Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 204 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml
new file mode 100644
index 0000000000..30194880f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5592r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5592R/AD5593R DAC/ADC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5592r
+      - adi,ad5593r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  spi-cpol: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description: If not set internal 2.5V reference used.
+
+  reset-gpios:
+    maxItems: 1
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  "#gpio-cells":
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad5592r
+    then:
+      required:
+        - spi-cpol
+    else:
+      properties:
+        spi-cpol: false
+
+additionalProperties: false
+
+patternProperties:
+  "^(channel@)[0-7]$":
+    type: object
+    description: Child node to describe a channel
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      adi,mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 8]
+        description: |
+          Mode or function of this channel.
+          Macros specifying the valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+
+          The following values are currently supported:
+          * CH_MODE_UNUSED (the pin is unused)
+          * CH_MODE_ADC (the pin is ADC input)
+          * CH_MODE_DAC (the pin is DAC output)
+          * CH_MODE_DAC_AND_ADC (the pin is DAC output but can be monitored
+            by an ADC, since there is no disadvantage this should be
+            considered as the preferred DAC mode)
+          * CH_MODE_GPIO (the pin is registered with GPIOLIB)
+
+      adi,off-state:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          State of this channel when unused or the device gets removed.
+          Macros specifying the  valid values can be found in
+          <dt-bindings/iio/adi,ad5592r.h>.
+          * CH_OFFSTATE_PULLDOWN (the pin is pulled down)
+          * CH_OFFSTATE_OUT_LOW  (the pin is output low)
+          * CH_OFFSTATE_OUT_HIGH (the pin is output high)
+          * CH_OFFSTATE_OUT_TRISTATE (the pin is tristated output)
+
+    required:
+      - reg
+      - adi,mode
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adi,ad5592r.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        addac@0 {
+            compatible = "adi,ad5592r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            vref-supply = <&vref>;
+            reset-gpios = <&gpio0 86 0>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+            };
+            channel@3 {
+                reg = <3>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@4 {
+                reg = <4>;
+                adi,mode = <CH_MODE_UNUSED>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@5 {
+                reg = <5>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@7 {
+                reg = <7>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+        ad5593r@10 {
+            compatible = "adi,ad5593r";
+            #size-cells = <0>;
+            #address-cells = <1>;
+            #gpio-cells = <2>;
+            reg = <0x10>;
+            gpio-controller;
+
+            channel@0 {
+                reg = <0>;
+                adi,mode = <CH_MODE_DAC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@1 {
+                reg = <1>;
+                adi,mode = <CH_MODE_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@2 {
+                reg = <2>;
+                adi,mode = <CH_MODE_DAC_AND_ADC>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+            channel@6 {
+                reg = <6>;
+                adi,mode = <CH_MODE_GPIO>;
+                adi,off-state = <CH_OFFSTATE_PULLDOWN>;
+            };
+        };
+    };
+...