summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/rt5677.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/devicetree/bindings/sound/rt5677.txt
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/sound/rt5677.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/rt5677.txt78
1 files changed, 78 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt
new file mode 100644
index 0000000000..da24300991
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/rt5677.txt
@@ -0,0 +1,78 @@
+RT5677 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5677".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+- gpio-controller : Indicates this device is a GPIO controller.
+
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+
+Optional properties:
+
+- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,lout1-differential
+- realtek,lout2-differential
+- realtek,lout3-differential
+ Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
+ rather than single-ended.
+
+- realtek,gpio-config
+ Array of six 8bit elements that configures GPIO.
+ 0 - floating (reset value)
+ 1 - pull down
+ 2 - pull up
+
+- realtek,jd1-gpio
+ Configures GPIO Mic Jack detection 1.
+ Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
+
+- realtek,jd2-gpio
+- realtek,jd3-gpio
+ Configures GPIO Mic Jack detection 2 and 3.
+ Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively.
+
+Pins on the device (for linking into audio routes):
+
+ * IN1P
+ * IN1N
+ * IN2P
+ * IN2N
+ * MICBIAS1
+ * DMIC1
+ * DMIC2
+ * DMIC3
+ * DMIC4
+ * LOUT1
+ * LOUT2
+ * LOUT3
+
+Example:
+
+rt5677 {
+ compatible = "realtek,rt5677";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ realtek,pow-ldo2-gpio =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+ realtek,in1-differential = "true";
+ realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */
+ realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */
+};