Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/leds/leds-cht-wcove.rst b/Documentation/leds/leds-cht-wcove.rst
new file mode 100644
index 0000000000..5ec7cb60c4
--- /dev/null
+++ b/Documentation/leds/leds-cht-wcove.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================
+Kernel driver for Intel Cherry Trail Whiskey Cove PMIC LEDs
+===========================================================
+
+/sys/class/leds/<led>/hw_pattern
+--------------------------------
+
+Specify a hardware pattern for the Whiskey Cove PMIC LEDs.
+
+The only supported pattern is hardware breathing mode::
+
+    "0 2000 1 2000"
+
+	^
+	|
+    Max-|     ---
+	|    /   \
+	|   /     \
+	|  /       \     /
+	| /         \   /
+    Min-|-           ---
+	|
+	0------2------4--> time (sec)
+
+The rise and fall times must be the same value.
+Supported values are 2000, 1000, 500 and 250 for
+breathing frequencies of 1/4, 1/2, 1 and 2 Hz.
+
+The set pattern only controls the timing. For max brightness the last
+set brightness is used and the max brightness can be changed
+while breathing by writing the brightness attribute.
+
+This is just like how blinking works in the LED subsystem,
+for both sw and hw blinking the brightness can also be changed
+while blinking. Breathing on this hw really is just a variant
+mode of blinking.