Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 287 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
new file mode 100644
index 0000000000..8f6136f5d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP USB2 ChipIdea USB controller
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx23-usb
+              - fsl,imx25-usb
+              - fsl,imx28-usb
+              - fsl,imx35-usb
+              - fsl,imx50-usb
+              - fsl,imx51-usb
+              - fsl,imx53-usb
+              - fsl,imx6q-usb
+              - fsl,imx6sl-usb
+              - fsl,imx6sx-usb
+              - fsl,imx6ul-usb
+              - fsl,imx7d-usb
+              - fsl,vf610-usb
+          - const: fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx8dxl-usb
+              - fsl,imx8ulp-usb
+          - const: fsl,imx7ulp-usb
+          - const: fsl,imx6ul-usb
+      - items:
+          - enum:
+              - fsl,imx8mm-usb
+              - fsl,imx8mn-usb
+              - fsl,imx93-usb
+          - const: fsl,imx7d-usb
+          - const: fsl,imx27-usb
+      - items:
+          - enum:
+              - fsl,imx6sll-usb
+              - fsl,imx7ulp-usb
+          - const: fsl,imx6ul-usb
+          - const: fsl,imx27-usb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  fsl,usbmisc:
+    description:
+      Phandler of non-core register device, with one argument that
+      indicate usb controller index
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to usbmisc node
+          - description: index of usb controller
+
+  disable-over-current:
+    type: boolean
+    description: disable over current detect
+
+  over-current-active-low:
+    type: boolean
+    description: over current signal polarity is active low
+
+  over-current-active-high:
+    type: boolean
+    description:
+      Over current signal polarity is active high. It's recommended to
+      specify the over current polarity.
+
+  power-active-high:
+    type: boolean
+    description: power signal polarity is active high
+
+  external-vbus-divider:
+    type: boolean
+    description: enables off-chip resistor divider for Vbus
+
+  samsung,picophy-pre-emp-curr-control:
+    description:
+      HS Transmitter Pre-Emphasis Current Control. This signal controls
+      the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
+      pins after a J-to-K or K-to-J transition. The range is from 0x0 to
+      0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
+      bits of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x3
+
+  samsung,picophy-dc-vol-level-adjust:
+    description:
+      HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
+      level voltage. The range is from 0x0 to 0xf, the default value is
+      0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+
+  fsl,picophy-rise-fall-time-adjust:
+    description:
+      HS Transmitter Rise/Fall Time Adjustment. Adjust the rise/fall times
+      of the high-speed transmitter waveform. It has no unit. The rise/fall
+      time will be increased or decreased by a certain percentage relative
+      to design default time. (0:-10%; 1:design default; 2:+15%; 3:+20%)
+      Details can refer to TXRISETUNE0 bit of USBNC_n_PHY_CFG1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    default: 1
+
+  fsl,usbphy:
+    description: phandle of usb phy that connects to the port. Use "phys" instead.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+required:
+  - compatible
+
+allOf:
+  - $ref: chipidea,usb2-common.yaml#
+  - if:
+      properties:
+        phy_type:
+          const: hsic
+      required:
+        - phy_type
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: idle
+            - const: active
+
+  # imx27 Soc needs three clocks
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx27-usb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: ipg
+            - const: ahb
+            - const: per
+
+  # imx25 and imx35 Soc need three clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx25-usb
+              - fsl,imx35-usb
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: ipg
+            - const: ahb
+            - const: per
+
+  # imx93 Soc needs two clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx93-usb
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl_root
+            - const: usb_wakeup
+
+  # imx7d Soc need one clock
+  - if:
+      properties:
+        compatible:
+          items:
+            - const: fsl,imx7d-usb
+            - const: fsl,imx27-usb
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+  # other Soc need one clock
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-usb
+              - fsl,imx28-usb
+              - fsl,imx50-usb
+              - fsl,imx51-usb
+              - fsl,imx53-usb
+              - fsl,imx6q-usb
+              - fsl,imx6sl-usb
+              - fsl,imx6sx-usb
+              - fsl,imx6ul-usb
+              - fsl,imx8mm-usb
+              - fsl,imx8mn-usb
+              - fsl,vf610-usb
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+
+    usb@30b10000 {
+        compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+        reg = <0x30b10000 0x200>;
+        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX7D_USB_CTRL_CLK>;
+        fsl,usbphy = <&usbphynop1>;
+        fsl,usbmisc = <&usbmisc1 0>;
+        phy-clkgate-delay-us = <400>;
+    };
+
+  # Example for HSIC:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    usb@2184400 {
+        compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+        reg = <0x02184400 0x200>;
+        interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_USBOH3>;
+        fsl,usbphy = <&usbphynop1>;
+        fsl,usbmisc = <&usbmisc 2>;
+        phy_type = "hsic";
+        dr_mode = "host";
+        ahb-burst-config = <0x0>;
+        tx-burst-size-dword = <0x10>;
+        rx-burst-size-dword = <0x10>;
+        pinctrl-names = "idle", "active";
+        pinctrl-0 = <&pinctrl_usbh2_idle>;
+        pinctrl-1 = <&pinctrl_usbh2_active>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9730";
+            reg = <1>;
+        };
+    };
+
+...