Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 124 deletions

diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
deleted file mode 100644
index e4eedd3bd2..0000000000
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-wdt.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-