Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 1342 insertions, 0 deletions

diff --git a/Documentation/admin-guide/perf/alibaba_pmu.rst b/Documentation/admin-guide/perf/alibaba_pmu.rst
new file mode 100644
index 000000000..7d8400239
--- /dev/null
+++ b/Documentation/admin-guide/perf/alibaba_pmu.rst
@@ -0,0 +1,105 @@
+=============================================================
+Alibaba's T-Head SoC Uncore Performance Monitoring Unit (PMU)
+=============================================================
+
+The Yitian 710, custom-built by Alibaba Group's chip development business,
+T-Head, implements uncore PMU for performance and functional debugging to
+facilitate system maintenance.
+
+DDR Sub-System Driveway (DRW) PMU Driver
+=========================================
+
+Yitian 710 employs eight DDR5/4 channels, four on each die. Each DDR5 channel
+is independent of others to service system memory requests. And one DDR5
+channel is split into two independent sub-channels. The DDR Sub-System Driveway
+implements separate PMUs for each sub-channel to monitor various performance
+metrics.
+
+The Driveway PMU devices are named as ali_drw_<sys_base_addr> with perf.
+For example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two
+sub-channels of the same channel in die 0. And the PMU device of die 1 is
+prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000.
+
+Each sub-channel has 36 PMU counters in total, which is classified into
+four groups:
+
+- Group 0: PMU Cycle Counter. This group has one pair of counters
+  pmu_cycle_cnt_low and pmu_cycle_cnt_high, that is used as the cycle count
+  based on DDRC core clock.
+
+- Group 1: PMU Bandwidth Counters. This group has 8 counters that are used
+  to count the total access number of either the eight bank groups in a
+  selected rank, or four ranks separately in the first 4 counters. The base
+  transfer unit is 64B.
+
+- Group 2: PMU Retry Counters. This group has 10 counters, that intend to
+  count the total retry number of each type of uncorrectable error.
+
+- Group 3: PMU Common Counters. This group has 16 counters, that are used
+  to count the common events.
+
+For now, the Driveway PMU driver only uses counters in group 0 and group 3.
+
+The DDR Controller (DDRCTL) and DDR PHY combine to create a complete solution
+for connecting an SoC application bus to DDR memory devices. The DDRCTL
+receives transactions Host Interface (HIF) which is custom-defined by Synopsys.
+These transactions are queued internally and scheduled for access while
+satisfying the SDRAM protocol timing requirements, transaction priorities, and
+dependencies between the transactions. The DDRCTL in turn issues commands on
+the DDR PHY Interface (DFI) to the PHY module, which launches and captures data
+to and from the SDRAM. The driveway PMUs have hardware logic to gather
+statistics and performance logging signals on HIF, DFI, etc.
+
+By counting the READ, WRITE and RMW commands sent to the DDRC through the HIF
+interface, we could calculate the bandwidth. Example usage of counting memory
+data bandwidth::
+
+  perf stat \
+    -e ali_drw_21000/hif_wr/ \
+    -e ali_drw_21000/hif_rd/ \
+    -e ali_drw_21000/hif_rmw/ \
+    -e ali_drw_21000/cycle/ \
+    -e ali_drw_21080/hif_wr/ \
+    -e ali_drw_21080/hif_rd/ \
+    -e ali_drw_21080/hif_rmw/ \
+    -e ali_drw_21080/cycle/ \
+    -e ali_drw_23000/hif_wr/ \
+    -e ali_drw_23000/hif_rd/ \
+    -e ali_drw_23000/hif_rmw/ \
+    -e ali_drw_23000/cycle/ \
+    -e ali_drw_23080/hif_wr/ \
+    -e ali_drw_23080/hif_rd/ \
+    -e ali_drw_23080/hif_rmw/ \
+    -e ali_drw_23080/cycle/ \
+    -e ali_drw_25000/hif_wr/ \
+    -e ali_drw_25000/hif_rd/ \
+    -e ali_drw_25000/hif_rmw/ \
+    -e ali_drw_25000/cycle/ \
+    -e ali_drw_25080/hif_wr/ \
+    -e ali_drw_25080/hif_rd/ \
+    -e ali_drw_25080/hif_rmw/ \
+    -e ali_drw_25080/cycle/ \
+    -e ali_drw_27000/hif_wr/ \
+    -e ali_drw_27000/hif_rd/ \
+    -e ali_drw_27000/hif_rmw/ \
+    -e ali_drw_27000/cycle/ \
+    -e ali_drw_27080/hif_wr/ \
+    -e ali_drw_27080/hif_rd/ \
+    -e ali_drw_27080/hif_rmw/ \
+    -e ali_drw_27080/cycle/ -- sleep 10
+
+Example usage of counting all memory read/write bandwidth by metric::
+
+  perf stat -M ddr_read_bandwidth.all -- sleep 10
+  perf stat -M ddr_write_bandwidth.all -- sleep 10
+
+The average DRAM bandwidth can be calculated as follows:
+
+- Read Bandwidth =  perf_hif_rd * DDRC_WIDTH * DDRC_Freq / DDRC_Cycle
+- Write Bandwidth = (perf_hif_wr + perf_hif_rmw) * DDRC_WIDTH * DDRC_Freq / DDRC_Cycle
+
+Here, DDRC_WIDTH = 64 bytes.
+
+The current driver does not support sampling. So "perf record" is
+unsupported.  Also attach to a task is unsupported as the events are all
+uncore.
diff --git a/Documentation/admin-guide/perf/arm-ccn.rst b/Documentation/admin-guide/perf/arm-ccn.rst
new file mode 100644
index 000000000..f62f7fe50
--- /dev/null
+++ b/Documentation/admin-guide/perf/arm-ccn.rst
@@ -0,0 +1,61 @@
+==========================
+ARM Cache Coherent Network
+==========================
+
+CCN-504 is a ring-bus interconnect consisting of 11 crosspoints
+(XPs), with each crosspoint supporting up to two device ports,
+so nodes (devices) 0 and 1 are connected to crosspoint 0,
+nodes 2 and 3 to crosspoint 1 etc.
+
+PMU (perf) driver
+-----------------
+
+The CCN driver registers a perf PMU driver, which provides
+description of available events and configuration options
+in sysfs, see /sys/bus/event_source/devices/ccn*.
+
+The "format" directory describes format of the config, config1
+and config2 fields of the perf_event_attr structure. The "events"
+directory provides configuration templates for all documented
+events, that can be used with perf tool. For example "xp_valid_flit"
+is an equivalent of "type=0x8,event=0x4". Other parameters must be
+explicitly specified.
+
+For events originating from device, "node" defines its index.
+
+Crosspoint PMU events require "xp" (index), "bus" (bus number)
+and "vc" (virtual channel ID).
+
+Crosspoint watchpoint-based events (special "event" value 0xfe)
+require "xp" and "vc" as above plus "port" (device port index),
+"dir" (transmit/receive direction), comparator values ("cmp_l"
+and "cmp_h") and "mask", being index of the comparator mask.
+
+Masks are defined separately from the event description
+(due to limited number of the config values) in the "cmp_mask"
+directory, with first 8 configurable by user and additional
+4 hardcoded for the most frequent use cases.
+
+Cycle counter is described by a "type" value 0xff and does
+not require any other settings.
+
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
+Example of perf tool use::
+
+  / # perf list | grep ccn
+    ccn/cycles/                                        [Kernel PMU event]
+  <...>
+    ccn/xp_valid_flit,xp=?,port=?,vc=?,dir=?/          [Kernel PMU event]
+  <...>
+
+  / # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+                                                                         sleep 1
+
+The driver does not support sampling, therefore "perf record" will
+not work. Per-task (without "-a") perf sessions are not supported.
diff --git a/Documentation/admin-guide/perf/arm-cmn.rst b/Documentation/admin-guide/perf/arm-cmn.rst
new file mode 100644
index 000000000..796e25b70
--- /dev/null
+++ b/Documentation/admin-guide/perf/arm-cmn.rst
@@ -0,0 +1,65 @@
+=============================
+Arm Coherent Mesh Network PMU
+=============================
+
+CMN-600 is a configurable mesh interconnect consisting of a rectangular
+grid of crosspoints (XPs), with each crosspoint supporting up to two
+device ports to which various AMBA CHI agents are attached.
+
+CMN implements a distributed PMU design as part of its debug and trace
+functionality. This consists of a local monitor (DTM) at every XP, which
+counts up to 4 event signals from the connected device nodes and/or the
+XP itself. Overflow from these local counters is accumulated in up to 8
+global counters implemented by the main controller (DTC), which provides
+overall PMU control and interrupts for global counter overflow.
+
+PMU events
+----------
+
+The PMU driver registers a single PMU device for the whole interconnect,
+see /sys/bus/event_source/devices/arm_cmn_0. Multi-chip systems may link
+more than one CMN together via external CCIX links - in this situation,
+each mesh counts its own events entirely independently, and additional
+PMU devices will be named arm_cmn_{1..n}.
+
+Most events are specified in a format based directly on the TRM
+definitions - "type" selects the respective node type, and "eventid" the
+event number. Some events require an additional occupancy ID, which is
+specified by "occupid".
+
+* Since RN-D nodes do not have any distinct events from RN-I nodes, they
+  are treated as the same type (0xa), and the common event templates are
+  named "rnid_*".
+
+* The cycle counter is treated as a synthetic event belonging to the DTC
+  node ("type" == 0x3, "eventid" is ignored).
+
+* XP events also encode the port and channel in the "eventid" field, to
+  match the underlying pmu_event0_id encoding for the pmu_event_sel
+  register. The event templates are named with prefixes to cover all
+  permutations.
+
+By default each event provides an aggregate count over all nodes of the
+given type. To target a specific node, "bynodeid" must be set to 1 and
+"nodeid" to the appropriate value derived from the CMN configuration
+(as defined in the "Node ID Mapping" section of the TRM).
+
+Watchpoints
+-----------
+
+The PMU can also count watchpoint events to monitor specific flit
+traffic. Watchpoints are treated as a synthetic event type, and like PMU
+events can be global or targeted with a particular XP's "nodeid" value.
+Since the watchpoint direction is otherwise implicit in the underlying
+register selection, separate events are provided for flit uploads and
+downloads.
+
+The flit match value and mask are passed in config1 and config2 ("val"
+and "mask" respectively). "wp_dev_sel", "wp_chn_sel", "wp_grp" and
+"wp_exclusive" are specified per the TRM definitions for dtm_wp_config0.
+Where a watchpoint needs to match fields from both match groups on the
+REQ or SNP channel, it can be specified as two events - one for each
+group - with the same nonzero "combine" value. The count for such a
+pair of combined events will be attributed to the primary match.
+Watchpoint events with a "combine" value of 0 are considered independent
+and will count individually.
diff --git a/Documentation/admin-guide/perf/arm_dsu_pmu.rst b/Documentation/admin-guide/perf/arm_dsu_pmu.rst
new file mode 100644
index 000000000..7fd34db75
--- /dev/null
+++ b/Documentation/admin-guide/perf/arm_dsu_pmu.rst
@@ -0,0 +1,29 @@
+==================================
+ARM DynamIQ Shared Unit (DSU) PMU
+==================================
+
+ARM DynamIQ Shared Unit integrates one or more cores with an L3 memory system,
+control logic and external interfaces to form a multicore cluster. The PMU
+allows counting the various events related to the L3 cache, Snoop Control Unit
+etc, using 32bit independent counters. It also provides a 64bit cycle counter.
+
+The PMU can only be accessed via CPU system registers and are common to the
+cores connected to the same DSU. Like most of the other uncore PMUs, DSU
+PMU doesn't support process specific events and cannot be used in sampling mode.
+
+The DSU provides a bitmap for a subset of implemented events via hardware
+registers. There is no way for the driver to determine if the other events
+are available or not. Hence the driver exposes only those events advertised
+by the DSU, in "events" directory under::
+
+  /sys/bus/event_sources/devices/arm_dsu_<N>/
+
+The user should refer to the TRM of the product to figure out the supported events
+and use the raw event code for the unlisted events.
+
+The driver also exposes the CPUs connected to the DSU instance in "associated_cpus".
+
+
+e.g usage::
+
+	perf stat -a -e arm_dsu_0/cycles/
diff --git a/Documentation/admin-guide/perf/cxl.rst b/Documentation/admin-guide/perf/cxl.rst
new file mode 100644
index 000000000..9233ea0d0
--- /dev/null
+++ b/Documentation/admin-guide/perf/cxl.rst
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+CXL Performance Monitoring Unit (CPMU)
+======================================
+
+The CXL rev 3.0 specification provides a definition of CXL Performance
+Monitoring Unit in section 13.2: Performance Monitoring.
+
+CXL components (e.g. Root Port, Switch Upstream Port, End Point) may have
+any number of CPMU instances. CPMU capabilities are fully discoverable from
+the devices. The specification provides event definitions for all CXL protocol
+message types and a set of additional events for things commonly counted on
+CXL devices (e.g. DRAM events).
+
+CPMU driver
+===========
+
+The CPMU driver registers a perf PMU with the name pmu_mem<X>.<Y> on the CXL bus
+representing the Yth CPMU for memX.
+
+    /sys/bus/cxl/device/pmu_mem<X>.<Y>
+
+The associated PMU is registered as
+
+   /sys/bus/event_sources/devices/cxl_pmu_mem<X>.<Y>
+
+In common with other CXL bus devices, the id has no specific meaning and the
+relationship to specific CXL device should be established via the device parent
+of the device on the CXL bus.
+
+PMU driver provides description of available events and filter options in sysfs.
+
+The "format" directory describes all formats of the config (event vendor id,
+group id and mask) config1 (threshold, filter enables) and config2 (filter
+parameters) fields of the perf_event_attr structure.  The "events" directory
+describes all documented events show in perf list.
+
+The events shown in perf list are the most fine grained events with a single
+bit of the event mask set. More general events may be enable by setting
+multiple mask bits in config. For example, all Device to Host Read Requests
+may be captured on a single counter by setting the bits for all of
+
+* d2h_req_rdcurr
+* d2h_req_rdown
+* d2h_req_rdshared
+* d2h_req_rdany
+* d2h_req_rdownnodata
+
+Example of usage::
+
+  $#perf list
+  cxl_pmu_mem0.0/clock_ticks/                        [Kernel PMU event]
+  cxl_pmu_mem0.0/d2h_req_rdshared/                   [Kernel PMU event]
+  cxl_pmu_mem0.0/h2d_req_snpcur/                     [Kernel PMU event]
+  cxl_pmu_mem0.0/h2d_req_snpdata/                    [Kernel PMU event]
+  cxl_pmu_mem0.0/h2d_req_snpinv/                     [Kernel PMU event]
+  -----------------------------------------------------------
+
+  $# perf stat -a -e cxl_pmu_mem0.0/clock_ticks/ -e cxl_pmu_mem0.0/d2h_req_rdshared/
+
+Vendor specific events may also be available and if so can be used via
+
+  $# perf stat -a -e cxl_pmu_mem0.0/vid=VID,gid=GID,mask=MASK/
+
+The driver does not support sampling so "perf record" is unsupported.
+It only supports system-wide counting so attaching to a task is
+unsupported.
diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
new file mode 100644
index 000000000..7e863662e
--- /dev/null
+++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -0,0 +1,130 @@
+================================================
+HiSilicon PCIe Performance Monitoring Unit (PMU)
+================================================
+
+On Hip09, HiSilicon PCIe Performance Monitoring Unit (PMU) could monitor
+bandwidth, latency, bus utilization and buffer occupancy data of PCIe.
+
+Each PCIe Core has a PMU to monitor multi Root Ports of this PCIe Core and
+all Endpoints downstream these Root Ports.
+
+
+HiSilicon PCIe PMU driver
+=========================
+
+The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe
+Core id.::
+
+  /sys/bus/event_source/hisi_pcie<sicl>_core<core>
+
+PMU driver provides description of available events and filter options in sysfs,
+see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>.
+
+The "format" directory describes all formats of the config (events) and config1
+(filter options) fields of the perf_event_attr structure. The "events" directory
+describes all documented events shown in perf list.
+
+The "identifier" sysfs file allows users to identify the version of the
+PMU hardware device.
+
+The "bus" sysfs file allows users to get the bus number of Root Ports
+monitored by PMU.
+
+Example usage of perf::
+
+  $# perf list
+  hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
+
+The current driver does not support sampling. So "perf record" is unsupported.
+Also attach to a task is unsupported for PCIe PMU.
+
+Filter options
+--------------
+
+1. Target filter
+
+   PMU could only monitor the performance of traffic downstream target Root
+   Ports or downstream target Endpoint. PCIe PMU driver support "port" and
+   "bdf" interfaces for users, and these two interfaces aren't supported at the
+   same time.
+
+   - port
+
+     "port" filter can be used in all PCIe PMU events, target Root Port can be
+     selected by configuring the 16-bits-bitmap "port". Multi ports can be
+     selected for AP-layer-events, and only one port can be selected for
+     TL/DL-layer-events.
+
+     For example, if target Root Port is 0000:00:00.0 (x8 lanes), bit0 of
+     bitmap should be set, port=0x1; if target Root Port is 0000:00:04.0 (x4
+     lanes), bit8 is set, port=0x100; if these two Root Ports are both
+     monitored, port=0x101.
+
+     Example usage of perf::
+
+       $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
+
+   - bdf
+
+     "bdf" filter can only be used in bandwidth events, target Endpoint is
+     selected by configuring BDF to "bdf". Counter only counts the bandwidth of
+     message requested by target Endpoint.
+
+     For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
+
+     Example usage of perf::
+
+       $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
+
+2. Trigger filter
+
+   Event statistics start when the first time TLP length is greater/smaller
+   than trigger condition. You can set the trigger condition by writing
+   "trig_len", and set the trigger mode by writing "trig_mode". This filter can
+   only be used in bandwidth events.
+
+   For example, "trig_len=4" means trigger condition is 2^4 DW, "trig_mode=0"
+   means statistics start when TLP length > trigger condition, "trig_mode=1"
+   means start when TLP length < condition.
+
+   Example usage of perf::
+
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+
+3. Threshold filter
+
+   Counter counts when TLP length within the specified range. You can set the
+   threshold by writing "thr_len", and set the threshold mode by writing
+   "thr_mode". This filter can only be used in bandwidth events.
+
+   For example, "thr_len=4" means threshold is 2^4 DW, "thr_mode=0" means
+   counter counts when TLP length >= threshold, and "thr_mode=1" means counts
+   when TLP length < threshold.
+
+   Example usage of perf::
+
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+
+4. TLP Length filter
+
+   When counting bandwidth, the data can be composed of certain parts of TLP
+   packets. You can specify it through "len_mode":
+
+   - 2'b00: Reserved (Do not use this since the behaviour is undefined)
+   - 2'b01: Bandwidth of TLP payloads
+   - 2'b10: Bandwidth of TLP headers
+   - 2'b11: Bandwidth of both TLP payloads and headers
+
+   For example, "len_mode=2" means only counting the bandwidth of TLP headers
+   and "len_mode=3" means the final bandwidth data is composed of both TLP
+   headers and payloads. Default value if not specified is 2'b11.
+
+   Example usage of perf::
+
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst
new file mode 100644
index 000000000..e0174d208
--- /dev/null
+++ b/Documentation/admin-guide/perf/hisi-pmu.rst
@@ -0,0 +1,126 @@
+======================================================
+HiSilicon SoC uncore Performance Monitoring Unit (PMU)
+======================================================
+
+The HiSilicon SoC chip includes various independent system device PMUs
+such as L3 cache (L3C), Hydra Home Agent (HHA) and DDRC. These PMUs are
+independent and have hardware logic to gather statistics and performance
+information.
+
+The HiSilicon SoC encapsulates multiple CPU and IO dies. Each CPU cluster
+(CCL) is made up of 4 cpu cores sharing one L3 cache; each CPU die is
+called Super CPU cluster (SCCL) and is made up of 6 CCLs. Each SCCL has
+two HHAs (0 - 1) and four DDRCs (0 - 3), respectively.
+
+HiSilicon SoC uncore PMU driver
+-------------------------------
+
+Each device PMU has separate registers for event counting, control and
+interrupt, and the PMU driver shall register perf PMU drivers like L3C,
+HHA and DDRC etc. The available events and configuration options shall
+be described in the sysfs, see:
+
+/sys/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>/, or
+/sys/bus/event_source/devices/hisi_sccl{X}_<l3c{Y}/hha{Y}/ddrc{Y}>.
+The "perf list" command shall list the available events from sysfs.
+
+Each L3C, HHA and DDRC is registered as a separate PMU with perf. The PMU
+name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>.
+where "sccl-id" is the identifier of the SCCL and "index-id" is the index of
+module.
+
+e.g. hisi_sccl3_l3c0/rd_hit_cpipe is READ_HIT_CPIPE event of L3C index #0 in
+SCCL ID #3.
+
+e.g. hisi_sccl1_hha0/rx_operations is RX_OPERATIONS event of HHA index #0 in
+SCCL ID #1.
+
+The driver also provides a "cpumask" sysfs attribute, which shows the CPU core
+ID used to count the uncore PMU event.
+
+Example usage of perf::
+
+  $# perf list
+  hisi_sccl3_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl3_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/rd_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+  hisi_sccl1_l3c0/wr_hit_cpipe/ [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
+
+For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same
+as PMU v1, but some new functions are added to the hardware.
+
+1. L3C PMU supports filtering by core/thread within the cluster which can be
+specified as a bitmap::
+
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5
+
+This will only count the operations from core/thread 0 and 1 in this cluster.
+
+2. Tracetag allow the user to chose to count only read, write or atomic
+operations via the tt_req parameeter in perf. The default value counts all
+operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101
+represents write operations, 3'b110 represents atomic store operations and
+3'b111 represents atomic non-store operations, other values are reserved::
+
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5
+
+This will only count the read operations in this cluster.
+
+3. Datasrc allows the user to check where the data comes from. It is 5 bits.
+Some important codes are as follows:
+
+- 5'b00001: comes from L3C in this die;
+- 5'b01000: comes from L3C in the cross-die;
+- 5'b01001: comes from L3C which is in another socket;
+- 5'b01110: comes from the local DDR;
+- 5'b01111: comes from the cross-die DDR;
+- 5'b10000: comes from cross-socket DDR;
+
+etc, it is mainly helpful to find that the data source is nearest from the CPU
+cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be
+configured in perf command::
+
+  $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/,
+  hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5
+
+4. Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die
+contains several Compute Clusters (CCLs). The I/O dies are called Super I/O
+clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the
+SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit
+CCL/ICL-ID. For I/O die, the ICL-ID is followed by:
+
+- 5'b00000: I/O_MGMT_ICL;
+- 5'b00001: Network_ICL;
+- 5'b00011: HAC_ICL;
+- 5'b10000: PCIe_ICL;
+
+5. uring_channel: UC PMU events 0x47~0x59 supports filtering by tx request
+uring channel. It is 2 bits. Some important codes are as follows:
+
+- 2'b11: count the events which sent to the uring_ext (MATA) channel;
+- 2'b01: is the same as 2'b11;
+- 2'b10: count the events which sent to the uring (non-MATA) channel;
+- 2'b00: default value, count the events which sent to the both uring and
+  uring_ext channel;
+
+Users could configure IDs to count data come from specific CCL/ICL, by setting
+srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting
+tgtid_cmd & tgtid_msk. A set bit in srcid_msk/tgtid_msk means the PMU will not
+check the bit when matching against the srcid_cmd/tgtid_cmd.
+
+If all of these options are disabled, it can works by the default value that
+doesn't distinguish the filter condition and ID information and will return
+the total counter values in the PMU counters.
+
+The current driver does not support sampling. So "perf record" is unsupported.
+Also attach to a task is unsupported as the events are all uncore.
+
+Note: Please contact the maintainer for a complete list of events supported for
+the PMU devices in the SoC and its information if needed.
diff --git a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst
new file mode 100644
index 000000000..75a40846d
--- /dev/null
+++ b/Documentation/admin-guide/perf/hns3-pmu.rst
@@ -0,0 +1,136 @@
+======================================
+HNS3 Performance Monitoring Unit (PMU)
+======================================
+
+HNS3(HiSilicon network system 3) Performance Monitoring Unit (PMU) is an
+End Point device to collect performance statistics of HiSilicon SoC NIC.
+On Hip09, each SICL(Super I/O cluster) has one PMU device.
+
+HNS3 PMU supports collection of performance statistics such as bandwidth,
+latency, packet rate and interrupt rate.
+
+Each HNS3 PMU supports 8 hardware events.
+
+HNS3 PMU driver
+===============
+
+The HNS3 PMU driver registers a perf PMU with the name of its sicl id.::
+
+  /sys/devices/hns3_pmu_sicl_<sicl_id>
+
+PMU driver provides description of available events, filter modes, format,
+identifier and cpumask in sysfs.
+
+The "events" directory describes the event code of all supported events
+shown in perf list.
+
+The "filtermode" directory describes the supported filter modes of each
+event.
+
+The "format" directory describes all formats of the config (events) and
+config1 (filter options) fields of the perf_event_attr structure.
+
+The "identifier" file shows version of PMU hardware device.
+
+The "bdf_min" and "bdf_max" files show the supported bdf range of each
+pmu device.
+
+The "hw_clk_freq" file shows the hardware clock frequency of each pmu
+device.
+
+Example usage of checking event code and subevent code::
+
+  $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time
+  config=0x00204
+  $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num
+  config=0x10204
+
+Each performance statistic has a pair of events to get two values to
+calculate real performance data in userspace.
+
+The bits 0~15 of config (here 0x0204) are the true hardware event code. If
+two events have same value of bits 0~15 of config, that means they are
+event pair. And the bit 16 of config indicates getting counter 0 or
+counter 1 of hardware event.
+
+After getting two values of event pair in userspace, the formula of
+computation to calculate real performance data is:::
+
+  counter 0 / counter 1
+
+Example usage of checking supported filter mode::
+
+  $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num
+  filter mode supported: global/port/port-tc/func/func-queue/
+
+Example usage of perf::
+
+  $# perf list
+  hns3_pmu_sicl_0/bw_ssu_rpu_byte_num/ [kernel PMU event]
+  hns3_pmu_sicl_0/bw_ssu_rpu_time/     [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -g -e hns3_pmu_sicl_0/bw_ssu_rpu_byte_num,global=1/ -e hns3_pmu_sicl_0/bw_ssu_rpu_time,global=1/ -I 1000
+  or
+  $# perf stat -g -e hns3_pmu_sicl_0/config=0x00002,global=1/ -e hns3_pmu_sicl_0/config=0x10002,global=1/ -I 1000
+
+
+Filter modes
+--------------
+
+1. global mode
+PMU collect performance statistics for all HNS3 PCIe functions of IO DIE.
+Set the "global" filter option to 1 will enable this mode.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,global=1/ -I 1000
+
+2. port mode
+PMU collect performance statistic of one whole physical port. The port id
+is same as mac id. The "tc" filter option must be set to 0xF in this mode,
+here tc stands for traffic class.
+
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0xF/ -I 1000
+
+3. port-tc mode
+PMU collect performance statistic of one tc of physical port. The port id
+is same as mac id. The "tc" filter option must be set to 0 ~ 7 in this
+mode.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0/ -I 1000
+
+4. func mode
+PMU collect performance statistic of one PF/VF. The function id is BDF of
+PF/VF, its conversion formula::
+
+  func = (bus << 8) + (device << 3) + (function)
+
+for example:
+  BDF         func
+  35:00.0    0x3500
+  35:00.1    0x3501
+  35:01.0    0x3508
+
+In this mode, the "queue" filter option must be set to 0xFFFF.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0xFFFF/ -I 1000
+
+5. func-queue mode
+PMU collect performance statistic of one queue of PF/VF. The function id
+is BDF of PF/VF, the "queue" filter option must be set to the exact queue
+id of function.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0/ -I 1000
+
+6. func-intr mode
+PMU collect performance statistic of one interrupt of PF/VF. The function
+id is BDF of PF/VF, the "intr" filter option must be set to the exact
+interrupt id of function.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x00301,bdf=0x3500,intr=0/ -I 1000
diff --git a/Documentation/admin-guide/perf/imx-ddr.rst b/Documentation/admin-guide/perf/imx-ddr.rst
new file mode 100644
index 000000000..90926d0fb
--- /dev/null
+++ b/Documentation/admin-guide/perf/imx-ddr.rst
@@ -0,0 +1,71 @@
+=====================================================
+Freescale i.MX8 DDR Performance Monitoring Unit (PMU)
+=====================================================
+
+There are no performance counters inside the DRAM controller, so performance
+signals are brought out to the edge of the controller where a set of 4 x 32 bit
+counters is implemented. This is controlled by the CSV modes programmed in counter
+control register which causes a large number of PERF signals to be generated.
+
+Selection of the value for each counter is done via the config registers. There
+is one register for each counter. Counter 0 is special in that it always counts
+“time” and when expired causes a lock on itself and the other counters and an
+interrupt is raised. If any other counter overflows, it continues counting, and
+no interrupt is raised.
+
+The "format" directory describes format of the config (event ID) and config1
+(AXI filtering) fields of the perf_event_attr structure, see /sys/bus/event_source/
+devices/imx8_ddr0/format/. The "events" directory describes the events types
+hardware supported that can be used with perf tool, see /sys/bus/event_source/
+devices/imx8_ddr0/events/. The "caps" directory describes filter features implemented
+in DDR PMU, see /sys/bus/events_source/devices/imx8_ddr0/caps/.
+
+    .. code-block:: bash
+
+        perf stat -a -e imx8_ddr0/cycles/ cmd
+        perf stat -a -e imx8_ddr0/read/,imx8_ddr0/write/ cmd
+
+AXI filtering is only used by CSV modes 0x41 (axid-read) and 0x42 (axid-write)
+to count reading or writing matches filter setting. Filter setting is various
+from different DRAM controller implementations, which is distinguished by quirks
+in the driver. You also can dump info from userspace, filter in "caps" directory
+indicates whether PMU supports AXI ID filter or not; enhanced_filter indicates
+whether PMU supports enhanced AXI ID filter or not. Value 0 for un-supported, and
+value 1 for supported.
+
+* With DDR_CAP_AXI_ID_FILTER quirk(filter: 1, enhanced_filter: 0).
+  Filter is defined with two configuration parts:
+  --AXI_ID defines AxID matching value.
+  --AXI_MASKING defines which bits of AxID are meaningful for the matching.
+
+      - 0: corresponding bit is masked.
+      - 1: corresponding bit is not masked, i.e. used to do the matching.
+
+  AXI_ID and AXI_MASKING are mapped on DPCR1 register in performance counter.
+  When non-masked bits are matching corresponding AXI_ID bits then counter is
+  incremented. Perf counter is incremented if::
+
+        AxID && AXI_MASKING == AXI_ID && AXI_MASKING
+
+  This filter doesn't support filter different AXI ID for axid-read and axid-write
+  event at the same time as this filter is shared between counters.
+
+  .. code-block:: bash
+
+      perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xMMMM,axi_id=0xDDDD/ cmd
+      perf stat -a -e imx8_ddr0/axid-write,axi_mask=0xMMMM,axi_id=0xDDDD/ cmd
+
+  .. note::
+
+      axi_mask is inverted in userspace(i.e. set bits are bits to mask), and
+      it will be reverted in driver automatically. so that the user can just specify
+      axi_id to monitor a specific id, rather than having to specify axi_mask.
+
+  .. code-block:: bash
+
+        perf stat -a -e imx8_ddr0/axid-read,axi_id=0x12/ cmd, which will monitor ARID=0x12
+
+* With DDR_CAP_AXI_ID_FILTER_ENHANCED quirk(filter: 1, enhanced_filter: 1).
+  This is an extension to the DDR_CAP_AXI_ID_FILTER quirk which permits
+  counting the number of bytes (as opposed to the number of bursts) from DDR
+  read and write transactions concurrently with another set of data counters.
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
new file mode 100644
index 000000000..f60be04e4
--- /dev/null
+++ b/Documentation/admin-guide/perf/index.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Performance monitor support
+===========================
+
+.. toctree::
+   :maxdepth: 1
+
+   hisi-pmu
+   hisi-pcie-pmu
+   hns3-pmu
+   imx-ddr
+   qcom_l2_pmu
+   qcom_l3_pmu
+   arm-ccn
+   arm-cmn
+   xgene-pmu
+   arm_dsu_pmu
+   thunderx2-pmu
+   alibaba_pmu
+   nvidia-pmu
+   meson-ddr-pmu
+   cxl
diff --git a/Documentation/admin-guide/perf/meson-ddr-pmu.rst b/Documentation/admin-guide/perf/meson-ddr-pmu.rst
new file mode 100644
index 000000000..8e71be1d6
--- /dev/null
+++ b/Documentation/admin-guide/perf/meson-ddr-pmu.rst
@@ -0,0 +1,70 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================
+Amlogic SoC DDR Bandwidth Performance Monitoring Unit (PMU)
+===========================================================
+
+The Amlogic Meson G12 SoC contains a bandwidth monitor inside DRAM controller.
+The monitor includes 4 channels. Each channel can count the request accessing
+DRAM. The channel can count up to 3 AXI port simultaneously. It can be helpful
+to show if the performance bottleneck is on DDR bandwidth.
+
+Currently, this driver supports the following 5 perf events:
+
++ meson_ddr_bw/total_rw_bytes/
++ meson_ddr_bw/chan_1_rw_bytes/
++ meson_ddr_bw/chan_2_rw_bytes/
++ meson_ddr_bw/chan_3_rw_bytes/
++ meson_ddr_bw/chan_4_rw_bytes/
+
+meson_ddr_bw/chan_{1,2,3,4}_rw_bytes/ events are channel-specific events.
+Each channel support filtering, which can let the channel to monitor
+individual IP module in SoC.
+
+Below are DDR access request event filter keywords:
+
++ arm             - from CPU
++ vpu_read1       - from OSD + VPP read
++ gpu             - from 3D GPU
++ pcie            - from PCIe controller
++ hdcp            - from HDCP controller
++ hevc_front      - from HEVC codec front end
++ usb3_0          - from USB3.0 controller
++ hevc_back       - from HEVC codec back end
++ h265enc         - from HEVC encoder
++ vpu_read2       - from DI read
++ vpu_write1      - from VDIN write
++ vpu_write2      - from di write
++ vdec            - from legacy codec video decoder
++ hcodec          - from H264 encoder
++ ge2d            - from ge2d
++ spicc1          - from SPI controller 1
++ usb0            - from USB2.0 controller 0
++ dma             - from system DMA controller 1
++ arb0            - from arb0
++ sd_emmc_b       - from SD eMMC b controller
++ usb1            - from USB2.0 controller 1
++ audio           - from Audio module
++ sd_emmc_c       - from SD eMMC c controller
++ spicc2          - from SPI controller 2
++ ethernet        - from Ethernet controller
+
+
+Examples:
+
+  + Show the total DDR bandwidth per seconds:
+
+    .. code-block:: bash
+
+       perf stat -a -e meson_ddr_bw/total_rw_bytes/ -I 1000 sleep 10
+
+
+  + Show individual DDR bandwidth from CPU and GPU respectively, as well as
+    sum of them:
+
+    .. code-block:: bash
+
+       perf stat -a -e meson_ddr_bw/chan_1_rw_bytes,arm=1/ -I 1000 sleep 10
+       perf stat -a -e meson_ddr_bw/chan_2_rw_bytes,gpu=1/ -I 1000 sleep 10
+       perf stat -a -e meson_ddr_bw/chan_3_rw_bytes,arm=1,gpu=1/ -I 1000 sleep 10
+
diff --git a/Documentation/admin-guide/perf/nvidia-pmu.rst b/Documentation/admin-guide/perf/nvidia-pmu.rst
new file mode 100644
index 000000000..2e0d47cfe
--- /dev/null
+++ b/Documentation/admin-guide/perf/nvidia-pmu.rst
@@ -0,0 +1,299 @@
+=========================================================
+NVIDIA Tegra SoC Uncore Performance Monitoring Unit (PMU)
+=========================================================
+
+The NVIDIA Tegra SoC includes various system PMUs to measure key performance
+metrics like memory bandwidth, latency, and utilization:
+
+* Scalable Coherency Fabric (SCF)
+* NVLink-C2C0
+* NVLink-C2C1
+* CNVLink
+* PCIE
+
+PMU Driver
+----------
+
+The PMUs in this document are based on ARM CoreSight PMU Architecture as
+described in document: ARM IHI 0091. Since this is a standard architecture, the
+PMUs are managed by a common driver "arm-cs-arch-pmu". This driver describes
+the available events and configuration of each PMU in sysfs. Please see the
+sections below to get the sysfs path of each PMU. Like other uncore PMU drivers,
+the driver provides "cpumask" sysfs attribute to show the CPU id used to handle
+the PMU event. There is also "associated_cpus" sysfs attribute, which contains a
+list of CPUs associated with the PMU instance.
+
+.. _SCF_PMU_Section:
+
+SCF PMU
+-------
+
+The SCF PMU monitors system level cache events, CPU traffic, and
+strongly-ordered (SO) PCIE write traffic to local/remote memory. Please see
+:ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section` for more info about the PMU
+traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_scf_pmu_<socket-id>.
+
+Example usage:
+
+* Count event id 0x0 in socket 0::
+
+   perf stat -a -e nvidia_scf_pmu_0/event=0x0/
+
+* Count event id 0x0 in socket 1::
+
+   perf stat -a -e nvidia_scf_pmu_1/event=0x0/
+
+NVLink-C2C0 PMU
+--------------------
+
+The NVLink-C2C0 PMU monitors incoming traffic from a GPU/CPU connected with
+NVLink-C2C (Chip-2-Chip) interconnect. The type of traffic captured by this PMU
+varies dependent on the chip configuration:
+
+* NVIDIA Grace Hopper Superchip: Hopper GPU is connected with Grace SoC.
+
+  In this config, the PMU captures GPU ATS translated or EGM traffic from the GPU.
+
+* NVIDIA Grace CPU Superchip: two Grace CPU SoCs are connected.
+
+  In this config, the PMU captures read and relaxed ordered (RO) writes from
+  PCIE device of the remote SoC.
+
+Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section` for more info about
+the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_nvlink_c2c0_pmu_<socket-id>.
+
+Example usage:
+
+* Count event id 0x0 from the GPU/CPU connected with socket 0::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_0/event=0x0/
+
+* Count event id 0x0 from the GPU/CPU connected with socket 1::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_1/event=0x0/
+
+* Count event id 0x0 from the GPU/CPU connected with socket 2::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_2/event=0x0/
+
+* Count event id 0x0 from the GPU/CPU connected with socket 3::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_3/event=0x0/
+
+NVLink-C2C1 PMU
+-------------------
+
+The NVLink-C2C1 PMU monitors incoming traffic from a GPU connected with
+NVLink-C2C (Chip-2-Chip) interconnect. This PMU captures untranslated GPU
+traffic, in contrast with NvLink-C2C0 PMU that captures ATS translated traffic.
+Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section` for more info about
+the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_nvlink_c2c1_pmu_<socket-id>.
+
+Example usage:
+
+* Count event id 0x0 from the GPU connected with socket 0::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_0/event=0x0/
+
+* Count event id 0x0 from the GPU connected with socket 1::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_1/event=0x0/
+
+* Count event id 0x0 from the GPU connected with socket 2::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_2/event=0x0/
+
+* Count event id 0x0 from the GPU connected with socket 3::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_3/event=0x0/
+
+CNVLink PMU
+---------------
+
+The CNVLink PMU monitors traffic from GPU and PCIE device on remote sockets
+to local memory. For PCIE traffic, this PMU captures read and relaxed ordered
+(RO) write traffic. Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section`
+for more info about the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_cnvlink_pmu_<socket-id>.
+
+Each SoC socket can be connected to one or more sockets via CNVLink. The user can
+use "rem_socket" bitmap parameter to select the remote socket(s) to monitor.
+Each bit represents the socket number, e.g. "rem_socket=0xE" corresponds to
+socket 1 to 3.
+/sys/bus/event_sources/devices/nvidia_cnvlink_pmu_<socket-id>/format/rem_socket
+shows the valid bits that can be set in the "rem_socket" parameter.
+
+The PMU can not distinguish the remote traffic initiator, therefore it does not
+provide filter to select the traffic source to monitor. It reports combined
+traffic from remote GPU and PCIE devices.
+
+Example usage:
+
+* Count event id 0x0 for the traffic from remote socket 1, 2, and 3 to socket 0::
+
+   perf stat -a -e nvidia_cnvlink_pmu_0/event=0x0,rem_socket=0xE/
+
+* Count event id 0x0 for the traffic from remote socket 0, 2, and 3 to socket 1::
+
+   perf stat -a -e nvidia_cnvlink_pmu_1/event=0x0,rem_socket=0xD/
+
+* Count event id 0x0 for the traffic from remote socket 0, 1, and 3 to socket 2::
+
+   perf stat -a -e nvidia_cnvlink_pmu_2/event=0x0,rem_socket=0xB/
+
+* Count event id 0x0 for the traffic from remote socket 0, 1, and 2 to socket 3::
+
+   perf stat -a -e nvidia_cnvlink_pmu_3/event=0x0,rem_socket=0x7/
+
+
+PCIE PMU
+------------
+
+The PCIE PMU monitors all read/write traffic from PCIE root ports to
+local/remote memory. Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section`
+for more info about the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_pcie_pmu_<socket-id>.
+
+Each SoC socket can support multiple root ports. The user can use
+"root_port" bitmap parameter to select the port(s) to monitor, i.e.
+"root_port=0xF" corresponds to root port 0 to 3.
+/sys/bus/event_sources/devices/nvidia_pcie_pmu_<socket-id>/format/root_port
+shows the valid bits that can be set in the "root_port" parameter.
+
+Example usage:
+
+* Count event id 0x0 from root port 0 and 1 of socket 0::
+
+   perf stat -a -e nvidia_pcie_pmu_0/event=0x0,root_port=0x3/
+
+* Count event id 0x0 from root port 0 and 1 of socket 1::
+
+   perf stat -a -e nvidia_pcie_pmu_1/event=0x0,root_port=0x3/
+
+.. _NVIDIA_Uncore_PMU_Traffic_Coverage_Section:
+
+Traffic Coverage
+----------------
+
+The PMU traffic coverage may vary dependent on the chip configuration:
+
+* **NVIDIA Grace Hopper Superchip**: Hopper GPU is connected with Grace SoC.
+
+  Example configuration with two Grace SoCs::
+
+   *********************************          *********************************
+   * SOCKET-A                      *          * SOCKET-B                      *
+   *                               *          *                               *
+   *                     ::::::::  *          *  ::::::::                     *
+   *                     : PCIE :  *          *  : PCIE :                     *
+   *                     ::::::::  *          *  ::::::::                     *
+   *                         |     *          *      |                        *
+   *                         |     *          *      |                        *
+   *  :::::::            ::::::::: *          *  :::::::::            ::::::: *
+   *  :     :            :       : *          *  :       :            :     : *
+   *  : GPU :<--NVLink-->: Grace :<---CNVLink--->: Grace :<--NVLink-->: GPU : *
+   *  :     :    C2C     :  SoC  : *          *  :  SoC  :    C2C     :     : *
+   *  :::::::            ::::::::: *          *  :::::::::            ::::::: *
+   *     |                   |     *          *      |                   |    *
+   *     |                   |     *          *      |                   |    *
+   *  &&&&&&&&           &&&&&&&&  *          *   &&&&&&&&           &&&&&&&& *
+   *  & GMEM &           & CMEM &  *          *   & CMEM &           & GMEM & *
+   *  &&&&&&&&           &&&&&&&&  *          *   &&&&&&&&           &&&&&&&& *
+   *                               *          *                               *
+   *********************************          *********************************
+
+   GMEM = GPU Memory (e.g. HBM)
+   CMEM = CPU Memory (e.g. LPDDR5X)
+
+  |
+  | Following table contains traffic coverage of Grace SoC PMU in socket-A:
+
+  ::
+
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   |              |                        Source                             |
+   +              +-------+-----------+-----------+-----+----------+----------+
+   | Destination  |       |GPU ATS    |GPU Not-ATS|     | Socket-B | Socket-B |
+   |              |PCI R/W|Translated,|Translated | CPU | CPU/PCIE1| GPU/PCIE2|
+   |              |       |EGM        |           |     |          |          |
+   +==============+=======+===========+===========+=====+==========+==========+
+   | Local        | PCIE  |NVLink-C2C0|NVLink-C2C1| SCF | SCF PMU  | CNVLink  |
+   | SYSRAM/CMEM  | PMU   |PMU        |PMU        | PMU |          | PMU      |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   | Local GMEM   | PCIE  |    N/A    |NVLink-C2C1| SCF | SCF PMU  | CNVLink  |
+   |              | PMU   |           |PMU        | PMU |          | PMU      |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   | Remote       | PCIE  |NVLink-C2C0|NVLink-C2C1| SCF |          |          |
+   | SYSRAM/CMEM  | PMU   |PMU        |PMU        | PMU |   N/A    |   N/A    |
+   | over CNVLink |       |           |           |     |          |          |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   | Remote GMEM  | PCIE  |NVLink-C2C0|NVLink-C2C1| SCF |          |          |
+   | over CNVLink | PMU   |PMU        |PMU        | PMU |   N/A    |   N/A    |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+
+   PCIE1 traffic represents strongly ordered (SO) writes.
+   PCIE2 traffic represents reads and relaxed ordered (RO) writes.
+
+* **NVIDIA Grace CPU Superchip**: two Grace CPU SoCs are connected.
+
+  Example configuration with two Grace SoCs::
+
+   *******************             *******************
+   * SOCKET-A        *             * SOCKET-B        *
+   *                 *             *                 *
+   *    ::::::::     *             *    ::::::::     *
+   *    : PCIE :     *             *    : PCIE :     *
+   *    ::::::::     *             *    ::::::::     *
+   *        |        *             *        |        *
+   *        |        *             *        |        *
+   *    :::::::::    *             *    :::::::::    *
+   *    :       :    *             *    :       :    *
+   *    : Grace :<--------NVLink------->: Grace :    *
+   *    :  SoC  :    *     C2C     *    :  SoC  :    *
+   *    :::::::::    *             *    :::::::::    *
+   *        |        *             *        |        *
+   *        |        *             *        |        *
+   *     &&&&&&&&    *             *     &&&&&&&&    *
+   *     & CMEM &    *             *     & CMEM &    *
+   *     &&&&&&&&    *             *     &&&&&&&&    *
+   *                 *             *                 *
+   *******************             *******************
+
+   GMEM = GPU Memory (e.g. HBM)
+   CMEM = CPU Memory (e.g. LPDDR5X)
+
+  |
+  | Following table contains traffic coverage of Grace SoC PMU in socket-A:
+
+  ::
+
+   +-----------------+-----------+---------+----------+-------------+
+   |                 |                      Source                  |
+   +                 +-----------+---------+----------+-------------+
+   | Destination     |           |         | Socket-B | Socket-B    |
+   |                 |  PCI R/W  |   CPU   | CPU/PCIE1| PCIE2       |
+   |                 |           |         |          |             |
+   +=================+===========+=========+==========+=============+
+   | Local           |  PCIE PMU | SCF PMU | SCF PMU  | NVLink-C2C0 |
+   | SYSRAM/CMEM     |           |         |          | PMU         |
+   +-----------------+-----------+---------+----------+-------------+
+   | Remote          |           |         |          |             |
+   | SYSRAM/CMEM     |  PCIE PMU | SCF PMU |   N/A    |     N/A     |
+   | over NVLink-C2C |           |         |          |             |
+   +-----------------+-----------+---------+----------+-------------+
+
+   PCIE1 traffic represents strongly ordered (SO) writes.
+   PCIE2 traffic represents reads and relaxed ordered (RO) writes.
diff --git a/Documentation/admin-guide/perf/qcom_l2_pmu.rst b/Documentation/admin-guide/perf/qcom_l2_pmu.rst
new file mode 100644
index 000000000..c130178a4
--- /dev/null
+++ b/Documentation/admin-guide/perf/qcom_l2_pmu.rst
@@ -0,0 +1,39 @@
+=====================================================================
+Qualcomm Technologies Level-2 Cache Performance Monitoring Unit (PMU)
+=====================================================================
+
+This driver supports the L2 cache clusters found in Qualcomm Technologies
+Centriq SoCs. There are multiple physical L2 cache clusters, each with their
+own PMU. Each cluster has one or more CPUs associated with it.
+
+There is one logical L2 PMU exposed, which aggregates the results from
+the physical PMUs.
+
+The driver provides a description of its available events and configuration
+options in sysfs, see /sys/devices/l2cache_0.
+
+The "format" directory describes the format of the events.
+
+Events can be envisioned as a 2-dimensional array. Each column represents
+a group of events. There are 8 groups. Only one entry from each
+group can be in use at a time. If multiple events from the same group
+are specified, the conflicting events cannot be counted at the same time.
+
+Events are specified as 0xCCG, where CC is 2 hex digits specifying
+the code (array row) and G specifies the group (column) 0-7.
+
+In addition there is a cycle counter event specified by the value 0xFE
+which is outside the above scheme.
+
+The driver provides a "cpumask" sysfs attribute which contains a mask
+consisting of one CPU per cluster which will be used to handle all the PMU
+events on that cluster.
+
+Examples for use with perf::
+
+  perf stat -e l2cache_0/config=0x001/,l2cache_0/config=0x042/ -a sleep 1
+
+  perf stat -e l2cache_0/config=0xfe/ -C 2 sleep 1
+
+The driver does not support sampling, therefore "perf record" will
+not work. Per-task perf sessions are not supported.
diff --git a/Documentation/admin-guide/perf/qcom_l3_pmu.rst b/Documentation/admin-guide/perf/qcom_l3_pmu.rst
new file mode 100644
index 000000000..a3d014a46
--- /dev/null
+++ b/Documentation/admin-guide/perf/qcom_l3_pmu.rst
@@ -0,0 +1,26 @@
+===========================================================================
+Qualcomm Datacenter Technologies L3 Cache Performance Monitoring Unit (PMU)
+===========================================================================
+
+This driver supports the L3 cache PMUs found in Qualcomm Datacenter Technologies
+Centriq SoCs. The L3 cache on these SOCs is composed of multiple slices, shared
+by all cores within a socket. Each slice is exposed as a separate uncore perf
+PMU with device name l3cache_<socket>_<instance>. User space is responsible
+for aggregating across slices.
+
+The driver provides a description of its available events and configuration
+options in sysfs, see /sys/devices/l3cache*. Given that these are uncore PMUs
+the driver also exposes a "cpumask" sysfs attribute which contains a mask
+consisting of one CPU per socket which will be used to handle all the PMU
+events on that socket.
+
+The hardware implements 32bit event counters and has a flat 8bit event space
+exposed via the "event" format attribute. In addition to the 32bit physical
+counters the driver supports virtual 64bit hardware counters by using hardware
+counter chaining. This feature is exposed via the "lc" (long counter) format
+flag. E.g.::
+
+  perf stat -e l3cache_0_0/read-miss,lc/
+
+Given that these are uncore PMUs the driver does not support sampling, therefore
+"perf record" will not work. Per-task perf sessions are not supported.
diff --git a/Documentation/admin-guide/perf/thunderx2-pmu.rst b/Documentation/admin-guide/perf/thunderx2-pmu.rst
new file mode 100644
index 000000000..01f158238
--- /dev/null
+++ b/Documentation/admin-guide/perf/thunderx2-pmu.rst
@@ -0,0 +1,44 @@
+=============================================================
+Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
+=============================================================
+
+The ThunderX2 SoC PMU consists of independent, system-wide, per-socket
+PMUs such as the Level 3 Cache (L3C), DDR4 Memory Controller (DMC) and
+Cavium Coherent Processor Interconnect (CCPI2).
+
+The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles.
+Events are counted for the default channel (i.e. channel 0) and prorated
+to the total number of channels/tiles.
+
+The DMC and L3C support up to 4 counters, while the CCPI2 supports up to 8
+counters. Counters are independently programmable to different events and
+can be started and stopped individually. None of the counters support an
+overflow interrupt. DMC and L3C counters are 32-bit and read every 2 seconds.
+The CCPI2 counters are 64-bit and assumed not to overflow in normal operation.
+
+PMU UNCORE (perf) driver:
+
+The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and
+L3C devices.  Each PMU can be used to count up to 4 (DMC/L3C) or up to 8
+(CCPI2) events simultaneously. The PMUs provide a description of their
+available events and configuration options under sysfs, see
+/sys/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
+
+The driver does not support sampling, therefore "perf record" will not
+work. Per-task perf sessions are also not supported.
+
+Examples::
+
+  # perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
+
+  # perf stat -a -e \
+  uncore_dmc_0/cnt_cycles/,\
+  uncore_dmc_0/data_transfers/,\
+  uncore_dmc_0/read_txns/,\
+  uncore_dmc_0/write_txns/ sleep 1
+
+  # perf stat -a -e \
+  uncore_l3c_0/read_request/,\
+  uncore_l3c_0/read_hit/,\
+  uncore_l3c_0/inv_request/,\
+  uncore_l3c_0/inv_hit/ sleep 1
diff --git a/Documentation/admin-guide/perf/xgene-pmu.rst b/Documentation/admin-guide/perf/xgene-pmu.rst
new file mode 100644
index 000000000..644f8ed89
--- /dev/null
+++ b/Documentation/admin-guide/perf/xgene-pmu.rst
@@ -0,0 +1,49 @@
+================================================
+APM X-Gene SoC Performance Monitoring Unit (PMU)
+================================================
+
+X-Gene SoC PMU consists of various independent system device PMUs such as
+L3 cache(s), I/O bridge(s), memory controller bridge(s) and memory
+controller(s). These PMU devices are loosely architected to follow the
+same model as the PMU for ARM cores. The PMUs share the same top level
+interrupt and status CSR region.
+
+PMU (perf) driver
+-----------------
+
+The xgene-pmu driver registers several perf PMU drivers. Each of the perf
+driver provides description of its available events and configuration options
+in sysfs, see /sys/devices/<l3cX/iobX/mcbX/mcX>/.
+
+The "format" directory describes format of the config (event ID),
+config1 (agent ID) fields of the perf_event_attr structure. The "events"
+directory provides configuration templates for all supported event types that
+can be used with perf tool. For example, "l3c0/bank-fifo-full/" is an
+equivalent of "l3c0/config=0x0b/".
+
+Most of the SoC PMU has a specific list of agent ID used for monitoring
+performance of a specific datapath. For example, agents of a L3 cache can be
+a specific CPU or an I/O bridge. Each PMU has a set of 2 registers capable of
+masking the agents from which the request come from. If the bit with
+the bit number corresponding to the agent is set, the event is counted only if
+it is caused by a request from that agent. Each agent ID bit is inversely mapped
+to a corresponding bit in "config1" field. By default, the event will be
+counted for all agent requests (config1 = 0x0). For all the supported agents of
+each PMU, please refer to APM X-Gene User Manual.
+
+Each perf driver also provides a "cpumask" sysfs attribute, which contains a
+single CPU ID of the processor which will be used to handle all the PMU events.
+
+Example for perf tool use::
+
+ / # perf list | grep -e l3c -e iob -e mcb -e mc
+   l3c0/ackq-full/                                    [Kernel PMU event]
+ <...>
+   mcb1/mcb-csw-stall/                                [Kernel PMU event]
+
+ / # perf stat -a -e l3c0/read-miss/,mcb1/csw-write-request/ sleep 1
+
+ / # perf stat -a -e l3c0/read-miss,config1=0xfffffffffffffffe/ sleep 1
+
+The driver does not support sampling, therefore "perf record" will
+not work. Per-task (without "-a") perf sessions are not supported.