toString(), EAS_RangeYMaximum );
                break;
                case EAS_handle_polar :
                    GetEnhancedParameterPair( aHandle, aIter.toString(), EAS_Polar );
                break;
                case EAS_handle_radius_range_minimum :
                    GetEnhancedParameter( aHandle, aIter.toString(), EAS_RadiusRangeMinimum );
                break;
                case EAS_handle_radius_range_maximum :
                    GetEnhancedParameter( aHandle, aIter.toString(), EAS_RadiusRangeMaximum );
                break;
                default:
                    break;
            }
        }
        maHandles.push_back( comphelper::containerToSequence(aHandle) );
    }
    return nullptr;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */