diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
| commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
| tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/devicetree/bindings/crypto | |
| parent | Initial commit. (diff) | |
| download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip | |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/crypto')
46 files changed, 2947 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml new file mode 100644 index 0000000000..0401c11da8 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Security System + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun5i-a13-crypto + - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun6i-a31-crypto + - const: allwinner,sun4i-a10-crypto + - items: + - const: allwinner,sun7i-a20-crypto + - const: allwinner,sun4i-a10-crypto + - const: allwinner,sun8i-a33-crypto + - items: + - const: allwinner,sun8i-v3s-crypto + - const: allwinner,sun8i-a33-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: ahb + - const: mod + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + resets: + maxItems: 1 + + reset-names: + const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +if: + properties: + compatible: + contains: + enum: + - allwinner,sun6i-a31-crypto + - allwinner,sun8i-a33-crypto + +then: + required: + - resets + - reset-names + +additionalProperties: false + +examples: + - | + crypto: crypto-engine@1c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <86>; + clocks = <&ahb_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + }; + +... diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml new file mode 100644 index 0000000000..4287678aa7 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/allwinner,sun8i-ce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Crypto Engine driver + +maintainers: + - Corentin Labbe <clabbe.montjoie@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun8i-h3-crypto + - allwinner,sun8i-r40-crypto + - allwinner,sun20i-d1-crypto + - allwinner,sun50i-a64-crypto + - allwinner,sun50i-h5-crypto + - allwinner,sun50i-h6-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus clock + - description: Module clock + - description: MBus clock + - description: TRNG clock (RC oscillator) + minItems: 2 + + clock-names: + items: + - const: bus + - const: mod + - const: ram + - const: trng + minItems: 2 + + resets: + maxItems: 1 + +if: + properties: + compatible: + enum: + - allwinner,sun20i-d1-crypto +then: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 +else: + if: + properties: + compatible: + const: allwinner,sun50i-h6-crypto + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + minItems: 3 + maxItems: 3 + else: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun50i-a64-ccu.h> + #include <dt-bindings/reset/sun50i-a64-ccu.h> + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-h3-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ss.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ss.yaml new file mode 100644 index 0000000000..8a29d36edf --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ss.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/allwinner,sun8i-ss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Security System v2 driver + +maintainers: + - Corentin Labbe <corentin.labbe@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun8i-a83t-crypto + - allwinner,sun9i-a80-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus clock + - description: Module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-a83t-ccu.h> + #include <dt-bindings/reset/sun8i-a83t-ccu.h> + + crypto: crypto@1c15000 { + compatible = "allwinner,sun8i-a83t-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_SS>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; + clock-names = "bus", "mod"; + }; diff --git a/Documentation/devicetree/bindings/crypto/amd-ccp.txt b/Documentation/devicetree/bindings/crypto/amd-ccp.txt new file mode 100644 index 0000000000..d87579d63d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/amd-ccp.txt @@ -0,0 +1,17 @@ +* AMD Cryptographic Coprocessor driver (ccp) + +Required properties: +- compatible: Should be "amd,ccp-seattle-v1a" +- reg: Address and length of the register set for the device +- interrupts: Should contain the CCP interrupt + +Optional properties: +- dma-coherent: Present if dma operations are coherent + +Example: + ccp@e0100000 { + compatible = "amd,ccp-seattle-v1a"; + reg = <0 0xe0100000 0 0x10000>; + interrupt-parent = <&gic>; + interrupts = <0 3 4>; + }; diff --git a/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml new file mode 100644 index 0000000000..948e11ebe4 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/amlogic,gxl-crypto.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/amlogic,gxl-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic GXL Cryptographic Offloader + +maintainers: + - Corentin Labbe <clabbe@baylibre.com> + +properties: + compatible: + items: + - const: amlogic,gxl-crypto + + reg: + maxItems: 1 + + interrupts: + items: + - description: Interrupt for flow 0 + - description: Interrupt for flow 1 + + clocks: + maxItems: 1 + + clock-names: + const: blkmv + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/gxbb-clkc.h> + + crypto: crypto-engine@c883e000 { + compatible = "amlogic,gxl-crypto"; + reg = <0xc883e000 0x36>; + interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_BLKMV>; + clock-names = "blkmv"; + }; diff --git a/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml new file mode 100644 index 0000000000..9c97874a6d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/arm,cryptocell.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/arm,cryptocell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm TrustZone CryptoCell cryptographic engine + +maintainers: + - Gilad Ben-Yossef <gilad@benyossef.com> + +properties: + compatible: + enum: + - arm,cryptocell-713-ree + - arm,cryptocell-703-ree + - arm,cryptocell-712-ree + - arm,cryptocell-710-ree + - arm,cryptocell-630p-ree + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + arm_cc712: crypto@80000000 { + compatible = "arm,cryptocell-712-ree"; + reg = <0x80000000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt new file mode 100644 index 0000000000..d9cca4875b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/artpec6-crypto.txt @@ -0,0 +1,16 @@ +Axis crypto engine with PDMA interface. + +Required properties: +- compatible : Should be one of the following strings: + "axis,artpec6-crypto" for the version in the Axis ARTPEC-6 SoC + "axis,artpec7-crypto" for the version in the Axis ARTPEC-7 SoC. +- reg: Base address and size for the PDMA register area. +- interrupts: Interrupt handle for the PDMA interrupt line. + +Example: + +crypto@f4264000 { + compatible = "axis,artpec6-crypto"; + reg = <0xf4264000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml new file mode 100644 index 0000000000..a772d232de --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED HACE hash and crypto Hardware Accelerator Engines + +maintainers: + - Neal Liu <neal_liu@aspeedtech.com> + +description: | + The Hash and Crypto Engine (HACE) is designed to accelerate the throughput + of hash data digest, encryption, and decryption. Basically, HACE can be + divided into two independently engines - Hash Engine and Crypto Engine. + +properties: + compatible: + enum: + - aspeed,ast2500-hace + - aspeed,ast2600-hace + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + hace: crypto@1e6d0000 { + compatible = "aspeed,ast2600-hace"; + reg = <0x1e6d0000 0x200>; + interrupts = <4>; + clocks = <&syscon ASPEED_CLK_GATE_YCLK>; + resets = <&syscon ASPEED_RESET_HACE>; + }; diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml new file mode 100644 index 0000000000..b18f178aac --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED ACRY ECDSA/RSA Hardware Accelerator Engines + +maintainers: + - Neal Liu <neal_liu@aspeedtech.com> + +description: + The ACRY ECDSA/RSA engines is designed to accelerate the throughput + of ECDSA/RSA signature and verification. Basically, ACRY can be + divided into two independent engines - ECC Engine and RSA Engine. + +properties: + compatible: + enum: + - aspeed,ast2600-acry + + reg: + items: + - description: acry base address & size + - description: acry sram base address & size + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + acry: crypto@1e6fa000 { + compatible = "aspeed,ast2600-acry"; + reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>; + interrupts = <160>; + clocks = <&syscon ASPEED_CLK_GATE_RSACLK>; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml new file mode 100644 index 0000000000..0b7383b310 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +properties: + compatible: + const: atmel,at91sam9g46-aes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: aes_clk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + aes: crypto@e1810000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xe1810000 0x100>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml new file mode 100644 index 0000000000..ee2ffb0343 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +properties: + compatible: + const: atmel,at91sam9g46-sha + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: sha_clk + + dmas: + maxItems: 1 + description: TX DMA Channel + + dma-names: + const: tx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + sha: crypto@e1814000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xe1814000 0x100>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml new file mode 100644 index 0000000000..3d6ed24b1b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator + +maintainers: + - Tudor Ambarus <tudor.ambarus@linaro.org> + +properties: + compatible: + const: atmel,at91sam9g46-tdes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: tdes_clk + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + + tdes: crypto@e2014000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xe2014000 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt new file mode 100644 index 0000000000..29b6007568 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/brcm,spu-crypto.txt @@ -0,0 +1,22 @@ +The Broadcom Secure Processing Unit (SPU) hardware supports symmetric +cryptographic offload for Broadcom SoCs. A SoC may have multiple SPU hardware +blocks. + +Required properties: +- compatible: Should be one of the following: + brcm,spum-crypto - for devices with SPU-M hardware + brcm,spu2-crypto - for devices with SPU2 hardware + brcm,spu2-v2-crypto - for devices with enhanced SPU2 hardware features like SHA3 + and Rabin Fingerprint support + brcm,spum-nsp-crypto - for the Northstar Plus variant of the SPU-M hardware + +- reg: Should contain SPU registers location and length. +- mboxes: The mailbox channel to be used to communicate with the SPU. + Mailbox channels correspond to DMA rings on the device. + +Example: + crypto@612d0000 { + compatible = "brcm,spum-crypto"; + reg = <0 0x612d0000 0 0x900>; + mboxes = <&pdc0 0>; + }; diff --git a/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml new file mode 100644 index 0000000000..b633b8d0e6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/cortina,sl3516-crypto.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/cortina,sl3516-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SL3516 cryptographic offloader driver + +maintainers: + - Corentin Labbe <clabbe@baylibre.com> + +properties: + compatible: + enum: + - cortina,sl3516-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + + crypto@62000000 { + compatible = "cortina,sl3516-crypto"; + reg = <0x62000000 0x10000>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_SECURITY>; + clocks = <&syscon GEMINI_CLK_GATE_SECURITY>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml new file mode 100644 index 0000000000..e879bc0be8 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2008-2011 Freescale Semiconductor Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0-mon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Secure Non-Volatile Storage (SNVS) + +maintainers: + - '"Horia Geantă" <horia.geanta@nxp.com>' + - Pankaj Gupta <pankaj.gupta@nxp.com> + - Gaurav Jain <gaurav.jain@nxp.com> + +description: + Node defines address range and the associated interrupt for the SNVS function. + This function monitors security state information & reports security + violations. This also included rtc, system power off and ON/OFF key. + +properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v4.0-mon + - const: syscon + - const: simple-mfd + - items: + - const: fsl,sec-v5.0-mon + - const: fsl,sec-v4.0-mon + - items: + - enum: + - fsl,sec-v5.3-mon + - fsl,sec-v5.4-mon + - const: fsl,sec-v5.0-mon + - const: fsl,sec-v4.0-mon + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + snvs-rtc-lp: + type: object + additionalProperties: false + description: + Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node + + properties: + compatible: + const: fsl,sec-v4.0-mon-rtc-lp + + clocks: + maxItems: 1 + + clock-names: + const: snvs-rtc + + interrupts: + # VFxxx has only one. What is the 2nd one? + minItems: 1 + maxItems: 2 + + regmap: + description: Parent node containing registers + $ref: /schemas/types.yaml#/definitions/phandle + + offset: + description: LP register offset + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x34 + + required: + - compatible + - interrupts + - regmap + + snvs-powerkey: + type: object + additionalProperties: false + description: + The snvs-pwrkey is designed to enable POWER key function which controlled + by SNVS ONOFF, the driver can report the status of POWER key and wakeup + system if pressed after system suspend. + + properties: + compatible: + const: fsl,sec-v4.0-pwrkey + + clocks: + maxItems: 1 + + clock-names: + const: snvs-pwrkey + + interrupts: + maxItems: 1 + + regmap: + description: Parent node containing registers + $ref: /schemas/types.yaml#/definitions/phandle + + wakeup-source: true + + linux,keycode: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 116 + deprecated: true + + linux,keycodes: + maxItems: 1 + default: 116 + + required: + - compatible + - interrupts + - regmap + + snvs-lpgpr: + $ref: /schemas/nvmem/snvs-lpgpr.yaml# + + snvs-poweroff: + description: + The SNVS could drive signal to PMIC to turn off system power by setting + SNVS_LP LPCR register. + $ref: /schemas/power/reset/syscon-poweroff.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx7d-clock.h> + + sec_mon: sec-mon@314000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x314000 0x1000>; + + snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&sec_mon>; + offset = <0x34>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-rtc"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&sec_mon>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <116>; /* KEY_POWER */ + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml new file mode 100644 index 0000000000..0a9ed2848b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml @@ -0,0 +1,266 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2008-2011 Freescale Semiconductor Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SEC 4 + +maintainers: + - '"Horia Geantă" <horia.geanta@nxp.com>' + - Pankaj Gupta <pankaj.gupta@nxp.com> + - Gaurav Jain <gaurav.jain@nxp.com> + +description: | + NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator + Accelerator and Assurance Module (CAAM). + + SEC 4 h/w can process requests from 2 types of sources. + 1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4). + 2. Job Rings (HW interface between cores & SEC 4 registers). + + High Speed Data Path Configuration: + + HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts + such as the P4080. The number of simultaneous dequeues the QI can make is + equal to the number of Descriptor Controller (DECO) engines in a particular + SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus + dequeue from 5 subportals simultaneously. + + Job Ring Data Path Configuration: + + Each JR is located on a separate 4k page, they may (or may not) be made visible + in the memory partition devoted to a particular core. The P4080 has 4 JRs, so + up to 4 JRs can be configured; and all 4 JRs process requests in parallel. + +properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4 + - const: fsl,sec-v5.0 + - const: fsl,sec-v4.0 + - items: + - enum: + - fsl,imx6ul-caam + - fsl,sec-v5.0 + - const: fsl,sec-v4.0 + - const: fsl,sec-v4.0 + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + '#address-cells': + enum: [1, 2] + + '#size-cells': + enum: [1, 2] + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: [mem, aclk, ipg, emi_slow] + + dma-coherent: true + + interrupts: + maxItems: 1 + + fsl,sec-era: + description: Defines the 'ERA' of the SEC device. + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '^jr@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Job Ring (JR) Node. Defines data processing interface to SEC 4 across the + peripheral bus for purposes of processing cryptographic descriptors. The + specified address range can be made visible to one (or more) cores. The + interrupt defined for this node is controlled within the address range of + this node. + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-job-ring + - const: fsl,sec-v5.0-job-ring + - const: fsl,sec-v4.0-job-ring + - items: + - const: fsl,sec-v5.0-job-ring + - const: fsl,sec-v4.0-job-ring + - const: fsl,sec-v4.0-job-ring + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,liodn: + description: + Specifies the LIODN to be used in conjunction with the ppid-to-liodn + table that specifies the PPID to LIODN mapping. Needed if the PAMU is + used. Value is a 12 bit value where value is a LIODN ID for this JR. + This property is normally set by boot firmware. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xfff + + '^rtic@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Run Time Integrity Check (RTIC) Node. Defines a register space that + contains up to 5 sets of addresses and their lengths (sizes) that will be + checked at run time. After an initial hash result is calculated, these + addresses are checked by HW to monitor any change. If any memory is + modified, a Security Violation is triggered (see SNVS definition). + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-rtic + - const: fsl,sec-v5.0-rtic + - const: fsl,sec-v4.0-rtic + - const: fsl,sec-v4.0-rtic + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + patternProperties: + '^rtic-[a-z]@[0-9a-f]+$': + type: object + additionalProperties: false + description: + Run Time Integrity Check (RTIC) Memory Node defines individual RTIC + memory regions that are used to perform run-time integrity check of + memory areas that should not modified. The node defines a register + that contains the memory address & length (combined) and a second + register that contains the hash result in big endian format. + + properties: + compatible: + oneOf: + - items: + - const: fsl,sec-v5.4-rtic-memory + - const: fsl,sec-v5.0-rtic-memory + - const: fsl,sec-v4.0-rtic-memory + - const: fsl,sec-v4.0-rtic-memory + + reg: + items: + - description: RTIC memory address + - description: RTIC hash result + + fsl,liodn: + description: + Specifies the LIODN to be used in conjunction with the + ppid-to-liodn table that specifies the PPID to LIODN mapping. + Needed if the PAMU is used. Value is a 12 bit value where value + is a LIODN ID for this JR. This property is normally set by boot + firmware. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0xfff + + fsl,rtic-region: + description: + Specifies the HW address (36 bit address) for this region + followed by the length of the HW partition to be checked; + the address is represented as a 64 bit quantity followed + by a 32 bit length. + $ref: /schemas/types.yaml#/definitions/uint32-array + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + crypto@300000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2>; + + jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2>; + }; + + jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2>; + }; + + jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2>; + }; + + jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20>, <0x100 0x80>; + }; + + rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20>, <0x200 0x80>; + }; + + rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20>, <0x300 0x80>; + }; + + rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20>, <0x500 0x80>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml new file mode 100644 index 0000000000..8dd36c2f76 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-dcp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale DCP (Data Co-Processor) found on i.MX23/i.MX28 + +maintainers: + - Marek Vasut <marex@denx.de> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-dcp + - fsl,imx28-dcp + - items: + - enum: + - fsl,imx6sl-dcp + - fsl,imx6ull-dcp + - const: fsl,imx28-dcp + + reg: + maxItems: 1 + + interrupts: + description: Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ + must be supplied, optionally Secure IRQ can be present, but is currently + not implemented and not used. + items: + - description: MXS DCP VMI interrupt + - description: MXS DCP DCP interrupt + - description: MXS DCP secure interrupt + minItems: 2 + + clocks: + maxItems: 1 + + clock-names: + const: dcp + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + crypto@80028000 { + compatible = "fsl,imx23-dcp"; + reg = <0x80028000 0x2000>; + interrupts = <53>, <54>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml new file mode 100644 index 0000000000..d531f3af3e --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-sahara.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale SAHARA Cryptographic Accelerator included in some i.MX chips + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +properties: + compatible: + enum: + - fsl,imx27-sahara + - fsl,imx53-sahara + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + crypto@10025000 { + compatible = "fsl,imx27-sahara"; + reg = < 0x10025000 0x800>; + interrupts = <75>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml new file mode 100644 index 0000000000..563a31605d --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-imx-scc.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/fsl-imx-scc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Security Controller (SCC) + +maintainers: + - Steffen Trumtrar <s.trumtrar@pengutronix.de> + +properties: + compatible: + const: fsl,imx25-scc + + reg: + maxItems: 1 + + interrupts: + items: + - description: SCC SCM interrupt + - description: SCC SMN interrupt + + interrupt-names: + items: + - const: scm + - const: smn + + clocks: + maxItems: 1 + + clock-names: + const: ipg + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + crypto@53fac000 { + compatible = "fsl,imx25-scc"; + reg = <0x53fac000 0x4000>; + clocks = <&clks 111>; + clock-names = "ipg"; + interrupts = <49>, <50>; + interrupt-names = "scm", "smn"; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt new file mode 100644 index 0000000000..125f155d00 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-sec2.txt @@ -0,0 +1,65 @@ +Freescale SoC SEC Security Engines versions 1.x-2.x-3.x + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" (SEC2/3) + e.g., "fsl,sec1.2", "fsl,sec1.0" (SEC1) + warning: SEC1 and SEC2 are mutually exclusive +- reg : Offset and length of the register set for the device +- interrupts : the SEC's interrupt number +- fsl,num-channels : An integer representing the number of channels + available. +- fsl,channel-fifo-len : An integer representing the number of + descriptor pointers each channel fetch fifo can hold. +- fsl,exec-units-mask : The bitmask representing what execution units + (EUs) are available. It's a single 32-bit cell. EU information + should be encoded following the SEC's Descriptor Header Dword + EU_SEL0 field documentation, i.e. as follows: + + bit 0 = reserved - should be 0 + bit 1 = set if SEC has the ARC4 EU (AFEU) + bit 2 = set if SEC has the DES/3DES EU (DEU) + bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A) + bit 4 = set if SEC has the random number generator EU (RNG) + bit 5 = set if SEC has the public key EU (PKEU) + bit 6 = set if SEC has the AES EU (AESU) + bit 7 = set if SEC has the Kasumi EU (KEU) + bit 8 = set if SEC has the CRC EU (CRCU) + bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B) + +remaining bits are reserved for future SEC EUs. + +- fsl,descriptor-types-mask : The bitmask representing what descriptors + are available. It's a single 32-bit cell. Descriptor type information + should be encoded following the SEC's Descriptor Header Dword DESC_TYPE + field documentation, i.e. as follows: + + bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type + bit 1 = set if SEC supports the ipsec_esp descriptor type + bit 2 = set if SEC supports the common_nonsnoop desc. type + bit 3 = set if SEC supports the 802.11i AES ccmp desc. type + bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type + bit 5 = set if SEC supports the srtp descriptor type + bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type + bit 7 = set if SEC supports the pkeu_assemble descriptor type + bit 8 = set if SEC supports the aesu_key_expand_output desc.type + bit 9 = set if SEC supports the pkeu_ptmul descriptor type + bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type + bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type + + ..and so on and so forth. + +Example: + + /* MPC8548E */ + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <29 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt new file mode 100644 index 0000000000..73b0eb950b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -0,0 +1,157 @@ +SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). +Currently Freescale powerpc chip C29X is embedded with SEC 6. +SEC 6 device tree binding include: + -SEC 6 Node + -Job Ring Node + -Full Example + +===================================================================== +SEC 6 Node + +Description + + Node defines the base address of the SEC 6 block. + This block specifies the address range of all global + configuration registers for the SEC 6 block. + For example, In C293, we could see three SEC 6 node. + +PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,sec-v6.0". + + - fsl,sec-era + Usage: optional + Value type: <u32> + Definition: A standard property. Define the 'ERA' of the SEC + device. + + - #address-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. + + - #size-cells + Usage: required + Value type: <u32> + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical + address and length of the SEC 6 configuration registers. + + - ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the physical address + range of the SEC 6.0 register space (-SNVS not included). A + triplet that includes the child address, parent address, & + length. + + Note: All other standard properties (see the Devicetree Specification) + are allowed but are optional. + +EXAMPLE + crypto@a0000 { + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + }; + +===================================================================== +Job Ring (JR) Node + + Child of the crypto node defines data processing interface to SEC 6 + across the peripheral bus for purposes of processing + cryptographic descriptors. The specified address + range can be made visible to one (or more) cores. + The interrupt defined for this node is controlled within + the address range of this node. + + - compatible + Usage: required + Value type: <string> + Definition: Must include "fsl,sec-v6.0-job-ring". + + - reg + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies a two JR parameters: an offset from + the parent physical address and the length the JR registers. + + - interrupts + Usage: required + Value type: <prop_encoded-array> + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + +EXAMPLE + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <49 2 0 0>; + }; + +=================================================================== +Full Example + +Since some chips may contain more than one SEC, the dtsi contains +only the node contents, not the node itself. A chip using the SEC +should include the dtsi inside each SEC node. Example: + +In qoriq-sec6.0.dtsi: + + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; + +In the C293 device tree, we add the include of public property: + + crypto@a0000 { + /include/ "qoriq-sec6.0.dtsi" + } + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + + jr@1000 { + interrupts = <49 2 0 0>; + }; + + jr@2000 { + interrupts = <50 2 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt new file mode 100644 index 0000000000..d28fd1af01 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/hisilicon,hip07-sec.txt @@ -0,0 +1,67 @@ +* Hisilicon hip07 Security Accelerator (SEC) + +Required properties: +- compatible: Must contain one of + - "hisilicon,hip06-sec" + - "hisilicon,hip07-sec" +- reg: Memory addresses and lengths of the memory regions through which + this device is controlled. + Region 0 has registers to control the backend processing engines. + Region 1 has registers for functionality common to all queues. + Regions 2-18 have registers for the 16 individual queues which are isolated + both in hardware and within the driver. +- interrupts: Interrupt specifiers. + Refer to interrupt-controller/interrupts.txt for generic interrupt client node + bindings. + Interrupt 0 is for the SEC unit error queue. + Interrupt 2N + 1 is the completion interrupt for queue N. + Interrupt 2N + 2 is the error interrupt for queue N. +- dma-coherent: The driver assumes coherent dma is possible. + +Optional properties: +- iommus: The SEC units are behind smmu-v3 iommus. + Refer to iommu/arm,smmu-v3.txt for more information. + +Example: + +p1_sec_a: crypto@400d2000000 { + compatible = "hisilicon,hip07-sec"; + reg = <0x400 0xd0000000 0x0 0x10000 + 0x400 0xd2000000 0x0 0x10000 + 0x400 0xd2010000 0x0 0x10000 + 0x400 0xd2020000 0x0 0x10000 + 0x400 0xd2030000 0x0 0x10000 + 0x400 0xd2040000 0x0 0x10000 + 0x400 0xd2050000 0x0 0x10000 + 0x400 0xd2060000 0x0 0x10000 + 0x400 0xd2070000 0x0 0x10000 + 0x400 0xd2080000 0x0 0x10000 + 0x400 0xd2090000 0x0 0x10000 + 0x400 0xd20a0000 0x0 0x10000 + 0x400 0xd20b0000 0x0 0x10000 + 0x400 0xd20c0000 0x0 0x10000 + 0x400 0xd20d0000 0x0 0x10000 + 0x400 0xd20e0000 0x0 0x10000 + 0x400 0xd20f0000 0x0 0x10000 + 0x400 0xd2100000 0x0 0x10000>; + interrupt-parent = <&p1_mbigen_sec_a>; + iommus = <&p1_smmu_alg_a 0x600>; + dma-coherent; + interrupts = <576 4>, + <577 1>, <578 4>, + <579 1>, <580 4>, + <581 1>, <582 4>, + <583 1>, <584 4>, + <585 1>, <586 4>, + <587 1>, <588 4>, + <589 1>, <590 4>, + <591 1>, <592 4>, + <593 1>, <594 4>, + <595 1>, <596 4>, + <597 1>, <598 4>, + <599 1>, <600 4>, + <601 1>, <602 4>, + <603 1>, <604 4>, + <605 1>, <606 4>, + <607 1>, <608 4>; +}; diff --git a/Documentation/devicetree/bindings/crypto/img-hash.txt b/Documentation/devicetree/bindings/crypto/img-hash.txt new file mode 100644 index 0000000000..91a3d757d6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/img-hash.txt @@ -0,0 +1,27 @@ +Imagination Technologies hardware hash accelerator + +The hash accelerator provides hardware hashing acceleration for +SHA1, SHA224, SHA256 and MD5 hashes + +Required properties: + +- compatible : "img,hash-accelerator" +- reg : Offset and length of the register set for the module, and the DMA port +- interrupts : The designated IRQ line for the hashing module. +- dmas : DMA specifier as per Documentation/devicetree/bindings/dma/dma.txt +- dma-names : Should be "tx" +- clocks : Clock specifiers +- clock-names : "sys" Used to clock the hash block registers + "hash" Used to clock data through the accelerator + +Example: + + hash: hash@18149600 { + compatible = "img,hash-accelerator"; + reg = <0x18149600 0x100>, <0x18101100 0x4>; + interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 8 0xffffffff 0>; + dma-names = "tx"; + clocks = <&cr_periph SYS_CLK_HASH>, <&clk_periph PERIPH_CLK_ROM>; + clock-names = "sys", "hash"; + }; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt new file mode 100644 index 0000000000..3bbf144c99 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -0,0 +1,40 @@ +Inside Secure SafeXcel cryptographic engine + +Required properties: +- compatible: Should be "inside-secure,safexcel-eip197b", + "inside-secure,safexcel-eip197d" or + "inside-secure,safexcel-eip97ies". +- reg: Base physical address of the engine and length of memory mapped region. +- interrupts: Interrupt numbers for the rings and engine. +- interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem". + +Optional properties: +- clocks: Reference to the crypto engine clocks, the second clock is + needed for the Armada 7K/8K SoCs. +- clock-names: mandatory if there is a second clock, in this case the + name must be "core" for the first clock and "reg" for + the second one. + +Backward compatibility: +Two compatibles are kept for backward compatibility, but shouldn't be used for +new submissions: +- "inside-secure,safexcel-eip197" is equivalent to + "inside-secure,safexcel-eip197b". +- "inside-secure,safexcel-eip97" is equivalent to + "inside-secure,safexcel-eip97ies". + +Example: + + crypto: crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", + "eip"; + clocks = <&cpm_syscon0 1 26>; + }; diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml new file mode 100644 index 0000000000..a4006237aa --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2018 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,ixp4xx-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx cryptographic engine + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE + (Network Processing Engine). Since it is not a device on its own + it is defined as a subnode of the NPE, if crypto support is + available on the platform. + +properties: + compatible: + const: intel,ixp4xx-crypto + + intel,npe-handle: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the NPE this crypto engine + - description: the NPE instance number + description: phandle to the NPE this crypto engine is using, the cell + describing the NPE instance to be used. + + queue-rx: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number + description: phandle to the RX queue on the NPE, the cell describing + the queue instance to be used. + + queue-txready: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the TX READY queue on the NPE + - description: the queue instance number + description: phandle to the TX READY queue on the NPE, the cell describing + the queue instance to be used. + +required: + - compatible + - intel,npe-handle + - queue-rx + - queue-txready + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml new file mode 100644 index 0000000000..fedd8be56a --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay OCS AES + +maintainers: + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + The Intel Keem Bay Offload and Crypto Subsystem (OCS) AES engine provides + hardware-accelerated AES/SM4 encryption/decryption. + +properties: + compatible: + const: intel,keembay-ocs-aes + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + crypto@30008000 { + compatible = "intel,keembay-ocs-aes"; + reg = <0x30008000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 95>; + }; diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml new file mode 100644 index 0000000000..2bb95247b6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay OCS ECC + +maintainers: + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + - Prabhjot Khurana <prabhjot.khurana@intel.com> + +description: + The Intel Keem Bay Offload and Crypto Subsystem (OCS) Elliptic Curve + Cryptography (ECC) device provides hardware acceleration for elliptic curve + cryptography using the NIST P-256 and NIST P-384 elliptic curves. + +properties: + compatible: + const: intel,keembay-ocs-ecc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + crypto@30001000 { + compatible = "intel,keembay-ocs-ecc"; + reg = <0x30001000 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 95>; + }; diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml new file mode 100644 index 0000000000..46e2853ab8 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay OCS HCU + +maintainers: + - Declan Murphy <declan.murphy@intel.com> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + The Intel Keem Bay Offload and Crypto Subsystem (OCS) Hash Control Unit (HCU) + provides hardware-accelerated hashing and HMAC. + +properties: + compatible: + const: intel,keembay-ocs-hcu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + crypto@3000b000 { + compatible = "intel,keembay-ocs-hcu"; + reg = <0x3000b000 0x1000>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scmi_clk 94>; + }; diff --git a/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt new file mode 100644 index 0000000000..28d3f2496b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/marvell-cesa.txt @@ -0,0 +1,44 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible: should be one of the following string + "marvell,orion-crypto" + "marvell,kirkwood-crypto" + "marvell,dove-crypto" + "marvell,armada-370-crypto" + "marvell,armada-xp-crypto" + "marvell,armada-375-crypto" + "marvell,armada-38x-crypto" +- reg: base physical address of the engine and length of memory mapped + region. Can also contain an entry for the SRAM attached to the CESA, + but this representation is deprecated and marvell,crypto-srams should + be used instead +- reg-names: "regs". Can contain an "sram" entry, but this representation + is deprecated and marvell,crypto-srams should be used instead +- interrupts: interrupt number +- clocks: reference to the crypto engines clocks. This property is not + required for orion and kirkwood platforms +- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine + id. + This property is not required for the orion and kirkwoord + platforms. + "cesazX" clocks are not required on armada-370 platforms +- marvell,crypto-srams: phandle to crypto SRAM definitions + +Optional properties: +- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not + specified the whole SRAM is used (2KB) + + +Examples: + + crypto@90000 { + compatible = "marvell,armada-xp-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>, <49>; + clocks = <&gateclk 23>, <&gateclk 23>; + clock-names = "cesa0", "cesa1"; + marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; + marvell,crypto-sram-size = <0x600>; + }; diff --git a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt new file mode 100644 index 0000000000..450da3661c --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt @@ -0,0 +1,25 @@ +MediaTek cryptographic accelerators + +Required properties: +- compatible: Should be "mediatek,eip97-crypto" +- reg: Address and length of the register set for the device +- interrupts: Should contain the five crypto engines interrupts in numeric + order. These are global system and four descriptor rings. +- clocks: the clock used by the core +- clock-names: Must contain "cryp". +- power-domains: Must contain a reference to the PM domain. + + +Example: + crypto: crypto@1b240000 { + compatible = "mediatek,eip97-crypto"; + reg = <0 0x1b240000 0 0x20000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETHSYS_CRYPTO>; + clock-names = "cryp"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + }; diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt new file mode 100644 index 0000000000..d9b92e2f31 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -0,0 +1,32 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible: should be one of the following string + "marvell,orion-crypto" + "marvell,kirkwood-crypto" + "marvell,dove-crypto" +- reg: base physical address of the engine and length of memory mapped + region. Can also contain an entry for the SRAM attached to the CESA, + but this representation is deprecated and marvell,crypto-srams should + be used instead +- reg-names: "regs". Can contain an "sram" entry, but this representation + is deprecated and marvell,crypto-srams should be used instead +- interrupts: interrupt number +- clocks: reference to the crypto engines clocks. This property is only + required for Dove platforms +- marvell,crypto-srams: phandle to crypto SRAM definitions + +Optional properties: +- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not + specified the whole SRAM is used (2KB) + +Examples: + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>; + reg-names = "regs"; + interrupts = <22>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x600>; + }; diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt new file mode 100644 index 0000000000..fd9717653c --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt @@ -0,0 +1,31 @@ +OMAP SoC AES crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + AES versions: + - "ti,omap2-aes" for OMAP2. + - "ti,omap3-aes" for OMAP3. + - "ti,omap4-aes" for OMAP4 and AM33XX. + Note that the OMAP2 and 3 versions are compatible (OMAP3 supports + more algorithms) but they are incompatible with OMAP4. +- ti,hwmods: Name of the hwmod associated with the AES module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the AES module. + +Optional properties: +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. + +Example: + /* AM335x */ + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <102>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/omap-des.txt b/Documentation/devicetree/bindings/crypto/omap-des.txt new file mode 100644 index 0000000000..e8c63bf2e1 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-des.txt @@ -0,0 +1,30 @@ +OMAP SoC DES crypto Module + +Required properties: + +- compatible : Should contain "ti,omap4-des" +- ti,hwmods: Name of the hwmod associated with the DES module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the DES module +- clocks : A phandle to the functional clock node of the DES module + corresponding to each entry in clock-names +- clock-names : Name of the functional clock, should be "fck" + +Optional properties: +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt + Each entry corresponds to an entry in dma-names +- dma-names: DMA request names should include "tx" and "rx" if present + +Example: + /* DRA7xx SoC */ + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt new file mode 100644 index 0000000000..ad91155696 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt @@ -0,0 +1,28 @@ +OMAP SoC SHA crypto Module + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SHAM versions: + - "ti,omap2-sham" for OMAP2 & OMAP3. + - "ti,omap4-sham" for OMAP4 and AM33XX. + - "ti,omap5-sham" for OMAP5, DRA7 and AM43XX. +- ti,hwmods: Name of the hwmod associated with the SHAM module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the SHAM module. + +Optional properties: +- dmas: DMA specifiers for the rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request name. Should be "rx" if a dma is present. + +Example: + /* AM335x */ + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml new file mode 100644 index 0000000000..7da9aa82d8 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + items: + - enum: + - qcom,sm8450-inline-crypto-engine + - qcom,sm8550-inline-crypto-engine + - const: qcom,inline-crypto-engine + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + + crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x01d88000 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml new file mode 100644 index 0000000000..bb42f4588b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Pseudo Random Number Generator + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + enum: + - qcom,prng # 8916 etc. + - qcom,prng-ee # 8996 and later using EE + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&clk 125>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml new file mode 100644 index 0000000000..8e665d910e --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm crypto engine driver + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: + This document defines the binding for the QCE crypto + controller found on Qualcomm parts. + +properties: + compatible: + oneOf: + - const: qcom,crypto-v5.1 + deprecated: true + description: Kept only for ABI backward compatibility + + - const: qcom,crypto-v5.4 + deprecated: true + description: Kept only for ABI backward compatibility + + - items: + - enum: + - qcom,ipq4019-qce + - qcom,sm8150-qce + - const: qcom,qce + + - items: + - enum: + - qcom,ipq6018-qce + - qcom,ipq8074-qce + - qcom,ipq9574-qce + - qcom,msm8996-qce + - qcom,qcm2290-qce + - qcom,sdm845-qce + - qcom,sm6115-qce + - const: qcom,ipq4019-qce + - const: qcom,qce + + - items: + - enum: + - qcom,sm8250-qce + - qcom,sm8350-qce + - qcom,sm8450-qce + - qcom,sm8550-qce + - const: qcom,sm8150-qce + - const: qcom,qce + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 + + iommus: + minItems: 1 + maxItems: 8 + description: + phandle to apps_smmu node with sid mask. + + interconnects: + maxItems: 1 + description: + Interconnect path between qce crypto and main memory. + + interconnect-names: + const: memory + + dmas: + items: + - description: DMA specifiers for rx dma channel. + - description: DMA specifiers for tx dma channel. + + dma-names: + items: + - const: rx + - const: tx + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,crypto-v5.1 + - qcom,crypto-v5.4 + - qcom,ipq6018-qce + - qcom,ipq8074-qce + - qcom,msm8996-qce + - qcom,sdm845-qce + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: iface + - const: bus + - const: core + required: + - clocks + - clock-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-qce + - qcom,sm6115-qce + then: + properties: + clocks: + maxItems: 1 + clock-names: + items: + - const: core + required: + - clocks + - clock-names + +required: + - compatible + - reg + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-apq8084.h> + crypto-engine@fd45a000 { + compatible = "qcom,ipq6018-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0xfd45a000 0x6000>; + clocks = <&gcc GCC_CE2_AHB_CLK>, + <&gcc GCC_CE2_AXI_CLK>, + <&gcc GCC_CE2_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x584 0x0011>, + <&apps_smmu 0x586 0x0011>, + <&apps_smmu 0x594 0x0011>, + <&apps_smmu 0x596 0x0011>; + }; diff --git a/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml new file mode 100644 index 0000000000..f1a9da8bff --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/rockchip,rk3288-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip Electronics Security Accelerator + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,rk3288-crypto + - rockchip,rk3328-crypto + - rockchip,rk3399-crypto + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 4 + + clock-names: + minItems: 3 + maxItems: 4 + + resets: + minItems: 1 + maxItems: 3 + + reset-names: + minItems: 1 + maxItems: 3 + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-crypto + then: + properties: + clocks: + minItems: 4 + clock-names: + items: + - const: aclk + - const: hclk + - const: sclk + - const: apb_pclk + resets: + maxItems: 1 + reset-names: + items: + - const: crypto-rst + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-crypto + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: hclk_master + - const: hclk_slave + - const: sclk + resets: + maxItems: 1 + reset-names: + items: + - const: crypto-rst + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-crypto + then: + properties: + clocks: + maxItems: 3 + clock-names: + items: + - const: hclk_master + - const: hclk_slave + - const: sclk + resets: + minItems: 3 + reset-names: + items: + - const: master + - const: slave + - const: crypto-rst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/rk3288-cru.h> + crypto@ff8a0000 { + compatible = "rockchip,rk3288-crypto"; + reg = <0xff8a0000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>, + <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>; + clock-names = "aclk", "hclk", "sclk", "apb_pclk"; + resets = <&cru SRST_CRYPTO>; + reset-names = "crypto-rst"; + }; diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml new file mode 100644 index 0000000000..5b31891c97 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/samsung-slimsss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC SlimSSS (Slim Security SubSystem) module + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: |+ + The SlimSSS module in Exynos5433 SoC supports the following: + -- Feeder (FeedCtrl) + -- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS + -- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC + +properties: + compatible: + items: + - const: samsung,exynos5433-slim-sss + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: aclk + + interrupts: + description: One feed control interrupt. + maxItems: 1 + +required: + - compatible + - reg + - clock-names + - clocks + - interrupts + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.yaml b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml new file mode 100644 index 0000000000..6d62b0e42f --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/samsung-sss.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/samsung-sss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC SSS (Security SubSystem) module + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: |+ + The SSS module in S5PV210 SoC supports the following: + -- Feeder (FeedCtrl) + -- Advanced Encryption Standard (AES) + -- Data Encryption Standard (DES)/3DES + -- Public Key Accelerator (PKA) + -- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG + -- PRNG: Pseudo Random Number Generator + + The SSS module in Exynos4 (Exynos4210) and Exynos5 (Exynos5420 and Exynos5250) + SoCs supports the following also: + -- ARCFOUR (ARC4) + -- True Random Number Generator (TRNG) + -- Secure Key Manager + +properties: + compatible: + items: + - enum: + - samsung,s5pv210-secss # for S5PV210 + - samsung,exynos4210-secss # for Exynos4210, Exynos4212, + # Exynos4412, Exynos5250, + # Exynos5260 and Exynos5420 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: secss + + interrupts: + description: One feed control interrupt. + maxItems: 1 + +required: + - compatible + - reg + - clock-names + - clocks + - interrupts + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml new file mode 100644 index 0000000000..50b2c2e0c3 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 CRC + +maintainers: + - Lionel Debieve <lionel.debieve@foss.st.com> + +properties: + compatible: + const: st,stm32f7-crc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/stm32mp1-clks.h> + crc@40023000 { + compatible = "st,stm32f7-crc"; + reg = <0x40023000 0x400>; + clocks = <&rcc 0 12>; + }; + +... diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml new file mode 100644 index 0000000000..0ddeb8a9a7 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 CRYP + +description: The STM32 CRYP block is built on the CRYP block found in + the STn8820 SoC introduced in 2007, and subsequently used in the U8500 + SoC in 2010. + +maintainers: + - Lionel Debieve <lionel.debieve@foss.st.com> + +properties: + compatible: + enum: + - st,stn8820-cryp + - stericsson,ux500-cryp + - st,stm32f756-cryp + - st,stm32mp1-cryp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + items: + - description: mem2cryp DMA channel + - description: cryp2mem DMA channel + + dma-names: + items: + - const: mem2cryp + - const: cryp2mem + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + }; + +... diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml new file mode 100644 index 0000000000..ac480765cd --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 HASH + +description: The STM32 HASH block is built on the HASH block found in + the STn8820 SoC introduced in 2007, and subsequently used in the U8500 + SoC in 2010. + +maintainers: + - Lionel Debieve <lionel.debieve@foss.st.com> + +properties: + compatible: + enum: + - st,stn8820-hash + - stericsson,ux500-hash + - st,stm32f456-hash + - st,stm32f756-hash + - st,stm32mp13-hash + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: in + + dma-maxburst: + description: Set number of maximum dma burst supported + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +allOf: + - if: + properties: + compatible: + items: + const: stericsson,ux500-hash + then: + properties: + interrupts: false + else: + required: + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + hash@54002000 { + compatible = "st,stm32f756-hash"; + reg = <0x54002000 0x400>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc HASH1>; + resets = <&rcc HASH1_R>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>; + dma-names = "in"; + dma-maxburst = <2>; + }; + +... diff --git a/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml new file mode 100644 index 0000000000..71a2876bd6 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/starfive,jh7110-crypto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive Cryptographic Module + +maintainers: + - Jia Jie Ho <jiajie.ho@starfivetech.com> + - William Qiu <william.qiu@starfivetech.com> + +properties: + compatible: + const: starfive,jh7110-crypto + + reg: + maxItems: 1 + + clocks: + items: + - description: Hardware reference clock + - description: AHB reference clock + + clock-names: + items: + - const: hclk + - const: ahb + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + items: + - description: TX DMA channel + - description: RX DMA channel + + dma-names: + items: + - const: tx + - const: rx + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + crypto: crypto@16000000 { + compatible = "starfive,jh7110-crypto"; + reg = <0x16000000 0x4000>; + clocks = <&clk 15>, <&clk 16>; + clock-names = "hclk", "ahb"; + interrupts = <28>; + resets = <&reset 3>; + dmas = <&dma 1 2>, + <&dma 0 2>; + dma-names = "tx", "rx"; + }; +... diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml new file mode 100644 index 0000000000..ff10a0838a --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/ti,sa2ul.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: K3 SoC SA2UL crypto module + +maintainers: + - Tero Kristo <t-kristo@ti.com> + +properties: + compatible: + enum: + - ti,j721e-sa2ul + - ti,am654-sa2ul + - ti,am64-sa2ul + - ti,am62-sa3ul + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: 'RX DMA Channel #1' + - description: 'RX DMA Channel #2' + + dma-names: + items: + - const: tx + - const: rx1 + - const: rx2 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: + description: + Address translation for the possible RNG child node for SA2UL + + clocks: + items: + - description: Clock used by PKA + - description: Main Input Clock + - description: Clock used by rng + + clock-names: + items: + - const: pka_in_clk + - const: x1_clk + - const: x2_clk + +patternProperties: + "^rng@[a-f0-9]+$": + type: object + description: + Child RNG node for SA2UL + +required: + - compatible + - reg + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + contains: + const: ti,am62-sa3ul + then: + properties: + power-domains: false + else: + required: + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + main_crypto: crypto@4e00000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x4e00000 0x1200>; + power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>; + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, + <&main_udmap 0x4001>; + dma-names = "tx", "rx1", "rx2"; + }; diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml new file mode 100644 index 0000000000..8aead97a58 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP AES-GCM Hardware Accelerator + +maintainers: + - Kalyani Akula <kalyani.akula@amd.com> + - Michal Simek <michal.simek@amd.com> + +description: | + The ZynqMP AES-GCM hardened cryptographic accelerator is used to + encrypt or decrypt the data with provided key and initialization vector. + +properties: + compatible: + const: xlnx,zynqmp-aes + +required: + - compatible + +additionalProperties: false + +examples: + - | + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + xlnx_aes: zynqmp-aes { + compatible = "xlnx,zynqmp-aes"; + }; + }; + }; +... |