Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 28 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
new file mode 100644
index 0000000000..1e44245074
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
@@ -0,0 +1,28 @@
+Device-tree bindings for gpio-based FSI master driver
+-----------------------------------------------------
+
+Required properties:
+ - compatible = "fsi-master-gpio";
+ - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
+ - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
+
+Optional properties:
+ - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
+ - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
+ - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
+                                          functions (eg, external FSI masters)
+ - no-gpio-delays;			: Don't add extra delays between GPIO
+                                          accesses. This is useful when the HW
+					  GPIO block is running at a low enough
+					  frequency.
+
+Examples:
+
+    fsi-master {
+        compatible = "fsi-master-gpio", "fsi-master";
+        clock-gpios = <&gpio 0>;
+        data-gpios = <&gpio 1>;
+        enable-gpios = <&gpio 2>;
+        trans-gpios = <&gpio 3>;
+        mux-gpios = <&gpio 4>;
+    }