Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 127 insertions, 159 deletions

diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 83e77ee489..d54140f18d 100644
--- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -21,8 +21,8 @@ properties:
       - enum:
           - fsl,vf610-edma
           - fsl,imx7ulp-edma
-          - fsl,imx8qm-adma
           - fsl,imx8qm-edma
+          - fsl,imx8ulp-edma
           - fsl,imx93-edma3
           - fsl,imx93-edma4
           - fsl,imx95-edma5
@@ -43,6 +43,17 @@ properties:
     maxItems: 64
 
   "#dma-cells":
+    description: |
+      Specifies the number of cells needed to encode an DMA channel.
+
+      Encode for cells number 2:
+        cell 0: index of dma channel mux instance.
+        cell 1: peripheral dma request id.
+
+      Encode for cells number 3:
+        cell 0: peripheral dma request id.
+        cell 1: dma channel priority.
+        cell 2: bitmask, defined at include/dt-bindings/dma/fsl-edma.h
     enum:
       - 2
       - 3
@@ -53,11 +64,18 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 33
 
   clock-names:
     minItems: 1
-    maxItems: 2
+    maxItems: 33
+
+  power-domains:
+    description:
+      The number of power domains matches the number of channels, arranged
+      in ascending order according to their associated DMA channels.
+    minItems: 1
+    maxItems: 64
 
   big-endian:
     description: |
@@ -70,7 +88,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
   - dma-channels
 
 allOf:
@@ -80,7 +97,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - fsl,imx8qm-adma
               - fsl,imx8qm-edma
               - fsl,imx93-edma3
               - fsl,imx93-edma4
@@ -108,6 +124,7 @@ allOf:
       properties:
         clocks:
           minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: dmamux0
@@ -136,6 +153,7 @@ allOf:
       properties:
         clock:
           minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: dma
@@ -151,6 +169,58 @@ allOf:
         dma-channels:
           const: 32
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8ulp-edma
+    then:
+      properties:
+        clocks:
+          minItems: 33
+        clock-names:
+          minItems: 33
+          items:
+            oneOf:
+              - const: dma
+              - pattern: "^ch(0[0-9]|[1-2][0-9]|3[01])$"
+
+        interrupt-names: false
+        interrupts:
+          minItems: 32
+        "#dma-cells":
+          const: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,vf610-edma
+              - fsl,imx7ulp-edma
+              - fsl,imx93-edma3
+              - fsl,imx93-edma4
+              - fsl,imx95-edma5
+              - fsl,imx8ulp-edma
+              - fsl,ls1028a-edma
+    then:
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-adma
+              - fsl,imx8qm-edma
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 unevaluatedProperties: false
 
 examples:
@@ -206,44 +276,27 @@ examples:
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
 
-    dma-controller@44000000 {
-      compatible = "fsl,imx93-edma3";
-      reg = <0x44000000 0x200000>;
+    dma-controller@5a9f0000 {
+      compatible = "fsl,imx8qm-edma";
+      reg = <0x5a9f0000 0x90000>;
       #dma-cells = <3>;
-      dma-channels = <31>;
-      interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clk IMX93_CLK_EDMA1_GATE>;
-        clock-names = "dma";
+      dma-channels = <8>;
+      interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+      power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+                      <&pd IMX_SC_R_DMA_3_CH1>,
+                      <&pd IMX_SC_R_DMA_3_CH2>,
+                      <&pd IMX_SC_R_DMA_3_CH3>,
+                      <&pd IMX_SC_R_DMA_3_CH4>,
+                      <&pd IMX_SC_R_DMA_3_CH5>,
+                      <&pd IMX_SC_R_DMA_3_CH6>,
+                      <&pd IMX_SC_R_DMA_3_CH7>;
     };
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
index 37135fa024..738b25b88b 100644
--- a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -94,6 +94,7 @@ properties:
           - SAI: 24
           - Multi SAI: 25
           - HDMI Audio: 26
+          - I2C: 27
 
        The third cell: transfer priority ID
          enum:
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
deleted file mode 100644
index 1ae4748730..0000000000
--- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Qualcomm Technologies HIDMA Management interface
-
-Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
-memcpy and memset capabilities. It has been designed for virtualized
-environments.
-
-Each HIDMA HW instance consists of multiple DMA channels. These channels
-share the same bandwidth. The bandwidth utilization can be partitioned
-among channels based on the priority and weight assignments.
-
-There are only two priority levels and 15 weigh assignments possible.
-
-Other parameters here determine how much of the system bus this HIDMA
-instance can use like maximum read/write request and number of bytes to
-read/write in a single burst.
-
-Main node required properties:
-- compatible: "qcom,hidma-mgmt-1.0";
-- reg: Address range for DMA device
-- dma-channels: Number of channels supported by this DMA controller.
-- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
-  occupy the bus for in a single transaction. A memcpy requested is
-  fragmented to multiples of this amount. This parameter is used while
-  writing into destination memory. Setting this value incorrectly can
-  starve other peripherals in the system.
-- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
-  occupy the bus for in a single transaction. A memcpy request is
-  fragmented to multiples of this amount. This parameter is used while
-  reading the source memory. Setting this value incorrectly can starve
-  other peripherals in the system.
-- max-write-transactions: This value is how many times a write burst is
-  applied back to back while writing to the destination before yielding
-  the bus.
-- max-read-transactions: This value is how many times a read burst is
-  applied back to back while reading the source before yielding the bus.
-- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
-  Once a reset is applied to the HW, HW starts a timer for reset operation
-  to confirm. If reset is not completed within this time, HW reports reset
-  failure.
-
-Sub-nodes:
-
-HIDMA has one or more DMA channels that are used to move data from one
-memory location to another.
-
-When the OS is not in control of the management interface (i.e. it's a guest),
-the channel nodes appear on their own, not under a management node.
-
-Required properties:
-- compatible: must contain "qcom,hidma-1.0" for initial HW or
-  "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
-- reg: Addresses for the transfer and event channel
-- interrupts: Should contain the event interrupt
-- desc-count: Number of asynchronous requests this channel can handle
-- iommus: required a iommu node
-
-Optional properties for MSI:
-- msi-parent : See the generic MSI binding described in
- devicetree/bindings/interrupt-controller/msi.txt for a description of the
- msi-parent property.
-
-Example:
-
-Hypervisor OS configuration:
-
-	hidma-mgmt@f9984000 = {
-		compatible = "qcom,hidma-mgmt-1.0";
-		reg = <0xf9984000 0x15000>;
-		dma-channels = <6>;
-		max-write-burst-bytes = <1024>;
-		max-read-burst-bytes = <1024>;
-		max-write-transactions = <31>;
-		max-read-transactions = <31>;
-		channel-reset-timeout-cycles = <0x500>;
-
-		hidma_24: dma-controller@5c050000 {
-			compatible = "qcom,hidma-1.0";
-			reg = <0 0x5c050000 0x0 0x1000>,
-			      <0 0x5c0b0000 0x0 0x1000>;
-			interrupts = <0 389 0>;
-			desc-count = <10>;
-			iommus = <&system_mmu>;
-		};
-	};
-
-Guest OS configuration:
-
-	hidma_24: dma-controller@5c050000 {
-		compatible = "qcom,hidma-1.0";
-		reg = <0 0x5c050000 0x0 0x1000>,
-		      <0 0x5c0b0000 0x0 0x1000>;
-		interrupts = <0 389 0>;
-		desc-count = <10>;
-		iommus = <&system_mmu>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index 5da8291a7d..c21a4f073f 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -93,10 +93,10 @@ properties:
   data-width:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Data bus width per each DMA master in bytes.
+    minItems: 1
+    maxItems: 4
     items:
-      maxItems: 4
-      items:
-        enum: [4, 8, 16, 32]
+      enum: [4, 8, 16, 32]
 
   data_width:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -106,28 +106,28 @@ properties:
       deprecated. It' usage is discouraged in favor of data-width one. Moreover
       the property incorrectly permits to define data-bus width of 8 and 16
       bits, which is impossible in accordance with DW DMAC IP-core data book.
+    minItems: 1
+    maxItems: 4
     items:
-      maxItems: 4
-      items:
-        enum:
-          - 0 # 8 bits
-          - 1 # 16 bits
-          - 2 # 32 bits
-          - 3 # 64 bits
-          - 4 # 128 bits
-          - 5 # 256 bits
-        default: 0
+      enum:
+        - 0 # 8 bits
+        - 1 # 16 bits
+        - 2 # 32 bits
+        - 3 # 64 bits
+        - 4 # 128 bits
+        - 5 # 256 bits
+      default: 0
 
   multi-block:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       LLP-based multi-block transfer supported by hardware per
       each DMA channel.
+    minItems: 1
+    maxItems: 8
     items:
-      maxItems: 8
-      items:
-        enum: [0, 1]
-        default: 1
+      enum: [0, 1]
+      default: 1
 
   snps,max-burst-len:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -138,11 +138,11 @@ properties:
       will be from 1 to max-burst-len words. It's an array property with one
       cell per channel in the units determined by the value set in the
       CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+    minItems: 1
+    maxItems: 8
     items:
-      maxItems: 8
-      items:
-        enum: [4, 8, 16, 32, 64, 128, 256]
-        default: 256
+      enum: [4, 8, 16, 32, 64, 128, 256]
+      default: 256
 
   snps,dma-protection-control:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
index 363cf8bd15..525f5f3932 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -21,6 +21,7 @@ properties:
       - snps,axi-dma-1.01a
       - intel,kmb-axi-dma
       - starfive,jh7110-axi-dma
+      - starfive,jh8100-axi-dma
 
   reg:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 329847ef09..ff935a0068 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -82,6 +82,10 @@ properties:
     description: if defined, it indicates that the controller
       supports memory-to-memory transfer
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index e722fbcd8a..ddf82bf1e7 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -28,6 +28,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg