summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/cs53l30.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/devicetree/bindings/sound/cs53l30.txt
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/sound/cs53l30.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/cs53l30.txt44
1 files changed, 44 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/cs53l30.txt b/Documentation/devicetree/bindings/sound/cs53l30.txt
new file mode 100644
index 0000000000..dc256adb35
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs53l30.txt
@@ -0,0 +1,44 @@
+CS53L30 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs53l30"
+
+ - reg : the I2C address of the device
+
+ - VA-supply, VP-supply : power supplies for the device,
+ as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+ - reset-gpios : a GPIO spec for the reset pin.
+
+ - mute-gpios : a GPIO spec for the MUTE pin. The active state can be either
+ GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW, which would be handled
+ by the driver automatically.
+
+ - cirrus,micbias-lvl : Set the output voltage level on the MICBIAS Pin.
+ 0 = Hi-Z
+ 1 = 1.80 V
+ 2 = 2.75 V
+
+ - cirrus,use-sdout2 : This is a boolean property. If present, it indicates
+ the hardware design connects both SDOUT1 and SDOUT2
+ pins to output data. Otherwise, it indicates that
+ only SDOUT1 is connected for data output.
+ * CS53l30 supports 4-channel data output in the same
+ * frame using two different ways:
+ * 1) Normal I2S mode on two data pins -- each SDOUT
+ * carries 2-channel data in the same time.
+ * 2) TDM mode on one single data pin -- SDOUT1 carries
+ * 4-channel data per frame.
+
+Example:
+
+codec: cs53l30@48 {
+ compatible = "cirrus,cs53l30";
+ reg = <0x48>;
+ reset-gpios = <&gpio 54 0>;
+ VA-supply = <&cs53l30_va>;
+ VP-supply = <&cs53l30_vp>;
+};