Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 51 deletions

diff --git a/Documentation/devicetree/bindings/ata/ahci-mtk.txt b/Documentation/devicetree/bindings/ata/ahci-mtk.txt
deleted file mode 100644
index d2aa696b16..0000000000
--- a/Documentation/devicetree/bindings/ata/ahci-mtk.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-MediaTek Serial ATA controller
-
-Required properties:
- - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
-		     When using "mediatek,mtk-ahci" compatible strings, you
-		     need SoC specific ones in addition, one of:
-		     - "mediatek,mt7622-ahci"
- - reg		   : Physical base addresses and length of register sets.
- - interrupts	   : Interrupt associated with the SATA device.
- - interrupt-names : Associated name must be: "hostc".
- - clocks	   : A list of phandle and clock specifier pairs, one for each
-		     entry in clock-names.
- - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
- - phys		   : A phandle and PHY specifier pair for the PHY port.
- - phy-names	   : Associated name must be: "sata-phy".
- - ports-implemented : See ./ahci-platform.txt for details.
-
-Optional properties:
- - power-domains   : A phandle and power domain specifier pair to the power
-		     domain which is responsible for collapsing and restoring
-		     power to the peripheral.
- - resets	   : Must contain an entry for each entry in reset-names.
-		     See ../reset/reset.txt for details.
- - reset-names	   : Associated names must be: "axi", "sw", "reg".
- - mediatek,phy-mode : A phandle to the system controller, used to enable
-		       SATA function.
-
-Example:
-
-	sata: sata@1a200000 {
-		compatible = "mediatek,mt7622-ahci",
-			     "mediatek,mtk-ahci";
-		reg = <0 0x1a200000 0 0x1100>;
-		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hostc";
-		clocks = <&pciesys CLK_SATA_AHB_EN>,
-			 <&pciesys CLK_SATA_AXI_EN>,
-			 <&pciesys CLK_SATA_ASIC_EN>,
-			 <&pciesys CLK_SATA_RBC_EN>,
-			 <&pciesys CLK_SATA_PM_EN>;
-		clock-names = "ahb", "axi", "asic", "rbc", "pm";
-		phys = <&u3port1 PHY_TYPE_SATA>;
-		phy-names = "sata-phy";
-		ports-implemented = <0x1>;
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
-			 <&pciesys MT7622_SATA_PHY_SW_RST>,
-			 <&pciesys MT7622_SATA_PHY_REG_RST>;
-		reset-names = "axi", "sw", "reg";
-		mediatek,phy-mode = <&pciesys>;
-	};