summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/smsc47b397.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/hwmon/smsc47b397.rst
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/hwmon/smsc47b397.rst')
-rw-r--r--Documentation/hwmon/smsc47b397.rst197
1 files changed, 197 insertions, 0 deletions
diff --git a/Documentation/hwmon/smsc47b397.rst b/Documentation/hwmon/smsc47b397.rst
new file mode 100644
index 0000000000..600194cf18
--- /dev/null
+++ b/Documentation/hwmon/smsc47b397.rst
@@ -0,0 +1,197 @@
+Kernel driver smsc47b397
+========================
+
+Supported chips:
+
+ * SMSC LPC47B397-NC
+
+ * SMSC SCH5307-NS
+
+ * SMSC SCH5317
+
+ Prefix: 'smsc47b397'
+
+ Addresses scanned: none, address read from Super I/O config space
+
+ Datasheet: In this file
+
+Authors:
+
+ - Mark M. Hoffman <mhoffman@lightlink.com>
+ - Utilitek Systems, Inc.
+
+November 23, 2004
+
+The following specification describes the SMSC LPC47B397-NC [1]_ sensor chip
+(for which there is no public datasheet available). This document was
+provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
+by Mark M. Hoffman <mhoffman@lightlink.com>.
+
+.. [1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are
+ otherwise compatible.
+
+-------------------------------------------------------------------------
+
+Methods for detecting the HP SIO and reading the thermal data on a dc7100
+-------------------------------------------------------------------------
+
+The thermal information on the dc7100 is contained in the SIO Hardware Monitor
+(HWM). The information is accessed through an index/data pair. The index/data
+pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
+HWM Base address can be obtained from Logical Device 8, registers 0x60 (MSB)
+and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
+0x480 and 0x481 for the index/data pair.
+
+Reading temperature information.
+The temperature information is located in the following registers:
+
+=============== ======= =======================================================
+Temp1 0x25 (Currently, this reflects the CPU temp on all systems).
+Temp2 0x26
+Temp3 0x27
+Temp4 0x80
+=============== ======= =======================================================
+
+Programming Example
+The following is an example of how to read the HWM temperature registers::
+
+ MOV DX,480H
+ MOV AX,25H
+ OUT DX,AL
+ MOV DX,481H
+ IN AL,DX
+
+AL contains the data in hex, the temperature in Celsius is the decimal
+equivalent.
+
+Ex: If AL contains 0x2A, the temperature is 42 degrees C.
+
+Reading tach information.
+The fan speed information is located in the following registers:
+
+=============== ======= ======= =================================
+ LSB MSB
+Tach1 0x28 0x29 (Currently, this reflects the CPU
+ fan speed on all systems).
+Tach2 0x2A 0x2B
+Tach3 0x2C 0x2D
+Tach4 0x2E 0x2F
+=============== ======= ======= =================================
+
+.. Important::
+
+ Reading the tach LSB locks the tach MSB.
+ The LSB Must be read first.
+
+How to convert the tach reading to RPM
+--------------------------------------
+
+The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
+The SIO counts the number of 90kHz (11.111us) pulses per revolution.
+RPM = 60/(TCount * 11.111us)
+
+Example::
+
+ Reg 0x28 = 0x9B
+ Reg 0x29 = 0x08
+
+TCount = 0x89B = 2203
+
+RPM = 60 / (2203 * 11.11111 E-6) = 2451 RPM
+
+Obtaining the SIO version.
+
+Configuration Sequence
+----------------------
+
+To program the configuration registers, the following sequence must be followed:
+1. Enter Configuration Mode
+2. Configure the Configuration Registers
+3. Exit Configuration Mode.
+
+Enter Configuration Mode
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+To place the chip into the Configuration State The config key (0x55) is written
+to the CONFIG PORT (0x2E).
+
+Configuration Mode
+^^^^^^^^^^^^^^^^^^
+
+In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
+the DATA PORT is at INDEX PORT address + 1.
+
+The desired configuration registers are accessed in two steps:
+
+a. Write the index of the Logical Device Number Configuration Register
+ (i.e., 0x07) to the INDEX PORT and then write the number of the
+ desired logical device to the DATA PORT.
+
+b. Write the address of the desired configuration register within the
+ logical device to the INDEX PORT and then write or read the config-
+ uration register through the DATA PORT.
+
+Note:
+ If accessing the Global Configuration Registers, step (a) is not required.
+
+Exit Configuration Mode
+^^^^^^^^^^^^^^^^^^^^^^^
+
+To exit the Configuration State the write 0xAA to the CONFIG PORT (0x2E).
+The chip returns to the RUN State. (This is important).
+
+Programming Example
+^^^^^^^^^^^^^^^^^^^
+
+The following is an example of how to read the SIO Device ID located at 0x20:
+
+ ; ENTER CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,055H
+ OUT DX,AL
+ ; GLOBAL CONFIGURATION REGISTER
+ MOV DX,02EH
+ MOV AL,20H
+ OUT DX,AL
+ ; READ THE DATA
+ MOV DX,02FH
+ IN AL,DX
+ ; EXIT CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,0AAH
+ OUT DX,AL
+
+The registers of interest for identifying the SIO on the dc7100 are Device ID
+(0x20) and Device Rev (0x21).
+
+The Device ID will read 0x6F (0x81 for SCH5307-NS, and 0x85 for SCH5317)
+The Device Rev currently reads 0x01
+
+Obtaining the HWM Base Address
+------------------------------
+
+The following is an example of how to read the HWM Base Address located in
+Logical Device 8::
+
+ ; ENTER CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,055H
+ OUT DX,AL
+ ; CONFIGURE REGISTER CRE0,
+ ; LOGICAL DEVICE 8
+ MOV DX,02EH
+ MOV AL,07H
+ OUT DX,AL ;Point to LD# Config Reg
+ MOV DX,02FH
+ MOV AL, 08H
+ OUT DX,AL;Point to Logical Device 8
+ ;
+ MOV DX,02EH
+ MOV AL,60H
+ OUT DX,AL ; Point to HWM Base Addr MSB
+ MOV DX,02FH
+ IN AL,DX ; Get MSB of HWM Base Addr
+ ; EXIT CONFIGURATION MODE
+ MOV DX,02EH
+ MOV AX,0AAH
+ OUT DX,AL