Merging upstream version 6.7.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

20 files changed, 855 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
index 4e7a456ea4..c7df4cd341 100644
--- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - amlogic,c3-periphs-pinctrl
+      - amlogic,t7-periphs-pinctrl
       - amlogic,meson-a1-periphs-pinctrl
       - amlogic,meson-s4-periphs-pinctrl
 
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
index 4478a76171..62890a0aea 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -24,6 +24,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    additionalProperties: false
 
     properties:
       function:
@@ -37,6 +38,10 @@ patternProperties:
         enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
                 gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
 
+    patternProperties:
+      '-pins$':
+        $ref: '#/patternProperties/-pins$'
+
 allOf:
   - $ref: pinctrl.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
index 73e1caa7c0..7cc0e16508 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -24,6 +24,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    unevaluatedProperties: false
 
     properties:
       function:
@@ -36,11 +37,15 @@ patternProperties:
 
       pins:
         enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
-                gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
+                gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35,
                 dectpd_grp, vdsl_phy_override_0_grp,
                 vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
                 vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
 
+    patternProperties:
+      '-pins$':
+        $ref: '#/patternProperties/-pins$'
+
 allOf:
   - $ref: pinctrl.yaml#
 
@@ -122,46 +127,46 @@ examples:
 
       pinctrl_nand: nand-pins {
         function = "nand";
-        group = "nand_grp";
+        pins = "nand_grp";
       };
 
       pinctrl_gpio35_alt: gpio35_alt-pins {
         function = "gpio35_alt";
-        pin = "gpio35";
+        pins = "gpio35";
       };
 
       pinctrl_dectpd: dectpd-pins {
         function = "dectpd";
-        group = "dectpd_grp";
+        pins = "dectpd_grp";
       };
 
       pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
         function = "vdsl_phy_override_0";
-        group = "vdsl_phy_override_0_grp";
+        pins = "vdsl_phy_override_0_grp";
       };
 
       pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
         function = "vdsl_phy_override_1";
-        group = "vdsl_phy_override_1_grp";
+        pins = "vdsl_phy_override_1_grp";
       };
 
       pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
         function = "vdsl_phy_override_2";
-        group = "vdsl_phy_override_2_grp";
+        pins = "vdsl_phy_override_2_grp";
       };
 
       pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
         function = "vdsl_phy_override_3";
-        group = "vdsl_phy_override_3_grp";
+        pins = "vdsl_phy_override_3_grp";
       };
 
       pinctrl_dsl_gpio8: dsl_gpio8-pins {
         function = "dsl_gpio8";
-        group = "dsl_gpio8";
+        pins = "dsl_gpio8";
       };
 
       pinctrl_dsl_gpio9: dsl_gpio9-pins {
         function = "dsl_gpio9";
-        group = "dsl_gpio9";
+        pins = "dsl_gpio9";
       };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
index 2750ba42ae..f57bb34c31 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -24,6 +24,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    unevaluatedProperties: false
 
     properties:
       function:
@@ -36,6 +37,10 @@ patternProperties:
                 gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
                 usb_port1 ]
 
+    patternProperties:
+      '-pins$':
+        $ref: '#/patternProperties/-pins$'
+
 allOf:
   - $ref: pinctrl.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
index 2f6c540498..ce6fc5380c 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -24,15 +24,16 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    unevaluatedProperties: false
 
     properties:
       function:
         enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
                 pwm_syn_clk, sys_irq ]
 
-      pins:
+      groups:
         enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
-                led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
+                led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk_grp, sys_irq_grp ]
 
 allOf:
   - $ref: pinctrl.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
index b3044f8057..5f7ed7d3dd 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -24,6 +24,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    unevaluatedProperties: false
 
     properties:
       function:
@@ -41,6 +42,10 @@ patternProperties:
                 gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
                 gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
 
+    patternProperties:
+      '-pins$':
+        $ref: '#/patternProperties/-pins$'
+
 allOf:
   - $ref: pinctrl.yaml#
 
@@ -204,6 +209,6 @@ examples:
 
       pinctrl_nand: nand-pins {
         function = "nand";
-        group = "nand_grp";
+        pins = "nand_grp";
       };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
index 3236871827..d549e94550 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -24,6 +24,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    unevaluatedProperties: false
 
     properties:
       function:
@@ -42,6 +43,10 @@ patternProperties:
                 gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
                 gpio31, uart1_grp ]
 
+    patternProperties:
+      '-pins$':
+        $ref: '#/patternProperties/-pins$'
+
 allOf:
   - $ref: pinctrl.yaml#
 
@@ -215,6 +220,6 @@ examples:
 
       pinctrl_uart1: uart1-pins {
         function = "uart1";
-        group = "uart1_grp";
+        pins = "uart1_grp";
       };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
new file mode 100644
index 0000000000..3e84728988
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM845 Pin Controller and GPIO
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
+  the multiplexing block, Each pin supports GPIO functionality (GPIOx)
+  and multiple functions that directly connect the pin to different
+  hardware blocks.
+
+properties:
+  compatible:
+    const: nuvoton,npcm845-pinctrl
+
+  ranges:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
+patternProperties:
+  '^gpio@':
+    type: object
+    additionalProperties: false
+
+    description:
+      Eight GPIO banks that each contain 32 GPIOs.
+
+    properties:
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      gpio-ranges:
+        maxItems: 1
+
+    required:
+      - gpio-controller
+      - '#gpio-cells'
+      - reg
+      - interrupts
+      - gpio-ranges
+
+  '-mux$':
+    $ref: pinmux-node.yaml#
+
+    properties:
+      groups:
+        description:
+          One or more groups of pins to mux to a certain function
+        items:
+          enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
+                  smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
+                  smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
+                  smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
+                  spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
+                  spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
+                  bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
+                  r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
+                  fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
+                  fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
+                  pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
+                  ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
+                  smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
+                  sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
+                  mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
+                  scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
+                  spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
+                  smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
+                  spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
+                  hgpio5, hgpio6, hgpio7 ]
+
+      function:
+        description:
+          The function that a group of pins is muxed to
+        enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
+                smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b,
+                smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
+                smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3,
+                spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2,
+                spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2,
+                bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen,
+                r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3,
+                fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10,
+                fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2,
+                pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2,
+                ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2,
+                smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1,
+                sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11,
+                mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk,
+                scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1,
+                spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den,
+                smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix,
+                spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4,
+                hgpio5, hgpio6, hgpio7 ]
+
+    dependencies:
+      groups: [ function ]
+      function: [ groups ]
+
+    additionalProperties: false
+
+  '^pin':
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          A list of pins to configure in certain ways, such as enabling
+          debouncing
+        items:
+          pattern: '^GPIO([0-9]|[0-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-6])'
+
+      bias-disable: true
+
+      bias-pull-up: true
+
+      bias-pull-down: true
+
+      input-enable: true
+
+      output-low: true
+
+      output-high: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      input-debounce:
+        description:
+          Debouncing periods in microseconds, one period per interrupt
+          bank found in the controller
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+
+      slew-rate:
+        description: |
+          0: Low rate
+          1: High rate
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+
+      drive-strength:
+        enum: [ 0, 1, 2, 4, 8, 12 ]
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - nuvoton,sysgcr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pinctrl: pinctrl@f0010000 {
+        compatible = "nuvoton,npcm845-pinctrl";
+        ranges = <0x0 0x0 0xf0010000 0x8000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        nuvoton,sysgcr = <&gcr>;
+
+        gpio0: gpio@0 {
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x0 0xb0>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+          gpio-ranges = <&pinctrl 0 0 32>;
+        };
+
+        fanin0_pin: fanin0-mux {
+          groups = "fanin0";
+          function = "fanin0";
+        };
+
+        pin34_slew: pin34-slew {
+          pins = "GPIO34/I3C4_SDA";
+          bias-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
index d49aafd8c5..a24286e4de 100644
--- a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
@@ -9,7 +9,7 @@ title: NXP S32G2 pin controller
 
 maintainers:
   - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
-  - Chester Lin <clin@suse.com>
+  - Chester Lin <chester62515@gmail.com>
 
 description: |
   S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
index 2aedb7e7bc..5ece3b9d67 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -43,7 +43,8 @@ patternProperties:
   "-state$":
     oneOf:
       - $ref: "#/$defs/qcom-mdm9607-tlmm-state"
-      - patternProperties:
+      - additionalProperties: false
+        patternProperties:
           ".*":
             $ref: "#/$defs/qcom-mdm9607-tlmm-state"
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 9efb765095..a602bf0d27 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -67,8 +67,8 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins. Functions are only valid for gpio pins.
         enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
-                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
-                blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+                blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6,
+                blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
                 blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1,
                 gp0_clk, gp1_clk, sdc3, wlan ]
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
index e119a226a4..2173c52556 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -28,6 +28,7 @@ properties:
   gpio-controller: true
   "#gpio-cells": true
   gpio-ranges: true
+  wakeup-parent: true
 
   gpio-reserved-ranges:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 368d44ff54..c8735ab97e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -41,6 +41,10 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 88
+
   gpio-line-names:
     maxItems: 175
 
diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml
new file mode 100644
index 0000000000..fc6c65fea7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1315e-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD1315E Pin Controller
+
+maintainers:
+  - TY Chang <tychang@realtek.com>
+
+description:
+  The Realtek DHC RTD1315E is a high-definition media processor SoC. The
+  RTD1315E pin controller is used to control pin function, pull up/down
+  resistor, drive strength, schmitt trigger and power source.
+
+properties:
+  compatible:
+    const: realtek,rtd1315e-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      pins:
+        items:
+          enum: [ gpio_0, gpio_1, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd,
+                  gpio_6, gpio_7, gpio_8, gpio_9, gpio_10, gpio_11, gpio_12,
+                  gpio_13, gpio_14, gpio_15, gpio_16, gpio_17, gpio_18, gpio_19,
+                  gpio_20, emmc_data_0, emmc_data_1, emmc_data_2, usb_cc2, gpio_25,
+                  gpio_26, gpio_27, gpio_28, gpio_29, gpio_30, gpio_31, gpio_32,
+                  gpio_33, gpio_34, gpio_35, hif_data, hif_en, hif_rdy, hif_clk,
+                  gpio_dummy_40, gpio_dummy_41, gpio_dummy_42, gpio_dummy_43,
+                  gpio_dummy_44, gpio_dummy_45, gpio_46, gpio_47, gpio_48, gpio_49,
+                  gpio_50, usb_cc1, emmc_data_3, emmc_data_4, ir_rx, ur0_rx, ur0_tx,
+                  gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_dummy_63,
+                  gpio_dummy_64, gpio_dummy_65, gpio_66, gpio_67, gpio_68, gpio_69,
+                  gpio_70, gpio_71, gpio_72, gpio_dummy_73, emmc_data_5, emmc_data_6,
+                  emmc_data_7, gpio_dummy_77, gpio_78, gpio_79, gpio_80, gpio_81,
+                  ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en,
+                  ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc,
+                  dmic_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc, tdm_ai_loc,
+                  ai_loc, spdif_loc, hif_en_loc, scan_switch, wd_rset, boot_sel,
+                  reset_n, testmode ]
+
+      function:
+        enum: [ gpio, nf, emmc, ao, gspi_loc0, gspi_loc1, uart0, uart1,
+                uart2_loc0, uart2_loc1, i2c0, i2c1, i2c4, i2c5, pcie1,
+                etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1, pwm1_loc0,
+                pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1,
+                spdif_optical_loc0, spdif_optical_loc1, usb_cc1, usb_cc2,
+                sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, tdm_ai_loc0,
+                tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0,
+                vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0,
+                vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1,
+                ir_rx, uart2_disable, gspi_disable, hi_width_disable,
+                hi_width_1bit, sf_disable, sf_enable, scpu_ejtag_loc0,
+                scpu_ejtag_loc1, scpu_ejtag_loc2, scpu_ejtag_loc3,
+                acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2,
+                vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2,
+                aucpu_ejtag_loc0, aucpu_ejtag_loc1, aucpu_ejtag_loc2,
+                gpu_ejtag, iso_tristate, dbg_out0, dbg_out1, standby_dbg,
+                spdif, arm_trace_debug_disable, arm_trace_debug_enable,
+                aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
+                scpu_ejtag_disable, vtc_dmic_loc_disable, vtc_tdm_disable,
+                vtc_i2si_disable, tdm_ai_disable, ai_disable, spdif_disable,
+                hif_disable, hif_enable, test_loop, pmic_pwrup ]
+
+      drive-strength:
+        enum: [4, 8]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      drive-push-pull: true
+
+      power-source:
+        description: |
+          Valid arguments are described as below:
+          0: power supply of 1.8V
+          1: power supply of 3.3V
+        enum: [0, 1]
+
+      realtek,drive-strength-p:
+        description: |
+          Some of pins can be driven using the P-MOS and N-MOS transistor to
+          achieve finer adjustments. The block-diagram representation is as
+          follows:
+                         VDD
+                          |
+                      ||--+
+               +-----o||     P-MOS-FET
+               |      ||--+
+          IN --+          +----- out
+               |      ||--+
+               +------||     N-MOS-FET
+                      ||--+
+                          |
+                         GND
+          The driving strength of the P-MOS/N-MOS transistors impacts the
+          waveform's rise/fall times. Greater driving strength results in
+          shorter rise/fall times. Each P-MOS and N-MOS transistor offers
+          8 configurable levels (0 to 7), with higher values indicating
+          greater driving strength, contributing to achieving the desired
+          speed.
+
+          The realtek,drive-strength-p is used to control the driving strength
+          of the P-MOS output.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      realtek,drive-strength-n:
+        description: |
+          Similar to the realtek,drive-strength-p, the realtek,drive-strength-n
+          is used to control the driving strength of the N-MOS output.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      realtek,duty-cycle:
+        description: |
+          An integer describing the level to adjust output duty cycle, controlling
+          the proportion of positive and negative waveforms in nanoseconds.
+          Valid arguments are described as below:
+          0: 0ns
+          2: + 0.25ns
+          3: + 0.5ns
+          4: -0.25ns
+          5: -0.5ns
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 2, 3, 4, 5 ]
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+     pinctrl@4e000 {
+         compatible = "realtek,rtd1315e-pinctrl";
+         reg = <0x4e000 0x130>;
+
+         emmc-hs200-pins {
+             pins = "emmc_clk",
+                    "emmc_cmd",
+                    "emmc_data_0",
+                    "emmc_data_1",
+                    "emmc_data_2",
+                    "emmc_data_3",
+                    "emmc_data_4",
+                    "emmc_data_5",
+                    "emmc_data_6",
+                    "emmc_data_7";
+             function = "emmc";
+             realtek,drive-strength-p = <0x2>;
+             realtek,drive-strength-n = <0x2>;
+         };
+
+         i2c-0-pins {
+             pins = "gpio_12",
+                    "gpio_13";
+             function = "i2c0";
+             drive-strength = <4>;
+         };
+     };
diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml
new file mode 100644
index 0000000000..f07361d60a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1319d-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD1319D Pin Controller
+
+maintainers:
+  - TY Chang <tychang@realtek.com>
+
+description:
+  The Realtek DHC RTD1319D is a high-definition media processor SoC. The
+  RTD1319D pin controller is used to control pin function, pull up/down
+  resistor, drive strength, schmitt trigger and power source.
+
+properties:
+  compatible:
+    const: realtek,rtd1319d-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      pins:
+        items:
+          enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7,
+                  gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14,
+                  gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21,
+                  gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28,
+                  gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35,
+                  hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42,
+                  gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49,
+                  gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx,
+                  gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63,
+                  gpio_64, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd, emmc_data_0,
+                  emmc_data_1, emmc_data_2, emmc_data_3, emmc_data_4, emmc_data_5,
+                  emmc_data_6, emmc_data_7, dummy, gpio_78, gpio_79, gpio_80,
+                  gpio_81, ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en,
+                  ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc,
+                  dmic_loc, ejtag_secpu_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc,
+                  tdm_ai_loc, ai_loc, spdif_loc, hif_en_loc, sc0_loc, sc1_loc,
+                  scan_switch, wd_rset, boot_sel, reset_n, testmode ]
+
+      function:
+        enum: [ gpio, nf, emmc, tp0, tp1, sc0, sc0_data0, sc0_data1, sc0_data2,
+                sc1, sc1_data0, sc1_data1, sc1_data2, ao, gspi_loc0, gspi_loc1,
+                uart0, uart1, uart2_loc0, uart2_loc1, i2c0, i2c1, i2c3, i2c4,
+                i2c5, pcie1, sdio, etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1,
+                pwm1_loc0, pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1,
+                qam_agc_if0, qam_agc_if1, spdif_optical_loc0, spdif_optical_loc1,
+                usb_cc1, usb_cc2, vfd, sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1,
+                tdm_ai_loc0, tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0,
+                vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0,
+                vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1, ir_rx,
+                uart2_disable, gspi_disable, hi_width_disable, hi_width_1bit,
+                sf_disable, sf_enable, scpu_ejtag_loc0, scpu_ejtag_loc1,
+                scpu_ejtag_loc2, acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2,
+                vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2, secpu_ejtag_loc0,
+                secpu_ejtag_loc1, secpu_ejtag_loc2, aucpu_ejtag_loc0, aucpu_ejtag_loc1,
+                aucpu_ejtag_loc2, iso_tristate, dbg_out0, dbg_out1, standby_dbg,
+                spdif, arm_trace_debug_disable, arm_trace_debug_enable,
+                aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
+                scpu_ejtag_disable, secpu_ejtag_disable, vtc_dmic_loc_disable,
+                vtc_tdm_disable, vtc_i2si_disable, tdm_ai_disable, ai_disable,
+                spdif_disable, hif_disable, hif_enable, test_loop, pmic_pwrup ]
+
+      drive-strength:
+        enum: [4, 8]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      drive-push-pull: true
+
+      power-source:
+        description: |
+          Valid arguments are described as below:
+          0: power supply of 1.8V
+          1: power supply of 3.3V
+        enum: [0, 1]
+
+      realtek,drive-strength-p:
+        description: |
+          Some of pins can be driven using the P-MOS and N-MOS transistor to
+          achieve finer adjustments. The block-diagram representation is as
+          follows:
+                         VDD
+                          |
+                      ||--+
+               +-----o||     P-MOS-FET
+               |      ||--+
+          IN --+          +----- out
+               |      ||--+
+               +------||     N-MOS-FET
+                      ||--+
+                          |
+                         GND
+          The driving strength of the P-MOS/N-MOS transistors impacts the
+          waveform's rise/fall times. Greater driving strength results in
+          shorter rise/fall times. Each P-MOS and N-MOS transistor offers
+          8 configurable levels (0 to 7), with higher values indicating
+          greater driving strength, contributing to achieving the desired
+          speed.
+
+          The realtek,drive-strength-p is used to control the driving strength
+          of the P-MOS output.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      realtek,drive-strength-n:
+        description: |
+          Similar to the realtek,drive-strength-p, the realtek,drive-strength-n
+          is used to control the driving strength of the N-MOS output.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      realtek,duty-cycle:
+        description: |
+          An integer describing the level to adjust output duty cycle, controlling
+          the proportion of positive and negative waveforms in nanoseconds.
+          Valid arguments are described as below:
+          0: 0ns
+          2: + 0.25ns
+          3: + 0.5ns
+          4: -0.25ns
+          5: -0.5ns
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 2, 3, 4, 5 ]
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+     pinctrl@4e000 {
+         compatible = "realtek,rtd1319d-pinctrl";
+         reg = <0x4e000 0x130>;
+
+         emmc-hs200-pins {
+             pins = "emmc_clk",
+                    "emmc_cmd",
+                    "emmc_data_0",
+                    "emmc_data_1",
+                    "emmc_data_2",
+                    "emmc_data_3",
+                    "emmc_data_4",
+                    "emmc_data_5",
+                    "emmc_data_6",
+                    "emmc_data_7";
+             function = "emmc";
+             realtek,drive-strength-p = <0x2>;
+             realtek,drive-strength-n = <0x2>;
+         };
+
+         i2c-0-pins {
+             pins = "gpio_12",
+                    "gpio_13";
+             function = "i2c0";
+             drive-strength = <4>;
+         };
+     };
diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml
new file mode 100644
index 0000000000..671e4ec846
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1619b-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD1619B Pin Controller
+
+maintainers:
+  - TY Chang <tychang@realtek.com>
+
+description:
+  The Realtek DHC RTD1619B is a high-definition media processor SoC. The
+  RTD1619B pin controller is used to control pin function, pull up/down
+  resistor, drive strength, schmitt trigger and power source.
+
+properties:
+  compatible:
+    const: realtek,rtd1619b-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      pins:
+        items:
+          enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7,
+                  gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14,
+                  gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21,
+                  gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28,
+                  gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35,
+                  hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42,
+                  gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49,
+                  gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx,
+                  gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63,
+                  gpio_64, gpio_65, gpio_66, gpio_67, gpio_68, gpio_69, gpio_70,
+                  gpio_71, gpio_72, gpio_73, gpio_74, gpio_75, gpio_76, emmc_cmd,
+                  spi_ce_n, spi_sck, spi_so, spi_si, emmc_rst_n, emmc_dd_sb,
+                  emmc_clk, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3,
+                  emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, ur2_loc,
+                  gspi_loc, sdio_loc, hi_loc, hi_width, sf_en, arm_trace_dbg_en,
+                  pwm_01_open_drain_en_loc0, pwm_23_open_drain_en_loc0,
+                  pwm_01_open_drain_en_loc1, pwm_23_open_drain_en_loc1,
+                  ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, dmic_loc,
+                  iso_gspi_loc, ejtag_ve3_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc ]
+
+      function:
+        enum: [ gpio, nf, nf_spi, spi, pmic, spdif, spdif_coaxial, spdif_optical_loc0,
+                spdif_optical_loc1, emmc_spi, emmc, sc1, uart0, uart1, uart2_loc0, uart2_loc1,
+                gspi_loc1, iso_gspi_loc1, i2c0, i2c1, i2c3, i2c4, i2c5, pwm0, pwm1, pwm2,
+                pwm3, etn_led, etn_phy, etn_clk, sc0, vfd, gspi_loc0, iso_gspi_loc0, pcie1,
+                pcie2, sd, sdio_loc0, sdio_loc1, hi, hi_m, dc_fan, pll_test_loc0, pll_test_loc1,
+                usb_cc1, usb_cc2, ir_rx, tdm_ai_loc0, tdm_ai_loc1, dmic_loc0, dmic_loc1,
+                ai_loc0, ai_loc1, tp0, tp1, ao, uart2_disable, gspi_disable, sdio_disable,
+                hi_loc_disable, hi_loc0, hi_width_disable, hi_width_1bit, vtc_i2si_loc0,
+                vtc_tdm_loc0, vtc_dmic_loc0, vtc_i2si_loc1, vtc_tdm_loc1, vtc_dmic_loc1,
+                vtc_i2so, ve3_ejtag_loc0, aucpu0_ejtag_loc0, aucpu1_ejtag_loc0, ve3_ejtag_loc1,
+                aucpu0_ejtag_loc1, aucpu1_ejtag_loc1, ve3_ejtag_loc2, aucpu0_ejtag_loc2,
+                aucpu1_ejtag_loc2, scpu_ejtag_loc0, acpu_ejtag_loc0, vcpu_ejtag_loc0,
+                scpu_ejtag_loc1, acpu_ejtag_loc1, vcpu_ejtag_loc1, scpu_ejtag_loc2,
+                acpu_ejtag_loc2, vcpu_ejtag_loc2, ve3_ejtag_disable, aucpu0_ejtag_disable,
+                aucpu1_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable,
+                scpu_ejtag_disable, iso_gspi_disable, sf_disable, sf_enable,
+                arm_trace_debug_disable, arm_trace_debug_enable, pwm_normal, pwm_open_drain,
+                standby_dbg, test_loop_dis ]
+
+      drive-strength:
+        enum: [4, 8]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      drive-push-pull: true
+
+      power-source:
+        description: |
+          Valid arguments are described as below:
+          0: power supply of 1.8V
+          1: power supply of 3.3V
+        enum: [0, 1]
+
+      realtek,drive-strength-p:
+        description: |
+          Some of pins can be driven using the P-MOS and N-MOS transistor to
+          achieve finer adjustments. The block-diagram representation is as
+          follows:
+                         VDD
+                          |
+                      ||--+
+               +-----o||     P-MOS-FET
+               |      ||--+
+          IN --+          +----- out
+               |      ||--+
+               +------||     N-MOS-FET
+                      ||--+
+                          |
+                         GND
+          The driving strength of the P-MOS/N-MOS transistors impacts the
+          waveform's rise/fall times. Greater driving strength results in
+          shorter rise/fall times. Each P-MOS and N-MOS transistor offers
+          8 configurable levels (0 to 7), with higher values indicating
+          greater driving strength, contributing to achieving the desired
+          speed.
+
+          The realtek,drive-strength-p is used to control the driving strength
+          of the P-MOS output.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      realtek,drive-strength-n:
+        description: |
+          Similar to the realtek,drive-strength-p, the realtek,drive-strength-n
+          is used to control the driving strength of the N-MOS output.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+
+      realtek,duty-cycle:
+        description: |
+          An integer describing the level to adjust output duty cycle, controlling
+          the proportion of positive and negative waveforms in nanoseconds.
+          Valid arguments are described as below:
+          0: 0ns
+          2: + 0.25ns
+          3: + 0.5ns
+          4: -0.25ns
+          5: -0.5ns
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 2, 3, 4, 5 ]
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+     pinctrl@4e000 {
+         compatible = "realtek,rtd1619b-pinctrl";
+         reg = <0x4e000 0x130>;
+
+         emmc-hs200-pins {
+             pins = "emmc_clk",
+                    "emmc_cmd",
+                    "emmc_data_0",
+                    "emmc_data_1",
+                    "emmc_data_2",
+                    "emmc_data_3",
+                    "emmc_data_4",
+                    "emmc_data_5",
+                    "emmc_data_6",
+                    "emmc_data_7";
+             function = "emmc";
+             realtek,drive-strength-p = <0x2>;
+             realtek,drive-strength-n = <0x2>;
+         };
+
+         i2c-0-pins {
+             pins = "gpio_12",
+                    "gpio_13";
+             function = "i2c0";
+             drive-strength = <4>;
+         };
+     };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 145c5442f2..b5ca40d0e2 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -25,6 +25,7 @@ properties:
           - enum:
               - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
               - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+              - renesas,r9a08g045-pinctrl # RZ/G3S
 
       - items:
           - enum:
@@ -73,10 +74,26 @@ properties:
 additionalProperties:
   anyOf:
     - type: object
+      additionalProperties: false
       allOf:
         - $ref: pincfg-node.yaml#
         - $ref: pinmux-node.yaml#
 
+        - if:
+            properties:
+              compatible:
+                contains:
+                  enum:
+                    - renesas,r9a08g045-pinctrl
+          then:
+            properties:
+              drive-strength: false
+              output-impedance-ohms: false
+              slew-rate: false
+          else:
+            properties:
+              drive-strength-microamp: false
+
       description:
         Pin controller client devices use pin configuration subnodes (children
         and grandchildren) for desired pin configuration.
@@ -91,6 +108,10 @@ additionalProperties:
         pins: true
         drive-strength:
           enum: [ 2, 4, 8, 12 ]
+        drive-strength-microamp:
+          enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700,
+                  5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000,
+                  10000 ]
         output-impedance-ohms:
           enum: [ 33, 50, 66, 100 ]
         power-source:
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
index cb81a17bd0..5fa5d31f88 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -53,6 +53,7 @@ properties:
 additionalProperties:
   anyOf:
     - type: object
+      additionalProperties: false
       allOf:
         - $ref: pincfg-node.yaml#
         - $ref: pinmux-node.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 10c335efe6..20e806dce1 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -115,6 +115,8 @@ additionalProperties:
   type: object
   additionalProperties:
     type: object
+    additionalProperties: false
+
     properties:
       rockchip,pins:
         $ref: /schemas/types.yaml#/definitions/uint32-matrix
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 2120ef71a7..e1eb45a9ed 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -48,7 +48,8 @@ properties:
     description: Phandle+args to the syscon node which includes IRQ mux selection.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - items:
+      - minItems: 2
+        items:
           - description: syscon node which includes IRQ mux selection
           - description: The offset of the IRQ mux selection register
           - description: The field mask of IRQ mux, needed if different of 0xf