Adding upstream version 2.1.30.upstream/2.1.30

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 5587 insertions, 0 deletions

diff --git a/tests/modules/yang/iana-if-type@2014-05-08.yang b/tests/modules/yang/iana-if-type@2014-05-08.yang
new file mode 100644
index 0000000..5dd8219
--- /dev/null
+++ b/tests/modules/yang/iana-if-type@2014-05-08.yang
@@ -0,0 +1,1547 @@
+module iana-if-type {
+  namespace "urn:ietf:params:xml:ns:yang:iana-if-type";
+  prefix ianaift;
+
+  import ietf-interfaces {
+    prefix if;
+  }
+
+  organization "IANA";
+  contact
+    "        Internet Assigned Numbers Authority
+
+     Postal: ICANN
+             4676 Admiralty Way, Suite 330
+             Marina del Rey, CA 90292
+
+     Tel:    +1 310 823 9358
+     <mailto:iana@iana.org>";
+  description
+    "This YANG module defines YANG identities for IANA-registered
+     interface types.
+
+     This YANG module is maintained by IANA and reflects the
+     'ifType definitions' registry.
+
+     The latest revision of this YANG module can be obtained from
+     the IANA web site.
+
+     Requests for new values should be made to IANA via
+     email (iana@iana.org).
+
+     Copyright (c) 2014 IETF Trust and the persons identified as
+     authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     The initial version of this YANG module is part of RFC 7224;
+     see the RFC itself for full legal notices.";
+    reference
+      "IANA 'ifType definitions' registry.
+       <http://www.iana.org/assignments/smi-numbers>";
+
+  revision 2014-05-08 {
+    description
+      "Initial revision.";
+    reference
+      "RFC 7224: IANA Interface Type YANG Module";
+  }
+
+  identity iana-interface-type {
+    base if:interface-type;
+    description
+      "This identity is used as a base for all interface types
+       defined in the 'ifType definitions' registry.";
+  }
+
+
+
+
+
+
+  identity other {
+    base iana-interface-type;
+  }
+  identity regular1822 {
+    base iana-interface-type;
+  }
+  identity hdh1822 {
+    base iana-interface-type;
+  }
+  identity ddnX25 {
+    base iana-interface-type;
+  }
+  identity rfc877x25 {
+    base iana-interface-type;
+    reference
+      "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer";
+  }
+  identity ethernetCsmacd {
+    base iana-interface-type;
+    description
+      "For all Ethernet-like interfaces, regardless of speed,
+       as per RFC 3635.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity iso88023Csmacd {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Deprecated via RFC 3635.
+       Use ethernetCsmacd(6) instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity iso88024TokenBus {
+    base iana-interface-type;
+  }
+  identity iso88025TokenRing {
+    base iana-interface-type;
+  }
+  identity iso88026Man {
+    base iana-interface-type;
+  }
+  identity starLan {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Deprecated via RFC 3635.
+       Use ethernetCsmacd(6) instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity proteon10Mbit {
+    base iana-interface-type;
+  }
+  identity proteon80Mbit {
+    base iana-interface-type;
+  }
+  identity hyperchannel {
+    base iana-interface-type;
+  }
+  identity fddi {
+    base iana-interface-type;
+    reference
+      "RFC 1512 - FDDI Management Information Base";
+  }
+  identity lapb {
+    base iana-interface-type;
+    reference
+      "RFC 1381 - SNMP MIB Extension for X.25 LAPB";
+  }
+  identity sdlc {
+    base iana-interface-type;
+  }
+  identity ds1 {
+    base iana-interface-type;
+    description
+      "DS1-MIB.";
+    reference
+      "RFC 4805 - Definitions of Managed Objects for the
+                  DS1, J1, E1, DS2, and E2 Interface Types";
+  }
+  identity e1 {
+    base iana-interface-type;
+    status obsolete;
+    description
+      "Obsolete; see DS1-MIB.";
+    reference
+      "RFC 4805 - Definitions of Managed Objects for the
+                  DS1, J1, E1, DS2, and E2 Interface Types";
+  }
+
+
+  identity basicISDN {
+    base iana-interface-type;
+    description
+      "No longer used.  See also RFC 2127.";
+  }
+  identity primaryISDN {
+    base iana-interface-type;
+    description
+      "No longer used.  See also RFC 2127.";
+  }
+  identity propPointToPointSerial {
+    base iana-interface-type;
+    description
+      "Proprietary serial.";
+  }
+  identity ppp {
+    base iana-interface-type;
+  }
+  identity softwareLoopback {
+    base iana-interface-type;
+  }
+  identity eon {
+    base iana-interface-type;
+    description
+      "CLNP over IP.";
+  }
+  identity ethernet3Mbit {
+    base iana-interface-type;
+  }
+  identity nsip {
+    base iana-interface-type;
+    description
+      "XNS over IP.";
+  }
+  identity slip {
+    base iana-interface-type;
+    description
+      "Generic SLIP.";
+  }
+  identity ultra {
+    base iana-interface-type;
+    description
+      "Ultra Technologies.";
+  }
+  identity ds3 {
+    base iana-interface-type;
+    description
+      "DS3-MIB.";
+    reference
+      "RFC 3896 - Definitions of Managed Objects for the
+                  DS3/E3 Interface Type";
+  }
+  identity sip {
+    base iana-interface-type;
+    description
+      "SMDS, coffee.";
+    reference
+      "RFC 1694 - Definitions of Managed Objects for SMDS
+                  Interfaces using SMIv2";
+  }
+  identity frameRelay {
+    base iana-interface-type;
+    description
+      "DTE only.";
+    reference
+      "RFC 2115 - Management Information Base for Frame Relay
+                  DTEs Using SMIv2";
+  }
+  identity rs232 {
+    base iana-interface-type;
+    reference
+      "RFC 1659 - Definitions of Managed Objects for RS-232-like
+                  Hardware Devices using SMIv2";
+  }
+  identity para {
+    base iana-interface-type;
+    description
+      "Parallel-port.";
+    reference
+      "RFC 1660 - Definitions of Managed Objects for
+                  Parallel-printer-like Hardware Devices using
+                  SMIv2";
+  }
+  identity arcnet {
+    base iana-interface-type;
+    description
+      "ARCnet.";
+  }
+  identity arcnetPlus {
+    base iana-interface-type;
+    description
+      "ARCnet Plus.";
+  }
+
+
+
+  identity atm {
+    base iana-interface-type;
+    description
+      "ATM cells.";
+  }
+  identity miox25 {
+    base iana-interface-type;
+    reference
+      "RFC 1461 - SNMP MIB extension for Multiprotocol
+                  Interconnect over X.25";
+  }
+  identity sonet {
+    base iana-interface-type;
+    description
+      "SONET or SDH.";
+  }
+  identity x25ple {
+    base iana-interface-type;
+    reference
+      "RFC 2127 - ISDN Management Information Base using SMIv2";
+  }
+  identity iso88022llc {
+    base iana-interface-type;
+  }
+  identity localTalk {
+    base iana-interface-type;
+  }
+  identity smdsDxi {
+    base iana-interface-type;
+  }
+  identity frameRelayService {
+    base iana-interface-type;
+    description
+      "FRNETSERV-MIB.";
+    reference
+      "RFC 2954 - Definitions of Managed Objects for Frame
+                  Relay Service";
+  }
+  identity v35 {
+    base iana-interface-type;
+  }
+  identity hssi {
+    base iana-interface-type;
+  }
+  identity hippi {
+    base iana-interface-type;
+  }
+
+  identity modem {
+    base iana-interface-type;
+    description
+      "Generic modem.";
+  }
+  identity aal5 {
+    base iana-interface-type;
+    description
+      "AAL5 over ATM.";
+  }
+  identity sonetPath {
+    base iana-interface-type;
+  }
+  identity sonetVT {
+    base iana-interface-type;
+  }
+  identity smdsIcip {
+    base iana-interface-type;
+    description
+      "SMDS InterCarrier Interface.";
+  }
+  identity propVirtual {
+    base iana-interface-type;
+    description
+      "Proprietary virtual/internal.";
+    reference
+      "RFC 2863 - The Interfaces Group MIB";
+  }
+  identity propMultiplexor {
+    base iana-interface-type;
+    description
+      "Proprietary multiplexing.";
+    reference
+      "RFC 2863 - The Interfaces Group MIB";
+  }
+  identity ieee80212 {
+    base iana-interface-type;
+    description
+      "100BaseVG.";
+  }
+  identity fibreChannel {
+    base iana-interface-type;
+    description
+      "Fibre Channel.";
+  }
+
+
+
+  identity hippiInterface {
+    base iana-interface-type;
+    description
+      "HIPPI interfaces.";
+  }
+  identity frameRelayInterconnect {
+    base iana-interface-type;
+    status obsolete;
+    description
+      "Obsolete; use either
+       frameRelay(32) or frameRelayService(44).";
+  }
+  identity aflane8023 {
+    base iana-interface-type;
+    description
+      "ATM Emulated LAN for 802.3.";
+  }
+  identity aflane8025 {
+    base iana-interface-type;
+    description
+      "ATM Emulated LAN for 802.5.";
+  }
+  identity cctEmul {
+    base iana-interface-type;
+    description
+      "ATM Emulated circuit.";
+  }
+  identity fastEther {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Obsoleted via RFC 3635.
+       ethernetCsmacd(6) should be used instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity isdn {
+    base iana-interface-type;
+    description
+      "ISDN and X.25.";
+    reference
+      "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN
+                  in the Packet Mode";
+  }
+
+
+
+  identity v11 {
+    base iana-interface-type;
+    description
+      "CCITT V.11/X.21.";
+  }
+  identity v36 {
+    base iana-interface-type;
+    description
+      "CCITT V.36.";
+  }
+  identity g703at64k {
+    base iana-interface-type;
+    description
+      "CCITT G703 at 64Kbps.";
+  }
+  identity g703at2mb {
+    base iana-interface-type;
+    status obsolete;
+    description
+      "Obsolete; see DS1-MIB.";
+  }
+  identity qllc {
+    base iana-interface-type;
+    description
+      "SNA QLLC.";
+  }
+  identity fastEtherFX {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Obsoleted via RFC 3635.
+       ethernetCsmacd(6) should be used instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity channel {
+    base iana-interface-type;
+    description
+      "Channel.";
+  }
+  identity ieee80211 {
+    base iana-interface-type;
+    description
+      "Radio spread spectrum.";
+  }
+  identity ibm370parChan {
+    base iana-interface-type;
+    description
+      "IBM System 360/370 OEMI Channel.";
+  }
+  identity escon {
+    base iana-interface-type;
+    description
+      "IBM Enterprise Systems Connection.";
+  }
+  identity dlsw {
+    base iana-interface-type;
+    description
+      "Data Link Switching.";
+  }
+  identity isdns {
+    base iana-interface-type;
+    description
+      "ISDN S/T interface.";
+  }
+  identity isdnu {
+    base iana-interface-type;
+    description
+      "ISDN U interface.";
+  }
+  identity lapd {
+    base iana-interface-type;
+    description
+      "Link Access Protocol D.";
+  }
+  identity ipSwitch {
+    base iana-interface-type;
+    description
+      "IP Switching Objects.";
+  }
+  identity rsrb {
+    base iana-interface-type;
+    description
+      "Remote Source Route Bridging.";
+  }
+  identity atmLogical {
+    base iana-interface-type;
+    description
+      "ATM Logical Port.";
+    reference
+      "RFC 3606 - Definitions of Supplemental Managed Objects
+                  for ATM Interface";
+  }
+  identity ds0 {
+    base iana-interface-type;
+    description
+      "Digital Signal Level 0.";
+    reference
+      "RFC 2494 - Definitions of Managed Objects for the DS0
+                  and DS0 Bundle Interface Type";
+  }
+  identity ds0Bundle {
+    base iana-interface-type;
+    description
+      "Group of ds0s on the same ds1.";
+    reference
+      "RFC 2494 - Definitions of Managed Objects for the DS0
+                  and DS0 Bundle Interface Type";
+  }
+  identity bsc {
+    base iana-interface-type;
+    description
+      "Bisynchronous Protocol.";
+  }
+  identity async {
+    base iana-interface-type;
+    description
+      "Asynchronous Protocol.";
+  }
+  identity cnr {
+    base iana-interface-type;
+    description
+      "Combat Net Radio.";
+  }
+  identity iso88025Dtr {
+    base iana-interface-type;
+    description
+      "ISO 802.5r DTR.";
+  }
+  identity eplrs {
+    base iana-interface-type;
+    description
+      "Ext Pos Loc Report Sys.";
+  }
+  identity arap {
+    base iana-interface-type;
+    description
+      "Appletalk Remote Access Protocol.";
+  }
+  identity propCnls {
+    base iana-interface-type;
+    description
+      "Proprietary Connectionless Protocol.";
+  }
+  identity hostPad {
+    base iana-interface-type;
+    description
+      "CCITT-ITU X.29 PAD Protocol.";
+  }
+  identity termPad {
+    base iana-interface-type;
+    description
+      "CCITT-ITU X.3 PAD Facility.";
+  }
+  identity frameRelayMPI {
+    base iana-interface-type;
+    description
+      "Multiproto Interconnect over FR.";
+  }
+  identity x213 {
+    base iana-interface-type;
+    description
+      "CCITT-ITU X213.";
+  }
+  identity adsl {
+    base iana-interface-type;
+    description
+      "Asymmetric Digital Subscriber Loop.";
+  }
+  identity radsl {
+    base iana-interface-type;
+    description
+      "Rate-Adapt. Digital Subscriber Loop.";
+  }
+  identity sdsl {
+    base iana-interface-type;
+    description
+      "Symmetric Digital Subscriber Loop.";
+  }
+  identity vdsl {
+    base iana-interface-type;
+    description
+      "Very H-Speed Digital Subscrib. Loop.";
+  }
+  identity iso88025CRFPInt {
+    base iana-interface-type;
+    description
+      "ISO 802.5 CRFP.";
+  }
+  identity myrinet {
+    base iana-interface-type;
+    description
+      "Myricom Myrinet.";
+  }
+  identity voiceEM {
+    base iana-interface-type;
+    description
+      "Voice recEive and transMit.";
+  }
+  identity voiceFXO {
+    base iana-interface-type;
+    description
+      "Voice Foreign Exchange Office.";
+  }
+  identity voiceFXS {
+    base iana-interface-type;
+    description
+      "Voice Foreign Exchange Station.";
+  }
+  identity voiceEncap {
+    base iana-interface-type;
+    description
+      "Voice encapsulation.";
+  }
+  identity voiceOverIp {
+    base iana-interface-type;
+    description
+      "Voice over IP encapsulation.";
+  }
+  identity atmDxi {
+    base iana-interface-type;
+    description
+      "ATM DXI.";
+  }
+  identity atmFuni {
+    base iana-interface-type;
+    description
+      "ATM FUNI.";
+  }
+  identity atmIma {
+    base iana-interface-type;
+    description
+      "ATM IMA.";
+  }
+  identity pppMultilinkBundle {
+    base iana-interface-type;
+    description
+      "PPP Multilink Bundle.";
+  }
+  identity ipOverCdlc {
+    base iana-interface-type;
+    description
+      "IBM ipOverCdlc.";
+  }
+  identity ipOverClaw {
+    base iana-interface-type;
+    description
+      "IBM Common Link Access to Workstn.";
+  }
+  identity stackToStack {
+    base iana-interface-type;
+    description
+      "IBM stackToStack.";
+  }
+  identity virtualIpAddress {
+    base iana-interface-type;
+    description
+      "IBM VIPA.";
+  }
+  identity mpc {
+    base iana-interface-type;
+    description
+      "IBM multi-protocol channel support.";
+  }
+  identity ipOverAtm {
+    base iana-interface-type;
+    description
+      "IBM ipOverAtm.";
+    reference
+      "RFC 2320 - Definitions of Managed Objects for Classical IP
+                  and ARP Over ATM Using SMIv2 (IPOA-MIB)";
+  }
+  identity iso88025Fiber {
+    base iana-interface-type;
+    description
+      "ISO 802.5j Fiber Token Ring.";
+  }
+  identity tdlc {
+    base iana-interface-type;
+    description
+      "IBM twinaxial data link control.";
+  }
+  identity gigabitEthernet {
+    base iana-interface-type;
+    status deprecated;
+
+
+    description
+      "Obsoleted via RFC 3635.
+       ethernetCsmacd(6) should be used instead.";
+    reference
+      "RFC 3635 - Definitions of Managed Objects for the
+                  Ethernet-like Interface Types";
+  }
+  identity hdlc {
+    base iana-interface-type;
+    description
+      "HDLC.";
+  }
+  identity lapf {
+    base iana-interface-type;
+    description
+      "LAP F.";
+  }
+  identity v37 {
+    base iana-interface-type;
+    description
+      "V.37.";
+  }
+  identity x25mlp {
+    base iana-interface-type;
+    description
+      "Multi-Link Protocol.";
+  }
+  identity x25huntGroup {
+    base iana-interface-type;
+    description
+      "X25 Hunt Group.";
+  }
+  identity transpHdlc {
+    base iana-interface-type;
+    description
+      "Transp HDLC.";
+  }
+  identity interleave {
+    base iana-interface-type;
+    description
+      "Interleave channel.";
+  }
+  identity fast {
+    base iana-interface-type;
+    description
+      "Fast channel.";
+  }
+
+  identity ip {
+    base iana-interface-type;
+    description
+      "IP (for APPN HPR in IP networks).";
+  }
+  identity docsCableMaclayer {
+    base iana-interface-type;
+    description
+      "CATV Mac Layer.";
+  }
+  identity docsCableDownstream {
+    base iana-interface-type;
+    description
+      "CATV Downstream interface.";
+  }
+  identity docsCableUpstream {
+    base iana-interface-type;
+    description
+      "CATV Upstream interface.";
+  }
+  identity a12MppSwitch {
+    base iana-interface-type;
+    description
+      "Avalon Parallel Processor.";
+  }
+  identity tunnel {
+    base iana-interface-type;
+    description
+      "Encapsulation interface.";
+  }
+  identity coffee {
+    base iana-interface-type;
+    description
+      "Coffee pot.";
+    reference
+      "RFC 2325 - Coffee MIB";
+  }
+  identity ces {
+    base iana-interface-type;
+    description
+      "Circuit Emulation Service.";
+  }
+  identity atmSubInterface {
+    base iana-interface-type;
+    description
+      "ATM Sub Interface.";
+  }
+
+  identity l2vlan {
+    base iana-interface-type;
+    description
+      "Layer 2 Virtual LAN using 802.1Q.";
+  }
+  identity l3ipvlan {
+    base iana-interface-type;
+    description
+      "Layer 3 Virtual LAN using IP.";
+  }
+  identity l3ipxvlan {
+    base iana-interface-type;
+    description
+      "Layer 3 Virtual LAN using IPX.";
+  }
+  identity digitalPowerline {
+    base iana-interface-type;
+    description
+      "IP over Power Lines.";
+  }
+  identity mediaMailOverIp {
+    base iana-interface-type;
+    description
+      "Multimedia Mail over IP.";
+  }
+  identity dtm {
+    base iana-interface-type;
+    description
+      "Dynamic synchronous Transfer Mode.";
+  }
+  identity dcn {
+    base iana-interface-type;
+    description
+      "Data Communications Network.";
+  }
+  identity ipForward {
+    base iana-interface-type;
+    description
+      "IP Forwarding Interface.";
+  }
+  identity msdsl {
+    base iana-interface-type;
+    description
+      "Multi-rate Symmetric DSL.";
+  }
+  identity ieee1394 {
+    base iana-interface-type;
+
+    description
+      "IEEE1394 High Performance Serial Bus.";
+  }
+  identity if-gsn {
+    base iana-interface-type;
+    description
+      "HIPPI-6400.";
+  }
+  identity dvbRccMacLayer {
+    base iana-interface-type;
+    description
+      "DVB-RCC MAC Layer.";
+  }
+  identity dvbRccDownstream {
+    base iana-interface-type;
+    description
+      "DVB-RCC Downstream Channel.";
+  }
+  identity dvbRccUpstream {
+    base iana-interface-type;
+    description
+      "DVB-RCC Upstream Channel.";
+  }
+  identity atmVirtual {
+    base iana-interface-type;
+    description
+      "ATM Virtual Interface.";
+  }
+  identity mplsTunnel {
+    base iana-interface-type;
+    description
+      "MPLS Tunnel Virtual Interface.";
+  }
+  identity srp {
+    base iana-interface-type;
+    description
+      "Spatial Reuse Protocol.";
+  }
+  identity voiceOverAtm {
+    base iana-interface-type;
+    description
+      "Voice over ATM.";
+  }
+  identity voiceOverFrameRelay {
+    base iana-interface-type;
+    description
+      "Voice Over Frame Relay.";
+  }
+  identity idsl {
+    base iana-interface-type;
+    description
+      "Digital Subscriber Loop over ISDN.";
+  }
+  identity compositeLink {
+    base iana-interface-type;
+    description
+      "Avici Composite Link Interface.";
+  }
+  identity ss7SigLink {
+    base iana-interface-type;
+    description
+      "SS7 Signaling Link.";
+  }
+  identity propWirelessP2P {
+    base iana-interface-type;
+    description
+      "Prop. P2P wireless interface.";
+  }
+  identity frForward {
+    base iana-interface-type;
+    description
+      "Frame Forward Interface.";
+  }
+  identity rfc1483 {
+    base iana-interface-type;
+    description
+      "Multiprotocol over ATM AAL5.";
+    reference
+      "RFC 1483 - Multiprotocol Encapsulation over ATM
+                  Adaptation Layer 5";
+  }
+  identity usb {
+    base iana-interface-type;
+    description
+      "USB Interface.";
+  }
+  identity ieee8023adLag {
+    base iana-interface-type;
+    description
+      "IEEE 802.3ad Link Aggregate.";
+  }
+  identity bgppolicyaccounting {
+    base iana-interface-type;
+    description
+      "BGP Policy Accounting.";
+  }
+  identity frf16MfrBundle {
+    base iana-interface-type;
+    description
+      "FRF.16 Multilink Frame Relay.";
+  }
+  identity h323Gatekeeper {
+    base iana-interface-type;
+    description
+      "H323 Gatekeeper.";
+  }
+  identity h323Proxy {
+    base iana-interface-type;
+    description
+      "H323 Voice and Video Proxy.";
+  }
+  identity mpls {
+    base iana-interface-type;
+    description
+      "MPLS.";
+  }
+  identity mfSigLink {
+    base iana-interface-type;
+    description
+      "Multi-frequency signaling link.";
+  }
+  identity hdsl2 {
+    base iana-interface-type;
+    description
+      "High Bit-Rate DSL - 2nd generation.";
+  }
+  identity shdsl {
+    base iana-interface-type;
+    description
+      "Multirate HDSL2.";
+  }
+  identity ds1FDL {
+    base iana-interface-type;
+    description
+      "Facility Data Link (4Kbps) on a DS1.";
+  }
+  identity pos {
+    base iana-interface-type;
+    description
+      "Packet over SONET/SDH Interface.";
+  }
+
+
+
+  identity dvbAsiIn {
+    base iana-interface-type;
+    description
+      "DVB-ASI Input.";
+  }
+  identity dvbAsiOut {
+    base iana-interface-type;
+    description
+      "DVB-ASI Output.";
+  }
+  identity plc {
+    base iana-interface-type;
+    description
+      "Power Line Communications.";
+  }
+  identity nfas {
+    base iana-interface-type;
+    description
+      "Non-Facility Associated Signaling.";
+  }
+  identity tr008 {
+    base iana-interface-type;
+    description
+      "TR008.";
+  }
+  identity gr303RDT {
+    base iana-interface-type;
+    description
+      "Remote Digital Terminal.";
+  }
+  identity gr303IDT {
+    base iana-interface-type;
+    description
+      "Integrated Digital Terminal.";
+  }
+  identity isup {
+    base iana-interface-type;
+    description
+      "ISUP.";
+  }
+  identity propDocsWirelessMaclayer {
+    base iana-interface-type;
+    description
+      "Cisco proprietary Maclayer.";
+  }
+
+
+
+  identity propDocsWirelessDownstream {
+    base iana-interface-type;
+    description
+      "Cisco proprietary Downstream.";
+  }
+  identity propDocsWirelessUpstream {
+    base iana-interface-type;
+    description
+      "Cisco proprietary Upstream.";
+  }
+  identity hiperlan2 {
+    base iana-interface-type;
+    description
+      "HIPERLAN Type 2 Radio Interface.";
+  }
+  identity propBWAp2Mp {
+    base iana-interface-type;
+    description
+      "PropBroadbandWirelessAccesspt2Multipt (use of this value
+       for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f
+       is deprecated, and ieee80216WMAN(237) should be used
+       instead).";
+  }
+  identity sonetOverheadChannel {
+    base iana-interface-type;
+    description
+      "SONET Overhead Channel.";
+  }
+  identity digitalWrapperOverheadChannel {
+    base iana-interface-type;
+    description
+      "Digital Wrapper.";
+  }
+  identity aal2 {
+    base iana-interface-type;
+    description
+      "ATM adaptation layer 2.";
+  }
+  identity radioMAC {
+    base iana-interface-type;
+    description
+      "MAC layer over radio links.";
+  }
+  identity atmRadio {
+    base iana-interface-type;
+    description
+      "ATM over radio links.";
+  }
+  identity imt {
+    base iana-interface-type;
+    description
+      "Inter-Machine Trunks.";
+  }
+  identity mvl {
+    base iana-interface-type;
+    description
+      "Multiple Virtual Lines DSL.";
+  }
+  identity reachDSL {
+    base iana-interface-type;
+    description
+      "Long Reach DSL.";
+  }
+  identity frDlciEndPt {
+    base iana-interface-type;
+    description
+      "Frame Relay DLCI End Point.";
+  }
+  identity atmVciEndPt {
+    base iana-interface-type;
+    description
+      "ATM VCI End Point.";
+  }
+  identity opticalChannel {
+    base iana-interface-type;
+    description
+      "Optical Channel.";
+  }
+  identity opticalTransport {
+    base iana-interface-type;
+    description
+      "Optical Transport.";
+  }
+  identity propAtm {
+    base iana-interface-type;
+    description
+      "Proprietary ATM.";
+  }
+  identity voiceOverCable {
+    base iana-interface-type;
+    description
+      "Voice Over Cable Interface.";
+  }
+
+
+
+  identity infiniband {
+    base iana-interface-type;
+    description
+      "Infiniband.";
+  }
+  identity teLink {
+    base iana-interface-type;
+    description
+      "TE Link.";
+  }
+  identity q2931 {
+    base iana-interface-type;
+    description
+      "Q.2931.";
+  }
+  identity virtualTg {
+    base iana-interface-type;
+    description
+      "Virtual Trunk Group.";
+  }
+  identity sipTg {
+    base iana-interface-type;
+    description
+      "SIP Trunk Group.";
+  }
+  identity sipSig {
+    base iana-interface-type;
+    description
+      "SIP Signaling.";
+  }
+  identity docsCableUpstreamChannel {
+    base iana-interface-type;
+    description
+      "CATV Upstream Channel.";
+  }
+  identity econet {
+    base iana-interface-type;
+    description
+      "Acorn Econet.";
+  }
+  identity pon155 {
+    base iana-interface-type;
+    description
+      "FSAN 155Mb Symetrical PON interface.";
+  }
+
+
+
+  identity pon622 {
+    base iana-interface-type;
+    description
+      "FSAN 622Mb Symetrical PON interface.";
+  }
+  identity bridge {
+    base iana-interface-type;
+    description
+      "Transparent bridge interface.";
+  }
+  identity linegroup {
+    base iana-interface-type;
+    description
+      "Interface common to multiple lines.";
+  }
+  identity voiceEMFGD {
+    base iana-interface-type;
+    description
+      "Voice E&M Feature Group D.";
+  }
+  identity voiceFGDEANA {
+    base iana-interface-type;
+    description
+      "Voice FGD Exchange Access North American.";
+  }
+  identity voiceDID {
+    base iana-interface-type;
+    description
+      "Voice Direct Inward Dialing.";
+  }
+  identity mpegTransport {
+    base iana-interface-type;
+    description
+      "MPEG transport interface.";
+  }
+  identity sixToFour {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "6to4 interface (DEPRECATED).";
+    reference
+      "RFC 4087 - IP Tunnel MIB";
+  }
+  identity gtp {
+    base iana-interface-type;
+    description
+      "GTP (GPRS Tunneling Protocol).";
+  }
+  identity pdnEtherLoop1 {
+    base iana-interface-type;
+    description
+      "Paradyne EtherLoop 1.";
+  }
+  identity pdnEtherLoop2 {
+    base iana-interface-type;
+    description
+      "Paradyne EtherLoop 2.";
+  }
+  identity opticalChannelGroup {
+    base iana-interface-type;
+    description
+      "Optical Channel Group.";
+  }
+  identity homepna {
+    base iana-interface-type;
+    description
+      "HomePNA ITU-T G.989.";
+  }
+  identity gfp {
+    base iana-interface-type;
+    description
+      "Generic Framing Procedure (GFP).";
+  }
+  identity ciscoISLvlan {
+    base iana-interface-type;
+    description
+      "Layer 2 Virtual LAN using Cisco ISL.";
+  }
+  identity actelisMetaLOOP {
+    base iana-interface-type;
+    description
+      "Acteleis proprietary MetaLOOP High Speed Link.";
+  }
+  identity fcipLink {
+    base iana-interface-type;
+    description
+      "FCIP Link.";
+  }
+  identity rpr {
+    base iana-interface-type;
+    description
+      "Resilient Packet Ring Interface Type.";
+  }
+
+
+
+  identity qam {
+    base iana-interface-type;
+    description
+      "RF Qam Interface.";
+  }
+  identity lmp {
+    base iana-interface-type;
+    description
+      "Link Management Protocol.";
+    reference
+      "RFC 4327 - Link Management Protocol (LMP) Management
+                  Information Base (MIB)";
+  }
+  identity cblVectaStar {
+    base iana-interface-type;
+    description
+      "Cambridge Broadband Networks Limited VectaStar.";
+  }
+  identity docsCableMCmtsDownstream {
+    base iana-interface-type;
+    description
+      "CATV Modular CMTS Downstream Interface.";
+  }
+  identity adsl2 {
+    base iana-interface-type;
+    status deprecated;
+    description
+      "Asymmetric Digital Subscriber Loop Version 2
+       (DEPRECATED/OBSOLETED - please use adsl2plus(238)
+       instead).";
+    reference
+      "RFC 4706 - Definitions of Managed Objects for Asymmetric
+                  Digital Subscriber Line 2 (ADSL2)";
+  }
+  identity macSecControlledIF {
+    base iana-interface-type;
+    description
+      "MACSecControlled.";
+  }
+  identity macSecUncontrolledIF {
+    base iana-interface-type;
+    description
+      "MACSecUncontrolled.";
+  }
+  identity aviciOpticalEther {
+    base iana-interface-type;
+    description
+      "Avici Optical Ethernet Aggregate.";
+  }
+  identity atmbond {
+    base iana-interface-type;
+    description
+      "atmbond.";
+  }
+  identity voiceFGDOS {
+    base iana-interface-type;
+    description
+      "Voice FGD Operator Services.";
+  }
+  identity mocaVersion1 {
+    base iana-interface-type;
+    description
+      "MultiMedia over Coax Alliance (MoCA) Interface
+       as documented in information provided privately to IANA.";
+  }
+  identity ieee80216WMAN {
+    base iana-interface-type;
+    description
+      "IEEE 802.16 WMAN interface.";
+  }
+  identity adsl2plus {
+    base iana-interface-type;
+    description
+      "Asymmetric Digital Subscriber Loop Version 2 -
+       Version 2 Plus and all variants.";
+  }
+  identity dvbRcsMacLayer {
+    base iana-interface-type;
+    description
+      "DVB-RCS MAC Layer.";
+    reference
+      "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+  }
+  identity dvbTdm {
+    base iana-interface-type;
+    description
+      "DVB Satellite TDM.";
+    reference
+      "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+  }
+  identity dvbRcsTdma {
+    base iana-interface-type;
+    description
+      "DVB-RCS TDMA.";
+    reference
+      "RFC 5728 - The SatLabs Group DVB-RCS MIB";
+  }
+  identity x86Laps {
+    base iana-interface-type;
+    description
+      "LAPS based on ITU-T X.86/Y.1323.";
+  }
+  identity wwanPP {
+    base iana-interface-type;
+    description
+      "3GPP WWAN.";
+  }
+  identity wwanPP2 {
+    base iana-interface-type;
+    description
+      "3GPP2 WWAN.";
+  }
+  identity voiceEBS {
+    base iana-interface-type;
+    description
+      "Voice P-phone EBS physical interface.";
+  }
+  identity ifPwType {
+    base iana-interface-type;
+    description
+      "Pseudowire interface type.";
+    reference
+      "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)";
+  }
+  identity ilan {
+    base iana-interface-type;
+    description
+      "Internal LAN on a bridge per IEEE 802.1ap.";
+  }
+  identity pip {
+    base iana-interface-type;
+    description
+      "Provider Instance Port on a bridge per IEEE 802.1ah PBB.";
+  }
+  identity aluELP {
+    base iana-interface-type;
+    description
+      "Alcatel-Lucent Ethernet Link Protection.";
+  }
+  identity gpon {
+    base iana-interface-type;
+    description
+      "Gigabit-capable passive optical networks (G-PON) as per
+       ITU-T G.948.";
+  }
+  identity vdsl2 {
+    base iana-interface-type;
+    description
+      "Very high speed digital subscriber line Version 2
+       (as per ITU-T Recommendation G.993.2).";
+    reference
+      "RFC 5650 - Definitions of Managed Objects for Very High
+                  Speed Digital Subscriber Line 2 (VDSL2)";
+  }
+  identity capwapDot11Profile {
+    base iana-interface-type;
+    description
+      "WLAN Profile Interface.";
+    reference
+      "RFC 5834 - Control and Provisioning of Wireless Access
+                  Points (CAPWAP) Protocol Binding MIB for
+                  IEEE 802.11";
+  }
+  identity capwapDot11Bss {
+    base iana-interface-type;
+    description
+      "WLAN BSS Interface.";
+    reference
+      "RFC 5834 - Control and Provisioning of Wireless Access
+                  Points (CAPWAP) Protocol Binding MIB for
+                  IEEE 802.11";
+  }
+  identity capwapWtpVirtualRadio {
+    base iana-interface-type;
+    description
+      "WTP Virtual Radio Interface.";
+    reference
+      "RFC 5833 - Control and Provisioning of Wireless Access
+                  Points (CAPWAP) Protocol Base MIB";
+  }
+  identity bits {
+    base iana-interface-type;
+    description
+      "bitsport.";
+  }
+  identity docsCableUpstreamRfPort {
+    base iana-interface-type;
+    description
+      "DOCSIS CATV Upstream RF Port.";
+  }
+
+
+  identity cableDownstreamRfPort {
+    base iana-interface-type;
+    description
+      "CATV downstream RF Port.";
+  }
+  identity vmwareVirtualNic {
+    base iana-interface-type;
+    description
+      "VMware Virtual Network Interface.";
+  }
+  identity ieee802154 {
+    base iana-interface-type;
+    description
+      "IEEE 802.15.4 WPAN interface.";
+    reference
+      "IEEE 802.15.4-2006";
+  }
+  identity otnOdu {
+    base iana-interface-type;
+    description
+      "OTN Optical Data Unit.";
+  }
+  identity otnOtu {
+    base iana-interface-type;
+    description
+      "OTN Optical channel Transport Unit.";
+  }
+  identity ifVfiType {
+    base iana-interface-type;
+    description
+      "VPLS Forwarding Instance Interface Type.";
+  }
+  identity g9981 {
+    base iana-interface-type;
+    description
+      "G.998.1 bonded interface.";
+  }
+  identity g9982 {
+    base iana-interface-type;
+    description
+      "G.998.2 bonded interface.";
+  }
+  identity g9983 {
+    base iana-interface-type;
+    description
+      "G.998.3 bonded interface.";
+  }
+
+  identity aluEpon {
+    base iana-interface-type;
+    description
+      "Ethernet Passive Optical Networks (E-PON).";
+  }
+  identity aluEponOnu {
+    base iana-interface-type;
+    description
+      "EPON Optical Network Unit.";
+  }
+  identity aluEponPhysicalUni {
+    base iana-interface-type;
+    description
+      "EPON physical User to Network interface.";
+  }
+  identity aluEponLogicalLink {
+    base iana-interface-type;
+    description
+      "The emulation of a point-to-point link over the EPON
+       layer.";
+  }
+  identity aluGponOnu {
+    base iana-interface-type;
+    description
+      "GPON Optical Network Unit.";
+    reference
+      "ITU-T G.984.2";
+  }
+  identity aluGponPhysicalUni {
+    base iana-interface-type;
+    description
+      "GPON physical User to Network interface.";
+    reference
+      "ITU-T G.984.2";
+  }
+  identity vmwareNicTeam {
+    base iana-interface-type;
+    description
+      "VMware NIC Team.";
+  }
+}
diff --git a/tests/modules/yang/ietf-interfaces@2014-05-08.yang b/tests/modules/yang/ietf-interfaces@2014-05-08.yang
new file mode 100644
index 0000000..ad64425
--- /dev/null
+++ b/tests/modules/yang/ietf-interfaces@2014-05-08.yang
@@ -0,0 +1,725 @@
+module ietf-interfaces {
+
+  namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces";
+  prefix if;
+
+  import ietf-yang-types {
+    prefix yang;
+  }
+
+  organization
+    "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+  contact
+    "WG Web:   <http://tools.ietf.org/wg/netmod/>
+     WG List:  <mailto:netmod@ietf.org>
+
+     WG Chair: Thomas Nadeau
+               <mailto:tnadeau@lucidvision.com>
+
+     WG Chair: Juergen Schoenwaelder
+               <mailto:j.schoenwaelder@jacobs-university.de>
+
+     Editor:   Martin Bjorklund
+               <mailto:mbj@tail-f.com>";
+
+  description
+    "This module contains a collection of YANG definitions for
+     managing network interfaces.
+
+     Copyright (c) 2014 IETF Trust and the persons identified as
+     authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC 7223; see
+     the RFC itself for full legal notices.";
+
+  revision 2014-05-08 {
+    description
+      "Initial revision.";
+    reference
+      "RFC 7223: A YANG Data Model for Interface Management";
+  }
+
+  /*
+   * Typedefs
+   */
+
+  typedef interface-ref {
+    type leafref {
+      path "/if:interfaces/if:interface/if:name";
+    }
+    description
+      "This type is used by data models that need to reference
+       configured interfaces.";
+  }
+
+  typedef interface-state-ref {
+    type leafref {
+      path "/if:interfaces-state/if:interface/if:name";
+    }
+    description
+      "This type is used by data models that need to reference
+       the operationally present interfaces.";
+  }
+
+  /*
+   * Identities
+   */
+
+  identity interface-type {
+    description
+      "Base identity from which specific interface types are
+       derived.";
+  }
+
+  /*
+   * Features
+   */
+
+  feature arbitrary-names {
+    description
+      "This feature indicates that the device allows user-controlled
+       interfaces to be named arbitrarily.";
+  }
+  feature pre-provisioning {
+    description
+      "This feature indicates that the device supports
+       pre-provisioning of interface configuration, i.e., it is
+       possible to configure an interface whose physical interface
+       hardware is not present on the device.";
+  }
+
+  feature if-mib {
+    description
+      "This feature indicates that the device implements
+       the IF-MIB.";
+    reference
+      "RFC 2863: The Interfaces Group MIB";
+  }
+
+  /*
+   * Configuration data nodes
+   */
+
+  container interfaces {
+    description
+      "Interface configuration parameters.";
+
+    list interface {
+      key "name";
+
+      description
+        "The list of configured interfaces on the device.
+
+         The operational state of an interface is available in the
+         /interfaces-state/interface list.  If the configuration of a
+         system-controlled interface cannot be used by the system
+         (e.g., the interface hardware present does not match the
+         interface type), then the configuration is not applied to
+         the system-controlled interface shown in the
+         /interfaces-state/interface list.  If the configuration
+         of a user-controlled interface cannot be used by the system,
+         the configured interface is not instantiated in the
+         /interfaces-state/interface list.";
+
+     leaf name {
+        type string;
+        description
+          "The name of the interface.
+
+           A device MAY restrict the allowed values for this leaf,
+           possibly depending on the type of the interface.
+           For system-controlled interfaces, this leaf is the
+           device-specific name of the interface.  The 'config false'
+           list /interfaces-state/interface contains the currently
+           existing interfaces on the device.
+
+           If a client tries to create configuration for a
+           system-controlled interface that is not present in the
+           /interfaces-state/interface list, the server MAY reject
+           the request if the implementation does not support
+           pre-provisioning of interfaces or if the name refers to
+           an interface that can never exist in the system.  A
+           NETCONF server MUST reply with an rpc-error with the
+           error-tag 'invalid-value' in this case.
+
+           If the device supports pre-provisioning of interface
+           configuration, the 'pre-provisioning' feature is
+           advertised.
+
+           If the device allows arbitrarily named user-controlled
+           interfaces, the 'arbitrary-names' feature is advertised.
+
+           When a configured user-controlled interface is created by
+           the system, it is instantiated with the same name in the
+           /interface-state/interface list.";
+      }
+
+      leaf description {
+        type string;
+        description
+          "A textual description of the interface.
+
+           A server implementation MAY map this leaf to the ifAlias
+           MIB object.  Such an implementation needs to use some
+           mechanism to handle the differences in size and characters
+           allowed between this leaf and ifAlias.  The definition of
+           such a mechanism is outside the scope of this document.
+
+           Since ifAlias is defined to be stored in non-volatile
+           storage, the MIB implementation MUST map ifAlias to the
+           value of 'description' in the persistently stored
+           datastore.
+
+           Specifically, if the device supports ':startup', when
+           ifAlias is read the device MUST return the value of
+           'description' in the 'startup' datastore, and when it is
+           written, it MUST be written to the 'running' and 'startup'
+           datastores.  Note that it is up to the implementation to
+
+           decide whether to modify this single leaf in 'startup' or
+           perform an implicit copy-config from 'running' to
+           'startup'.
+
+           If the device does not support ':startup', ifAlias MUST
+           be mapped to the 'description' leaf in the 'running'
+           datastore.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifAlias";
+      }
+
+      leaf type {
+        type identityref {
+          base interface-type;
+        }
+        mandatory true;
+        description
+          "The type of the interface.
+
+           When an interface entry is created, a server MAY
+           initialize the type leaf with a valid value, e.g., if it
+           is possible to derive the type from the name of the
+           interface.
+
+           If a client tries to set the type of an interface to a
+           value that can never be used by the system, e.g., if the
+           type is not supported or if the type does not match the
+           name of the interface, the server MUST reject the request.
+           A NETCONF server MUST reply with an rpc-error with the
+           error-tag 'invalid-value' in this case.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifType";
+      }
+
+      leaf enabled {
+        type boolean;
+        default "true";
+        description
+          "This leaf contains the configured, desired state of the
+           interface.
+
+           Systems that implement the IF-MIB use the value of this
+           leaf in the 'running' datastore to set
+           IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry
+           has been initialized, as described in RFC 2863.
+
+
+
+           Changes in this leaf in the 'running' datastore are
+           reflected in ifAdminStatus, but if ifAdminStatus is
+           changed over SNMP, this leaf is not affected.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+      }
+
+      leaf link-up-down-trap-enable {
+        if-feature if-mib;
+        type enumeration {
+          enum enabled {
+            value 1;
+          }
+          enum disabled {
+            value 2;
+          }
+        }
+        description
+          "Controls whether linkUp/linkDown SNMP notifications
+           should be generated for this interface.
+
+           If this node is not configured, the value 'enabled' is
+           operationally used by the server for interfaces that do
+           not operate on top of any other interface (i.e., there are
+           no 'lower-layer-if' entries), and 'disabled' otherwise.";
+        reference
+          "RFC 2863: The Interfaces Group MIB -
+                     ifLinkUpDownTrapEnable";
+      }
+    }
+  }
+
+  /*
+   * Operational state data nodes
+   */
+
+  container interfaces-state {
+    config false;
+    description
+      "Data nodes for the operational state of interfaces.";
+
+    list interface {
+      key "name";
+
+
+
+
+
+      description
+        "The list of interfaces on the device.
+
+         System-controlled interfaces created by the system are
+         always present in this list, whether they are configured or
+         not.";
+
+      leaf name {
+        type string;
+        description
+          "The name of the interface.
+
+           A server implementation MAY map this leaf to the ifName
+           MIB object.  Such an implementation needs to use some
+           mechanism to handle the differences in size and characters
+           allowed between this leaf and ifName.  The definition of
+           such a mechanism is outside the scope of this document.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifName";
+      }
+
+      leaf type {
+        type identityref {
+          base interface-type;
+        }
+        mandatory true;
+        description
+          "The type of the interface.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifType";
+      }
+
+      leaf admin-status {
+        if-feature if-mib;
+        type enumeration {
+          enum up {
+            value 1;
+            description
+              "Ready to pass packets.";
+          }
+          enum down {
+            value 2;
+            description
+              "Not ready to pass packets and not in some test mode.";
+          }
+
+
+
+          enum testing {
+            value 3;
+            description
+              "In some test mode.";
+          }
+        }
+        mandatory true;
+        description
+          "The desired state of the interface.
+
+           This leaf has the same read semantics as ifAdminStatus.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
+      }
+
+      leaf oper-status {
+        type enumeration {
+          enum up {
+            value 1;
+            description
+              "Ready to pass packets.";
+          }
+          enum down {
+            value 2;
+            description
+              "The interface does not pass any packets.";
+          }
+          enum testing {
+            value 3;
+            description
+              "In some test mode.  No operational packets can
+               be passed.";
+          }
+          enum unknown {
+            value 4;
+            description
+              "Status cannot be determined for some reason.";
+          }
+          enum dormant {
+            value 5;
+            description
+              "Waiting for some external event.";
+          }
+          enum not-present {
+            value 6;
+            description
+              "Some component (typically hardware) is missing.";
+          }
+          enum lower-layer-down {
+            value 7;
+            description
+              "Down due to state of lower-layer interface(s).";
+          }
+        }
+        mandatory true;
+        description
+          "The current operational state of the interface.
+
+           This leaf has the same semantics as ifOperStatus.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifOperStatus";
+      }
+
+      leaf last-change {
+        type yang:date-and-time;
+        description
+          "The time the interface entered its current operational
+           state.  If the current state was entered prior to the
+           last re-initialization of the local network management
+           subsystem, then this node is not present.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifLastChange";
+      }
+
+      leaf if-index {
+        if-feature if-mib;
+        type int32 {
+          range "1..2147483647";
+        }
+        mandatory true;
+        description
+          "The ifIndex value for the ifEntry represented by this
+           interface.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifIndex";
+      }
+
+      leaf phys-address {
+        type yang:phys-address;
+        description
+          "The interface's address at its protocol sub-layer.  For
+           example, for an 802.x interface, this object normally
+           contains a Media Access Control (MAC) address.  The
+           interface's media-specific modules must define the bit
+
+
+           and byte ordering and the format of the value of this
+           object.  For interfaces that do not have such an address
+           (e.g., a serial line), this node is not present.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifPhysAddress";
+      }
+
+      leaf-list higher-layer-if {
+        type interface-state-ref;
+        description
+          "A list of references to interfaces layered on top of this
+           interface.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifStackTable";
+      }
+
+      leaf-list lower-layer-if {
+        type interface-state-ref;
+        description
+          "A list of references to interfaces layered underneath this
+           interface.";
+        reference
+          "RFC 2863: The Interfaces Group MIB - ifStackTable";
+      }
+
+      leaf speed {
+        type yang:gauge64;
+        units "bits/second";
+        description
+            "An estimate of the interface's current bandwidth in bits
+             per second.  For interfaces that do not vary in
+             bandwidth or for those where no accurate estimation can
+             be made, this node should contain the nominal bandwidth.
+             For interfaces that have no concept of bandwidth, this
+             node is not present.";
+        reference
+          "RFC 2863: The Interfaces Group MIB -
+                     ifSpeed, ifHighSpeed";
+      }
+
+
+
+
+
+
+
+
+
+      container statistics {
+        description
+          "A collection of interface-related statistics objects.";
+
+        leaf discontinuity-time {
+          type yang:date-and-time;
+          mandatory true;
+          description
+            "The time on the most recent occasion at which any one or
+             more of this interface's counters suffered a
+             discontinuity.  If no such discontinuities have occurred
+             since the last re-initialization of the local management
+             subsystem, then this node contains the time the local
+             management subsystem re-initialized itself.";
+        }
+
+        leaf in-octets {
+          type yang:counter64;
+          description
+            "The total number of octets received on the interface,
+             including framing characters.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifHCInOctets";
+        }
+
+        leaf in-unicast-pkts {
+          type yang:counter64;
+          description
+            "The number of packets, delivered by this sub-layer to a
+             higher (sub-)layer, that were not addressed to a
+             multicast or broadcast address at this sub-layer.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts";
+        }
+
+
+
+
+        leaf in-broadcast-pkts {
+          type yang:counter64;
+          description
+            "The number of packets, delivered by this sub-layer to a
+             higher (sub-)layer, that were addressed to a broadcast
+             address at this sub-layer.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB -
+                       ifHCInBroadcastPkts";
+        }
+
+        leaf in-multicast-pkts {
+          type yang:counter64;
+          description
+            "The number of packets, delivered by this sub-layer to a
+             higher (sub-)layer, that were addressed to a multicast
+             address at this sub-layer.  For a MAC-layer protocol,
+             this includes both Group and Functional addresses.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB -
+                       ifHCInMulticastPkts";
+        }
+
+        leaf in-discards {
+          type yang:counter32;
+          description
+            "The number of inbound packets that were chosen to be
+             discarded even though no errors had been detected to
+             prevent their being deliverable to a higher-layer
+             protocol.  One possible reason for discarding such a
+             packet could be to free up buffer space.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+
+
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifInDiscards";
+        }
+
+        leaf in-errors {
+          type yang:counter32;
+          description
+            "For packet-oriented interfaces, the number of inbound
+             packets that contained errors preventing them from being
+             deliverable to a higher-layer protocol.  For character-
+             oriented or fixed-length interfaces, the number of
+             inbound transmission units that contained errors
+             preventing them from being deliverable to a higher-layer
+             protocol.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifInErrors";
+        }
+
+        leaf in-unknown-protos {
+          type yang:counter32;
+          description
+            "For packet-oriented interfaces, the number of packets
+             received via the interface that were discarded because
+             of an unknown or unsupported protocol.  For
+             character-oriented or fixed-length interfaces that
+             support protocol multiplexing, the number of
+             transmission units received via the interface that were
+             discarded because of an unknown or unsupported protocol.
+             For any interface that does not support protocol
+             multiplexing, this counter is not present.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";
+        }
+
+
+
+
+
+        leaf out-octets {
+          type yang:counter64;
+          description
+            "The total number of octets transmitted out of the
+             interface, including framing characters.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifHCOutOctets";
+        }
+
+        leaf out-unicast-pkts {
+          type yang:counter64;
+          description
+            "The total number of packets that higher-level protocols
+             requested be transmitted, and that were not addressed
+             to a multicast or broadcast address at this sub-layer,
+             including those that were discarded or not sent.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts";
+        }
+
+        leaf out-broadcast-pkts {
+          type yang:counter64;
+          description
+            "The total number of packets that higher-level protocols
+             requested be transmitted, and that were addressed to a
+             broadcast address at this sub-layer, including those
+             that were discarded or not sent.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB -
+                       ifHCOutBroadcastPkts";
+        }
+
+
+        leaf out-multicast-pkts {
+          type yang:counter64;
+          description
+            "The total number of packets that higher-level protocols
+             requested be transmitted, and that were addressed to a
+             multicast address at this sub-layer, including those
+             that were discarded or not sent.  For a MAC-layer
+             protocol, this includes both Group and Functional
+             addresses.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB -
+                       ifHCOutMulticastPkts";
+        }
+
+        leaf out-discards {
+          type yang:counter32;
+          description
+            "The number of outbound packets that were chosen to be
+             discarded even though no errors had been detected to
+             prevent their being transmitted.  One possible reason
+             for discarding such a packet could be to free up buffer
+             space.
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifOutDiscards";
+        }
+
+        leaf out-errors {
+          type yang:counter32;
+          description
+            "For packet-oriented interfaces, the number of outbound
+             packets that could not be transmitted because of errors.
+             For character-oriented or fixed-length interfaces, the
+             number of outbound transmission units that could not be
+             transmitted because of errors.
+
+
+
+
+             Discontinuities in the value of this counter can occur
+             at re-initialization of the management system, and at
+             other times as indicated by the value of
+             'discontinuity-time'.";
+          reference
+            "RFC 2863: The Interfaces Group MIB - ifOutErrors";
+        }
+      }
+    }
+  }
+}
diff --git a/tests/modules/yang/ietf-ip@2014-06-16.yang b/tests/modules/yang/ietf-ip@2014-06-16.yang
new file mode 100644
index 0000000..1499120
--- /dev/null
+++ b/tests/modules/yang/ietf-ip@2014-06-16.yang
@@ -0,0 +1,758 @@
+module ietf-ip {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-ip";
+ prefix ip;
+
+ import ietf-interfaces {
+   prefix if;
+ }
+ import ietf-inet-types {
+   prefix inet;
+ }
+ import ietf-yang-types {
+   prefix yang;
+ }
+
+ organization
+   "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+   "WG Web:   <http://tools.ietf.org/wg/netmod/>
+    WG List:  <mailto:netmod@ietf.org>
+
+    WG Chair: Thomas Nadeau
+              <mailto:tnadeau@lucidvision.com>
+
+    WG Chair: Juergen Schoenwaelder
+              <mailto:j.schoenwaelder@jacobs-university.de>
+
+    Editor:   Martin Bjorklund
+              <mailto:mbj@tail-f.com>";
+
+
+
+
+
+
+
+
+
+
+ description
+   "This module contains a collection of YANG definitions for
+    configuring IP implementations.
+
+    Copyright (c) 2014 IETF Trust and the persons identified as
+    authors of the code.  All rights reserved.
+
+    Redistribution and use in source and binary forms, with or
+    without modification, is permitted pursuant to, and subject
+    to the license terms contained in, the Simplified BSD License
+    set forth in Section 4.c of the IETF Trust's Legal Provisions
+    Relating to IETF Documents
+    (http://trustee.ietf.org/license-info).
+
+    This version of this YANG module is part of RFC 7277; see
+    the RFC itself for full legal notices.";
+
+ revision 2014-06-16 {
+   description
+     "Initial revision.";
+   reference
+     "RFC 7277: A YANG Data Model for IP Management";
+ }
+
+ /*
+
+  * Features
+  */
+
+ feature ipv4-non-contiguous-netmasks {
+   description
+     "Indicates support for configuring non-contiguous
+      subnet masks.";
+ }
+
+ feature ipv6-privacy-autoconf {
+   description
+     "Indicates support for Privacy Extensions for Stateless Address
+      Autoconfiguration in IPv6.";
+   reference
+     "RFC 4941: Privacy Extensions for Stateless Address
+                Autoconfiguration in IPv6";
+ }
+
+
+
+
+
+ /*
+  * Typedefs
+  */
+
+ typedef ip-address-origin {
+   type enumeration {
+     enum other {
+       description
+         "None of the following.";
+     }
+     enum static {
+       description
+         "Indicates that the address has been statically
+          configured - for example, using NETCONF or a Command Line
+          Interface.";
+     }
+     enum dhcp {
+       description
+         "Indicates an address that has been assigned to this
+          system by a DHCP server.";
+     }
+     enum link-layer {
+       description
+         "Indicates an address created by IPv6 stateless
+          autoconfiguration that embeds a link-layer address in its
+          interface identifier.";
+     }
+     enum random {
+       description
+         "Indicates an address chosen by the system at
+
+          random, e.g., an IPv4 address within 169.254/16, an
+          RFC 4941 temporary address, or an RFC 7217 semantically
+          opaque address.";
+       reference
+         "RFC 4941: Privacy Extensions for Stateless Address
+                    Autoconfiguration in IPv6
+          RFC 7217: A Method for Generating Semantically Opaque
+                    Interface Identifiers with IPv6 Stateless
+                    Address Autoconfiguration (SLAAC)";
+     }
+   }
+   description
+     "The origin of an address.";
+ }
+
+
+
+ typedef neighbor-origin {
+   type enumeration {
+     enum other {
+       description
+         "None of the following.";
+     }
+     enum static {
+       description
+         "Indicates that the mapping has been statically
+          configured - for example, using NETCONF or a Command Line
+          Interface.";
+     }
+     enum dynamic {
+       description
+         "Indicates that the mapping has been dynamically resolved
+          using, e.g., IPv4 ARP or the IPv6 Neighbor Discovery
+          protocol.";
+     }
+   }
+   description
+     "The origin of a neighbor entry.";
+ }
+
+ /*
+  * Configuration data nodes
+  */
+
+ augment "/if:interfaces/if:interface" {
+   description
+     "Parameters for configuring IP on interfaces.
+
+      If an interface is not capable of running IP, the server
+      must not allow the client to configure these parameters.";
+
+   container ipv4 {
+     presence
+       "Enables IPv4 unless the 'enabled' leaf
+        (which defaults to 'true') is set to 'false'";
+     description
+       "Parameters for the IPv4 address family.";
+
+
+
+
+
+
+
+
+     leaf enabled {
+       type boolean;
+       default true;
+       description
+         "Controls whether IPv4 is enabled or disabled on this
+          interface.  When IPv4 is enabled, this interface is
+          connected to an IPv4 stack, and the interface can send
+          and receive IPv4 packets.";
+     }
+     leaf forwarding {
+       type boolean;
+       default false;
+       description
+         "Controls IPv4 packet forwarding of datagrams received by,
+          but not addressed to, this interface.  IPv4 routers
+          forward datagrams.  IPv4 hosts do not (except those
+          source-routed via the host).";
+     }
+     leaf mtu {
+       type uint16 {
+         range "68..max";
+       }
+       units octets;
+       description
+         "The size, in octets, of the largest IPv4 packet that the
+          interface will send and receive.
+
+          The server may restrict the allowed values for this leaf,
+          depending on the interface's type.
+
+          If this leaf is not configured, the operationally used MTU
+          depends on the interface's type.";
+       reference
+         "RFC 791: Internet Protocol";
+     }
+     list address {
+       key "ip";
+       description
+         "The list of configured IPv4 addresses on the interface.";
+
+       leaf ip {
+         type inet:ipv4-address-no-zone;
+         description
+           "The IPv4 address on the interface.";
+       }
+
+
+
+       choice subnet {
+         mandatory true;
+         description
+           "The subnet can be specified as a prefix-length, or,
+            if the server supports non-contiguous netmasks, as
+            a netmask.";
+         leaf prefix-length {
+           type uint8 {
+             range "0..32";
+           }
+           description
+             "The length of the subnet prefix.";
+         }
+         leaf netmask {
+           if-feature ipv4-non-contiguous-netmasks;
+           type yang:dotted-quad;
+           description
+             "The subnet specified as a netmask.";
+         }
+       }
+     }
+     list neighbor {
+       key "ip";
+       description
+         "A list of mappings from IPv4 addresses to
+          link-layer addresses.
+
+          Entries in this list are used as static entries in the
+          ARP Cache.";
+       reference
+         "RFC 826: An Ethernet Address Resolution Protocol";
+
+       leaf ip {
+         type inet:ipv4-address-no-zone;
+         description
+           "The IPv4 address of the neighbor node.";
+       }
+       leaf link-layer-address {
+         type yang:phys-address;
+         mandatory true;
+         description
+           "The link-layer address of the neighbor node.";
+       }
+     }
+
+   }
+
+
+   container ipv6 {
+     presence
+       "Enables IPv6 unless the 'enabled' leaf
+        (which defaults to 'true') is set to 'false'";
+     description
+       "Parameters for the IPv6 address family.";
+
+     leaf enabled {
+       type boolean;
+       default true;
+       description
+         "Controls whether IPv6 is enabled or disabled on this
+          interface.  When IPv6 is enabled, this interface is
+          connected to an IPv6 stack, and the interface can send
+          and receive IPv6 packets.";
+     }
+     leaf forwarding {
+       type boolean;
+       default false;
+       description
+         "Controls IPv6 packet forwarding of datagrams received by,
+          but not addressed to, this interface.  IPv6 routers
+          forward datagrams.  IPv6 hosts do not (except those
+          source-routed via the host).";
+       reference
+         "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
+                    Section 6.2.1, IsRouter";
+     }
+     leaf mtu {
+       type uint32 {
+         range "1280..max";
+       }
+       units octets;
+       description
+         "The size, in octets, of the largest IPv6 packet that the
+          interface will send and receive.
+
+          The server may restrict the allowed values for this leaf,
+          depending on the interface's type.
+
+          If this leaf is not configured, the operationally used MTU
+          depends on the interface's type.";
+       reference
+         "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+                    Section 5";
+     }
+
+
+     list address {
+       key "ip";
+       description
+         "The list of configured IPv6 addresses on the interface.";
+
+       leaf ip {
+         type inet:ipv6-address-no-zone;
+         description
+           "The IPv6 address on the interface.";
+       }
+       leaf prefix-length {
+         type uint8 {
+           range "0..128";
+         }
+         mandatory true;
+         description
+           "The length of the subnet prefix.";
+       }
+     }
+     list neighbor {
+       key "ip";
+       description
+         "A list of mappings from IPv6 addresses to
+          link-layer addresses.
+
+          Entries in this list are used as static entries in the
+          Neighbor Cache.";
+       reference
+         "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)";
+
+       leaf ip {
+         type inet:ipv6-address-no-zone;
+         description
+           "The IPv6 address of the neighbor node.";
+       }
+       leaf link-layer-address {
+         type yang:phys-address;
+         mandatory true;
+         description
+           "The link-layer address of the neighbor node.";
+       }
+     }
+
+
+
+
+
+
+     leaf dup-addr-detect-transmits {
+       type uint32;
+       default 1;
+       description
+         "The number of consecutive Neighbor Solicitation messages
+          sent while performing Duplicate Address Detection on a
+          tentative address.  A value of zero indicates that
+          Duplicate Address Detection is not performed on
+          tentative addresses.  A value of one indicates a single
+          transmission with no follow-up retransmissions.";
+       reference
+         "RFC 4862: IPv6 Stateless Address Autoconfiguration";
+     }
+     container autoconf {
+       description
+         "Parameters to control the autoconfiguration of IPv6
+          addresses, as described in RFC 4862.";
+       reference
+         "RFC 4862: IPv6 Stateless Address Autoconfiguration";
+
+       leaf create-global-addresses {
+         type boolean;
+         default true;
+         description
+           "If enabled, the host creates global addresses as
+            described in RFC 4862.";
+         reference
+           "RFC 4862: IPv6 Stateless Address Autoconfiguration
+                      Section 5.5";
+       }
+       leaf create-temporary-addresses {
+         if-feature ipv6-privacy-autoconf;
+         type boolean;
+         default false;
+         description
+           "If enabled, the host creates temporary addresses as
+            described in RFC 4941.";
+         reference
+           "RFC 4941: Privacy Extensions for Stateless Address
+                      Autoconfiguration in IPv6";
+       }
+
+
+
+
+
+
+
+       leaf temporary-valid-lifetime {
+         if-feature ipv6-privacy-autoconf;
+         type uint32;
+         units "seconds";
+         default 604800;
+         description
+           "The time period during which the temporary address
+            is valid.";
+         reference
+           "RFC 4941: Privacy Extensions for Stateless Address
+                      Autoconfiguration in IPv6
+                      - TEMP_VALID_LIFETIME";
+       }
+       leaf temporary-preferred-lifetime {
+         if-feature ipv6-privacy-autoconf;
+         type uint32;
+         units "seconds";
+         default 86400;
+         description
+           "The time period during which the temporary address is
+            preferred.";
+         reference
+           "RFC 4941: Privacy Extensions for Stateless Address
+                      Autoconfiguration in IPv6
+                      - TEMP_PREFERRED_LIFETIME";
+       }
+     }
+   }
+ }
+
+ /*
+  * Operational state data nodes
+  */
+
+ augment "/if:interfaces-state/if:interface" {
+   description
+     "Data nodes for the operational state of IP on interfaces.";
+
+   container ipv4 {
+     presence "Present if IPv4 is enabled on this interface";
+     config false;
+     description
+       "Interface-specific parameters for the IPv4 address family.";
+
+
+
+
+
+     leaf forwarding {
+       type boolean;
+       description
+         "Indicates whether IPv4 packet forwarding is enabled or
+          disabled on this interface.";
+     }
+     leaf mtu {
+       type uint16 {
+         range "68..max";
+       }
+       units octets;
+       description
+         "The size, in octets, of the largest IPv4 packet that the
+          interface will send and receive.";
+       reference
+         "RFC 791: Internet Protocol";
+     }
+     list address {
+       key "ip";
+       description
+         "The list of IPv4 addresses on the interface.";
+
+       leaf ip {
+         type inet:ipv4-address-no-zone;
+         description
+           "The IPv4 address on the interface.";
+       }
+       choice subnet {
+         description
+           "The subnet can be specified as a prefix-length, or,
+            if the server supports non-contiguous netmasks, as
+            a netmask.";
+         leaf prefix-length {
+           type uint8 {
+             range "0..32";
+           }
+           description
+             "The length of the subnet prefix.";
+         }
+         leaf netmask {
+           if-feature ipv4-non-contiguous-netmasks;
+           type yang:dotted-quad;
+           description
+             "The subnet specified as a netmask.";
+         }
+       }
+
+
+       leaf origin {
+         type ip-address-origin;
+         description
+           "The origin of this address.";
+       }
+     }
+     list neighbor {
+       key "ip";
+       description
+         "A list of mappings from IPv4 addresses to
+          link-layer addresses.
+
+          This list represents the ARP Cache.";
+       reference
+         "RFC 826: An Ethernet Address Resolution Protocol";
+
+       leaf ip {
+         type inet:ipv4-address-no-zone;
+         description
+           "The IPv4 address of the neighbor node.";
+       }
+       leaf link-layer-address {
+         type yang:phys-address;
+         description
+           "The link-layer address of the neighbor node.";
+       }
+       leaf origin {
+         type neighbor-origin;
+         description
+           "The origin of this neighbor entry.";
+       }
+     }
+
+   }
+
+   container ipv6 {
+     presence "Present if IPv6 is enabled on this interface";
+     config false;
+     description
+       "Parameters for the IPv6 address family.";
+
+
+
+
+
+
+
+
+     leaf forwarding {
+       type boolean;
+       default false;
+       description
+         "Indicates whether IPv6 packet forwarding is enabled or
+          disabled on this interface.";
+       reference
+         "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
+                    Section 6.2.1, IsRouter";
+     }
+     leaf mtu {
+       type uint32 {
+         range "1280..max";
+       }
+       units octets;
+       description
+         "The size, in octets, of the largest IPv6 packet that the
+          interface will send and receive.";
+       reference
+         "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+                    Section 5";
+     }
+     list address {
+       key "ip";
+       description
+         "The list of IPv6 addresses on the interface.";
+
+       leaf ip {
+         type inet:ipv6-address-no-zone;
+         description
+           "The IPv6 address on the interface.";
+       }
+       leaf prefix-length {
+         type uint8 {
+           range "0..128";
+         }
+         mandatory true;
+         description
+           "The length of the subnet prefix.";
+       }
+       leaf origin {
+         type ip-address-origin;
+         description
+           "The origin of this address.";
+       }
+
+
+
+       leaf status {
+         type enumeration {
+           enum preferred {
+             description
+               "This is a valid address that can appear as the
+                destination or source address of a packet.";
+           }
+           enum deprecated {
+             description
+               "This is a valid but deprecated address that should
+                no longer be used as a source address in new
+                communications, but packets addressed to such an
+                address are processed as expected.";
+           }
+           enum invalid {
+             description
+               "This isn't a valid address, and it shouldn't appear
+                as the destination or source address of a packet.";
+           }
+           enum inaccessible {
+             description
+               "The address is not accessible because the interface
+                to which this address is assigned is not
+                operational.";
+           }
+           enum unknown {
+             description
+               "The status cannot be determined for some reason.";
+           }
+           enum tentative {
+             description
+               "The uniqueness of the address on the link is being
+                verified.  Addresses in this state should not be
+                used for general communication and should only be
+                used to determine the uniqueness of the address.";
+           }
+           enum duplicate {
+             description
+               "The address has been determined to be non-unique on
+                the link and so must not be used.";
+           }
+
+
+
+
+
+
+
+           enum optimistic {
+             description
+               "The address is available for use, subject to
+                restrictions, while its uniqueness on a link is
+                being verified.";
+           }
+         }
+         description
+           "The status of an address.  Most of the states correspond
+            to states from the IPv6 Stateless Address
+            Autoconfiguration protocol.";
+         reference
+           "RFC 4293: Management Information Base for the
+                      Internet Protocol (IP)
+                      - IpAddressStatusTC
+            RFC 4862: IPv6 Stateless Address Autoconfiguration";
+       }
+     }
+     list neighbor {
+       key "ip";
+       description
+         "A list of mappings from IPv6 addresses to
+          link-layer addresses.
+
+          This list represents the Neighbor Cache.";
+       reference
+         "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)";
+
+       leaf ip {
+         type inet:ipv6-address-no-zone;
+         description
+           "The IPv6 address of the neighbor node.";
+       }
+       leaf link-layer-address {
+         type yang:phys-address;
+         description
+           "The link-layer address of the neighbor node.";
+       }
+       leaf origin {
+         type neighbor-origin;
+         description
+           "The origin of this neighbor entry.";
+       }
+       leaf is-router {
+         type empty;
+         description
+           "Indicates that the neighbor node acts as a router.";
+       }
+       leaf state {
+         type enumeration {
+           enum incomplete {
+             description
+               "Address resolution is in progress, and the link-layer
+                address of the neighbor has not yet been
+                determined.";
+           }
+           enum reachable {
+             description
+               "Roughly speaking, the neighbor is known to have been
+                reachable recently (within tens of seconds ago).";
+           }
+           enum stale {
+             description
+               "The neighbor is no longer known to be reachable, but
+                until traffic is sent to the neighbor no attempt
+                should be made to verify its reachability.";
+           }
+           enum delay {
+             description
+               "The neighbor is no longer known to be reachable, and
+                traffic has recently been sent to the neighbor.
+                Rather than probe the neighbor immediately, however,
+                delay sending probes for a short while in order to
+                give upper-layer protocols a chance to provide
+                reachability confirmation.";
+           }
+           enum probe {
+             description
+               "The neighbor is no longer known to be reachable, and
+                unicast Neighbor Solicitation probes are being sent
+                to verify reachability.";
+           }
+         }
+         description
+           "The Neighbor Unreachability Detection state of this
+            entry.";
+         reference
+           "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
+                      Section 7.3.2";
+       }
+     }
+   }
+ }
+}
diff --git a/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang b/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang
new file mode 100644
index 0000000..bf4855f
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf-acm@2018-02-14.yang
@@ -0,0 +1,464 @@
+module ietf-netconf-acm {
+
+  namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-acm";
+
+  prefix nacm;
+
+  import ietf-yang-types {
+    prefix yang;
+  }
+
+  organization
+    "IETF NETCONF (Network Configuration) Working Group";
+
+  contact
+    "WG Web:   <https://datatracker.ietf.org/wg/netconf/>
+     WG List:  <mailto:netconf@ietf.org>
+
+     Author:   Andy Bierman
+               <mailto:andy@yumaworks.com>
+
+     Author:   Martin Bjorklund
+               <mailto:mbj@tail-f.com>";
+
+  description
+    "Network Configuration Access Control Model.
+
+     Copyright (c) 2012 - 2018 IETF Trust and the persons
+     identified as authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD
+     License set forth in Section 4.c of the IETF Trust's
+     Legal Provisions Relating to IETF Documents
+     (https://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC 8341; see
+     the RFC itself for full legal notices.";
+
+  revision "2018-02-14" {
+    description
+      "Added support for YANG 1.1 actions and notifications tied to
+       data nodes.  Clarified how NACM extensions can be used by
+       other data models.";
+    reference
+      "RFC 8341: Network Configuration Access Control Model";
+  }
+
+  revision "2012-02-22" {
+    description
+      "Initial version.";
+    reference
+      "RFC 6536: Network Configuration Protocol (NETCONF)
+                 Access Control Model";
+  }
+
+  /*
+   * Extension statements
+   */
+
+  extension default-deny-write {
+    description
+      "Used to indicate that the data model node
+       represents a sensitive security system parameter.
+
+       If present, the NETCONF server will only allow the designated
+       'recovery session' to have write access to the node.  An
+       explicit access control rule is required for all other users.
+
+       If the NACM module is used, then it must be enabled (i.e.,
+       /nacm/enable-nacm object equals 'true'), or this extension
+       is ignored.
+
+       The 'default-deny-write' extension MAY appear within a data
+       definition statement.  It is ignored otherwise.";
+  }
+
+  extension default-deny-all {
+    description
+      "Used to indicate that the data model node
+       controls a very sensitive security system parameter.
+
+       If present, the NETCONF server will only allow the designated
+       'recovery session' to have read, write, or execute access to
+       the node.  An explicit access control rule is required for all
+       other users.
+
+       If the NACM module is used, then it must be enabled (i.e.,
+       /nacm/enable-nacm object equals 'true'), or this extension
+       is ignored.
+
+       The 'default-deny-all' extension MAY appear within a data
+       definition statement, 'rpc' statement, or 'notification'
+       statement.  It is ignored otherwise.";
+  }
+
+  /*
+   * Derived types
+   */
+
+  typedef user-name-type {
+    type string {
+      length "1..max";
+    }
+    description
+      "General-purpose username string.";
+  }
+
+  typedef matchall-string-type {
+    type string {
+      pattern '\*';
+    }
+    description
+      "The string containing a single asterisk '*' is used
+       to conceptually represent all possible values
+       for the particular leaf using this data type.";
+  }
+
+  typedef access-operations-type {
+    type bits {
+      bit create {
+        description
+          "Any protocol operation that creates a
+           new data node.";
+      }
+      bit read {
+        description
+          "Any protocol operation or notification that
+           returns the value of a data node.";
+      }
+      bit update {
+        description
+          "Any protocol operation that alters an existing
+           data node.";
+      }
+      bit delete {
+        description
+          "Any protocol operation that removes a data node.";
+      }
+      bit exec {
+        description
+          "Execution access to the specified protocol operation.";
+      }
+    }
+    description
+      "Access operation.";
+  }
+
+  typedef group-name-type {
+    type string {
+      length "1..max";
+      pattern '[^\*].*';
+    }
+    description
+      "Name of administrative group to which
+       users can be assigned.";
+  }
+
+  typedef action-type {
+    type enumeration {
+      enum permit {
+        description
+          "Requested action is permitted.";
+      }
+      enum deny {
+        description
+          "Requested action is denied.";
+      }
+    }
+    description
+      "Action taken by the server when a particular
+       rule matches.";
+  }
+
+  typedef node-instance-identifier {
+    type yang:xpath1.0;
+    description
+      "Path expression used to represent a special
+       data node, action, or notification instance-identifier
+       string.
+
+       A node-instance-identifier value is an
+       unrestricted YANG instance-identifier expression.
+       All the same rules as an instance-identifier apply,
+       except that predicates for keys are optional.  If a key
+       predicate is missing, then the node-instance-identifier
+       represents all possible server instances for that key.
+
+       This XML Path Language (XPath) expression is evaluated in the
+       following context:
+
+          o  The set of namespace declarations are those in scope on
+             the leaf element where this type is used.
+
+          o  The set of variable bindings contains one variable,
+             'USER', which contains the name of the user of the
+             current session.
+
+          o  The function library is the core function library, but
+             note that due to the syntax restrictions of an
+             instance-identifier, no functions are allowed.
+
+          o  The context node is the root node in the data tree.
+
+       The accessible tree includes actions and notifications tied
+       to data nodes.";
+  }
+
+  /*
+   * Data definition statements
+   */
+
+  container nacm {
+    nacm:default-deny-all;
+
+    description
+      "Parameters for NETCONF access control model.";
+
+    leaf enable-nacm {
+      type boolean;
+      default "true";
+      description
+        "Enables or disables all NETCONF access control
+         enforcement.  If 'true', then enforcement
+         is enabled.  If 'false', then enforcement
+         is disabled.";
+    }
+
+    leaf read-default {
+      type action-type;
+      default "permit";
+      description
+        "Controls whether read access is granted if
+         no appropriate rule is found for a
+         particular read request.";
+    }
+
+    leaf write-default {
+      type action-type;
+      default "deny";
+      description
+        "Controls whether create, update, or delete access
+         is granted if no appropriate rule is found for a
+         particular write request.";
+    }
+
+    leaf exec-default {
+      type action-type;
+      default "permit";
+      description
+        "Controls whether exec access is granted if no appropriate
+         rule is found for a particular protocol operation request.";
+    }
+
+    leaf enable-external-groups {
+      type boolean;
+      default "true";
+      description
+        "Controls whether the server uses the groups reported by the
+         NETCONF transport layer when it assigns the user to a set of
+         NACM groups.  If this leaf has the value 'false', any group
+         names reported by the transport layer are ignored by the
+         server.";
+    }
+
+    leaf denied-operations {
+      type yang:zero-based-counter32;
+      config false;
+      mandatory true;
+      description
+        "Number of times since the server last restarted that a
+         protocol operation request was denied.";
+    }
+
+    leaf denied-data-writes {
+      type yang:zero-based-counter32;
+      config false;
+      mandatory true;
+      description
+        "Number of times since the server last restarted that a
+         protocol operation request to alter
+         a configuration datastore was denied.";
+    }
+
+    leaf denied-notifications {
+      type yang:zero-based-counter32;
+      config false;
+      mandatory true;
+      description
+        "Number of times since the server last restarted that
+         a notification was dropped for a subscription because
+         access to the event type was denied.";
+    }
+
+    container groups {
+      description
+        "NETCONF access control groups.";
+
+      list group {
+        key name;
+
+        description
+          "One NACM group entry.  This list will only contain
+           configured entries, not any entries learned from
+           any transport protocols.";
+
+        leaf name {
+          type group-name-type;
+          description
+            "Group name associated with this entry.";
+        }
+
+        leaf-list user-name {
+          type user-name-type;
+          description
+            "Each entry identifies the username of
+             a member of the group associated with
+             this entry.";
+        }
+      }
+    }
+
+    list rule-list {
+      key name;
+      ordered-by user;
+      description
+        "An ordered collection of access control rules.";
+
+      leaf name {
+        type string {
+          length "1..max";
+        }
+        description
+          "Arbitrary name assigned to the rule-list.";
+      }
+      leaf-list group {
+        type union {
+          type matchall-string-type;
+          type group-name-type;
+        }
+        description
+          "List of administrative groups that will be
+           assigned the associated access rights
+           defined by the 'rule' list.
+
+           The string '*' indicates that all groups apply to the
+           entry.";
+      }
+
+      list rule {
+        key name;
+        ordered-by user;
+        description
+          "One access control rule.
+
+           Rules are processed in user-defined order until a match is
+           found.  A rule matches if 'module-name', 'rule-type', and
+           'access-operations' match the request.  If a rule
+           matches, the 'action' leaf determines whether or not
+           access is granted.";
+
+        leaf name {
+          type string {
+            length "1..max";
+          }
+          description
+            "Arbitrary name assigned to the rule.";
+        }
+
+        leaf module-name {
+          type union {
+            type matchall-string-type;
+            type string;
+          }
+          default "*";
+          description
+            "Name of the module associated with this rule.
+
+             This leaf matches if it has the value '*' or if the
+             object being accessed is defined in the module with the
+             specified module name.";
+        }
+        choice rule-type {
+          description
+            "This choice matches if all leafs present in the rule
+             match the request.  If no leafs are present, the
+             choice matches all requests.";
+          case protocol-operation {
+            leaf rpc-name {
+              type union {
+                type matchall-string-type;
+                type string;
+              }
+              description
+                "This leaf matches if it has the value '*' or if
+                 its value equals the requested protocol operation
+                 name.";
+            }
+          }
+          case notification {
+            leaf notification-name {
+              type union {
+                type matchall-string-type;
+                type string;
+              }
+              description
+                "This leaf matches if it has the value '*' or if its
+                 value equals the requested notification name.";
+            }
+          }
+
+          case data-node {
+            leaf path {
+              type node-instance-identifier;
+              mandatory true;
+              description
+                "Data node instance-identifier associated with the
+                 data node, action, or notification controlled by
+                 this rule.
+
+                 Configuration data or state data
+                 instance-identifiers start with a top-level
+                 data node.  A complete instance-identifier is
+                 required for this type of path value.
+
+                 The special value '/' refers to all possible
+                 datastore contents.";
+            }
+          }
+        }
+
+        leaf access-operations {
+          type union {
+            type matchall-string-type;
+            type access-operations-type;
+          }
+          default "*";
+          description
+            "Access operations associated with this rule.
+
+             This leaf matches if it has the value '*' or if the
+             bit corresponding to the requested operation is set.";
+        }
+
+        leaf action {
+          type action-type;
+          mandatory true;
+          description
+            "The access control action associated with the
+             rule.  If a rule has been determined to match a
+             particular request, then this object is used
+             to determine whether to permit or deny the
+             request.";
+        }
+
+        leaf comment {
+          type string;
+          description
+            "A textual description of the access rule.";
+        }
+      }
+    }
+  }
+}
diff --git a/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang b/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang
new file mode 100644
index 0000000..31dce50
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf-nmda@2019-01-07.yang
@@ -0,0 +1,385 @@
+   module ietf-netconf-nmda {
+     yang-version 1.1;
+     namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-nmda";
+     prefix ncds;
+
+     import ietf-yang-types {
+       prefix yang;
+       reference
+         "RFC 6991: Common YANG Data Types";
+     }
+     import ietf-inet-types {
+       prefix inet;
+       reference
+         "RFC 6991: Common YANG Data Types";
+     }
+     import ietf-datastores {
+       prefix ds;
+       reference
+         "RFC 8342: Network Management Datastore Architecture
+                    (NMDA)";
+     }
+     import ietf-origin {
+       prefix or;
+       reference
+         "RFC 8342: Network Management Datastore Architecture
+                    (NMDA)";
+     }
+     import ietf-netconf {
+       prefix nc;
+       reference
+         "RFC 6241: Network Configuration Protocol (NETCONF)";
+     }
+     import ietf-netconf-with-defaults {
+       prefix ncwd;
+       reference
+         "RFC 6243: With-defaults Capability for NETCONF";
+     }
+
+     organization
+       "IETF NETCONF Working Group";
+
+     contact
+       "WG Web:   <https://datatracker.ietf.org/wg/netconf/>
+
+        WG List:  <mailto:netconf@ietf.org>
+
+        Author:   Martin Bjorklund
+                  <mailto:mbj@tail-f.com>
+
+        Author:   Juergen Schoenwaelder
+                  <mailto:j.schoenwaelder@jacobs-university.de>
+
+        Author:   Phil Shafer
+                  <mailto:phil@juniper.net>
+
+        Author:   Kent Watsen
+                  <mailto:kent+ietf@watsen.net>
+
+        Author:   Robert Wilton
+                  <mailto:rwilton@cisco.com>";
+     description
+       "This YANG module defines a set of NETCONF operations to support
+        the Network Management Datastore Architecture (NMDA).
+
+        The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
+        NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED',
+        'MAY', and 'OPTIONAL' in this document are to be interpreted as
+        described in BCP 14 (RFC 2119) (RFC 8174) when, and only when,
+        they appear in all capitals, as shown here.
+
+        Copyright (c) 2019 IETF Trust and the persons identified as
+        authors of the code.  All rights reserved.
+
+        Redistribution and use in source and binary forms, with or
+        without modification, is permitted pursuant to, and subject to
+        the license terms contained in, the Simplified BSD License set
+        forth in Section 4.c of the IETF Trust's Legal Provisions
+        Relating to IETF Documents
+        (https://trustee.ietf.org/license-info).
+
+        This version of this YANG module is part of RFC 8526; see
+        the RFC itself for full legal notices.";
+
+     revision 2019-01-07 {
+       description
+         "Initial revision.";
+       reference
+         "RFC 8526: NETCONF Extensions to Support the Network Management
+                    Datastore Architecture";
+     }
+
+     feature origin {
+       description
+         "Indicates that the server supports the 'origin' annotation.";
+       reference
+         "RFC 8342: Network Management Datastore Architecture (NMDA)";
+     }
+
+     feature with-defaults {
+       description
+         "NETCONF :with-defaults capability.  If the server advertises
+          the :with-defaults capability for a session, then this
+          feature must also be enabled for that session.  Otherwise,
+          this feature must not be enabled.";
+       reference
+         "RFC 6243: With-defaults Capability for NETCONF, Section 4; and
+          RFC 8526: NETCONF Extensions to Support the Network Management
+                    Datastore Architecture, Section 3.1.1.2";
+     }
+
+     rpc get-data {
+       description
+         "Retrieve data from an NMDA datastore.  The content returned
+          by get-data must satisfy all filters, i.e., the filter
+          criteria are logically ANDed.
+
+          Any ancestor nodes (including list keys) of nodes selected by
+          the filters are included in the response.
+
+          The 'with-origin' parameter is only valid for an operational
+          datastore.  If 'with-origin' is used with an invalid
+          datastore, then the server MUST return an <rpc-error> element
+          with an <error-tag> value of 'invalid-value'.
+
+          The 'with-defaults' parameter only applies to the operational
+          datastore if the NETCONF :with-defaults and
+          :with-operational-defaults capabilities are both advertised.
+          If the 'with-defaults' parameter is present in a request for
+          which it is not supported, then the server MUST return an
+          <rpc-error> element with an <error-tag> value of
+          'invalid-value'.";
+       input {
+         leaf datastore {
+           type ds:datastore-ref;
+           mandatory true;
+           description
+             "Datastore from which to retrieve data.
+
+              If the datastore is not supported by the server, then the
+              server MUST return an <rpc-error> element with an
+              <error-tag> value of 'invalid-value'.";
+         }
+         choice filter-spec {
+           description
+             "The content filter specification for this request.";
+           anydata subtree-filter {
+             description
+               "This parameter identifies the portions of the
+                target datastore to retrieve.";
+             reference
+               "RFC 6241: Network Configuration Protocol (NETCONF),
+                          Section 6";
+           }
+           leaf xpath-filter {
+             if-feature "nc:xpath";
+             type yang:xpath1.0;
+             description
+               "This parameter contains an XPath expression identifying
+                the portions of the target datastore to retrieve.
+
+                If the expression returns a node-set, all nodes in the
+                node-set are selected by the filter.  Otherwise, if the
+                expression does not return a node-set, then the
+                <get-data> operation fails.
+
+                The expression is evaluated in the following XPath
+                context:
+
+                  o  The set of namespace declarations are those in
+                     scope on the 'xpath-filter' leaf element.
+
+                  o  The set of variable bindings is empty.
+
+                  o  The function library is the core function library,
+                     and the XPath functions are defined in Section 10
+                     of RFC 7950.
+
+                  o  The context node is the root node of the target
+                     datastore.";
+           }
+         }
+         leaf config-filter {
+           type boolean;
+           description
+             "Filter for nodes with the given value for their 'config'
+              property.  When this leaf is set to 'true', only 'config
+              true' nodes are selected, and when set to 'false', only
+              'config false' nodes are selected.  If this leaf is not
+              present, no nodes are filtered.";
+         }
+         choice origin-filters {
+           when 'derived-from-or-self(datastore, "ds:operational")';
+           if-feature "origin";
+           description
+             "Filters configuration nodes based on the 'origin'
+              annotation.  Configuration nodes that do not have an
+              'origin' annotation are treated as if they have the
+              'origin' annotation 'or:unknown'.
+
+              System state nodes are not affected by origin-filters and
+              thus not filtered.  Note that system state nodes can be
+              filtered with the 'config-filter' leaf.";
+
+           leaf-list origin-filter {
+             type or:origin-ref;
+             description
+               "Filter based on the 'origin' annotation.  A
+                configuration node matches the filter if its 'origin'
+                annotation is derived from or equal to any of the given
+                filter values.";
+           }
+           leaf-list negated-origin-filter {
+             type or:origin-ref;
+             description
+               "Filter based on the 'origin' annotation.  A
+                configuration node matches the filter if its 'origin'
+                annotation is neither derived from nor equal to any of
+                the given filter values.";
+           }
+         }
+         leaf max-depth {
+           type union {
+             type uint16 {
+               range "1..65535";
+             }
+             type enumeration {
+               enum unbounded {
+                 description
+                   "All descendant nodes are included.";
+               }
+             }
+           }
+           default "unbounded";
+           description
+             "For each node selected by the filters, this parameter
+              selects how many conceptual subtree levels should be
+              returned in the reply.  If the depth is 1, the reply
+              includes just the selected nodes but no children.  If the
+              depth is 'unbounded', all descendant nodes are included.";
+         }
+         leaf with-origin {
+           when 'derived-from-or-self(../datastore, "ds:operational")';
+           if-feature "origin";
+           type empty;
+           description
+             "If this parameter is present, the server will return
+              the 'origin' annotation for the nodes that have one.";
+         }
+         uses ncwd:with-defaults-parameters {
+           if-feature "with-defaults";
+         }
+       }
+       output {
+         anydata data {
+           description
+             "Copy of the source datastore subset that matched
+              the filter criteria (if any).  An empty data
+              container indicates that the request did not
+              produce any results.";
+         }
+       }
+     }
+
+     rpc edit-data {
+       description
+         "Edit data in an NMDA datastore.
+
+          If an error condition occurs such that an error severity
+          <rpc-error> element is generated, the server will stop
+          processing the <edit-data> operation and restore the
+          specified configuration to its complete state at
+          the start of this <edit-data> operation.";
+       input {
+         leaf datastore {
+           type ds:datastore-ref;
+           mandatory true;
+           description
+             "Datastore that is the target of the <edit-data> operation.
+
+              If the target datastore is not writable, or is not
+              supported by the server, then the server MUST return an
+              <rpc-error> element with an <error-tag> value of
+              'invalid-value'.";
+         }
+         leaf default-operation {
+           type enumeration {
+             enum merge {
+               description
+                 "The default operation is merge.";
+             }
+             enum replace {
+               description
+                 "The default operation is replace.";
+             }
+             enum none {
+               description
+                 "There is no default operation.";
+             }
+           }
+           default "merge";
+           description
+             "The default operation to use.";
+         }
+         choice edit-content {
+           mandatory true;
+           description
+             "The content for the edit operation.";
+           anydata config {
+             description
+               "Inline config content.";
+           }
+           leaf url {
+             if-feature "nc:url";
+             type inet:uri;
+             description
+               "URL-based config content.";
+           }
+         }
+       }
+     }
+
+     /*
+      * Augment the <lock> and <unlock> operations with a
+      * "datastore" parameter.
+      */
+
+     augment "/nc:lock/nc:input/nc:target/nc:config-target" {
+       description
+         "Add NMDA datastore as target.";
+       leaf datastore {
+         type ds:datastore-ref;
+         description
+           "Datastore to lock.
+
+            The <lock> operation is only supported on writable
+            datastores.
+
+            If the <lock> operation is not supported by the server on
+            the specified target datastore, then the server MUST return
+            an <rpc-error> element with an <error-tag> value of
+            'invalid-value'.";
+       }
+     }
+
+     augment "/nc:unlock/nc:input/nc:target/nc:config-target" {
+       description
+         "Add NMDA datastore as target.";
+       leaf datastore {
+         type ds:datastore-ref;
+         description
+           "Datastore to unlock.
+
+            The <unlock> operation is only supported on writable
+            datastores.
+
+            If the <unlock> operation is not supported by the server on
+            the specified target datastore, then the server MUST return
+            an <rpc-error> element with an <error-tag> value of
+            'invalid-value'.";
+       }
+     }
+
+     /*
+      * Augment the <validate> operation with a
+      * "datastore" parameter.
+      */
+
+     augment "/nc:validate/nc:input/nc:source/nc:config-source" {
+       description
+         "Add NMDA datastore as source.";
+       leaf datastore {
+         type ds:datastore-ref;
+         description
+           "Datastore to validate.
+
+            The <validate> operation is supported only on configuration
+            datastores.
+
+            If the <validate> operation is not supported by the server
+            on the specified target datastore, then the server MUST
+            return an <rpc-error> element with an <error-tag> value of
+            'invalid-value'.";
+       }
+     }
+   }
diff --git a/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang b/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang
new file mode 100644
index 0000000..e19d2b3
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf-with-defaults@2011-06-01.yang
@@ -0,0 +1,140 @@
+module ietf-netconf-with-defaults {
+
+   namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults";
+
+   prefix ncwd;
+
+   import ietf-netconf { prefix nc; }
+
+   organization
+    "IETF NETCONF (Network Configuration Protocol) Working Group";
+
+   contact
+    "WG Web:   <http://tools.ietf.org/wg/netconf/>
+
+     WG List:  <netconf@ietf.org>
+
+     WG Chair: Bert Wijnen
+               <bertietf@bwijnen.net>
+
+     WG Chair: Mehmet Ersue
+               <mehmet.ersue@nsn.com>
+
+     Editor: Andy Bierman
+             <andy.bierman@brocade.com>
+
+     Editor: Balazs Lengyel
+             <balazs.lengyel@ericsson.com>";
+
+   description
+    "This module defines an extension to the NETCONF protocol
+     that allows the NETCONF client to control how default
+     values are handled by the server in particular NETCONF
+     operations.
+
+     Copyright (c) 2011 IETF Trust and the persons identified as
+     the document authors.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC 6243; see
+     the RFC itself for full legal notices.";
+
+   revision 2011-06-01 {
+     description
+       "Initial version.";
+     reference
+      "RFC 6243: With-defaults Capability for NETCONF";
+   }
+
+   typedef with-defaults-mode {
+      description
+        "Possible modes to report default data.";
+      reference
+         "RFC 6243; Section 3.";
+      type enumeration {
+         enum report-all {
+             description
+               "All default data is reported.";
+             reference
+               "RFC 6243; Section 3.1";
+         }
+         enum report-all-tagged {
+             description
+               "All default data is reported.
+                Any nodes considered to be default data
+                will contain a 'default' XML attribute,
+                set to 'true' or '1'.";
+             reference
+               "RFC 6243; Section 3.4";
+         }
+         enum trim {
+             description
+               "Values are not reported if they contain the default.";
+             reference
+               "RFC 6243; Section 3.2";
+         }
+         enum explicit {
+             description
+               "Report values that contain the definition of
+                explicitly set data.";
+             reference
+               "RFC 6243; Section 3.3";
+         }
+     }
+   }
+
+   grouping with-defaults-parameters {
+     description
+       "Contains the <with-defaults> parameter for control
+        of defaults in NETCONF retrieval operations.";
+
+     leaf with-defaults {
+       description
+         "The explicit defaults processing mode requested.";
+       reference
+         "RFC 6243; Section 4.5.1";
+
+       type with-defaults-mode;
+     }
+   }
+
+   // extending the get-config operation
+   augment /nc:get-config/nc:input {
+       description
+         "Adds the <with-defaults> parameter to the
+          input of the NETCONF <get-config> operation.";
+       reference
+         "RFC 6243; Section 4.5.1";
+
+       uses with-defaults-parameters;
+   }
+
+   // extending the get operation
+   augment /nc:get/nc:input {
+       description
+         "Adds the <with-defaults> parameter to
+          the input of the NETCONF <get> operation.";
+       reference
+         "RFC 6243; Section 4.5.1";
+
+       uses with-defaults-parameters;
+   }
+
+   // extending the copy-config operation
+   augment /nc:copy-config/nc:input {
+       description
+         "Adds the <with-defaults> parameter to
+          the input of the NETCONF <copy-config> operation.";
+       reference
+         "RFC 6243; Section 4.5.1";
+
+       uses with-defaults-parameters;
+   }
+
+}
diff --git a/tests/modules/yang/ietf-netconf@2011-06-01.yang b/tests/modules/yang/ietf-netconf@2011-06-01.yang
new file mode 100644
index 0000000..6449421
--- /dev/null
+++ b/tests/modules/yang/ietf-netconf@2011-06-01.yang
@@ -0,0 +1,934 @@
+module ietf-netconf {
+
+  // the namespace for NETCONF XML definitions is unchanged
+  // from RFC 4741, which this document replaces
+  namespace "urn:ietf:params:xml:ns:netconf:base:1.0";
+
+  prefix nc;
+
+  import ietf-inet-types {
+    prefix inet;
+  }
+
+  import ietf-netconf-acm { prefix nacm; }
+
+  organization
+    "IETF NETCONF (Network Configuration) Working Group";
+
+  contact
+    "WG Web:   <http://tools.ietf.org/wg/netconf/>
+     WG List:  <netconf@ietf.org>
+
+     WG Chair: Bert Wijnen
+               <bertietf@bwijnen.net>
+
+     WG Chair: Mehmet Ersue
+               <mehmet.ersue@nsn.com>
+
+     Editor:   Martin Bjorklund
+               <mbj@tail-f.com>
+
+     Editor:   Juergen Schoenwaelder
+               <j.schoenwaelder@jacobs-university.de>
+
+     Editor:   Andy Bierman
+               <andy.bierman@brocade.com>";
+  description
+    "NETCONF Protocol Data Types and Protocol Operations.
+
+     Copyright (c) 2011 IETF Trust and the persons identified as
+     the document authors.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC 6241; see
+     the RFC itself for full legal notices.";
+
+  revision 2011-06-01 {
+    description
+      "Initial revision;
+       2013-09-29: Updated to include NACM attributes, 
+       as specified in RFC 6536: sec 3.2.5 and 3.2.8";
+    reference
+      "RFC 6241: Network Configuration Protocol";
+  }
+
+  extension get-filter-element-attributes {
+    description
+      "If this extension is present within an 'anyxml'
+       statement named 'filter', which must be conceptually
+       defined within the RPC input section for the <get>
+       and <get-config> protocol operations, then the
+       following unqualified XML attribute is supported
+       within the <filter> element, within a <get> or
+       <get-config> protocol operation:
+
+         type : optional attribute with allowed
+                value strings 'subtree' and 'xpath'.
+                If missing, the default value is 'subtree'.
+
+       If the 'xpath' feature is supported, then the
+       following unqualified XML attribute is
+       also supported:
+
+         select: optional attribute containing a
+                 string representing an XPath expression.
+                 The 'type' attribute must be equal to 'xpath'
+                 if this attribute is present.";
+  }
+
+  // NETCONF capabilities defined as features
+  feature writable-running {
+    description
+      "NETCONF :writable-running capability;
+       If the server advertises the :writable-running
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.2";
+  }
+
+  feature candidate {
+    description
+      "NETCONF :candidate capability;
+       If the server advertises the :candidate
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.3";
+  }
+
+  feature confirmed-commit {
+    if-feature candidate;
+    description
+      "NETCONF :confirmed-commit:1.1 capability;
+       If the server advertises the :confirmed-commit:1.1
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+
+    reference "RFC 6241, Section 8.4";
+  }
+
+  feature rollback-on-error {
+    description
+      "NETCONF :rollback-on-error capability;
+       If the server advertises the :rollback-on-error
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.5";
+  }
+
+  feature validate {
+    description
+      "NETCONF :validate:1.1 capability;
+       If the server advertises the :validate:1.1
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.6";
+  }
+
+  feature startup {
+    description
+      "NETCONF :startup capability;
+       If the server advertises the :startup
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.7";
+  }
+
+  feature url {
+    description
+      "NETCONF :url capability;
+       If the server advertises the :url
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.8";
+  }
+
+  feature xpath {
+    description
+      "NETCONF :xpath capability;
+       If the server advertises the :xpath
+       capability for a session, then this feature must
+       also be enabled for that session.  Otherwise,
+       this feature must not be enabled.";
+    reference "RFC 6241, Section 8.9";
+  }
+
+  // NETCONF Simple Types
+
+  typedef session-id-type {
+    type uint32 {
+      range "1..max";
+    }
+    description
+      "NETCONF Session Id";
+  }
+
+  typedef session-id-or-zero-type {
+    type uint32;
+    description
+      "NETCONF Session Id or Zero to indicate none";
+  }
+  typedef error-tag-type {
+    type enumeration {
+       enum in-use {
+         description
+           "The request requires a resource that
+            already is in use.";
+       }
+       enum invalid-value {
+         description
+           "The request specifies an unacceptable value for one
+            or more parameters.";
+       }
+       enum too-big {
+         description
+           "The request or response (that would be generated) is
+            too large for the implementation to handle.";
+       }
+       enum missing-attribute {
+         description
+           "An expected attribute is missing.";
+       }
+       enum bad-attribute {
+         description
+           "An attribute value is not correct; e.g., wrong type,
+            out of range, pattern mismatch.";
+       }
+       enum unknown-attribute {
+         description
+           "An unexpected attribute is present.";
+       }
+       enum missing-element {
+         description
+           "An expected element is missing.";
+       }
+       enum bad-element {
+         description
+           "An element value is not correct; e.g., wrong type,
+            out of range, pattern mismatch.";
+       }
+       enum unknown-element {
+         description
+           "An unexpected element is present.";
+       }
+       enum unknown-namespace {
+         description
+           "An unexpected namespace is present.";
+       }
+       enum access-denied {
+         description
+           "Access to the requested protocol operation or
+            data model is denied because authorization failed.";
+       }
+       enum lock-denied {
+         description
+           "Access to the requested lock is denied because the
+            lock is currently held by another entity.";
+       }
+       enum resource-denied {
+         description
+           "Request could not be completed because of
+            insufficient resources.";
+       }
+       enum rollback-failed {
+         description
+           "Request to roll back some configuration change (via
+            rollback-on-error or <discard-changes> operations)
+            was not completed for some reason.";
+
+       }
+       enum data-exists {
+         description
+           "Request could not be completed because the relevant
+            data model content already exists.  For example,
+            a 'create' operation was attempted on data that
+            already exists.";
+       }
+       enum data-missing {
+         description
+           "Request could not be completed because the relevant
+            data model content does not exist.  For example,
+            a 'delete' operation was attempted on
+            data that does not exist.";
+       }
+       enum operation-not-supported {
+         description
+           "Request could not be completed because the requested
+            operation is not supported by this implementation.";
+       }
+       enum operation-failed {
+         description
+           "Request could not be completed because the requested
+            operation failed for some reason not covered by
+            any other error condition.";
+       }
+       enum partial-operation {
+         description
+           "This error-tag is obsolete, and SHOULD NOT be sent
+            by servers conforming to this document.";
+       }
+       enum malformed-message {
+         description
+           "A message could not be handled because it failed to
+            be parsed correctly.  For example, the message is not
+            well-formed XML or it uses an invalid character set.";
+       }
+     }
+     description "NETCONF Error Tag";
+     reference "RFC 6241, Appendix A";
+  }
+
+  typedef error-severity-type {
+    type enumeration {
+      enum error {
+        description "Error severity";
+      }
+      enum warning {
+        description "Warning severity";
+      }
+    }
+    description "NETCONF Error Severity";
+    reference "RFC 6241, Section 4.3";
+  }
+
+  typedef edit-operation-type {
+    type enumeration {
+      enum merge {
+        description
+          "The configuration data identified by the
+           element containing this attribute is merged
+           with the configuration at the corresponding
+           level in the configuration datastore identified
+           by the target parameter.";
+      }
+      enum replace {
+        description
+          "The configuration data identified by the element
+           containing this attribute replaces any related
+           configuration in the configuration datastore
+           identified by the target parameter.  If no such
+           configuration data exists in the configuration
+           datastore, it is created.  Unlike a
+           <copy-config> operation, which replaces the
+           entire target configuration, only the configuration
+           actually present in the config parameter is affected.";
+      }
+      enum create {
+        description
+          "The configuration data identified by the element
+           containing this attribute is added to the
+           configuration if and only if the configuration
+           data does not already exist in the configuration
+           datastore.  If the configuration data exists, an
+           <rpc-error> element is returned with an
+           <error-tag> value of 'data-exists'.";
+      }
+      enum delete {
+        description
+          "The configuration data identified by the element
+           containing this attribute is deleted from the
+           configuration if and only if the configuration
+           data currently exists in the configuration
+           datastore.  If the configuration data does not
+           exist, an <rpc-error> element is returned with
+           an <error-tag> value of 'data-missing'.";
+      }
+      enum remove {
+        description
+          "The configuration data identified by the element
+           containing this attribute is deleted from the
+           configuration if the configuration
+           data currently exists in the configuration
+           datastore.  If the configuration data does not
+           exist, the 'remove' operation is silently ignored
+           by the server.";
+      }
+    }
+    default "merge";
+    description "NETCONF 'operation' attribute values";
+    reference "RFC 6241, Section 7.2";
+  }
+
+  // NETCONF Standard Protocol Operations
+
+  rpc get-config {
+    description
+      "Retrieve all or part of a specified configuration.";
+
+    reference "RFC 6241, Section 7.1";
+
+    input {
+      container source {
+        description
+          "Particular configuration to retrieve.";
+
+        choice config-source {
+          mandatory true;
+          description
+            "The configuration to retrieve.";
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config source.";
+          }
+          leaf running {
+            type empty;
+            description
+              "The running configuration is the config source.";
+          }
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config source.
+               This is optional-to-implement on the server because
+               not all servers will support filtering for this
+               datastore.";
+          }
+        }
+      }
+
+      anyxml filter {
+        description
+          "Subtree or XPath filter to use.";
+        nc:get-filter-element-attributes;
+      }
+    }
+
+    output {
+      anyxml data {
+        description
+          "Copy of the source datastore subset that matched
+           the filter criteria (if any).  An empty data container
+           indicates that the request did not produce any results.";
+      }
+    }
+  }
+
+  rpc edit-config {
+    description
+      "The <edit-config> operation loads all or part of a specified
+       configuration to the specified target configuration.";
+
+    reference "RFC 6241, Section 7.2";
+
+    input {
+      container target {
+        description
+          "Particular configuration to edit.";
+
+        choice config-target {
+          mandatory true;
+          description
+            "The configuration target.";
+
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config target.";
+          }
+          leaf running {
+            if-feature writable-running;
+            type empty;
+            description
+              "The running configuration is the config source.";
+          }
+        }
+      }
+
+      leaf default-operation {
+        type enumeration {
+          enum merge {
+            description
+              "The default operation is merge.";
+          }
+          enum replace {
+            description
+              "The default operation is replace.";
+          }
+          enum none {
+            description
+              "There is no default operation.";
+          }
+        }
+        default "merge";
+        description
+          "The default operation to use.";
+      }
+
+      leaf test-option {
+        if-feature validate;
+        type enumeration {
+          enum test-then-set {
+            description
+              "The server will test and then set if no errors.";
+          }
+          enum set {
+            description
+              "The server will set without a test first.";
+          }
+
+          enum test-only {
+            description
+              "The server will only test and not set, even
+               if there are no errors.";
+          }
+        }
+        default "test-then-set";
+        description
+          "The test option to use.";
+      }
+
+      leaf error-option {
+        type enumeration {
+          enum stop-on-error {
+            description
+              "The server will stop on errors.";
+          }
+          enum continue-on-error {
+            description
+              "The server may continue on errors.";
+          }
+          enum rollback-on-error {
+            description
+              "The server will roll back on errors.
+               This value can only be used if the 'rollback-on-error'
+               feature is supported.";
+          }
+        }
+        default "stop-on-error";
+        description
+          "The error option to use.";
+      }
+
+      choice edit-content {
+        mandatory true;
+        description
+          "The content for the edit operation.";
+
+        anyxml config {
+          description
+            "Inline Config content.";
+        }
+        leaf url {
+          if-feature url;
+          type inet:uri;
+          description
+            "URL-based config content.";
+        }
+      }
+    }
+  }
+
+  rpc copy-config {
+    description
+      "Create or replace an entire configuration datastore with the
+       contents of another complete configuration datastore.";
+
+    reference "RFC 6241, Section 7.3";
+
+    input {
+      container target {
+        description
+          "Particular configuration to copy to.";
+
+        choice config-target {
+          mandatory true;
+          description
+            "The configuration target of the copy operation.";
+
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config target.";
+          }
+          leaf running {
+            if-feature writable-running;
+            type empty;
+            description
+              "The running configuration is the config target.
+               This is optional-to-implement on the server.";
+          }
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config target.";
+          }
+          leaf url {
+            if-feature url;
+            type inet:uri;
+            description
+              "The URL-based configuration is the config target.";
+          }
+        }
+      }
+
+      container source {
+        description
+          "Particular configuration to copy from.";
+
+        choice config-source {
+          mandatory true;
+          description
+            "The configuration source for the copy operation.";
+
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config source.";
+          }
+          leaf running {
+            type empty;
+            description
+              "The running configuration is the config source.";
+          }
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config source.";
+          }
+          leaf url {
+            if-feature url;
+            type inet:uri;
+            description
+              "The URL-based configuration is the config source.";
+          }
+          anyxml config {
+            description
+              "Inline Config content: <config> element.  Represents
+               an entire configuration datastore, not
+               a subset of the running datastore.";
+          }
+        }
+      }
+    }
+  }
+
+  rpc delete-config {
+    nacm:default-deny-all;
+    description
+      "Delete a configuration datastore.";
+
+    reference "RFC 6241, Section 7.4";
+
+    input {
+      container target {
+        description
+          "Particular configuration to delete.";
+
+        choice config-target {
+          mandatory true;
+          description
+            "The configuration target to delete.";
+
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config target.";
+          }
+          leaf url {
+            if-feature url;
+            type inet:uri;
+            description
+              "The URL-based configuration is the config target.";
+          }
+        }
+      }
+    }
+  }
+
+  rpc lock {
+    description
+      "The lock operation allows the client to lock the configuration
+       system of a device.";
+
+    reference "RFC 6241, Section 7.5";
+
+    input {
+      container target {
+        description
+          "Particular configuration to lock.";
+
+        choice config-target {
+          mandatory true;
+          description
+            "The configuration target to lock.";
+
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config target.";
+          }
+          leaf running {
+            type empty;
+            description
+              "The running configuration is the config target.";
+          }
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config target.";
+          }
+        }
+      }
+    }
+  }
+
+  rpc unlock {
+    description
+      "The unlock operation is used to release a configuration lock,
+       previously obtained with the 'lock' operation.";
+
+    reference "RFC 6241, Section 7.6";
+
+    input {
+      container target {
+        description
+          "Particular configuration to unlock.";
+
+        choice config-target {
+          mandatory true;
+          description
+            "The configuration target to unlock.";
+
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config target.";
+          }
+          leaf running {
+            type empty;
+            description
+              "The running configuration is the config target.";
+          }
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config target.";
+          }
+        }
+      }
+    }
+  }
+
+  rpc get {
+    description
+      "Retrieve running configuration and device state information.";
+
+    reference "RFC 6241, Section 7.7";
+
+    input {
+      anyxml filter {
+        description
+          "This parameter specifies the portion of the system
+           configuration and state data to retrieve.";
+        nc:get-filter-element-attributes;
+      }
+    }
+
+    output {
+      anyxml data {
+        description
+          "Copy of the running datastore subset and/or state
+           data that matched the filter criteria (if any).
+           An empty data container indicates that the request did not
+           produce any results.";
+      }
+    }
+  }
+
+  rpc close-session {
+    description
+      "Request graceful termination of a NETCONF session.";
+
+    reference "RFC 6241, Section 7.8";
+  }
+
+  rpc kill-session {
+    nacm:default-deny-all;
+    description
+      "Force the termination of a NETCONF session.";
+
+    reference "RFC 6241, Section 7.9";
+
+    input {
+      leaf session-id {
+        type session-id-type;
+        mandatory true;
+        description
+          "Particular session to kill.";
+      }
+    }
+  }
+
+  rpc commit {
+    if-feature candidate;
+
+    description
+      "Commit the candidate configuration as the device's new
+       current configuration.";
+
+    reference "RFC 6241, Section 8.3.4.1";
+
+    input {
+      leaf confirmed {
+        if-feature confirmed-commit;
+        type empty;
+        description
+          "Requests a confirmed commit.";
+        reference "RFC 6241, Section 8.3.4.1";
+      }
+
+      leaf confirm-timeout {
+        if-feature confirmed-commit;
+        type uint32 {
+          range "1..max";
+        }
+        units "seconds";
+        default "600";   // 10 minutes
+        description
+          "The timeout interval for a confirmed commit.";
+        reference "RFC 6241, Section 8.3.4.1";
+      }
+
+      leaf persist {
+        if-feature confirmed-commit;
+        type string;
+        description
+          "This parameter is used to make a confirmed commit
+           persistent.  A persistent confirmed commit is not aborted
+           if the NETCONF session terminates.  The only way to abort
+           a persistent confirmed commit is to let the timer expire,
+           or to use the <cancel-commit> operation.
+
+           The value of this parameter is a token that must be given
+           in the 'persist-id' parameter of <commit> or
+           <cancel-commit> operations in order to confirm or cancel
+           the persistent confirmed commit.
+
+           The token should be a random string.";
+        reference "RFC 6241, Section 8.3.4.1";
+      }
+
+      leaf persist-id {
+        if-feature confirmed-commit;
+        type string;
+        description
+          "This parameter is given in order to commit a persistent
+           confirmed commit.  The value must be equal to the value
+           given in the 'persist' parameter to the <commit> operation.
+           If it does not match, the operation fails with an
+          'invalid-value' error.";
+        reference "RFC 6241, Section 8.3.4.1";
+      }
+
+    }
+  }
+
+  rpc discard-changes {
+    if-feature candidate;
+
+    description
+      "Revert the candidate configuration to the current
+       running configuration.";
+    reference "RFC 6241, Section 8.3.4.2";
+  }
+
+  rpc cancel-commit {
+    if-feature confirmed-commit;
+    description
+      "This operation is used to cancel an ongoing confirmed commit.
+       If the confirmed commit is persistent, the parameter
+       'persist-id' must be given, and it must match the value of the
+       'persist' parameter.";
+    reference "RFC 6241, Section 8.4.4.1";
+
+    input {
+      leaf persist-id {
+        type string;
+        description
+          "This parameter is given in order to cancel a persistent
+           confirmed commit.  The value must be equal to the value
+           given in the 'persist' parameter to the <commit> operation.
+           If it does not match, the operation fails with an
+          'invalid-value' error.";
+      }
+    }
+  }
+
+  rpc validate {
+    if-feature validate;
+
+    description
+      "Validates the contents of the specified configuration.";
+
+    reference "RFC 6241, Section 8.6.4.1";
+
+    input {
+      container source {
+        description
+          "Particular configuration to validate.";
+
+        choice config-source {
+          mandatory true;
+          description
+            "The configuration source to validate.";
+
+          leaf candidate {
+            if-feature candidate;
+            type empty;
+            description
+              "The candidate configuration is the config source.";
+          }
+          leaf running {
+            type empty;
+            description
+              "The running configuration is the config source.";
+          }
+          leaf startup {
+            if-feature startup;
+            type empty;
+            description
+              "The startup configuration is the config source.";
+          }
+          leaf url {
+            if-feature url;
+            type inet:uri;
+            description
+              "The URL-based configuration is the config source.";
+          }
+          anyxml config {
+            description
+              "Inline Config content: <config> element.  Represents
+               an entire configuration datastore, not
+               a subset of the running datastore.";
+          }
+        }
+      }
+    }
+  }
+
+}
diff --git a/tests/modules/yang/ietf-origin@2018-02-14.yang b/tests/modules/yang/ietf-origin@2018-02-14.yang
new file mode 100644
index 0000000..3080c91
--- /dev/null
+++ b/tests/modules/yang/ietf-origin@2018-02-14.yang
@@ -0,0 +1,147 @@
+module ietf-origin {
+  yang-version 1.1;
+  namespace "urn:ietf:params:xml:ns:yang:ietf-origin";
+  prefix or;
+
+  import ietf-yang-metadata {
+    prefix md;
+  }
+
+  organization
+    "IETF Network Modeling (NETMOD) Working Group";
+
+  contact
+    "WG Web:   <https://datatracker.ietf.org/wg/netmod/>
+
+     WG List:  <mailto:netmod@ietf.org>
+
+     Author:   Martin Bjorklund
+               <mailto:mbj@tail-f.com>
+
+     Author:   Juergen Schoenwaelder
+               <mailto:j.schoenwaelder@jacobs-university.de>
+
+     Author:   Phil Shafer
+               <mailto:phil@juniper.net>
+
+     Author:   Kent Watsen
+               <mailto:kwatsen@juniper.net>
+
+     Author:   Rob Wilton
+               <rwilton@cisco.com>";
+
+  description
+    "This YANG module defines an 'origin' metadata annotation and a
+     set of identities for the origin value.
+
+     Copyright (c) 2018 IETF Trust and the persons identified as
+     authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject to
+     the license terms contained in, the Simplified BSD License set
+     forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (https://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC 8342
+     (https://www.rfc-editor.org/info/rfc8342); see the RFC itself
+     for full legal notices.";
+
+  revision 2018-02-14 {
+    description
+      "Initial revision.";
+    reference
+      "RFC 8342: Network Management Datastore Architecture (NMDA)";
+  }
+
+  /*
+   * Identities
+   */
+
+  identity origin {
+    description
+      "Abstract base identity for the origin annotation.";
+  }
+
+  identity intended {
+    base origin;
+    description
+      "Denotes configuration from the intended configuration
+       datastore.";
+  }
+
+  identity dynamic {
+    base origin;
+    description
+      "Denotes configuration from a dynamic configuration
+       datastore.";
+  }
+
+  identity system {
+    base origin;
+    description
+      "Denotes configuration originated by the system itself.
+
+       Examples of system configuration include applied configuration
+       for an always-existing loopback interface, or interface
+       configuration that is auto-created due to the hardware
+       currently present in the device.";
+  }
+
+  identity learned {
+    base origin;
+    description
+      "Denotes configuration learned from protocol interactions with
+       other devices, instead of via either the intended
+       configuration datastore or any dynamic configuration
+       datastore.
+
+       Examples of protocols that provide learned configuration
+       include link-layer negotiations, routing protocols, and
+       DHCP.";
+  }
+
+  identity default {
+    base origin;
+    description
+      "Denotes configuration that does not have a configured or
+       learned value but has a default value in use.  Covers both
+       values defined in a 'default' statement and values defined
+       via an explanation in a 'description' statement.";
+  }
+
+  identity unknown {
+    base origin;
+    description
+      "Denotes configuration for which the system cannot identify the
+       origin.";
+  }
+
+  /*
+   * Type definitions
+   */
+
+  typedef origin-ref {
+    type identityref {
+      base origin;
+    }
+    description
+      "An origin identity reference.";
+  }
+
+  /*
+   * Metadata annotations
+   */
+
+  md:annotation origin {
+    type origin-ref;
+    description
+      "The 'origin' annotation can be present on any configuration
+       data node in the operational state datastore.  It specifies
+       from where the node originated.  If not specified for a given
+       configuration data node, then the origin is the same as the
+       origin of its parent node in the data tree.  The origin for
+       any top-level configuration data nodes must be specified.";
+  }
+}
diff --git a/tests/modules/yang/ietf-restconf@2017-01-26.yang b/tests/modules/yang/ietf-restconf@2017-01-26.yang
new file mode 100644
index 0000000..b47455b
--- /dev/null
+++ b/tests/modules/yang/ietf-restconf@2017-01-26.yang
@@ -0,0 +1,278 @@
+module ietf-restconf {
+  yang-version 1.1;
+  namespace "urn:ietf:params:xml:ns:yang:ietf-restconf";
+  prefix "rc";
+
+  organization
+    "IETF NETCONF (Network Configuration) Working Group";
+
+  contact
+    "WG Web:   <https://datatracker.ietf.org/wg/netconf/>
+     WG List:  <mailto:netconf@ietf.org>
+
+     Author:   Andy Bierman
+               <mailto:andy@yumaworks.com>
+
+     Author:   Martin Bjorklund
+               <mailto:mbj@tail-f.com>
+
+     Author:   Kent Watsen
+               <mailto:kwatsen@juniper.net>";
+
+  description
+    "This module contains conceptual YANG specifications
+     for basic RESTCONF media type definitions used in
+     RESTCONF protocol messages.
+
+     Note that the YANG definitions within this module do not
+     represent configuration data of any kind.
+     The 'restconf-media-type' YANG extension statement
+     provides a normative syntax for XML and JSON
+     message-encoding purposes.
+
+     Copyright (c) 2017 IETF Trust and the persons identified as
+     authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC 8040; see
+     the RFC itself for full legal notices.";
+
+  revision 2017-01-26 {
+    description
+      "Initial revision.";
+    reference
+      "RFC 8040: RESTCONF Protocol.";
+  }
+
+  extension yang-data {
+    argument name {
+      yin-element true;
+    }
+    description
+      "This extension is used to specify a YANG data template that
+       represents conceptual data defined in YANG.  It is
+       intended to describe hierarchical data independent of
+       protocol context or specific message-encoding format.
+       Data definition statements within a yang-data extension
+       specify the generic syntax for the specific YANG data
+       template, whose name is the argument of the 'yang-data'
+       extension statement.
+
+       Note that this extension does not define a media type.
+       A specification using this extension MUST specify the
+       message-encoding rules, including the content media type.
+
+       The mandatory 'name' parameter value identifies the YANG
+       data template that is being defined.  It contains the
+       template name.
+
+       This extension is ignored unless it appears as a top-level
+       statement.  It MUST contain data definition statements
+       that result in exactly one container data node definition.
+       An instance of a YANG data template can thus be translated
+       into an XML instance document, whose top-level element
+       corresponds to the top-level container.
+       The module name and namespace values for the YANG module using
+       the extension statement are assigned to instance document data
+       conforming to the data definition statements within
+       this extension.
+
+       The substatements of this extension MUST follow the
+       'data-def-stmt' rule in the YANG ABNF.
+
+       The XPath document root is the extension statement itself,
+       such that the child nodes of the document root are
+       represented by the data-def-stmt substatements within
+       this extension.  This conceptual document is the context
+       for the following YANG statements:
+
+         - must-stmt
+         - when-stmt
+         - path-stmt
+         - min-elements-stmt
+         - max-elements-stmt
+         - mandatory-stmt
+         - unique-stmt
+         - ordered-by
+         - instance-identifier data type
+
+       The following data-def-stmt substatements are constrained
+       when used within a 'yang-data' extension statement.
+
+         - The list-stmt is not required to have a key-stmt defined.
+         - The if-feature-stmt is ignored if present.
+         - The config-stmt is ignored if present.
+         - The available identity values for any 'identityref'
+           leaf or leaf-list nodes are limited to the module
+           containing this extension statement and the modules
+           imported into that module.
+      ";
+  }
+
+  rc:yang-data yang-errors {
+    uses errors;
+  }
+
+  rc:yang-data yang-api {
+    uses restconf;
+  }
+
+  grouping errors {
+    description
+      "A grouping that contains a YANG container
+       representing the syntax and semantics of a
+       YANG Patch error report within a response message.";
+
+    container errors {
+      description
+        "Represents an error report returned by the server if
+         a request results in an error.";
+
+      list error {
+        description
+          "An entry containing information about one
+           specific error that occurred while processing
+           a RESTCONF request.";
+        reference
+          "RFC 6241, Section 4.3.";
+
+        leaf error-type {
+          type enumeration {
+            enum transport {
+              description
+                "The transport layer.";
+            }
+            enum rpc {
+              description
+                "The rpc or notification layer.";
+            }
+            enum protocol {
+              description
+                "The protocol operation layer.";
+            }
+            enum application {
+              description
+                "The server application layer.";
+            }
+          }
+          mandatory true;
+          description
+            "The protocol layer where the error occurred.";
+        }
+
+        leaf error-tag {
+          type string;
+          mandatory true;
+          description
+            "The enumerated error-tag.";
+        }
+
+        leaf error-app-tag {
+          type string;
+          description
+            "The application-specific error-tag.";
+        }
+
+        leaf error-path {
+          type instance-identifier;
+          description
+            "The YANG instance identifier associated
+             with the error node.";
+        }
+
+        leaf error-message {
+          type string;
+          description
+            "A message describing the error.";
+        }
+
+        anydata error-info {
+           description
+             "This anydata value MUST represent a container with
+              zero or more data nodes representing additional
+              error information.";
+        }
+      }
+    }
+  }
+
+  grouping restconf {
+    description
+      "Conceptual grouping representing the RESTCONF
+       root resource.";
+
+    container restconf {
+      description
+        "Conceptual container representing the RESTCONF
+         root resource.";
+
+      container data {
+        description
+          "Container representing the datastore resource.
+           Represents the conceptual root of all state data
+           and configuration data supported by the server.
+           The child nodes of this container can be any data
+           resources that are defined as top-level data nodes
+           from the YANG modules advertised by the server in
+           the 'ietf-yang-library' module.";
+      }
+
+      container operations {
+        description
+          "Container for all operation resources.
+
+           Each resource is represented as an empty leaf with the
+           name of the RPC operation from the YANG 'rpc' statement.
+
+           For example, the 'system-restart' RPC operation defined
+           in the 'ietf-system' module would be represented as
+           an empty leaf in the 'ietf-system' namespace.  This is
+           a conceptual leaf and will not actually be found in
+           the module:
+
+              module ietf-system {
+                leaf system-reset {
+                  type empty;
+                }
+              }
+
+           To invoke the 'system-restart' RPC operation:
+
+              POST /restconf/operations/ietf-system:system-restart
+
+           To discover the RPC operations supported by the server:
+
+              GET /restconf/operations
+
+           In XML, the YANG module namespace identifies the module:
+
+             <system-restart
+                xmlns='urn:ietf:params:xml:ns:yang:ietf-system'/>
+
+           In JSON, the YANG module name identifies the module:
+
+             { 'ietf-system:system-restart' : [null] }
+          ";
+      }
+      leaf yang-library-version {
+        type string {
+          pattern '\d{4}-\d{2}-\d{2}';
+        }
+        config false;
+        mandatory true;
+        description
+          "Identifies the revision date of the 'ietf-yang-library'
+           module that is implemented by this RESTCONF server.
+           Indicates the year, month, and day in YYYY-MM-DD
+           numeric format.";
+      }
+    }
+  }
+
+}
diff --git a/tests/modules/yang/notifications@2008-07-14.yang b/tests/modules/yang/notifications@2008-07-14.yang
new file mode 100644
index 0000000..b696f39
--- /dev/null
+++ b/tests/modules/yang/notifications@2008-07-14.yang
@@ -0,0 +1,95 @@
+module notifications {
+
+    namespace "urn:ietf:params:xml:ns:netconf:notification:1.0";
+    prefix "ncEvent";
+
+    import ietf-yang-types { prefix yang; }
+
+    organization
+      "IETF NETCONF WG";
+
+    contact
+      "netconf@ops.ietf.org";
+
+    description
+      "Conversion of the 'ncEvent' XSD in the
+       NETCONF Notifications RFC.";
+
+    reference
+      "RFC 5277.";
+
+    revision 2008-07-14 {
+      description "RFC 5277 version.";
+    }
+
+    typedef streamNameType {
+      description
+        "The name of an event stream.";
+      type string;
+    }
+
+    rpc create-subscription {
+      description
+        "The command to create a notification subscription. It
+         takes as argument the name of the notification stream
+         and filter. Both of those options limit the content of
+         the subscription. In addition, there are two time-related
+         parameters, startTime and stopTime, which can be used to
+         select the time interval of interest to the notification
+         replay feature.";
+
+      input {
+        leaf stream {
+          description
+            "An optional parameter that indicates which stream of events
+             is of interest. If not present, then events in the default
+             NETCONF stream will be sent.";
+          type streamNameType;
+          default "NETCONF";
+        }
+
+        anyxml filter {
+          description
+            "An optional parameter that indicates which subset of all
+             possible events is of interest. The format of this
+             parameter is the same as that of the filter parameter
+             in the NETCONF protocol operations. If not present,
+             all events not precluded by other parameters will
+             be sent.";
+        }
+
+        leaf startTime {
+          description
+            "A parameter used to trigger the replay feature and
+             indicates that the replay should start at the time
+             specified. If start time is not present, this is not a
+             replay subscription.";
+          type yang:date-and-time;
+        }
+
+        leaf stopTime {
+          // must ". >= ../startTime";
+          description
+            "An optional parameter used with the optional replay
+             feature to indicate the newest notifications of
+             interest. If stop time is not present, the notifications
+             will continue until the subscription is terminated.
+             Must be used with startTime.";
+          type yang:date-and-time;
+        }
+      }
+    }
+
+   /*container notification {
+      description "internal struct to start a notification";
+      config false;
+
+      leaf eventTime {
+         mandatory true;
+         type yang:date-and-time;
+      }
+
+      // eventType and any data content goes here
+   }*/
+}
+
diff --git a/tests/modules/yang/sm-extension.yang b/tests/modules/yang/sm-extension.yang
new file mode 100644
index 0000000..63d164a
--- /dev/null
+++ b/tests/modules/yang/sm-extension.yang
@@ -0,0 +1,17 @@
+module sm-extension {
+  yang-version 1.1;
+  namespace "urn:sm-ext";
+  prefix "sm-ext";
+
+  list tlist {
+    key "name";
+    leaf name {
+      type uint32;
+    }
+  }
+  container tcont {
+    leaf tleaf {
+      type uint32;
+    }
+  }
+}
diff --git a/tests/modules/yang/sm-mod.yang b/tests/modules/yang/sm-mod.yang
new file mode 100644
index 0000000..8ac834e
--- /dev/null
+++ b/tests/modules/yang/sm-mod.yang
@@ -0,0 +1,9 @@
+module sm-mod {
+  yang-version 1.1;
+  namespace "urn:sm-mod";
+  prefix "sm-mod";
+
+  import sm-modp {
+    prefix smp;
+  }
+}
diff --git a/tests/modules/yang/sm-modp.yang b/tests/modules/yang/sm-modp.yang
new file mode 100644
index 0000000..33f45b4
--- /dev/null
+++ b/tests/modules/yang/sm-modp.yang
@@ -0,0 +1,24 @@
+module sm-modp {
+  yang-version 1.1;
+  namespace "urn:sm-modp";
+  prefix "sm-modp";
+
+  import ietf-yang-schema-mount {
+    prefix yangmnt;
+  }
+
+  revision 2017-01-26;
+
+  container ncmp {
+    yangmnt:mount-point "root";
+  }
+
+  container not-compiled {
+    leaf first {
+      type string;
+    }
+    leaf second {
+      type string;
+    }
+  }
+}
diff --git a/tests/modules/yang/sm-rpcnotif.yang b/tests/modules/yang/sm-rpcnotif.yang
new file mode 100644
index 0000000..fda5442
--- /dev/null
+++ b/tests/modules/yang/sm-rpcnotif.yang
@@ -0,0 +1,25 @@
+module sm-rpcnotif {
+  yang-version 1.1;
+  namespace "urn:rpcnotif";
+  prefix "smrn";
+
+  container cont {
+    notification cn;
+    action cr {
+      input {
+        leaf in {
+          type string;
+        }
+      }
+      output {
+        leaf out {
+          type string;
+        }
+      }
+    }
+  }
+  rpc r1;
+  rpc r2;
+  notification n1;
+  notification n2;
+}
diff --git a/tests/modules/yang/sm.yang b/tests/modules/yang/sm.yang
new file mode 100644
index 0000000..3da9c9a
--- /dev/null
+++ b/tests/modules/yang/sm.yang
@@ -0,0 +1,39 @@
+module sm {
+    yang-version 1.1;
+    namespace "urn:sm";
+    prefix "sm";
+
+    import ietf-yang-schema-mount {
+        prefix yangmnt;
+    }
+    import ietf-interfaces {
+        prefix if;
+    }
+
+    container root {
+        yangmnt:mount-point "root";
+    }
+    container root2 {
+        yangmnt:mount-point "root";
+    }
+    container root3 {
+        list ls {
+            key name;
+            leaf name {
+                type string;
+            }
+            yangmnt:mount-point "mnt-root";
+        }
+    }
+    leaf target {
+        type string;
+    }
+
+    augment /if:interfaces/if:interface {
+        leaf sm-name {
+            type leafref {
+                path "/sm:target";
+            }
+        }
+    }
+}