diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:36 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 18:50:36 +0000 |
| commit | 50ba0232fd5312410f1b65247e774244f89a628e (patch) | |
| tree | fd8f2fc78e9e548af0ff9590276602ee6125be00 /Documentation/devicetree/bindings/arm | |
| parent | Releasing progress-linux version 6.7.12-1~progress7.99u1. (diff) | |
| download | linux-50ba0232fd5312410f1b65247e774244f89a628e.tar.xz linux-50ba0232fd5312410f1b65247e774244f89a628e.zip | |
Merging upstream version 6.8.9.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/arm')
26 files changed, 479 insertions, 339 deletions
diff --git a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml index a9fe01238a..76b65ea149 100644 --- a/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml +++ b/Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml @@ -16,7 +16,7 @@ maintainers: properties: compatible: - const: "calxeda,hb-sregs-l2-ecc" + const: calxeda,hb-sregs-l2-ecc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index ffd526363f..cc5a21b47e 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -198,6 +198,7 @@ properties: - qcom,kryo660 - qcom,kryo685 - qcom,kryo780 + - qcom,oryon - qcom,scorpion enable-method: diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 32b195852a..228dcc5c7d 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -967,6 +967,7 @@ properties: - menlo,mx8menlo # Verdin iMX8M Mini Module on i.MX8MM Menlo board - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia - toradex,verdin-imx8mm-nonwifi-dev # Verdin iMX8M Mini Module on Verdin Development Board + - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow - toradex,verdin-imx8mm-nonwifi-yavia # Verdin iMX8M Mini Module on Yavia - const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module @@ -977,6 +978,7 @@ properties: - enum: - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia - toradex,verdin-imx8mm-wifi-dev # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mm-wifi-yavia # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia - const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module @@ -1022,7 +1024,10 @@ properties: - description: Variscite VAR-SOM-MX8MN based boards items: - - const: variscite,var-som-mx8mn-symphony + - enum: + - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board + - rve,rve-gateway # i.MX8MN RVE Gateway Board + - variscite,var-som-mx8mn-symphony - const: variscite,var-som-mx8mn - const: fsl,imx8mn @@ -1048,6 +1053,9 @@ properties: - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board + - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel + - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel + - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules @@ -1100,6 +1108,7 @@ properties: - enum: - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board + - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow - toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module @@ -1110,6 +1119,7 @@ properties: - enum: - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module @@ -1476,6 +1486,16 @@ properties: - const: solidrun,lx2162a-som - const: fsl,lx2160a + - description: + TQ-Systems TQMLX2160A is a series of socketable SOM featuring + LX2160A system-on-chip variants. MBLX2160A mainboard can be used a + starterkit. + items: + - enum: + - tq,lx2160a-tqmlx2160a-mblx2160a + - const: tq,lx2160a-tqmlx2160a + - const: fsl,lx2160a + - description: S32G2 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/google.yaml b/Documentation/devicetree/bindings/arm/google.yaml new file mode 100644 index 0000000000..e20b5c9b16 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/google.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/google.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Tensor platforms + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel + devices. + + Currently upstream this is devices using "gs101" SoC which is found in Pixel + 6, Pixel 6 Pro and Pixel 6a. + + Google have a few different names for the SoC: + - Marketing name ("Tensor") + - Codename ("Whitechapel") + - SoC ID ("gs101") + - Die ID ("S5P9845") + + Likewise there are a couple of names for the actual device + - Marketing name ("Pixel 6") + - Codename ("Oriole") + + Devicetrees should use the lowercased SoC ID and lowercased board codename, + e.g. gs101 and gs101-oriole. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Google Pixel 6 / Oriole + items: + - enum: + - google,gs101-oriole + - const: google,gs101 + + # Bootloader requires empty ect node to be present + ect: + type: object + additionalProperties: false + +required: + - ect + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml index 5a53d433b6..7a221e1c09 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml @@ -82,6 +82,23 @@ properties: ranges: true +patternProperties: + '^clock@': + type: object + additionalProperties: false + + properties: + compatible: + enum: + - hisilicon,hi3620-clock + - hisilicon,hi3620-mmc-clock + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index 52d78521e4..16d2e132d3 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -60,4 +60,26 @@ properties: - const: marvell,armada-ap807-quad - const: marvell,armada-ap807 + - description: + Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus + Armada CN9130 COM Express CPU module + items: + - const: marvell,cn9130-ac5x-carrier + - const: marvell,rd-ac5x-carrier + - const: marvell,cn9130-cpu-module + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: + Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus + Armada CN9131 COM Express CPU module + items: + - const: marvell,cn9131-ac5x-carrier + - const: marvell,rd-ac5x-carrier + - const: marvell,cn9131-cpu-module + - const: marvell,cn9131 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a5999b3afc..6f2f64ae76 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -176,6 +176,10 @@ properties: - const: mediatek,mt8186 - items: - enum: + - mediatek,mt8188-evb + - const: mediatek,mt8188 + - items: + - enum: - mediatek,mt8192-evb - const: mediatek,mt8192 - items: @@ -235,6 +239,13 @@ properties: items: - const: google,kappa - const: mediatek,mt8183 + - description: Google Katsu (ASUS Chromebook Detachable CZ1) + items: + - enum: + - google,katsu-sku32 + - google,katsu-sku38 + - const: google,katsu + - const: mediatek,mt8183 - description: Google Kodama (Lenovo 10e Chromebook Tablet) items: - enum: @@ -244,6 +255,20 @@ properties: - google,kodama-sku32 - const: google,kodama - const: mediatek,mt8183 + - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2) + items: + - enum: + - google,makomo-sku0 + - google,makomo-sku1 + - const: google,makomo + - const: mediatek,mt8183 + - description: Google Pico (Acer Chromebook Spin 311) + items: + - enum: + - google,pico-sku1 + - google,pico-sku2 + - const: google,pico + - const: mediatek,mt8183 - description: Google Willow (Acer Chromebook 311 C722/C722T) items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt deleted file mode 100644 index 699776be1d..0000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ /dev/null @@ -1,39 +0,0 @@ -MediaTek AUDSYS controller -============================ - -The MediaTek AUDSYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-audsys", "syscon" - - "mediatek,mt6765-audsys", "syscon" - - "mediatek,mt6779-audio", "syscon" - - "mediatek,mt7622-audsys", "syscon" - - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - - "mediatek,mt8167-audiosys", "syscon" - - "mediatek,mt8183-audiosys", "syscon" - - "mediatek,mt8192-audsys", "syscon" - - "mediatek,mt8516-audsys", "syscon" -- #clock-cells: Must be 1 - -The AUDSYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Required sub-nodes: -------- -For common binding part and usage, refer to -../sonud/mt2701-afe-pcm.txt. - -Example: - - audsys: clock-controller@11220000 { - compatible = "mediatek,mt7622-audsys", "syscon"; - reg = <0 0x11220000 0 0x2000>; - #clock-cells = <1>; - - afe: audio-controller { - ... - }; - }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml new file mode 100644 index 0000000000..45d4a66200 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek AUDSYS controller + +maintainers: + - Eugen Hristev <eugen.hristev@collabora.com> + +description: + The MediaTek AUDSYS controller provides various clocks to the system. + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-audsys + - mediatek,mt6765-audsys + - mediatek,mt6779-audsys + - mediatek,mt7622-audsys + - mediatek,mt8167-audsys + - mediatek,mt8173-audsys + - mediatek,mt8183-audsys + - mediatek,mt8186-audsys + - mediatek,mt8192-audsys + - mediatek,mt8516-audsys + - const: syscon + - items: + # Special case for mt7623 for backward compatibility + - const: mediatek,mt7623-audsys + - const: mediatek,mt2701-audsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + audio-controller: + $ref: /schemas/sound/mediatek,mt2701-audio.yaml# + type: object + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt2701-power.h> + #include <dt-bindings/clock/mt2701-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt2701-audio"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&audsys CLK_AUD_I2SO1>, + <&audsys CLK_AUD_I2SO2>, + <&audsys CLK_AUD_I2SO3>, + <&audsys CLK_AUD_I2SO4>, + <&audsys CLK_AUD_I2SIN1>, + <&audsys CLK_AUD_I2SIN2>, + <&audsys CLK_AUD_I2SIN3>, + <&audsys CLK_AUD_I2SIN4>, + <&audsys CLK_AUD_ASRCO1>, + <&audsys CLK_AUD_ASRCO2>, + <&audsys CLK_AUD_ASRCO3>, + <&audsys CLK_AUD_ASRCO4>, + <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_AFE_CONN>, + <&audsys CLK_AUD_A1SYS>, + <&audsys CLK_AUD_A2SYS>, + <&audsys CLK_AUD_AFE_MRGIF>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; + + assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt deleted file mode 100644 index eccd4b706a..0000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ /dev/null @@ -1,29 +0,0 @@ -Mediatek ethsys controller -============================ - -The Mediatek ethsys controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be: - - "mediatek,mt2701-ethsys", "syscon" - - "mediatek,mt7622-ethsys", "syscon" - - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" - - "mediatek,mt7629-ethsys", "syscon" - - "mediatek,mt7981-ethsys", "syscon" - - "mediatek,mt7986-ethsys", "syscon" -- #clock-cells: Must be 1 -- #reset-cells: Must be 1 - -The ethsys controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Example: - -ethsys: clock-controller@1b000000 { - compatible = "mediatek,mt2701-ethsys", "syscon"; - reg = <0 0x1b000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml index ea98043c6b..230b5188a8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml @@ -30,6 +30,7 @@ properties: - mediatek,mt7629-infracfg - mediatek,mt7981-infracfg - mediatek,mt7986-infracfg + - mediatek,mt7988-infracfg - mediatek,mt8135-infracfg - mediatek,mt8167-infracfg - mediatek,mt8173-infracfg diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index 536f5a5ebd..b3c6888c14 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -32,6 +32,9 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8188-vdosys0 + - mediatek,mt8188-vdosys1 + - mediatek,mt8188-vppsys0 + - mediatek,mt8188-vppsys1 - mediatek,mt8192-mmsys - mediatek,mt8195-vdosys1 - mediatek,mt8195-vppsys0 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 26158d0d72..33c94c4918 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg - mediatek,mt8186-pericfg + - mediatek,mt8188-pericfg - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt deleted file mode 100644 index 606b4b1b70..0000000000 --- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt +++ /dev/null @@ -1,84 +0,0 @@ -QCOM Idle States for cpuidle driver - -ARM provides idle-state node to define the cpuidle states, as defined in [1]. -cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle -states. Idle states have different enter/exit latency and residency values. -The idle states supported by the QCOM SoC are defined as - - - * Standby - * Retention - * Standalone Power Collapse (Standalone PC or SPC) - * Power Collapse (PC) - -Standby: Standby does a little more in addition to architectural clock gating. -When the WFI instruction is executed the ARM core would gate its internal -clocks. In addition to gating the clocks, QCOM cpus use this instruction as a -trigger to execute the SPM state machine. The SPM state machine waits for the -interrupt to trigger the core back in to active. This triggers the cache -hierarchy to enter standby states, when all cpus are idle. An interrupt brings -the SPM state machine out of its wait, the next step is to ensure that the -cache hierarchy is also out of standby, and then the cpu is allowed to resume -execution. This state is defined as a generic ARM WFI state by the ARM cpuidle -driver and is not defined in the DT. The SPM state machine should be -configured to execute this state by default and after executing every other -state below. - -Retention: Retention is a low power state where the core is clock gated and -the memory and the registers associated with the core are retained. The -voltage may be reduced to the minimum value needed to keep the processor -registers active. The SPM should be configured to execute the retention -sequence and would wait for interrupt, before restoring the cpu to execution -state. Retention may have a slightly higher latency than Standby. - -Standalone PC: A cpu can power down and warmboot if there is a sufficient time -between the time it enters idle and the next known wake up. SPC mode is used -to indicate a core entering a power down state without consulting any other -cpu or the system resources. This helps save power only on that core. The SPM -sequence for this idle state is programmed to power down the supply to the -core, wait for the interrupt, restore power to the core, and ensure the -system state including cache hierarchy is ready before allowing core to -resume. Applying power and resetting the core causes the core to warmboot -back into Elevation Level (EL) which trampolines the control back to the -kernel. Entering a power down state for the cpu, needs to be done by trapping -into a EL. Failing to do so, would result in a crash enforced by the warm boot -code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to -be flushed in s/w, before powering down the core. - -Power Collapse: This state is similar to the SPC mode, but distinguishes -itself in that the cpu acknowledges and permits the SoC to enter deeper sleep -modes. In a hierarchical power domain SoC, this means L2 and other caches can -be flushed, system bus, clocks - lowered, and SoC main XO clock gated and -voltages reduced, provided all cpus enter this state. Since the span of low -power modes possible at this state is vast, the exit latency and the residency -of this low power mode would be considered high even though at a cpu level, -this essentially is cpu power down. The SPM in this state also may handshake -with the Resource power manager (RPM) processor in the SoC to indicate a -complete application processor subsystem shut down. - -The idle-state for QCOM SoCs are distinguished by the compatible property of -the idle-states device node. - -The devicetree representation of the idle state should be - - -Required properties: - -- compatible: Must be one of - - "qcom,idle-state-ret", - "qcom,idle-state-spc", - "qcom,idle-state-pc", - and "arm,idle-state". - -Other required and optional properties are specified in [1]. - -Example: - - idle-states { - CPU_SPC: spc { - compatible = "qcom,idle-state-spc", "arm,idle-state"; - entry-latency-us = <150>; - exit-latency-us = <200>; - min-residency-us = <2000>; - }; - }; - -[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml new file mode 100644 index 0000000000..4fd5752978 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell) + +maintainers: + - Jinlong Mao <quic_jinlmao@quicinc.com> + - Tao Zhang <quic_taozha@quicinc.com> + +description: + Support for ETM trace collection on remote processor using coresight + framework. Enabling this will allow turning on ETM tracing on remote + processor like modem processor via sysfs and collecting the trace + via coresight TMC sinks. + +properties: + compatible: + const: qcom,coresight-remote-etm + + out-ports: + $ref: /schemas/graph.yaml#/properties/ports + additionalProperties: false + + properties: + port: + description: Output connection to the CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - out-ports + +additionalProperties: false + +examples: + - | + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm0_out_funnel_modem: endpoint { + remote-endpoint = <&funnel_modem_in_modem_etm0>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 3bad47b7b0..61ddc3b5b2 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -44,6 +44,23 @@ properties: minItems: 1 maxItems: 2 + qcom,dsb-element-size: + description: + Specifies the DSB(Discrete Single Bit) element size supported by + the monitor. The associated aggregator will read this size before it + is enabled. DSB element size currently only supports 32-bit and 64-bit. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [32, 64] + + qcom,dsb-msrs-num: + description: + Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) + registers supported by the monitor. If this property is not configured + or set to 0, it means this DSB TPDM doesn't support MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 @@ -77,6 +94,9 @@ examples: compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0684c000 0x1000>; + qcom,dsb-element-size = /bits/ 8 <32>; + qcom,dsb-msrs-num = <16>; + clocks = <&aoss_qmp>; clock-names = "apb_pclk"; diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml index 97621c92a1..d0751a572a 100644 --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -23,7 +23,7 @@ description: | select: properties: compatible: - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" required: - compatible @@ -31,17 +31,17 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK, # but do not add completely new entries to these: - - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" - enum: - qcom,dsi-ctrl-6g-qcm2290 - qcom,gpucc-sdm630 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 8a6466d1fc..1a5fb889a4 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -87,29 +87,18 @@ description: | sm8350 sm8450 sm8550 + sm8650 + x1e80100 The 'board' element must be one of the following strings: adp - ap-al02-c2 - ap-al02-c6 - ap-al02-c7 - ap-al02-c8 - ap-al02-c9 - ap-mi01.2 - ap-mi01.3 - ap-mi01.6 - ap-mi01.9 cdp - cp01-c1 dragonboard - hk01 - hk10-c1 - hk10-c2 idp liquid - rdp432-c2 mtp + qcp qrd rb2 ride @@ -186,11 +175,24 @@ properties: - items: - enum: + - microsoft,dempsey + - microsoft,makepeace + - microsoft,moneypenny - samsung,s3ve3g - const: qcom,msm8226 - items: - enum: + - htc,memul + - microsoft,superman-lte + - microsoft,tesla + - motorola,peregrine + - const: qcom,msm8926 + - const: qcom,msm8226 + + - items: + - enum: + - huawei,kiwi - longcheer,l9100 - samsung,a7 - sony,kanuti-tulip @@ -397,6 +399,8 @@ properties: - items: - enum: - fairphone,fp5 + - qcom,qcm6490-idp + - qcom,qcs6490-rb3gen2 - const: qcom,qcm6490 - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform @@ -1009,6 +1013,7 @@ properties: - sony,pdx203-generic - sony,pdx206-generic - xiaomi,elish + - xiaomi,pipa - const: qcom,sm8250 - items: @@ -1034,6 +1039,18 @@ properties: - qcom,sm8550-qrd - const: qcom,sm8550 + - items: + - enum: + - qcom,sm8650-mtp + - qcom,sm8650-qrd + - const: qcom,sm8650 + + - items: + - enum: + - qcom,x1e80100-crd + - qcom,x1e80100-qcp + - const: qcom,x1e80100 + # Board compatibles go above qcom,msm-id: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 5f7c6c4aad..5cf5cbef2c 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -30,9 +30,11 @@ properties: - const: amarula,vyasa-rk3288 - const: rockchip,rk3288 - - description: Anbernic RG351M + - description: Anbernic RK3326 Handheld Gaming Console items: - - const: anbernic,rg351m + - enum: + - anbernic,rg351m + - anbernic,rg351v - const: rockchip,rk3326 - description: Anbernic RG353P @@ -95,22 +97,30 @@ properties: - const: chipspark,rayeager-px2 - const: rockchip,rk3066a + - description: Cool Pi Compute Module 5(CM5) EVB + items: + - enum: + - coolpi,pi-cm5-evb + - const: coolpi,pi-cm5 + - const: rockchip,rk3588 + + - description: Cool Pi 4 Model B + items: + - const: coolpi,pi-4b + - const: rockchip,rk3588s + - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards items: - const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board - const: edgeble,neural-compute-module-2 # Edgeble Neural Compute Module 2 SoM - const: rockchip,rv1126 - - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards - items: - - const: edgeble,neural-compute-module-6a-io # Edgeble Neural Compute Module 6A IO Board - - const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM - - const: rockchip,rk3588 - - - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards + - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards items: - - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board - - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM + - const: edgeble,neural-compute-module-6a-io # Edgeble NCM6A-IO Board + - enum: + - edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM + - edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM - const: rockchip,rk3588 - description: Elgin RV1108 R1 @@ -237,6 +247,11 @@ properties: - const: geekbuying,geekbox - const: rockchip,rk3368 + - description: Geniatech XPI-3128 + items: + - const: geniatech,xpi-3128 + - const: rockchip,rk3128 + - description: Google Bob (Asus Chromebook Flip C101PA) items: - const: google,bob-rev13 @@ -674,9 +689,12 @@ properties: - const: pine64,soquartz - const: rockchip,rk3566 - - description: Powkiddy RGB30 + - description: Powkiddy RK3566 Handheld Gaming Console items: - - const: powkiddy,rgb30 + - enum: + - powkiddy,rgb30 + - powkiddy,rk2023 + - powkiddy,x55 - const: rockchip,rk3566 - description: Radxa Compute Module 3(CM3) @@ -875,6 +893,11 @@ properties: - const: tsd,rk3399-puma-haikou - const: rockchip,rk3399 + - description: Theobroma Systems RK3588-SBC Jaguar + items: + - const: tsd,rk3588-jaguar + - const: rockchip,rk3588 + - description: Tronsmart Orion R68 Meta items: - const: tronsmart,orion-r68-meta @@ -922,6 +945,13 @@ properties: - const: rockchip,rk3568-bpi-r2pro - const: rockchip,rk3568 + - description: Sonoff iHost Smart Home Hub + items: + - const: itead,sonoff-ihost + - enum: + - rockchip,rv1126 + - rockchip,rv1109 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index e3ffd8159a..01dcbd8aa7 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -230,6 +230,12 @@ properties: - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK - const: samsung,exynosautov9 + - description: Exynos Auto v920 based boards + items: + - enum: + - samsung,exynosautov920-sadk # Samsung Exynos Auto v920 SADK + - const: samsung,exynosautov920 + required: - compatible diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index eaa67b8e0d..40fc3c8b9d 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -35,6 +35,11 @@ properties: - sprd,ums512-1h10 - const: sprd,ums512 + - items: + - enum: + - sprd,ums9620-2h10 + - const: sprd,ums9620 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index df087c81c6..bc2f43330a 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -82,29 +82,19 @@ properties: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 + - st,stm32mp157c-ed1-scmi - st,stm32mp157a-dk1 + - st,stm32mp157a-dk1-scmi - st,stm32mp157c-dk2 + - st,stm32mp157c-dk2-scmi - const: st,stm32mp157 - items: - - const: st,stm32mp157a-dk1-scmi - - const: st,stm32mp157a-dk1 - - const: st,stm32mp157 - - items: - - const: st,stm32mp157c-dk2-scmi - - const: st,stm32mp157c-dk2 - - const: st,stm32mp157 - - items: - - const: st,stm32mp157c-ed1-scmi - - const: st,stm32mp157c-ed1 - - const: st,stm32mp157 - - items: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 - items: - const: st,stm32mp157c-ev1-scmi - - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 11c5ce941d..a9d8e85565 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -868,6 +868,11 @@ properties: - const: topwise,a721 - const: allwinner,sun4i-a10 + - description: Transpeed 8K618-T + items: + - const: transpeed,8k618-t + - const: allwinner,sun50i-h618 + - description: Utoo P66 items: - const: utoo,p66 @@ -1013,6 +1018,11 @@ properties: - const: xunlong,orangepi-zero2 - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi Zero 2W + items: + - const: xunlong,orangepi-zero2w + - const: allwinner,sun50i-h618 + - description: Xunlong OrangePi Zero 3 items: - const: xunlong,orangepi-zero3 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 03d2a0d79f..c6506bccfe 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -50,6 +50,7 @@ properties: - enum: - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia - toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board + - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow - toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia - const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT - const: toradex,verdin-am62 # Verdin AM62 Module @@ -60,6 +61,7 @@ properties: - enum: - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia - toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow - toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia - const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module - const: toradex,verdin-am62 # Verdin AM62 Module diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml index b18fc04639..93e04a109a 100644 --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -134,6 +134,8 @@ properties: - amazon,omap4-kc1 # Amazon Kindle Fire (first generation) - motorola,droid4 # Motorola Droid 4 XT894 - motorola,droid-bionic # Motorola Droid Bionic XT875 + - motorola,xyboard-mz609 + - motorola,xyboard-mz617 - ti,omap4-panda - ti,omap4-sdp - const: ti,omap4430 diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml deleted file mode 100644 index f57ed03478..0000000000 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ /dev/null @@ -1,137 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/xilinx.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Xilinx Zynq Platforms - -maintainers: - - Michal Simek <michal.simek@amd.com> - -description: | - Xilinx boards with Zynq-7000 SOC or Zynq UltraScale+ MPSoC - -properties: - $nodename: - const: '/' - compatible: - oneOf: - - items: - - enum: - - adapteva,parallella - - digilent,zynq-zybo - - digilent,zynq-zybo-z7 - - ebang,ebaz4205 - - myir,zynq-zturn-v5 - - myir,zynq-zturn - - xlnx,zynq-cc108 - - xlnx,zynq-zc702 - - xlnx,zynq-zc706 - - xlnx,zynq-zc770-xm010 - - xlnx,zynq-zc770-xm011 - - xlnx,zynq-zc770-xm012 - - xlnx,zynq-zc770-xm013 - - const: xlnx,zynq-7000 - - - items: - - const: avnet,zynq-microzed - - const: xlnx,zynq-microzed - - const: xlnx,zynq-7000 - - - items: - - const: avnet,zynq-zed - - const: xlnx,zynq-zed - - const: xlnx,zynq-7000 - - - items: - - enum: - - xlnx,zynqmp-zc1751 - - const: xlnx,zynqmp - - - description: Xilinx internal board zc1232 - items: - - const: xlnx,zynqmp-zc1232-revA - - const: xlnx,zynqmp-zc1232 - - const: xlnx,zynqmp - - - description: Xilinx internal board zc1254 - items: - - const: xlnx,zynqmp-zc1254-revA - - const: xlnx,zynqmp-zc1254 - - const: xlnx,zynqmp - - - description: Xilinx evaluation board zcu1275 - items: - - const: xlnx,zynqmp-zcu1275-revA - - const: xlnx,zynqmp-zcu1275 - - const: xlnx,zynqmp - - - description: Xilinx 96boards compatible board zcu100 - items: - - const: xlnx,zynqmp-zcu100-revC - - const: xlnx,zynqmp-zcu100 - - const: xlnx,zynqmp - - - description: Xilinx 96boards compatible board Ultra96 - items: - - const: avnet,ultra96-rev1 - - const: avnet,ultra96 - - const: xlnx,zynqmp-zcu100-revC - - const: xlnx,zynqmp-zcu100 - - const: xlnx,zynqmp - - - description: Xilinx evaluation board zcu102 - items: - - enum: - - xlnx,zynqmp-zcu102-revA - - xlnx,zynqmp-zcu102-revB - - xlnx,zynqmp-zcu102-rev1.0 - - xlnx,zynqmp-zcu102-rev1.1 - - const: xlnx,zynqmp-zcu102 - - const: xlnx,zynqmp - - - description: Xilinx evaluation board zcu104 - items: - - enum: - - xlnx,zynqmp-zcu104-revA - - xlnx,zynqmp-zcu104-revC - - xlnx,zynqmp-zcu104-rev1.0 - - const: xlnx,zynqmp-zcu104 - - const: xlnx,zynqmp - - - description: Xilinx evaluation board zcu106 - items: - - enum: - - xlnx,zynqmp-zcu106-revA - - xlnx,zynqmp-zcu106-rev1.0 - - const: xlnx,zynqmp-zcu106 - - const: xlnx,zynqmp - - - description: Xilinx evaluation board zcu111 - items: - - enum: - - xlnx,zynqmp-zcu111-revA - - xlnx,zynqmp-zcu111-rev1.0 - - const: xlnx,zynqmp-zcu111 - - const: xlnx,zynqmp - - - description: Xilinx Kria SOMs - items: - - const: xlnx,zynqmp-sm-k26-rev1 - - const: xlnx,zynqmp-sm-k26-revB - - const: xlnx,zynqmp-sm-k26-revA - - const: xlnx,zynqmp-sm-k26 - - const: xlnx,zynqmp - - - description: Xilinx Kria SOMs (starter) - items: - - const: xlnx,zynqmp-smk-k26-rev1 - - const: xlnx,zynqmp-smk-k26-revB - - const: xlnx,zynqmp-smk-k26-revA - - const: xlnx,zynqmp-smk-k26 - - const: xlnx,zynqmp - -additionalProperties: true - -... |