Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 95 insertions, 31 deletions

diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 5b1769c19b..418c168b22 100644
--- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -784,7 +784,7 @@ patternProperties:
       gpio-2: GPIO4
 
     allOf:
-      - $ref: ../pinctrl/pincfg-node.yaml#
+      - $ref: /schemas/pinctrl/pincfg-node.yaml#
 
     properties:
       drive-open-drain: true
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
index dc4ac41f24..a62916d07a 100644
--- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -18,9 +18,12 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ekth6915
-      - ilitek,ili2901
+    oneOf:
+      - items:
+          - enum:
+              - elan,ekth5015m
+          - const: elan,ekth6915
+      - const: elan,ekth6915
 
   reg:
     const: 0x10
@@ -33,6 +36,12 @@ properties:
   reset-gpios:
     description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
 
+  no-reset-on-power-off:
+    type: boolean
+    description:
+      Reset line is wired so that it can (and should) be left deasserted when
+      the power supply is off.
+
   vcc33-supply:
     description: The 3.3V supply to the touchscreen.
 
@@ -58,8 +67,8 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      ap_ts: touchscreen@10 {
-        compatible = "elan,ekth6915";
+      touchscreen@10 {
+        compatible = "elan,ekth5015m", "elan,ekth6915";
         reg = <0x10>;
 
         interrupt-parent = <&tlmm>;
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml
new file mode 100644
index 0000000000..1abeec768d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+  - Jiri Kosina <jkosina@suse.com>
+
+description:
+  Supports the Ilitek ILI2901 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili2901
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply: true
+
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@41 {
+        compatible = "ilitek,ili2901";
+        reg = <0x41>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
index c8832cd0d7..2025d6a542 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -11,10 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8058-vib
-      - qcom,pm8916-vib
-      - qcom,pm8921-vib
+    oneOf:
+      - enum:
+          - qcom,pm8058-vib
+          - qcom,pm8916-vib
+          - qcom,pm8921-vib
+          - qcom,pmi632-vib
+      - items:
+          - enum:
+              - qcom,pm7250b-vib
+              - qcom,pm7325b-vib
+              - qcom,pm7550ba-vib
+          - const: qcom,pmi632-vib
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index f2808cb4d9..745e57c051 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -39,7 +39,9 @@ properties:
       - edt,edt-ft5406
       - edt,edt-ft5506
       - evervision,ev-ft5726
+      - focaltech,ft5452
       - focaltech,ft6236
+      - focaltech,ft8719
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index 6c201a2ba8..0000000000
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/ti,twl.yaml.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
-   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
-   - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-};