diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 17:35:05 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-18 17:39:31 +0000 |
| commit | 85c675d0d09a45a135bddd15d7b385f8758c32fb (patch) | |
| tree | 76267dbc9b9a130337be3640948fe397b04ac629 /Documentation/devicetree/bindings/media | |
| parent | Adding upstream version 6.6.15. (diff) | |
| download | linux-85c675d0d09a45a135bddd15d7b385f8758c32fb.tar.xz linux-85c675d0d09a45a135bddd15d7b385f8758c32fb.zip | |
Adding upstream version 6.7.7.upstream/6.7.7
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/media')
21 files changed, 523 insertions, 70 deletions
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml index 3f9fa92703..0f95fe8dd9 100644 --- a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml @@ -19,6 +19,7 @@ properties: - amlogic,meson6-ir - amlogic,meson8b-ir - amlogic,meson-gxbb-ir + - amlogic,meson-s4-ir - items: - const: amlogic,meson-gx-ir - const: amlogic,meson-gxbb-ir diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml index 30a335b107..2008a47c05 100644 --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml @@ -18,6 +18,7 @@ properties: items: - enum: - starfive,jh7110-csi2rx + - ti,j721e-csi2rx - const: cdns,csi2rx reg: diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml index 1e2df8cf29..60f19e1152 100644 --- a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml @@ -14,6 +14,9 @@ description: |- interface and CCI (I2C compatible) control bus. The output format is raw Bayer. +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + properties: compatible: const: hynix,hi846 @@ -86,7 +89,7 @@ required: - vddd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -109,6 +112,8 @@ examples: vddio-supply = <®_camera_vddio>; reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; + orientation = <0>; + rotation = <0>; port { camera_out: endpoint { diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml new file mode 100644 index 0000000000..f6b8789206 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: onsemi 1/6-inch 720p CMOS Digital Image Sensor + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: |- + The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor + with an active pixel-array size of 1296H x 976V. It is programmable through + an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI + CSI-2 connection. + +properties: + compatible: + const: onnn,mt9m114 + + reg: + description: I2C device address + enum: + - 0x48 + - 0x5d + + clocks: + description: EXTCLK clock signal + maxItems: 1 + + vdd-supply: + description: + Core digital voltage supply, 1.8V + + vddio-supply: + description: + I/O digital voltage supply, 1.8V or 2.8V + + vaa-supply: + description: + Analog voltage supply, 2.8V + + reset-gpios: + description: |- + Reference to the GPIO connected to the RESET_BAR pin, if any (active + low). + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: [4, 5, 6] + + link-frequencies: true + remote-endpoint: true + + # The number and mapping of lanes (for CSI-2), and the bus width and + # signal polarities (for parallel and BT.656) are fixed and must not + # be specified. + + required: + - bus-type + - link-frequencies + +required: + - compatible + - reg + - clocks + - vdd-supply + - vddio-supply + - vaa-supply + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "onnn,mt9m114"; + reg = <0x48>; + + clocks = <&clk24m 0>; + + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + + vddio-supply = <®_cam_1v8>; + vdd-supply = <®_cam_1v8>; + vaa-supply = <®_2p8v>; + + port { + endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; + link-frequencies = /bits/ 64 <384000000>; + remote-endpoint = <&mipi_csi_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml index 763cebe03d..67c1c29132 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml @@ -68,12 +68,6 @@ properties: marked GPIO_ACTIVE_LOW. maxItems: 1 - rotation: - enum: - - 0 # Sensor Mounted Upright - - 180 # Sensor Mounted Upside Down - default: 0 - port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false @@ -114,7 +108,7 @@ required: - reset-gpios - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml index 50579c947f..d96199031b 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml @@ -52,10 +52,6 @@ properties: description: GPIO connected to the reset pin (active low) - orientation: true - - rotation: true - port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false @@ -95,7 +91,7 @@ required: - dvdd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml index a621032f9b..2c5e693566 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml @@ -44,11 +44,6 @@ properties: description: > Reference to the GPIO connected to the reset pin, if any. - rotation: - enum: - - 0 - - 180 - port: description: Digital Output Port $ref: /schemas/graph.yaml#/$defs/port-base @@ -85,7 +80,7 @@ required: - DOVDD-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml new file mode 100644 index 0000000000..01f8b2b3fd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV5642 Image Sensor + +maintainers: + - Fabio Estevam <festevam@gmail.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov5642 + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + AVDD-supply: + description: Analog voltage supply, 2.8V. + + DVDD-supply: + description: Digital core voltage supply, 1.5V. + + DOVDD-supply: + description: Digital I/O voltage supply, 1.8V. + + powerdown-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the powerdown pin, if any. + + reset-gpios: + maxItems: 1 + description: Reference to the GPIO connected to the reset pin, if any. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Video output port. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: [5, 6] + + bus-width: + enum: [8, 10] + default: 10 + + data-shift: + enum: [0, 2] + default: 0 + + hsync-active: + enum: [0, 1] + default: 1 + + vsync-active: + enum: [0, 1] + default: 1 + + pclk-sample: + enum: [0, 1] + default: 1 + + allOf: + - if: + properties: + bus-type: + const: 6 + then: + properties: + hsync-active: false + vsync-active: false + + - if: + properties: + bus-width: + const: 10 + then: + properties: + data-shift: + const: 0 + + required: + - bus-type + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@3c { + compatible = "ovti,ov5642"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clk_ext_camera>; + DOVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen3_reg>; + DVDD-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + ov5642_to_parallel: endpoint { + bus-type = <MEDIA_BUS_TYPE_PARALLEL>; + remote-endpoint = <¶llel_from_ov5642>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml index 6829a4aadd..3368b3bd8e 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Omnivision OV5693/OV5695 CMOS Sensors maintainers: - - Tommaso Merciai <tommaso.merciai@amarulasolutions.com> + - Tommaso Merciai <tomm.merciai@gmail.com> description: | The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml index e2470dd592..60903da84e 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml @@ -91,7 +91,7 @@ required: - vddd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml index 642f9b15d3..9a00dab2e8 100644 --- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml @@ -44,14 +44,6 @@ properties: description: Sensor reset (XCLR) GPIO maxItems: 1 - flash-leds: true - - lens-focus: true - - orientation: true - - rotation: true - port: $ref: /schemas/graph.yaml#/$defs/port-base unevaluatedProperties: false @@ -89,7 +81,7 @@ required: - ovdd-supply - port -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml index 289737721c..0b71e6f911 100644 --- a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml @@ -69,6 +69,7 @@ properties: maxItems: 1 i2c-alias: + $ref: /schemas/types.yaml#/definitions/uint32 description: The I2C address used for the serializer. Transactions to this address on the I2C bus where the deserializer resides are diff --git a/Documentation/devicetree/bindings/media/nokia,n900-ir b/Documentation/devicetree/bindings/media/nokia,n900-ir deleted file mode 100644 index 13a18ce37d..0000000000 --- a/Documentation/devicetree/bindings/media/nokia,n900-ir +++ /dev/null @@ -1,20 +0,0 @@ -Device-Tree bindings for LIRC TX driver for Nokia N900(RX51) - -Required properties: - - compatible: should be "nokia,n900-ir". - - pwms: specifies PWM used for IR signal transmission. - -Example node: - - pwm9: dmtimer-pwm@9 { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer9>; - ti,clock-source = <0x00>; /* timer_sys_ck */ - #pwm-cells = <3>; - }; - - ir: n900-ir { - compatible = "nokia,n900-ir"; - - pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ - }; diff --git a/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml b/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml new file mode 100644 index 0000000000..b47468e545 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nuvoton,npcm-ece.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Encoding Compression Engine + +maintainers: + - Joseph Liu <kwliu@nuvoton.com> + - Marvin Lin <kflin@nuvoton.com> + +description: | + Video Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs. + +properties: + compatible: + enum: + - nuvoton,npcm750-ece + - nuvoton,npcm845-ece + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + + ece: video-codec@f0820000 { + compatible = "nuvoton,npcm750-ece"; + reg = <0xf0820000 0x2000>; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_ECE>; + }; diff --git a/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml b/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml new file mode 100644 index 0000000000..c885f559d2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/nuvoton,npcm-vcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Video Capture/Differentiation Engine + +maintainers: + - Joseph Liu <kwliu@nuvoton.com> + - Marvin Lin <kflin@nuvoton.com> + +description: | + Video Capture/Differentiation Engine (VCD) present on Nuvoton NPCM SoCs. + +properties: + compatible: + enum: + - nuvoton,npcm750-vcd + - nuvoton,npcm845-vcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + resets: + maxItems: 1 + + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access GCR (Global Control Register) registers. + + nuvoton,sysgfxi: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access GFXI (Graphics Core Information) registers. + + nuvoton,ece: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to access ECE (Encoding Compression Engine) registers. + + memory-region: + maxItems: 1 + description: + CMA pool to use for buffers allocation instead of the default CMA pool. + +required: + - compatible + - reg + - interrupts + - resets + - nuvoton,sysgcr + - nuvoton,sysgfxi + - nuvoton,ece + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h> + + vcd: vcd@f0810000 { + compatible = "nuvoton,npcm750-vcd"; + reg = <0xf0810000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_VCD>; + nuvoton,sysgcr = <&gcr>; + nuvoton,sysgfxi = <&gfxi>; + nuvoton,ece = <&ece>; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml index d5f80976f4..6228fd2b32 100644 --- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml @@ -48,6 +48,14 @@ properties: iommus: maxItems: 2 + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: video-mem + - const: cpu-cfg + operating-points-v2: true opp-table: type: object diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml index 772ec3283b..c57e1f4888 100644 --- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml +++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml @@ -68,6 +68,13 @@ properties: iommus: maxItems: 1 + resets: + items: + - description: AXI reset line + - description: AXI bus interface unit reset line + - description: APB reset line + - description: APB bus interface unit reset line + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml index 3691cd4962..3a5ff3f470 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -75,13 +75,20 @@ properties: power-domains: maxItems: 1 + samsung,pmu-syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Power Management Unit (PMU) system controller interface, used to + power/start the ISP. + patternProperties: "^pmu@[0-9a-f]+$": type: object additionalProperties: false + deprecated: true description: Node representing the SoC's Power Management Unit (duplicated with the - correct PMU node in the SoC). + correct PMU node in the SoC). Deprecated, use samsung,pmu-syscon. properties: reg: @@ -131,6 +138,7 @@ required: - clock-names - interrupts - ranges + - samsung,pmu-syscon - '#size-cells' additionalProperties: false @@ -179,15 +187,12 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - i2c-isp@12140000 { compatible = "samsung,exynos4212-i2c-isp"; reg = <0x12140000 0x100>; diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml index b3486c38a0..7808d61f1f 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -118,7 +118,7 @@ examples: #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x18000000>; + ranges = <0x0 0x0 0xba1000>; clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; @@ -133,9 +133,9 @@ examples: pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; - fimc@11800000 { + fimc@0 { compatible = "samsung,exynos4212-fimc"; - reg = <0x11800000 0x1000>; + reg = <0x00000000 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; @@ -152,9 +152,9 @@ examples: /* ... FIMC 1-3 */ - csis@11880000 { + csis@80000 { compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x4000>; + reg = <0x00080000 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; @@ -187,9 +187,9 @@ examples: /* ... CSIS 1 */ - fimc-lite@12390000 { + fimc-lite@b90000 { compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; + reg = <0xb90000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; @@ -199,9 +199,9 @@ examples: /* ... FIMC-LITE 1 */ - fimc-is@12000000 { + fimc-is@800000 { compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; + reg = <0x00800000 0x260000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&isp_clock CLK_ISP_FIMC_LITE0>, @@ -237,18 +237,15 @@ examples: <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; power-domains = <&pd_isp>; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c-isp@12140000 { + i2c-isp@940000 { compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; + reg = <0x00940000 0x100>; clocks = <&isp_clock CLK_ISP_I2C1_ISP>; clock-names = "i2c_isp"; pinctrl-0 = <&fimc_is_i2c1>; diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml new file mode 100644 index 0000000000..f762fdc05e --- /dev/null +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721E CSI2RX Shim + +description: | + The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that + enables sending captured frames to memory over PSI-L DMA. In the J721E + Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the + CSI_RX_IF section. + +maintainers: + - Jai Luthra <j-luthra@ti.com> + +properties: + compatible: + const: ti,j721e-csi2rx-shim + + dmas: + maxItems: 1 + + dma-names: + items: + - const: rx0 + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + ranges: true + + "#address-cells": true + + "#size-cells": true + +patternProperties: + "^csi-bridge@": + type: object + description: CSI2 bridge node. + $ref: cdns,csi2rx.yaml# + +required: + - compatible + - reg + - dmas + - dma-names + - power-domains + - ranges + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + ti_csi2rx0: ticsi2rx@4500000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_udmap 0x4940>; + dma-names = "rx0"; + reg = <0x4500000 0x1000>; + power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cdns_csi2rx: csi-bridge@4504000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x4504000 0x1000>; + clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>, + <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + + reg = <0>; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index a211d49dc2..26e3e7d7c6 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -160,6 +160,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 8 + uniqueItems: true items: # Assume up to 9 physical lane indices maximum: 8 |