Merging upstream version 6.8.9.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

20 files changed, 101 insertions, 79 deletions

diff --git a/Documentation/userspace-api/media/cec/cec-api.rst b/Documentation/userspace-api/media/cec/cec-api.rst
index 4d229ed8a1..578303d484 100644
--- a/Documentation/userspace-api/media/cec/cec-api.rst
+++ b/Documentation/userspace-api/media/cec/cec-api.rst
@@ -10,13 +10,8 @@ Part V - Consumer Electronics Control API
 This part describes the CEC: Consumer Electronics Control
 
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst
index 1726f8ec86..2252063593 100644
--- a/Documentation/userspace-api/media/drivers/index.rst
+++ b/Documentation/userspace-api/media/drivers/index.rst
@@ -21,13 +21,8 @@ more details.
 
 For more details see the file COPYING in the source distribution of Linux.
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+	:caption: Table of Contents
 	:maxdepth: 5
 	:numbered:
 
@@ -41,4 +36,5 @@ For more details see the file COPYING in the source distribution of Linux.
 	npcm-video
 	omap3isp-uapi
 	st-vgxy61
+	thp7312
 	uvcvideo
diff --git a/Documentation/userspace-api/media/drivers/thp7312.rst b/Documentation/userspace-api/media/drivers/thp7312.rst
new file mode 100644
index 0000000000..7c777e6fb7
--- /dev/null
+++ b/Documentation/userspace-api/media/drivers/thp7312.rst
@@ -0,0 +1,39 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+THine THP7312 ISP driver
+========================
+
+The THP7312 driver implements the following driver-specific controls:
+
+``V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION``
+    Enable/Disable auto-adjustment, based on lighting conditions, of the frame
+    rate when auto-exposure is enabled.
+
+``V4L2_CID_THP7312_AUTO_FOCUS_METHOD``
+    Set method of auto-focus. Only takes effect when auto-focus is enabled.
+
+    .. flat-table::
+        :header-rows:  0
+        :stub-columns: 0
+        :widths:       1 4
+
+        * - ``0``
+          - Contrast-based auto-focus
+        * - ``1``
+          - PDAF
+        * - ``2``
+          - Hybrid of contrast-based and PDAF
+
+    Supported values for the control depend on the camera sensor module
+    connected to the THP7312. If the module doesn't have a focus lens actuator,
+    this control will not be exposed by the THP7312 driver. If the module has a
+    controllable focus lens but the sensor doesn't support PDAF, only the
+    contrast-based auto-focus value will be valid. Otherwise all values for the
+    controls will be supported.
+
+``V4L2_CID_THP7312_NOISE_REDUCTION_AUTO``
+    Enable/Disable auto noise reduction.
+
+``V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE``
+    Set the noise reduction strength, where 0 is the weakest and 10 is the
+    strongest.
diff --git a/Documentation/userspace-api/media/dvb/dvbapi.rst b/Documentation/userspace-api/media/dvb/dvbapi.rst
index 1dda69343f..4ac0c1bc54 100644
--- a/Documentation/userspace-api/media/dvb/dvbapi.rst
+++ b/Documentation/userspace-api/media/dvb/dvbapi.rst
@@ -27,13 +27,8 @@ Part II - Digital TV API
 
 **Version 5.10**
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git a/Documentation/userspace-api/media/index.rst b/Documentation/userspace-api/media/index.rst
index d839904be0..337ef6c7c4 100644
--- a/Documentation/userspace-api/media/index.rst
+++ b/Documentation/userspace-api/media/index.rst
@@ -21,13 +21,8 @@ Documentation/driver-api/media/index.rst
     media devices;
 
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 1
 
     intro
diff --git a/Documentation/userspace-api/media/mediactl/media-controller.rst b/Documentation/userspace-api/media/mediactl/media-controller.rst
index 508dd693bf..73a87f82f9 100644
--- a/Documentation/userspace-api/media/mediactl/media-controller.rst
+++ b/Documentation/userspace-api/media/mediactl/media-controller.rst
@@ -7,13 +7,8 @@
 Part IV - Media Controller API
 ##############################
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git a/Documentation/userspace-api/media/rc/remote_controllers.rst b/Documentation/userspace-api/media/rc/remote_controllers.rst
index f892918386..483f9ae92a 100644
--- a/Documentation/userspace-api/media/rc/remote_controllers.rst
+++ b/Documentation/userspace-api/media/rc/remote_controllers.rst
@@ -7,13 +7,8 @@
 Part III - Remote Controller API
 ################################
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :maxdepth: 5
     :numbered:
 
diff --git a/Documentation/userspace-api/media/v4l/v4l2.rst b/Documentation/userspace-api/media/v4l/v4l2.rst
index ad7a2bf0cf..cf8ae56a00 100644
--- a/Documentation/userspace-api/media/v4l/v4l2.rst
+++ b/Documentation/userspace-api/media/v4l/v4l2.rst
@@ -11,13 +11,8 @@ This part describes the Video for Linux API version 2 (V4L2 API) specification.
 
 **Revision 4.5**
 
-.. only:: html
-
-   .. class:: toc-title
-
-        Table of Contents
-
 .. toctree::
+    :caption: Table of Contents
     :numbered:
     :maxdepth: 5
 
diff --git a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
index a048a9f6b7..49232c9006 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-create-bufs.rst
@@ -116,9 +116,13 @@ than the number requested.
       - ``flags``
       - Specifies additional buffer management attributes.
 	See :ref:`memory-flags`.
-
     * - __u32
-      - ``reserved``\ [6]
+      - ``max_num_buffers``
+      - If the V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS capability flag is set
+        this field indicates the maximum possible number of buffers
+        for this queue.
+    * - __u32
+      - ``reserved``\ [5]
       - A place holder for future extensions. Drivers and applications
 	must set the array to zero.
 
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
index f9f73530a6..4d56c0528a 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -295,6 +295,14 @@ still cause this situation.
       - ``p_av1_film_grain``
       - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is
         of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
+    * - struct :c:type:`v4l2_ctrl_hdr10_cll_info` *
+      - ``p_hdr10_cll_info``
+      - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_cll_info`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_HDR10_CLL_INFO``.
+    * - struct :c:type:`v4l2_ctrl_hdr10_mastering_display` *
+      - ``p_hdr10_mastering_display``
+      - A pointer to a struct :c:type:`v4l2_ctrl_hdr10_mastering_display`. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY``.
     * - void *
       - ``ptr``
       - A pointer to a compound type which can be an N-dimensional array
diff --git a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
index 099fa66951..0b3a41a45d 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-reqbufs.rst
@@ -120,6 +120,7 @@ aborting or finishing any DMA in progress, an implicit
 .. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS:
 .. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF:
 .. _V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS:
+.. _V4L2-BUF-CAP-SUPPORTS-MAX-NUM-BUFFERS:
 
 .. raw:: latex
 
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
index 8def4c05d3..c935bacc3b 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-interval.rst
@@ -107,8 +107,7 @@ appropriately. The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_interval_enum`
-    ``pad`` references a non-existing pad, one of the ``code``,
-    ``width`` or ``height`` fields are invalid for the given pad or the
-    ``index`` field is out of bounds.
+    The struct :c:type:`v4l2_subdev_frame_interval_enum` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, one of the
+    ``code``, ``width`` or ``height`` fields are invalid for the given pad, or
+    the ``index`` field is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
index e3ae84df54..65f0cfeca9 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-frame-size.rst
@@ -126,7 +126,6 @@ appropriately. The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_size_enum`
-    ``pad`` references a non-existing pad, the ``code`` is invalid for
-    the given pad or the ``index`` field is out of bounds.
+    The struct :c:type:`v4l2_subdev_frame_size_enum` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, the ``code``
+    is invalid for the given pad, or the ``index`` field is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
index 4ad7dec27e..3050966b19 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-enum-mbus-code.rst
@@ -158,7 +158,6 @@ appropriately. The generic error codes are described at the
 :ref:`Generic Error Codes <gen-errors>` chapter.
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_mbus_code_enum`
-    ``pad`` references a non-existing pad, or the ``index`` field is out
-    of bounds.
+    The struct :c:type:`v4l2_subdev_mbus_code_enum` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, or the
+    ``index`` field is out of bounds.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
index 20f12a1cc0..810b6a859d 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-client-cap.rst
@@ -71,6 +71,11 @@ is unknown to the kernel.
         of 'stream' fields (referring to the stream number) with various
         ioctls. If this is not set (which is the default), the 'stream' fields
         will be forced to 0 by the kernel.
+    * - ``V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH``
+      - The client is aware of the :c:type:`v4l2_subdev_frame_interval`
+        ``which`` field. If this is not set (which is the default), the
+        ``which`` field is forced to ``V4L2_SUBDEV_FORMAT_ACTIVE`` by the
+        kernel.
 
 Return Value
 ============
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
index 1d267f7e79..92d933631f 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-crop.rst
@@ -118,10 +118,9 @@ EBUSY
     ``VIDIOC_SUBDEV_S_CROP``
 
 EINVAL
-    The struct :c:type:`v4l2_subdev_crop` ``pad``
-    references a non-existing pad, the ``which`` field references a
-    non-existing format, or cropping is not supported on the given
-    subdev pad.
+    The struct :c:type:`v4l2_subdev_crop` ``pad`` references a non-existing pad,
+    the ``which`` field has an unsupported value, or cropping is not supported
+    on the given subdev pad.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_CROP`` ioctl has been called on a read-only subdevice
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
index ed253a1e44..4a2b4e4f01 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst
@@ -140,9 +140,8 @@ EBUSY
     fix the problem first. Only returned by ``VIDIOC_SUBDEV_S_FMT``
 
 EINVAL
-    The struct :c:type:`v4l2_subdev_format`
-    ``pad`` references a non-existing pad, or the ``which`` field
-    references a non-existing format.
+    The struct :c:type:`v4l2_subdev_format` ``pad`` references a non-existing
+    pad, or the ``which`` field has an unsupported value.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_FMT`` ioctl has been called on a read-only subdevice
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
index 842f962d2a..c8022809ac 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-frame-interval.rst
@@ -58,8 +58,9 @@ struct
 contains the current frame interval as would be returned by a
 ``VIDIOC_SUBDEV_G_FRAME_INTERVAL`` call.
 
-Calling ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` on a subdev device node that has been
-registered in read-only mode is not allowed. An error is returned and the errno
+If the subdev device node has been registered in read-only mode, calls to
+``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` are only valid if the ``which`` field is set
+to ``V4L2_SUBDEV_FORMAT_TRY``, otherwise an error is returned and the errno
 variable is set to ``-EPERM``.
 
 Drivers must not return an error solely because the requested interval
@@ -93,7 +94,11 @@ the same sub-device is not defined.
       - ``stream``
       - Stream identifier.
     * - __u32
-      - ``reserved``\ [8]
+      - ``which``
+      - Active or try frame interval, from enum
+	:ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
+    * - __u32
+      - ``reserved``\ [7]
       - Reserved for future extensions. Applications and drivers must set
 	the array to zero.
 
@@ -112,11 +117,10 @@ EBUSY
     ``VIDIOC_SUBDEV_S_FRAME_INTERVAL``
 
 EINVAL
-    The struct
-    :c:type:`v4l2_subdev_frame_interval`
-    ``pad`` references a non-existing pad, or the pad doesn't support
-    frame intervals.
+    The struct :c:type:`v4l2_subdev_frame_interval` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, or the pad
+    doesn't support frame intervals.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_FRAME_INTERVAL`` ioctl has been called on a read-only
-    subdevice.
+    subdevice and the ``which`` field is set to ``V4L2_SUBDEV_FORMAT_ACTIVE``.
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
index 72677a280c..26b5004bfe 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
@@ -72,7 +72,7 @@ On a successful ``VIDIOC_SUBDEV_G_ROUTING`` call the driver updates the
 
     * - __u32
       - ``which``
-      - Format to modified, from enum
+      - Routing table to be accessed, from enum
         :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
     * - struct :c:type:`v4l2_subdev_route`
       - ``routes[]``
@@ -140,8 +140,9 @@ ENOSPC
    all the available routes the subdevice exposes.
 
 EINVAL
-   The sink or source pad identifiers reference a non-existing pad, or reference
-   pads of different types (ie. the sink_pad identifiers refers to a source pad).
+   The sink or source pad identifiers reference a non-existing pad or reference
+   pads of different types (ie. the sink_pad identifiers refers to a source
+   pad), or the ``which`` field has an unsupported value.
 
 E2BIG
    The application provided ``num_routes`` for ``VIDIOC_SUBDEV_S_ROUTING`` is
diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
index 6b629c1916..19e6c3e9c0 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-selection.rst
@@ -116,10 +116,9 @@ EBUSY
     ``VIDIOC_SUBDEV_S_SELECTION``
 
 EINVAL
-    The struct :c:type:`v4l2_subdev_selection`
-    ``pad`` references a non-existing pad, the ``which`` field
-    references a non-existing format, or the selection target is not
-    supported on the given subdev pad.
+    The struct :c:type:`v4l2_subdev_selection` ``pad`` references a
+    non-existing pad, the ``which`` field has an unsupported value, or the
+    selection target is not supported on the given subdev pad.
 
 EPERM
     The ``VIDIOC_SUBDEV_S_SELECTION`` ioctl has been called on a read-only