Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
new file mode 100644
index 000000000..a9fb0a912
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt
@@ -0,0 +1,35 @@
+* Atmel SDHCI controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
+sdhci-of-at91 driver.
+
+Required properties:
+- compatible:		Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci"
+			or "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci".
+- clocks:		Phandlers to the clocks.
+- clock-names:		Must be "hclock", "multclk", "baseclk" for
+			"atmel,sama5d2-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x7-sdhci".
+
+Optional properties:
+- assigned-clocks:	The same with "multclk".
+- assigned-clock-rates	The rate of "multclk" in order to not rely on the
+			gck configuration set by previous components.
+- microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
+  inverted. The default polarity for this signal is described in the datasheet.
+  For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
+  and a capacitor (see "SDMMC I/O Calibration" chapter).
+
+Example:
+
+mmc0: sdio-host@a0000000 {
+	compatible = "atmel,sama5d2-sdhci";
+	reg = <0xa0000000 0x300>;
+	interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+	clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+	clock-names = "hclock", "multclk", "baseclk";
+	assigned-clocks = <&sdmmc0_gclk>;
+	assigned-clock-rates = <480000000>;
+};