diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
| commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
| tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /Documentation/virt | |
| parent | Initial commit. (diff) | |
| download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip | |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/virt')
54 files changed, 17631 insertions, 0 deletions
diff --git a/Documentation/virt/acrn/cpuid.rst b/Documentation/virt/acrn/cpuid.rst new file mode 100644 index 0000000000..65fa4b9c17 --- /dev/null +++ b/Documentation/virt/acrn/cpuid.rst @@ -0,0 +1,46 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +ACRN CPUID bits +=============== + +A guest VM running on an ACRN hypervisor can check some of its features using +CPUID. + +ACRN cpuid functions are: + +function: 0x40000000 + +returns:: + + eax = 0x40000010 + ebx = 0x4e524341 + ecx = 0x4e524341 + edx = 0x4e524341 + +Note that this value in ebx, ecx and edx corresponds to the string +"ACRNACRNACRN". The value in eax corresponds to the maximum cpuid function +present in this leaf, and will be updated if more functions are added in the +future. + +function: define ACRN_CPUID_FEATURES (0x40000001) + +returns:: + + ebx, ecx, edx + eax = an OR'ed group of (1 << flag) + +where ``flag`` is defined as below: + +================================= =========== ================================ +flag value meaning +================================= =========== ================================ +ACRN_FEATURE_PRIVILEGED_VM 0 guest VM is a privileged VM +================================= =========== ================================ + +function: 0x40000010 + +returns:: + + ebx, ecx, edx + eax = (Virtual) TSC frequency in kHz. diff --git a/Documentation/virt/acrn/index.rst b/Documentation/virt/acrn/index.rst new file mode 100644 index 0000000000..b5f793e73d --- /dev/null +++ b/Documentation/virt/acrn/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +ACRN Hypervisor +=============== + +.. toctree:: + :maxdepth: 1 + + introduction + io-request + cpuid diff --git a/Documentation/virt/acrn/introduction.rst b/Documentation/virt/acrn/introduction.rst new file mode 100644 index 0000000000..f8d081bc08 --- /dev/null +++ b/Documentation/virt/acrn/introduction.rst @@ -0,0 +1,43 @@ +.. SPDX-License-Identifier: GPL-2.0 + +ACRN Hypervisor Introduction +============================ + +The ACRN Hypervisor is a Type 1 hypervisor, running directly on bare-metal +hardware. It has a privileged management VM, called Service VM, to manage User +VMs and do I/O emulation. + +ACRN userspace is an application running in the Service VM that emulates +devices for a User VM based on command line configurations. ACRN Hypervisor +Service Module (HSM) is a kernel module in the Service VM which provides +hypervisor services to the ACRN userspace. + +Below figure shows the architecture. + +:: + + Service VM User VM + +----------------------------+ | +------------------+ + | +--------------+ | | | | + | |ACRN userspace| | | | | + | +--------------+ | | | | + |-----------------ioctl------| | | | ... + |kernel space +----------+ | | | | + | | HSM | | | | Drivers | + | +----------+ | | | | + +--------------------|-------+ | +------------------+ + +---------------------hypercall----------------------------------------+ + | ACRN Hypervisor | + +----------------------------------------------------------------------+ + | Hardware | + +----------------------------------------------------------------------+ + +ACRN userspace allocates memory for the User VM, configures and initializes the +devices used by the User VM, loads the virtual bootloader, initializes the +virtual CPU state and handles I/O request accesses from the User VM. It uses +ioctls to communicate with the HSM. HSM implements hypervisor services by +interacting with the ACRN Hypervisor via hypercalls. HSM exports a char device +interface (/dev/acrn_hsm) to userspace. + +The ACRN hypervisor is open for contribution from anyone. The source repo is +available at https://github.com/projectacrn/acrn-hypervisor. diff --git a/Documentation/virt/acrn/io-request.rst b/Documentation/virt/acrn/io-request.rst new file mode 100644 index 0000000000..6cc3ea0fa1 --- /dev/null +++ b/Documentation/virt/acrn/io-request.rst @@ -0,0 +1,97 @@ +.. SPDX-License-Identifier: GPL-2.0 + +I/O request handling +==================== + +An I/O request of a User VM, which is constructed by the hypervisor, is +distributed by the ACRN Hypervisor Service Module to an I/O client +corresponding to the address range of the I/O request. Details of I/O request +handling are described in the following sections. + +1. I/O request +-------------- + +For each User VM, there is a shared 4-KByte memory region used for I/O requests +communication between the hypervisor and Service VM. An I/O request is a +256-byte structure buffer, which is 'struct acrn_io_request', that is filled by +an I/O handler of the hypervisor when a trapped I/O access happens in a User +VM. ACRN userspace in the Service VM first allocates a 4-KByte page and passes +the GPA (Guest Physical Address) of the buffer to the hypervisor. The buffer is +used as an array of 16 I/O request slots with each I/O request slot being 256 +bytes. This array is indexed by vCPU ID. + +2. I/O clients +-------------- + +An I/O client is responsible for handling User VM I/O requests whose accessed +GPA falls in a certain range. Multiple I/O clients can be associated with each +User VM. There is a special client associated with each User VM, called the +default client, that handles all I/O requests that do not fit into the range of +any other clients. The ACRN userspace acts as the default client for each User +VM. + +Below illustration shows the relationship between I/O requests shared buffer, +I/O requests and I/O clients. + +:: + + +------------------------------------------------------+ + | Service VM | + |+--------------------------------------------------+ | + || +----------------------------------------+ | | + || | shared page ACRN userspace | | | + || | +-----------------+ +------------+ | | | + || +----+->| acrn_io_request |<-+ default | | | | + || | | | +-----------------+ | I/O client | | | | + || | | | | ... | +------------+ | | | + || | | | +-----------------+ | | | + || | +-|--------------------------------------+ | | + ||---|----|-----------------------------------------| | + || | | kernel | | + || | | +----------------------+ | | + || | | | +-------------+ HSM | | | + || | +--------------+ | | | | + || | | | I/O clients | | | | + || | | | | | | | + || | | +-------------+ | | | + || | +----------------------+ | | + |+---|----------------------------------------------+ | + +----|-------------------------------------------------+ + | + +----|-------------------------------------------------+ + | +-+-----------+ | + | | I/O handler | ACRN Hypervisor | + | +-------------+ | + +------------------------------------------------------+ + +3. I/O request state transition +------------------------------- + +The state transitions of an ACRN I/O request are as follows. + +:: + + FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ... + +- FREE: this I/O request slot is empty +- PENDING: a valid I/O request is pending in this slot +- PROCESSING: the I/O request is being processed +- COMPLETE: the I/O request has been processed + +An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM and +ACRN userspace are in charge of processing the others. + +4. Processing flow of I/O requests +---------------------------------- + +a. The I/O handler of the hypervisor will fill an I/O request with PENDING + state when a trapped I/O access happens in a User VM. +b. The hypervisor makes an upcall, which is a notification interrupt, to + the Service VM. +c. The upcall handler schedules a worker to dispatch I/O requests. +d. The worker looks for the PENDING I/O requests, assigns them to different + registered clients based on the address of the I/O accesses, updates + their state to PROCESSING, and notifies the corresponding client to handle. +e. The notified client handles the assigned I/O requests. +f. The HSM updates I/O requests states to COMPLETE and notifies the hypervisor + of the completion via hypercalls. diff --git a/Documentation/virt/coco/sev-guest.rst b/Documentation/virt/coco/sev-guest.rst new file mode 100644 index 0000000000..68b0d2363a --- /dev/null +++ b/Documentation/virt/coco/sev-guest.rst @@ -0,0 +1,161 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================================================== +The Definitive SEV Guest API Documentation +=================================================================== + +1. General description +====================== + +The SEV API is a set of ioctls that are used by the guest or hypervisor +to get or set a certain aspect of the SEV virtual machine. The ioctls belong +to the following classes: + + - Hypervisor ioctls: These query and set global attributes which affect the + whole SEV firmware. These ioctl are used by platform provisioning tools. + + - Guest ioctls: These query and set attributes of the SEV virtual machine. + +2. API description +================== + +This section describes ioctls that is used for querying the SEV guest report +from the SEV firmware. For each ioctl, the following information is provided +along with a description: + + Technology: + which SEV technology provides this ioctl. SEV, SEV-ES, SEV-SNP or all. + + Type: + hypervisor or guest. The ioctl can be used inside the guest or the + hypervisor. + + Parameters: + what parameters are accepted by the ioctl. + + Returns: + the return value. General error numbers (-ENOMEM, -EINVAL) + are not detailed, but errors with specific meanings are. + +The guest ioctl should be issued on a file descriptor of the /dev/sev-guest +device. The ioctl accepts struct snp_user_guest_request. The input and +output structure is specified through the req_data and resp_data field +respectively. If the ioctl fails to execute due to a firmware error, then +the fw_error code will be set, otherwise fw_error will be set to -1. + +The firmware checks that the message sequence counter is one greater than +the guests message sequence counter. If guest driver fails to increment message +counter (e.g. counter overflow), then -EIO will be returned. + +:: + + struct snp_guest_request_ioctl { + /* Message version number */ + __u32 msg_version; + + /* Request and response structure address */ + __u64 req_data; + __u64 resp_data; + + /* bits[63:32]: VMM error code, bits[31:0] firmware error code (see psp-sev.h) */ + union { + __u64 exitinfo2; + struct { + __u32 fw_error; + __u32 vmm_error; + }; + }; + }; + +2.1 SNP_GET_REPORT +------------------ + +:Technology: sev-snp +:Type: guest ioctl +:Parameters (in): struct snp_report_req +:Returns (out): struct snp_report_resp on success, -negative on error + +The SNP_GET_REPORT ioctl can be used to query the attestation report from the +SEV-SNP firmware. The ioctl uses the SNP_GUEST_REQUEST (MSG_REPORT_REQ) command +provided by the SEV-SNP firmware to query the attestation report. + +On success, the snp_report_resp.data will contains the report. The report +contain the format described in the SEV-SNP specification. See the SEV-SNP +specification for further details. + +2.2 SNP_GET_DERIVED_KEY +----------------------- +:Technology: sev-snp +:Type: guest ioctl +:Parameters (in): struct snp_derived_key_req +:Returns (out): struct snp_derived_key_resp on success, -negative on error + +The SNP_GET_DERIVED_KEY ioctl can be used to get a key derive from a root key. +The derived key can be used by the guest for any purpose, such as sealing keys +or communicating with external entities. + +The ioctl uses the SNP_GUEST_REQUEST (MSG_KEY_REQ) command provided by the +SEV-SNP firmware to derive the key. See SEV-SNP specification for further details +on the various fields passed in the key derivation request. + +On success, the snp_derived_key_resp.data contains the derived key value. See +the SEV-SNP specification for further details. + + +2.3 SNP_GET_EXT_REPORT +---------------------- +:Technology: sev-snp +:Type: guest ioctl +:Parameters (in/out): struct snp_ext_report_req +:Returns (out): struct snp_report_resp on success, -negative on error + +The SNP_GET_EXT_REPORT ioctl is similar to the SNP_GET_REPORT. The difference is +related to the additional certificate data that is returned with the report. +The certificate data returned is being provided by the hypervisor through the +SNP_SET_EXT_CONFIG. + +The ioctl uses the SNP_GUEST_REQUEST (MSG_REPORT_REQ) command provided by the SEV-SNP +firmware to get the attestation report. + +On success, the snp_ext_report_resp.data will contain the attestation report +and snp_ext_report_req.certs_address will contain the certificate blob. If the +length of the blob is smaller than expected then snp_ext_report_req.certs_len will +be updated with the expected value. + +See GHCB specification for further detail on how to parse the certificate blob. + +3. SEV-SNP CPUID Enforcement +============================ + +SEV-SNP guests can access a special page that contains a table of CPUID values +that have been validated by the PSP as part of the SNP_LAUNCH_UPDATE firmware +command. It provides the following assurances regarding the validity of CPUID +values: + + - Its address is obtained via bootloader/firmware (via CC blob), and those + binaries will be measured as part of the SEV-SNP attestation report. + - Its initial state will be encrypted/pvalidated, so attempts to modify + it during run-time will result in garbage being written, or #VC exceptions + being generated due to changes in validation state if the hypervisor tries + to swap the backing page. + - Attempts to bypass PSP checks by the hypervisor by using a normal page, or + a non-CPUID encrypted page will change the measurement provided by the + SEV-SNP attestation report. + - The CPUID page contents are *not* measured, but attempts to modify the + expected contents of a CPUID page as part of guest initialization will be + gated by the PSP CPUID enforcement policy checks performed on the page + during SNP_LAUNCH_UPDATE, and noticeable later if the guest owner + implements their own checks of the CPUID values. + +It is important to note that this last assurance is only useful if the kernel +has taken care to make use of the SEV-SNP CPUID throughout all stages of boot. +Otherwise, guest owner attestation provides no assurance that the kernel wasn't +fed incorrect values at some point during boot. + + +Reference +--------- + +SEV-SNP and GHCB specification: developer.amd.com/sev + +The driver is based on SEV-SNP firmware spec 0.9 and GHCB spec version 2.0. diff --git a/Documentation/virt/coco/tdx-guest.rst b/Documentation/virt/coco/tdx-guest.rst new file mode 100644 index 0000000000..46e316db6b --- /dev/null +++ b/Documentation/virt/coco/tdx-guest.rst @@ -0,0 +1,52 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================================================== +TDX Guest API Documentation +=================================================================== + +1. General description +====================== + +The TDX guest driver exposes IOCTL interfaces via the /dev/tdx-guest misc +device to allow userspace to get certain TDX guest-specific details. + +2. API description +================== + +In this section, for each supported IOCTL, the following information is +provided along with a generic description. + +:Input parameters: Parameters passed to the IOCTL and related details. +:Output: Details about output data and return value (with details about + the non common error values). + +2.1 TDX_CMD_GET_REPORT0 +----------------------- + +:Input parameters: struct tdx_report_req +:Output: Upon successful execution, TDREPORT data is copied to + tdx_report_req.tdreport and return 0. Return -EINVAL for invalid + operands, -EIO on TDCALL failure or standard error number on other + common failures. + +The TDX_CMD_GET_REPORT0 IOCTL can be used by the attestation software to get +the TDREPORT0 (a.k.a. TDREPORT subtype 0) from the TDX module using +TDCALL[TDG.MR.REPORT]. + +A subtype index is added at the end of this IOCTL CMD to uniquely identify the +subtype-specific TDREPORT request. Although the subtype option is mentioned in +the TDX Module v1.0 specification, section titled "TDG.MR.REPORT", it is not +currently used, and it expects this value to be 0. So to keep the IOCTL +implementation simple, the subtype option was not included as part of the input +ABI. However, in the future, if the TDX Module supports more than one subtype, +a new IOCTL CMD will be created to handle it. To keep the IOCTL naming +consistent, a subtype index is added as part of the IOCTL CMD. + +Reference +--------- + +TDX reference material is collected here: + +https://www.intel.com/content/www/us/en/developer/articles/technical/intel-trust-domain-extensions.html + +The driver is based on TDX module specification v1.0 and TDX GHCI specification v1.0. diff --git a/Documentation/virt/guest-halt-polling.rst b/Documentation/virt/guest-halt-polling.rst new file mode 100644 index 0000000000..922291ddc4 --- /dev/null +++ b/Documentation/virt/guest-halt-polling.rst @@ -0,0 +1,84 @@ +================== +Guest halt polling +================== + +The cpuidle_haltpoll driver, with the haltpoll governor, allows +the guest vcpus to poll for a specified amount of time before +halting. + +This provides the following benefits to host side polling: + + 1) The POLL flag is set while polling is performed, which allows + a remote vCPU to avoid sending an IPI (and the associated + cost of handling the IPI) when performing a wakeup. + + 2) The VM-exit cost can be avoided. + +The downside of guest side polling is that polling is performed +even with other runnable tasks in the host. + +The basic logic as follows: A global value, guest_halt_poll_ns, +is configured by the user, indicating the maximum amount of +time polling is allowed. This value is fixed. + +Each vcpu has an adjustable guest_halt_poll_ns +("per-cpu guest_halt_poll_ns"), which is adjusted by the algorithm +in response to events (explained below). + +Module Parameters +================= + +The haltpoll governor has 5 tunable module parameters: + +1) guest_halt_poll_ns: + +Maximum amount of time, in nanoseconds, that polling is +performed before halting. + +Default: 200000 + +2) guest_halt_poll_shrink: + +Division factor used to shrink per-cpu guest_halt_poll_ns when +wakeup event occurs after the global guest_halt_poll_ns. + +Default: 2 + +3) guest_halt_poll_grow: + +Multiplication factor used to grow per-cpu guest_halt_poll_ns +when event occurs after per-cpu guest_halt_poll_ns +but before global guest_halt_poll_ns. + +Default: 2 + +4) guest_halt_poll_grow_start: + +The per-cpu guest_halt_poll_ns eventually reaches zero +in case of an idle system. This value sets the initial +per-cpu guest_halt_poll_ns when growing. This can +be increased from 10000, to avoid misses during the initial +growth stage: + +10k, 20k, 40k, ... (example assumes guest_halt_poll_grow=2). + +Default: 50000 + +5) guest_halt_poll_allow_shrink: + +Bool parameter which allows shrinking. Set to N +to avoid it (per-cpu guest_halt_poll_ns will remain +high once achieves global guest_halt_poll_ns value). + +Default: Y + +The module parameters can be set from the sysfs files in:: + + /sys/module/haltpoll/parameters/ + +Further Notes +============= + +- Care should be taken when setting the guest_halt_poll_ns parameter as a + large value has the potential to drive the cpu usage to 100% on a machine + which would be almost entirely idle otherwise. diff --git a/Documentation/virt/hyperv/clocks.rst b/Documentation/virt/hyperv/clocks.rst new file mode 100644 index 0000000000..a56f4837d4 --- /dev/null +++ b/Documentation/virt/hyperv/clocks.rst @@ -0,0 +1,73 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Clocks and Timers +================= + +arm64 +----- +On arm64, Hyper-V virtualizes the ARMv8 architectural system counter +and timer. Guest VMs use this virtualized hardware as the Linux +clocksource and clockevents via the standard arm_arch_timer.c +driver, just as they would on bare metal. Linux vDSO support for the +architectural system counter is functional in guest VMs on Hyper-V. +While Hyper-V also provides a synthetic system clock and four synthetic +per-CPU timers as described in the TLFS, they are not used by the +Linux kernel in a Hyper-V guest on arm64. However, older versions +of Hyper-V for arm64 only partially virtualize the ARMv8 +architectural timer, such that the timer does not generate +interrupts in the VM. Because of this limitation, running current +Linux kernel versions on these older Hyper-V versions requires an +out-of-tree patch to use the Hyper-V synthetic clocks/timers instead. + +x86/x64 +------- +On x86/x64, Hyper-V provides guest VMs with a synthetic system clock +and four synthetic per-CPU timers as described in the TLFS. Hyper-V +also provides access to the virtualized TSC via the RDTSC and +related instructions. These TSC instructions do not trap to +the hypervisor and so provide excellent performance in a VM. +Hyper-V performs TSC calibration, and provides the TSC frequency +to the guest VM via a synthetic MSR. Hyper-V initialization code +in Linux reads this MSR to get the frequency, so it skips TSC +calibration and sets tsc_reliable. Hyper-V provides virtualized +versions of the PIT (in Hyper-V Generation 1 VMs only), local +APIC timer, and RTC. Hyper-V does not provide a virtualized HPET in +guest VMs. + +The Hyper-V synthetic system clock can be read via a synthetic MSR, +but this access traps to the hypervisor. As a faster alternative, +the guest can configure a memory page to be shared between the guest +and the hypervisor. Hyper-V populates this memory page with a +64-bit scale value and offset value. To read the synthetic clock +value, the guest reads the TSC and then applies the scale and offset +as described in the Hyper-V TLFS. The resulting value advances +at a constant 10 MHz frequency. In the case of a live migration +to a host with a different TSC frequency, Hyper-V adjusts the +scale and offset values in the shared page so that the 10 MHz +frequency is maintained. + +Starting with Windows Server 2022 Hyper-V, Hyper-V uses hardware +support for TSC frequency scaling to enable live migration of VMs +across Hyper-V hosts where the TSC frequency may be different. +When a Linux guest detects that this Hyper-V functionality is +available, it prefers to use Linux's standard TSC-based clocksource. +Otherwise, it uses the clocksource for the Hyper-V synthetic system +clock implemented via the shared page (identified as +"hyperv_clocksource_tsc_page"). + +The Hyper-V synthetic system clock is available to user space via +vDSO, and gettimeofday() and related system calls can execute +entirely in user space. The vDSO is implemented by mapping the +shared page with scale and offset values into user space. User +space code performs the same algorithm of reading the TSC and +applying the scale and offset to get the constant 10 MHz clock. + +Linux clockevents are based on Hyper-V synthetic timer 0. While +Hyper-V offers 4 synthetic timers for each CPU, Linux only uses +timer 0. Interrupts from stimer0 are recorded on the "HVS" line in +/proc/interrupts. Clockevents based on the virtualized PIT and +local APIC timer also work, but the Hyper-V synthetic timer is +preferred. + +The driver for the Hyper-V synthetic system clock and timers is +drivers/clocksource/hyperv_timer.c. diff --git a/Documentation/virt/hyperv/index.rst b/Documentation/virt/hyperv/index.rst new file mode 100644 index 0000000000..4a7a1b738b --- /dev/null +++ b/Documentation/virt/hyperv/index.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Hyper-V Enlightenments +====================== + +.. toctree:: + :maxdepth: 1 + + overview + vmbus + clocks diff --git a/Documentation/virt/hyperv/overview.rst b/Documentation/virt/hyperv/overview.rst new file mode 100644 index 0000000000..cd493332c8 --- /dev/null +++ b/Documentation/virt/hyperv/overview.rst @@ -0,0 +1,207 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Overview +======== +The Linux kernel contains a variety of code for running as a fully +enlightened guest on Microsoft's Hyper-V hypervisor. Hyper-V +consists primarily of a bare-metal hypervisor plus a virtual machine +management service running in the parent partition (roughly +equivalent to KVM and QEMU, for example). Guest VMs run in child +partitions. In this documentation, references to Hyper-V usually +encompass both the hypervisor and the VMM service without making a +distinction about which functionality is provided by which +component. + +Hyper-V runs on x86/x64 and arm64 architectures, and Linux guests +are supported on both. The functionality and behavior of Hyper-V is +generally the same on both architectures unless noted otherwise. + +Linux Guest Communication with Hyper-V +-------------------------------------- +Linux guests communicate with Hyper-V in four different ways: + +* Implicit traps: As defined by the x86/x64 or arm64 architecture, + some guest actions trap to Hyper-V. Hyper-V emulates the action and + returns control to the guest. This behavior is generally invisible + to the Linux kernel. + +* Explicit hypercalls: Linux makes an explicit function call to + Hyper-V, passing parameters. Hyper-V performs the requested action + and returns control to the caller. Parameters are passed in + processor registers or in memory shared between the Linux guest and + Hyper-V. On x86/x64, hypercalls use a Hyper-V specific calling + sequence. On arm64, hypercalls use the ARM standard SMCCC calling + sequence. + +* Synthetic register access: Hyper-V implements a variety of + synthetic registers. On x86/x64 these registers appear as MSRs in + the guest, and the Linux kernel can read or write these MSRs using + the normal mechanisms defined by the x86/x64 architecture. On + arm64, these synthetic registers must be accessed using explicit + hypercalls. + +* VMbus: VMbus is a higher-level software construct that is built on + the other 3 mechanisms. It is a message passing interface between + the Hyper-V host and the Linux guest. It uses memory that is shared + between Hyper-V and the guest, along with various signaling + mechanisms. + +The first three communication mechanisms are documented in the +`Hyper-V Top Level Functional Spec (TLFS)`_. The TLFS describes +general Hyper-V functionality and provides details on the hypercalls +and synthetic registers. The TLFS is currently written for the +x86/x64 architecture only. + +.. _Hyper-V Top Level Functional Spec (TLFS): https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/tlfs/tlfs + +VMbus is not documented. This documentation provides a high-level +overview of VMbus and how it works, but the details can be discerned +only from the code. + +Sharing Memory +-------------- +Many aspects are communication between Hyper-V and Linux are based +on sharing memory. Such sharing is generally accomplished as +follows: + +* Linux allocates memory from its physical address space using + standard Linux mechanisms. + +* Linux tells Hyper-V the guest physical address (GPA) of the + allocated memory. Many shared areas are kept to 1 page so that a + single GPA is sufficient. Larger shared areas require a list of + GPAs, which usually do not need to be contiguous in the guest + physical address space. How Hyper-V is told about the GPA or list + of GPAs varies. In some cases, a single GPA is written to a + synthetic register. In other cases, a GPA or list of GPAs is sent + in a VMbus message. + +* Hyper-V translates the GPAs into "real" physical memory addresses, + and creates a virtual mapping that it can use to access the memory. + +* Linux can later revoke sharing it has previously established by + telling Hyper-V to set the shared GPA to zero. + +Hyper-V operates with a page size of 4 Kbytes. GPAs communicated to +Hyper-V may be in the form of page numbers, and always describe a +range of 4 Kbytes. Since the Linux guest page size on x86/x64 is +also 4 Kbytes, the mapping from guest page to Hyper-V page is 1-to-1. +On arm64, Hyper-V supports guests with 4/16/64 Kbyte pages as +defined by the arm64 architecture. If Linux is using 16 or 64 +Kbyte pages, Linux code must be careful to communicate with Hyper-V +only in terms of 4 Kbyte pages. HV_HYP_PAGE_SIZE and related macros +are used in code that communicates with Hyper-V so that it works +correctly in all configurations. + +As described in the TLFS, a few memory pages shared between Hyper-V +and the Linux guest are "overlay" pages. With overlay pages, Linux +uses the usual approach of allocating guest memory and telling +Hyper-V the GPA of the allocated memory. But Hyper-V then replaces +that physical memory page with a page it has allocated, and the +original physical memory page is no longer accessible in the guest +VM. Linux may access the memory normally as if it were the memory +that it originally allocated. The "overlay" behavior is visible +only because the contents of the page (as seen by Linux) change at +the time that Linux originally establishes the sharing and the +overlay page is inserted. Similarly, the contents change if Linux +revokes the sharing, in which case Hyper-V removes the overlay page, +and the guest page originally allocated by Linux becomes visible +again. + +Before Linux does a kexec to a kdump kernel or any other kernel, +memory shared with Hyper-V should be revoked. Hyper-V could modify +a shared page or remove an overlay page after the new kernel is +using the page for a different purpose, corrupting the new kernel. +Hyper-V does not provide a single "set everything" operation to +guest VMs, so Linux code must individually revoke all sharing before +doing kexec. See hv_kexec_handler() and hv_crash_handler(). But +the crash/panic path still has holes in cleanup because some shared +pages are set using per-CPU synthetic registers and there's no +mechanism to revoke the shared pages for CPUs other than the CPU +running the panic path. + +CPU Management +-------------- +Hyper-V does not have a ability to hot-add or hot-remove a CPU +from a running VM. However, Windows Server 2019 Hyper-V and +earlier versions may provide guests with ACPI tables that indicate +more CPUs than are actually present in the VM. As is normal, Linux +treats these additional CPUs as potential hot-add CPUs, and reports +them as such even though Hyper-V will never actually hot-add them. +Starting in Windows Server 2022 Hyper-V, the ACPI tables reflect +only the CPUs actually present in the VM, so Linux does not report +any hot-add CPUs. + +A Linux guest CPU may be taken offline using the normal Linux +mechanisms, provided no VMbus channel interrupts are assigned to +the CPU. See the section on VMbus Interrupts for more details +on how VMbus channel interrupts can be re-assigned to permit +taking a CPU offline. + +32-bit and 64-bit +----------------- +On x86/x64, Hyper-V supports 32-bit and 64-bit guests, and Linux +will build and run in either version. While the 32-bit version is +expected to work, it is used rarely and may suffer from undetected +regressions. + +On arm64, Hyper-V supports only 64-bit guests. + +Endian-ness +----------- +All communication between Hyper-V and guest VMs uses Little-Endian +format on both x86/x64 and arm64. Big-endian format on arm64 is not +supported by Hyper-V, and Linux code does not use endian-ness macros +when accessing data shared with Hyper-V. + +Versioning +---------- +Current Linux kernels operate correctly with older versions of +Hyper-V back to Windows Server 2012 Hyper-V. Support for running +on the original Hyper-V release in Windows Server 2008/2008 R2 +has been removed. + +A Linux guest on Hyper-V outputs in dmesg the version of Hyper-V +it is running on. This version is in the form of a Windows build +number and is for display purposes only. Linux code does not +test this version number at runtime to determine available features +and functionality. Hyper-V indicates feature/function availability +via flags in synthetic MSRs that Hyper-V provides to the guest, +and the guest code tests these flags. + +VMbus has its own protocol version that is negotiated during the +initial VMbus connection from the guest to Hyper-V. This version +number is also output to dmesg during boot. This version number +is checked in a few places in the code to determine if specific +functionality is present. + +Furthermore, each synthetic device on VMbus also has a protocol +version that is separate from the VMbus protocol version. Device +drivers for these synthetic devices typically negotiate the device +protocol version, and may test that protocol version to determine +if specific device functionality is present. + +Code Packaging +-------------- +Hyper-V related code appears in the Linux kernel code tree in three +main areas: + +1. drivers/hv + +2. arch/x86/hyperv and arch/arm64/hyperv + +3. individual device driver areas such as drivers/scsi, drivers/net, + drivers/clocksource, etc. + +A few miscellaneous files appear elsewhere. See the full list under +"Hyper-V/Azure CORE AND DRIVERS" and "DRM DRIVER FOR HYPERV +SYNTHETIC VIDEO DEVICE" in the MAINTAINERS file. + +The code in #1 and #2 is built only when CONFIG_HYPERV is set. +Similarly, the code for most Hyper-V related drivers is built only +when CONFIG_HYPERV is set. + +Most Hyper-V related code in #1 and #3 can be built as a module. +The architecture specific code in #2 must be built-in. Also, +drivers/hv/hv_common.c is low-level code that is common across +architectures and must be built-in. diff --git a/Documentation/virt/hyperv/vmbus.rst b/Documentation/virt/hyperv/vmbus.rst new file mode 100644 index 0000000000..d2012d9022 --- /dev/null +++ b/Documentation/virt/hyperv/vmbus.rst @@ -0,0 +1,303 @@ +.. SPDX-License-Identifier: GPL-2.0 + +VMbus +===== +VMbus is a software construct provided by Hyper-V to guest VMs. It +consists of a control path and common facilities used by synthetic +devices that Hyper-V presents to guest VMs. The control path is +used to offer synthetic devices to the guest VM and, in some cases, +to rescind those devices. The common facilities include software +channels for communicating between the device driver in the guest VM +and the synthetic device implementation that is part of Hyper-V, and +signaling primitives to allow Hyper-V and the guest to interrupt +each other. + +VMbus is modeled in Linux as a bus, with the expected /sys/bus/vmbus +entry in a running Linux guest. The VMbus driver (drivers/hv/vmbus_drv.c) +establishes the VMbus control path with the Hyper-V host, then +registers itself as a Linux bus driver. It implements the standard +bus functions for adding and removing devices to/from the bus. + +Most synthetic devices offered by Hyper-V have a corresponding Linux +device driver. These devices include: + +* SCSI controller +* NIC +* Graphics frame buffer +* Keyboard +* Mouse +* PCI device pass-thru +* Heartbeat +* Time Sync +* Shutdown +* Memory balloon +* Key/Value Pair (KVP) exchange with Hyper-V +* Hyper-V online backup (a.k.a. VSS) + +Guest VMs may have multiple instances of the synthetic SCSI +controller, synthetic NIC, and PCI pass-thru devices. Other +synthetic devices are limited to a single instance per VM. Not +listed above are a small number of synthetic devices offered by +Hyper-V that are used only by Windows guests and for which Linux +does not have a driver. + +Hyper-V uses the terms "VSP" and "VSC" in describing synthetic +devices. "VSP" refers to the Hyper-V code that implements a +particular synthetic device, while "VSC" refers to the driver for +the device in the guest VM. For example, the Linux driver for the +synthetic NIC is referred to as "netvsc" and the Linux driver for +the synthetic SCSI controller is "storvsc". These drivers contain +functions with names like "storvsc_connect_to_vsp". + +VMbus channels +-------------- +An instance of a synthetic device uses VMbus channels to communicate +between the VSP and the VSC. Channels are bi-directional and used +for passing messages. Most synthetic devices use a single channel, +but the synthetic SCSI controller and synthetic NIC may use multiple +channels to achieve higher performance and greater parallelism. + +Each channel consists of two ring buffers. These are classic ring +buffers from a university data structures textbook. If the read +and writes pointers are equal, the ring buffer is considered to be +empty, so a full ring buffer always has at least one byte unused. +The "in" ring buffer is for messages from the Hyper-V host to the +guest, and the "out" ring buffer is for messages from the guest to +the Hyper-V host. In Linux, the "in" and "out" designations are as +viewed by the guest side. The ring buffers are memory that is +shared between the guest and the host, and they follow the standard +paradigm where the memory is allocated by the guest, with the list +of GPAs that make up the ring buffer communicated to the host. Each +ring buffer consists of a header page (4 Kbytes) with the read and +write indices and some control flags, followed by the memory for the +actual ring. The size of the ring is determined by the VSC in the +guest and is specific to each synthetic device. The list of GPAs +making up the ring is communicated to the Hyper-V host over the +VMbus control path as a GPA Descriptor List (GPADL). See function +vmbus_establish_gpadl(). + +Each ring buffer is mapped into contiguous Linux kernel virtual +space in three parts: 1) the 4 Kbyte header page, 2) the memory +that makes up the ring itself, and 3) a second mapping of the memory +that makes up the ring itself. Because (2) and (3) are contiguous +in kernel virtual space, the code that copies data to and from the +ring buffer need not be concerned with ring buffer wrap-around. +Once a copy operation has completed, the read or write index may +need to be reset to point back into the first mapping, but the +actual data copy does not need to be broken into two parts. This +approach also allows complex data structures to be easily accessed +directly in the ring without handling wrap-around. + +On arm64 with page sizes > 4 Kbytes, the header page must still be +passed to Hyper-V as a 4 Kbyte area. But the memory for the actual +ring must be aligned to PAGE_SIZE and have a size that is a multiple +of PAGE_SIZE so that the duplicate mapping trick can be done. Hence +a portion of the header page is unused and not communicated to +Hyper-V. This case is handled by vmbus_establish_gpadl(). + +Hyper-V enforces a limit on the aggregate amount of guest memory +that can be shared with the host via GPADLs. This limit ensures +that a rogue guest can't force the consumption of excessive host +resources. For Windows Server 2019 and later, this limit is +approximately 1280 Mbytes. For versions prior to Windows Server +2019, the limit is approximately 384 Mbytes. + +VMbus messages +-------------- +All VMbus messages have a standard header that includes the message +length, the offset of the message payload, some flags, and a +transactionID. The portion of the message after the header is +unique to each VSP/VSC pair. + +Messages follow one of two patterns: + +* Unidirectional: Either side sends a message and does not + expect a response message +* Request/response: One side (usually the guest) sends a message + and expects a response + +The transactionID (a.k.a. "requestID") is for matching requests & +responses. Some synthetic devices allow multiple requests to be in- +flight simultaneously, so the guest specifies a transactionID when +sending a request. Hyper-V sends back the same transactionID in the +matching response. + +Messages passed between the VSP and VSC are control messages. For +example, a message sent from the storvsc driver might be "execute +this SCSI command". If a message also implies some data transfer +between the guest and the Hyper-V host, the actual data to be +transferred may be embedded with the control message, or it may be +specified as a separate data buffer that the Hyper-V host will +access as a DMA operation. The former case is used when the size of +the data is small and the cost of copying the data to and from the +ring buffer is minimal. For example, time sync messages from the +Hyper-V host to the guest contain the actual time value. When the +data is larger, a separate data buffer is used. In this case, the +control message contains a list of GPAs that describe the data +buffer. For example, the storvsc driver uses this approach to +specify the data buffers to/from which disk I/O is done. + +Three functions exist to send VMbus messages: + +1. vmbus_sendpacket(): Control-only messages and messages with + embedded data -- no GPAs +2. vmbus_sendpacket_pagebuffer(): Message with list of GPAs + identifying data to transfer. An offset and length is + associated with each GPA so that multiple discontinuous areas + of guest memory can be targeted. +3. vmbus_sendpacket_mpb_desc(): Message with list of GPAs + identifying data to transfer. A single offset and length is + associated with a list of GPAs. The GPAs must describe a + single logical area of guest memory to be targeted. + +Historically, Linux guests have trusted Hyper-V to send well-formed +and valid messages, and Linux drivers for synthetic devices did not +fully validate messages. With the introduction of processor +technologies that fully encrypt guest memory and that allow the +guest to not trust the hypervisor (AMD SNP-SEV, Intel TDX), trusting +the Hyper-V host is no longer a valid assumption. The drivers for +VMbus synthetic devices are being updated to fully validate any +values read from memory that is shared with Hyper-V, which includes +messages from VMbus devices. To facilitate such validation, +messages read by the guest from the "in" ring buffer are copied to a +temporary buffer that is not shared with Hyper-V. Validation is +performed in this temporary buffer without the risk of Hyper-V +maliciously modifying the message after it is validated but before +it is used. + +VMbus interrupts +---------------- +VMbus provides a mechanism for the guest to interrupt the host when +the guest has queued new messages in a ring buffer. The host +expects that the guest will send an interrupt only when an "out" +ring buffer transitions from empty to non-empty. If the guest sends +interrupts at other times, the host deems such interrupts to be +unnecessary. If a guest sends an excessive number of unnecessary +interrupts, the host may throttle that guest by suspending its +execution for a few seconds to prevent a denial-of-service attack. + +Similarly, the host will interrupt the guest when it sends a new +message on the VMbus control path, or when a VMbus channel "in" ring +buffer transitions from empty to non-empty. Each CPU in the guest +may receive VMbus interrupts, so they are best modeled as per-CPU +interrupts in Linux. This model works well on arm64 where a single +per-CPU IRQ is allocated for VMbus. Since x86/x64 lacks support for +per-CPU IRQs, an x86 interrupt vector is statically allocated (see +HYPERVISOR_CALLBACK_VECTOR) across all CPUs and explicitly coded to +call the VMbus interrupt service routine. These interrupts are +visible in /proc/interrupts on the "HYP" line. + +The guest CPU that a VMbus channel will interrupt is selected by the +guest when the channel is created, and the host is informed of that +selection. VMbus devices are broadly grouped into two categories: + +1. "Slow" devices that need only one VMbus channel. The devices + (such as keyboard, mouse, heartbeat, and timesync) generate + relatively few interrupts. Their VMbus channels are all + assigned to interrupt the VMBUS_CONNECT_CPU, which is always + CPU 0. + +2. "High speed" devices that may use multiple VMbus channels for + higher parallelism and performance. These devices include the + synthetic SCSI controller and synthetic NIC. Their VMbus + channels interrupts are assigned to CPUs that are spread out + among the available CPUs in the VM so that interrupts on + multiple channels can be processed in parallel. + +The assignment of VMbus channel interrupts to CPUs is done in the +function init_vp_index(). This assignment is done outside of the +normal Linux interrupt affinity mechanism, so the interrupts are +neither "unmanaged" nor "managed" interrupts. + +The CPU that a VMbus channel will interrupt can be seen in +/sys/bus/vmbus/devices/<deviceGUID>/ channels/<channelRelID>/cpu. +When running on later versions of Hyper-V, the CPU can be changed +by writing a new value to this sysfs entry. Because the interrupt +assignment is done outside of the normal Linux affinity mechanism, +there are no entries in /proc/irq corresponding to individual +VMbus channel interrupts. + +An online CPU in a Linux guest may not be taken offline if it has +VMbus channel interrupts assigned to it. Any such channel +interrupts must first be manually reassigned to another CPU as +described above. When no channel interrupts are assigned to the +CPU, it can be taken offline. + +When a guest CPU receives a VMbus interrupt from the host, the +function vmbus_isr() handles the interrupt. It first checks for +channel interrupts by calling vmbus_chan_sched(), which looks at a +bitmap setup by the host to determine which channels have pending +interrupts on this CPU. If multiple channels have pending +interrupts for this CPU, they are processed sequentially. When all +channel interrupts have been processed, vmbus_isr() checks for and +processes any message received on the VMbus control path. + +The VMbus channel interrupt handling code is designed to work +correctly even if an interrupt is received on a CPU other than the +CPU assigned to the channel. Specifically, the code does not use +CPU-based exclusion for correctness. In normal operation, Hyper-V +will interrupt the assigned CPU. But when the CPU assigned to a +channel is being changed via sysfs, the guest doesn't know exactly +when Hyper-V will make the transition. The code must work correctly +even if there is a time lag before Hyper-V starts interrupting the +new CPU. See comments in target_cpu_store(). + +VMbus device creation/deletion +------------------------------ +Hyper-V and the Linux guest have a separate message-passing path +that is used for synthetic device creation and deletion. This +path does not use a VMbus channel. See vmbus_post_msg() and +vmbus_on_msg_dpc(). + +The first step is for the guest to connect to the generic +Hyper-V VMbus mechanism. As part of establishing this connection, +the guest and Hyper-V agree on a VMbus protocol version they will +use. This negotiation allows newer Linux kernels to run on older +Hyper-V versions, and vice versa. + +The guest then tells Hyper-V to "send offers". Hyper-V sends an +offer message to the guest for each synthetic device that the VM +is configured to have. Each VMbus device type has a fixed GUID +known as the "class ID", and each VMbus device instance is also +identified by a GUID. The offer message from Hyper-V contains +both GUIDs to uniquely (within the VM) identify the device. +There is one offer message for each device instance, so a VM with +two synthetic NICs will get two offers messages with the NIC +class ID. The ordering of offer messages can vary from boot-to-boot +and must not be assumed to be consistent in Linux code. Offer +messages may also arrive long after Linux has initially booted +because Hyper-V supports adding devices, such as synthetic NICs, +to running VMs. A new offer message is processed by +vmbus_process_offer(), which indirectly invokes vmbus_add_channel_work(). + +Upon receipt of an offer message, the guest identifies the device +type based on the class ID, and invokes the correct driver to set up +the device. Driver/device matching is performed using the standard +Linux mechanism. + +The device driver probe function opens the primary VMbus channel to +the corresponding VSP. It allocates guest memory for the channel +ring buffers and shares the ring buffer with the Hyper-V host by +giving the host a list of GPAs for the ring buffer memory. See +vmbus_establish_gpadl(). + +Once the ring buffer is set up, the device driver and VSP exchange +setup messages via the primary channel. These messages may include +negotiating the device protocol version to be used between the Linux +VSC and the VSP on the Hyper-V host. The setup messages may also +include creating additional VMbus channels, which are somewhat +mis-named as "sub-channels" since they are functionally +equivalent to the primary channel once they are created. + +Finally, the device driver may create entries in /dev as with +any device driver. + +The Hyper-V host can send a "rescind" message to the guest to +remove a device that was previously offered. Linux drivers must +handle such a rescind message at any time. Rescinding a device +invokes the device driver "remove" function to cleanly shut +down the device and remove it. Once a synthetic device is +rescinded, neither Hyper-V nor Linux retains any state about +its previous existence. Such a device might be re-added later, +in which case it is treated as an entirely new device. See +vmbus_onoffer_rescind(). diff --git a/Documentation/virt/index.rst b/Documentation/virt/index.rst new file mode 100644 index 0000000000..7fb55ae085 --- /dev/null +++ b/Documentation/virt/index.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Virtualization Support +====================== + +.. toctree:: + :maxdepth: 2 + + kvm/index + uml/user_mode_linux_howto_v2 + paravirt_ops + guest-halt-polling + ne_overview + acrn/index + coco/sev-guest + coco/tdx-guest + hyperv/index + +.. only:: html and subproject + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst new file mode 100644 index 0000000000..21a7578142 --- /dev/null +++ b/Documentation/virt/kvm/api.rst @@ -0,0 +1,8535 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================================================== +The Definitive KVM (Kernel-based Virtual Machine) API Documentation +=================================================================== + +1. General description +====================== + +The kvm API is a set of ioctls that are issued to control various aspects +of a virtual machine. The ioctls belong to the following classes: + + - System ioctls: These query and set global attributes which affect the + whole kvm subsystem. In addition a system ioctl is used to create + virtual machines. + + - VM ioctls: These query and set attributes that affect an entire virtual + machine, for example memory layout. In addition a VM ioctl is used to + create virtual cpus (vcpus) and devices. + + VM ioctls must be issued from the same process (address space) that was + used to create the VM. + + - vcpu ioctls: These query and set attributes that control the operation + of a single virtual cpu. + + vcpu ioctls should be issued from the same thread that was used to create + the vcpu, except for asynchronous vcpu ioctl that are marked as such in + the documentation. Otherwise, the first ioctl after switching threads + could see a performance impact. + + - device ioctls: These query and set attributes that control the operation + of a single device. + + device ioctls must be issued from the same process (address space) that + was used to create the VM. + +2. File descriptors +=================== + +The kvm API is centered around file descriptors. An initial +open("/dev/kvm") obtains a handle to the kvm subsystem; this handle +can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this +handle will create a VM file descriptor which can be used to issue VM +ioctls. A KVM_CREATE_VCPU or KVM_CREATE_DEVICE ioctl on a VM fd will +create a virtual cpu or device and return a file descriptor pointing to +the new resource. Finally, ioctls on a vcpu or device fd can be used +to control the vcpu or device. For vcpus, this includes the important +task of actually running guest code. + +In general file descriptors can be migrated among processes by means +of fork() and the SCM_RIGHTS facility of unix domain socket. These +kinds of tricks are explicitly not supported by kvm. While they will +not cause harm to the host, their actual behavior is not guaranteed by +the API. See "General description" for details on the ioctl usage +model that is supported by KVM. + +It is important to note that although VM ioctls may only be issued from +the process that created the VM, a VM's lifecycle is associated with its +file descriptor, not its creator (process). In other words, the VM and +its resources, *including the associated address space*, are not freed +until the last reference to the VM's file descriptor has been released. +For example, if fork() is issued after ioctl(KVM_CREATE_VM), the VM will +not be freed until both the parent (original) process and its child have +put their references to the VM's file descriptor. + +Because a VM's resources are not freed until the last reference to its +file descriptor is released, creating additional references to a VM +via fork(), dup(), etc... without careful consideration is strongly +discouraged and may have unwanted side effects, e.g. memory allocated +by and on behalf of the VM's process may not be freed/unaccounted when +the VM is shut down. + + +3. Extensions +============= + +As of Linux 2.6.22, the KVM ABI has been stabilized: no backward +incompatible change are allowed. However, there is an extension +facility that allows backward-compatible extensions to the API to be +queried and used. + +The extension mechanism is not based on the Linux version number. +Instead, kvm defines extension identifiers and a facility to query +whether a particular extension identifier is available. If it is, a +set of ioctls is available for application use. + + +4. API description +================== + +This section describes ioctls that can be used to control kvm guests. +For each ioctl, the following information is provided along with a +description: + + Capability: + which KVM extension provides this ioctl. Can be 'basic', + which means that is will be provided by any kernel that supports + API version 12 (see section 4.1), a KVM_CAP_xyz constant, which + means availability needs to be checked with KVM_CHECK_EXTENSION + (see section 4.4), or 'none' which means that while not all kernels + support this ioctl, there's no capability bit to check its + availability: for kernels that don't support the ioctl, + the ioctl returns -ENOTTY. + + Architectures: + which instruction set architectures provide this ioctl. + x86 includes both i386 and x86_64. + + Type: + system, vm, or vcpu. + + Parameters: + what parameters are accepted by the ioctl. + + Returns: + the return value. General error numbers (EBADF, ENOMEM, EINVAL) + are not detailed, but errors with specific meanings are. + + +4.1 KVM_GET_API_VERSION +----------------------- + +:Capability: basic +:Architectures: all +:Type: system ioctl +:Parameters: none +:Returns: the constant KVM_API_VERSION (=12) + +This identifies the API version as the stable kvm API. It is not +expected that this number will change. However, Linux 2.6.20 and +2.6.21 report earlier versions; these are not documented and not +supported. Applications should refuse to run if KVM_GET_API_VERSION +returns a value other than 12. If this check passes, all ioctls +described as 'basic' will be available. + + +4.2 KVM_CREATE_VM +----------------- + +:Capability: basic +:Architectures: all +:Type: system ioctl +:Parameters: machine type identifier (KVM_VM_*) +:Returns: a VM fd that can be used to control the new virtual machine. + +The new VM has no virtual cpus and no memory. +You probably want to use 0 as machine type. + +In order to create user controlled virtual machines on S390, check +KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as +privileged user (CAP_SYS_ADMIN). + +On arm64, the physical address size for a VM (IPA Size limit) is limited +to 40bits by default. The limit can be configured if the host supports the +extension KVM_CAP_ARM_VM_IPA_SIZE. When supported, use +KVM_VM_TYPE_ARM_IPA_SIZE(IPA_Bits) to set the size in the machine type +identifier, where IPA_Bits is the maximum width of any physical +address used by the VM. The IPA_Bits is encoded in bits[7-0] of the +machine type identifier. + +e.g, to configure a guest to use 48bit physical address size:: + + vm_fd = ioctl(dev_fd, KVM_CREATE_VM, KVM_VM_TYPE_ARM_IPA_SIZE(48)); + +The requested size (IPA_Bits) must be: + + == ========================================================= + 0 Implies default size, 40bits (for backward compatibility) + N Implies N bits, where N is a positive integer such that, + 32 <= N <= Host_IPA_Limit + == ========================================================= + +Host_IPA_Limit is the maximum possible value for IPA_Bits on the host and +is dependent on the CPU capability and the kernel configuration. The limit can +be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION +ioctl() at run-time. + +Creation of the VM will fail if the requested IPA size (whether it is +implicit or explicit) is unsupported on the host. + +Please note that configuring the IPA size does not affect the capability +exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects +size of the address translated by the stage2 level (guest physical to +host physical address translations). + + +4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST +---------------------------------------------------------- + +:Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST +:Architectures: x86 +:Type: system ioctl +:Parameters: struct kvm_msr_list (in/out) +:Returns: 0 on success; -1 on error + +Errors: + + ====== ============================================================ + EFAULT the msr index list cannot be read from or written to + E2BIG the msr index list is too big to fit in the array specified by + the user. + ====== ============================================================ + +:: + + struct kvm_msr_list { + __u32 nmsrs; /* number of msrs in entries */ + __u32 indices[0]; + }; + +The user fills in the size of the indices array in nmsrs, and in return +kvm adjusts nmsrs to reflect the actual number of msrs and fills in the +indices array with their numbers. + +KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported. The list +varies by kvm version and host processor, but does not change otherwise. + +Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are +not returned in the MSR list, as different vcpus can have a different number +of banks, as set via the KVM_X86_SETUP_MCE ioctl. + +KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed +to the KVM_GET_MSRS system ioctl. This lets userspace probe host capabilities +and processor features that are exposed via MSRs (e.g., VMX capabilities). +This list also varies by kvm version and host processor, but does not change +otherwise. + + +4.4 KVM_CHECK_EXTENSION +----------------------- + +:Capability: basic, KVM_CAP_CHECK_EXTENSION_VM for vm ioctl +:Architectures: all +:Type: system ioctl, vm ioctl +:Parameters: extension identifier (KVM_CAP_*) +:Returns: 0 if unsupported; 1 (or some other positive integer) if supported + +The API allows the application to query about extensions to the core +kvm API. Userspace passes an extension identifier (an integer) and +receives an integer that describes the extension availability. +Generally 0 means no and 1 means yes, but some extensions may report +additional information in the integer return value. + +Based on their initialization different VMs may have different capabilities. +It is thus encouraged to use the vm ioctl to query for capabilities (available +with KVM_CAP_CHECK_EXTENSION_VM on the vm fd) + +4.5 KVM_GET_VCPU_MMAP_SIZE +-------------------------- + +:Capability: basic +:Architectures: all +:Type: system ioctl +:Parameters: none +:Returns: size of vcpu mmap area, in bytes + +The KVM_RUN ioctl (cf.) communicates with userspace via a shared +memory region. This ioctl returns the size of that region. See the +KVM_RUN documentation for details. + +Besides the size of the KVM_RUN communication region, other areas of +the VCPU file descriptor can be mmap-ed, including: + +- if KVM_CAP_COALESCED_MMIO is available, a page at + KVM_COALESCED_MMIO_PAGE_OFFSET * PAGE_SIZE; for historical reasons, + this page is included in the result of KVM_GET_VCPU_MMAP_SIZE. + KVM_CAP_COALESCED_MMIO is not documented yet. + +- if KVM_CAP_DIRTY_LOG_RING is available, a number of pages at + KVM_DIRTY_LOG_PAGE_OFFSET * PAGE_SIZE. For more information on + KVM_CAP_DIRTY_LOG_RING, see section 8.3. + + +4.7 KVM_CREATE_VCPU +------------------- + +:Capability: basic +:Architectures: all +:Type: vm ioctl +:Parameters: vcpu id (apic id on x86) +:Returns: vcpu fd on success, -1 on error + +This API adds a vcpu to a virtual machine. No more than max_vcpus may be added. +The vcpu id is an integer in the range [0, max_vcpu_id). + +The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of +the KVM_CHECK_EXTENSION ioctl() at run-time. +The maximum possible value for max_vcpus can be retrieved using the +KVM_CAP_MAX_VCPUS of the KVM_CHECK_EXTENSION ioctl() at run-time. + +If the KVM_CAP_NR_VCPUS does not exist, you should assume that max_vcpus is 4 +cpus max. +If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is +same as the value returned from KVM_CAP_NR_VCPUS. + +The maximum possible value for max_vcpu_id can be retrieved using the +KVM_CAP_MAX_VCPU_ID of the KVM_CHECK_EXTENSION ioctl() at run-time. + +If the KVM_CAP_MAX_VCPU_ID does not exist, you should assume that max_vcpu_id +is the same as the value returned from KVM_CAP_MAX_VCPUS. + +On powerpc using book3s_hv mode, the vcpus are mapped onto virtual +threads in one or more virtual CPU cores. (This is because the +hardware requires all the hardware threads in a CPU core to be in the +same partition.) The KVM_CAP_PPC_SMT capability indicates the number +of vcpus per virtual core (vcore). The vcore id is obtained by +dividing the vcpu id by the number of vcpus per vcore. The vcpus in a +given vcore will always be in the same physical core as each other +(though that might be a different physical core from time to time). +Userspace can control the threading (SMT) mode of the guest by its +allocation of vcpu ids. For example, if userspace wants +single-threaded guest vcpus, it should make all vcpu ids be a multiple +of the number of vcpus per vcore. + +For virtual cpus that have been created with S390 user controlled virtual +machines, the resulting vcpu fd can be memory mapped at page offset +KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual +cpu's hardware control block. + + +4.8 KVM_GET_DIRTY_LOG (vm ioctl) +-------------------------------- + +:Capability: basic +:Architectures: all +:Type: vm ioctl +:Parameters: struct kvm_dirty_log (in/out) +:Returns: 0 on success, -1 on error + +:: + + /* for KVM_GET_DIRTY_LOG */ + struct kvm_dirty_log { + __u32 slot; + __u32 padding; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; + }; + +Given a memory slot, return a bitmap containing any pages dirtied +since the last call to this ioctl. Bit 0 is the first page in the +memory slot. Ensure the entire structure is cleared to avoid padding +issues. + +If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of slot field specifies +the address space for which you want to return the dirty bitmap. See +KVM_SET_USER_MEMORY_REGION for details on the usage of slot field. + +The bits in the dirty bitmap are cleared before the ioctl returns, unless +KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is enabled. For more information, +see the description of the capability. + +Note that the Xen shared info page, if configured, shall always be assumed +to be dirty. KVM will not explicitly mark it such. + + +4.10 KVM_RUN +------------ + +:Capability: basic +:Architectures: all +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 on success, -1 on error + +Errors: + + ======= ============================================================== + EINTR an unmasked signal is pending + ENOEXEC the vcpu hasn't been initialized or the guest tried to execute + instructions from device memory (arm64) + ENOSYS data abort outside memslots with no syndrome info and + KVM_CAP_ARM_NISV_TO_USER not enabled (arm64) + EPERM SVE feature set but not finalized (arm64) + ======= ============================================================== + +This ioctl is used to run a guest virtual cpu. While there are no +explicit parameters, there is an implicit parameter block that can be +obtained by mmap()ing the vcpu fd at offset 0, with the size given by +KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct +kvm_run' (see below). + + +4.11 KVM_GET_REGS +----------------- + +:Capability: basic +:Architectures: all except arm64 +:Type: vcpu ioctl +:Parameters: struct kvm_regs (out) +:Returns: 0 on success, -1 on error + +Reads the general purpose registers from the vcpu. + +:: + + /* x86 */ + struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 rax, rbx, rcx, rdx; + __u64 rsi, rdi, rsp, rbp; + __u64 r8, r9, r10, r11; + __u64 r12, r13, r14, r15; + __u64 rip, rflags; + }; + + /* mips */ + struct kvm_regs { + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; + __u64 hi; + __u64 lo; + __u64 pc; + }; + + +4.12 KVM_SET_REGS +----------------- + +:Capability: basic +:Architectures: all except arm64 +:Type: vcpu ioctl +:Parameters: struct kvm_regs (in) +:Returns: 0 on success, -1 on error + +Writes the general purpose registers into the vcpu. + +See KVM_GET_REGS for the data structure. + + +4.13 KVM_GET_SREGS +------------------ + +:Capability: basic +:Architectures: x86, ppc +:Type: vcpu ioctl +:Parameters: struct kvm_sregs (out) +:Returns: 0 on success, -1 on error + +Reads special registers from the vcpu. + +:: + + /* x86 */ + struct kvm_sregs { + struct kvm_segment cs, ds, es, fs, gs, ss; + struct kvm_segment tr, ldt; + struct kvm_dtable gdt, idt; + __u64 cr0, cr2, cr3, cr4, cr8; + __u64 efer; + __u64 apic_base; + __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64]; + }; + + /* ppc -- see arch/powerpc/include/uapi/asm/kvm.h */ + +interrupt_bitmap is a bitmap of pending external interrupts. At most +one bit may be set. This interrupt has been acknowledged by the APIC +but not yet injected into the cpu core. + + +4.14 KVM_SET_SREGS +------------------ + +:Capability: basic +:Architectures: x86, ppc +:Type: vcpu ioctl +:Parameters: struct kvm_sregs (in) +:Returns: 0 on success, -1 on error + +Writes special registers into the vcpu. See KVM_GET_SREGS for the +data structures. + + +4.15 KVM_TRANSLATE +------------------ + +:Capability: basic +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_translation (in/out) +:Returns: 0 on success, -1 on error + +Translates a virtual address according to the vcpu's current address +translation mode. + +:: + + struct kvm_translation { + /* in */ + __u64 linear_address; + + /* out */ + __u64 physical_address; + __u8 valid; + __u8 writeable; + __u8 usermode; + __u8 pad[5]; + }; + + +4.16 KVM_INTERRUPT +------------------ + +:Capability: basic +:Architectures: x86, ppc, mips, riscv +:Type: vcpu ioctl +:Parameters: struct kvm_interrupt (in) +:Returns: 0 on success, negative on failure. + +Queues a hardware interrupt vector to be injected. + +:: + + /* for KVM_INTERRUPT */ + struct kvm_interrupt { + /* in */ + __u32 irq; + }; + +X86: +^^^^ + +:Returns: + + ========= =================================== + 0 on success, + -EEXIST if an interrupt is already enqueued + -EINVAL the irq number is invalid + -ENXIO if the PIC is in the kernel + -EFAULT if the pointer is invalid + ========= =================================== + +Note 'irq' is an interrupt vector, not an interrupt pin or line. This +ioctl is useful if the in-kernel PIC is not used. + +PPC: +^^^^ + +Queues an external interrupt to be injected. This ioctl is overleaded +with 3 different irq values: + +a) KVM_INTERRUPT_SET + + This injects an edge type external interrupt into the guest once it's ready + to receive interrupts. When injected, the interrupt is done. + +b) KVM_INTERRUPT_UNSET + + This unsets any pending interrupt. + + Only available with KVM_CAP_PPC_UNSET_IRQ. + +c) KVM_INTERRUPT_SET_LEVEL + + This injects a level type external interrupt into the guest context. The + interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET + is triggered. + + Only available with KVM_CAP_PPC_IRQ_LEVEL. + +Note that any value for 'irq' other than the ones stated above is invalid +and incurs unexpected behavior. + +This is an asynchronous vcpu ioctl and can be invoked from any thread. + +MIPS: +^^^^^ + +Queues an external interrupt to be injected into the virtual CPU. A negative +interrupt number dequeues the interrupt. + +This is an asynchronous vcpu ioctl and can be invoked from any thread. + +RISC-V: +^^^^^^^ + +Queues an external interrupt to be injected into the virtual CPU. This ioctl +is overloaded with 2 different irq values: + +a) KVM_INTERRUPT_SET + + This sets external interrupt for a virtual CPU and it will receive + once it is ready. + +b) KVM_INTERRUPT_UNSET + + This clears pending external interrupt for a virtual CPU. + +This is an asynchronous vcpu ioctl and can be invoked from any thread. + + +4.17 KVM_DEBUG_GUEST +-------------------- + +:Capability: basic +:Architectures: none +:Type: vcpu ioctl +:Parameters: none) +:Returns: -1 on error + +Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. + + +4.18 KVM_GET_MSRS +----------------- + +:Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system) +:Architectures: x86 +:Type: system ioctl, vcpu ioctl +:Parameters: struct kvm_msrs (in/out) +:Returns: number of msrs successfully returned; + -1 on error + +When used as a system ioctl: +Reads the values of MSR-based features that are available for the VM. This +is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values. +The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST +in a system ioctl. + +When used as a vcpu ioctl: +Reads model-specific registers from the vcpu. Supported msr indices can +be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl. + +:: + + struct kvm_msrs { + __u32 nmsrs; /* number of msrs in entries */ + __u32 pad; + + struct kvm_msr_entry entries[0]; + }; + + struct kvm_msr_entry { + __u32 index; + __u32 reserved; + __u64 data; + }; + +Application code should set the 'nmsrs' member (which indicates the +size of the entries array) and the 'index' member of each array entry. +kvm will fill in the 'data' member. + + +4.19 KVM_SET_MSRS +----------------- + +:Capability: basic +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_msrs (in) +:Returns: number of msrs successfully set (see below), -1 on error + +Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the +data structures. + +Application code should set the 'nmsrs' member (which indicates the +size of the entries array), and the 'index' and 'data' members of each +array entry. + +It tries to set the MSRs in array entries[] one by one. If setting an MSR +fails, e.g., due to setting reserved bits, the MSR isn't supported/emulated +by KVM, etc..., it stops processing the MSR list and returns the number of +MSRs that have been set successfully. + + +4.20 KVM_SET_CPUID +------------------ + +:Capability: basic +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_cpuid (in) +:Returns: 0 on success, -1 on error + +Defines the vcpu responses to the cpuid instruction. Applications +should use the KVM_SET_CPUID2 ioctl if available. + +Caveat emptor: + - If this IOCTL fails, KVM gives no guarantees that previous valid CPUID + configuration (if there is) is not corrupted. Userspace can get a copy + of the resulting CPUID configuration through KVM_GET_CPUID2 in case. + - Using KVM_SET_CPUID{,2} after KVM_RUN, i.e. changing the guest vCPU model + after running the guest, may cause guest instability. + - Using heterogeneous CPUID configurations, modulo APIC IDs, topology, etc... + may cause guest instability. + +:: + + struct kvm_cpuid_entry { + __u32 function; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding; + }; + + /* for KVM_SET_CPUID */ + struct kvm_cpuid { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry entries[0]; + }; + + +4.21 KVM_SET_SIGNAL_MASK +------------------------ + +:Capability: basic +:Architectures: all +:Type: vcpu ioctl +:Parameters: struct kvm_signal_mask (in) +:Returns: 0 on success, -1 on error + +Defines which signals are blocked during execution of KVM_RUN. This +signal mask temporarily overrides the threads signal mask. Any +unblocked signal received (except SIGKILL and SIGSTOP, which retain +their traditional behaviour) will cause KVM_RUN to return with -EINTR. + +Note the signal will only be delivered if not blocked by the original +signal mask. + +:: + + /* for KVM_SET_SIGNAL_MASK */ + struct kvm_signal_mask { + __u32 len; + __u8 sigset[0]; + }; + + +4.22 KVM_GET_FPU +---------------- + +:Capability: basic +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_fpu (out) +:Returns: 0 on success, -1 on error + +Reads the floating point state from the vcpu. + +:: + + /* for KVM_GET_FPU and KVM_SET_FPU */ + struct kvm_fpu { + __u8 fpr[8][16]; + __u16 fcw; + __u16 fsw; + __u8 ftwx; /* in fxsave format */ + __u8 pad1; + __u16 last_opcode; + __u64 last_ip; + __u64 last_dp; + __u8 xmm[16][16]; + __u32 mxcsr; + __u32 pad2; + }; + + +4.23 KVM_SET_FPU +---------------- + +:Capability: basic +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_fpu (in) +:Returns: 0 on success, -1 on error + +Writes the floating point state to the vcpu. + +:: + + /* for KVM_GET_FPU and KVM_SET_FPU */ + struct kvm_fpu { + __u8 fpr[8][16]; + __u16 fcw; + __u16 fsw; + __u8 ftwx; /* in fxsave format */ + __u8 pad1; + __u16 last_opcode; + __u64 last_ip; + __u64 last_dp; + __u8 xmm[16][16]; + __u32 mxcsr; + __u32 pad2; + }; + + +4.24 KVM_CREATE_IRQCHIP +----------------------- + +:Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390) +:Architectures: x86, arm64, s390 +:Type: vm ioctl +:Parameters: none +:Returns: 0 on success, -1 on error + +Creates an interrupt controller model in the kernel. +On x86, creates a virtual ioapic, a virtual PIC (two PICs, nested), and sets up +future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both +PIC and IOAPIC; GSI 16-23 only go to the IOAPIC. +On arm64, a GICv2 is created. Any other GIC versions require the usage of +KVM_CREATE_DEVICE, which also supports creating a GICv2. Using +KVM_CREATE_DEVICE is preferred over KVM_CREATE_IRQCHIP for GICv2. +On s390, a dummy irq routing table is created. + +Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled +before KVM_CREATE_IRQCHIP can be used. + + +4.25 KVM_IRQ_LINE +----------------- + +:Capability: KVM_CAP_IRQCHIP +:Architectures: x86, arm64 +:Type: vm ioctl +:Parameters: struct kvm_irq_level +:Returns: 0 on success, -1 on error + +Sets the level of a GSI input to the interrupt controller model in the kernel. +On some architectures it is required that an interrupt controller model has +been previously created with KVM_CREATE_IRQCHIP. Note that edge-triggered +interrupts require the level to be set to 1 and then back to 0. + +On real hardware, interrupt pins can be active-low or active-high. This +does not matter for the level field of struct kvm_irq_level: 1 always +means active (asserted), 0 means inactive (deasserted). + +x86 allows the operating system to program the interrupt polarity +(active-low/active-high) for level-triggered interrupts, and KVM used +to consider the polarity. However, due to bitrot in the handling of +active-low interrupts, the above convention is now valid on x86 too. +This is signaled by KVM_CAP_X86_IOAPIC_POLARITY_IGNORED. Userspace +should not present interrupts to the guest as active-low unless this +capability is present (or unless it is not using the in-kernel irqchip, +of course). + + +arm64 can signal an interrupt either at the CPU level, or at the +in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to +use PPIs designated for specific cpus. The irq field is interpreted +like this:: + + bits: | 31 ... 28 | 27 ... 24 | 23 ... 16 | 15 ... 0 | + field: | vcpu2_index | irq_type | vcpu_index | irq_id | + +The irq_type field has the following values: + +- irq_type[0]: + out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ +- irq_type[1]: + in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.) + (the vcpu_index field is ignored) +- irq_type[2]: + in-kernel GIC: PPI, irq_id between 16 and 31 (incl.) + +(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs) + +In both cases, level is used to assert/deassert the line. + +When KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 is supported, the target vcpu is +identified as (256 * vcpu2_index + vcpu_index). Otherwise, vcpu2_index +must be zero. + +Note that on arm64, the KVM_CAP_IRQCHIP capability only conditions +injection of interrupts for the in-kernel irqchip. KVM_IRQ_LINE can always +be used for a userspace interrupt controller. + +:: + + struct kvm_irq_level { + union { + __u32 irq; /* GSI */ + __s32 status; /* not used for KVM_IRQ_LEVEL */ + }; + __u32 level; /* 0 or 1 */ + }; + + +4.26 KVM_GET_IRQCHIP +-------------------- + +:Capability: KVM_CAP_IRQCHIP +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_irqchip (in/out) +:Returns: 0 on success, -1 on error + +Reads the state of a kernel interrupt controller created with +KVM_CREATE_IRQCHIP into a buffer provided by the caller. + +:: + + struct kvm_irqchip { + __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ + __u32 pad; + union { + char dummy[512]; /* reserving space */ + struct kvm_pic_state pic; + struct kvm_ioapic_state ioapic; + } chip; + }; + + +4.27 KVM_SET_IRQCHIP +-------------------- + +:Capability: KVM_CAP_IRQCHIP +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_irqchip (in) +:Returns: 0 on success, -1 on error + +Sets the state of a kernel interrupt controller created with +KVM_CREATE_IRQCHIP from a buffer provided by the caller. + +:: + + struct kvm_irqchip { + __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ + __u32 pad; + union { + char dummy[512]; /* reserving space */ + struct kvm_pic_state pic; + struct kvm_ioapic_state ioapic; + } chip; + }; + + +4.28 KVM_XEN_HVM_CONFIG +----------------------- + +:Capability: KVM_CAP_XEN_HVM +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_xen_hvm_config (in) +:Returns: 0 on success, -1 on error + +Sets the MSR that the Xen HVM guest uses to initialize its hypercall +page, and provides the starting address and size of the hypercall +blobs in userspace. When the guest writes the MSR, kvm copies one +page of a blob (32- or 64-bit, depending on the vcpu mode) to guest +memory. + +:: + + struct kvm_xen_hvm_config { + __u32 flags; + __u32 msr; + __u64 blob_addr_32; + __u64 blob_addr_64; + __u8 blob_size_32; + __u8 blob_size_64; + __u8 pad2[30]; + }; + +If certain flags are returned from the KVM_CAP_XEN_HVM check, they may +be set in the flags field of this ioctl: + +The KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag requests KVM to generate +the contents of the hypercall page automatically; hypercalls will be +intercepted and passed to userspace through KVM_EXIT_XEN. In this +ase, all of the blob size and address fields must be zero. + +The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates to KVM that userspace +will always use the KVM_XEN_HVM_EVTCHN_SEND ioctl to deliver event +channel interrupts rather than manipulating the guest's shared_info +structures directly. This, in turn, may allow KVM to enable features +such as intercepting the SCHEDOP_poll hypercall to accelerate PV +spinlock operation for the guest. Userspace may still use the ioctl +to deliver events if it was advertised, even if userspace does not +send this indication that it will always do so + +No other flags are currently valid in the struct kvm_xen_hvm_config. + +4.29 KVM_GET_CLOCK +------------------ + +:Capability: KVM_CAP_ADJUST_CLOCK +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_clock_data (out) +:Returns: 0 on success, -1 on error + +Gets the current timestamp of kvmclock as seen by the current guest. In +conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios +such as migration. + +When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the +set of bits that KVM can return in struct kvm_clock_data's flag member. + +The following flags are defined: + +KVM_CLOCK_TSC_STABLE + If set, the returned value is the exact kvmclock + value seen by all VCPUs at the instant when KVM_GET_CLOCK was called. + If clear, the returned value is simply CLOCK_MONOTONIC plus a constant + offset; the offset can be modified with KVM_SET_CLOCK. KVM will try + to make all VCPUs follow this clock, but the exact value read by each + VCPU could differ, because the host TSC is not stable. + +KVM_CLOCK_REALTIME + If set, the `realtime` field in the kvm_clock_data + structure is populated with the value of the host's real time + clocksource at the instant when KVM_GET_CLOCK was called. If clear, + the `realtime` field does not contain a value. + +KVM_CLOCK_HOST_TSC + If set, the `host_tsc` field in the kvm_clock_data + structure is populated with the value of the host's timestamp counter (TSC) + at the instant when KVM_GET_CLOCK was called. If clear, the `host_tsc` field + does not contain a value. + +:: + + struct kvm_clock_data { + __u64 clock; /* kvmclock current value */ + __u32 flags; + __u32 pad0; + __u64 realtime; + __u64 host_tsc; + __u32 pad[4]; + }; + + +4.30 KVM_SET_CLOCK +------------------ + +:Capability: KVM_CAP_ADJUST_CLOCK +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_clock_data (in) +:Returns: 0 on success, -1 on error + +Sets the current timestamp of kvmclock to the value specified in its parameter. +In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios +such as migration. + +The following flags can be passed: + +KVM_CLOCK_REALTIME + If set, KVM will compare the value of the `realtime` field + with the value of the host's real time clocksource at the instant when + KVM_SET_CLOCK was called. The difference in elapsed time is added to the final + kvmclock value that will be provided to guests. + +Other flags returned by ``KVM_GET_CLOCK`` are accepted but ignored. + +:: + + struct kvm_clock_data { + __u64 clock; /* kvmclock current value */ + __u32 flags; + __u32 pad0; + __u64 realtime; + __u64 host_tsc; + __u32 pad[4]; + }; + + +4.31 KVM_GET_VCPU_EVENTS +------------------------ + +:Capability: KVM_CAP_VCPU_EVENTS +:Extended by: KVM_CAP_INTR_SHADOW +:Architectures: x86, arm64 +:Type: vcpu ioctl +:Parameters: struct kvm_vcpu_event (out) +:Returns: 0 on success, -1 on error + +X86: +^^^^ + +Gets currently pending exceptions, interrupts, and NMIs as well as related +states of the vcpu. + +:: + + struct kvm_vcpu_events { + struct { + __u8 injected; + __u8 nr; + __u8 has_error_code; + __u8 pending; + __u32 error_code; + } exception; + struct { + __u8 injected; + __u8 nr; + __u8 soft; + __u8 shadow; + } interrupt; + struct { + __u8 injected; + __u8 pending; + __u8 masked; + __u8 pad; + } nmi; + __u32 sipi_vector; + __u32 flags; + struct { + __u8 smm; + __u8 pending; + __u8 smm_inside_nmi; + __u8 latched_init; + } smi; + __u8 reserved[27]; + __u8 exception_has_payload; + __u64 exception_payload; + }; + +The following bits are defined in the flags field: + +- KVM_VCPUEVENT_VALID_SHADOW may be set to signal that + interrupt.shadow contains a valid state. + +- KVM_VCPUEVENT_VALID_SMM may be set to signal that smi contains a + valid state. + +- KVM_VCPUEVENT_VALID_PAYLOAD may be set to signal that the + exception_has_payload, exception_payload, and exception.pending + fields contain a valid state. This bit will be set whenever + KVM_CAP_EXCEPTION_PAYLOAD is enabled. + +- KVM_VCPUEVENT_VALID_TRIPLE_FAULT may be set to signal that the + triple_fault_pending field contains a valid state. This bit will + be set whenever KVM_CAP_X86_TRIPLE_FAULT_EVENT is enabled. + +ARM64: +^^^^^^ + +If the guest accesses a device that is being emulated by the host kernel in +such a way that a real device would generate a physical SError, KVM may make +a virtual SError pending for that VCPU. This system error interrupt remains +pending until the guest takes the exception by unmasking PSTATE.A. + +Running the VCPU may cause it to take a pending SError, or make an access that +causes an SError to become pending. The event's description is only valid while +the VPCU is not running. + +This API provides a way to read and write the pending 'event' state that is not +visible to the guest. To save, restore or migrate a VCPU the struct representing +the state can be read then written using this GET/SET API, along with the other +guest-visible registers. It is not possible to 'cancel' an SError that has been +made pending. + +A device being emulated in user-space may also wish to generate an SError. To do +this the events structure can be populated by user-space. The current state +should be read first, to ensure no existing SError is pending. If an existing +SError is pending, the architecture's 'Multiple SError interrupts' rules should +be followed. (2.5.3 of DDI0587.a "ARM Reliability, Availability, and +Serviceability (RAS) Specification"). + +SError exceptions always have an ESR value. Some CPUs have the ability to +specify what the virtual SError's ESR value should be. These systems will +advertise KVM_CAP_ARM_INJECT_SERROR_ESR. In this case exception.has_esr will +always have a non-zero value when read, and the agent making an SError pending +should specify the ISS field in the lower 24 bits of exception.serror_esr. If +the system supports KVM_CAP_ARM_INJECT_SERROR_ESR, but user-space sets the events +with exception.has_esr as zero, KVM will choose an ESR. + +Specifying exception.has_esr on a system that does not support it will return +-EINVAL. Setting anything other than the lower 24bits of exception.serror_esr +will return -EINVAL. + +It is not possible to read back a pending external abort (injected via +KVM_SET_VCPU_EVENTS or otherwise) because such an exception is always delivered +directly to the virtual CPU). + +:: + + struct kvm_vcpu_events { + struct { + __u8 serror_pending; + __u8 serror_has_esr; + __u8 ext_dabt_pending; + /* Align it to 8 bytes */ + __u8 pad[5]; + __u64 serror_esr; + } exception; + __u32 reserved[12]; + }; + +4.32 KVM_SET_VCPU_EVENTS +------------------------ + +:Capability: KVM_CAP_VCPU_EVENTS +:Extended by: KVM_CAP_INTR_SHADOW +:Architectures: x86, arm64 +:Type: vcpu ioctl +:Parameters: struct kvm_vcpu_event (in) +:Returns: 0 on success, -1 on error + +X86: +^^^^ + +Set pending exceptions, interrupts, and NMIs as well as related states of the +vcpu. + +See KVM_GET_VCPU_EVENTS for the data structure. + +Fields that may be modified asynchronously by running VCPUs can be excluded +from the update. These fields are nmi.pending, sipi_vector, smi.smm, +smi.pending. Keep the corresponding bits in the flags field cleared to +suppress overwriting the current in-kernel state. The bits are: + +=============================== ================================== +KVM_VCPUEVENT_VALID_NMI_PENDING transfer nmi.pending to the kernel +KVM_VCPUEVENT_VALID_SIPI_VECTOR transfer sipi_vector +KVM_VCPUEVENT_VALID_SMM transfer the smi sub-struct. +=============================== ================================== + +If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in +the flags field to signal that interrupt.shadow contains a valid state and +shall be written into the VCPU. + +KVM_VCPUEVENT_VALID_SMM can only be set if KVM_CAP_X86_SMM is available. + +If KVM_CAP_EXCEPTION_PAYLOAD is enabled, KVM_VCPUEVENT_VALID_PAYLOAD +can be set in the flags field to signal that the +exception_has_payload, exception_payload, and exception.pending fields +contain a valid state and shall be written into the VCPU. + +If KVM_CAP_X86_TRIPLE_FAULT_EVENT is enabled, KVM_VCPUEVENT_VALID_TRIPLE_FAULT +can be set in flags field to signal that the triple_fault field contains +a valid state and shall be written into the VCPU. + +ARM64: +^^^^^^ + +User space may need to inject several types of events to the guest. + +Set the pending SError exception state for this VCPU. It is not possible to +'cancel' an Serror that has been made pending. + +If the guest performed an access to I/O memory which could not be handled by +userspace, for example because of missing instruction syndrome decode +information or because there is no device mapped at the accessed IPA, then +userspace can ask the kernel to inject an external abort using the address +from the exiting fault on the VCPU. It is a programming error to set +ext_dabt_pending after an exit which was not either KVM_EXIT_MMIO or +KVM_EXIT_ARM_NISV. This feature is only available if the system supports +KVM_CAP_ARM_INJECT_EXT_DABT. This is a helper which provides commonality in +how userspace reports accesses for the above cases to guests, across different +userspace implementations. Nevertheless, userspace can still emulate all Arm +exceptions by manipulating individual registers using the KVM_SET_ONE_REG API. + +See KVM_GET_VCPU_EVENTS for the data structure. + + +4.33 KVM_GET_DEBUGREGS +---------------------- + +:Capability: KVM_CAP_DEBUGREGS +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_debugregs (out) +:Returns: 0 on success, -1 on error + +Reads debug registers from the vcpu. + +:: + + struct kvm_debugregs { + __u64 db[4]; + __u64 dr6; + __u64 dr7; + __u64 flags; + __u64 reserved[9]; + }; + + +4.34 KVM_SET_DEBUGREGS +---------------------- + +:Capability: KVM_CAP_DEBUGREGS +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_debugregs (in) +:Returns: 0 on success, -1 on error + +Writes debug registers into the vcpu. + +See KVM_GET_DEBUGREGS for the data structure. The flags field is unused +yet and must be cleared on entry. + + +4.35 KVM_SET_USER_MEMORY_REGION +------------------------------- + +:Capability: KVM_CAP_USER_MEMORY +:Architectures: all +:Type: vm ioctl +:Parameters: struct kvm_userspace_memory_region (in) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_userspace_memory_region { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; /* bytes */ + __u64 userspace_addr; /* start of the userspace allocated memory */ + }; + + /* for kvm_userspace_memory_region::flags */ + #define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) + #define KVM_MEM_READONLY (1UL << 1) + +This ioctl allows the user to create, modify or delete a guest physical +memory slot. Bits 0-15 of "slot" specify the slot id and this value +should be less than the maximum number of user memory slots supported per +VM. The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS. +Slots may not overlap in guest physical address space. + +If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot" +specifies the address space which is being modified. They must be +less than the value that KVM_CHECK_EXTENSION returns for the +KVM_CAP_MULTI_ADDRESS_SPACE capability. Slots in separate address spaces +are unrelated; the restriction on overlapping slots only applies within +each address space. + +Deleting a slot is done by passing zero for memory_size. When changing +an existing slot, it may be moved in the guest physical memory space, +or its flags may be modified, but it may not be resized. + +Memory for the region is taken starting at the address denoted by the +field userspace_addr, which must point at user addressable memory for +the entire memory slot size. Any object may back this memory, including +anonymous memory, ordinary files, and hugetlbfs. + +On architectures that support a form of address tagging, userspace_addr must +be an untagged address. + +It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr +be identical. This allows large pages in the guest to be backed by large +pages in the host. + +The flags field supports two flags: KVM_MEM_LOG_DIRTY_PAGES and +KVM_MEM_READONLY. The former can be set to instruct KVM to keep track of +writes to memory within the slot. See KVM_GET_DIRTY_LOG ioctl to know how to +use it. The latter can be set, if KVM_CAP_READONLY_MEM capability allows it, +to make a new slot read-only. In this case, writes to this memory will be +posted to userspace as KVM_EXIT_MMIO exits. + +When the KVM_CAP_SYNC_MMU capability is available, changes in the backing of +the memory region are automatically reflected into the guest. For example, an +mmap() that affects the region will be made visible immediately. Another +example is madvise(MADV_DROP). + +Note: On arm64, a write generated by the page-table walker (to update +the Access and Dirty flags, for example) never results in a +KVM_EXIT_MMIO exit when the slot has the KVM_MEM_READONLY flag. This +is because KVM cannot provide the data that would be written by the +page-table walker, making it impossible to emulate the access. +Instead, an abort (data abort if the cause of the page-table update +was a load or a store, instruction abort if it was an instruction +fetch) is injected in the guest. + +4.36 KVM_SET_TSS_ADDR +--------------------- + +:Capability: KVM_CAP_SET_TSS_ADDR +:Architectures: x86 +:Type: vm ioctl +:Parameters: unsigned long tss_address (in) +:Returns: 0 on success, -1 on error + +This ioctl defines the physical address of a three-page region in the guest +physical address space. The region must be within the first 4GB of the +guest physical address space and must not conflict with any memory slot +or any mmio address. The guest may malfunction if it accesses this memory +region. + +This ioctl is required on Intel-based hosts. This is needed on Intel hardware +because of a quirk in the virtualization implementation (see the internals +documentation when it pops into existence). + + +4.37 KVM_ENABLE_CAP +------------------- + +:Capability: KVM_CAP_ENABLE_CAP +:Architectures: mips, ppc, s390, x86 +:Type: vcpu ioctl +:Parameters: struct kvm_enable_cap (in) +:Returns: 0 on success; -1 on error + +:Capability: KVM_CAP_ENABLE_CAP_VM +:Architectures: all +:Type: vm ioctl +:Parameters: struct kvm_enable_cap (in) +:Returns: 0 on success; -1 on error + +.. note:: + + Not all extensions are enabled by default. Using this ioctl the application + can enable an extension, making it available to the guest. + +On systems that do not support this ioctl, it always fails. On systems that +do support it, it only works for extensions that are supported for enablement. + +To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should +be used. + +:: + + struct kvm_enable_cap { + /* in */ + __u32 cap; + +The capability that is supposed to get enabled. + +:: + + __u32 flags; + +A bitfield indicating future enhancements. Has to be 0 for now. + +:: + + __u64 args[4]; + +Arguments for enabling a feature. If a feature needs initial values to +function properly, this is the place to put them. + +:: + + __u8 pad[64]; + }; + +The vcpu ioctl should be used for vcpu-specific capabilities, the vm ioctl +for vm-wide capabilities. + +4.38 KVM_GET_MP_STATE +--------------------- + +:Capability: KVM_CAP_MP_STATE +:Architectures: x86, s390, arm64, riscv +:Type: vcpu ioctl +:Parameters: struct kvm_mp_state (out) +:Returns: 0 on success; -1 on error + +:: + + struct kvm_mp_state { + __u32 mp_state; + }; + +Returns the vcpu's current "multiprocessing state" (though also valid on +uniprocessor guests). + +Possible values are: + + ========================== =============================================== + KVM_MP_STATE_RUNNABLE the vcpu is currently running + [x86,arm64,riscv] + KVM_MP_STATE_UNINITIALIZED the vcpu is an application processor (AP) + which has not yet received an INIT signal [x86] + KVM_MP_STATE_INIT_RECEIVED the vcpu has received an INIT signal, and is + now ready for a SIPI [x86] + KVM_MP_STATE_HALTED the vcpu has executed a HLT instruction and + is waiting for an interrupt [x86] + KVM_MP_STATE_SIPI_RECEIVED the vcpu has just received a SIPI (vector + accessible via KVM_GET_VCPU_EVENTS) [x86] + KVM_MP_STATE_STOPPED the vcpu is stopped [s390,arm64,riscv] + KVM_MP_STATE_CHECK_STOP the vcpu is in a special error state [s390] + KVM_MP_STATE_OPERATING the vcpu is operating (running or halted) + [s390] + KVM_MP_STATE_LOAD the vcpu is in a special load/startup state + [s390] + KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting + for a wakeup event [arm64] + ========================== =============================================== + +On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an +in-kernel irqchip, the multiprocessing state must be maintained by userspace on +these architectures. + +For arm64: +^^^^^^^^^^ + +If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will emulate the +architectural execution of a WFI instruction. + +If a wakeup event is recognized, KVM will exit to userspace with a +KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If +userspace wants to honor the wakeup, it must set the vCPU's MP state to +KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup +event in subsequent calls to KVM_RUN. + +.. warning:: + + If userspace intends to keep the vCPU in a SUSPENDED state, it is + strongly recommended that userspace take action to suppress the + wakeup event (such as masking an interrupt). Otherwise, subsequent + calls to KVM_RUN will immediately exit with a KVM_SYSTEM_EVENT_WAKEUP + event and inadvertently waste CPU cycles. + + Additionally, if userspace takes action to suppress a wakeup event, + it is strongly recommended that it also restores the vCPU to its + original state when the vCPU is made RUNNABLE again. For example, + if userspace masked a pending interrupt to suppress the wakeup, + the interrupt should be unmasked before returning control to the + guest. + +For riscv: +^^^^^^^^^^ + +The only states that are valid are KVM_MP_STATE_STOPPED and +KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not. + +4.39 KVM_SET_MP_STATE +--------------------- + +:Capability: KVM_CAP_MP_STATE +:Architectures: x86, s390, arm64, riscv +:Type: vcpu ioctl +:Parameters: struct kvm_mp_state (in) +:Returns: 0 on success; -1 on error + +Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for +arguments. + +On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an +in-kernel irqchip, the multiprocessing state must be maintained by userspace on +these architectures. + +For arm64/riscv: +^^^^^^^^^^^^^^^^ + +The only states that are valid are KVM_MP_STATE_STOPPED and +KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not. + +4.40 KVM_SET_IDENTITY_MAP_ADDR +------------------------------ + +:Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR +:Architectures: x86 +:Type: vm ioctl +:Parameters: unsigned long identity (in) +:Returns: 0 on success, -1 on error + +This ioctl defines the physical address of a one-page region in the guest +physical address space. The region must be within the first 4GB of the +guest physical address space and must not conflict with any memory slot +or any mmio address. The guest may malfunction if it accesses this memory +region. + +Setting the address to 0 will result in resetting the address to its default +(0xfffbc000). + +This ioctl is required on Intel-based hosts. This is needed on Intel hardware +because of a quirk in the virtualization implementation (see the internals +documentation when it pops into existence). + +Fails if any VCPU has already been created. + +4.41 KVM_SET_BOOT_CPU_ID +------------------------ + +:Capability: KVM_CAP_SET_BOOT_CPU_ID +:Architectures: x86 +:Type: vm ioctl +:Parameters: unsigned long vcpu_id +:Returns: 0 on success, -1 on error + +Define which vcpu is the Bootstrap Processor (BSP). Values are the same +as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default +is vcpu 0. This ioctl has to be called before vcpu creation, +otherwise it will return EBUSY error. + + +4.42 KVM_GET_XSAVE +------------------ + +:Capability: KVM_CAP_XSAVE +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xsave (out) +:Returns: 0 on success, -1 on error + + +:: + + struct kvm_xsave { + __u32 region[1024]; + __u32 extra[0]; + }; + +This ioctl would copy current vcpu's xsave struct to the userspace. + + +4.43 KVM_SET_XSAVE +------------------ + +:Capability: KVM_CAP_XSAVE and KVM_CAP_XSAVE2 +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xsave (in) +:Returns: 0 on success, -1 on error + +:: + + + struct kvm_xsave { + __u32 region[1024]; + __u32 extra[0]; + }; + +This ioctl would copy userspace's xsave struct to the kernel. It copies +as many bytes as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2), +when invoked on the vm file descriptor. The size value returned by +KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) will always be at least 4096. +Currently, it is only greater than 4096 if a dynamic feature has been +enabled with ``arch_prctl()``, but this may change in the future. + +The offsets of the state save areas in struct kvm_xsave follow the +contents of CPUID leaf 0xD on the host. + + +4.44 KVM_GET_XCRS +----------------- + +:Capability: KVM_CAP_XCRS +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xcrs (out) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_xcr { + __u32 xcr; + __u32 reserved; + __u64 value; + }; + + struct kvm_xcrs { + __u32 nr_xcrs; + __u32 flags; + struct kvm_xcr xcrs[KVM_MAX_XCRS]; + __u64 padding[16]; + }; + +This ioctl would copy current vcpu's xcrs to the userspace. + + +4.45 KVM_SET_XCRS +----------------- + +:Capability: KVM_CAP_XCRS +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xcrs (in) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_xcr { + __u32 xcr; + __u32 reserved; + __u64 value; + }; + + struct kvm_xcrs { + __u32 nr_xcrs; + __u32 flags; + struct kvm_xcr xcrs[KVM_MAX_XCRS]; + __u64 padding[16]; + }; + +This ioctl would set vcpu's xcr to the value userspace specified. + + +4.46 KVM_GET_SUPPORTED_CPUID +---------------------------- + +:Capability: KVM_CAP_EXT_CPUID +:Architectures: x86 +:Type: system ioctl +:Parameters: struct kvm_cpuid2 (in/out) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_cpuid2 { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry2 entries[0]; + }; + + #define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0) + #define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1) /* deprecated */ + #define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2) /* deprecated */ + + struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; + }; + +This ioctl returns x86 cpuid features which are supported by both the +hardware and kvm in its default configuration. Userspace can use the +information returned by this ioctl to construct cpuid information (for +KVM_SET_CPUID2) that is consistent with hardware, kernel, and +userspace capabilities, and with user requirements (for example, the +user may wish to constrain cpuid to emulate older hardware, or for +feature consistency across a cluster). + +Dynamically-enabled feature bits need to be requested with +``arch_prctl()`` before calling this ioctl. Feature bits that have not +been requested are excluded from the result. + +Note that certain capabilities, such as KVM_CAP_X86_DISABLE_EXITS, may +expose cpuid features (e.g. MONITOR) which are not supported by kvm in +its default configuration. If userspace enables such capabilities, it +is responsible for modifying the results of this ioctl appropriately. + +Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure +with the 'nent' field indicating the number of entries in the variable-size +array 'entries'. If the number of entries is too low to describe the cpu +capabilities, an error (E2BIG) is returned. If the number is too high, +the 'nent' field is adjusted and an error (ENOMEM) is returned. If the +number is just right, the 'nent' field is adjusted to the number of valid +entries in the 'entries' array, which is then filled. + +The entries returned are the host cpuid as returned by the cpuid instruction, +with unknown or unsupported features masked out. Some features (for example, +x2apic), may not be present in the host cpu, but are exposed by kvm if it can +emulate them efficiently. The fields in each entry are defined as follows: + + function: + the eax value used to obtain the entry + + index: + the ecx value used to obtain the entry (for entries that are + affected by ecx) + + flags: + an OR of zero or more of the following: + + KVM_CPUID_FLAG_SIGNIFCANT_INDEX: + if the index field is valid + + eax, ebx, ecx, edx: + the values returned by the cpuid instruction for + this function/index combination + +The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned +as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC +support. Instead it is reported via:: + + ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER) + +if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the +feature in userspace, then you can enable the feature for KVM_SET_CPUID2. + + +4.47 KVM_PPC_GET_PVINFO +----------------------- + +:Capability: KVM_CAP_PPC_GET_PVINFO +:Architectures: ppc +:Type: vm ioctl +:Parameters: struct kvm_ppc_pvinfo (out) +:Returns: 0 on success, !0 on error + +:: + + struct kvm_ppc_pvinfo { + __u32 flags; + __u32 hcall[4]; + __u8 pad[108]; + }; + +This ioctl fetches PV specific information that need to be passed to the guest +using the device tree or other means from vm context. + +The hcall array defines 4 instructions that make up a hypercall. + +If any additional field gets added to this structure later on, a bit for that +additional piece of information will be set in the flags bitmap. + +The flags bitmap is defined as:: + + /* the host supports the ePAPR idle hcall + #define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + +4.52 KVM_SET_GSI_ROUTING +------------------------ + +:Capability: KVM_CAP_IRQ_ROUTING +:Architectures: x86 s390 arm64 +:Type: vm ioctl +:Parameters: struct kvm_irq_routing (in) +:Returns: 0 on success, -1 on error + +Sets the GSI routing table entries, overwriting any previously set entries. + +On arm64, GSI routing has the following limitation: + +- GSI routing does not apply to KVM_IRQ_LINE but only to KVM_IRQFD. + +:: + + struct kvm_irq_routing { + __u32 nr; + __u32 flags; + struct kvm_irq_routing_entry entries[0]; + }; + +No flags are specified so far, the corresponding field must be set to zero. + +:: + + struct kvm_irq_routing_entry { + __u32 gsi; + __u32 type; + __u32 flags; + __u32 pad; + union { + struct kvm_irq_routing_irqchip irqchip; + struct kvm_irq_routing_msi msi; + struct kvm_irq_routing_s390_adapter adapter; + struct kvm_irq_routing_hv_sint hv_sint; + struct kvm_irq_routing_xen_evtchn xen_evtchn; + __u32 pad[8]; + } u; + }; + + /* gsi routing entry types */ + #define KVM_IRQ_ROUTING_IRQCHIP 1 + #define KVM_IRQ_ROUTING_MSI 2 + #define KVM_IRQ_ROUTING_S390_ADAPTER 3 + #define KVM_IRQ_ROUTING_HV_SINT 4 + #define KVM_IRQ_ROUTING_XEN_EVTCHN 5 + +flags: + +- KVM_MSI_VALID_DEVID: used along with KVM_IRQ_ROUTING_MSI routing entry + type, specifies that the devid field contains a valid value. The per-VM + KVM_CAP_MSI_DEVID capability advertises the requirement to provide + the device ID. If this capability is not available, userspace should + never set the KVM_MSI_VALID_DEVID flag as the ioctl might fail. +- zero otherwise + +:: + + struct kvm_irq_routing_irqchip { + __u32 irqchip; + __u32 pin; + }; + + struct kvm_irq_routing_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + union { + __u32 pad; + __u32 devid; + }; + }; + +If KVM_MSI_VALID_DEVID is set, devid contains a unique device identifier +for the device that wrote the MSI message. For PCI, this is usually a +BFD identifier in the lower 16 bits. + +On x86, address_hi is ignored unless the KVM_X2APIC_API_USE_32BIT_IDS +feature of KVM_CAP_X2APIC_API capability is enabled. If it is enabled, +address_hi bits 31-8 provide bits 31-8 of the destination id. Bits 7-0 of +address_hi must be zero. + +:: + + struct kvm_irq_routing_s390_adapter { + __u64 ind_addr; + __u64 summary_addr; + __u64 ind_offset; + __u32 summary_offset; + __u32 adapter_id; + }; + + struct kvm_irq_routing_hv_sint { + __u32 vcpu; + __u32 sint; + }; + + struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; + }; + + +When KVM_CAP_XEN_HVM includes the KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL bit +in its indication of supported features, routing to Xen event channels +is supported. Although the priority field is present, only the value +KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL is supported, which means delivery by +2 level event channels. FIFO event channel support may be added in +the future. + + +4.55 KVM_SET_TSC_KHZ +-------------------- + +:Capability: KVM_CAP_TSC_CONTROL / KVM_CAP_VM_TSC_CONTROL +:Architectures: x86 +:Type: vcpu ioctl / vm ioctl +:Parameters: virtual tsc_khz +:Returns: 0 on success, -1 on error + +Specifies the tsc frequency for the virtual machine. The unit of the +frequency is KHz. + +If the KVM_CAP_VM_TSC_CONTROL capability is advertised, this can also +be used as a vm ioctl to set the initial tsc frequency of subsequently +created vCPUs. + +4.56 KVM_GET_TSC_KHZ +-------------------- + +:Capability: KVM_CAP_GET_TSC_KHZ / KVM_CAP_VM_TSC_CONTROL +:Architectures: x86 +:Type: vcpu ioctl / vm ioctl +:Parameters: none +:Returns: virtual tsc-khz on success, negative value on error + +Returns the tsc frequency of the guest. The unit of the return value is +KHz. If the host has unstable tsc this ioctl returns -EIO instead as an +error. + + +4.57 KVM_GET_LAPIC +------------------ + +:Capability: KVM_CAP_IRQCHIP +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_lapic_state (out) +:Returns: 0 on success, -1 on error + +:: + + #define KVM_APIC_REG_SIZE 0x400 + struct kvm_lapic_state { + char regs[KVM_APIC_REG_SIZE]; + }; + +Reads the Local APIC registers and copies them into the input argument. The +data format and layout are the same as documented in the architecture manual. + +If KVM_X2APIC_API_USE_32BIT_IDS feature of KVM_CAP_X2APIC_API is +enabled, then the format of APIC_ID register depends on the APIC mode +(reported by MSR_IA32_APICBASE) of its VCPU. x2APIC stores APIC ID in +the APIC_ID register (bytes 32-35). xAPIC only allows an 8-bit APIC ID +which is stored in bits 31-24 of the APIC register, or equivalently in +byte 35 of struct kvm_lapic_state's regs field. KVM_GET_LAPIC must then +be called after MSR_IA32_APICBASE has been set with KVM_SET_MSR. + +If KVM_X2APIC_API_USE_32BIT_IDS feature is disabled, struct kvm_lapic_state +always uses xAPIC format. + + +4.58 KVM_SET_LAPIC +------------------ + +:Capability: KVM_CAP_IRQCHIP +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_lapic_state (in) +:Returns: 0 on success, -1 on error + +:: + + #define KVM_APIC_REG_SIZE 0x400 + struct kvm_lapic_state { + char regs[KVM_APIC_REG_SIZE]; + }; + +Copies the input argument into the Local APIC registers. The data format +and layout are the same as documented in the architecture manual. + +The format of the APIC ID register (bytes 32-35 of struct kvm_lapic_state's +regs field) depends on the state of the KVM_CAP_X2APIC_API capability. +See the note in KVM_GET_LAPIC. + + +4.59 KVM_IOEVENTFD +------------------ + +:Capability: KVM_CAP_IOEVENTFD +:Architectures: all +:Type: vm ioctl +:Parameters: struct kvm_ioeventfd (in) +:Returns: 0 on success, !0 on error + +This ioctl attaches or detaches an ioeventfd to a legal pio/mmio address +within the guest. A guest write in the registered address will signal the +provided event instead of triggering an exit. + +:: + + struct kvm_ioeventfd { + __u64 datamatch; + __u64 addr; /* legal pio/mmio address */ + __u32 len; /* 0, 1, 2, 4, or 8 bytes */ + __s32 fd; + __u32 flags; + __u8 pad[36]; + }; + +For the special case of virtio-ccw devices on s390, the ioevent is matched +to a subchannel/virtqueue tuple instead. + +The following flags are defined:: + + #define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) + #define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) + #define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) + #define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ + (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) + +If datamatch flag is set, the event will be signaled only if the written value +to the registered address is equal to datamatch in struct kvm_ioeventfd. + +For virtio-ccw devices, addr contains the subchannel id and datamatch the +virtqueue index. + +With KVM_CAP_IOEVENTFD_ANY_LENGTH, a zero length ioeventfd is allowed, and +the kernel will ignore the length of guest write and may get a faster vmexit. +The speedup may only apply to specific architectures, but the ioeventfd will +work anyway. + +4.60 KVM_DIRTY_TLB +------------------ + +:Capability: KVM_CAP_SW_TLB +:Architectures: ppc +:Type: vcpu ioctl +:Parameters: struct kvm_dirty_tlb (in) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_dirty_tlb { + __u64 bitmap; + __u32 num_dirty; + }; + +This must be called whenever userspace has changed an entry in the shared +TLB, prior to calling KVM_RUN on the associated vcpu. + +The "bitmap" field is the userspace address of an array. This array +consists of a number of bits, equal to the total number of TLB entries as +determined by the last successful call to KVM_CONFIG_TLB, rounded up to the +nearest multiple of 64. + +Each bit corresponds to one TLB entry, ordered the same as in the shared TLB +array. + +The array is little-endian: the bit 0 is the least significant bit of the +first byte, bit 8 is the least significant bit of the second byte, etc. +This avoids any complications with differing word sizes. + +The "num_dirty" field is a performance hint for KVM to determine whether it +should skip processing the bitmap and just invalidate everything. It must +be set to the number of set bits in the bitmap. + + +4.62 KVM_CREATE_SPAPR_TCE +------------------------- + +:Capability: KVM_CAP_SPAPR_TCE +:Architectures: powerpc +:Type: vm ioctl +:Parameters: struct kvm_create_spapr_tce (in) +:Returns: file descriptor for manipulating the created TCE table + +This creates a virtual TCE (translation control entry) table, which +is an IOMMU for PAPR-style virtual I/O. It is used to translate +logical addresses used in virtual I/O into guest physical addresses, +and provides a scatter/gather capability for PAPR virtual I/O. + +:: + + /* for KVM_CAP_SPAPR_TCE */ + struct kvm_create_spapr_tce { + __u64 liobn; + __u32 window_size; + }; + +The liobn field gives the logical IO bus number for which to create a +TCE table. The window_size field specifies the size of the DMA window +which this TCE table will translate - the table will contain one 64 +bit TCE entry for every 4kiB of the DMA window. + +When the guest issues an H_PUT_TCE hcall on a liobn for which a TCE +table has been created using this ioctl(), the kernel will handle it +in real mode, updating the TCE table. H_PUT_TCE calls for other +liobns will cause a vm exit and must be handled by userspace. + +The return value is a file descriptor which can be passed to mmap(2) +to map the created TCE table into userspace. This lets userspace read +the entries written by kernel-handled H_PUT_TCE calls, and also lets +userspace update the TCE table directly which is useful in some +circumstances. + + +4.63 KVM_ALLOCATE_RMA +--------------------- + +:Capability: KVM_CAP_PPC_RMA +:Architectures: powerpc +:Type: vm ioctl +:Parameters: struct kvm_allocate_rma (out) +:Returns: file descriptor for mapping the allocated RMA + +This allocates a Real Mode Area (RMA) from the pool allocated at boot +time by the kernel. An RMA is a physically-contiguous, aligned region +of memory used on older POWER processors to provide the memory which +will be accessed by real-mode (MMU off) accesses in a KVM guest. +POWER processors support a set of sizes for the RMA that usually +includes 64MB, 128MB, 256MB and some larger powers of two. + +:: + + /* for KVM_ALLOCATE_RMA */ + struct kvm_allocate_rma { + __u64 rma_size; + }; + +The return value is a file descriptor which can be passed to mmap(2) +to map the allocated RMA into userspace. The mapped area can then be +passed to the KVM_SET_USER_MEMORY_REGION ioctl to establish it as the +RMA for a virtual machine. The size of the RMA in bytes (which is +fixed at host kernel boot time) is returned in the rma_size field of +the argument structure. + +The KVM_CAP_PPC_RMA capability is 1 or 2 if the KVM_ALLOCATE_RMA ioctl +is supported; 2 if the processor requires all virtual machines to have +an RMA, or 1 if the processor can use an RMA but doesn't require it, +because it supports the Virtual RMA (VRMA) facility. + + +4.64 KVM_NMI +------------ + +:Capability: KVM_CAP_USER_NMI +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 on success, -1 on error + +Queues an NMI on the thread's vcpu. Note this is well defined only +when KVM_CREATE_IRQCHIP has not been called, since this is an interface +between the virtual cpu core and virtual local APIC. After KVM_CREATE_IRQCHIP +has been called, this interface is completely emulated within the kernel. + +To use this to emulate the LINT1 input with KVM_CREATE_IRQCHIP, use the +following algorithm: + + - pause the vcpu + - read the local APIC's state (KVM_GET_LAPIC) + - check whether changing LINT1 will queue an NMI (see the LVT entry for LINT1) + - if so, issue KVM_NMI + - resume the vcpu + +Some guests configure the LINT1 NMI input to cause a panic, aiding in +debugging. + + +4.65 KVM_S390_UCAS_MAP +---------------------- + +:Capability: KVM_CAP_S390_UCONTROL +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: struct kvm_s390_ucas_mapping (in) +:Returns: 0 in case of success + +The parameter is defined like this:: + + struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; + }; + +This ioctl maps the memory at "user_addr" with the length "length" to +the vcpu's address space starting at "vcpu_addr". All parameters need to +be aligned by 1 megabyte. + + +4.66 KVM_S390_UCAS_UNMAP +------------------------ + +:Capability: KVM_CAP_S390_UCONTROL +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: struct kvm_s390_ucas_mapping (in) +:Returns: 0 in case of success + +The parameter is defined like this:: + + struct kvm_s390_ucas_mapping { + __u64 user_addr; + __u64 vcpu_addr; + __u64 length; + }; + +This ioctl unmaps the memory in the vcpu's address space starting at +"vcpu_addr" with the length "length". The field "user_addr" is ignored. +All parameters need to be aligned by 1 megabyte. + + +4.67 KVM_S390_VCPU_FAULT +------------------------ + +:Capability: KVM_CAP_S390_UCONTROL +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: vcpu absolute address (in) +:Returns: 0 in case of success + +This call creates a page table entry on the virtual cpu's address space +(for user controlled virtual machines) or the virtual machine's address +space (for regular virtual machines). This only works for minor faults, +thus it's recommended to access subject memory page via the user page +table upfront. This is useful to handle validity intercepts for user +controlled virtual machines to fault in the virtual cpu's lowcore pages +prior to calling the KVM_RUN ioctl. + + +4.68 KVM_SET_ONE_REG +-------------------- + +:Capability: KVM_CAP_ONE_REG +:Architectures: all +:Type: vcpu ioctl +:Parameters: struct kvm_one_reg (in) +:Returns: 0 on success, negative value on failure + +Errors: + + ====== ============================================================ + ENOENT no such register + EINVAL invalid register ID, or no such register or used with VMs in + protected virtualization mode on s390 + EPERM (arm64) register access not allowed before vcpu finalization + EBUSY (riscv) changing register value not allowed after the vcpu + has run at least once + ====== ============================================================ + +(These error codes are indicative only: do not rely on a specific error +code being returned in a specific situation.) + +:: + + struct kvm_one_reg { + __u64 id; + __u64 addr; + }; + +Using this ioctl, a single vcpu register can be set to a specific value +defined by user space with the passed in struct kvm_one_reg, where id +refers to the register identifier as described below and addr is a pointer +to a variable with the respective size. There can be architecture agnostic +and architecture specific registers. Each have their own range of operation +and their own constants and width. To keep track of the implemented +registers, find a list below: + + ======= =============================== ============ + Arch Register Width (bits) + ======= =============================== ============ + PPC KVM_REG_PPC_HIOR 64 + PPC KVM_REG_PPC_IAC1 64 + PPC KVM_REG_PPC_IAC2 64 + PPC KVM_REG_PPC_IAC3 64 + PPC KVM_REG_PPC_IAC4 64 + PPC KVM_REG_PPC_DAC1 64 + PPC KVM_REG_PPC_DAC2 64 + PPC KVM_REG_PPC_DABR 64 + PPC KVM_REG_PPC_DSCR 64 + PPC KVM_REG_PPC_PURR 64 + PPC KVM_REG_PPC_SPURR 64 + PPC KVM_REG_PPC_DAR 64 + PPC KVM_REG_PPC_DSISR 32 + PPC KVM_REG_PPC_AMR 64 + PPC KVM_REG_PPC_UAMOR 64 + PPC KVM_REG_PPC_MMCR0 64 + PPC KVM_REG_PPC_MMCR1 64 + PPC KVM_REG_PPC_MMCRA 64 + PPC KVM_REG_PPC_MMCR2 64 + PPC KVM_REG_PPC_MMCRS 64 + PPC KVM_REG_PPC_MMCR3 64 + PPC KVM_REG_PPC_SIAR 64 + PPC KVM_REG_PPC_SDAR 64 + PPC KVM_REG_PPC_SIER 64 + PPC KVM_REG_PPC_SIER2 64 + PPC KVM_REG_PPC_SIER3 64 + PPC KVM_REG_PPC_PMC1 32 + PPC KVM_REG_PPC_PMC2 32 + PPC KVM_REG_PPC_PMC3 32 + PPC KVM_REG_PPC_PMC4 32 + PPC KVM_REG_PPC_PMC5 32 + PPC KVM_REG_PPC_PMC6 32 + PPC KVM_REG_PPC_PMC7 32 + PPC KVM_REG_PPC_PMC8 32 + PPC KVM_REG_PPC_FPR0 64 + ... + PPC KVM_REG_PPC_FPR31 64 + PPC KVM_REG_PPC_VR0 128 + ... + PPC KVM_REG_PPC_VR31 128 + PPC KVM_REG_PPC_VSR0 128 + ... + PPC KVM_REG_PPC_VSR31 128 + PPC KVM_REG_PPC_FPSCR 64 + PPC KVM_REG_PPC_VSCR 32 + PPC KVM_REG_PPC_VPA_ADDR 64 + PPC KVM_REG_PPC_VPA_SLB 128 + PPC KVM_REG_PPC_VPA_DTL 128 + PPC KVM_REG_PPC_EPCR 32 + PPC KVM_REG_PPC_EPR 32 + PPC KVM_REG_PPC_TCR 32 + PPC KVM_REG_PPC_TSR 32 + PPC KVM_REG_PPC_OR_TSR 32 + PPC KVM_REG_PPC_CLEAR_TSR 32 + PPC KVM_REG_PPC_MAS0 32 + PPC KVM_REG_PPC_MAS1 32 + PPC KVM_REG_PPC_MAS2 64 + PPC KVM_REG_PPC_MAS7_3 64 + PPC KVM_REG_PPC_MAS4 32 + PPC KVM_REG_PPC_MAS6 32 + PPC KVM_REG_PPC_MMUCFG 32 + PPC KVM_REG_PPC_TLB0CFG 32 + PPC KVM_REG_PPC_TLB1CFG 32 + PPC KVM_REG_PPC_TLB2CFG 32 + PPC KVM_REG_PPC_TLB3CFG 32 + PPC KVM_REG_PPC_TLB0PS 32 + PPC KVM_REG_PPC_TLB1PS 32 + PPC KVM_REG_PPC_TLB2PS 32 + PPC KVM_REG_PPC_TLB3PS 32 + PPC KVM_REG_PPC_EPTCFG 32 + PPC KVM_REG_PPC_ICP_STATE 64 + PPC KVM_REG_PPC_VP_STATE 128 + PPC KVM_REG_PPC_TB_OFFSET 64 + PPC KVM_REG_PPC_SPMC1 32 + PPC KVM_REG_PPC_SPMC2 32 + PPC KVM_REG_PPC_IAMR 64 + PPC KVM_REG_PPC_TFHAR 64 + PPC KVM_REG_PPC_TFIAR 64 + PPC KVM_REG_PPC_TEXASR 64 + PPC KVM_REG_PPC_FSCR 64 + PPC KVM_REG_PPC_PSPB 32 + PPC KVM_REG_PPC_EBBHR 64 + PPC KVM_REG_PPC_EBBRR 64 + PPC KVM_REG_PPC_BESCR 64 + PPC KVM_REG_PPC_TAR 64 + PPC KVM_REG_PPC_DPDES 64 + PPC KVM_REG_PPC_DAWR 64 + PPC KVM_REG_PPC_DAWRX 64 + PPC KVM_REG_PPC_CIABR 64 + PPC KVM_REG_PPC_IC 64 + PPC KVM_REG_PPC_VTB 64 + PPC KVM_REG_PPC_CSIGR 64 + PPC KVM_REG_PPC_TACR 64 + PPC KVM_REG_PPC_TCSCR 64 + PPC KVM_REG_PPC_PID 64 + PPC KVM_REG_PPC_ACOP 64 + PPC KVM_REG_PPC_VRSAVE 32 + PPC KVM_REG_PPC_LPCR 32 + PPC KVM_REG_PPC_LPCR_64 64 + PPC KVM_REG_PPC_PPR 64 + PPC KVM_REG_PPC_ARCH_COMPAT 32 + PPC KVM_REG_PPC_DABRX 32 + PPC KVM_REG_PPC_WORT 64 + PPC KVM_REG_PPC_SPRG9 64 + PPC KVM_REG_PPC_DBSR 32 + PPC KVM_REG_PPC_TIDR 64 + PPC KVM_REG_PPC_PSSCR 64 + PPC KVM_REG_PPC_DEC_EXPIRY 64 + PPC KVM_REG_PPC_PTCR 64 + PPC KVM_REG_PPC_DAWR1 64 + PPC KVM_REG_PPC_DAWRX1 64 + PPC KVM_REG_PPC_TM_GPR0 64 + ... + PPC KVM_REG_PPC_TM_GPR31 64 + PPC KVM_REG_PPC_TM_VSR0 128 + ... + PPC KVM_REG_PPC_TM_VSR63 128 + PPC KVM_REG_PPC_TM_CR 64 + PPC KVM_REG_PPC_TM_LR 64 + PPC KVM_REG_PPC_TM_CTR 64 + PPC KVM_REG_PPC_TM_FPSCR 64 + PPC KVM_REG_PPC_TM_AMR 64 + PPC KVM_REG_PPC_TM_PPR 64 + PPC KVM_REG_PPC_TM_VRSAVE 64 + PPC KVM_REG_PPC_TM_VSCR 32 + PPC KVM_REG_PPC_TM_DSCR 64 + PPC KVM_REG_PPC_TM_TAR 64 + PPC KVM_REG_PPC_TM_XER 64 + + MIPS KVM_REG_MIPS_R0 64 + ... + MIPS KVM_REG_MIPS_R31 64 + MIPS KVM_REG_MIPS_HI 64 + MIPS KVM_REG_MIPS_LO 64 + MIPS KVM_REG_MIPS_PC 64 + MIPS KVM_REG_MIPS_CP0_INDEX 32 + MIPS KVM_REG_MIPS_CP0_ENTRYLO0 64 + MIPS KVM_REG_MIPS_CP0_ENTRYLO1 64 + MIPS KVM_REG_MIPS_CP0_CONTEXT 64 + MIPS KVM_REG_MIPS_CP0_CONTEXTCONFIG 32 + MIPS KVM_REG_MIPS_CP0_USERLOCAL 64 + MIPS KVM_REG_MIPS_CP0_XCONTEXTCONFIG 64 + MIPS KVM_REG_MIPS_CP0_PAGEMASK 32 + MIPS KVM_REG_MIPS_CP0_PAGEGRAIN 32 + MIPS KVM_REG_MIPS_CP0_SEGCTL0 64 + MIPS KVM_REG_MIPS_CP0_SEGCTL1 64 + MIPS KVM_REG_MIPS_CP0_SEGCTL2 64 + MIPS KVM_REG_MIPS_CP0_PWBASE 64 + MIPS KVM_REG_MIPS_CP0_PWFIELD 64 + MIPS KVM_REG_MIPS_CP0_PWSIZE 64 + MIPS KVM_REG_MIPS_CP0_WIRED 32 + MIPS KVM_REG_MIPS_CP0_PWCTL 32 + MIPS KVM_REG_MIPS_CP0_HWRENA 32 + MIPS KVM_REG_MIPS_CP0_BADVADDR 64 + MIPS KVM_REG_MIPS_CP0_BADINSTR 32 + MIPS KVM_REG_MIPS_CP0_BADINSTRP 32 + MIPS KVM_REG_MIPS_CP0_COUNT 32 + MIPS KVM_REG_MIPS_CP0_ENTRYHI 64 + MIPS KVM_REG_MIPS_CP0_COMPARE 32 + MIPS KVM_REG_MIPS_CP0_STATUS 32 + MIPS KVM_REG_MIPS_CP0_INTCTL 32 + MIPS KVM_REG_MIPS_CP0_CAUSE 32 + MIPS KVM_REG_MIPS_CP0_EPC 64 + MIPS KVM_REG_MIPS_CP0_PRID 32 + MIPS KVM_REG_MIPS_CP0_EBASE 64 + MIPS KVM_REG_MIPS_CP0_CONFIG 32 + MIPS KVM_REG_MIPS_CP0_CONFIG1 32 + MIPS KVM_REG_MIPS_CP0_CONFIG2 32 + MIPS KVM_REG_MIPS_CP0_CONFIG3 32 + MIPS KVM_REG_MIPS_CP0_CONFIG4 32 + MIPS KVM_REG_MIPS_CP0_CONFIG5 32 + MIPS KVM_REG_MIPS_CP0_CONFIG7 32 + MIPS KVM_REG_MIPS_CP0_XCONTEXT 64 + MIPS KVM_REG_MIPS_CP0_ERROREPC 64 + MIPS KVM_REG_MIPS_CP0_KSCRATCH1 64 + MIPS KVM_REG_MIPS_CP0_KSCRATCH2 64 + MIPS KVM_REG_MIPS_CP0_KSCRATCH3 64 + MIPS KVM_REG_MIPS_CP0_KSCRATCH4 64 + MIPS KVM_REG_MIPS_CP0_KSCRATCH5 64 + MIPS KVM_REG_MIPS_CP0_KSCRATCH6 64 + MIPS KVM_REG_MIPS_CP0_MAAR(0..63) 64 + MIPS KVM_REG_MIPS_COUNT_CTL 64 + MIPS KVM_REG_MIPS_COUNT_RESUME 64 + MIPS KVM_REG_MIPS_COUNT_HZ 64 + MIPS KVM_REG_MIPS_FPR_32(0..31) 32 + MIPS KVM_REG_MIPS_FPR_64(0..31) 64 + MIPS KVM_REG_MIPS_VEC_128(0..31) 128 + MIPS KVM_REG_MIPS_FCR_IR 32 + MIPS KVM_REG_MIPS_FCR_CSR 32 + MIPS KVM_REG_MIPS_MSA_IR 32 + MIPS KVM_REG_MIPS_MSA_CSR 32 + ======= =============================== ============ + +ARM registers are mapped using the lower 32 bits. The upper 16 of that +is the register group type, or coprocessor number: + +ARM core registers have the following id bit patterns:: + + 0x4020 0000 0010 <index into the kvm_regs struct:16> + +ARM 32-bit CP15 registers have the following id bit patterns:: + + 0x4020 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3> + +ARM 64-bit CP15 registers have the following id bit patterns:: + + 0x4030 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3> + +ARM CCSIDR registers are demultiplexed by CSSELR value:: + + 0x4020 0000 0011 00 <csselr:8> + +ARM 32-bit VFP control registers have the following id bit patterns:: + + 0x4020 0000 0012 1 <regno:12> + +ARM 64-bit FP registers have the following id bit patterns:: + + 0x4030 0000 0012 0 <regno:12> + +ARM firmware pseudo-registers have the following bit pattern:: + + 0x4030 0000 0014 <regno:16> + + +arm64 registers are mapped using the lower 32 bits. The upper 16 of +that is the register group type, or coprocessor number: + +arm64 core/FP-SIMD registers have the following id bit patterns. Note +that the size of the access is variable, as the kvm_regs structure +contains elements ranging from 32 to 128 bits. The index is a 32bit +value in the kvm_regs structure seen as a 32bit array:: + + 0x60x0 0000 0010 <index into the kvm_regs struct:16> + +Specifically: + +======================= ========= ===== ======================================= + Encoding Register Bits kvm_regs member +======================= ========= ===== ======================================= + 0x6030 0000 0010 0000 X0 64 regs.regs[0] + 0x6030 0000 0010 0002 X1 64 regs.regs[1] + ... + 0x6030 0000 0010 003c X30 64 regs.regs[30] + 0x6030 0000 0010 003e SP 64 regs.sp + 0x6030 0000 0010 0040 PC 64 regs.pc + 0x6030 0000 0010 0042 PSTATE 64 regs.pstate + 0x6030 0000 0010 0044 SP_EL1 64 sp_el1 + 0x6030 0000 0010 0046 ELR_EL1 64 elr_el1 + 0x6030 0000 0010 0048 SPSR_EL1 64 spsr[KVM_SPSR_EL1] (alias SPSR_SVC) + 0x6030 0000 0010 004a SPSR_ABT 64 spsr[KVM_SPSR_ABT] + 0x6030 0000 0010 004c SPSR_UND 64 spsr[KVM_SPSR_UND] + 0x6030 0000 0010 004e SPSR_IRQ 64 spsr[KVM_SPSR_IRQ] + 0x6060 0000 0010 0050 SPSR_FIQ 64 spsr[KVM_SPSR_FIQ] + 0x6040 0000 0010 0054 V0 128 fp_regs.vregs[0] [1]_ + 0x6040 0000 0010 0058 V1 128 fp_regs.vregs[1] [1]_ + ... + 0x6040 0000 0010 00d0 V31 128 fp_regs.vregs[31] [1]_ + 0x6020 0000 0010 00d4 FPSR 32 fp_regs.fpsr + 0x6020 0000 0010 00d5 FPCR 32 fp_regs.fpcr +======================= ========= ===== ======================================= + +.. [1] These encodings are not accepted for SVE-enabled vcpus. See + KVM_ARM_VCPU_INIT. + + The equivalent register content can be accessed via bits [127:0] of + the corresponding SVE Zn registers instead for vcpus that have SVE + enabled (see below). + +arm64 CCSIDR registers are demultiplexed by CSSELR value:: + + 0x6020 0000 0011 00 <csselr:8> + +arm64 system registers have the following id bit patterns:: + + 0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3> + +.. warning:: + + Two system register IDs do not follow the specified pattern. These + are KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT, which map to + system registers CNTV_CVAL_EL0 and CNTVCT_EL0 respectively. These + two had their values accidentally swapped, which means TIMER_CVAL is + derived from the register encoding for CNTVCT_EL0 and TIMER_CNT is + derived from the register encoding for CNTV_CVAL_EL0. As this is + API, it must remain this way. + +arm64 firmware pseudo-registers have the following bit pattern:: + + 0x6030 0000 0014 <regno:16> + +arm64 SVE registers have the following bit patterns:: + + 0x6080 0000 0015 00 <n:5> <slice:5> Zn bits[2048*slice + 2047 : 2048*slice] + 0x6050 0000 0015 04 <n:4> <slice:5> Pn bits[256*slice + 255 : 256*slice] + 0x6050 0000 0015 060 <slice:5> FFR bits[256*slice + 255 : 256*slice] + 0x6060 0000 0015 ffff KVM_REG_ARM64_SVE_VLS pseudo-register + +Access to register IDs where 2048 * slice >= 128 * max_vq will fail with +ENOENT. max_vq is the vcpu's maximum supported vector length in 128-bit +quadwords: see [2]_ below. + +These registers are only accessible on vcpus for which SVE is enabled. +See KVM_ARM_VCPU_INIT for details. + +In addition, except for KVM_REG_ARM64_SVE_VLS, these registers are not +accessible until the vcpu's SVE configuration has been finalized +using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE). See KVM_ARM_VCPU_INIT +and KVM_ARM_VCPU_FINALIZE for more information about this procedure. + +KVM_REG_ARM64_SVE_VLS is a pseudo-register that allows the set of vector +lengths supported by the vcpu to be discovered and configured by +userspace. When transferred to or from user memory via KVM_GET_ONE_REG +or KVM_SET_ONE_REG, the value of this register is of type +__u64[KVM_ARM64_SVE_VLS_WORDS], and encodes the set of vector lengths as +follows:: + + __u64 vector_lengths[KVM_ARM64_SVE_VLS_WORDS]; + + if (vq >= SVE_VQ_MIN && vq <= SVE_VQ_MAX && + ((vector_lengths[(vq - KVM_ARM64_SVE_VQ_MIN) / 64] >> + ((vq - KVM_ARM64_SVE_VQ_MIN) % 64)) & 1)) + /* Vector length vq * 16 bytes supported */ + else + /* Vector length vq * 16 bytes not supported */ + +.. [2] The maximum value vq for which the above condition is true is + max_vq. This is the maximum vector length available to the guest on + this vcpu, and determines which register slices are visible through + this ioctl interface. + +(See Documentation/arch/arm64/sve.rst for an explanation of the "vq" +nomenclature.) + +KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT. +KVM_ARM_VCPU_INIT initialises it to the best set of vector lengths that +the host supports. + +Userspace may subsequently modify it if desired until the vcpu's SVE +configuration is finalized using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE). + +Apart from simply removing all vector lengths from the host set that +exceed some value, support for arbitrarily chosen sets of vector lengths +is hardware-dependent and may not be available. Attempting to configure +an invalid set of vector lengths via KVM_SET_ONE_REG will fail with +EINVAL. + +After the vcpu's SVE configuration is finalized, further attempts to +write this register will fail with EPERM. + +arm64 bitmap feature firmware pseudo-registers have the following bit pattern:: + + 0x6030 0000 0016 <regno:16> + +The bitmap feature firmware registers exposes the hypercall services that +are available for userspace to configure. The set bits corresponds to the +services that are available for the guests to access. By default, KVM +sets all the supported bits during VM initialization. The userspace can +discover the available services via KVM_GET_ONE_REG, and write back the +bitmap corresponding to the features that it wishes guests to see via +KVM_SET_ONE_REG. + +Note: These registers are immutable once any of the vCPUs of the VM has +run at least once. A KVM_SET_ONE_REG in such a scenario will return +a -EBUSY to userspace. + +(See Documentation/virt/kvm/arm/hypercalls.rst for more details.) + + +MIPS registers are mapped using the lower 32 bits. The upper 16 of that is +the register group type: + +MIPS core registers (see above) have the following id bit patterns:: + + 0x7030 0000 0000 <reg:16> + +MIPS CP0 registers (see KVM_REG_MIPS_CP0_* above) have the following id bit +patterns depending on whether they're 32-bit or 64-bit registers:: + + 0x7020 0000 0001 00 <reg:5> <sel:3> (32-bit) + 0x7030 0000 0001 00 <reg:5> <sel:3> (64-bit) + +Note: KVM_REG_MIPS_CP0_ENTRYLO0 and KVM_REG_MIPS_CP0_ENTRYLO1 are the MIPS64 +versions of the EntryLo registers regardless of the word size of the host +hardware, host kernel, guest, and whether XPA is present in the guest, i.e. +with the RI and XI bits (if they exist) in bits 63 and 62 respectively, and +the PFNX field starting at bit 30. + +MIPS MAARs (see KVM_REG_MIPS_CP0_MAAR(*) above) have the following id bit +patterns:: + + 0x7030 0000 0001 01 <reg:8> + +MIPS KVM control registers (see above) have the following id bit patterns:: + + 0x7030 0000 0002 <reg:16> + +MIPS FPU registers (see KVM_REG_MIPS_FPR_{32,64}() above) have the following +id bit patterns depending on the size of the register being accessed. They are +always accessed according to the current guest FPU mode (Status.FR and +Config5.FRE), i.e. as the guest would see them, and they become unpredictable +if the guest FPU mode is changed. MIPS SIMD Architecture (MSA) vector +registers (see KVM_REG_MIPS_VEC_128() above) have similar patterns as they +overlap the FPU registers:: + + 0x7020 0000 0003 00 <0:3> <reg:5> (32-bit FPU registers) + 0x7030 0000 0003 00 <0:3> <reg:5> (64-bit FPU registers) + 0x7040 0000 0003 00 <0:3> <reg:5> (128-bit MSA vector registers) + +MIPS FPU control registers (see KVM_REG_MIPS_FCR_{IR,CSR} above) have the +following id bit patterns:: + + 0x7020 0000 0003 01 <0:3> <reg:5> + +MIPS MSA control registers (see KVM_REG_MIPS_MSA_{IR,CSR} above) have the +following id bit patterns:: + + 0x7020 0000 0003 02 <0:3> <reg:5> + +RISC-V registers are mapped using the lower 32 bits. The upper 8 bits of +that is the register group type. + +RISC-V config registers are meant for configuring a Guest VCPU and it has +the following id bit patterns:: + + 0x8020 0000 01 <index into the kvm_riscv_config struct:24> (32bit Host) + 0x8030 0000 01 <index into the kvm_riscv_config struct:24> (64bit Host) + +Following are the RISC-V config registers: + +======================= ========= ============================================= + Encoding Register Description +======================= ========= ============================================= + 0x80x0 0000 0100 0000 isa ISA feature bitmap of Guest VCPU +======================= ========= ============================================= + +The isa config register can be read anytime but can only be written before +a Guest VCPU runs. It will have ISA feature bits matching underlying host +set by default. + +RISC-V core registers represent the general execution state of a Guest VCPU +and it has the following id bit patterns:: + + 0x8020 0000 02 <index into the kvm_riscv_core struct:24> (32bit Host) + 0x8030 0000 02 <index into the kvm_riscv_core struct:24> (64bit Host) + +Following are the RISC-V core registers: + +======================= ========= ============================================= + Encoding Register Description +======================= ========= ============================================= + 0x80x0 0000 0200 0000 regs.pc Program counter + 0x80x0 0000 0200 0001 regs.ra Return address + 0x80x0 0000 0200 0002 regs.sp Stack pointer + 0x80x0 0000 0200 0003 regs.gp Global pointer + 0x80x0 0000 0200 0004 regs.tp Task pointer + 0x80x0 0000 0200 0005 regs.t0 Caller saved register 0 + 0x80x0 0000 0200 0006 regs.t1 Caller saved register 1 + 0x80x0 0000 0200 0007 regs.t2 Caller saved register 2 + 0x80x0 0000 0200 0008 regs.s0 Callee saved register 0 + 0x80x0 0000 0200 0009 regs.s1 Callee saved register 1 + 0x80x0 0000 0200 000a regs.a0 Function argument (or return value) 0 + 0x80x0 0000 0200 000b regs.a1 Function argument (or return value) 1 + 0x80x0 0000 0200 000c regs.a2 Function argument 2 + 0x80x0 0000 0200 000d regs.a3 Function argument 3 + 0x80x0 0000 0200 000e regs.a4 Function argument 4 + 0x80x0 0000 0200 000f regs.a5 Function argument 5 + 0x80x0 0000 0200 0010 regs.a6 Function argument 6 + 0x80x0 0000 0200 0011 regs.a7 Function argument 7 + 0x80x0 0000 0200 0012 regs.s2 Callee saved register 2 + 0x80x0 0000 0200 0013 regs.s3 Callee saved register 3 + 0x80x0 0000 0200 0014 regs.s4 Callee saved register 4 + 0x80x0 0000 0200 0015 regs.s5 Callee saved register 5 + 0x80x0 0000 0200 0016 regs.s6 Callee saved register 6 + 0x80x0 0000 0200 0017 regs.s7 Callee saved register 7 + 0x80x0 0000 0200 0018 regs.s8 Callee saved register 8 + 0x80x0 0000 0200 0019 regs.s9 Callee saved register 9 + 0x80x0 0000 0200 001a regs.s10 Callee saved register 10 + 0x80x0 0000 0200 001b regs.s11 Callee saved register 11 + 0x80x0 0000 0200 001c regs.t3 Caller saved register 3 + 0x80x0 0000 0200 001d regs.t4 Caller saved register 4 + 0x80x0 0000 0200 001e regs.t5 Caller saved register 5 + 0x80x0 0000 0200 001f regs.t6 Caller saved register 6 + 0x80x0 0000 0200 0020 mode Privilege mode (1 = S-mode or 0 = U-mode) +======================= ========= ============================================= + +RISC-V csr registers represent the supervisor mode control/status registers +of a Guest VCPU and it has the following id bit patterns:: + + 0x8020 0000 03 <index into the kvm_riscv_csr struct:24> (32bit Host) + 0x8030 0000 03 <index into the kvm_riscv_csr struct:24> (64bit Host) + +Following are the RISC-V csr registers: + +======================= ========= ============================================= + Encoding Register Description +======================= ========= ============================================= + 0x80x0 0000 0300 0000 sstatus Supervisor status + 0x80x0 0000 0300 0001 sie Supervisor interrupt enable + 0x80x0 0000 0300 0002 stvec Supervisor trap vector base + 0x80x0 0000 0300 0003 sscratch Supervisor scratch register + 0x80x0 0000 0300 0004 sepc Supervisor exception program counter + 0x80x0 0000 0300 0005 scause Supervisor trap cause + 0x80x0 0000 0300 0006 stval Supervisor bad address or instruction + 0x80x0 0000 0300 0007 sip Supervisor interrupt pending + 0x80x0 0000 0300 0008 satp Supervisor address translation and protection +======================= ========= ============================================= + +RISC-V timer registers represent the timer state of a Guest VCPU and it has +the following id bit patterns:: + + 0x8030 0000 04 <index into the kvm_riscv_timer struct:24> + +Following are the RISC-V timer registers: + +======================= ========= ============================================= + Encoding Register Description +======================= ========= ============================================= + 0x8030 0000 0400 0000 frequency Time base frequency (read-only) + 0x8030 0000 0400 0001 time Time value visible to Guest + 0x8030 0000 0400 0002 compare Time compare programmed by Guest + 0x8030 0000 0400 0003 state Time compare state (1 = ON or 0 = OFF) +======================= ========= ============================================= + +RISC-V F-extension registers represent the single precision floating point +state of a Guest VCPU and it has the following id bit patterns:: + + 0x8020 0000 05 <index into the __riscv_f_ext_state struct:24> + +Following are the RISC-V F-extension registers: + +======================= ========= ============================================= + Encoding Register Description +======================= ========= ============================================= + 0x8020 0000 0500 0000 f[0] Floating point register 0 + ... + 0x8020 0000 0500 001f f[31] Floating point register 31 + 0x8020 0000 0500 0020 fcsr Floating point control and status register +======================= ========= ============================================= + +RISC-V D-extension registers represent the double precision floating point +state of a Guest VCPU and it has the following id bit patterns:: + + 0x8020 0000 06 <index into the __riscv_d_ext_state struct:24> (fcsr) + 0x8030 0000 06 <index into the __riscv_d_ext_state struct:24> (non-fcsr) + +Following are the RISC-V D-extension registers: + +======================= ========= ============================================= + Encoding Register Description +======================= ========= ============================================= + 0x8030 0000 0600 0000 f[0] Floating point register 0 + ... + 0x8030 0000 0600 001f f[31] Floating point register 31 + 0x8020 0000 0600 0020 fcsr Floating point control and status register +======================= ========= ============================================= + + +4.69 KVM_GET_ONE_REG +-------------------- + +:Capability: KVM_CAP_ONE_REG +:Architectures: all +:Type: vcpu ioctl +:Parameters: struct kvm_one_reg (in and out) +:Returns: 0 on success, negative value on failure + +Errors include: + + ======== ============================================================ + ENOENT no such register + EINVAL invalid register ID, or no such register or used with VMs in + protected virtualization mode on s390 + EPERM (arm64) register access not allowed before vcpu finalization + ======== ============================================================ + +(These error codes are indicative only: do not rely on a specific error +code being returned in a specific situation.) + +This ioctl allows to receive the value of a single register implemented +in a vcpu. The register to read is indicated by the "id" field of the +kvm_one_reg struct passed in. On success, the register value can be found +at the memory location pointed to by "addr". + +The list of registers accessible using this interface is identical to the +list in 4.68. + + +4.70 KVM_KVMCLOCK_CTRL +---------------------- + +:Capability: KVM_CAP_KVMCLOCK_CTRL +:Architectures: Any that implement pvclocks (currently x86 only) +:Type: vcpu ioctl +:Parameters: None +:Returns: 0 on success, -1 on error + +This ioctl sets a flag accessible to the guest indicating that the specified +vCPU has been paused by the host userspace. + +The host will set a flag in the pvclock structure that is checked from the +soft lockup watchdog. The flag is part of the pvclock structure that is +shared between guest and host, specifically the second bit of the flags +field of the pvclock_vcpu_time_info structure. It will be set exclusively by +the host and read/cleared exclusively by the guest. The guest operation of +checking and clearing the flag must be an atomic operation so +load-link/store-conditional, or equivalent must be used. There are two cases +where the guest will clear the flag: when the soft lockup watchdog timer resets +itself or when a soft lockup is detected. This ioctl can be called any time +after pausing the vcpu, but before it is resumed. + + +4.71 KVM_SIGNAL_MSI +------------------- + +:Capability: KVM_CAP_SIGNAL_MSI +:Architectures: x86 arm64 +:Type: vm ioctl +:Parameters: struct kvm_msi (in) +:Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error + +Directly inject a MSI message. Only valid with in-kernel irqchip that handles +MSI messages. + +:: + + struct kvm_msi { + __u32 address_lo; + __u32 address_hi; + __u32 data; + __u32 flags; + __u32 devid; + __u8 pad[12]; + }; + +flags: + KVM_MSI_VALID_DEVID: devid contains a valid value. The per-VM + KVM_CAP_MSI_DEVID capability advertises the requirement to provide + the device ID. If this capability is not available, userspace + should never set the KVM_MSI_VALID_DEVID flag as the ioctl might fail. + +If KVM_MSI_VALID_DEVID is set, devid contains a unique device identifier +for the device that wrote the MSI message. For PCI, this is usually a +BFD identifier in the lower 16 bits. + +On x86, address_hi is ignored unless the KVM_X2APIC_API_USE_32BIT_IDS +feature of KVM_CAP_X2APIC_API capability is enabled. If it is enabled, +address_hi bits 31-8 provide bits 31-8 of the destination id. Bits 7-0 of +address_hi must be zero. + + +4.71 KVM_CREATE_PIT2 +-------------------- + +:Capability: KVM_CAP_PIT2 +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_pit_config (in) +:Returns: 0 on success, -1 on error + +Creates an in-kernel device model for the i8254 PIT. This call is only valid +after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following +parameters have to be passed:: + + struct kvm_pit_config { + __u32 flags; + __u32 pad[15]; + }; + +Valid flags are:: + + #define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */ + +PIT timer interrupts may use a per-VM kernel thread for injection. If it +exists, this thread will have a name of the following pattern:: + + kvm-pit/<owner-process-pid> + +When running a guest with elevated priorities, the scheduling parameters of +this thread may have to be adjusted accordingly. + +This IOCTL replaces the obsolete KVM_CREATE_PIT. + + +4.72 KVM_GET_PIT2 +----------------- + +:Capability: KVM_CAP_PIT_STATE2 +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_pit_state2 (out) +:Returns: 0 on success, -1 on error + +Retrieves the state of the in-kernel PIT model. Only valid after +KVM_CREATE_PIT2. The state is returned in the following structure:: + + struct kvm_pit_state2 { + struct kvm_pit_channel_state channels[3]; + __u32 flags; + __u32 reserved[9]; + }; + +Valid flags are:: + + /* disable PIT in HPET legacy mode */ + #define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001 + /* speaker port data bit enabled */ + #define KVM_PIT_FLAGS_SPEAKER_DATA_ON 0x00000002 + +This IOCTL replaces the obsolete KVM_GET_PIT. + + +4.73 KVM_SET_PIT2 +----------------- + +:Capability: KVM_CAP_PIT_STATE2 +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_pit_state2 (in) +:Returns: 0 on success, -1 on error + +Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2. +See KVM_GET_PIT2 for details on struct kvm_pit_state2. + +This IOCTL replaces the obsolete KVM_SET_PIT. + + +4.74 KVM_PPC_GET_SMMU_INFO +-------------------------- + +:Capability: KVM_CAP_PPC_GET_SMMU_INFO +:Architectures: powerpc +:Type: vm ioctl +:Parameters: None +:Returns: 0 on success, -1 on error + +This populates and returns a structure describing the features of +the "Server" class MMU emulation supported by KVM. +This can in turn be used by userspace to generate the appropriate +device-tree properties for the guest operating system. + +The structure contains some global information, followed by an +array of supported segment page sizes:: + + struct kvm_ppc_smmu_info { + __u64 flags; + __u32 slb_size; + __u32 pad; + struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; + }; + +The supported flags are: + + - KVM_PPC_PAGE_SIZES_REAL: + When that flag is set, guest page sizes must "fit" the backing + store page sizes. When not set, any page size in the list can + be used regardless of how they are backed by userspace. + + - KVM_PPC_1T_SEGMENTS + The emulated MMU supports 1T segments in addition to the + standard 256M ones. + + - KVM_PPC_NO_HASH + This flag indicates that HPT guests are not supported by KVM, + thus all guests must use radix MMU mode. + +The "slb_size" field indicates how many SLB entries are supported + +The "sps" array contains 8 entries indicating the supported base +page sizes for a segment in increasing order. Each entry is defined +as follow:: + + struct kvm_ppc_one_seg_page_size { + __u32 page_shift; /* Base page shift of segment (or 0) */ + __u32 slb_enc; /* SLB encoding for BookS */ + struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ]; + }; + +An entry with a "page_shift" of 0 is unused. Because the array is +organized in increasing order, a lookup can stop when encoutering +such an entry. + +The "slb_enc" field provides the encoding to use in the SLB for the +page size. The bits are in positions such as the value can directly +be OR'ed into the "vsid" argument of the slbmte instruction. + +The "enc" array is a list which for each of those segment base page +size provides the list of supported actual page sizes (which can be +only larger or equal to the base page size), along with the +corresponding encoding in the hash PTE. Similarly, the array is +8 entries sorted by increasing sizes and an entry with a "0" shift +is an empty entry and a terminator:: + + struct kvm_ppc_one_page_size { + __u32 page_shift; /* Page shift (or 0) */ + __u32 pte_enc; /* Encoding in the HPTE (>>12) */ + }; + +The "pte_enc" field provides a value that can OR'ed into the hash +PTE's RPN field (ie, it needs to be shifted left by 12 to OR it +into the hash PTE second double word). + +4.75 KVM_IRQFD +-------------- + +:Capability: KVM_CAP_IRQFD +:Architectures: x86 s390 arm64 +:Type: vm ioctl +:Parameters: struct kvm_irqfd (in) +:Returns: 0 on success, -1 on error + +Allows setting an eventfd to directly trigger a guest interrupt. +kvm_irqfd.fd specifies the file descriptor to use as the eventfd and +kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When +an event is triggered on the eventfd, an interrupt is injected into +the guest using the specified gsi pin. The irqfd is removed using +the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd +and kvm_irqfd.gsi. + +With KVM_CAP_IRQFD_RESAMPLE, KVM_IRQFD supports a de-assert and notify +mechanism allowing emulation of level-triggered, irqfd-based +interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an +additional eventfd in the kvm_irqfd.resamplefd field. When operating +in resample mode, posting of an interrupt through kvm_irq.fd asserts +the specified gsi in the irqchip. When the irqchip is resampled, such +as from an EOI, the gsi is de-asserted and the user is notified via +kvm_irqfd.resamplefd. It is the user's responsibility to re-queue +the interrupt if the device making use of it still requires service. +Note that closing the resamplefd is not sufficient to disable the +irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment +and need not be specified with KVM_IRQFD_FLAG_DEASSIGN. + +On arm64, gsi routing being supported, the following can happen: + +- in case no routing entry is associated to this gsi, injection fails +- in case the gsi is associated to an irqchip routing entry, + irqchip.pin + 32 corresponds to the injected SPI ID. +- in case the gsi is associated to an MSI routing entry, the MSI + message and device ID are translated into an LPI (support restricted + to GICv3 ITS in-kernel emulation). + +4.76 KVM_PPC_ALLOCATE_HTAB +-------------------------- + +:Capability: KVM_CAP_PPC_ALLOC_HTAB +:Architectures: powerpc +:Type: vm ioctl +:Parameters: Pointer to u32 containing hash table order (in/out) +:Returns: 0 on success, -1 on error + +This requests the host kernel to allocate an MMU hash table for a +guest using the PAPR paravirtualization interface. This only does +anything if the kernel is configured to use the Book 3S HV style of +virtualization. Otherwise the capability doesn't exist and the ioctl +returns an ENOTTY error. The rest of this description assumes Book 3S +HV. + +There must be no vcpus running when this ioctl is called; if there +are, it will do nothing and return an EBUSY error. + +The parameter is a pointer to a 32-bit unsigned integer variable +containing the order (log base 2) of the desired size of the hash +table, which must be between 18 and 46. On successful return from the +ioctl, the value will not be changed by the kernel. + +If no hash table has been allocated when any vcpu is asked to run +(with the KVM_RUN ioctl), the host kernel will allocate a +default-sized hash table (16 MB). + +If this ioctl is called when a hash table has already been allocated, +with a different order from the existing hash table, the existing hash +table will be freed and a new one allocated. If this is ioctl is +called when a hash table has already been allocated of the same order +as specified, the kernel will clear out the existing hash table (zero +all HPTEs). In either case, if the guest is using the virtualized +real-mode area (VRMA) facility, the kernel will re-create the VMRA +HPTEs on the next KVM_RUN of any vcpu. + +4.77 KVM_S390_INTERRUPT +----------------------- + +:Capability: basic +:Architectures: s390 +:Type: vm ioctl, vcpu ioctl +:Parameters: struct kvm_s390_interrupt (in) +:Returns: 0 on success, -1 on error + +Allows to inject an interrupt to the guest. Interrupts can be floating +(vm ioctl) or per cpu (vcpu ioctl), depending on the interrupt type. + +Interrupt parameters are passed via kvm_s390_interrupt:: + + struct kvm_s390_interrupt { + __u32 type; + __u32 parm; + __u64 parm64; + }; + +type can be one of the following: + +KVM_S390_SIGP_STOP (vcpu) + - sigp stop; optional flags in parm +KVM_S390_PROGRAM_INT (vcpu) + - program check; code in parm +KVM_S390_SIGP_SET_PREFIX (vcpu) + - sigp set prefix; prefix address in parm +KVM_S390_RESTART (vcpu) + - restart +KVM_S390_INT_CLOCK_COMP (vcpu) + - clock comparator interrupt +KVM_S390_INT_CPU_TIMER (vcpu) + - CPU timer interrupt +KVM_S390_INT_VIRTIO (vm) + - virtio external interrupt; external interrupt + parameters in parm and parm64 +KVM_S390_INT_SERVICE (vm) + - sclp external interrupt; sclp parameter in parm +KVM_S390_INT_EMERGENCY (vcpu) + - sigp emergency; source cpu in parm +KVM_S390_INT_EXTERNAL_CALL (vcpu) + - sigp external call; source cpu in parm +KVM_S390_INT_IO(ai,cssid,ssid,schid) (vm) + - compound value to indicate an + I/O interrupt (ai - adapter interrupt; cssid,ssid,schid - subchannel); + I/O interruption parameters in parm (subchannel) and parm64 (intparm, + interruption subclass) +KVM_S390_MCHK (vm, vcpu) + - machine check interrupt; cr 14 bits in parm, machine check interrupt + code in parm64 (note that machine checks needing further payload are not + supported by this ioctl) + +This is an asynchronous vcpu ioctl and can be invoked from any thread. + +4.78 KVM_PPC_GET_HTAB_FD +------------------------ + +:Capability: KVM_CAP_PPC_HTAB_FD +:Architectures: powerpc +:Type: vm ioctl +:Parameters: Pointer to struct kvm_get_htab_fd (in) +:Returns: file descriptor number (>= 0) on success, -1 on error + +This returns a file descriptor that can be used either to read out the +entries in the guest's hashed page table (HPT), or to write entries to +initialize the HPT. The returned fd can only be written to if the +KVM_GET_HTAB_WRITE bit is set in the flags field of the argument, and +can only be read if that bit is clear. The argument struct looks like +this:: + + /* For KVM_PPC_GET_HTAB_FD */ + struct kvm_get_htab_fd { + __u64 flags; + __u64 start_index; + __u64 reserved[2]; + }; + + /* Values for kvm_get_htab_fd.flags */ + #define KVM_GET_HTAB_BOLTED_ONLY ((__u64)0x1) + #define KVM_GET_HTAB_WRITE ((__u64)0x2) + +The 'start_index' field gives the index in the HPT of the entry at +which to start reading. It is ignored when writing. + +Reads on the fd will initially supply information about all +"interesting" HPT entries. Interesting entries are those with the +bolted bit set, if the KVM_GET_HTAB_BOLTED_ONLY bit is set, otherwise +all entries. When the end of the HPT is reached, the read() will +return. If read() is called again on the fd, it will start again from +the beginning of the HPT, but will only return HPT entries that have +changed since they were last read. + +Data read or written is structured as a header (8 bytes) followed by a +series of valid HPT entries (16 bytes) each. The header indicates how +many valid HPT entries there are and how many invalid entries follow +the valid entries. The invalid entries are not represented explicitly +in the stream. The header format is:: + + struct kvm_get_htab_header { + __u32 index; + __u16 n_valid; + __u16 n_invalid; + }; + +Writes to the fd create HPT entries starting at the index given in the +header; first 'n_valid' valid entries with contents from the data +written, then 'n_invalid' invalid entries, invalidating any previously +valid entries found. + +4.79 KVM_CREATE_DEVICE +---------------------- + +:Capability: KVM_CAP_DEVICE_CTRL +:Architectures: all +:Type: vm ioctl +:Parameters: struct kvm_create_device (in/out) +:Returns: 0 on success, -1 on error + +Errors: + + ====== ======================================================= + ENODEV The device type is unknown or unsupported + EEXIST Device already created, and this type of device may not + be instantiated multiple times + ====== ======================================================= + + Other error conditions may be defined by individual device types or + have their standard meanings. + +Creates an emulated device in the kernel. The file descriptor returned +in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR. + +If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the +device type is supported (not necessarily whether it can be created +in the current vm). + +Individual devices should not define flags. Attributes should be used +for specifying any behavior that is not implied by the device type +number. + +:: + + struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ + }; + +4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR +-------------------------------------------- + +:Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, + KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device (no set) +:Architectures: x86, arm64, s390 +:Type: device ioctl, vm ioctl, vcpu ioctl +:Parameters: struct kvm_device_attr +:Returns: 0 on success, -1 on error + +Errors: + + ===== ============================================================= + ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + EPERM The attribute cannot (currently) be accessed this way + (e.g. read-only attribute, or attribute that only makes + sense when the device is in a different state) + ===== ============================================================= + + Other error conditions may be defined by individual device types. + +Gets/sets a specified piece of device configuration and/or state. The +semantics are device-specific. See individual device documentation in +the "devices" directory. As with ONE_REG, the size of the data +transferred is defined by the particular attribute. + +:: + + struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ + }; + +4.81 KVM_HAS_DEVICE_ATTR +------------------------ + +:Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, + KVM_CAP_VCPU_ATTRIBUTES for vcpu device + KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device +:Type: device ioctl, vm ioctl, vcpu ioctl +:Parameters: struct kvm_device_attr +:Returns: 0 on success, -1 on error + +Errors: + + ===== ============================================================= + ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + ===== ============================================================= + +Tests whether a device supports a particular attribute. A successful +return indicates the attribute is implemented. It does not necessarily +indicate that the attribute can be read or written in the device's +current state. "addr" is ignored. + +4.82 KVM_ARM_VCPU_INIT +---------------------- + +:Capability: basic +:Architectures: arm64 +:Type: vcpu ioctl +:Parameters: struct kvm_vcpu_init (in) +:Returns: 0 on success; -1 on error + +Errors: + + ====== ================================================================= + EINVAL the target is unknown, or the combination of features is invalid. + ENOENT a features bit specified is unknown. + ====== ================================================================= + +This tells KVM what type of CPU to present to the guest, and what +optional features it should have. This will cause a reset of the cpu +registers to their initial values. If this is not called, KVM_RUN will +return ENOEXEC for that vcpu. + +The initial values are defined as: + - Processor state: + * AArch64: EL1h, D, A, I and F bits set. All other bits + are cleared. + * AArch32: SVC, A, I and F bits set. All other bits are + cleared. + - General Purpose registers, including PC and SP: set to 0 + - FPSIMD/NEON registers: set to 0 + - SVE registers: set to 0 + - System registers: Reset to their architecturally defined + values as for a warm reset to EL1 (resp. SVC) + +Note that because some registers reflect machine topology, all vcpus +should be created before this ioctl is invoked. + +Userspace can call this function multiple times for a given vcpu, including +after the vcpu has been run. This will reset the vcpu to its initial +state. All calls to this function after the initial call must use the same +target and same set of feature flags, otherwise EINVAL will be returned. + +Possible features: + + - KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state. + Depends on KVM_CAP_ARM_PSCI. If not set, the CPU will be powered on + and execute guest code when KVM_RUN is called. + - KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode. + Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only). + - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 (or a future revision + backward compatible with v0.2) for the CPU. + Depends on KVM_CAP_ARM_PSCI_0_2. + - KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU. + Depends on KVM_CAP_ARM_PMU_V3. + + - KVM_ARM_VCPU_PTRAUTH_ADDRESS: Enables Address Pointer authentication + for arm64 only. + Depends on KVM_CAP_ARM_PTRAUTH_ADDRESS. + If KVM_CAP_ARM_PTRAUTH_ADDRESS and KVM_CAP_ARM_PTRAUTH_GENERIC are + both present, then both KVM_ARM_VCPU_PTRAUTH_ADDRESS and + KVM_ARM_VCPU_PTRAUTH_GENERIC must be requested or neither must be + requested. + + - KVM_ARM_VCPU_PTRAUTH_GENERIC: Enables Generic Pointer authentication + for arm64 only. + Depends on KVM_CAP_ARM_PTRAUTH_GENERIC. + If KVM_CAP_ARM_PTRAUTH_ADDRESS and KVM_CAP_ARM_PTRAUTH_GENERIC are + both present, then both KVM_ARM_VCPU_PTRAUTH_ADDRESS and + KVM_ARM_VCPU_PTRAUTH_GENERIC must be requested or neither must be + requested. + + - KVM_ARM_VCPU_SVE: Enables SVE for the CPU (arm64 only). + Depends on KVM_CAP_ARM_SVE. + Requires KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE): + + * After KVM_ARM_VCPU_INIT: + + - KVM_REG_ARM64_SVE_VLS may be read using KVM_GET_ONE_REG: the + initial value of this pseudo-register indicates the best set of + vector lengths possible for a vcpu on this host. + + * Before KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE): + + - KVM_RUN and KVM_GET_REG_LIST are not available; + + - KVM_GET_ONE_REG and KVM_SET_ONE_REG cannot be used to access + the scalable archietctural SVE registers + KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() or + KVM_REG_ARM64_SVE_FFR; + + - KVM_REG_ARM64_SVE_VLS may optionally be written using + KVM_SET_ONE_REG, to modify the set of vector lengths available + for the vcpu. + + * After KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE): + + - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can + no longer be written using KVM_SET_ONE_REG. + +4.83 KVM_ARM_PREFERRED_TARGET +----------------------------- + +:Capability: basic +:Architectures: arm64 +:Type: vm ioctl +:Parameters: struct kvm_vcpu_init (out) +:Returns: 0 on success; -1 on error + +Errors: + + ====== ========================================== + ENODEV no preferred target available for the host + ====== ========================================== + +This queries KVM for preferred CPU target type which can be emulated +by KVM on underlying host. + +The ioctl returns struct kvm_vcpu_init instance containing information +about preferred CPU target type and recommended features for it. The +kvm_vcpu_init->features bitmap returned will have feature bits set if +the preferred target recommends setting these features, but this is +not mandatory. + +The information returned by this ioctl can be used to prepare an instance +of struct kvm_vcpu_init for KVM_ARM_VCPU_INIT ioctl which will result in +VCPU matching underlying host. + + +4.84 KVM_GET_REG_LIST +--------------------- + +:Capability: basic +:Architectures: arm64, mips, riscv +:Type: vcpu ioctl +:Parameters: struct kvm_reg_list (in/out) +:Returns: 0 on success; -1 on error + +Errors: + + ===== ============================================================== + E2BIG the reg index list is too big to fit in the array specified by + the user (the number required will be written into n). + ===== ============================================================== + +:: + + struct kvm_reg_list { + __u64 n; /* number of registers in reg[] */ + __u64 reg[0]; + }; + +This ioctl returns the guest registers that are supported for the +KVM_GET_ONE_REG/KVM_SET_ONE_REG calls. + + +4.85 KVM_ARM_SET_DEVICE_ADDR (deprecated) +----------------------------------------- + +:Capability: KVM_CAP_ARM_SET_DEVICE_ADDR +:Architectures: arm64 +:Type: vm ioctl +:Parameters: struct kvm_arm_device_address (in) +:Returns: 0 on success, -1 on error + +Errors: + + ====== ============================================ + ENODEV The device id is unknown + ENXIO Device not supported on current system + EEXIST Address already set + E2BIG Address outside guest physical address space + EBUSY Address overlaps with other device range + ====== ============================================ + +:: + + struct kvm_arm_device_addr { + __u64 id; + __u64 addr; + }; + +Specify a device address in the guest's physical address space where guests +can access emulated or directly exposed devices, which the host kernel needs +to know about. The id field is an architecture specific identifier for a +specific device. + +arm64 divides the id field into two parts, a device id and an +address type id specific to the individual device:: + + bits: | 63 ... 32 | 31 ... 16 | 15 ... 0 | + field: | 0x00000000 | device id | addr type id | + +arm64 currently only require this when using the in-kernel GIC +support for the hardware VGIC features, using KVM_ARM_DEVICE_VGIC_V2 +as the device id. When setting the base address for the guest's +mapping of the VGIC virtual CPU and distributor interface, the ioctl +must be called after calling KVM_CREATE_IRQCHIP, but before calling +KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the +base addresses will return -EEXIST. + +Note, this IOCTL is deprecated and the more flexible SET/GET_DEVICE_ATTR API +should be used instead. + + +4.86 KVM_PPC_RTAS_DEFINE_TOKEN +------------------------------ + +:Capability: KVM_CAP_PPC_RTAS +:Architectures: ppc +:Type: vm ioctl +:Parameters: struct kvm_rtas_token_args +:Returns: 0 on success, -1 on error + +Defines a token value for a RTAS (Run Time Abstraction Services) +service in order to allow it to be handled in the kernel. The +argument struct gives the name of the service, which must be the name +of a service that has a kernel-side implementation. If the token +value is non-zero, it will be associated with that service, and +subsequent RTAS calls by the guest specifying that token will be +handled by the kernel. If the token value is 0, then any token +associated with the service will be forgotten, and subsequent RTAS +calls by the guest for that service will be passed to userspace to be +handled. + +4.87 KVM_SET_GUEST_DEBUG +------------------------ + +:Capability: KVM_CAP_SET_GUEST_DEBUG +:Architectures: x86, s390, ppc, arm64 +:Type: vcpu ioctl +:Parameters: struct kvm_guest_debug (in) +:Returns: 0 on success; -1 on error + +:: + + struct kvm_guest_debug { + __u32 control; + __u32 pad; + struct kvm_guest_debug_arch arch; + }; + +Set up the processor specific debug registers and configure vcpu for +handling guest debug events. There are two parts to the structure, the +first a control bitfield indicates the type of debug events to handle +when running. Common control bits are: + + - KVM_GUESTDBG_ENABLE: guest debugging is enabled + - KVM_GUESTDBG_SINGLESTEP: the next run should single-step + +The top 16 bits of the control field are architecture specific control +flags which can include the following: + + - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64] + - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390] + - KVM_GUESTDBG_USE_HW: using hardware debug events [arm64] + - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86] + - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86] + - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390] + - KVM_GUESTDBG_BLOCKIRQ: avoid injecting interrupts/NMI/SMI [x86] + +For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints +are enabled in memory so we need to ensure breakpoint exceptions are +correctly trapped and the KVM run loop exits at the breakpoint and not +running off into the normal guest vector. For KVM_GUESTDBG_USE_HW_BP +we need to ensure the guest vCPUs architecture specific registers are +updated to the correct (supplied) values. + +The second part of the structure is architecture specific and +typically contains a set of debug registers. + +For arm64 the number of debug registers is implementation defined and +can be determined by querying the KVM_CAP_GUEST_DEBUG_HW_BPS and +KVM_CAP_GUEST_DEBUG_HW_WPS capabilities which return a positive number +indicating the number of supported registers. + +For ppc, the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability indicates whether +the single-step debug event (KVM_GUESTDBG_SINGLESTEP) is supported. + +Also when supported, KVM_CAP_SET_GUEST_DEBUG2 capability indicates the +supported KVM_GUESTDBG_* bits in the control field. + +When debug events exit the main run loop with the reason +KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run +structure containing architecture specific debug information. + +4.88 KVM_GET_EMULATED_CPUID +--------------------------- + +:Capability: KVM_CAP_EXT_EMUL_CPUID +:Architectures: x86 +:Type: system ioctl +:Parameters: struct kvm_cpuid2 (in/out) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_cpuid2 { + __u32 nent; + __u32 flags; + struct kvm_cpuid_entry2 entries[0]; + }; + +The member 'flags' is used for passing flags from userspace. + +:: + + #define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0) + #define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1) /* deprecated */ + #define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2) /* deprecated */ + + struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; + }; + +This ioctl returns x86 cpuid features which are emulated by +kvm.Userspace can use the information returned by this ioctl to query +which features are emulated by kvm instead of being present natively. + +Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2 +structure with the 'nent' field indicating the number of entries in +the variable-size array 'entries'. If the number of entries is too low +to describe the cpu capabilities, an error (E2BIG) is returned. If the +number is too high, the 'nent' field is adjusted and an error (ENOMEM) +is returned. If the number is just right, the 'nent' field is adjusted +to the number of valid entries in the 'entries' array, which is then +filled. + +The entries returned are the set CPUID bits of the respective features +which kvm emulates, as returned by the CPUID instruction, with unknown +or unsupported feature bits cleared. + +Features like x2apic, for example, may not be present in the host cpu +but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be +emulated efficiently and thus not included here. + +The fields in each entry are defined as follows: + + function: + the eax value used to obtain the entry + index: + the ecx value used to obtain the entry (for entries that are + affected by ecx) + flags: + an OR of zero or more of the following: + + KVM_CPUID_FLAG_SIGNIFCANT_INDEX: + if the index field is valid + + eax, ebx, ecx, edx: + + the values returned by the cpuid instruction for + this function/index combination + +4.89 KVM_S390_MEM_OP +-------------------- + +:Capability: KVM_CAP_S390_MEM_OP, KVM_CAP_S390_PROTECTED, KVM_CAP_S390_MEM_OP_EXTENSION +:Architectures: s390 +:Type: vm ioctl, vcpu ioctl +:Parameters: struct kvm_s390_mem_op (in) +:Returns: = 0 on success, + < 0 on generic error (e.g. -EFAULT or -ENOMEM), + 16 bit program exception code if the access causes such an exception + +Read or write data from/to the VM's memory. +The KVM_CAP_S390_MEM_OP_EXTENSION capability specifies what functionality is +supported. + +Parameters are specified via the following structure:: + + struct kvm_s390_mem_op { + __u64 gaddr; /* the guest address */ + __u64 flags; /* flags */ + __u32 size; /* amount of bytes */ + __u32 op; /* type of operation */ + __u64 buf; /* buffer in userspace */ + union { + struct { + __u8 ar; /* the access register number */ + __u8 key; /* access key, ignored if flag unset */ + __u8 pad1[6]; /* ignored */ + __u64 old_addr; /* ignored if flag unset */ + }; + __u32 sida_offset; /* offset into the sida */ + __u8 reserved[32]; /* ignored */ + }; + }; + +The start address of the memory region has to be specified in the "gaddr" +field, and the length of the region in the "size" field (which must not +be 0). The maximum value for "size" can be obtained by checking the +KVM_CAP_S390_MEM_OP capability. "buf" is the buffer supplied by the +userspace application where the read data should be written to for +a read access, or where the data that should be written is stored for +a write access. The "reserved" field is meant for future extensions. +Reserved and unused values are ignored. Future extension that add members must +introduce new flags. + +The type of operation is specified in the "op" field. Flags modifying +their behavior can be set in the "flags" field. Undefined flag bits must +be set to 0. + +Possible operations are: + * ``KVM_S390_MEMOP_LOGICAL_READ`` + * ``KVM_S390_MEMOP_LOGICAL_WRITE`` + * ``KVM_S390_MEMOP_ABSOLUTE_READ`` + * ``KVM_S390_MEMOP_ABSOLUTE_WRITE`` + * ``KVM_S390_MEMOP_SIDA_READ`` + * ``KVM_S390_MEMOP_SIDA_WRITE`` + * ``KVM_S390_MEMOP_ABSOLUTE_CMPXCHG`` + +Logical read/write: +^^^^^^^^^^^^^^^^^^^ + +Access logical memory, i.e. translate the given guest address to an absolute +address given the state of the VCPU and use the absolute address as target of +the access. "ar" designates the access register number to be used; the valid +range is 0..15. +Logical accesses are permitted for the VCPU ioctl only. +Logical accesses are permitted for non-protected guests only. + +Supported flags: + * ``KVM_S390_MEMOP_F_CHECK_ONLY`` + * ``KVM_S390_MEMOP_F_INJECT_EXCEPTION`` + * ``KVM_S390_MEMOP_F_SKEY_PROTECTION`` + +The KVM_S390_MEMOP_F_CHECK_ONLY flag can be set to check whether the +corresponding memory access would cause an access exception; however, +no actual access to the data in memory at the destination is performed. +In this case, "buf" is unused and can be NULL. + +In case an access exception occurred during the access (or would occur +in case of KVM_S390_MEMOP_F_CHECK_ONLY), the ioctl returns a positive +error number indicating the type of exception. This exception is also +raised directly at the corresponding VCPU if the flag +KVM_S390_MEMOP_F_INJECT_EXCEPTION is set. +On protection exceptions, unless specified otherwise, the injected +translation-exception identifier (TEID) indicates suppression. + +If the KVM_S390_MEMOP_F_SKEY_PROTECTION flag is set, storage key +protection is also in effect and may cause exceptions if accesses are +prohibited given the access key designated by "key"; the valid range is 0..15. +KVM_S390_MEMOP_F_SKEY_PROTECTION is available if KVM_CAP_S390_MEM_OP_EXTENSION +is > 0. +Since the accessed memory may span multiple pages and those pages might have +different storage keys, it is possible that a protection exception occurs +after memory has been modified. In this case, if the exception is injected, +the TEID does not indicate suppression. + +Absolute read/write: +^^^^^^^^^^^^^^^^^^^^ + +Access absolute memory. This operation is intended to be used with the +KVM_S390_MEMOP_F_SKEY_PROTECTION flag, to allow accessing memory and performing +the checks required for storage key protection as one operation (as opposed to +user space getting the storage keys, performing the checks, and accessing +memory thereafter, which could lead to a delay between check and access). +Absolute accesses are permitted for the VM ioctl if KVM_CAP_S390_MEM_OP_EXTENSION +has the KVM_S390_MEMOP_EXTENSION_CAP_BASE bit set. +Currently absolute accesses are not permitted for VCPU ioctls. +Absolute accesses are permitted for non-protected guests only. + +Supported flags: + * ``KVM_S390_MEMOP_F_CHECK_ONLY`` + * ``KVM_S390_MEMOP_F_SKEY_PROTECTION`` + +The semantics of the flags common with logical accesses are as for logical +accesses. + +Absolute cmpxchg: +^^^^^^^^^^^^^^^^^ + +Perform cmpxchg on absolute guest memory. Intended for use with the +KVM_S390_MEMOP_F_SKEY_PROTECTION flag. +Instead of doing an unconditional write, the access occurs only if the target +location contains the value pointed to by "old_addr". +This is performed as an atomic cmpxchg with the length specified by the "size" +parameter. "size" must be a power of two up to and including 16. +If the exchange did not take place because the target value doesn't match the +old value, the value "old_addr" points to is replaced by the target value. +User space can tell if an exchange took place by checking if this replacement +occurred. The cmpxchg op is permitted for the VM ioctl if +KVM_CAP_S390_MEM_OP_EXTENSION has flag KVM_S390_MEMOP_EXTENSION_CAP_CMPXCHG set. + +Supported flags: + * ``KVM_S390_MEMOP_F_SKEY_PROTECTION`` + +SIDA read/write: +^^^^^^^^^^^^^^^^ + +Access the secure instruction data area which contains memory operands necessary +for instruction emulation for protected guests. +SIDA accesses are available if the KVM_CAP_S390_PROTECTED capability is available. +SIDA accesses are permitted for the VCPU ioctl only. +SIDA accesses are permitted for protected guests only. + +No flags are supported. + +4.90 KVM_S390_GET_SKEYS +----------------------- + +:Capability: KVM_CAP_S390_SKEYS +:Architectures: s390 +:Type: vm ioctl +:Parameters: struct kvm_s390_skeys +:Returns: 0 on success, KVM_S390_GET_SKEYS_NONE if guest is not using storage + keys, negative value on error + +This ioctl is used to get guest storage key values on the s390 +architecture. The ioctl takes parameters via the kvm_s390_skeys struct:: + + struct kvm_s390_skeys { + __u64 start_gfn; + __u64 count; + __u64 skeydata_addr; + __u32 flags; + __u32 reserved[9]; + }; + +The start_gfn field is the number of the first guest frame whose storage keys +you want to get. + +The count field is the number of consecutive frames (starting from start_gfn) +whose storage keys to get. The count field must be at least 1 and the maximum +allowed value is defined as KVM_S390_SKEYS_MAX. Values outside this range +will cause the ioctl to return -EINVAL. + +The skeydata_addr field is the address to a buffer large enough to hold count +bytes. This buffer will be filled with storage key data by the ioctl. + +4.91 KVM_S390_SET_SKEYS +----------------------- + +:Capability: KVM_CAP_S390_SKEYS +:Architectures: s390 +:Type: vm ioctl +:Parameters: struct kvm_s390_skeys +:Returns: 0 on success, negative value on error + +This ioctl is used to set guest storage key values on the s390 +architecture. The ioctl takes parameters via the kvm_s390_skeys struct. +See section on KVM_S390_GET_SKEYS for struct definition. + +The start_gfn field is the number of the first guest frame whose storage keys +you want to set. + +The count field is the number of consecutive frames (starting from start_gfn) +whose storage keys to get. The count field must be at least 1 and the maximum +allowed value is defined as KVM_S390_SKEYS_MAX. Values outside this range +will cause the ioctl to return -EINVAL. + +The skeydata_addr field is the address to a buffer containing count bytes of +storage keys. Each byte in the buffer will be set as the storage key for a +single frame starting at start_gfn for count frames. + +Note: If any architecturally invalid key value is found in the given data then +the ioctl will return -EINVAL. + +4.92 KVM_S390_IRQ +----------------- + +:Capability: KVM_CAP_S390_INJECT_IRQ +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: struct kvm_s390_irq (in) +:Returns: 0 on success, -1 on error + +Errors: + + + ====== ================================================================= + EINVAL interrupt type is invalid + type is KVM_S390_SIGP_STOP and flag parameter is invalid value, + type is KVM_S390_INT_EXTERNAL_CALL and code is bigger + than the maximum of VCPUs + EBUSY type is KVM_S390_SIGP_SET_PREFIX and vcpu is not stopped, + type is KVM_S390_SIGP_STOP and a stop irq is already pending, + type is KVM_S390_INT_EXTERNAL_CALL and an external call interrupt + is already pending + ====== ================================================================= + +Allows to inject an interrupt to the guest. + +Using struct kvm_s390_irq as a parameter allows +to inject additional payload which is not +possible via KVM_S390_INTERRUPT. + +Interrupt parameters are passed via kvm_s390_irq:: + + struct kvm_s390_irq { + __u64 type; + union { + struct kvm_s390_io_info io; + struct kvm_s390_ext_info ext; + struct kvm_s390_pgm_info pgm; + struct kvm_s390_emerg_info emerg; + struct kvm_s390_extcall_info extcall; + struct kvm_s390_prefix_info prefix; + struct kvm_s390_stop_info stop; + struct kvm_s390_mchk_info mchk; + char reserved[64]; + } u; + }; + +type can be one of the following: + +- KVM_S390_SIGP_STOP - sigp stop; parameter in .stop +- KVM_S390_PROGRAM_INT - program check; parameters in .pgm +- KVM_S390_SIGP_SET_PREFIX - sigp set prefix; parameters in .prefix +- KVM_S390_RESTART - restart; no parameters +- KVM_S390_INT_CLOCK_COMP - clock comparator interrupt; no parameters +- KVM_S390_INT_CPU_TIMER - CPU timer interrupt; no parameters +- KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg +- KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall +- KVM_S390_MCHK - machine check interrupt; parameters in .mchk + +This is an asynchronous vcpu ioctl and can be invoked from any thread. + +4.94 KVM_S390_GET_IRQ_STATE +--------------------------- + +:Capability: KVM_CAP_S390_IRQ_STATE +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: struct kvm_s390_irq_state (out) +:Returns: >= number of bytes copied into buffer, + -EINVAL if buffer size is 0, + -ENOBUFS if buffer size is too small to fit all pending interrupts, + -EFAULT if the buffer address was invalid + +This ioctl allows userspace to retrieve the complete state of all currently +pending interrupts in a single buffer. Use cases include migration +and introspection. The parameter structure contains the address of a +userspace buffer and its length:: + + struct kvm_s390_irq_state { + __u64 buf; + __u32 flags; /* will stay unused for compatibility reasons */ + __u32 len; + __u32 reserved[4]; /* will stay unused for compatibility reasons */ + }; + +Userspace passes in the above struct and for each pending interrupt a +struct kvm_s390_irq is copied to the provided buffer. + +The structure contains a flags and a reserved field for future extensions. As +the kernel never checked for flags == 0 and QEMU never pre-zeroed flags and +reserved, these fields can not be used in the future without breaking +compatibility. + +If -ENOBUFS is returned the buffer provided was too small and userspace +may retry with a bigger buffer. + +4.95 KVM_S390_SET_IRQ_STATE +--------------------------- + +:Capability: KVM_CAP_S390_IRQ_STATE +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: struct kvm_s390_irq_state (in) +:Returns: 0 on success, + -EFAULT if the buffer address was invalid, + -EINVAL for an invalid buffer length (see below), + -EBUSY if there were already interrupts pending, + errors occurring when actually injecting the + interrupt. See KVM_S390_IRQ. + +This ioctl allows userspace to set the complete state of all cpu-local +interrupts currently pending for the vcpu. It is intended for restoring +interrupt state after a migration. The input parameter is a userspace buffer +containing a struct kvm_s390_irq_state:: + + struct kvm_s390_irq_state { + __u64 buf; + __u32 flags; /* will stay unused for compatibility reasons */ + __u32 len; + __u32 reserved[4]; /* will stay unused for compatibility reasons */ + }; + +The restrictions for flags and reserved apply as well. +(see KVM_S390_GET_IRQ_STATE) + +The userspace memory referenced by buf contains a struct kvm_s390_irq +for each interrupt to be injected into the guest. +If one of the interrupts could not be injected for some reason the +ioctl aborts. + +len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0 +and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq), +which is the maximum number of possibly pending cpu-local interrupts. + +4.96 KVM_SMI +------------ + +:Capability: KVM_CAP_X86_SMM +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 on success, -1 on error + +Queues an SMI on the thread's vcpu. + +4.97 KVM_X86_SET_MSR_FILTER +---------------------------- + +:Capability: KVM_CAP_X86_MSR_FILTER +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_msr_filter +:Returns: 0 on success, < 0 on error + +:: + + struct kvm_msr_filter_range { + #define KVM_MSR_FILTER_READ (1 << 0) + #define KVM_MSR_FILTER_WRITE (1 << 1) + __u32 flags; + __u32 nmsrs; /* number of msrs in bitmap */ + __u32 base; /* MSR index the bitmap starts at */ + __u8 *bitmap; /* a 1 bit allows the operations in flags, 0 denies */ + }; + + #define KVM_MSR_FILTER_MAX_RANGES 16 + struct kvm_msr_filter { + #define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0) + #define KVM_MSR_FILTER_DEFAULT_DENY (1 << 0) + __u32 flags; + struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES]; + }; + +flags values for ``struct kvm_msr_filter_range``: + +``KVM_MSR_FILTER_READ`` + + Filter read accesses to MSRs using the given bitmap. A 0 in the bitmap + indicates that read accesses should be denied, while a 1 indicates that + a read for a particular MSR should be allowed regardless of the default + filter action. + +``KVM_MSR_FILTER_WRITE`` + + Filter write accesses to MSRs using the given bitmap. A 0 in the bitmap + indicates that write accesses should be denied, while a 1 indicates that + a write for a particular MSR should be allowed regardless of the default + filter action. + +flags values for ``struct kvm_msr_filter``: + +``KVM_MSR_FILTER_DEFAULT_ALLOW`` + + If no filter range matches an MSR index that is getting accessed, KVM will + allow accesses to all MSRs by default. + +``KVM_MSR_FILTER_DEFAULT_DENY`` + + If no filter range matches an MSR index that is getting accessed, KVM will + deny accesses to all MSRs by default. + +This ioctl allows userspace to define up to 16 bitmaps of MSR ranges to deny +guest MSR accesses that would normally be allowed by KVM. If an MSR is not +covered by a specific range, the "default" filtering behavior applies. Each +bitmap range covers MSRs from [base .. base+nmsrs). + +If an MSR access is denied by userspace, the resulting KVM behavior depends on +whether or not KVM_CAP_X86_USER_SPACE_MSR's KVM_MSR_EXIT_REASON_FILTER is +enabled. If KVM_MSR_EXIT_REASON_FILTER is enabled, KVM will exit to userspace +on denied accesses, i.e. userspace effectively intercepts the MSR access. If +KVM_MSR_EXIT_REASON_FILTER is not enabled, KVM will inject a #GP into the guest +on denied accesses. + +If an MSR access is allowed by userspace, KVM will emulate and/or virtualize +the access in accordance with the vCPU model. Note, KVM may still ultimately +inject a #GP if an access is allowed by userspace, e.g. if KVM doesn't support +the MSR, or to follow architectural behavior for the MSR. + +By default, KVM operates in KVM_MSR_FILTER_DEFAULT_ALLOW mode with no MSR range +filters. + +Calling this ioctl with an empty set of ranges (all nmsrs == 0) disables MSR +filtering. In that mode, ``KVM_MSR_FILTER_DEFAULT_DENY`` is invalid and causes +an error. + +.. warning:: + MSR accesses as part of nested VM-Enter/VM-Exit are not filtered. + This includes both writes to individual VMCS fields and reads/writes + through the MSR lists pointed to by the VMCS. + + x2APIC MSR accesses cannot be filtered (KVM silently ignores filters that + cover any x2APIC MSRs). + +Note, invoking this ioctl while a vCPU is running is inherently racy. However, +KVM does guarantee that vCPUs will see either the previous filter or the new +filter, e.g. MSRs with identical settings in both the old and new filter will +have deterministic behavior. + +Similarly, if userspace wishes to intercept on denied accesses, +KVM_MSR_EXIT_REASON_FILTER must be enabled before activating any filters, and +left enabled until after all filters are deactivated. Failure to do so may +result in KVM injecting a #GP instead of exiting to userspace. + +4.98 KVM_CREATE_SPAPR_TCE_64 +---------------------------- + +:Capability: KVM_CAP_SPAPR_TCE_64 +:Architectures: powerpc +:Type: vm ioctl +:Parameters: struct kvm_create_spapr_tce_64 (in) +:Returns: file descriptor for manipulating the created TCE table + +This is an extension for KVM_CAP_SPAPR_TCE which only supports 32bit +windows, described in 4.62 KVM_CREATE_SPAPR_TCE + +This capability uses extended struct in ioctl interface:: + + /* for KVM_CAP_SPAPR_TCE_64 */ + struct kvm_create_spapr_tce_64 { + __u64 liobn; + __u32 page_shift; + __u32 flags; + __u64 offset; /* in pages */ + __u64 size; /* in pages */ + }; + +The aim of extension is to support an additional bigger DMA window with +a variable page size. +KVM_CREATE_SPAPR_TCE_64 receives a 64bit window size, an IOMMU page shift and +a bus offset of the corresponding DMA window, @size and @offset are numbers +of IOMMU pages. + +@flags are not used at the moment. + +The rest of functionality is identical to KVM_CREATE_SPAPR_TCE. + +4.99 KVM_REINJECT_CONTROL +------------------------- + +:Capability: KVM_CAP_REINJECT_CONTROL +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_reinject_control (in) +:Returns: 0 on success, + -EFAULT if struct kvm_reinject_control cannot be read, + -ENXIO if KVM_CREATE_PIT or KVM_CREATE_PIT2 didn't succeed earlier. + +i8254 (PIT) has two modes, reinject and !reinject. The default is reinject, +where KVM queues elapsed i8254 ticks and monitors completion of interrupt from +vector(s) that i8254 injects. Reinject mode dequeues a tick and injects its +interrupt whenever there isn't a pending interrupt from i8254. +!reinject mode injects an interrupt as soon as a tick arrives. + +:: + + struct kvm_reinject_control { + __u8 pit_reinject; + __u8 reserved[31]; + }; + +pit_reinject = 0 (!reinject mode) is recommended, unless running an old +operating system that uses the PIT for timing (e.g. Linux 2.4.x). + +4.100 KVM_PPC_CONFIGURE_V3_MMU +------------------------------ + +:Capability: KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 +:Architectures: ppc +:Type: vm ioctl +:Parameters: struct kvm_ppc_mmuv3_cfg (in) +:Returns: 0 on success, + -EFAULT if struct kvm_ppc_mmuv3_cfg cannot be read, + -EINVAL if the configuration is invalid + +This ioctl controls whether the guest will use radix or HPT (hashed +page table) translation, and sets the pointer to the process table for +the guest. + +:: + + struct kvm_ppc_mmuv3_cfg { + __u64 flags; + __u64 process_table; + }; + +There are two bits that can be set in flags; KVM_PPC_MMUV3_RADIX and +KVM_PPC_MMUV3_GTSE. KVM_PPC_MMUV3_RADIX, if set, configures the guest +to use radix tree translation, and if clear, to use HPT translation. +KVM_PPC_MMUV3_GTSE, if set and if KVM permits it, configures the guest +to be able to use the global TLB and SLB invalidation instructions; +if clear, the guest may not use these instructions. + +The process_table field specifies the address and size of the guest +process table, which is in the guest's space. This field is formatted +as the second doubleword of the partition table entry, as defined in +the Power ISA V3.00, Book III section 5.7.6.1. + +4.101 KVM_PPC_GET_RMMU_INFO +--------------------------- + +:Capability: KVM_CAP_PPC_RADIX_MMU +:Architectures: ppc +:Type: vm ioctl +:Parameters: struct kvm_ppc_rmmu_info (out) +:Returns: 0 on success, + -EFAULT if struct kvm_ppc_rmmu_info cannot be written, + -EINVAL if no useful information can be returned + +This ioctl returns a structure containing two things: (a) a list +containing supported radix tree geometries, and (b) a list that maps +page sizes to put in the "AP" (actual page size) field for the tlbie +(TLB invalidate entry) instruction. + +:: + + struct kvm_ppc_rmmu_info { + struct kvm_ppc_radix_geom { + __u8 page_shift; + __u8 level_bits[4]; + __u8 pad[3]; + } geometries[8]; + __u32 ap_encodings[8]; + }; + +The geometries[] field gives up to 8 supported geometries for the +radix page table, in terms of the log base 2 of the smallest page +size, and the number of bits indexed at each level of the tree, from +the PTE level up to the PGD level in that order. Any unused entries +will have 0 in the page_shift field. + +The ap_encodings gives the supported page sizes and their AP field +encodings, encoded with the AP value in the top 3 bits and the log +base 2 of the page size in the bottom 6 bits. + +4.102 KVM_PPC_RESIZE_HPT_PREPARE +-------------------------------- + +:Capability: KVM_CAP_SPAPR_RESIZE_HPT +:Architectures: powerpc +:Type: vm ioctl +:Parameters: struct kvm_ppc_resize_hpt (in) +:Returns: 0 on successful completion, + >0 if a new HPT is being prepared, the value is an estimated + number of milliseconds until preparation is complete, + -EFAULT if struct kvm_reinject_control cannot be read, + -EINVAL if the supplied shift or flags are invalid, + -ENOMEM if unable to allocate the new HPT, + +Used to implement the PAPR extension for runtime resizing of a guest's +Hashed Page Table (HPT). Specifically this starts, stops or monitors +the preparation of a new potential HPT for the guest, essentially +implementing the H_RESIZE_HPT_PREPARE hypercall. + +:: + + struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; + }; + +If called with shift > 0 when there is no pending HPT for the guest, +this begins preparation of a new pending HPT of size 2^(shift) bytes. +It then returns a positive integer with the estimated number of +milliseconds until preparation is complete. + +If called when there is a pending HPT whose size does not match that +requested in the parameters, discards the existing pending HPT and +creates a new one as above. + +If called when there is a pending HPT of the size requested, will: + + * If preparation of the pending HPT is already complete, return 0 + * If preparation of the pending HPT has failed, return an error + code, then discard the pending HPT. + * If preparation of the pending HPT is still in progress, return an + estimated number of milliseconds until preparation is complete. + +If called with shift == 0, discards any currently pending HPT and +returns 0 (i.e. cancels any in-progress preparation). + +flags is reserved for future expansion, currently setting any bits in +flags will result in an -EINVAL. + +Normally this will be called repeatedly with the same parameters until +it returns <= 0. The first call will initiate preparation, subsequent +ones will monitor preparation until it completes or fails. + +4.103 KVM_PPC_RESIZE_HPT_COMMIT +------------------------------- + +:Capability: KVM_CAP_SPAPR_RESIZE_HPT +:Architectures: powerpc +:Type: vm ioctl +:Parameters: struct kvm_ppc_resize_hpt (in) +:Returns: 0 on successful completion, + -EFAULT if struct kvm_reinject_control cannot be read, + -EINVAL if the supplied shift or flags are invalid, + -ENXIO is there is no pending HPT, or the pending HPT doesn't + have the requested size, + -EBUSY if the pending HPT is not fully prepared, + -ENOSPC if there was a hash collision when moving existing + HPT entries to the new HPT, + -EIO on other error conditions + +Used to implement the PAPR extension for runtime resizing of a guest's +Hashed Page Table (HPT). Specifically this requests that the guest be +transferred to working with the new HPT, essentially implementing the +H_RESIZE_HPT_COMMIT hypercall. + +:: + + struct kvm_ppc_resize_hpt { + __u64 flags; + __u32 shift; + __u32 pad; + }; + +This should only be called after KVM_PPC_RESIZE_HPT_PREPARE has +returned 0 with the same parameters. In other cases +KVM_PPC_RESIZE_HPT_COMMIT will return an error (usually -ENXIO or +-EBUSY, though others may be possible if the preparation was started, +but failed). + +This will have undefined effects on the guest if it has not already +placed itself in a quiescent state where no vcpu will make MMU enabled +memory accesses. + +On succsful completion, the pending HPT will become the guest's active +HPT and the previous HPT will be discarded. + +On failure, the guest will still be operating on its previous HPT. + +4.104 KVM_X86_GET_MCE_CAP_SUPPORTED +----------------------------------- + +:Capability: KVM_CAP_MCE +:Architectures: x86 +:Type: system ioctl +:Parameters: u64 mce_cap (out) +:Returns: 0 on success, -1 on error + +Returns supported MCE capabilities. The u64 mce_cap parameter +has the same format as the MSR_IA32_MCG_CAP register. Supported +capabilities will have the corresponding bits set. + +4.105 KVM_X86_SETUP_MCE +----------------------- + +:Capability: KVM_CAP_MCE +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: u64 mcg_cap (in) +:Returns: 0 on success, + -EFAULT if u64 mcg_cap cannot be read, + -EINVAL if the requested number of banks is invalid, + -EINVAL if requested MCE capability is not supported. + +Initializes MCE support for use. The u64 mcg_cap parameter +has the same format as the MSR_IA32_MCG_CAP register and +specifies which capabilities should be enabled. The maximum +supported number of error-reporting banks can be retrieved when +checking for KVM_CAP_MCE. The supported capabilities can be +retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED. + +4.106 KVM_X86_SET_MCE +--------------------- + +:Capability: KVM_CAP_MCE +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_x86_mce (in) +:Returns: 0 on success, + -EFAULT if struct kvm_x86_mce cannot be read, + -EINVAL if the bank number is invalid, + -EINVAL if VAL bit is not set in status field. + +Inject a machine check error (MCE) into the guest. The input +parameter is:: + + struct kvm_x86_mce { + __u64 status; + __u64 addr; + __u64 misc; + __u64 mcg_status; + __u8 bank; + __u8 pad1[7]; + __u64 pad2[3]; + }; + +If the MCE being reported is an uncorrected error, KVM will +inject it as an MCE exception into the guest. If the guest +MCG_STATUS register reports that an MCE is in progress, KVM +causes an KVM_EXIT_SHUTDOWN vmexit. + +Otherwise, if the MCE is a corrected error, KVM will just +store it in the corresponding bank (provided this bank is +not holding a previously reported uncorrected error). + +4.107 KVM_S390_GET_CMMA_BITS +---------------------------- + +:Capability: KVM_CAP_S390_CMMA_MIGRATION +:Architectures: s390 +:Type: vm ioctl +:Parameters: struct kvm_s390_cmma_log (in, out) +:Returns: 0 on success, a negative value on error + +Errors: + + ====== ============================================================= + ENOMEM not enough memory can be allocated to complete the task + ENXIO if CMMA is not enabled + EINVAL if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled + EINVAL if KVM_S390_CMMA_PEEK is not set but dirty tracking has been + disabled (and thus migration mode was automatically disabled) + EFAULT if the userspace address is invalid or if no page table is + present for the addresses (e.g. when using hugepages). + ====== ============================================================= + +This ioctl is used to get the values of the CMMA bits on the s390 +architecture. It is meant to be used in two scenarios: + +- During live migration to save the CMMA values. Live migration needs + to be enabled via the KVM_REQ_START_MIGRATION VM property. +- To non-destructively peek at the CMMA values, with the flag + KVM_S390_CMMA_PEEK set. + +The ioctl takes parameters via the kvm_s390_cmma_log struct. The desired +values are written to a buffer whose location is indicated via the "values" +member in the kvm_s390_cmma_log struct. The values in the input struct are +also updated as needed. + +Each CMMA value takes up one byte. + +:: + + struct kvm_s390_cmma_log { + __u64 start_gfn; + __u32 count; + __u32 flags; + union { + __u64 remaining; + __u64 mask; + }; + __u64 values; + }; + +start_gfn is the number of the first guest frame whose CMMA values are +to be retrieved, + +count is the length of the buffer in bytes, + +values points to the buffer where the result will be written to. + +If count is greater than KVM_S390_SKEYS_MAX, then it is considered to be +KVM_S390_SKEYS_MAX. KVM_S390_SKEYS_MAX is re-used for consistency with +other ioctls. + +The result is written in the buffer pointed to by the field values, and +the values of the input parameter are updated as follows. + +Depending on the flags, different actions are performed. The only +supported flag so far is KVM_S390_CMMA_PEEK. + +The default behaviour if KVM_S390_CMMA_PEEK is not set is: +start_gfn will indicate the first page frame whose CMMA bits were dirty. +It is not necessarily the same as the one passed as input, as clean pages +are skipped. + +count will indicate the number of bytes actually written in the buffer. +It can (and very often will) be smaller than the input value, since the +buffer is only filled until 16 bytes of clean values are found (which +are then not copied in the buffer). Since a CMMA migration block needs +the base address and the length, for a total of 16 bytes, we will send +back some clean data if there is some dirty data afterwards, as long as +the size of the clean data does not exceed the size of the header. This +allows to minimize the amount of data to be saved or transferred over +the network at the expense of more roundtrips to userspace. The next +invocation of the ioctl will skip over all the clean values, saving +potentially more than just the 16 bytes we found. + +If KVM_S390_CMMA_PEEK is set: +the existing storage attributes are read even when not in migration +mode, and no other action is performed; + +the output start_gfn will be equal to the input start_gfn, + +the output count will be equal to the input count, except if the end of +memory has been reached. + +In both cases: +the field "remaining" will indicate the total number of dirty CMMA values +still remaining, or 0 if KVM_S390_CMMA_PEEK is set and migration mode is +not enabled. + +mask is unused. + +values points to the userspace buffer where the result will be stored. + +4.108 KVM_S390_SET_CMMA_BITS +---------------------------- + +:Capability: KVM_CAP_S390_CMMA_MIGRATION +:Architectures: s390 +:Type: vm ioctl +:Parameters: struct kvm_s390_cmma_log (in) +:Returns: 0 on success, a negative value on error + +This ioctl is used to set the values of the CMMA bits on the s390 +architecture. It is meant to be used during live migration to restore +the CMMA values, but there are no restrictions on its use. +The ioctl takes parameters via the kvm_s390_cmma_values struct. +Each CMMA value takes up one byte. + +:: + + struct kvm_s390_cmma_log { + __u64 start_gfn; + __u32 count; + __u32 flags; + union { + __u64 remaining; + __u64 mask; + }; + __u64 values; + }; + +start_gfn indicates the starting guest frame number, + +count indicates how many values are to be considered in the buffer, + +flags is not used and must be 0. + +mask indicates which PGSTE bits are to be considered. + +remaining is not used. + +values points to the buffer in userspace where to store the values. + +This ioctl can fail with -ENOMEM if not enough memory can be allocated to +complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if +the count field is too large (e.g. more than KVM_S390_CMMA_SIZE_MAX) or +if the flags field was not 0, with -EFAULT if the userspace address is +invalid, if invalid pages are written to (e.g. after the end of memory) +or if no page table is present for the addresses (e.g. when using +hugepages). + +4.109 KVM_PPC_GET_CPU_CHAR +-------------------------- + +:Capability: KVM_CAP_PPC_GET_CPU_CHAR +:Architectures: powerpc +:Type: vm ioctl +:Parameters: struct kvm_ppc_cpu_char (out) +:Returns: 0 on successful completion, + -EFAULT if struct kvm_ppc_cpu_char cannot be written + +This ioctl gives userspace information about certain characteristics +of the CPU relating to speculative execution of instructions and +possible information leakage resulting from speculative execution (see +CVE-2017-5715, CVE-2017-5753 and CVE-2017-5754). The information is +returned in struct kvm_ppc_cpu_char, which looks like this:: + + struct kvm_ppc_cpu_char { + __u64 character; /* characteristics of the CPU */ + __u64 behaviour; /* recommended software behaviour */ + __u64 character_mask; /* valid bits in character */ + __u64 behaviour_mask; /* valid bits in behaviour */ + }; + +For extensibility, the character_mask and behaviour_mask fields +indicate which bits of character and behaviour have been filled in by +the kernel. If the set of defined bits is extended in future then +userspace will be able to tell whether it is running on a kernel that +knows about the new bits. + +The character field describes attributes of the CPU which can help +with preventing inadvertent information disclosure - specifically, +whether there is an instruction to flash-invalidate the L1 data cache +(ori 30,30,0 or mtspr SPRN_TRIG2,rN), whether the L1 data cache is set +to a mode where entries can only be used by the thread that created +them, whether the bcctr[l] instruction prevents speculation, and +whether a speculation barrier instruction (ori 31,31,0) is provided. + +The behaviour field describes actions that software should take to +prevent inadvertent information disclosure, and thus describes which +vulnerabilities the hardware is subject to; specifically whether the +L1 data cache should be flushed when returning to user mode from the +kernel, and whether a speculation barrier should be placed between an +array bounds check and the array access. + +These fields use the same bit definitions as the new +H_GET_CPU_CHARACTERISTICS hypercall. + +4.110 KVM_MEMORY_ENCRYPT_OP +--------------------------- + +:Capability: basic +:Architectures: x86 +:Type: vm +:Parameters: an opaque platform specific structure (in/out) +:Returns: 0 on success; -1 on error + +If the platform supports creating encrypted VMs then this ioctl can be used +for issuing platform-specific memory encryption commands to manage those +encrypted VMs. + +Currently, this ioctl is used for issuing Secure Encrypted Virtualization +(SEV) commands on AMD Processors. The SEV commands are defined in +Documentation/virt/kvm/x86/amd-memory-encryption.rst. + +4.111 KVM_MEMORY_ENCRYPT_REG_REGION +----------------------------------- + +:Capability: basic +:Architectures: x86 +:Type: system +:Parameters: struct kvm_enc_region (in) +:Returns: 0 on success; -1 on error + +This ioctl can be used to register a guest memory region which may +contain encrypted data (e.g. guest RAM, SMRAM etc). + +It is used in the SEV-enabled guest. When encryption is enabled, a guest +memory region may contain encrypted data. The SEV memory encryption +engine uses a tweak such that two identical plaintext pages, each at +different locations will have differing ciphertexts. So swapping or +moving ciphertext of those pages will not result in plaintext being +swapped. So relocating (or migrating) physical backing pages for the SEV +guest will require some additional steps. + +Note: The current SEV key management spec does not provide commands to +swap or migrate (move) ciphertext pages. Hence, for now we pin the guest +memory region registered with the ioctl. + +4.112 KVM_MEMORY_ENCRYPT_UNREG_REGION +------------------------------------- + +:Capability: basic +:Architectures: x86 +:Type: system +:Parameters: struct kvm_enc_region (in) +:Returns: 0 on success; -1 on error + +This ioctl can be used to unregister the guest memory region registered +with KVM_MEMORY_ENCRYPT_REG_REGION ioctl above. + +4.113 KVM_HYPERV_EVENTFD +------------------------ + +:Capability: KVM_CAP_HYPERV_EVENTFD +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_hyperv_eventfd (in) + +This ioctl (un)registers an eventfd to receive notifications from the guest on +the specified Hyper-V connection id through the SIGNAL_EVENT hypercall, without +causing a user exit. SIGNAL_EVENT hypercall with non-zero event flag number +(bits 24-31) still triggers a KVM_EXIT_HYPERV_HCALL user exit. + +:: + + struct kvm_hyperv_eventfd { + __u32 conn_id; + __s32 fd; + __u32 flags; + __u32 padding[3]; + }; + +The conn_id field should fit within 24 bits:: + + #define KVM_HYPERV_CONN_ID_MASK 0x00ffffff + +The acceptable values for the flags field are:: + + #define KVM_HYPERV_EVENTFD_DEASSIGN (1 << 0) + +:Returns: 0 on success, + -EINVAL if conn_id or flags is outside the allowed range, + -ENOENT on deassign if the conn_id isn't registered, + -EEXIST on assign if the conn_id is already registered + +4.114 KVM_GET_NESTED_STATE +-------------------------- + +:Capability: KVM_CAP_NESTED_STATE +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_nested_state (in/out) +:Returns: 0 on success, -1 on error + +Errors: + + ===== ============================================================= + E2BIG the total state size exceeds the value of 'size' specified by + the user; the size required will be written into size. + ===== ============================================================= + +:: + + struct kvm_nested_state { + __u16 flags; + __u16 format; + __u32 size; + + union { + struct kvm_vmx_nested_state_hdr vmx; + struct kvm_svm_nested_state_hdr svm; + + /* Pad the header to 128 bytes. */ + __u8 pad[120]; + } hdr; + + union { + struct kvm_vmx_nested_state_data vmx[0]; + struct kvm_svm_nested_state_data svm[0]; + } data; + }; + + #define KVM_STATE_NESTED_GUEST_MODE 0x00000001 + #define KVM_STATE_NESTED_RUN_PENDING 0x00000002 + #define KVM_STATE_NESTED_EVMCS 0x00000004 + + #define KVM_STATE_NESTED_FORMAT_VMX 0 + #define KVM_STATE_NESTED_FORMAT_SVM 1 + + #define KVM_STATE_NESTED_VMX_VMCS_SIZE 0x1000 + + #define KVM_STATE_NESTED_VMX_SMM_GUEST_MODE 0x00000001 + #define KVM_STATE_NESTED_VMX_SMM_VMXON 0x00000002 + + #define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001 + + struct kvm_vmx_nested_state_hdr { + __u64 vmxon_pa; + __u64 vmcs12_pa; + + struct { + __u16 flags; + } smm; + + __u32 flags; + __u64 preemption_timer_deadline; + }; + + struct kvm_vmx_nested_state_data { + __u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE]; + __u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE]; + }; + +This ioctl copies the vcpu's nested virtualization state from the kernel to +userspace. + +The maximum size of the state can be retrieved by passing KVM_CAP_NESTED_STATE +to the KVM_CHECK_EXTENSION ioctl(). + +4.115 KVM_SET_NESTED_STATE +-------------------------- + +:Capability: KVM_CAP_NESTED_STATE +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_nested_state (in) +:Returns: 0 on success, -1 on error + +This copies the vcpu's kvm_nested_state struct from userspace to the kernel. +For the definition of struct kvm_nested_state, see KVM_GET_NESTED_STATE. + +4.116 KVM_(UN)REGISTER_COALESCED_MMIO +------------------------------------- + +:Capability: KVM_CAP_COALESCED_MMIO (for coalesced mmio) + KVM_CAP_COALESCED_PIO (for coalesced pio) +:Architectures: all +:Type: vm ioctl +:Parameters: struct kvm_coalesced_mmio_zone +:Returns: 0 on success, < 0 on error + +Coalesced I/O is a performance optimization that defers hardware +register write emulation so that userspace exits are avoided. It is +typically used to reduce the overhead of emulating frequently accessed +hardware registers. + +When a hardware register is configured for coalesced I/O, write accesses +do not exit to userspace and their value is recorded in a ring buffer +that is shared between kernel and userspace. + +Coalesced I/O is used if one or more write accesses to a hardware +register can be deferred until a read or a write to another hardware +register on the same device. This last access will cause a vmexit and +userspace will process accesses from the ring buffer before emulating +it. That will avoid exiting to userspace on repeated writes. + +Coalesced pio is based on coalesced mmio. There is little difference +between coalesced mmio and pio except that coalesced pio records accesses +to I/O ports. + +4.117 KVM_CLEAR_DIRTY_LOG (vm ioctl) +------------------------------------ + +:Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 +:Architectures: x86, arm64, mips +:Type: vm ioctl +:Parameters: struct kvm_clear_dirty_log (in) +:Returns: 0 on success, -1 on error + +:: + + /* for KVM_CLEAR_DIRTY_LOG */ + struct kvm_clear_dirty_log { + __u32 slot; + __u32 num_pages; + __u64 first_page; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; + }; + +The ioctl clears the dirty status of pages in a memory slot, according to +the bitmap that is passed in struct kvm_clear_dirty_log's dirty_bitmap +field. Bit 0 of the bitmap corresponds to page "first_page" in the +memory slot, and num_pages is the size in bits of the input bitmap. +first_page must be a multiple of 64; num_pages must also be a multiple of +64 unless first_page + num_pages is the size of the memory slot. For each +bit that is set in the input bitmap, the corresponding page is marked "clean" +in KVM's dirty bitmap, and dirty tracking is re-enabled for that page +(for example via write-protection, or by clearing the dirty bit in +a page table entry). + +If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of slot field specifies +the address space for which you want to clear the dirty status. See +KVM_SET_USER_MEMORY_REGION for details on the usage of slot field. + +This ioctl is mostly useful when KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 +is enabled; for more information, see the description of the capability. +However, it can always be used as long as KVM_CHECK_EXTENSION confirms +that KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is present. + +4.118 KVM_GET_SUPPORTED_HV_CPUID +-------------------------------- + +:Capability: KVM_CAP_HYPERV_CPUID (vcpu), KVM_CAP_SYS_HYPERV_CPUID (system) +:Architectures: x86 +:Type: system ioctl, vcpu ioctl +:Parameters: struct kvm_cpuid2 (in/out) +:Returns: 0 on success, -1 on error + +:: + + struct kvm_cpuid2 { + __u32 nent; + __u32 padding; + struct kvm_cpuid_entry2 entries[0]; + }; + + struct kvm_cpuid_entry2 { + __u32 function; + __u32 index; + __u32 flags; + __u32 eax; + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 padding[3]; + }; + +This ioctl returns x86 cpuid features leaves related to Hyper-V emulation in +KVM. Userspace can use the information returned by this ioctl to construct +cpuid information presented to guests consuming Hyper-V enlightenments (e.g. +Windows or Hyper-V guests). + +CPUID feature leaves returned by this ioctl are defined by Hyper-V Top Level +Functional Specification (TLFS). These leaves can't be obtained with +KVM_GET_SUPPORTED_CPUID ioctl because some of them intersect with KVM feature +leaves (0x40000000, 0x40000001). + +Currently, the following list of CPUID leaves are returned: + + - HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS + - HYPERV_CPUID_INTERFACE + - HYPERV_CPUID_VERSION + - HYPERV_CPUID_FEATURES + - HYPERV_CPUID_ENLIGHTMENT_INFO + - HYPERV_CPUID_IMPLEMENT_LIMITS + - HYPERV_CPUID_NESTED_FEATURES + - HYPERV_CPUID_SYNDBG_VENDOR_AND_MAX_FUNCTIONS + - HYPERV_CPUID_SYNDBG_INTERFACE + - HYPERV_CPUID_SYNDBG_PLATFORM_CAPABILITIES + +Userspace invokes KVM_GET_SUPPORTED_HV_CPUID by passing a kvm_cpuid2 structure +with the 'nent' field indicating the number of entries in the variable-size +array 'entries'. If the number of entries is too low to describe all Hyper-V +feature leaves, an error (E2BIG) is returned. If the number is more or equal +to the number of Hyper-V feature leaves, the 'nent' field is adjusted to the +number of valid entries in the 'entries' array, which is then filled. + +'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved, +userspace should not expect to get any particular value there. + +Note, vcpu version of KVM_GET_SUPPORTED_HV_CPUID is currently deprecated. Unlike +system ioctl which exposes all supported feature bits unconditionally, vcpu +version has the following quirks: + +- HYPERV_CPUID_NESTED_FEATURES leaf and HV_X64_ENLIGHTENED_VMCS_RECOMMENDED + feature bit are only exposed when Enlightened VMCS was previously enabled + on the corresponding vCPU (KVM_CAP_HYPERV_ENLIGHTENED_VMCS). +- HV_STIMER_DIRECT_MODE_AVAILABLE bit is only exposed with in-kernel LAPIC. + (presumes KVM_CREATE_IRQCHIP has already been called). + +4.119 KVM_ARM_VCPU_FINALIZE +--------------------------- + +:Architectures: arm64 +:Type: vcpu ioctl +:Parameters: int feature (in) +:Returns: 0 on success, -1 on error + +Errors: + + ====== ============================================================== + EPERM feature not enabled, needs configuration, or already finalized + EINVAL feature unknown or not present + ====== ============================================================== + +Recognised values for feature: + + ===== =========================================== + arm64 KVM_ARM_VCPU_SVE (requires KVM_CAP_ARM_SVE) + ===== =========================================== + +Finalizes the configuration of the specified vcpu feature. + +The vcpu must already have been initialised, enabling the affected feature, by +means of a successful KVM_ARM_VCPU_INIT call with the appropriate flag set in +features[]. + +For affected vcpu features, this is a mandatory step that must be performed +before the vcpu is fully usable. + +Between KVM_ARM_VCPU_INIT and KVM_ARM_VCPU_FINALIZE, the feature may be +configured by use of ioctls such as KVM_SET_ONE_REG. The exact configuration +that should be performaned and how to do it are feature-dependent. + +Other calls that depend on a particular feature being finalized, such as +KVM_RUN, KVM_GET_REG_LIST, KVM_GET_ONE_REG and KVM_SET_ONE_REG, will fail with +-EPERM unless the feature has already been finalized by means of a +KVM_ARM_VCPU_FINALIZE call. + +See KVM_ARM_VCPU_INIT for details of vcpu features that require finalization +using this ioctl. + +4.120 KVM_SET_PMU_EVENT_FILTER +------------------------------ + +:Capability: KVM_CAP_PMU_EVENT_FILTER +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_pmu_event_filter (in) +:Returns: 0 on success, -1 on error + +Errors: + + ====== ============================================================ + EFAULT args[0] cannot be accessed + EINVAL args[0] contains invalid data in the filter or filter events + E2BIG nevents is too large + EBUSY not enough memory to allocate the filter + ====== ============================================================ + +:: + + struct kvm_pmu_event_filter { + __u32 action; + __u32 nevents; + __u32 fixed_counter_bitmap; + __u32 flags; + __u32 pad[4]; + __u64 events[0]; + }; + +This ioctl restricts the set of PMU events the guest can program by limiting +which event select and unit mask combinations are permitted. + +The argument holds a list of filter events which will be allowed or denied. + +Filter events only control general purpose counters; fixed purpose counters +are controlled by the fixed_counter_bitmap. + +Valid values for 'flags':: + +``0`` + +To use this mode, clear the 'flags' field. + +In this mode each event will contain an event select + unit mask. + +When the guest attempts to program the PMU the guest's event select + +unit mask is compared against the filter events to determine whether the +guest should have access. + +``KVM_PMU_EVENT_FLAG_MASKED_EVENTS`` +:Capability: KVM_CAP_PMU_EVENT_MASKED_EVENTS + +In this mode each filter event will contain an event select, mask, match, and +exclude value. To encode a masked event use:: + + KVM_PMU_ENCODE_MASKED_ENTRY() + +An encoded event will follow this layout:: + + Bits Description + ---- ----------- + 7:0 event select (low bits) + 15:8 umask match + 31:16 unused + 35:32 event select (high bits) + 36:54 unused + 55 exclude bit + 63:56 umask mask + +When the guest attempts to program the PMU, these steps are followed in +determining if the guest should have access: + + 1. Match the event select from the guest against the filter events. + 2. If a match is found, match the guest's unit mask to the mask and match + values of the included filter events. + I.e. (unit mask & mask) == match && !exclude. + 3. If a match is found, match the guest's unit mask to the mask and match + values of the excluded filter events. + I.e. (unit mask & mask) == match && exclude. + 4. + a. If an included match is found and an excluded match is not found, filter + the event. + b. For everything else, do not filter the event. + 5. + a. If the event is filtered and it's an allow list, allow the guest to + program the event. + b. If the event is filtered and it's a deny list, do not allow the guest to + program the event. + +When setting a new pmu event filter, -EINVAL will be returned if any of the +unused fields are set or if any of the high bits (35:32) in the event +select are set when called on Intel. + +Valid values for 'action':: + + #define KVM_PMU_EVENT_ALLOW 0 + #define KVM_PMU_EVENT_DENY 1 + +4.121 KVM_PPC_SVM_OFF +--------------------- + +:Capability: basic +:Architectures: powerpc +:Type: vm ioctl +:Parameters: none +:Returns: 0 on successful completion, + +Errors: + + ====== ================================================================ + EINVAL if ultravisor failed to terminate the secure guest + ENOMEM if hypervisor failed to allocate new radix page tables for guest + ====== ================================================================ + +This ioctl is used to turn off the secure mode of the guest or transition +the guest from secure mode to normal mode. This is invoked when the guest +is reset. This has no effect if called for a normal guest. + +This ioctl issues an ultravisor call to terminate the secure guest, +unpins the VPA pages and releases all the device pages that are used to +track the secure pages by hypervisor. + +4.122 KVM_S390_NORMAL_RESET +--------------------------- + +:Capability: KVM_CAP_S390_VCPU_RESETS +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 + +This ioctl resets VCPU registers and control structures according to +the cpu reset definition in the POP (Principles Of Operation). + +4.123 KVM_S390_INITIAL_RESET +---------------------------- + +:Capability: none +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 + +This ioctl resets VCPU registers and control structures according to +the initial cpu reset definition in the POP. However, the cpu is not +put into ESA mode. This reset is a superset of the normal reset. + +4.124 KVM_S390_CLEAR_RESET +-------------------------- + +:Capability: KVM_CAP_S390_VCPU_RESETS +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 + +This ioctl resets VCPU registers and control structures according to +the clear cpu reset definition in the POP. However, the cpu is not put +into ESA mode. This reset is a superset of the initial reset. + + +4.125 KVM_S390_PV_COMMAND +------------------------- + +:Capability: KVM_CAP_S390_PROTECTED +:Architectures: s390 +:Type: vm ioctl +:Parameters: struct kvm_pv_cmd +:Returns: 0 on success, < 0 on error + +:: + + struct kvm_pv_cmd { + __u32 cmd; /* Command to be executed */ + __u16 rc; /* Ultravisor return code */ + __u16 rrc; /* Ultravisor return reason code */ + __u64 data; /* Data or address */ + __u32 flags; /* flags for future extensions. Must be 0 for now */ + __u32 reserved[3]; + }; + +**Ultravisor return codes** +The Ultravisor return (reason) codes are provided by the kernel if a +Ultravisor call has been executed to achieve the results expected by +the command. Therefore they are independent of the IOCTL return +code. If KVM changes `rc`, its value will always be greater than 0 +hence setting it to 0 before issuing a PV command is advised to be +able to detect a change of `rc`. + +**cmd values:** + +KVM_PV_ENABLE + Allocate memory and register the VM with the Ultravisor, thereby + donating memory to the Ultravisor that will become inaccessible to + KVM. All existing CPUs are converted to protected ones. After this + command has succeeded, any CPU added via hotplug will become + protected during its creation as well. + + Errors: + + ===== ============================= + EINTR an unmasked signal is pending + ===== ============================= + +KVM_PV_DISABLE + Deregister the VM from the Ultravisor and reclaim the memory that had + been donated to the Ultravisor, making it usable by the kernel again. + All registered VCPUs are converted back to non-protected ones. If a + previous protected VM had been prepared for asynchronous teardown with + KVM_PV_ASYNC_CLEANUP_PREPARE and not subsequently torn down with + KVM_PV_ASYNC_CLEANUP_PERFORM, it will be torn down in this call + together with the current protected VM. + +KVM_PV_VM_SET_SEC_PARMS + Pass the image header from VM memory to the Ultravisor in + preparation of image unpacking and verification. + +KVM_PV_VM_UNPACK + Unpack (protect and decrypt) a page of the encrypted boot image. + +KVM_PV_VM_VERIFY + Verify the integrity of the unpacked image. Only if this succeeds, + KVM is allowed to start protected VCPUs. + +KVM_PV_INFO + :Capability: KVM_CAP_S390_PROTECTED_DUMP + + Presents an API that provides Ultravisor related data to userspace + via subcommands. len_max is the size of the user space buffer, + len_written is KVM's indication of how much bytes of that buffer + were actually written to. len_written can be used to determine the + valid fields if more response fields are added in the future. + + :: + + enum pv_cmd_info_id { + KVM_PV_INFO_VM, + KVM_PV_INFO_DUMP, + }; + + struct kvm_s390_pv_info_header { + __u32 id; + __u32 len_max; + __u32 len_written; + __u32 reserved; + }; + + struct kvm_s390_pv_info { + struct kvm_s390_pv_info_header header; + struct kvm_s390_pv_info_dump dump; + struct kvm_s390_pv_info_vm vm; + }; + +**subcommands:** + + KVM_PV_INFO_VM + This subcommand provides basic Ultravisor information for PV + hosts. These values are likely also exported as files in the sysfs + firmware UV query interface but they are more easily available to + programs in this API. + + The installed calls and feature_indication members provide the + installed UV calls and the UV's other feature indications. + + The max_* members provide information about the maximum number of PV + vcpus, PV guests and PV guest memory size. + + :: + + struct kvm_s390_pv_info_vm { + __u64 inst_calls_list[4]; + __u64 max_cpus; + __u64 max_guests; + __u64 max_guest_addr; + __u64 feature_indication; + }; + + + KVM_PV_INFO_DUMP + This subcommand provides information related to dumping PV guests. + + :: + + struct kvm_s390_pv_info_dump { + __u64 dump_cpu_buffer_len; + __u64 dump_config_mem_buffer_per_1m; + __u64 dump_config_finalize_len; + }; + +KVM_PV_DUMP + :Capability: KVM_CAP_S390_PROTECTED_DUMP + + Presents an API that provides calls which facilitate dumping a + protected VM. + + :: + + struct kvm_s390_pv_dmp { + __u64 subcmd; + __u64 buff_addr; + __u64 buff_len; + __u64 gaddr; /* For dump storage state */ + }; + + **subcommands:** + + KVM_PV_DUMP_INIT + Initializes the dump process of a protected VM. If this call does + not succeed all other subcommands will fail with -EINVAL. This + subcommand will return -EINVAL if a dump process has not yet been + completed. + + Not all PV vms can be dumped, the owner needs to set `dump + allowed` PCF bit 34 in the SE header to allow dumping. + + KVM_PV_DUMP_CONFIG_STOR_STATE + Stores `buff_len` bytes of tweak component values starting with + the 1MB block specified by the absolute guest address + (`gaddr`). `buff_len` needs to be `conf_dump_storage_state_len` + aligned and at least >= the `conf_dump_storage_state_len` value + provided by the dump uv_info data. buff_user might be written to + even if an error rc is returned. For instance if we encounter a + fault after writing the first page of data. + + KVM_PV_DUMP_COMPLETE + If the subcommand succeeds it completes the dump process and lets + KVM_PV_DUMP_INIT be called again. + + On success `conf_dump_finalize_len` bytes of completion data will be + stored to the `buff_addr`. The completion data contains a key + derivation seed, IV, tweak nonce and encryption keys as well as an + authentication tag all of which are needed to decrypt the dump at a + later time. + +KVM_PV_ASYNC_CLEANUP_PREPARE + :Capability: KVM_CAP_S390_PROTECTED_ASYNC_DISABLE + + Prepare the current protected VM for asynchronous teardown. Most + resources used by the current protected VM will be set aside for a + subsequent asynchronous teardown. The current protected VM will then + resume execution immediately as non-protected. There can be at most + one protected VM prepared for asynchronous teardown at any time. If + a protected VM had already been prepared for teardown without + subsequently calling KVM_PV_ASYNC_CLEANUP_PERFORM, this call will + fail. In that case, the userspace process should issue a normal + KVM_PV_DISABLE. The resources set aside with this call will need to + be cleaned up with a subsequent call to KVM_PV_ASYNC_CLEANUP_PERFORM + or KVM_PV_DISABLE, otherwise they will be cleaned up when KVM + terminates. KVM_PV_ASYNC_CLEANUP_PREPARE can be called again as soon + as cleanup starts, i.e. before KVM_PV_ASYNC_CLEANUP_PERFORM finishes. + +KVM_PV_ASYNC_CLEANUP_PERFORM + :Capability: KVM_CAP_S390_PROTECTED_ASYNC_DISABLE + + Tear down the protected VM previously prepared for teardown with + KVM_PV_ASYNC_CLEANUP_PREPARE. The resources that had been set aside + will be freed during the execution of this command. This PV command + should ideally be issued by userspace from a separate thread. If a + fatal signal is received (or the process terminates naturally), the + command will terminate immediately without completing, and the normal + KVM shutdown procedure will take care of cleaning up all remaining + protected VMs, including the ones whose teardown was interrupted by + process termination. + +4.126 KVM_XEN_HVM_SET_ATTR +-------------------------- + +:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_xen_hvm_attr +:Returns: 0 on success, < 0 on error + +:: + + struct kvm_xen_hvm_attr { + __u16 type; + __u16 pad[3]; + union { + __u8 long_mode; + __u8 vector; + __u8 runstate_update_flag; + struct { + __u64 gfn; + } shared_info; + struct { + __u32 send_port; + __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ + __u32 flags; + union { + struct { + __u32 port; + __u32 vcpu; + __u32 priority; + } port; + struct { + __u32 port; /* Zero for eventfd */ + __s32 fd; + } eventfd; + __u32 padding[4]; + } deliver; + } evtchn; + __u32 xen_version; + __u64 pad[8]; + } u; + }; + +type values: + +KVM_XEN_ATTR_TYPE_LONG_MODE + Sets the ABI mode of the VM to 32-bit or 64-bit (long mode). This + determines the layout of the shared info pages exposed to the VM. + +KVM_XEN_ATTR_TYPE_SHARED_INFO + Sets the guest physical frame number at which the Xen "shared info" + page resides. Note that although Xen places vcpu_info for the first + 32 vCPUs in the shared_info page, KVM does not automatically do so + and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO be used + explicitly even when the vcpu_info for a given vCPU resides at the + "default" location in the shared_info page. This is because KVM may + not be aware of the Xen CPU id which is used as the index into the + vcpu_info[] array, so may know the correct default location. + + Note that the shared info page may be constantly written to by KVM; + it contains the event channel bitmap used to deliver interrupts to + a Xen guest, amongst other things. It is exempt from dirty tracking + mechanisms — KVM will not explicitly mark the page as dirty each + time an event channel interrupt is delivered to the guest! Thus, + userspace should always assume that the designated GFN is dirty if + any vCPU has been running or any event channel interrupts can be + routed to the guest. + + Setting the gfn to KVM_XEN_INVALID_GFN will disable the shared info + page. + +KVM_XEN_ATTR_TYPE_UPCALL_VECTOR + Sets the exception vector used to deliver Xen event channel upcalls. + This is the HVM-wide vector injected directly by the hypervisor + (not through the local APIC), typically configured by a guest via + HVM_PARAM_CALLBACK_IRQ. This can be disabled again (e.g. for guest + SHUTDOWN_soft_reset) by setting it to zero. + +KVM_XEN_ATTR_TYPE_EVTCHN + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures + an outbound port number for interception of EVTCHNOP_send requests + from the guest. A given sending port number may be directed back to + a specified vCPU (by APIC ID) / port / priority on the guest, or to + trigger events on an eventfd. The vCPU and priority can be changed + by setting KVM_XEN_EVTCHN_UPDATE in a subsequent call, but but other + fields cannot change for a given sending port. A port mapping is + removed by using KVM_XEN_EVTCHN_DEASSIGN in the flags field. Passing + KVM_XEN_EVTCHN_RESET in the flags field removes all interception of + outbound event channels. The values of the flags field are mutually + exclusive and cannot be combined as a bitmask. + +KVM_XEN_ATTR_TYPE_XEN_VERSION + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures + the 32-bit version code returned to the guest when it invokes the + XENVER_version call; typically (XEN_MAJOR << 16 | XEN_MINOR). PV + Xen guests will often use this to as a dummy hypercall to trigger + event channel delivery, so responding within the kernel without + exiting to userspace is beneficial. + +KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG. It enables the + XEN_RUNSTATE_UPDATE flag which allows guest vCPUs to safely read + other vCPUs' vcpu_runstate_info. Xen guests enable this feature via + the VMASST_TYPE_runstate_update_flag of the HYPERVISOR_vm_assist + hypercall. + +4.127 KVM_XEN_HVM_GET_ATTR +-------------------------- + +:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_xen_hvm_attr +:Returns: 0 on success, < 0 on error + +Allows Xen VM attributes to be read. For the structure and types, +see KVM_XEN_HVM_SET_ATTR above. The KVM_XEN_ATTR_TYPE_EVTCHN +attribute cannot be read. + +4.128 KVM_XEN_VCPU_SET_ATTR +--------------------------- + +:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xen_vcpu_attr +:Returns: 0 on success, < 0 on error + +:: + + struct kvm_xen_vcpu_attr { + __u16 type; + __u16 pad[3]; + union { + __u64 gpa; + __u64 pad[4]; + struct { + __u64 state; + __u64 state_entry_time; + __u64 time_running; + __u64 time_runnable; + __u64 time_blocked; + __u64 time_offline; + } runstate; + __u32 vcpu_id; + struct { + __u32 port; + __u32 priority; + __u64 expires_ns; + } timer; + __u8 vector; + } u; + }; + +type values: + +KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO + Sets the guest physical address of the vcpu_info for a given vCPU. + As with the shared_info page for the VM, the corresponding page may be + dirtied at any time if event channel interrupt delivery is enabled, so + userspace should always assume that the page is dirty without relying + on dirty logging. Setting the gpa to KVM_XEN_INVALID_GPA will disable + the vcpu_info. + +KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO + Sets the guest physical address of an additional pvclock structure + for a given vCPU. This is typically used for guest vsyscall support. + Setting the gpa to KVM_XEN_INVALID_GPA will disable the structure. + +KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR + Sets the guest physical address of the vcpu_runstate_info for a given + vCPU. This is how a Xen guest tracks CPU state such as steal time. + Setting the gpa to KVM_XEN_INVALID_GPA will disable the runstate area. + +KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT + Sets the runstate (RUNSTATE_running/_runnable/_blocked/_offline) of + the given vCPU from the .u.runstate.state member of the structure. + KVM automatically accounts running and runnable time but blocked + and offline states are only entered explicitly. + +KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA + Sets all fields of the vCPU runstate data from the .u.runstate member + of the structure, including the current runstate. The state_entry_time + must equal the sum of the other four times. + +KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST + This *adds* the contents of the .u.runstate members of the structure + to the corresponding members of the given vCPU's runstate data, thus + permitting atomic adjustments to the runstate times. The adjustment + to the state_entry_time must equal the sum of the adjustments to the + other four times. The state field must be set to -1, or to a valid + runstate value (RUNSTATE_running, RUNSTATE_runnable, RUNSTATE_blocked + or RUNSTATE_offline) to set the current accounted state as of the + adjusted state_entry_time. + +KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the Xen + vCPU ID of the given vCPU, to allow timer-related VCPU operations to + be intercepted by KVM. + +KVM_XEN_VCPU_ATTR_TYPE_TIMER + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the + event channel port/priority for the VIRQ_TIMER of the vCPU, as well + as allowing a pending timer to be saved/restored. Setting the timer + port to zero disables kernel handling of the singleshot timer. + +KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR + This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates + support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the + per-vCPU local APIC upcall vector, configured by a Xen guest with + the HVMOP_set_evtchn_upcall_vector hypercall. This is typically + used by Windows guests, and is distinct from the HVM-wide upcall + vector configured with HVM_PARAM_CALLBACK_IRQ. It is disabled by + setting the vector to zero. + + +4.129 KVM_XEN_VCPU_GET_ATTR +--------------------------- + +:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xen_vcpu_attr +:Returns: 0 on success, < 0 on error + +Allows Xen vCPU attributes to be read. For the structure and types, +see KVM_XEN_VCPU_SET_ATTR above. + +The KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST type may not be used +with the KVM_XEN_VCPU_GET_ATTR ioctl. + +4.130 KVM_ARM_MTE_COPY_TAGS +--------------------------- + +:Capability: KVM_CAP_ARM_MTE +:Architectures: arm64 +:Type: vm ioctl +:Parameters: struct kvm_arm_copy_mte_tags +:Returns: number of bytes copied, < 0 on error (-EINVAL for incorrect + arguments, -EFAULT if memory cannot be accessed). + +:: + + struct kvm_arm_copy_mte_tags { + __u64 guest_ipa; + __u64 length; + void __user *addr; + __u64 flags; + __u64 reserved[2]; + }; + +Copies Memory Tagging Extension (MTE) tags to/from guest tag memory. The +``guest_ipa`` and ``length`` fields must be ``PAGE_SIZE`` aligned. +``length`` must not be bigger than 2^31 - PAGE_SIZE bytes. The ``addr`` +field must point to a buffer which the tags will be copied to or from. + +``flags`` specifies the direction of copy, either ``KVM_ARM_TAGS_TO_GUEST`` or +``KVM_ARM_TAGS_FROM_GUEST``. + +The size of the buffer to store the tags is ``(length / 16)`` bytes +(granules in MTE are 16 bytes long). Each byte contains a single tag +value. This matches the format of ``PTRACE_PEEKMTETAGS`` and +``PTRACE_POKEMTETAGS``. + +If an error occurs before any data is copied then a negative error code is +returned. If some tags have been copied before an error occurs then the number +of bytes successfully copied is returned. If the call completes successfully +then ``length`` is returned. + +4.131 KVM_GET_SREGS2 +-------------------- + +:Capability: KVM_CAP_SREGS2 +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_sregs2 (out) +:Returns: 0 on success, -1 on error + +Reads special registers from the vcpu. +This ioctl (when supported) replaces the KVM_GET_SREGS. + +:: + + struct kvm_sregs2 { + /* out (KVM_GET_SREGS2) / in (KVM_SET_SREGS2) */ + struct kvm_segment cs, ds, es, fs, gs, ss; + struct kvm_segment tr, ldt; + struct kvm_dtable gdt, idt; + __u64 cr0, cr2, cr3, cr4, cr8; + __u64 efer; + __u64 apic_base; + __u64 flags; + __u64 pdptrs[4]; + }; + +flags values for ``kvm_sregs2``: + +``KVM_SREGS2_FLAGS_PDPTRS_VALID`` + + Indicates that the struct contains valid PDPTR values. + + +4.132 KVM_SET_SREGS2 +-------------------- + +:Capability: KVM_CAP_SREGS2 +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_sregs2 (in) +:Returns: 0 on success, -1 on error + +Writes special registers into the vcpu. +See KVM_GET_SREGS2 for the data structures. +This ioctl (when supported) replaces the KVM_SET_SREGS. + +4.133 KVM_GET_STATS_FD +---------------------- + +:Capability: KVM_CAP_STATS_BINARY_FD +:Architectures: all +:Type: vm ioctl, vcpu ioctl +:Parameters: none +:Returns: statistics file descriptor on success, < 0 on error + +Errors: + + ====== ====================================================== + ENOMEM if the fd could not be created due to lack of memory + EMFILE if the number of opened files exceeds the limit + ====== ====================================================== + +The returned file descriptor can be used to read VM/vCPU statistics data in +binary format. The data in the file descriptor consists of four blocks +organized as follows: + ++-------------+ +| Header | ++-------------+ +| id string | ++-------------+ +| Descriptors | ++-------------+ +| Stats Data | ++-------------+ + +Apart from the header starting at offset 0, please be aware that it is +not guaranteed that the four blocks are adjacent or in the above order; +the offsets of the id, descriptors and data blocks are found in the +header. However, all four blocks are aligned to 64 bit offsets in the +file and they do not overlap. + +All blocks except the data block are immutable. Userspace can read them +only one time after retrieving the file descriptor, and then use ``pread`` or +``lseek`` to read the statistics repeatedly. + +All data is in system endianness. + +The format of the header is as follows:: + + struct kvm_stats_header { + __u32 flags; + __u32 name_size; + __u32 num_desc; + __u32 id_offset; + __u32 desc_offset; + __u32 data_offset; + }; + +The ``flags`` field is not used at the moment. It is always read as 0. + +The ``name_size`` field is the size (in byte) of the statistics name string +(including trailing '\0') which is contained in the "id string" block and +appended at the end of every descriptor. + +The ``num_desc`` field is the number of descriptors that are included in the +descriptor block. (The actual number of values in the data block may be +larger, since each descriptor may comprise more than one value). + +The ``id_offset`` field is the offset of the id string from the start of the +file indicated by the file descriptor. It is a multiple of 8. + +The ``desc_offset`` field is the offset of the Descriptors block from the start +of the file indicated by the file descriptor. It is a multiple of 8. + +The ``data_offset`` field is the offset of the Stats Data block from the start +of the file indicated by the file descriptor. It is a multiple of 8. + +The id string block contains a string which identifies the file descriptor on +which KVM_GET_STATS_FD was invoked. The size of the block, including the +trailing ``'\0'``, is indicated by the ``name_size`` field in the header. + +The descriptors block is only needed to be read once for the lifetime of the +file descriptor contains a sequence of ``struct kvm_stats_desc``, each followed +by a string of size ``name_size``. +:: + + #define KVM_STATS_TYPE_SHIFT 0 + #define KVM_STATS_TYPE_MASK (0xF << KVM_STATS_TYPE_SHIFT) + #define KVM_STATS_TYPE_CUMULATIVE (0x0 << KVM_STATS_TYPE_SHIFT) + #define KVM_STATS_TYPE_INSTANT (0x1 << KVM_STATS_TYPE_SHIFT) + #define KVM_STATS_TYPE_PEAK (0x2 << KVM_STATS_TYPE_SHIFT) + #define KVM_STATS_TYPE_LINEAR_HIST (0x3 << KVM_STATS_TYPE_SHIFT) + #define KVM_STATS_TYPE_LOG_HIST (0x4 << KVM_STATS_TYPE_SHIFT) + #define KVM_STATS_TYPE_MAX KVM_STATS_TYPE_LOG_HIST + + #define KVM_STATS_UNIT_SHIFT 4 + #define KVM_STATS_UNIT_MASK (0xF << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_NONE (0x0 << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) + #define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN + + #define KVM_STATS_BASE_SHIFT 8 + #define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) + #define KVM_STATS_BASE_POW10 (0x0 << KVM_STATS_BASE_SHIFT) + #define KVM_STATS_BASE_POW2 (0x1 << KVM_STATS_BASE_SHIFT) + #define KVM_STATS_BASE_MAX KVM_STATS_BASE_POW2 + + struct kvm_stats_desc { + __u32 flags; + __s16 exponent; + __u16 size; + __u32 offset; + __u32 bucket_size; + char name[]; + }; + +The ``flags`` field contains the type and unit of the statistics data described +by this descriptor. Its endianness is CPU native. +The following flags are supported: + +Bits 0-3 of ``flags`` encode the type: + + * ``KVM_STATS_TYPE_CUMULATIVE`` + The statistics reports a cumulative count. The value of data can only be increased. + Most of the counters used in KVM are of this type. + The corresponding ``size`` field for this type is always 1. + All cumulative statistics data are read/write. + * ``KVM_STATS_TYPE_INSTANT`` + The statistics reports an instantaneous value. Its value can be increased or + decreased. This type is usually used as a measurement of some resources, + like the number of dirty pages, the number of large pages, etc. + All instant statistics are read only. + The corresponding ``size`` field for this type is always 1. + * ``KVM_STATS_TYPE_PEAK`` + The statistics data reports a peak value, for example the maximum number + of items in a hash table bucket, the longest time waited and so on. + The value of data can only be increased. + The corresponding ``size`` field for this type is always 1. + * ``KVM_STATS_TYPE_LINEAR_HIST`` + The statistic is reported as a linear histogram. The number of + buckets is specified by the ``size`` field. The size of buckets is specified + by the ``hist_param`` field. The range of the Nth bucket (1 <= N < ``size``) + is [``hist_param``*(N-1), ``hist_param``*N), while the range of the last + bucket is [``hist_param``*(``size``-1), +INF). (+INF means positive infinity + value.) + * ``KVM_STATS_TYPE_LOG_HIST`` + The statistic is reported as a logarithmic histogram. The number of + buckets is specified by the ``size`` field. The range of the first bucket is + [0, 1), while the range of the last bucket is [pow(2, ``size``-2), +INF). + Otherwise, The Nth bucket (1 < N < ``size``) covers + [pow(2, N-2), pow(2, N-1)). + +Bits 4-7 of ``flags`` encode the unit: + + * ``KVM_STATS_UNIT_NONE`` + There is no unit for the value of statistics data. This usually means that + the value is a simple counter of an event. + * ``KVM_STATS_UNIT_BYTES`` + It indicates that the statistics data is used to measure memory size, in the + unit of Byte, KiByte, MiByte, GiByte, etc. The unit of the data is + determined by the ``exponent`` field in the descriptor. + * ``KVM_STATS_UNIT_SECONDS`` + It indicates that the statistics data is used to measure time or latency. + * ``KVM_STATS_UNIT_CYCLES`` + It indicates that the statistics data is used to measure CPU clock cycles. + * ``KVM_STATS_UNIT_BOOLEAN`` + It indicates that the statistic will always be either 0 or 1. Boolean + statistics of "peak" type will never go back from 1 to 0. Boolean + statistics can be linear histograms (with two buckets) but not logarithmic + histograms. + +Note that, in the case of histograms, the unit applies to the bucket +ranges, while the bucket value indicates how many samples fell in the +bucket's range. + +Bits 8-11 of ``flags``, together with ``exponent``, encode the scale of the +unit: + + * ``KVM_STATS_BASE_POW10`` + The scale is based on power of 10. It is used for measurement of time and + CPU clock cycles. For example, an exponent of -9 can be used with + ``KVM_STATS_UNIT_SECONDS`` to express that the unit is nanoseconds. + * ``KVM_STATS_BASE_POW2`` + The scale is based on power of 2. It is used for measurement of memory size. + For example, an exponent of 20 can be used with ``KVM_STATS_UNIT_BYTES`` to + express that the unit is MiB. + +The ``size`` field is the number of values of this statistics data. Its +value is usually 1 for most of simple statistics. 1 means it contains an +unsigned 64bit data. + +The ``offset`` field is the offset from the start of Data Block to the start of +the corresponding statistics data. + +The ``bucket_size`` field is used as a parameter for histogram statistics data. +It is only used by linear histogram statistics data, specifying the size of a +bucket in the unit expressed by bits 4-11 of ``flags`` together with ``exponent``. + +The ``name`` field is the name string of the statistics data. The name string +starts at the end of ``struct kvm_stats_desc``. The maximum length including +the trailing ``'\0'``, is indicated by ``name_size`` in the header. + +The Stats Data block contains an array of 64-bit values in the same order +as the descriptors in Descriptors block. + +4.134 KVM_GET_XSAVE2 +-------------------- + +:Capability: KVM_CAP_XSAVE2 +:Architectures: x86 +:Type: vcpu ioctl +:Parameters: struct kvm_xsave (out) +:Returns: 0 on success, -1 on error + + +:: + + struct kvm_xsave { + __u32 region[1024]; + __u32 extra[0]; + }; + +This ioctl would copy current vcpu's xsave struct to the userspace. It +copies as many bytes as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) +when invoked on the vm file descriptor. The size value returned by +KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) will always be at least 4096. +Currently, it is only greater than 4096 if a dynamic feature has been +enabled with ``arch_prctl()``, but this may change in the future. + +The offsets of the state save areas in struct kvm_xsave follow the contents +of CPUID leaf 0xD on the host. + +4.135 KVM_XEN_HVM_EVTCHN_SEND +----------------------------- + +:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND +:Architectures: x86 +:Type: vm ioctl +:Parameters: struct kvm_irq_routing_xen_evtchn +:Returns: 0 on success, < 0 on error + + +:: + + struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; + }; + +This ioctl injects an event channel interrupt directly to the guest vCPU. + +4.136 KVM_S390_PV_CPU_COMMAND +----------------------------- + +:Capability: KVM_CAP_S390_PROTECTED_DUMP +:Architectures: s390 +:Type: vcpu ioctl +:Parameters: none +:Returns: 0 on success, < 0 on error + +This ioctl closely mirrors `KVM_S390_PV_COMMAND` but handles requests +for vcpus. It re-uses the kvm_s390_pv_dmp struct and hence also shares +the command ids. + +**command:** + +KVM_PV_DUMP + Presents an API that provides calls which facilitate dumping a vcpu + of a protected VM. + +**subcommand:** + +KVM_PV_DUMP_CPU + Provides encrypted dump data like register values. + The length of the returned data is provided by uv_info.guest_cpu_stor_len. + +4.137 KVM_S390_ZPCI_OP +---------------------- + +:Capability: KVM_CAP_S390_ZPCI_OP +:Architectures: s390 +:Type: vm ioctl +:Parameters: struct kvm_s390_zpci_op (in) +:Returns: 0 on success, <0 on error + +Used to manage hardware-assisted virtualization features for zPCI devices. + +Parameters are specified via the following structure:: + + struct kvm_s390_zpci_op { + /* in */ + __u32 fh; /* target device */ + __u8 op; /* operation to perform */ + __u8 pad[3]; + union { + /* for KVM_S390_ZPCIOP_REG_AEN */ + struct { + __u64 ibv; /* Guest addr of interrupt bit vector */ + __u64 sb; /* Guest addr of summary bit */ + __u32 flags; + __u32 noi; /* Number of interrupts */ + __u8 isc; /* Guest interrupt subclass */ + __u8 sbo; /* Offset of guest summary bit vector */ + __u16 pad; + } reg_aen; + __u64 reserved[8]; + } u; + }; + +The type of operation is specified in the "op" field. +KVM_S390_ZPCIOP_REG_AEN is used to register the VM for adapter event +notification interpretation, which will allow firmware delivery of adapter +events directly to the vm, with KVM providing a backup delivery mechanism; +KVM_S390_ZPCIOP_DEREG_AEN is used to subsequently disable interpretation of +adapter event notifications. + +The target zPCI function must also be specified via the "fh" field. For the +KVM_S390_ZPCIOP_REG_AEN operation, additional information to establish firmware +delivery must be provided via the "reg_aen" struct. + +The "pad" and "reserved" fields may be used for future extensions and should be +set to 0s by userspace. + +4.138 KVM_ARM_SET_COUNTER_OFFSET +-------------------------------- + +:Capability: KVM_CAP_COUNTER_OFFSET +:Architectures: arm64 +:Type: vm ioctl +:Parameters: struct kvm_arm_counter_offset (in) +:Returns: 0 on success, < 0 on error + +This capability indicates that userspace is able to apply a single VM-wide +offset to both the virtual and physical counters as viewed by the guest +using the KVM_ARM_SET_CNT_OFFSET ioctl and the following data structure: + +:: + + struct kvm_arm_counter_offset { + __u64 counter_offset; + __u64 reserved; + }; + +The offset describes a number of counter cycles that are subtracted from +both virtual and physical counter views (similar to the effects of the +CNTVOFF_EL2 and CNTPOFF_EL2 system registers, but only global). The offset +always applies to all vcpus (already created or created after this ioctl) +for this VM. + +It is userspace's responsibility to compute the offset based, for example, +on previous values of the guest counters. + +Any value other than 0 for the "reserved" field may result in an error +(-EINVAL) being returned. This ioctl can also return -EBUSY if any vcpu +ioctl is issued concurrently. + +Note that using this ioctl results in KVM ignoring subsequent userspace +writes to the CNTVCT_EL0 and CNTPCT_EL0 registers using the SET_ONE_REG +interface. No error will be returned, but the resulting offset will not be +applied. + +5. The kvm_run structure +======================== + +Application code obtains a pointer to the kvm_run structure by +mmap()ing a vcpu fd. From that point, application code can control +execution by changing fields in kvm_run prior to calling the KVM_RUN +ioctl, and obtain information about the reason KVM_RUN returned by +looking up structure members. + +:: + + struct kvm_run { + /* in */ + __u8 request_interrupt_window; + +Request that KVM_RUN return when it becomes possible to inject external +interrupts into the guest. Useful in conjunction with KVM_INTERRUPT. + +:: + + __u8 immediate_exit; + +This field is polled once when KVM_RUN starts; if non-zero, KVM_RUN +exits immediately, returning -EINTR. In the common scenario where a +signal is used to "kick" a VCPU out of KVM_RUN, this field can be used +to avoid usage of KVM_SET_SIGNAL_MASK, which has worse scalability. +Rather than blocking the signal outside KVM_RUN, userspace can set up +a signal handler that sets run->immediate_exit to a non-zero value. + +This field is ignored if KVM_CAP_IMMEDIATE_EXIT is not available. + +:: + + __u8 padding1[6]; + + /* out */ + __u32 exit_reason; + +When KVM_RUN has returned successfully (return value 0), this informs +application code why KVM_RUN has returned. Allowable values for this +field are detailed below. + +:: + + __u8 ready_for_interrupt_injection; + +If request_interrupt_window has been specified, this field indicates +an interrupt can be injected now with KVM_INTERRUPT. + +:: + + __u8 if_flag; + +The value of the current interrupt flag. Only valid if in-kernel +local APIC is not used. + +:: + + __u16 flags; + +More architecture-specific flags detailing state of the VCPU that may +affect the device's behavior. Current defined flags:: + + /* x86, set if the VCPU is in system management mode */ + #define KVM_RUN_X86_SMM (1 << 0) + /* x86, set if bus lock detected in VM */ + #define KVM_RUN_BUS_LOCK (1 << 1) + /* arm64, set for KVM_EXIT_DEBUG */ + #define KVM_DEBUG_ARCH_HSR_HIGH_VALID (1 << 0) + +:: + + /* in (pre_kvm_run), out (post_kvm_run) */ + __u64 cr8; + +The value of the cr8 register. Only valid if in-kernel local APIC is +not used. Both input and output. + +:: + + __u64 apic_base; + +The value of the APIC BASE msr. Only valid if in-kernel local +APIC is not used. Both input and output. + +:: + + union { + /* KVM_EXIT_UNKNOWN */ + struct { + __u64 hardware_exit_reason; + } hw; + +If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown +reasons. Further architecture-specific information is available in +hardware_exit_reason. + +:: + + /* KVM_EXIT_FAIL_ENTRY */ + struct { + __u64 hardware_entry_failure_reason; + __u32 cpu; /* if KVM_LAST_CPU */ + } fail_entry; + +If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due +to unknown reasons. Further architecture-specific information is +available in hardware_entry_failure_reason. + +:: + + /* KVM_EXIT_EXCEPTION */ + struct { + __u32 exception; + __u32 error_code; + } ex; + +Unused. + +:: + + /* KVM_EXIT_IO */ + struct { + #define KVM_EXIT_IO_IN 0 + #define KVM_EXIT_IO_OUT 1 + __u8 direction; + __u8 size; /* bytes */ + __u16 port; + __u32 count; + __u64 data_offset; /* relative to kvm_run start */ + } io; + +If exit_reason is KVM_EXIT_IO, then the vcpu has +executed a port I/O instruction which could not be satisfied by kvm. +data_offset describes where the data is located (KVM_EXIT_IO_OUT) or +where kvm expects application code to place the data for the next +KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array. + +:: + + /* KVM_EXIT_DEBUG */ + struct { + struct kvm_debug_exit_arch arch; + } debug; + +If the exit_reason is KVM_EXIT_DEBUG, then a vcpu is processing a debug event +for which architecture specific information is returned. + +:: + + /* KVM_EXIT_MMIO */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } mmio; + +If exit_reason is KVM_EXIT_MMIO, then the vcpu has +executed a memory-mapped I/O instruction which could not be satisfied +by kvm. The 'data' member contains the written data if 'is_write' is +true, and should be filled by application code otherwise. + +The 'data' member contains, in its first 'len' bytes, the value as it would +appear if the VCPU performed a load or store of the appropriate width directly +to the byte array. + +.. note:: + + For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN, + KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding + operations are complete (and guest state is consistent) only after userspace + has re-entered the kernel with KVM_RUN. The kernel side will first finish + incomplete operations and then check for pending signals. + + The pending state of the operation is not preserved in state which is + visible to userspace, thus userspace should ensure that the operation is + completed before performing a live migration. Userspace can re-enter the + guest with an unmasked signal pending or with the immediate_exit field set + to complete pending operations without allowing any further instructions + to be executed. + +:: + + /* KVM_EXIT_HYPERCALL */ + struct { + __u64 nr; + __u64 args[6]; + __u64 ret; + __u64 flags; + } hypercall; + + +It is strongly recommended that userspace use ``KVM_EXIT_IO`` (x86) or +``KVM_EXIT_MMIO`` (all except s390) to implement functionality that +requires a guest to interact with host userspace. + +.. note:: KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO. + +For arm64: +---------- + +SMCCC exits can be enabled depending on the configuration of the SMCCC +filter. See the Documentation/virt/kvm/devices/vm.rst +``KVM_ARM_SMCCC_FILTER`` for more details. + +``nr`` contains the function ID of the guest's SMCCC call. Userspace is +expected to use the ``KVM_GET_ONE_REG`` ioctl to retrieve the call +parameters from the vCPU's GPRs. + +Definition of ``flags``: + - ``KVM_HYPERCALL_EXIT_SMC``: Indicates that the guest used the SMC + conduit to initiate the SMCCC call. If this bit is 0 then the guest + used the HVC conduit for the SMCCC call. + + - ``KVM_HYPERCALL_EXIT_16BIT``: Indicates that the guest used a 16bit + instruction to initiate the SMCCC call. If this bit is 0 then the + guest used a 32bit instruction. An AArch64 guest always has this + bit set to 0. + +At the point of exit, PC points to the instruction immediately following +the trapping instruction. + +:: + + /* KVM_EXIT_TPR_ACCESS */ + struct { + __u64 rip; + __u32 is_write; + __u32 pad; + } tpr_access; + +To be documented (KVM_TPR_ACCESS_REPORTING). + +:: + + /* KVM_EXIT_S390_SIEIC */ + struct { + __u8 icptcode; + __u64 mask; /* psw upper half */ + __u64 addr; /* psw lower half */ + __u16 ipa; + __u32 ipb; + } s390_sieic; + +s390 specific. + +:: + + /* KVM_EXIT_S390_RESET */ + #define KVM_S390_RESET_POR 1 + #define KVM_S390_RESET_CLEAR 2 + #define KVM_S390_RESET_SUBSYSTEM 4 + #define KVM_S390_RESET_CPU_INIT 8 + #define KVM_S390_RESET_IPL 16 + __u64 s390_reset_flags; + +s390 specific. + +:: + + /* KVM_EXIT_S390_UCONTROL */ + struct { + __u64 trans_exc_code; + __u32 pgm_code; + } s390_ucontrol; + +s390 specific. A page fault has occurred for a user controlled virtual +machine (KVM_VM_S390_UNCONTROL) on its host page table that cannot be +resolved by the kernel. +The program code and the translation exception code that were placed +in the cpu's lowcore are presented here as defined by the z Architecture +Principles of Operation Book in the Chapter for Dynamic Address Translation +(DAT) + +:: + + /* KVM_EXIT_DCR */ + struct { + __u32 dcrn; + __u32 data; + __u8 is_write; + } dcr; + +Deprecated - was used for 440 KVM. + +:: + + /* KVM_EXIT_OSI */ + struct { + __u64 gprs[32]; + } osi; + +MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch +hypercalls and exit with this exit struct that contains all the guest gprs. + +If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall. +Userspace can now handle the hypercall and when it's done modify the gprs as +necessary. Upon guest entry all guest GPRs will then be replaced by the values +in this struct. + +:: + + /* KVM_EXIT_PAPR_HCALL */ + struct { + __u64 nr; + __u64 ret; + __u64 args[9]; + } papr_hcall; + +This is used on 64-bit PowerPC when emulating a pSeries partition, +e.g. with the 'pseries' machine type in qemu. It occurs when the +guest does a hypercall using the 'sc 1' instruction. The 'nr' field +contains the hypercall number (from the guest R3), and 'args' contains +the arguments (from the guest R4 - R12). Userspace should put the +return code in 'ret' and any extra returned values in args[]. +The possible hypercalls are defined in the Power Architecture Platform +Requirements (PAPR) document available from www.power.org (free +developer registration required to access it). + +:: + + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; + +s390 specific. This exit occurs when KVM_CAP_S390_CSS_SUPPORT has been enabled +and TEST SUBCHANNEL was intercepted. If dequeued is set, a pending I/O +interrupt for the target subchannel has been dequeued and subchannel_id, +subchannel_nr, io_int_parm and io_int_word contain the parameters for that +interrupt. ipb is needed for instruction parameter decoding. + +:: + + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; + +On FSL BookE PowerPC chips, the interrupt controller has a fast patch +interrupt acknowledge path to the core. When the core successfully +delivers an interrupt, it automatically populates the EPR register with +the interrupt vector number and acknowledges the interrupt inside +the interrupt controller. + +In case the interrupt controller lives in user space, we need to do +the interrupt acknowledge cycle through it to fetch the next to be +delivered interrupt vector using this exit. + +It gets triggered whenever both KVM_CAP_PPC_EPR are enabled and an +external interrupt has just been delivered into the guest. User space +should put the acknowledged interrupt vector into the 'epr' field. + +:: + + /* KVM_EXIT_SYSTEM_EVENT */ + struct { + #define KVM_SYSTEM_EVENT_SHUTDOWN 1 + #define KVM_SYSTEM_EVENT_RESET 2 + #define KVM_SYSTEM_EVENT_CRASH 3 + #define KVM_SYSTEM_EVENT_WAKEUP 4 + #define KVM_SYSTEM_EVENT_SUSPEND 5 + #define KVM_SYSTEM_EVENT_SEV_TERM 6 + __u32 type; + __u32 ndata; + __u64 data[16]; + } system_event; + +If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered +a system-level event using some architecture specific mechanism (hypercall +or some special instruction). In case of ARM64, this is triggered using +HVC instruction based PSCI call from the vcpu. + +The 'type' field describes the system-level event type. +Valid values for 'type' are: + + - KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the + VM. Userspace is not obliged to honour this, and if it does honour + this does not need to destroy the VM synchronously (ie it may call + KVM_RUN again before shutdown finally occurs). + - KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM. + As with SHUTDOWN, userspace can choose to ignore the request, or + to schedule the reset to occur in the future and may call KVM_RUN again. + - KVM_SYSTEM_EVENT_CRASH -- the guest crash occurred and the guest + has requested a crash condition maintenance. Userspace can choose + to ignore the request, or to gather VM memory core dump and/or + reset/shutdown of the VM. + - KVM_SYSTEM_EVENT_SEV_TERM -- an AMD SEV guest requested termination. + The guest physical address of the guest's GHCB is stored in `data[0]`. + - KVM_SYSTEM_EVENT_WAKEUP -- the exiting vCPU is in a suspended state and + KVM has recognized a wakeup event. Userspace may honor this event by + marking the exiting vCPU as runnable, or deny it and call KVM_RUN again. + - KVM_SYSTEM_EVENT_SUSPEND -- the guest has requested a suspension of + the VM. + +If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain +architecture specific information for the system-level event. Only +the first `ndata` items (possibly zero) of the data array are valid. + + - for arm64, data[0] is set to KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 if + the guest issued a SYSTEM_RESET2 call according to v1.1 of the PSCI + specification. + + - for RISC-V, data[0] is set to the value of the second argument of the + ``sbi_system_reset`` call. + +Previous versions of Linux defined a `flags` member in this struct. The +field is now aliased to `data[0]`. Userspace can assume that it is only +written if ndata is greater than 0. + +For arm/arm64: +-------------- + +KVM_SYSTEM_EVENT_SUSPEND exits are enabled with the +KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest invokes the PSCI +SYSTEM_SUSPEND function, KVM will exit to userspace with this event +type. + +It is the sole responsibility of userspace to implement the PSCI +SYSTEM_SUSPEND call according to ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND". +KVM does not change the vCPU's state before exiting to userspace, so +the call parameters are left in-place in the vCPU registers. + +Userspace is _required_ to take action for such an exit. It must +either: + + - Honor the guest request to suspend the VM. Userspace can request + in-kernel emulation of suspension by setting the calling vCPU's + state to KVM_MP_STATE_SUSPENDED. Userspace must configure the vCPU's + state according to the parameters passed to the PSCI function when + the calling vCPU is resumed. See ARM DEN0022D.b 5.19.1 "Intended use" + for details on the function parameters. + + - Deny the guest request to suspend the VM. See ARM DEN0022D.b 5.19.2 + "Caller responsibilities" for possible return values. + +:: + + /* KVM_EXIT_IOAPIC_EOI */ + struct { + __u8 vector; + } eoi; + +Indicates that the VCPU's in-kernel local APIC received an EOI for a +level-triggered IOAPIC interrupt. This exit only triggers when the +IOAPIC is implemented in userspace (i.e. KVM_CAP_SPLIT_IRQCHIP is enabled); +the userspace IOAPIC should process the EOI and retrigger the interrupt if +it is still asserted. Vector is the LAPIC interrupt vector for which the +EOI was received. + +:: + + struct kvm_hyperv_exit { + #define KVM_EXIT_HYPERV_SYNIC 1 + #define KVM_EXIT_HYPERV_HCALL 2 + #define KVM_EXIT_HYPERV_SYNDBG 3 + __u32 type; + __u32 pad1; + union { + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 evt_page; + __u64 msg_page; + } synic; + struct { + __u64 input; + __u64 result; + __u64 params[2]; + } hcall; + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 status; + __u64 send_page; + __u64 recv_page; + __u64 pending_page; + } syndbg; + } u; + }; + /* KVM_EXIT_HYPERV */ + struct kvm_hyperv_exit hyperv; + +Indicates that the VCPU exits into userspace to process some tasks +related to Hyper-V emulation. + +Valid values for 'type' are: + + - KVM_EXIT_HYPERV_SYNIC -- synchronously notify user-space about + +Hyper-V SynIC state change. Notification is used to remap SynIC +event/message pages and to enable/disable SynIC messages/events processing +in userspace. + + - KVM_EXIT_HYPERV_SYNDBG -- synchronously notify user-space about + +Hyper-V Synthetic debugger state change. Notification is used to either update +the pending_page location or to send a control command (send the buffer located +in send_page or recv a buffer to recv_page). + +:: + + /* KVM_EXIT_ARM_NISV */ + struct { + __u64 esr_iss; + __u64 fault_ipa; + } arm_nisv; + +Used on arm64 systems. If a guest accesses memory not in a memslot, +KVM will typically return to userspace and ask it to do MMIO emulation on its +behalf. However, for certain classes of instructions, no instruction decode +(direction, length of memory access) is provided, and fetching and decoding +the instruction from the VM is overly complicated to live in the kernel. + +Historically, when this situation occurred, KVM would print a warning and kill +the VM. KVM assumed that if the guest accessed non-memslot memory, it was +trying to do I/O, which just couldn't be emulated, and the warning message was +phrased accordingly. However, what happened more often was that a guest bug +caused access outside the guest memory areas which should lead to a more +meaningful warning message and an external abort in the guest, if the access +did not fall within an I/O window. + +Userspace implementations can query for KVM_CAP_ARM_NISV_TO_USER, and enable +this capability at VM creation. Once this is done, these types of errors will +instead return to userspace with KVM_EXIT_ARM_NISV, with the valid bits from +the ESR_EL2 in the esr_iss field, and the faulting IPA in the fault_ipa field. +Userspace can either fix up the access if it's actually an I/O access by +decoding the instruction from guest memory (if it's very brave) and continue +executing the guest, or it can decide to suspend, dump, or restart the guest. + +Note that KVM does not skip the faulting instruction as it does for +KVM_EXIT_MMIO, but userspace has to emulate any change to the processing state +if it decides to decode and emulate the instruction. + +:: + + /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ + struct { + __u8 error; /* user -> kernel */ + __u8 pad[7]; + __u32 reason; /* kernel -> user */ + __u32 index; /* kernel -> user */ + __u64 data; /* kernel <-> user */ + } msr; + +Used on x86 systems. When the VM capability KVM_CAP_X86_USER_SPACE_MSR is +enabled, MSR accesses to registers that would invoke a #GP by KVM kernel code +may instead trigger a KVM_EXIT_X86_RDMSR exit for reads and KVM_EXIT_X86_WRMSR +exit for writes. + +The "reason" field specifies why the MSR interception occurred. Userspace will +only receive MSR exits when a particular reason was requested during through +ENABLE_CAP. Currently valid exit reasons are: + +============================ ======================================== + KVM_MSR_EXIT_REASON_UNKNOWN access to MSR that is unknown to KVM + KVM_MSR_EXIT_REASON_INVAL access to invalid MSRs or reserved bits + KVM_MSR_EXIT_REASON_FILTER access blocked by KVM_X86_SET_MSR_FILTER +============================ ======================================== + +For KVM_EXIT_X86_RDMSR, the "index" field tells userspace which MSR the guest +wants to read. To respond to this request with a successful read, userspace +writes the respective data into the "data" field and must continue guest +execution to ensure the read data is transferred into guest register state. + +If the RDMSR request was unsuccessful, userspace indicates that with a "1" in +the "error" field. This will inject a #GP into the guest when the VCPU is +executed again. + +For KVM_EXIT_X86_WRMSR, the "index" field tells userspace which MSR the guest +wants to write. Once finished processing the event, userspace must continue +vCPU execution. If the MSR write was unsuccessful, userspace also sets the +"error" field to "1". + +See KVM_X86_SET_MSR_FILTER for details on the interaction with MSR filtering. + +:: + + + struct kvm_xen_exit { + #define KVM_EXIT_XEN_HCALL 1 + __u32 type; + union { + struct { + __u32 longmode; + __u32 cpl; + __u64 input; + __u64 result; + __u64 params[6]; + } hcall; + } u; + }; + /* KVM_EXIT_XEN */ + struct kvm_hyperv_exit xen; + +Indicates that the VCPU exits into userspace to process some tasks +related to Xen emulation. + +Valid values for 'type' are: + + - KVM_EXIT_XEN_HCALL -- synchronously notify user-space about Xen hypercall. + Userspace is expected to place the hypercall result into the appropriate + field before invoking KVM_RUN again. + +:: + + /* KVM_EXIT_RISCV_SBI */ + struct { + unsigned long extension_id; + unsigned long function_id; + unsigned long args[6]; + unsigned long ret[2]; + } riscv_sbi; + +If exit reason is KVM_EXIT_RISCV_SBI then it indicates that the VCPU has +done a SBI call which is not handled by KVM RISC-V kernel module. The details +of the SBI call are available in 'riscv_sbi' member of kvm_run structure. The +'extension_id' field of 'riscv_sbi' represents SBI extension ID whereas the +'function_id' field represents function ID of given SBI extension. The 'args' +array field of 'riscv_sbi' represents parameters for the SBI call and 'ret' +array field represents return values. The userspace should update the return +values of SBI call before resuming the VCPU. For more details on RISC-V SBI +spec refer, https://github.com/riscv/riscv-sbi-doc. + +:: + + /* KVM_EXIT_NOTIFY */ + struct { + #define KVM_NOTIFY_CONTEXT_INVALID (1 << 0) + __u32 flags; + } notify; + +Used on x86 systems. When the VM capability KVM_CAP_X86_NOTIFY_VMEXIT is +enabled, a VM exit generated if no event window occurs in VM non-root mode +for a specified amount of time. Once KVM_X86_NOTIFY_VMEXIT_USER is set when +enabling the cap, it would exit to userspace with the exit reason +KVM_EXIT_NOTIFY for further handling. The "flags" field contains more +detailed info. + +The valid value for 'flags' is: + + - KVM_NOTIFY_CONTEXT_INVALID -- the VM context is corrupted and not valid + in VMCS. It would run into unknown result if resume the target VM. + +:: + + /* Fix the size of the union. */ + char padding[256]; + }; + + /* + * shared registers between kvm and userspace. + * kvm_valid_regs specifies the register classes set by the host + * kvm_dirty_regs specified the register classes dirtied by userspace + * struct kvm_sync_regs is architecture specific, as well as the + * bits for kvm_valid_regs and kvm_dirty_regs + */ + __u64 kvm_valid_regs; + __u64 kvm_dirty_regs; + union { + struct kvm_sync_regs regs; + char padding[SYNC_REGS_SIZE_BYTES]; + } s; + +If KVM_CAP_SYNC_REGS is defined, these fields allow userspace to access +certain guest registers without having to call SET/GET_*REGS. Thus we can +avoid some system call overhead if userspace has to handle the exit. +Userspace can query the validity of the structure by checking +kvm_valid_regs for specific bits. These bits are architecture specific +and usually define the validity of a groups of registers. (e.g. one bit +for general purpose registers) + +Please note that the kernel is allowed to use the kvm_run structure as the +primary storage for certain register types. Therefore, the kernel may use the +values in kvm_run even if the corresponding bit in kvm_dirty_regs is not set. + + +6. Capabilities that can be enabled on vCPUs +============================================ + +There are certain capabilities that change the behavior of the virtual CPU or +the virtual machine when enabled. To enable them, please see section 4.37. +Below you can find a list of capabilities and what their effect on the vCPU or +the virtual machine is when enabling them. + +The following information is provided along with the description: + + Architectures: + which instruction set architectures provide this ioctl. + x86 includes both i386 and x86_64. + + Target: + whether this is a per-vcpu or per-vm capability. + + Parameters: + what parameters are accepted by the capability. + + Returns: + the return value. General error numbers (EBADF, ENOMEM, EINVAL) + are not detailed, but errors with specific meanings are. + + +6.1 KVM_CAP_PPC_OSI +------------------- + +:Architectures: ppc +:Target: vcpu +:Parameters: none +:Returns: 0 on success; -1 on error + +This capability enables interception of OSI hypercalls that otherwise would +be treated as normal system calls to be injected into the guest. OSI hypercalls +were invented by Mac-on-Linux to have a standardized communication mechanism +between the guest and the host. + +When this capability is enabled, KVM_EXIT_OSI can occur. + + +6.2 KVM_CAP_PPC_PAPR +-------------------- + +:Architectures: ppc +:Target: vcpu +:Parameters: none +:Returns: 0 on success; -1 on error + +This capability enables interception of PAPR hypercalls. PAPR hypercalls are +done using the hypercall instruction "sc 1". + +It also sets the guest privilege level to "supervisor" mode. Usually the guest +runs in "hypervisor" privilege mode with a few missing features. + +In addition to the above, it changes the semantics of SDR1. In this mode, the +HTAB address part of SDR1 contains an HVA instead of a GPA, as PAPR keeps the +HTAB invisible to the guest. + +When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur. + + +6.3 KVM_CAP_SW_TLB +------------------ + +:Architectures: ppc +:Target: vcpu +:Parameters: args[0] is the address of a struct kvm_config_tlb +:Returns: 0 on success; -1 on error + +:: + + struct kvm_config_tlb { + __u64 params; + __u64 array; + __u32 mmu_type; + __u32 array_len; + }; + +Configures the virtual CPU's TLB array, establishing a shared memory area +between userspace and KVM. The "params" and "array" fields are userspace +addresses of mmu-type-specific data structures. The "array_len" field is an +safety mechanism, and should be set to the size in bytes of the memory that +userspace has reserved for the array. It must be at least the size dictated +by "mmu_type" and "params". + +While KVM_RUN is active, the shared region is under control of KVM. Its +contents are undefined, and any modification by userspace results in +boundedly undefined behavior. + +On return from KVM_RUN, the shared region will reflect the current state of +the guest's TLB. If userspace makes any changes, it must call KVM_DIRTY_TLB +to tell KVM which entries have been changed, prior to calling KVM_RUN again +on this vcpu. + +For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV: + + - The "params" field is of type "struct kvm_book3e_206_tlb_params". + - The "array" field points to an array of type "struct + kvm_book3e_206_tlb_entry". + - The array consists of all entries in the first TLB, followed by all + entries in the second TLB. + - Within a TLB, entries are ordered first by increasing set number. Within a + set, entries are ordered by way (increasing ESEL). + - The hash for determining set number in TLB0 is: (MAS2 >> 12) & (num_sets - 1) + where "num_sets" is the tlb_sizes[] value divided by the tlb_ways[] value. + - The tsize field of mas1 shall be set to 4K on TLB0, even though the + hardware ignores this value for TLB0. + +6.4 KVM_CAP_S390_CSS_SUPPORT +---------------------------- + +:Architectures: s390 +:Target: vcpu +:Parameters: none +:Returns: 0 on success; -1 on error + +This capability enables support for handling of channel I/O instructions. + +TEST PENDING INTERRUPTION and the interrupt portion of TEST SUBCHANNEL are +handled in-kernel, while the other I/O instructions are passed to userspace. + +When this capability is enabled, KVM_EXIT_S390_TSCH will occur on TEST +SUBCHANNEL intercepts. + +Note that even though this capability is enabled per-vcpu, the complete +virtual machine is affected. + +6.5 KVM_CAP_PPC_EPR +------------------- + +:Architectures: ppc +:Target: vcpu +:Parameters: args[0] defines whether the proxy facility is active +:Returns: 0 on success; -1 on error + +This capability enables or disables the delivery of interrupts through the +external proxy facility. + +When enabled (args[0] != 0), every time the guest gets an external interrupt +delivered, it automatically exits into user space with a KVM_EXIT_EPR exit +to receive the topmost interrupt vector. + +When disabled (args[0] == 0), behavior is as if this facility is unsupported. + +When this capability is enabled, KVM_EXIT_EPR can occur. + +6.6 KVM_CAP_IRQ_MPIC +-------------------- + +:Architectures: ppc +:Parameters: args[0] is the MPIC device fd; + args[1] is the MPIC CPU number for this vcpu + +This capability connects the vcpu to an in-kernel MPIC device. + +6.7 KVM_CAP_IRQ_XICS +-------------------- + +:Architectures: ppc +:Target: vcpu +:Parameters: args[0] is the XICS device fd; + args[1] is the XICS CPU number (server ID) for this vcpu + +This capability connects the vcpu to an in-kernel XICS device. + +6.8 KVM_CAP_S390_IRQCHIP +------------------------ + +:Architectures: s390 +:Target: vm +:Parameters: none + +This capability enables the in-kernel irqchip for s390. Please refer to +"4.24 KVM_CREATE_IRQCHIP" for details. + +6.9 KVM_CAP_MIPS_FPU +-------------------- + +:Architectures: mips +:Target: vcpu +:Parameters: args[0] is reserved for future use (should be 0). + +This capability allows the use of the host Floating Point Unit by the guest. It +allows the Config1.FP bit to be set to enable the FPU in the guest. Once this is +done the ``KVM_REG_MIPS_FPR_*`` and ``KVM_REG_MIPS_FCR_*`` registers can be +accessed (depending on the current guest FPU register mode), and the Status.FR, +Config5.FRE bits are accessible via the KVM API and also from the guest, +depending on them being supported by the FPU. + +6.10 KVM_CAP_MIPS_MSA +--------------------- + +:Architectures: mips +:Target: vcpu +:Parameters: args[0] is reserved for future use (should be 0). + +This capability allows the use of the MIPS SIMD Architecture (MSA) by the guest. +It allows the Config3.MSAP bit to be set to enable the use of MSA by the guest. +Once this is done the ``KVM_REG_MIPS_VEC_*`` and ``KVM_REG_MIPS_MSA_*`` +registers can be accessed, and the Config5.MSAEn bit is accessible via the +KVM API and also from the guest. + +6.74 KVM_CAP_SYNC_REGS +---------------------- + +:Architectures: s390, x86 +:Target: s390: always enabled, x86: vcpu +:Parameters: none +:Returns: x86: KVM_CHECK_EXTENSION returns a bit-array indicating which register + sets are supported + (bitfields defined in arch/x86/include/uapi/asm/kvm.h). + +As described above in the kvm_sync_regs struct info in section 5 (kvm_run): +KVM_CAP_SYNC_REGS "allow[s] userspace to access certain guest registers +without having to call SET/GET_*REGS". This reduces overhead by eliminating +repeated ioctl calls for setting and/or getting register values. This is +particularly important when userspace is making synchronous guest state +modifications, e.g. when emulating and/or intercepting instructions in +userspace. + +For s390 specifics, please refer to the source code. + +For x86: + +- the register sets to be copied out to kvm_run are selectable + by userspace (rather that all sets being copied out for every exit). +- vcpu_events are available in addition to regs and sregs. + +For x86, the 'kvm_valid_regs' field of struct kvm_run is overloaded to +function as an input bit-array field set by userspace to indicate the +specific register sets to be copied out on the next exit. + +To indicate when userspace has modified values that should be copied into +the vCPU, the all architecture bitarray field, 'kvm_dirty_regs' must be set. +This is done using the same bitflags as for the 'kvm_valid_regs' field. +If the dirty bit is not set, then the register set values will not be copied +into the vCPU even if they've been modified. + +Unused bitfields in the bitarrays must be set to zero. + +:: + + struct kvm_sync_regs { + struct kvm_regs regs; + struct kvm_sregs sregs; + struct kvm_vcpu_events events; + }; + +6.75 KVM_CAP_PPC_IRQ_XIVE +------------------------- + +:Architectures: ppc +:Target: vcpu +:Parameters: args[0] is the XIVE device fd; + args[1] is the XIVE CPU number (server ID) for this vcpu + +This capability connects the vcpu to an in-kernel XIVE device. + +7. Capabilities that can be enabled on VMs +========================================== + +There are certain capabilities that change the behavior of the virtual +machine when enabled. To enable them, please see section 4.37. Below +you can find a list of capabilities and what their effect on the VM +is when enabling them. + +The following information is provided along with the description: + + Architectures: + which instruction set architectures provide this ioctl. + x86 includes both i386 and x86_64. + + Parameters: + what parameters are accepted by the capability. + + Returns: + the return value. General error numbers (EBADF, ENOMEM, EINVAL) + are not detailed, but errors with specific meanings are. + + +7.1 KVM_CAP_PPC_ENABLE_HCALL +---------------------------- + +:Architectures: ppc +:Parameters: args[0] is the sPAPR hcall number; + args[1] is 0 to disable, 1 to enable in-kernel handling + +This capability controls whether individual sPAPR hypercalls (hcalls) +get handled by the kernel or not. Enabling or disabling in-kernel +handling of an hcall is effective across the VM. On creation, an +initial set of hcalls are enabled for in-kernel handling, which +consists of those hcalls for which in-kernel handlers were implemented +before this capability was implemented. If disabled, the kernel will +not to attempt to handle the hcall, but will always exit to userspace +to handle it. Note that it may not make sense to enable some and +disable others of a group of related hcalls, but KVM does not prevent +userspace from doing that. + +If the hcall number specified is not one that has an in-kernel +implementation, the KVM_ENABLE_CAP ioctl will fail with an EINVAL +error. + +7.2 KVM_CAP_S390_USER_SIGP +-------------------------- + +:Architectures: s390 +:Parameters: none + +This capability controls which SIGP orders will be handled completely in user +space. With this capability enabled, all fast orders will be handled completely +in the kernel: + +- SENSE +- SENSE RUNNING +- EXTERNAL CALL +- EMERGENCY SIGNAL +- CONDITIONAL EMERGENCY SIGNAL + +All other orders will be handled completely in user space. + +Only privileged operation exceptions will be checked for in the kernel (or even +in the hardware prior to interception). If this capability is not enabled, the +old way of handling SIGP orders is used (partially in kernel and user space). + +7.3 KVM_CAP_S390_VECTOR_REGISTERS +--------------------------------- + +:Architectures: s390 +:Parameters: none +:Returns: 0 on success, negative value on error + +Allows use of the vector registers introduced with z13 processor, and +provides for the synchronization between host and user space. Will +return -EINVAL if the machine does not support vectors. + +7.4 KVM_CAP_S390_USER_STSI +-------------------------- + +:Architectures: s390 +:Parameters: none + +This capability allows post-handlers for the STSI instruction. After +initial handling in the kernel, KVM exits to user space with +KVM_EXIT_S390_STSI to allow user space to insert further data. + +Before exiting to userspace, kvm handlers should fill in s390_stsi field of +vcpu->run:: + + struct { + __u64 addr; + __u8 ar; + __u8 reserved; + __u8 fc; + __u8 sel1; + __u16 sel2; + } s390_stsi; + + @addr - guest address of STSI SYSIB + @fc - function code + @sel1 - selector 1 + @sel2 - selector 2 + @ar - access register number + +KVM handlers should exit to userspace with rc = -EREMOTE. + +7.5 KVM_CAP_SPLIT_IRQCHIP +------------------------- + +:Architectures: x86 +:Parameters: args[0] - number of routes reserved for userspace IOAPICs +:Returns: 0 on success, -1 on error + +Create a local apic for each processor in the kernel. This can be used +instead of KVM_CREATE_IRQCHIP if the userspace VMM wishes to emulate the +IOAPIC and PIC (and also the PIT, even though this has to be enabled +separately). + +This capability also enables in kernel routing of interrupt requests; +when KVM_CAP_SPLIT_IRQCHIP only routes of KVM_IRQ_ROUTING_MSI type are +used in the IRQ routing table. The first args[0] MSI routes are reserved +for the IOAPIC pins. Whenever the LAPIC receives an EOI for these routes, +a KVM_EXIT_IOAPIC_EOI vmexit will be reported to userspace. + +Fails if VCPU has already been created, or if the irqchip is already in the +kernel (i.e. KVM_CREATE_IRQCHIP has already been called). + +7.6 KVM_CAP_S390_RI +------------------- + +:Architectures: s390 +:Parameters: none + +Allows use of runtime-instrumentation introduced with zEC12 processor. +Will return -EINVAL if the machine does not support runtime-instrumentation. +Will return -EBUSY if a VCPU has already been created. + +7.7 KVM_CAP_X2APIC_API +---------------------- + +:Architectures: x86 +:Parameters: args[0] - features that should be enabled +:Returns: 0 on success, -EINVAL when args[0] contains invalid features + +Valid feature flags in args[0] are:: + + #define KVM_X2APIC_API_USE_32BIT_IDS (1ULL << 0) + #define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK (1ULL << 1) + +Enabling KVM_X2APIC_API_USE_32BIT_IDS changes the behavior of +KVM_SET_GSI_ROUTING, KVM_SIGNAL_MSI, KVM_SET_LAPIC, and KVM_GET_LAPIC, +allowing the use of 32-bit APIC IDs. See KVM_CAP_X2APIC_API in their +respective sections. + +KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK must be enabled for x2APIC to work +in logical mode or with more than 255 VCPUs. Otherwise, KVM treats 0xff +as a broadcast even in x2APIC mode in order to support physical x2APIC +without interrupt remapping. This is undesirable in logical mode, +where 0xff represents CPUs 0-7 in cluster 0. + +7.8 KVM_CAP_S390_USER_INSTR0 +---------------------------- + +:Architectures: s390 +:Parameters: none + +With this capability enabled, all illegal instructions 0x0000 (2 bytes) will +be intercepted and forwarded to user space. User space can use this +mechanism e.g. to realize 2-byte software breakpoints. The kernel will +not inject an operating exception for these instructions, user space has +to take care of that. + +This capability can be enabled dynamically even if VCPUs were already +created and are running. + +7.9 KVM_CAP_S390_GS +------------------- + +:Architectures: s390 +:Parameters: none +:Returns: 0 on success; -EINVAL if the machine does not support + guarded storage; -EBUSY if a VCPU has already been created. + +Allows use of guarded storage for the KVM guest. + +7.10 KVM_CAP_S390_AIS +--------------------- + +:Architectures: s390 +:Parameters: none + +Allow use of adapter-interruption suppression. +:Returns: 0 on success; -EBUSY if a VCPU has already been created. + +7.11 KVM_CAP_PPC_SMT +-------------------- + +:Architectures: ppc +:Parameters: vsmt_mode, flags + +Enabling this capability on a VM provides userspace with a way to set +the desired virtual SMT mode (i.e. the number of virtual CPUs per +virtual core). The virtual SMT mode, vsmt_mode, must be a power of 2 +between 1 and 8. On POWER8, vsmt_mode must also be no greater than +the number of threads per subcore for the host. Currently flags must +be 0. A successful call to enable this capability will result in +vsmt_mode being returned when the KVM_CAP_PPC_SMT capability is +subsequently queried for the VM. This capability is only supported by +HV KVM, and can only be set before any VCPUs have been created. +The KVM_CAP_PPC_SMT_POSSIBLE capability indicates which virtual SMT +modes are available. + +7.12 KVM_CAP_PPC_FWNMI +---------------------- + +:Architectures: ppc +:Parameters: none + +With this capability a machine check exception in the guest address +space will cause KVM to exit the guest with NMI exit reason. This +enables QEMU to build error log and branch to guest kernel registered +machine check handling routine. Without this capability KVM will +branch to guests' 0x200 interrupt vector. + +7.13 KVM_CAP_X86_DISABLE_EXITS +------------------------------ + +:Architectures: x86 +:Parameters: args[0] defines which exits are disabled +:Returns: 0 on success, -EINVAL when args[0] contains invalid exits + +Valid bits in args[0] are:: + + #define KVM_X86_DISABLE_EXITS_MWAIT (1 << 0) + #define KVM_X86_DISABLE_EXITS_HLT (1 << 1) + #define KVM_X86_DISABLE_EXITS_PAUSE (1 << 2) + #define KVM_X86_DISABLE_EXITS_CSTATE (1 << 3) + +Enabling this capability on a VM provides userspace with a way to no +longer intercept some instructions for improved latency in some +workloads, and is suggested when vCPUs are associated to dedicated +physical CPUs. More bits can be added in the future; userspace can +just pass the KVM_CHECK_EXTENSION result to KVM_ENABLE_CAP to disable +all such vmexits. + +Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits. + +7.14 KVM_CAP_S390_HPAGE_1M +-------------------------- + +:Architectures: s390 +:Parameters: none +:Returns: 0 on success, -EINVAL if hpage module parameter was not set + or cmma is enabled, or the VM has the KVM_VM_S390_UCONTROL + flag set + +With this capability the KVM support for memory backing with 1m pages +through hugetlbfs can be enabled for a VM. After the capability is +enabled, cmma can't be enabled anymore and pfmfi and the storage key +interpretation are disabled. If cmma has already been enabled or the +hpage module parameter is not set to 1, -EINVAL is returned. + +While it is generally possible to create a huge page backed VM without +this capability, the VM will not be able to run. + +7.15 KVM_CAP_MSR_PLATFORM_INFO +------------------------------ + +:Architectures: x86 +:Parameters: args[0] whether feature should be enabled or not + +With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise, +a #GP would be raised when the guest tries to access. Currently, this +capability does not enable write permissions of this MSR for the guest. + +7.16 KVM_CAP_PPC_NESTED_HV +-------------------------- + +:Architectures: ppc +:Parameters: none +:Returns: 0 on success, -EINVAL when the implementation doesn't support + nested-HV virtualization. + +HV-KVM on POWER9 and later systems allows for "nested-HV" +virtualization, which provides a way for a guest VM to run guests that +can run using the CPU's supervisor mode (privileged non-hypervisor +state). Enabling this capability on a VM depends on the CPU having +the necessary functionality and on the facility being enabled with a +kvm-hv module parameter. + +7.17 KVM_CAP_EXCEPTION_PAYLOAD +------------------------------ + +:Architectures: x86 +:Parameters: args[0] whether feature should be enabled or not + +With this capability enabled, CR2 will not be modified prior to the +emulated VM-exit when L1 intercepts a #PF exception that occurs in +L2. Similarly, for kvm-intel only, DR6 will not be modified prior to +the emulated VM-exit when L1 intercepts a #DB exception that occurs in +L2. As a result, when KVM_GET_VCPU_EVENTS reports a pending #PF (or +#DB) exception for L2, exception.has_payload will be set and the +faulting address (or the new DR6 bits*) will be reported in the +exception_payload field. Similarly, when userspace injects a #PF (or +#DB) into L2 using KVM_SET_VCPU_EVENTS, it is expected to set +exception.has_payload and to put the faulting address - or the new DR6 +bits\ [#]_ - in the exception_payload field. + +This capability also enables exception.pending in struct +kvm_vcpu_events, which allows userspace to distinguish between pending +and injected exceptions. + + +.. [#] For the new DR6 bits, note that bit 16 is set iff the #DB exception + will clear DR6.RTM. + +7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 +-------------------------------------- + +:Architectures: x86, arm64, mips +:Parameters: args[0] whether feature should be enabled or not + +Valid flags are:: + + #define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (1 << 0) + #define KVM_DIRTY_LOG_INITIALLY_SET (1 << 1) + +With KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE is set, KVM_GET_DIRTY_LOG will not +automatically clear and write-protect all pages that are returned as dirty. +Rather, userspace will have to do this operation separately using +KVM_CLEAR_DIRTY_LOG. + +At the cost of a slightly more complicated operation, this provides better +scalability and responsiveness for two reasons. First, +KVM_CLEAR_DIRTY_LOG ioctl can operate on a 64-page granularity rather +than requiring to sync a full memslot; this ensures that KVM does not +take spinlocks for an extended period of time. Second, in some cases a +large amount of time can pass between a call to KVM_GET_DIRTY_LOG and +userspace actually using the data in the page. Pages can be modified +during this time, which is inefficient for both the guest and userspace: +the guest will incur a higher penalty due to write protection faults, +while userspace can see false reports of dirty pages. Manual reprotection +helps reducing this time, improving guest performance and reducing the +number of dirty log false positives. + +With KVM_DIRTY_LOG_INITIALLY_SET set, all the bits of the dirty bitmap +will be initialized to 1 when created. This also improves performance because +dirty logging can be enabled gradually in small chunks on the first call +to KVM_CLEAR_DIRTY_LOG. KVM_DIRTY_LOG_INITIALLY_SET depends on +KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (it is also only available on +x86 and arm64 for now). + +KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 was previously available under the name +KVM_CAP_MANUAL_DIRTY_LOG_PROTECT, but the implementation had bugs that make +it hard or impossible to use it correctly. The availability of +KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 signals that those bugs are fixed. +Userspace should not try to use KVM_CAP_MANUAL_DIRTY_LOG_PROTECT. + +7.19 KVM_CAP_PPC_SECURE_GUEST +------------------------------ + +:Architectures: ppc + +This capability indicates that KVM is running on a host that has +ultravisor firmware and thus can support a secure guest. On such a +system, a guest can ask the ultravisor to make it a secure guest, +one whose memory is inaccessible to the host except for pages which +are explicitly requested to be shared with the host. The ultravisor +notifies KVM when a guest requests to become a secure guest, and KVM +has the opportunity to veto the transition. + +If present, this capability can be enabled for a VM, meaning that KVM +will allow the transition to secure guest mode. Otherwise KVM will +veto the transition. + +7.20 KVM_CAP_HALT_POLL +---------------------- + +:Architectures: all +:Target: VM +:Parameters: args[0] is the maximum poll time in nanoseconds +:Returns: 0 on success; -1 on error + +KVM_CAP_HALT_POLL overrides the kvm.halt_poll_ns module parameter to set the +maximum halt-polling time for all vCPUs in the target VM. This capability can +be invoked at any time and any number of times to dynamically change the +maximum halt-polling time. + +See Documentation/virt/kvm/halt-polling.rst for more information on halt +polling. + +7.21 KVM_CAP_X86_USER_SPACE_MSR +------------------------------- + +:Architectures: x86 +:Target: VM +:Parameters: args[0] contains the mask of KVM_MSR_EXIT_REASON_* events to report +:Returns: 0 on success; -1 on error + +This capability allows userspace to intercept RDMSR and WRMSR instructions if +access to an MSR is denied. By default, KVM injects #GP on denied accesses. + +When a guest requests to read or write an MSR, KVM may not implement all MSRs +that are relevant to a respective system. It also does not differentiate by +CPU type. + +To allow more fine grained control over MSR handling, userspace may enable +this capability. With it enabled, MSR accesses that match the mask specified in +args[0] and would trigger a #GP inside the guest will instead trigger +KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR exit notifications. Userspace +can then implement model specific MSR handling and/or user notifications +to inform a user that an MSR was not emulated/virtualized by KVM. + +The valid mask flags are: + +============================ =============================================== + KVM_MSR_EXIT_REASON_UNKNOWN intercept accesses to unknown (to KVM) MSRs + KVM_MSR_EXIT_REASON_INVAL intercept accesses that are architecturally + invalid according to the vCPU model and/or mode + KVM_MSR_EXIT_REASON_FILTER intercept accesses that are denied by userspace + via KVM_X86_SET_MSR_FILTER +============================ =============================================== + +7.22 KVM_CAP_X86_BUS_LOCK_EXIT +------------------------------- + +:Architectures: x86 +:Target: VM +:Parameters: args[0] defines the policy used when bus locks detected in guest +:Returns: 0 on success, -EINVAL when args[0] contains invalid bits + +Valid bits in args[0] are:: + + #define KVM_BUS_LOCK_DETECTION_OFF (1 << 0) + #define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) + +Enabling this capability on a VM provides userspace with a way to select +a policy to handle the bus locks detected in guest. Userspace can obtain +the supported modes from the result of KVM_CHECK_EXTENSION and define it +through the KVM_ENABLE_CAP. + +KVM_BUS_LOCK_DETECTION_OFF and KVM_BUS_LOCK_DETECTION_EXIT are supported +currently and mutually exclusive with each other. More bits can be added in +the future. + +With KVM_BUS_LOCK_DETECTION_OFF set, bus locks in guest will not cause vm exits +so that no additional actions are needed. This is the default mode. + +With KVM_BUS_LOCK_DETECTION_EXIT set, vm exits happen when bus lock detected +in VM. KVM just exits to userspace when handling them. Userspace can enforce +its own throttling or other policy based mitigations. + +This capability is aimed to address the thread that VM can exploit bus locks to +degree the performance of the whole system. Once the userspace enable this +capability and select the KVM_BUS_LOCK_DETECTION_EXIT mode, KVM will set the +KVM_RUN_BUS_LOCK flag in vcpu-run->flags field and exit to userspace. Concerning +the bus lock vm exit can be preempted by a higher priority VM exit, the exit +notifications to userspace can be KVM_EXIT_BUS_LOCK or other reasons. +KVM_RUN_BUS_LOCK flag is used to distinguish between them. + +7.23 KVM_CAP_PPC_DAWR1 +---------------------- + +:Architectures: ppc +:Parameters: none +:Returns: 0 on success, -EINVAL when CPU doesn't support 2nd DAWR + +This capability can be used to check / enable 2nd DAWR feature provided +by POWER10 processor. + + +7.24 KVM_CAP_VM_COPY_ENC_CONTEXT_FROM +------------------------------------- + +Architectures: x86 SEV enabled +Type: vm +Parameters: args[0] is the fd of the source vm +Returns: 0 on success; ENOTTY on error + +This capability enables userspace to copy encryption context from the vm +indicated by the fd to the vm this is called on. + +This is intended to support in-guest workloads scheduled by the host. This +allows the in-guest workload to maintain its own NPTs and keeps the two vms +from accidentally clobbering each other with interrupts and the like (separate +APIC/MSRs/etc). + +7.25 KVM_CAP_SGX_ATTRIBUTE +-------------------------- + +:Architectures: x86 +:Target: VM +:Parameters: args[0] is a file handle of a SGX attribute file in securityfs +:Returns: 0 on success, -EINVAL if the file handle is invalid or if a requested + attribute is not supported by KVM. + +KVM_CAP_SGX_ATTRIBUTE enables a userspace VMM to grant a VM access to one or +more privileged enclave attributes. args[0] must hold a file handle to a valid +SGX attribute file corresponding to an attribute that is supported/restricted +by KVM (currently only PROVISIONKEY). + +The SGX subsystem restricts access to a subset of enclave attributes to provide +additional security for an uncompromised kernel, e.g. use of the PROVISIONKEY +is restricted to deter malware from using the PROVISIONKEY to obtain a stable +system fingerprint. To prevent userspace from circumventing such restrictions +by running an enclave in a VM, KVM prevents access to privileged attributes by +default. + +See Documentation/arch/x86/sgx.rst for more details. + +7.26 KVM_CAP_PPC_RPT_INVALIDATE +------------------------------- + +:Capability: KVM_CAP_PPC_RPT_INVALIDATE +:Architectures: ppc +:Type: vm + +This capability indicates that the kernel is capable of handling +H_RPT_INVALIDATE hcall. + +In order to enable the use of H_RPT_INVALIDATE in the guest, +user space might have to advertise it for the guest. For example, +IBM pSeries (sPAPR) guest starts using it if "hcall-rpt-invalidate" is +present in the "ibm,hypertas-functions" device-tree property. + +This capability is enabled for hypervisors on platforms like POWER9 +that support radix MMU. + +7.27 KVM_CAP_EXIT_ON_EMULATION_FAILURE +-------------------------------------- + +:Architectures: x86 +:Parameters: args[0] whether the feature should be enabled or not + +When this capability is enabled, an emulation failure will result in an exit +to userspace with KVM_INTERNAL_ERROR (except when the emulator was invoked +to handle a VMware backdoor instruction). Furthermore, KVM will now provide up +to 15 instruction bytes for any exit to userspace resulting from an emulation +failure. When these exits to userspace occur use the emulation_failure struct +instead of the internal struct. They both have the same layout, but the +emulation_failure struct matches the content better. It also explicitly +defines the 'flags' field which is used to describe the fields in the struct +that are valid (ie: if KVM_INTERNAL_ERROR_EMULATION_FLAG_INSTRUCTION_BYTES is +set in the 'flags' field then both 'insn_size' and 'insn_bytes' have valid data +in them.) + +7.28 KVM_CAP_ARM_MTE +-------------------- + +:Architectures: arm64 +:Parameters: none + +This capability indicates that KVM (and the hardware) supports exposing the +Memory Tagging Extensions (MTE) to the guest. It must also be enabled by the +VMM before creating any VCPUs to allow the guest access. Note that MTE is only +available to a guest running in AArch64 mode and enabling this capability will +cause attempts to create AArch32 VCPUs to fail. + +When enabled the guest is able to access tags associated with any memory given +to the guest. KVM will ensure that the tags are maintained during swap or +hibernation of the host; however the VMM needs to manually save/restore the +tags as appropriate if the VM is migrated. + +When this capability is enabled all memory in memslots must be mapped as +``MAP_ANONYMOUS`` or with a RAM-based file mapping (``tmpfs``, ``memfd``), +attempts to create a memslot with an invalid mmap will result in an +-EINVAL return. + +When enabled the VMM may make use of the ``KVM_ARM_MTE_COPY_TAGS`` ioctl to +perform a bulk copy of tags to/from the guest. + +7.29 KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM +------------------------------------- + +Architectures: x86 SEV enabled +Type: vm +Parameters: args[0] is the fd of the source vm +Returns: 0 on success + +This capability enables userspace to migrate the encryption context from the VM +indicated by the fd to the VM this is called on. + +This is intended to support intra-host migration of VMs between userspace VMMs, +upgrading the VMM process without interrupting the guest. + +7.30 KVM_CAP_PPC_AIL_MODE_3 +------------------------------- + +:Capability: KVM_CAP_PPC_AIL_MODE_3 +:Architectures: ppc +:Type: vm + +This capability indicates that the kernel supports the mode 3 setting for the +"Address Translation Mode on Interrupt" aka "Alternate Interrupt Location" +resource that is controlled with the H_SET_MODE hypercall. + +This capability allows a guest kernel to use a better-performance mode for +handling interrupts and system calls. + +7.31 KVM_CAP_DISABLE_QUIRKS2 +---------------------------- + +:Capability: KVM_CAP_DISABLE_QUIRKS2 +:Parameters: args[0] - set of KVM quirks to disable +:Architectures: x86 +:Type: vm + +This capability, if enabled, will cause KVM to disable some behavior +quirks. + +Calling KVM_CHECK_EXTENSION for this capability returns a bitmask of +quirks that can be disabled in KVM. + +The argument to KVM_ENABLE_CAP for this capability is a bitmask of +quirks to disable, and must be a subset of the bitmask returned by +KVM_CHECK_EXTENSION. + +The valid bits in cap.args[0] are: + +=================================== ============================================ + KVM_X86_QUIRK_LINT0_REENABLED By default, the reset value for the LVT + LINT0 register is 0x700 (APIC_MODE_EXTINT). + When this quirk is disabled, the reset value + is 0x10000 (APIC_LVT_MASKED). + + KVM_X86_QUIRK_CD_NW_CLEARED By default, KVM clears CR0.CD and CR0.NW. + When this quirk is disabled, KVM does not + change the value of CR0.CD and CR0.NW. + + KVM_X86_QUIRK_LAPIC_MMIO_HOLE By default, the MMIO LAPIC interface is + available even when configured for x2APIC + mode. When this quirk is disabled, KVM + disables the MMIO LAPIC interface if the + LAPIC is in x2APIC mode. + + KVM_X86_QUIRK_OUT_7E_INC_RIP By default, KVM pre-increments %rip before + exiting to userspace for an OUT instruction + to port 0x7e. When this quirk is disabled, + KVM does not pre-increment %rip before + exiting to userspace. + + KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT When this quirk is disabled, KVM sets + CPUID.01H:ECX[bit 3] (MONITOR/MWAIT) if + IA32_MISC_ENABLE[bit 18] (MWAIT) is set. + Additionally, when this quirk is disabled, + KVM clears CPUID.01H:ECX[bit 3] if + IA32_MISC_ENABLE[bit 18] is cleared. + + KVM_X86_QUIRK_FIX_HYPERCALL_INSN By default, KVM rewrites guest + VMMCALL/VMCALL instructions to match the + vendor's hypercall instruction for the + system. When this quirk is disabled, KVM + will no longer rewrite invalid guest + hypercall instructions. Executing the + incorrect hypercall instruction will + generate a #UD within the guest. + +KVM_X86_QUIRK_MWAIT_NEVER_UD_FAULTS By default, KVM emulates MONITOR/MWAIT (if + they are intercepted) as NOPs regardless of + whether or not MONITOR/MWAIT are supported + according to guest CPUID. When this quirk + is disabled and KVM_X86_DISABLE_EXITS_MWAIT + is not set (MONITOR/MWAIT are intercepted), + KVM will inject a #UD on MONITOR/MWAIT if + they're unsupported per guest CPUID. Note, + KVM will modify MONITOR/MWAIT support in + guest CPUID on writes to MISC_ENABLE if + KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT is + disabled. +=================================== ============================================ + +7.32 KVM_CAP_MAX_VCPU_ID +------------------------ + +:Architectures: x86 +:Target: VM +:Parameters: args[0] - maximum APIC ID value set for current VM +:Returns: 0 on success, -EINVAL if args[0] is beyond KVM_MAX_VCPU_IDS + supported in KVM or if it has been set. + +This capability allows userspace to specify maximum possible APIC ID +assigned for current VM session prior to the creation of vCPUs, saving +memory for data structures indexed by the APIC ID. Userspace is able +to calculate the limit to APIC ID values from designated +CPU topology. + +The value can be changed only until KVM_ENABLE_CAP is set to a nonzero +value or until a vCPU is created. Upon creation of the first vCPU, +if the value was set to zero or KVM_ENABLE_CAP was not invoked, KVM +uses the return value of KVM_CHECK_EXTENSION(KVM_CAP_MAX_VCPU_ID) as +the maximum APIC ID. + +7.33 KVM_CAP_X86_NOTIFY_VMEXIT +------------------------------ + +:Architectures: x86 +:Target: VM +:Parameters: args[0] is the value of notify window as well as some flags +:Returns: 0 on success, -EINVAL if args[0] contains invalid flags or notify + VM exit is unsupported. + +Bits 63:32 of args[0] are used for notify window. +Bits 31:0 of args[0] are for some flags. Valid bits are:: + + #define KVM_X86_NOTIFY_VMEXIT_ENABLED (1 << 0) + #define KVM_X86_NOTIFY_VMEXIT_USER (1 << 1) + +This capability allows userspace to configure the notify VM exit on/off +in per-VM scope during VM creation. Notify VM exit is disabled by default. +When userspace sets KVM_X86_NOTIFY_VMEXIT_ENABLED bit in args[0], VMM will +enable this feature with the notify window provided, which will generate +a VM exit if no event window occurs in VM non-root mode for a specified of +time (notify window). + +If KVM_X86_NOTIFY_VMEXIT_USER is set in args[0], upon notify VM exits happen, +KVM would exit to userspace for handling. + +This capability is aimed to mitigate the threat that malicious VMs can +cause CPU stuck (due to event windows don't open up) and make the CPU +unavailable to host or other VMs. + +8. Other capabilities. +====================== + +This section lists capabilities that give information about other +features of the KVM implementation. + +8.1 KVM_CAP_PPC_HWRNG +--------------------- + +:Architectures: ppc + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that the kernel has an implementation of the +H_RANDOM hypercall backed by a hardware random-number generator. +If present, the kernel H_RANDOM handler can be enabled for guest use +with the KVM_CAP_PPC_ENABLE_HCALL capability. + +8.2 KVM_CAP_HYPERV_SYNIC +------------------------ + +:Architectures: x86 + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that the kernel has an implementation of the +Hyper-V Synthetic interrupt controller(SynIC). Hyper-V SynIC is +used to support Windows Hyper-V based guest paravirt drivers(VMBus). + +In order to use SynIC, it has to be activated by setting this +capability via KVM_ENABLE_CAP ioctl on the vcpu fd. Note that this +will disable the use of APIC hardware virtualization even if supported +by the CPU, as it's incompatible with SynIC auto-EOI behavior. + +8.3 KVM_CAP_PPC_RADIX_MMU +------------------------- + +:Architectures: ppc + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that the kernel can support guests using the +radix MMU defined in Power ISA V3.00 (as implemented in the POWER9 +processor). + +8.4 KVM_CAP_PPC_HASH_MMU_V3 +--------------------------- + +:Architectures: ppc + +This capability, if KVM_CHECK_EXTENSION indicates that it is +available, means that the kernel can support guests using the +hashed page table MMU defined in Power ISA V3.00 (as implemented in +the POWER9 processor), including in-memory segment tables. + +8.5 KVM_CAP_MIPS_VZ +------------------- + +:Architectures: mips + +This capability, if KVM_CHECK_EXTENSION on the main kvm handle indicates that +it is available, means that full hardware assisted virtualization capabilities +of the hardware are available for use through KVM. An appropriate +KVM_VM_MIPS_* type must be passed to KVM_CREATE_VM to create a VM which +utilises it. + +If KVM_CHECK_EXTENSION on a kvm VM handle indicates that this capability is +available, it means that the VM is using full hardware assisted virtualization +capabilities of the hardware. This is useful to check after creating a VM with +KVM_VM_MIPS_DEFAULT. + +The value returned by KVM_CHECK_EXTENSION should be compared against known +values (see below). All other values are reserved. This is to allow for the +possibility of other hardware assisted virtualization implementations which +may be incompatible with the MIPS VZ ASE. + +== ========================================================================== + 0 The trap & emulate implementation is in use to run guest code in user + mode. Guest virtual memory segments are rearranged to fit the guest in the + user mode address space. + + 1 The MIPS VZ ASE is in use, providing full hardware assisted + virtualization, including standard guest virtual memory segments. +== ========================================================================== + +8.6 KVM_CAP_MIPS_TE +------------------- + +:Architectures: mips + +This capability, if KVM_CHECK_EXTENSION on the main kvm handle indicates that +it is available, means that the trap & emulate implementation is available to +run guest code in user mode, even if KVM_CAP_MIPS_VZ indicates that hardware +assisted virtualisation is also available. KVM_VM_MIPS_TE (0) must be passed +to KVM_CREATE_VM to create a VM which utilises it. + +If KVM_CHECK_EXTENSION on a kvm VM handle indicates that this capability is +available, it means that the VM is using trap & emulate. + +8.7 KVM_CAP_MIPS_64BIT +---------------------- + +:Architectures: mips + +This capability indicates the supported architecture type of the guest, i.e. the +supported register and address width. + +The values returned when this capability is checked by KVM_CHECK_EXTENSION on a +kvm VM handle correspond roughly to the CP0_Config.AT register field, and should +be checked specifically against known values (see below). All other values are +reserved. + +== ======================================================================== + 0 MIPS32 or microMIPS32. + Both registers and addresses are 32-bits wide. + It will only be possible to run 32-bit guest code. + + 1 MIPS64 or microMIPS64 with access only to 32-bit compatibility segments. + Registers are 64-bits wide, but addresses are 32-bits wide. + 64-bit guest code may run but cannot access MIPS64 memory segments. + It will also be possible to run 32-bit guest code. + + 2 MIPS64 or microMIPS64 with access to all address segments. + Both registers and addresses are 64-bits wide. + It will be possible to run 64-bit or 32-bit guest code. +== ======================================================================== + +8.9 KVM_CAP_ARM_USER_IRQ +------------------------ + +:Architectures: arm64 + +This capability, if KVM_CHECK_EXTENSION indicates that it is available, means +that if userspace creates a VM without an in-kernel interrupt controller, it +will be notified of changes to the output level of in-kernel emulated devices, +which can generate virtual interrupts, presented to the VM. +For such VMs, on every return to userspace, the kernel +updates the vcpu's run->s.regs.device_irq_level field to represent the actual +output level of the device. + +Whenever kvm detects a change in the device output level, kvm guarantees at +least one return to userspace before running the VM. This exit could either +be a KVM_EXIT_INTR or any other exit event, like KVM_EXIT_MMIO. This way, +userspace can always sample the device output level and re-compute the state of +the userspace interrupt controller. Userspace should always check the state +of run->s.regs.device_irq_level on every kvm exit. +The value in run->s.regs.device_irq_level can represent both level and edge +triggered interrupt signals, depending on the device. Edge triggered interrupt +signals will exit to userspace with the bit in run->s.regs.device_irq_level +set exactly once per edge signal. + +The field run->s.regs.device_irq_level is available independent of +run->kvm_valid_regs or run->kvm_dirty_regs bits. + +If KVM_CAP_ARM_USER_IRQ is supported, the KVM_CHECK_EXTENSION ioctl returns a +number larger than 0 indicating the version of this capability is implemented +and thereby which bits in run->s.regs.device_irq_level can signal values. + +Currently the following bits are defined for the device_irq_level bitmap:: + + KVM_CAP_ARM_USER_IRQ >= 1: + + KVM_ARM_DEV_EL1_VTIMER - EL1 virtual timer + KVM_ARM_DEV_EL1_PTIMER - EL1 physical timer + KVM_ARM_DEV_PMU - ARM PMU overflow interrupt signal + +Future versions of kvm may implement additional events. These will get +indicated by returning a higher number from KVM_CHECK_EXTENSION and will be +listed above. + +8.10 KVM_CAP_PPC_SMT_POSSIBLE +----------------------------- + +:Architectures: ppc + +Querying this capability returns a bitmap indicating the possible +virtual SMT modes that can be set using KVM_CAP_PPC_SMT. If bit N +(counting from the right) is set, then a virtual SMT mode of 2^N is +available. + +8.11 KVM_CAP_HYPERV_SYNIC2 +-------------------------- + +:Architectures: x86 + +This capability enables a newer version of Hyper-V Synthetic interrupt +controller (SynIC). The only difference with KVM_CAP_HYPERV_SYNIC is that KVM +doesn't clear SynIC message and event flags pages when they are enabled by +writing to the respective MSRs. + +8.12 KVM_CAP_HYPERV_VP_INDEX +---------------------------- + +:Architectures: x86 + +This capability indicates that userspace can load HV_X64_MSR_VP_INDEX msr. Its +value is used to denote the target vcpu for a SynIC interrupt. For +compatibility, KVM initializes this msr to KVM's internal vcpu index. When this +capability is absent, userspace can still query this msr's value. + +8.13 KVM_CAP_S390_AIS_MIGRATION +------------------------------- + +:Architectures: s390 +:Parameters: none + +This capability indicates if the flic device will be able to get/set the +AIS states for migration via the KVM_DEV_FLIC_AISM_ALL attribute and allows +to discover this without having to create a flic device. + +8.14 KVM_CAP_S390_PSW +--------------------- + +:Architectures: s390 + +This capability indicates that the PSW is exposed via the kvm_run structure. + +8.15 KVM_CAP_S390_GMAP +---------------------- + +:Architectures: s390 + +This capability indicates that the user space memory used as guest mapping can +be anywhere in the user memory address space, as long as the memory slots are +aligned and sized to a segment (1MB) boundary. + +8.16 KVM_CAP_S390_COW +--------------------- + +:Architectures: s390 + +This capability indicates that the user space memory used as guest mapping can +use copy-on-write semantics as well as dirty pages tracking via read-only page +tables. + +8.17 KVM_CAP_S390_BPB +--------------------- + +:Architectures: s390 + +This capability indicates that kvm will implement the interfaces to handle +reset, migration and nested KVM for branch prediction blocking. The stfle +facility 82 should not be provided to the guest without this capability. + +8.18 KVM_CAP_HYPERV_TLBFLUSH +---------------------------- + +:Architectures: x86 + +This capability indicates that KVM supports paravirtualized Hyper-V TLB Flush +hypercalls: +HvFlushVirtualAddressSpace, HvFlushVirtualAddressSpaceEx, +HvFlushVirtualAddressList, HvFlushVirtualAddressListEx. + +8.19 KVM_CAP_ARM_INJECT_SERROR_ESR +---------------------------------- + +:Architectures: arm64 + +This capability indicates that userspace can specify (via the +KVM_SET_VCPU_EVENTS ioctl) the syndrome value reported to the guest when it +takes a virtual SError interrupt exception. +If KVM advertises this capability, userspace can only specify the ISS field for +the ESR syndrome. Other parts of the ESR, such as the EC are generated by the +CPU when the exception is taken. If this virtual SError is taken to EL1 using +AArch64, this value will be reported in the ISS field of ESR_ELx. + +See KVM_CAP_VCPU_EVENTS for more details. + +8.20 KVM_CAP_HYPERV_SEND_IPI +---------------------------- + +:Architectures: x86 + +This capability indicates that KVM supports paravirtualized Hyper-V IPI send +hypercalls: +HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx. + +8.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH +----------------------------------- + +:Architectures: x86 + +This capability indicates that KVM running on top of Hyper-V hypervisor +enables Direct TLB flush for its guests meaning that TLB flush +hypercalls are handled by Level 0 hypervisor (Hyper-V) bypassing KVM. +Due to the different ABI for hypercall parameters between Hyper-V and +KVM, enabling this capability effectively disables all hypercall +handling by KVM (as some KVM hypercall may be mistakenly treated as TLB +flush hypercalls by Hyper-V) so userspace should disable KVM identification +in CPUID and only exposes Hyper-V identification. In this case, guest +thinks it's running on Hyper-V and only use Hyper-V hypercalls. + +8.22 KVM_CAP_S390_VCPU_RESETS +----------------------------- + +:Architectures: s390 + +This capability indicates that the KVM_S390_NORMAL_RESET and +KVM_S390_CLEAR_RESET ioctls are available. + +8.23 KVM_CAP_S390_PROTECTED +--------------------------- + +:Architectures: s390 + +This capability indicates that the Ultravisor has been initialized and +KVM can therefore start protected VMs. +This capability governs the KVM_S390_PV_COMMAND ioctl and the +KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected +guests when the state change is invalid. + +8.24 KVM_CAP_STEAL_TIME +----------------------- + +:Architectures: arm64, x86 + +This capability indicates that KVM supports steal time accounting. +When steal time accounting is supported it may be enabled with +architecture-specific interfaces. This capability and the architecture- +specific interfaces must be consistent, i.e. if one says the feature +is supported, than the other should as well and vice versa. For arm64 +see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL". +For x86 see Documentation/virt/kvm/x86/msr.rst "MSR_KVM_STEAL_TIME". + +8.25 KVM_CAP_S390_DIAG318 +------------------------- + +:Architectures: s390 + +This capability enables a guest to set information about its control program +(i.e. guest kernel type and version). The information is helpful during +system/firmware service events, providing additional data about the guest +environments running on the machine. + +The information is associated with the DIAGNOSE 0x318 instruction, which sets +an 8-byte value consisting of a one-byte Control Program Name Code (CPNC) and +a 7-byte Control Program Version Code (CPVC). The CPNC determines what +environment the control program is running in (e.g. Linux, z/VM...), and the +CPVC is used for information specific to OS (e.g. Linux version, Linux +distribution...) + +If this capability is available, then the CPNC and CPVC can be synchronized +between KVM and userspace via the sync regs mechanism (KVM_SYNC_DIAG318). + +8.26 KVM_CAP_X86_USER_SPACE_MSR +------------------------------- + +:Architectures: x86 + +This capability indicates that KVM supports deflection of MSR reads and +writes to user space. It can be enabled on a VM level. If enabled, MSR +accesses that would usually trigger a #GP by KVM into the guest will +instead get bounced to user space through the KVM_EXIT_X86_RDMSR and +KVM_EXIT_X86_WRMSR exit notifications. + +8.27 KVM_CAP_X86_MSR_FILTER +--------------------------- + +:Architectures: x86 + +This capability indicates that KVM supports that accesses to user defined MSRs +may be rejected. With this capability exposed, KVM exports new VM ioctl +KVM_X86_SET_MSR_FILTER which user space can call to specify bitmaps of MSR +ranges that KVM should deny access to. + +In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to +trap and emulate MSRs that are outside of the scope of KVM as well as +limit the attack surface on KVM's MSR emulation code. + +8.28 KVM_CAP_ENFORCE_PV_FEATURE_CPUID +------------------------------------- + +Architectures: x86 + +When enabled, KVM will disable paravirtual features provided to the +guest according to the bits in the KVM_CPUID_FEATURES CPUID leaf +(0x40000001). Otherwise, a guest may use the paravirtual features +regardless of what has actually been exposed through the CPUID leaf. + +8.29 KVM_CAP_DIRTY_LOG_RING/KVM_CAP_DIRTY_LOG_RING_ACQ_REL +---------------------------------------------------------- + +:Architectures: x86, arm64 +:Parameters: args[0] - size of the dirty log ring + +KVM is capable of tracking dirty memory using ring buffers that are +mmapped into userspace; there is one dirty ring per vcpu. + +The dirty ring is available to userspace as an array of +``struct kvm_dirty_gfn``. Each dirty entry is defined as:: + + struct kvm_dirty_gfn { + __u32 flags; + __u32 slot; /* as_id | slot_id */ + __u64 offset; + }; + +The following values are defined for the flags field to define the +current state of the entry:: + + #define KVM_DIRTY_GFN_F_DIRTY BIT(0) + #define KVM_DIRTY_GFN_F_RESET BIT(1) + #define KVM_DIRTY_GFN_F_MASK 0x3 + +Userspace should call KVM_ENABLE_CAP ioctl right after KVM_CREATE_VM +ioctl to enable this capability for the new guest and set the size of +the rings. Enabling the capability is only allowed before creating any +vCPU, and the size of the ring must be a power of two. The larger the +ring buffer, the less likely the ring is full and the VM is forced to +exit to userspace. The optimal size depends on the workload, but it is +recommended that it be at least 64 KiB (4096 entries). + +Just like for dirty page bitmaps, the buffer tracks writes to +all user memory regions for which the KVM_MEM_LOG_DIRTY_PAGES flag was +set in KVM_SET_USER_MEMORY_REGION. Once a memory region is registered +with the flag set, userspace can start harvesting dirty pages from the +ring buffer. + +An entry in the ring buffer can be unused (flag bits ``00``), +dirty (flag bits ``01``) or harvested (flag bits ``1X``). The +state machine for the entry is as follows:: + + dirtied harvested reset + 00 -----------> 01 -------------> 1X -------+ + ^ | + | | + +------------------------------------------+ + +To harvest the dirty pages, userspace accesses the mmapped ring buffer +to read the dirty GFNs. If the flags has the DIRTY bit set (at this stage +the RESET bit must be cleared), then it means this GFN is a dirty GFN. +The userspace should harvest this GFN and mark the flags from state +``01b`` to ``1Xb`` (bit 0 will be ignored by KVM, but bit 1 must be set +to show that this GFN is harvested and waiting for a reset), and move +on to the next GFN. The userspace should continue to do this until the +flags of a GFN have the DIRTY bit cleared, meaning that it has harvested +all the dirty GFNs that were available. + +Note that on weakly ordered architectures, userspace accesses to the +ring buffer (and more specifically the 'flags' field) must be ordered, +using load-acquire/store-release accessors when available, or any +other memory barrier that will ensure this ordering. + +It's not necessary for userspace to harvest the all dirty GFNs at once. +However it must collect the dirty GFNs in sequence, i.e., the userspace +program cannot skip one dirty GFN to collect the one next to it. + +After processing one or more entries in the ring buffer, userspace +calls the VM ioctl KVM_RESET_DIRTY_RINGS to notify the kernel about +it, so that the kernel will reprotect those collected GFNs. +Therefore, the ioctl must be called *before* reading the content of +the dirty pages. + +The dirty ring can get full. When it happens, the KVM_RUN of the +vcpu will return with exit reason KVM_EXIT_DIRTY_LOG_FULL. + +The dirty ring interface has a major difference comparing to the +KVM_GET_DIRTY_LOG interface in that, when reading the dirty ring from +userspace, it's still possible that the kernel has not yet flushed the +processor's dirty page buffers into the kernel buffer (with dirty bitmaps, the +flushing is done by the KVM_GET_DIRTY_LOG ioctl). To achieve that, one +needs to kick the vcpu out of KVM_RUN using a signal. The resulting +vmexit ensures that all dirty GFNs are flushed to the dirty rings. + +NOTE: KVM_CAP_DIRTY_LOG_RING_ACQ_REL is the only capability that +should be exposed by weakly ordered architecture, in order to indicate +the additional memory ordering requirements imposed on userspace when +reading the state of an entry and mutating it from DIRTY to HARVESTED. +Architecture with TSO-like ordering (such as x86) are allowed to +expose both KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL +to userspace. + +After enabling the dirty rings, the userspace needs to detect the +capability of KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP to see whether the +ring structures can be backed by per-slot bitmaps. With this capability +advertised, it means the architecture can dirty guest pages without +vcpu/ring context, so that some of the dirty information will still be +maintained in the bitmap structure. KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP +can't be enabled if the capability of KVM_CAP_DIRTY_LOG_RING_ACQ_REL +hasn't been enabled, or any memslot has been existing. + +Note that the bitmap here is only a backup of the ring structure. The +use of the ring and bitmap combination is only beneficial if there is +only a very small amount of memory that is dirtied out of vcpu/ring +context. Otherwise, the stand-alone per-slot bitmap mechanism needs to +be considered. + +To collect dirty bits in the backup bitmap, userspace can use the same +KVM_GET_DIRTY_LOG ioctl. KVM_CLEAR_DIRTY_LOG isn't needed as long as all +the generation of the dirty bits is done in a single pass. Collecting +the dirty bitmap should be the very last thing that the VMM does before +considering the state as complete. VMM needs to ensure that the dirty +state is final and avoid missing dirty pages from another ioctl ordered +after the bitmap collection. + +NOTE: Multiple examples of using the backup bitmap: (1) save vgic/its +tables through command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} on +KVM device "kvm-arm-vgic-its". (2) restore vgic/its tables through +command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} on KVM device +"kvm-arm-vgic-its". VGICv3 LPI pending status is restored. (3) save +vgic3 pending table through KVM_DEV_ARM_VGIC_{GRP_CTRL, SAVE_PENDING_TABLES} +command on KVM device "kvm-arm-vgic-v3". + +8.30 KVM_CAP_XEN_HVM +-------------------- + +:Architectures: x86 + +This capability indicates the features that Xen supports for hosting Xen +PVHVM guests. Valid flags are:: + + #define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR (1 << 0) + #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1) + #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) + #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) + #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) + #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) + #define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG (1 << 6) + +The KVM_XEN_HVM_CONFIG_HYPERCALL_MSR flag indicates that the KVM_XEN_HVM_CONFIG +ioctl is available, for the guest to set its hypercall page. + +If KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL is also set, the same flag may also be +provided in the flags to KVM_XEN_HVM_CONFIG, without providing hypercall page +contents, to request that KVM generate hypercall page content automatically +and also enable interception of guest hypercalls with KVM_EXIT_XEN. + +The KVM_XEN_HVM_CONFIG_SHARED_INFO flag indicates the availability of the +KVM_XEN_HVM_SET_ATTR, KVM_XEN_HVM_GET_ATTR, KVM_XEN_VCPU_SET_ATTR and +KVM_XEN_VCPU_GET_ATTR ioctls, as well as the delivery of exception vectors +for event channel upcalls when the evtchn_upcall_pending field of a vcpu's +vcpu_info is set. + +The KVM_XEN_HVM_CONFIG_RUNSTATE flag indicates that the runstate-related +features KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR/_CURRENT/_DATA/_ADJUST are +supported by the KVM_XEN_VCPU_SET_ATTR/KVM_XEN_VCPU_GET_ATTR ioctls. + +The KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL flag indicates that IRQ routing entries +of the type KVM_IRQ_ROUTING_XEN_EVTCHN are supported, with the priority +field set to indicate 2 level event channel delivery. + +The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates that KVM supports +injecting event channel events directly into the guest with the +KVM_XEN_HVM_EVTCHN_SEND ioctl. It also indicates support for the +KVM_XEN_ATTR_TYPE_EVTCHN/XEN_VERSION HVM attributes and the +KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID/TIMER/UPCALL_VECTOR vCPU attributes. +related to event channel delivery, timers, and the XENVER_version +interception. + +The KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG flag indicates that KVM supports +the KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG attribute in the KVM_XEN_SET_ATTR +and KVM_XEN_GET_ATTR ioctls. This controls whether KVM will set the +XEN_RUNSTATE_UPDATE flag in guest memory mapped vcpu_runstate_info during +updates of the runstate information. Note that versions of KVM which support +the RUNSTATE feature above, but not the RUNSTATE_UPDATE_FLAG feature, will +always set the XEN_RUNSTATE_UPDATE flag when updating the guest structure, +which is perhaps counterintuitive. When this flag is advertised, KVM will +behave more correctly, not using the XEN_RUNSTATE_UPDATE flag until/unless +specifically enabled (by the guest making the hypercall, causing the VMM +to enable the KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG attribute). + +8.31 KVM_CAP_PPC_MULTITCE +------------------------- + +:Capability: KVM_CAP_PPC_MULTITCE +:Architectures: ppc +:Type: vm + +This capability means the kernel is capable of handling hypercalls +H_PUT_TCE_INDIRECT and H_STUFF_TCE without passing those into the user +space. This significantly accelerates DMA operations for PPC KVM guests. +User space should expect that its handlers for these hypercalls +are not going to be called if user space previously registered LIOBN +in KVM (via KVM_CREATE_SPAPR_TCE or similar calls). + +In order to enable H_PUT_TCE_INDIRECT and H_STUFF_TCE use in the guest, +user space might have to advertise it for the guest. For example, +IBM pSeries (sPAPR) guest starts using them if "hcall-multi-tce" is +present in the "ibm,hypertas-functions" device-tree property. + +The hypercalls mentioned above may or may not be processed successfully +in the kernel based fast path. If they can not be handled by the kernel, +they will get passed on to user space. So user space still has to have +an implementation for these despite the in kernel acceleration. + +This capability is always enabled. + +8.32 KVM_CAP_PTP_KVM +-------------------- + +:Architectures: arm64 + +This capability indicates that the KVM virtual PTP service is +supported in the host. A VMM can check whether the service is +available to the guest on migration. + +8.33 KVM_CAP_HYPERV_ENFORCE_CPUID +--------------------------------- + +Architectures: x86 + +When enabled, KVM will disable emulated Hyper-V features provided to the +guest according to the bits Hyper-V CPUID feature leaves. Otherwise, all +currently implemented Hyper-V features are provided unconditionally when +Hyper-V identification is set in the HYPERV_CPUID_INTERFACE (0x40000001) +leaf. + +8.34 KVM_CAP_EXIT_HYPERCALL +--------------------------- + +:Capability: KVM_CAP_EXIT_HYPERCALL +:Architectures: x86 +:Type: vm + +This capability, if enabled, will cause KVM to exit to userspace +with KVM_EXIT_HYPERCALL exit reason to process some hypercalls. + +Calling KVM_CHECK_EXTENSION for this capability will return a bitmask +of hypercalls that can be configured to exit to userspace. +Right now, the only such hypercall is KVM_HC_MAP_GPA_RANGE. + +The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset +of the result of KVM_CHECK_EXTENSION. KVM will forward to userspace +the hypercalls whose corresponding bit is in the argument, and return +ENOSYS for the others. + +8.35 KVM_CAP_PMU_CAPABILITY +--------------------------- + +:Capability: KVM_CAP_PMU_CAPABILITY +:Architectures: x86 +:Type: vm +:Parameters: arg[0] is bitmask of PMU virtualization capabilities. +:Returns: 0 on success, -EINVAL when arg[0] contains invalid bits + +This capability alters PMU virtualization in KVM. + +Calling KVM_CHECK_EXTENSION for this capability returns a bitmask of +PMU virtualization capabilities that can be adjusted on a VM. + +The argument to KVM_ENABLE_CAP is also a bitmask and selects specific +PMU virtualization capabilities to be applied to the VM. This can +only be invoked on a VM prior to the creation of VCPUs. + +At this time, KVM_PMU_CAP_DISABLE is the only capability. Setting +this capability will disable PMU virtualization for that VM. Usermode +should adjust CPUID leaf 0xA to reflect that the PMU is disabled. + +8.36 KVM_CAP_ARM_SYSTEM_SUSPEND +------------------------------- + +:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND +:Architectures: arm64 +:Type: vm + +When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of +type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request. + +8.37 KVM_CAP_S390_PROTECTED_DUMP +-------------------------------- + +:Capability: KVM_CAP_S390_PROTECTED_DUMP +:Architectures: s390 +:Type: vm + +This capability indicates that KVM and the Ultravisor support dumping +PV guests. The `KVM_PV_DUMP` command is available for the +`KVM_S390_PV_COMMAND` ioctl and the `KVM_PV_INFO` command provides +dump related UV data. Also the vcpu ioctl `KVM_S390_PV_CPU_COMMAND` is +available and supports the `KVM_PV_DUMP_CPU` subcommand. + +8.38 KVM_CAP_VM_DISABLE_NX_HUGE_PAGES +------------------------------------- + +:Capability: KVM_CAP_VM_DISABLE_NX_HUGE_PAGES +:Architectures: x86 +:Type: vm +:Parameters: arg[0] must be 0. +:Returns: 0 on success, -EPERM if the userspace process does not + have CAP_SYS_BOOT, -EINVAL if args[0] is not 0 or any vCPUs have been + created. + +This capability disables the NX huge pages mitigation for iTLB MULTIHIT. + +The capability has no effect if the nx_huge_pages module parameter is not set. + +This capability may only be set before any vCPUs are created. + +8.39 KVM_CAP_S390_CPU_TOPOLOGY +------------------------------ + +:Capability: KVM_CAP_S390_CPU_TOPOLOGY +:Architectures: s390 +:Type: vm + +This capability indicates that KVM will provide the S390 CPU Topology +facility which consist of the interpretation of the PTF instruction for +the function code 2 along with interception and forwarding of both the +PTF instruction with function codes 0 or 1 and the STSI(15,1,x) +instruction to the userland hypervisor. + +The stfle facility 11, CPU Topology facility, should not be indicated +to the guest without this capability. + +When this capability is present, KVM provides a new attribute group +on vm fd, KVM_S390_VM_CPU_TOPOLOGY. +This new attribute allows to get, set or clear the Modified Change +Topology Report (MTCR) bit of the SCA through the kvm_device_attr +structure. + +When getting the Modified Change Topology Report value, the attr->addr +must point to a byte where the value will be stored or retrieved from. + +8.40 KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE +--------------------------------------- + +:Capability: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE +:Architectures: arm64 +:Type: vm +:Parameters: arg[0] is the new split chunk size. +:Returns: 0 on success, -EINVAL if any memslot was already created. + +This capability sets the chunk size used in Eager Page Splitting. + +Eager Page Splitting improves the performance of dirty-logging (used +in live migrations) when guest memory is backed by huge-pages. It +avoids splitting huge-pages (into PAGE_SIZE pages) on fault, by doing +it eagerly when enabling dirty logging (with the +KVM_MEM_LOG_DIRTY_PAGES flag for a memory region), or when using +KVM_CLEAR_DIRTY_LOG. + +The chunk size specifies how many pages to break at a time, using a +single allocation for each chunk. Bigger the chunk size, more pages +need to be allocated ahead of time. + +The chunk size needs to be a valid block size. The list of acceptable +block sizes is exposed in KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES as a +64-bit bitmap (each bit describing a block size). The default value is +0, to disable the eager page splitting. + +9. Known KVM API problems +========================= + +In some cases, KVM's API has some inconsistencies or common pitfalls +that userspace need to be aware of. This section details some of +these issues. + +Most of them are architecture specific, so the section is split by +architecture. + +9.1. x86 +-------- + +``KVM_GET_SUPPORTED_CPUID`` issues +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible +to take its result and pass it directly to ``KVM_SET_CPUID2``. This section +documents some cases in which that requires some care. + +Local APIC features +~~~~~~~~~~~~~~~~~~~ + +CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``, +but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or +``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of +the local APIC. + +The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature. + +CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``. +It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel +has enabled in-kernel emulation of the local APIC. + +CPU topology +~~~~~~~~~~~~ + +Several CPUID values include topology information for the host CPU: +0x0b and 0x1f for Intel systems, 0x8000001e for AMD systems. Different +versions of KVM return different values for this information and userspace +should not rely on it. Currently they return all zeroes. + +If userspace wishes to set up a guest topology, it should be careful that +the values of these three leaves differ for each CPU. In particular, +the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX +for 0x8000001e; the latter also encodes the core id and node id in bits +7:0 of EBX and ECX respectively. + +Obsolete ioctls and capabilities +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually +available. Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if +available. + +Ordering of KVM_GET_*/KVM_SET_* ioctls +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +TBD diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst new file mode 100644 index 0000000000..412b276449 --- /dev/null +++ b/Documentation/virt/kvm/arm/hyp-abi.rst @@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +Internal ABI between the kernel and HYP +======================================= + +This file documents the interaction between the Linux kernel and the +hypervisor layer when running Linux as a hypervisor (for example +KVM). It doesn't cover the interaction of the kernel with the +hypervisor when running as a guest (under Xen, KVM or any other +hypervisor), or any hypervisor-specific interaction when the kernel is +used as a host. + +Note: KVM/arm has been removed from the kernel. The API described +here is still valid though, as it allows the kernel to kexec when +booted at HYP. It can also be used by a hypervisor other than KVM +if necessary. + +On arm and arm64 (without VHE), the kernel doesn't run in hypervisor +mode, but still needs to interact with it, allowing a built-in +hypervisor to be either installed or torn down. + +In order to achieve this, the kernel must be booted at HYP (arm) or +EL2 (arm64), allowing it to install a set of stubs before dropping to +SVC/EL1. These stubs are accessible by using a 'hvc #0' instruction, +and only act on individual CPUs. + +Unless specified otherwise, any built-in hypervisor must implement +these functions (see arch/arm{,64}/include/asm/virt.h): + +* :: + + r0/x0 = HVC_SET_VECTORS + r1/x1 = vectors + + Set HVBAR/VBAR_EL2 to 'vectors' to enable a hypervisor. 'vectors' + must be a physical address, and respect the alignment requirements + of the architecture. Only implemented by the initial stubs, not by + Linux hypervisors. + +* :: + + r0/x0 = HVC_RESET_VECTORS + + Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials + stubs' exception vector value. This effectively disables an existing + hypervisor. + +* :: + + r0/x0 = HVC_SOFT_RESTART + r1/x1 = restart address + x2 = x0's value when entering the next payload (arm64) + x3 = x1's value when entering the next payload (arm64) + x4 = x2's value when entering the next payload (arm64) + + Mask all exceptions, disable the MMU, clear I+D bits, move the arguments + into place (arm64 only), and jump to the restart address while at HYP/EL2. + This hypercall is not expected to return to its caller. + +* :: + + x0 = HVC_FINALISE_EL2 (arm64 only) + + Finish configuring EL2 depending on the command-line options, + including an attempt to upgrade the kernel's exception level from + EL1 to EL2 by enabling the VHE mode. This is conditioned by the CPU + supporting VHE, the EL2 MMU being off, and VHE not being disabled by + any other means (command line option, for example). + +Any other value of r0/x0 triggers a hypervisor-specific handling, +which is not documented here. + +The return value of a stub hypercall is held by r0/x0, and is 0 on +success, and HVC_STUB_ERR on error. A stub hypercall is allowed to +clobber any of the caller-saved registers (x0-x18 on arm64, r0-r3 and +ip on arm). It is thus recommended to use a function call to perform +the hypercall. diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst new file mode 100644 index 0000000000..3e23084644 --- /dev/null +++ b/Documentation/virt/kvm/arm/hypercalls.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +ARM Hypercall Interface +======================= + +KVM handles the hypercall services as requested by the guests. New hypercall +services are regularly made available by the ARM specification or by KVM (as +vendor services) if they make sense from a virtualization point of view. + +This means that a guest booted on two different versions of KVM can observe +two different "firmware" revisions. This could cause issues if a given guest +is tied to a particular version of a hypercall service, or if a migration +causes a different version to be exposed out of the blue to an unsuspecting +guest. + +In order to remedy this situation, KVM exposes a set of "firmware +pseudo-registers" that can be manipulated using the GET/SET_ONE_REG +interface. These registers can be saved/restored by userspace, and set +to a convenient value as required. + +The following registers are defined: + +* KVM_REG_ARM_PSCI_VERSION: + + KVM implements the PSCI (Power State Coordination Interface) + specification in order to provide services such as CPU on/off, reset + and power-off to the guest. + + - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set + (and thus has already been initialized) + - Returns the current PSCI version on GET_ONE_REG (defaulting to the + highest PSCI version implemented by KVM and compatible with v0.2) + - Allows any PSCI version implemented by KVM and compatible with + v0.2 to be set with SET_ONE_REG + - Affects the whole VM (even if the register view is per-vcpu) + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1: + Holds the state of the firmware support to mitigate CVE-2017-5715, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_1 in [1]. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL: + KVM does not offer + firmware support for the workaround. The mitigation status for the + guest is unknown. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL: + The workaround HVC call is + available to the guest and required for the mitigation. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED: + The workaround HVC call + is available to the guest, but it is not needed on this VCPU. + +* KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2: + Holds the state of the firmware support to mitigate CVE-2018-3639, as + offered by KVM to the guest via a HVC call. The workaround is described + under SMCCC_ARCH_WORKAROUND_2 in [1]_. + + Accepted values are: + + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL: + A workaround is not + available. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN: + The workaround state is + unknown. KVM does not offer firmware support for the workaround. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL: + The workaround is available, + and can be disabled by a vCPU. If + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED is set, it is active for + this vCPU. + KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED: + The workaround is always active on this vCPU or it is not needed. + + +Bitmap Feature Firmware Registers +--------------------------------- + +Contrary to the above registers, the following registers exposes the +hypercall services in the form of a feature-bitmap to the userspace. This +bitmap is translated to the services that are available to the guest. +There is a register defined per service call owner and can be accessed via +GET/SET_ONE_REG interface. + +By default, these registers are set with the upper limit of the features +that are supported. This way userspace can discover all the usable +hypercall services via GET_ONE_REG. The user-space can write-back the +desired bitmap back via SET_ONE_REG. The features for the registers that +are untouched, probably because userspace isn't aware of them, will be +exposed as is to the guest. + +Note that KVM will not allow the userspace to configure the registers +anymore once any of the vCPUs has run at least once. Instead, it will +return a -EBUSY. + +The pseudo-firmware bitmap register are as follows: + +* KVM_REG_ARM_STD_BMAP: + Controls the bitmap of the ARM Standard Secure Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0: + The bit represents the services offered under v1.0 of ARM True Random + Number Generator (TRNG) specification, ARM DEN0098. + +* KVM_REG_ARM_STD_HYP_BMAP: + Controls the bitmap of the ARM Standard Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME: + The bit represents the Paravirtualized Time service as represented by + ARM DEN0057A. + +* KVM_REG_ARM_VENDOR_HYP_BMAP: + Controls the bitmap of the Vendor specific Hypervisor Service Calls. + + The following bits are accepted: + + Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT + The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID + and ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID function-ids. + + Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP: + The bit represents the Precision Time Protocol KVM service. + +Errors: + + ======= ============================================================= + -ENOENT Unknown register accessed. + -EBUSY Attempt a 'write' to the register after the VM has started. + -EINVAL Invalid bitmap written to the register. + ======= ============================================================= + +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf diff --git a/Documentation/virt/kvm/arm/index.rst b/Documentation/virt/kvm/arm/index.rst new file mode 100644 index 0000000000..e848484321 --- /dev/null +++ b/Documentation/virt/kvm/arm/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=== +ARM +=== + +.. toctree:: + :maxdepth: 2 + + hyp-abi + hypercalls + pvtime + ptp_kvm diff --git a/Documentation/virt/kvm/arm/ptp_kvm.rst b/Documentation/virt/kvm/arm/ptp_kvm.rst new file mode 100644 index 0000000000..aecdc80ddc --- /dev/null +++ b/Documentation/virt/kvm/arm/ptp_kvm.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +PTP_KVM support for arm/arm64 +============================= + +PTP_KVM is used for high precision time sync between host and guests. +It relies on transferring the wall clock and counter value from the +host to the guest using a KVM-specific hypercall. + +* ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID: 0x86000001 + +This hypercall uses the SMC32/HVC32 calling convention: + +ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID + ============== ======== ===================================== + Function ID: (uint32) 0x86000001 + Arguments: (uint32) KVM_PTP_VIRT_COUNTER(0) + KVM_PTP_PHYS_COUNTER(1) + Return Values: (int32) NOT_SUPPORTED(-1) on error, or + (uint32) Upper 32 bits of wall clock time (r0) + (uint32) Lower 32 bits of wall clock time (r1) + (uint32) Upper 32 bits of counter (r2) + (uint32) Lower 32 bits of counter (r3) + Endianness: No Restrictions. + ============== ======== ===================================== diff --git a/Documentation/virt/kvm/arm/pvtime.rst b/Documentation/virt/kvm/arm/pvtime.rst new file mode 100644 index 0000000000..e88b34e586 --- /dev/null +++ b/Documentation/virt/kvm/arm/pvtime.rst @@ -0,0 +1,82 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Paravirtualized time support for arm64 +====================================== + +Arm specification DEN0057/A defines a standard for paravirtualised time +support for AArch64 guests: + +https://developer.arm.com/docs/den0057/a + +KVM/arm64 implements the stolen time part of this specification by providing +some hypervisor service calls to support a paravirtualized guest obtaining a +view of the amount of time stolen from its execution. + +Two new SMCCC compatible hypercalls are defined: + +* PV_TIME_FEATURES: 0xC5000020 +* PV_TIME_ST: 0xC5000021 + +These are only available in the SMC64/HVC64 calling convention as +paravirtualized time is not available to 32 bit Arm guests. The existence of +the PV_TIME_FEATURES hypercall should be probed using the SMCCC 1.1 +ARCH_FEATURES mechanism before calling it. + +PV_TIME_FEATURES + + ============= ======== ================================================= + Function ID: (uint32) 0xC5000020 + PV_call_id: (uint32) The function to query for support. + Currently only PV_TIME_ST is supported. + Return value: (int64) NOT_SUPPORTED (-1) or SUCCESS (0) if the relevant + PV-time feature is supported by the hypervisor. + ============= ======== ================================================= + +PV_TIME_ST + + ============= ======== ============================================== + Function ID: (uint32) 0xC5000021 + Return value: (int64) IPA of the stolen time data structure for this + VCPU. On failure: + NOT_SUPPORTED (-1) + ============= ======== ============================================== + +The IPA returned by PV_TIME_ST should be mapped by the guest as normal memory +with inner and outer write back caching attributes, in the inner shareable +domain. A total of 16 bytes from the IPA returned are guaranteed to be +meaningfully filled by the hypervisor (see structure below). + +PV_TIME_ST returns the structure for the calling VCPU. + +Stolen Time +----------- + +The structure pointed to by the PV_TIME_ST hypercall is as follows: + ++-------------+-------------+-------------+----------------------------+ +| Field | Byte Length | Byte Offset | Description | ++=============+=============+=============+============================+ +| Revision | 4 | 0 | Must be 0 for version 1.0 | ++-------------+-------------+-------------+----------------------------+ +| Attributes | 4 | 4 | Must be 0 | ++-------------+-------------+-------------+----------------------------+ +| Stolen time | 8 | 8 | Stolen time in unsigned | +| | | | nanoseconds indicating how | +| | | | much time this VCPU thread | +| | | | was involuntarily not | +| | | | running on a physical CPU. | ++-------------+-------------+-------------+----------------------------+ + +All values in the structure are stored little-endian. + +The structure will be updated by the hypervisor prior to scheduling a VCPU. It +will be present within a reserved region of the normal memory given to the +guest. The guest should not attempt to write into this memory. There is a +structure per VCPU of the guest. + +It is advisable that one or more 64k pages are set aside for the purpose of +these structures and not used for other purposes, this enables the guest to map +the region using 64k pages and avoids conflicting attributes with other memory. + +For the user space interface see +:ref:`Documentation/virt/kvm/devices/vcpu.rst <kvm_arm_vcpu_pvtime_ctrl>`.
\ No newline at end of file diff --git a/Documentation/virt/kvm/devices/README b/Documentation/virt/kvm/devices/README new file mode 100644 index 0000000000..34a6983412 --- /dev/null +++ b/Documentation/virt/kvm/devices/README @@ -0,0 +1 @@ +This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL. diff --git a/Documentation/virt/kvm/devices/arm-vgic-its.rst b/Documentation/virt/kvm/devices/arm-vgic-its.rst new file mode 100644 index 0000000000..e053124f77 --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic-its.rst @@ -0,0 +1,212 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================================== +ARM Virtual Interrupt Translation Service (ITS) +=============================================== + +Device types supported: + KVM_DEV_TYPE_ARM_VGIC_ITS ARM Interrupt Translation Service Controller + +The ITS allows MSI(-X) interrupts to be injected into guests. This extension is +optional. Creating a virtual ITS controller also requires a host GICv3 (see +arm-vgic-v3.txt), but does not depend on having physical ITS controllers. + +There can be multiple ITS controllers per guest, each of them has to have +a separate, non-overlapping MMIO region. + + +Groups +====== + +KVM_DEV_ARM_VGIC_GRP_ADDR +------------------------- + + Attributes: + KVM_VGIC_ITS_ADDR_TYPE (rw, 64-bit) + Base address in the guest physical address space of the GICv3 ITS + control register frame. + This address needs to be 64K aligned and the region covers 128K. + + Errors: + + ======= ================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address + -EEXIST Address already configured + -EFAULT Invalid user pointer for attr->addr. + -ENODEV Incorrect attribute or the ITS is not supported. + ======= ================================================= + + +KVM_DEV_ARM_VGIC_GRP_CTRL +------------------------- + + Attributes: + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the ITS, no additional parameter in + kvm_device_attr.addr. + + KVM_DEV_ARM_ITS_CTRL_RESET + reset the ITS, no additional parameter in kvm_device_attr.addr. + See "ITS Reset State" section. + + KVM_DEV_ARM_ITS_SAVE_TABLES + save the ITS table data into guest RAM, at the location provisioned + by the guest in corresponding registers/table entries. Should userspace + require a form of dirty tracking to identify which pages are modified + by the saving process, it should use a bitmap even if using another + mechanism to track the memory dirtied by the vCPUs. + + The layout of the tables in guest memory defines an ABI. The entries + are laid out in little endian format as described in the last paragraph. + + KVM_DEV_ARM_ITS_RESTORE_TABLES + restore the ITS tables from guest RAM to ITS internal structures. + + The GICV3 must be restored before the ITS and all ITS registers but + the GITS_CTLR must be restored before restoring the ITS tables. + + The GITS_IIDR read-only register must also be restored before + calling KVM_DEV_ARM_ITS_RESTORE_TABLES as the IIDR revision field + encodes the ABI revision. + + The expected ordering when restoring the GICv3/ITS is described in section + "ITS Restore Sequence". + + Errors: + + ======= ========================================================== + -ENXIO ITS not properly configured as required prior to setting + this attribute + -ENOMEM Memory shortage when allocating ITS internal data + -EINVAL Inconsistent restored data + -EFAULT Invalid guest ram access + -EBUSY One or more VCPUS are running + -EACCES The virtual ITS is backed by a physical GICv4 ITS, and the + state is not available without GICv4.1 + ======= ========================================================== + +KVM_DEV_ARM_VGIC_GRP_ITS_REGS +----------------------------- + + Attributes: + The attr field of kvm_device_attr encodes the offset of the + ITS register, relative to the ITS control frame base address + (ITS_base). + + kvm_device_attr.addr points to a __u64 value whatever the width + of the addressed register (32/64 bits). 64 bit registers can only + be accessed with full length. + + Writes to read-only registers are ignored by the kernel except for: + + - GITS_CREADR. It must be restored otherwise commands in the queue + will be re-executed after restoring CWRITER. GITS_CREADR must be + restored before restoring the GITS_CTLR which is likely to enable the + ITS. Also it must be restored after GITS_CBASER since a write to + GITS_CBASER resets GITS_CREADR. + - GITS_IIDR. The Revision field encodes the table layout ABI revision. + In the future we might implement direct injection of virtual LPIs. + This will require an upgrade of the table layout and an evolution of + the ABI. GITS_IIDR must be restored before calling + KVM_DEV_ARM_ITS_RESTORE_TABLES. + + For other registers, getting or setting a register has the same + effect as reading/writing the register on real hardware. + + Errors: + + ======= ==================================================== + -ENXIO Offset does not correspond to any supported register + -EFAULT Invalid user pointer for attr->addr + -EINVAL Offset is not 64-bit aligned + -EBUSY one or more VCPUS are running + ======= ==================================================== + +ITS Restore Sequence: +--------------------- + +The following ordering must be followed when restoring the GIC and the ITS: + +a) restore all guest memory and create vcpus +b) restore all redistributors +c) provide the ITS base address + (KVM_DEV_ARM_VGIC_GRP_ADDR) +d) restore the ITS in the following order: + + 1. Restore GITS_CBASER + 2. Restore all other ``GITS_`` registers, except GITS_CTLR! + 3. Load the ITS table data (KVM_DEV_ARM_ITS_RESTORE_TABLES) + 4. Restore GITS_CTLR + +Then vcpus can be started. + +ITS Table ABI REV0: +------------------- + + Revision 0 of the ABI only supports the features of a virtual GICv3, and does + not support a virtual GICv4 with support for direct injection of virtual + interrupts for nested hypervisors. + + The device table and ITT are indexed by the DeviceID and EventID, + respectively. The collection table is not indexed by CollectionID, and the + entries in the collection are listed in no particular order. + All entries are 8 bytes. + + Device Table Entry (DTE):: + + bits: | 63| 62 ... 49 | 48 ... 5 | 4 ... 0 | + values: | V | next | ITT_addr | Size | + + where: + + - V indicates whether the entry is valid. If not, other fields + are not meaningful. + - next: equals to 0 if this entry is the last one; otherwise it + corresponds to the DeviceID offset to the next DTE, capped by + 2^14 -1. + - ITT_addr matches bits [51:8] of the ITT address (256 Byte aligned). + - Size specifies the supported number of bits for the EventID, + minus one + + Collection Table Entry (CTE):: + + bits: | 63| 62 .. 52 | 51 ... 16 | 15 ... 0 | + values: | V | RES0 | RDBase | ICID | + + where: + + - V indicates whether the entry is valid. If not, other fields are + not meaningful. + - RES0: reserved field with Should-Be-Zero-or-Preserved behavior. + - RDBase is the PE number (GICR_TYPER.Processor_Number semantic), + - ICID is the collection ID + + Interrupt Translation Entry (ITE):: + + bits: | 63 ... 48 | 47 ... 16 | 15 ... 0 | + values: | next | pINTID | ICID | + + where: + + - next: equals to 0 if this entry is the last one; otherwise it corresponds + to the EventID offset to the next ITE capped by 2^16 -1. + - pINTID is the physical LPI ID; if zero, it means the entry is not valid + and other fields are not meaningful. + - ICID is the collection ID + +ITS Reset State: +---------------- + +RESET returns the ITS to the same state that it was when first created and +initialized. When the RESET command returns, the following things are +guaranteed: + +- The ITS is not enabled and quiescent + GITS_CTLR.Enabled = 0 .Quiescent=1 +- There is no internally cached state +- No collection or device table are used + GITS_BASER<n>.Valid = 0 +- GITS_CBASER = 0, GITS_CREADR = 0, GITS_CWRITER = 0 +- The ABI version is unchanged and remains the one set when the ITS + device was first created. diff --git a/Documentation/virt/kvm/devices/arm-vgic-v3.rst b/Documentation/virt/kvm/devices/arm-vgic-v3.rst new file mode 100644 index 0000000000..51e5e57625 --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic-v3.rst @@ -0,0 +1,291 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================== +ARM Virtual Generic Interrupt Controller v3 and later (VGICv3) +============================================================== + + +Device types supported: + - KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0 + +Only one VGIC instance may be instantiated through this API. The created VGIC +will act as the VM interrupt controller, requiring emulated user-space devices +to inject interrupts to the VGIC instead of directly to CPUs. It is not +possible to create both a GICv3 and GICv2 on the same VM. + +Creating a guest GICv3 device requires a host GICv3 as well. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + + KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 distributor + register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned and the region covers 64 KByte. + + KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit) + Base address in the guest physical address space of the GICv3 + redistributor register mappings. There are two 64K pages for each + VCPU and all of the redistributor pages are contiguous. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + This address needs to be 64K aligned. + + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION (rw, 64-bit) + The attribute data pointed to by kvm_device_attr.addr is a __u64 value:: + + bits: | 63 .... 52 | 51 .... 16 | 15 - 12 |11 - 0 + values: | count | base | flags | index + + - index encodes the unique redistributor region index + - flags: reserved for future use, currently 0 + - base field encodes bits [51:16] of the guest physical base address + of the first redistributor in the region. + - count encodes the number of redistributors in the region. Must be + greater than 0. + + There are two 64K pages for each redistributor in the region and + redistributors are laid out contiguously within the region. Regions + are filled with redistributors in the index order. The sum of all + region count fields must be greater than or equal to the number of + VCPUs. Redistributor regions must be registered in the incremental + index order, starting from index 0. + + The characteristics of a specific redistributor region can be read + by presetting the index field in the attr data. + Only valid for KVM_DEV_TYPE_ARM_VGIC_V3. + + It is invalid to mix calls with KVM_VGIC_V3_ADDR_TYPE_REDIST and + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attributes. + + Errors: + + ======= ============================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address, bad redistributor region + count/index, mixed redistributor region attribute usage + -EEXIST Address already configured + -ENOENT Attempt to read the characteristics of a non existing + redistributor region + -ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT Invalid user pointer for attr->addr. + ======= ============================================================= + + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS, KVM_DEV_ARM_VGIC_GRP_REDIST_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 32 | 31 .... 0 | + values: | mpidr | offset | + + All distributor regs are (rw, 32-bit) and kvm_device_attr.addr points to a + __u32 value. 64-bit registers must be accessed by separately accessing the + lower and higher word. + + Writes to read-only registers are ignored by the kernel. + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS accesses the main distributor registers. + KVM_DEV_ARM_VGIC_GRP_REDIST_REGS accesses the redistributor of the CPU + specified by the mpidr. + + The offset is relative to the "[Re]Distributor base address" as defined + in the GICv3/4 specs. Getting or setting such a register has the same + effect as reading or writing the register on real hardware, except for the + following registers: GICD_STATUSR, GICR_STATUSR, GICD_ISPENDR, + GICR_ISPENDR0, GICD_ICPENDR, and GICR_ICPENDR0. These registers behave + differently when accessed via this interface compared to their + architecturally defined behavior to allow software a full view of the + VGIC's internal state. + + The mpidr field is used to specify which + redistributor is accessed. The mpidr is ignored for the distributor. + + The mpidr encoding is based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Note that distributor fields are not banked, but return the same value + regardless of the mpidr used to access the register. + + GICD_IIDR.Revision is updated when the KVM implementation is changed in a + way directly observable by the guest or userspace. Userspace should read + GICD_IIDR from KVM and write back the read value to confirm its expected + behavior is aligned with the KVM implementation. Userspace should set + GICD_IIDR before setting any other registers to ensure the expected + behavior. + + + The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such + that a write of a clear bit has no effect, whereas a write with a set bit + clears that value. To allow userspace to freely set the values of these two + registers, setting the attributes with the register offsets for these two + registers simply sets the non-reserved bits to the value written. + + + Accesses (reads and writes) to the GICD_ISPENDR register region and + GICR_ISPENDR0 registers get/set the value of the latched pending state for + the interrupts. + + This is identical to the value returned by a guest read from ISPENDR for an + edge triggered interrupt, but may differ for level triggered interrupts. + For edge triggered interrupts, once an interrupt becomes pending (whether + because of an edge detected on the input line or because of a guest write + to ISPENDR) this state is "latched", and only cleared when either the + interrupt is activated or when the guest writes to ICPENDR. A level + triggered interrupt may be pending either because the level input is held + high by a device, or because of a guest write to the ISPENDR register. Only + ISPENDR writes are latched; if the device lowers the line level then the + interrupt is no longer pending unless the guest also wrote to ISPENDR, and + conversely writes to ICPENDR or activations of the interrupt do not clear + the pending status if the line level is still being held high. (These + rules are documented in the GICv3 specification descriptions of the ICPENDR + and ISPENDR registers.) For a level triggered interrupt the value accessed + here is that of the latch which is set by ISPENDR and cleared by ICPENDR or + interrupt activation, whereas the value returned by a guest read from + ISPENDR is the logical OR of the latch value and the input line level. + + Raw access to the latch state is provided to userspace so that it can save + and restore the entire GIC internal state (which is defined by the + combination of the current input line level and the latch state, and cannot + be deduced from purely the line level and the value of the ISPENDR + registers). + + Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers have + RAZ/WI semantics, meaning that reads always return 0 and writes are always + ignored. + + Errors: + + ====== ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + ====== ===================================================== + + + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 | + values: | mpidr | RES | instr | + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + The instr field encodes the system register to access based on the fields + defined in the A64 instruction set encoding for system register access + (RES means the bits are reserved for future use and should be zero):: + + | 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 | + | Op 0 | Op1 | CRn | CRm | Op2 | + + All system regs accessed through this API are (rw, 64-bit) and + kvm_device_attr.addr points to a __u64 value. + + KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS accesses the CPU interface registers for the + CPU specified by the mpidr field. + + CPU interface registers access is not implemented for AArch32 mode. + Error -ENXIO is returned when accessed in AArch32 mode. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY VCPU is running + -EINVAL Invalid mpidr or register value supplied + ======= ===================================================== + + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + kvm_device_attr.addr points to a __u32 value. + + Errors: + + ======= ====================================== + -EINVAL Value set is out of the expected range + -EBUSY Value has already be set. + ======= ====================================== + + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the VGIC, no additional parameter in + kvm_device_attr.addr. Must be called after all VCPUs have been created. + KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES + save all LPI pending bits into guest RAM pending tables. + + The first kB of the pending table is not altered by this operation. + + Errors: + + ======= ======================================================== + -ENXIO VGIC not properly configured as required prior to calling + this attribute + -ENODEV no online VCPU + -ENOMEM memory shortage when allocating vgic internal data + -EFAULT Invalid guest ram access + -EBUSY One or more VCPUS are running + ======= ======================================================== + + + KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO + Attributes: + + The attr field of kvm_device_attr encodes the following values:: + + bits: | 63 .... 32 | 31 .... 10 | 9 .... 0 | + values: | mpidr | info | vINTID | + + The vINTID specifies which set of IRQs is reported on. + + The info field specifies which information userspace wants to get or set + using this interface. Currently we support the following info values: + + VGIC_LEVEL_INFO_LINE_LEVEL: + Get/Set the input level of the IRQ line for a set of 32 contiguously + numbered interrupts. + + vINTID must be a multiple of 32. + + kvm_device_attr.addr points to a __u32 value which will contain a + bitmap where a set bit means the interrupt level is asserted. + + Bit[n] indicates the status for interrupt vINTID + n. + + SGIs and any interrupt with a higher ID than the number of interrupts + supported, will be RAZ/WI. LPIs are always edge-triggered and are + therefore not supported by this interface. + + PPIs are reported per VCPU as specified in the mpidr field, and SPIs are + reported with the same value regardless of the mpidr specified. + + The mpidr field encodes the CPU ID based on the affinity information in the + architecture defined MPIDR, and the field is encoded as follows:: + + | 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 | + | Aff3 | Aff2 | Aff1 | Aff0 | + + Errors: + + ======= ============================================= + -EINVAL vINTID is not multiple of 32 or info field is + not VGIC_LEVEL_INFO_LINE_LEVEL + ======= ============================================= diff --git a/Documentation/virt/kvm/devices/arm-vgic.rst b/Documentation/virt/kvm/devices/arm-vgic.rst new file mode 100644 index 0000000000..40bdeea1d8 --- /dev/null +++ b/Documentation/virt/kvm/devices/arm-vgic.rst @@ -0,0 +1,156 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================================== +ARM Virtual Generic Interrupt Controller v2 (VGIC) +================================================== + +Device types supported: + + - KVM_DEV_TYPE_ARM_VGIC_V2 ARM Generic Interrupt Controller v2.0 + +Only one VGIC instance may be instantiated through either this API or the +legacy KVM_CREATE_IRQCHIP API. The created VGIC will act as the VM interrupt +controller, requiring emulated user-space devices to inject interrupts to the +VGIC instead of directly to CPUs. + +GICv3 implementations with hardware compatibility support allow creating a +guest GICv2 through this interface. For information on creating a guest GICv3 +device and guest ITS devices, see arm-vgic-v3.txt. It is not possible to +create both a GICv3 and GICv2 device on the same VM. + + +Groups: + KVM_DEV_ARM_VGIC_GRP_ADDR + Attributes: + + KVM_VGIC_V2_ADDR_TYPE_DIST (rw, 64-bit) + Base address in the guest physical address space of the GIC distributor + register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2. + This address needs to be 4K aligned and the region covers 4 KByte. + + KVM_VGIC_V2_ADDR_TYPE_CPU (rw, 64-bit) + Base address in the guest physical address space of the GIC virtual cpu + interface register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V2. + This address needs to be 4K aligned and the region covers 4 KByte. + + Errors: + + ======= ============================================================= + -E2BIG Address outside of addressable IPA range + -EINVAL Incorrectly aligned address + -EEXIST Address already configured + -ENXIO The group or attribute is unknown/unsupported for this device + or hardware support is missing. + -EFAULT Invalid user pointer for attr->addr. + ======= ============================================================= + + KVM_DEV_ARM_VGIC_GRP_DIST_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 | + values: | reserved | vcpu_index | offset | + + All distributor regs are (rw, 32-bit) + + The offset is relative to the "Distributor base address" as defined in the + GICv2 specs. Getting or setting such a register has the same effect as + reading or writing the register on the actual hardware from the cpu whose + index is specified with the vcpu_index field. Note that most distributor + fields are not banked, but return the same value regardless of the + vcpu_index used to access the register. + + GICD_IIDR.Revision is updated when the KVM implementation of an emulated + GICv2 is changed in a way directly observable by the guest or userspace. + Userspace should read GICD_IIDR from KVM and write back the read value to + confirm its expected behavior is aligned with the KVM implementation. + Userspace should set GICD_IIDR before setting any other registers (both + KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS) to ensure + the expected behavior. Unless GICD_IIDR has been set from userspace, writes + to the interrupt group registers (GICD_IGROUPR) are ignored. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + -EINVAL Invalid vcpu_index supplied + ======= ===================================================== + + KVM_DEV_ARM_VGIC_GRP_CPU_REGS + Attributes: + + The attr field of kvm_device_attr encodes two values:: + + bits: | 63 .... 40 | 39 .. 32 | 31 .... 0 | + values: | reserved | vcpu_index | offset | + + All CPU interface regs are (rw, 32-bit) + + The offset specifies the offset from the "CPU interface base address" as + defined in the GICv2 specs. Getting or setting such a register has the + same effect as reading or writing the register on the actual hardware. + + The Active Priorities Registers APRn are implementation defined, so we set a + fixed format for our implementation that fits with the model of a "GICv2 + implementation without the security extensions" which we present to the + guest. This interface always exposes four register APR[0-3] describing the + maximum possible 128 preemption levels. The semantics of the register + indicate if any interrupts in a given preemption level are in the active + state by setting the corresponding bit. + + Thus, preemption level X has one or more active interrupts if and only if: + + APRn[X mod 32] == 0b1, where n = X / 32 + + Bits for undefined preemption levels are RAZ/WI. + + Note that this differs from a CPU's view of the APRs on hardware in which + a GIC without the security extensions expose group 0 and group 1 active + priorities in separate register groups, whereas we show a combined view + similar to GICv2's GICH_APR. + + For historical reasons and to provide ABI compatibility with userspace we + export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask + field in the lower 5 bits of a word, meaning that userspace must always + use the lower 5 bits to communicate with the KVM device and must shift the + value left by 3 places to obtain the actual priority mask level. + + Errors: + + ======= ===================================================== + -ENXIO Getting or setting this register is not yet supported + -EBUSY One or more VCPUs are running + -EINVAL Invalid vcpu_index supplied + ======= ===================================================== + + KVM_DEV_ARM_VGIC_GRP_NR_IRQS + Attributes: + + A value describing the number of interrupts (SGI, PPI and SPI) for + this GIC instance, ranging from 64 to 1024, in increments of 32. + + Errors: + + ======= ============================================================= + -EINVAL Value set is out of the expected range + -EBUSY Value has already be set, or GIC has already been initialized + with default values. + ======= ============================================================= + + KVM_DEV_ARM_VGIC_GRP_CTRL + Attributes: + + KVM_DEV_ARM_VGIC_CTRL_INIT + request the initialization of the VGIC or ITS, no additional parameter + in kvm_device_attr.addr. + + Errors: + + ======= ========================================================= + -ENXIO VGIC not properly configured as required prior to calling + this attribute + -ENODEV no online VCPU + -ENOMEM memory shortage when allocating vgic internal data + ======= ========================================================= diff --git a/Documentation/virt/kvm/devices/index.rst b/Documentation/virt/kvm/devices/index.rst new file mode 100644 index 0000000000..192cda7405 --- /dev/null +++ b/Documentation/virt/kvm/devices/index.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======= +Devices +======= + +.. toctree:: + :maxdepth: 2 + + arm-vgic-its + arm-vgic + arm-vgic-v3 + mpic + s390_flic + vcpu + vfio + vm + xics + xive diff --git a/Documentation/virt/kvm/devices/mpic.rst b/Documentation/virt/kvm/devices/mpic.rst new file mode 100644 index 0000000000..55cefe030d --- /dev/null +++ b/Documentation/virt/kvm/devices/mpic.rst @@ -0,0 +1,58 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +MPIC interrupt controller +========================= + +Device types supported: + + - KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0 + - KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2 + +Only one MPIC instance, of any type, may be instantiated. The created +MPIC will act as the system interrupt controller, connecting to each +vcpu's interrupt inputs. + +Groups: + KVM_DEV_MPIC_GRP_MISC + Attributes: + + KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit) + Base address of the 256 KiB MPIC register space. Must be + naturally aligned. A value of zero disables the mapping. + Reset value is zero. + + KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit) + Access an MPIC register, as if the access were made from the guest. + "attr" is the byte offset into the MPIC register space. Accesses + must be 4-byte aligned. + + MSIs may be signaled by using this attribute group to write + to the relevant MSIIR. + + KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit) + IRQ input line for each standard openpic source. 0 is inactive and 1 + is active, regardless of interrupt sense. + + For edge-triggered interrupts: Writing 1 is considered an activating + edge, and writing 0 is ignored. Reading returns 1 if a previously + signaled edge has not been acknowledged, and 0 otherwise. + + "attr" is the IRQ number. IRQ numbers for standard sources are the + byte offset of the relevant IVPR from EIVPR0, divided by 32. + +IRQ Routing: + + The MPIC emulation supports IRQ routing. Only a single MPIC device can + be instantiated. Once that device has been created, it's available as + irqchip id 0. + + This irqchip 0 has 256 interrupt pins, which expose the interrupts in + the main array of interrupt sources (a.k.a. "SRC" interrupts). + + The numbering is the same as the MPIC device tree binding -- based on + the register offset from the beginning of the sources array, without + regard to any subdivisions in chip documentation such as "internal" + or "external" interrupts. + + Access to non-SRC interrupts is not implemented through IRQ routing mechanisms. diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst new file mode 100644 index 0000000000..ea96559ba5 --- /dev/null +++ b/Documentation/virt/kvm/devices/s390_flic.rst @@ -0,0 +1,166 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================== +FLIC (floating interrupt controller) +==================================== + +FLIC handles floating (non per-cpu) interrupts, i.e. I/O, service and some +machine check interruptions. All interrupts are stored in a per-vm list of +pending interrupts. FLIC performs operations on this list. + +Only one FLIC instance may be instantiated. + +FLIC provides support to +- add interrupts (KVM_DEV_FLIC_ENQUEUE) +- inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS) +- purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS) +- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ) +- enable/disable for the guest transparent async page faults +- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*) +- modify AIS (adapter-interruption-suppression) mode state (KVM_DEV_FLIC_AISM) +- inject adapter interrupts on a specified adapter (KVM_DEV_FLIC_AIRQ_INJECT) +- get/set all AIS mode states (KVM_DEV_FLIC_AISM_ALL) + +Groups: + KVM_DEV_FLIC_ENQUEUE + Passes a buffer and length into the kernel which are then injected into + the list of pending interrupts. + attr->addr contains the pointer to the buffer and attr->attr contains + the length of the buffer. + The format of the data structure kvm_s390_irq as it is copied from userspace + is defined in usr/include/linux/kvm.h. + + KVM_DEV_FLIC_GET_ALL_IRQS + Copies all floating interrupts into a buffer provided by userspace. + When the buffer is too small it returns -ENOMEM, which is the indication + for userspace to try again with a bigger buffer. + + -ENOBUFS is returned when the allocation of a kernelspace buffer has + failed. + + -EFAULT is returned when copying data to userspace failed. + All interrupts remain pending, i.e. are not deleted from the list of + currently pending interrupts. + attr->addr contains the userspace address of the buffer into which all + interrupt data will be copied. + attr->attr contains the size of the buffer in bytes. + + KVM_DEV_FLIC_CLEAR_IRQS + Simply deletes all elements from the list of currently pending floating + interrupts. No interrupts are injected into the guest. + + KVM_DEV_FLIC_CLEAR_IO_IRQ + Deletes one (if any) I/O interrupt for a subchannel identified by the + subsystem identification word passed via the buffer specified by + attr->addr (address) and attr->attr (length). + + KVM_DEV_FLIC_APF_ENABLE + Enables async page faults for the guest. So in case of a major page fault + the host is allowed to handle this async and continues the guest. + + KVM_DEV_FLIC_APF_DISABLE_WAIT + Disables async page faults for the guest and waits until already pending + async page faults are done. This is necessary to trigger a completion interrupt + for every init interrupt before migrating the interrupt list. + + KVM_DEV_FLIC_ADAPTER_REGISTER + Register an I/O adapter interrupt source. Takes a kvm_s390_io_adapter + describing the adapter to register:: + + struct kvm_s390_io_adapter { + __u32 id; + __u8 isc; + __u8 maskable; + __u8 swap; + __u8 flags; + }; + + id contains the unique id for the adapter, isc the I/O interruption subclass + to use, maskable whether this adapter may be masked (interrupts turned off), + swap whether the indicators need to be byte swapped, and flags contains + further characteristics of the adapter. + + Currently defined values for 'flags' are: + + - KVM_S390_ADAPTER_SUPPRESSIBLE: adapter is subject to AIS + (adapter-interrupt-suppression) facility. This flag only has an effect if + the AIS capability is enabled. + + Unknown flag values are ignored. + + + KVM_DEV_FLIC_ADAPTER_MODIFY + Modifies attributes of an existing I/O adapter interrupt source. Takes + a kvm_s390_io_adapter_req specifying the adapter and the operation:: + + struct kvm_s390_io_adapter_req { + __u32 id; + __u8 type; + __u8 mask; + __u16 pad0; + __u64 addr; + }; + + id specifies the adapter and type the operation. The supported operations + are: + + KVM_S390_IO_ADAPTER_MASK + mask or unmask the adapter, as specified in mask + + KVM_S390_IO_ADAPTER_MAP + This is now a no-op. The mapping is purely done by the irq route. + KVM_S390_IO_ADAPTER_UNMAP + This is now a no-op. The mapping is purely done by the irq route. + + KVM_DEV_FLIC_AISM + modify the adapter-interruption-suppression mode for a given isc if the + AIS capability is enabled. Takes a kvm_s390_ais_req describing:: + + struct kvm_s390_ais_req { + __u8 isc; + __u16 mode; + }; + + isc contains the target I/O interruption subclass, mode the target + adapter-interruption-suppression mode. The following modes are + currently supported: + + - KVM_S390_AIS_MODE_ALL: ALL-Interruptions Mode, i.e. airq injection + is always allowed; + - KVM_S390_AIS_MODE_SINGLE: SINGLE-Interruption Mode, i.e. airq + injection is only allowed once and the following adapter interrupts + will be suppressed until the mode is set again to ALL-Interruptions + or SINGLE-Interruption mode. + + KVM_DEV_FLIC_AIRQ_INJECT + Inject adapter interrupts on a specified adapter. + attr->attr contains the unique id for the adapter, which allows for + adapter-specific checks and actions. + For adapters subject to AIS, handle the airq injection suppression for + an isc according to the adapter-interruption-suppression mode on condition + that the AIS capability is enabled. + + KVM_DEV_FLIC_AISM_ALL + Gets or sets the adapter-interruption-suppression mode for all ISCs. Takes + a kvm_s390_ais_all describing:: + + struct kvm_s390_ais_all { + __u8 simm; /* Single-Interruption-Mode mask */ + __u8 nimm; /* No-Interruption-Mode mask * + }; + + simm contains Single-Interruption-Mode mask for all ISCs, nimm contains + No-Interruption-Mode mask for all ISCs. Each bit in simm and nimm corresponds + to an ISC (MSB0 bit 0 to ISC 0 and so on). The combination of simm bit and + nimm bit presents AIS mode for a ISC. + + KVM_DEV_FLIC_AISM_ALL is indicated by KVM_CAP_S390_AIS_MIGRATION. + +Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on +FLIC with an unknown group or attribute gives the error code EINVAL (instead of +ENXIO, as specified in the API documentation). It is not possible to conclude +that a FLIC operation is unavailable based on the error code resulting from a +usage attempt. + +.. note:: The KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl will return EINVAL in case a + zero schid is specified. diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst new file mode 100644 index 0000000000..31f14ec4a6 --- /dev/null +++ b/Documentation/virt/kvm/devices/vcpu.rst @@ -0,0 +1,267 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Generic vcpu interface +====================== + +The virtual cpu "device" also accepts the ioctls KVM_SET_DEVICE_ATTR, +KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same struct +kvm_device_attr as other devices, but targets VCPU-wide settings and controls. + +The groups and attributes per virtual cpu, if any, are architecture specific. + +1. GROUP: KVM_ARM_VCPU_PMU_V3_CTRL +================================== + +:Architectures: ARM64 + +1.1. ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_IRQ +--------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for PMU overflow interrupt is a + pointer to an int + +Returns: + + ======= ======================================================== + -EBUSY The PMU overflow interrupt is already set + -EFAULT Error reading interrupt number + -ENXIO PMUv3 not supported or the overflow interrupt not set + when attempting to get it + -ENODEV KVM_ARM_VCPU_PMU_V3 feature missing from VCPU + -EINVAL Invalid PMU overflow interrupt number supplied or + trying to set the IRQ number without using an in-kernel + irqchip. + ======= ======================================================== + +A value describing the PMUv3 (Performance Monitor Unit v3) overflow interrupt +number for this vcpu. This interrupt could be a PPI or SPI, but the interrupt +type must be same for each vcpu. As a PPI, the interrupt number is the same for +all vcpus, while as an SPI it must be a separate number per vcpu. + +1.2 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_INIT +--------------------------------------- + +:Parameters: no additional parameter in kvm_device_attr.addr + +Returns: + + ======= ====================================================== + -EEXIST Interrupt number already used + -ENODEV PMUv3 not supported or GIC not initialized + -ENXIO PMUv3 not supported, missing VCPU feature or interrupt + number not set + -EBUSY PMUv3 already initialized + ======= ====================================================== + +Request the initialization of the PMUv3. If using the PMUv3 with an in-kernel +virtual GIC implementation, this must be done after initializing the in-kernel +irqchip. + +1.3 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_FILTER +----------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for a PMU event filter is a + pointer to a struct kvm_pmu_event_filter + +:Returns: + + ======= ====================================================== + -ENODEV PMUv3 not supported or GIC not initialized + -ENXIO PMUv3 not properly configured or in-kernel irqchip not + configured as required prior to calling this attribute + -EBUSY PMUv3 already initialized or a VCPU has already run + -EINVAL Invalid filter range + ======= ====================================================== + +Request the installation of a PMU event filter described as follows:: + + struct kvm_pmu_event_filter { + __u16 base_event; + __u16 nevents; + + #define KVM_PMU_EVENT_ALLOW 0 + #define KVM_PMU_EVENT_DENY 1 + + __u8 action; + __u8 pad[3]; + }; + +A filter range is defined as the range [@base_event, @base_event + @nevents), +together with an @action (KVM_PMU_EVENT_ALLOW or KVM_PMU_EVENT_DENY). The +first registered range defines the global policy (global ALLOW if the first +@action is DENY, global DENY if the first @action is ALLOW). Multiple ranges +can be programmed, and must fit within the event space defined by the PMU +architecture (10 bits on ARMv8.0, 16 bits from ARMv8.1 onwards). + +Note: "Cancelling" a filter by registering the opposite action for the same +range doesn't change the default action. For example, installing an ALLOW +filter for event range [0:10) as the first filter and then applying a DENY +action for the same range will leave the whole range as disabled. + +Restrictions: Event 0 (SW_INCR) is never filtered, as it doesn't count a +hardware event. Filtering event 0x1E (CHAIN) has no effect either, as it +isn't strictly speaking an event. Filtering the cycle counter is possible +using event 0x11 (CPU_CYCLES). + +1.4 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_SET_PMU +------------------------------------------ + +:Parameters: in kvm_device_attr.addr the address to an int representing the PMU + identifier. + +:Returns: + + ======= ==================================================== + -EBUSY PMUv3 already initialized, a VCPU has already run or + an event filter has already been set + -EFAULT Error accessing the PMU identifier + -ENXIO PMU not found + -ENODEV PMUv3 not supported or GIC not initialized + -ENOMEM Could not allocate memory + ======= ==================================================== + +Request that the VCPU uses the specified hardware PMU when creating guest events +for the purpose of PMU emulation. The PMU identifier can be read from the "type" +file for the desired PMU instance under /sys/devices (or, equivalent, +/sys/bus/even_source). This attribute is particularly useful on heterogeneous +systems where there are at least two CPU PMUs on the system. The PMU that is set +for one VCPU will be used by all the other VCPUs. It isn't possible to set a PMU +if a PMU event filter is already present. + +Note that KVM will not make any attempts to run the VCPU on the physical CPUs +associated with the PMU specified by this attribute. This is entirely left to +userspace. However, attempting to run the VCPU on a physical CPU not supported +by the PMU will fail and KVM_RUN will return with +exit_reason = KVM_EXIT_FAIL_ENTRY and populate the fail_entry struct by setting +hardare_entry_failure_reason field to KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED and +the cpu field to the processor id. + +2. GROUP: KVM_ARM_VCPU_TIMER_CTRL +================================= + +:Architectures: ARM64 + +2.1. ATTRIBUTES: KVM_ARM_VCPU_TIMER_IRQ_VTIMER, KVM_ARM_VCPU_TIMER_IRQ_PTIMER +----------------------------------------------------------------------------- + +:Parameters: in kvm_device_attr.addr the address for the timer interrupt is a + pointer to an int + +Returns: + + ======= ================================= + -EINVAL Invalid timer interrupt number + -EBUSY One or more VCPUs has already run + ======= ================================= + +A value describing the architected timer interrupt number when connected to an +in-kernel virtual GIC. These must be a PPI (16 <= intid < 32). Setting the +attribute overrides the default values (see below). + +============================= ========================================== +KVM_ARM_VCPU_TIMER_IRQ_VTIMER The EL1 virtual timer intid (default: 27) +KVM_ARM_VCPU_TIMER_IRQ_PTIMER The EL1 physical timer intid (default: 30) +============================= ========================================== + +Setting the same PPI for different timers will prevent the VCPUs from running. +Setting the interrupt number on a VCPU configures all VCPUs created at that +time to use the number provided for a given timer, overwriting any previously +configured values on other VCPUs. Userspace should configure the interrupt +numbers on at least one VCPU after creating all VCPUs and before running any +VCPUs. + +.. _kvm_arm_vcpu_pvtime_ctrl: + +3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL +================================== + +:Architectures: ARM64 + +3.1 ATTRIBUTE: KVM_ARM_VCPU_PVTIME_IPA +-------------------------------------- + +:Parameters: 64-bit base address + +Returns: + + ======= ====================================== + -ENXIO Stolen time not implemented + -EEXIST Base address already set for this VCPU + -EINVAL Base address not 64 byte aligned + ======= ====================================== + +Specifies the base address of the stolen time structure for this VCPU. The +base address must be 64 byte aligned and exist within a valid guest memory +region. See Documentation/virt/kvm/arm/pvtime.rst for more information +including the layout of the stolen time structure. + +4. GROUP: KVM_VCPU_TSC_CTRL +=========================== + +:Architectures: x86 + +4.1 ATTRIBUTE: KVM_VCPU_TSC_OFFSET + +:Parameters: 64-bit unsigned TSC offset + +Returns: + + ======= ====================================== + -EFAULT Error reading/writing the provided + parameter address. + -ENXIO Attribute not supported + ======= ====================================== + +Specifies the guest's TSC offset relative to the host's TSC. The guest's +TSC is then derived by the following equation: + + guest_tsc = host_tsc + KVM_VCPU_TSC_OFFSET + +This attribute is useful to adjust the guest's TSC on live migration, +so that the TSC counts the time during which the VM was paused. The +following describes a possible algorithm to use for this purpose. + +From the source VMM process: + +1. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (tsc_src), + kvmclock nanoseconds (guest_src), and host CLOCK_REALTIME nanoseconds + (host_src). + +2. Read the KVM_VCPU_TSC_OFFSET attribute for every vCPU to record the + guest TSC offset (ofs_src[i]). + +3. Invoke the KVM_GET_TSC_KHZ ioctl to record the frequency of the + guest's TSC (freq). + +From the destination VMM process: + +4. Invoke the KVM_SET_CLOCK ioctl, providing the source nanoseconds from + kvmclock (guest_src) and CLOCK_REALTIME (host_src) in their respective + fields. Ensure that the KVM_CLOCK_REALTIME flag is set in the provided + structure. + + KVM will advance the VM's kvmclock to account for elapsed time since + recording the clock values. Note that this will cause problems in + the guest (e.g., timeouts) unless CLOCK_REALTIME is synchronized + between the source and destination, and a reasonably short time passes + between the source pausing the VMs and the destination executing + steps 4-7. + +5. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (tsc_dest) and + kvmclock nanoseconds (guest_dest). + +6. Adjust the guest TSC offsets for every vCPU to account for (1) time + elapsed since recording state and (2) difference in TSCs between the + source and destination machine: + + ofs_dst[i] = ofs_src[i] - + (guest_src - guest_dest) * freq + + (tsc_src - tsc_dest) + + ("ofs[i] + tsc - guest * freq" is the guest TSC value corresponding to + a time of 0 in kvmclock. The above formula ensures that it is the + same on the destination as it was on the source). + +7. Write the KVM_VCPU_TSC_OFFSET attribute for every vCPU with the + respective value derived in the previous step. diff --git a/Documentation/virt/kvm/devices/vfio.rst b/Documentation/virt/kvm/devices/vfio.rst new file mode 100644 index 0000000000..c549143bb8 --- /dev/null +++ b/Documentation/virt/kvm/devices/vfio.rst @@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +VFIO virtual device +=================== + +Device types supported: + + - KVM_DEV_TYPE_VFIO + +Only one VFIO instance may be created per VM. The created device +tracks VFIO files (group or device) in use by the VM and features +of those groups/devices important to the correctness and acceleration +of the VM. As groups/devices are enabled and disabled for use by the +VM, KVM should be updated about their presence. When registered with +KVM, a reference to the VFIO file is held by KVM. + +Groups: + KVM_DEV_VFIO_FILE + alias: KVM_DEV_VFIO_GROUP + +KVM_DEV_VFIO_FILE attributes: + KVM_DEV_VFIO_FILE_ADD: Add a VFIO file (group/device) to VFIO-KVM device + tracking + + kvm_device_attr.addr points to an int32_t file descriptor for the + VFIO file. + + KVM_DEV_VFIO_FILE_DEL: Remove a VFIO file (group/device) from VFIO-KVM + device tracking + + kvm_device_attr.addr points to an int32_t file descriptor for the + VFIO file. + +KVM_DEV_VFIO_GROUP (legacy kvm device group restricted to the handling of VFIO group fd): + KVM_DEV_VFIO_GROUP_ADD: same as KVM_DEV_VFIO_FILE_ADD for group fd only + + KVM_DEV_VFIO_GROUP_DEL: same as KVM_DEV_VFIO_FILE_DEL for group fd only + + KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE: attaches a guest visible TCE table + allocated by sPAPR KVM. + kvm_device_attr.addr points to a struct:: + + struct kvm_vfio_spapr_tce { + __s32 groupfd; + __s32 tablefd; + }; + + where: + + - @groupfd is a file descriptor for a VFIO group; + - @tablefd is a file descriptor for a TCE table allocated via + KVM_CREATE_SPAPR_TCE. + +The FILE/GROUP_ADD operation above should be invoked prior to accessing the +device file descriptor via VFIO_GROUP_GET_DEVICE_FD in order to support +drivers which require a kvm pointer to be set in their .open_device() +callback. It is the same for device file descriptor via character device +open which gets device access via VFIO_DEVICE_BIND_IOMMUFD. For such file +descriptors, FILE_ADD should be invoked before VFIO_DEVICE_BIND_IOMMUFD +to support the drivers mentioned in prior sentence as well. diff --git a/Documentation/virt/kvm/devices/vm.rst b/Documentation/virt/kvm/devices/vm.rst new file mode 100644 index 0000000000..a4d39fa1b0 --- /dev/null +++ b/Documentation/virt/kvm/devices/vm.rst @@ -0,0 +1,402 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Generic vm interface +==================== + +The virtual machine "device" also accepts the ioctls KVM_SET_DEVICE_ATTR, +KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same +struct kvm_device_attr as other devices, but targets VM-wide settings +and controls. + +The groups and attributes per virtual machine, if any, are architecture +specific. + +1. GROUP: KVM_S390_VM_MEM_CTRL +============================== + +:Architectures: s390 + +1.1. ATTRIBUTE: KVM_S390_VM_MEM_ENABLE_CMMA +------------------------------------------- + +:Parameters: none +:Returns: -EBUSY if a vcpu is already defined, otherwise 0 + +Enables Collaborative Memory Management Assist (CMMA) for the virtual machine. + +1.2. ATTRIBUTE: KVM_S390_VM_MEM_CLR_CMMA +---------------------------------------- + +:Parameters: none +:Returns: -EINVAL if CMMA was not enabled; + 0 otherwise + +Clear the CMMA status for all guest pages, so any pages the guest marked +as unused are again used any may not be reclaimed by the host. + +1.3. ATTRIBUTE KVM_S390_VM_MEM_LIMIT_SIZE +----------------------------------------- + +:Parameters: in attr->addr the address for the new limit of guest memory +:Returns: -EFAULT if the given address is not accessible; + -EINVAL if the virtual machine is of type UCONTROL; + -E2BIG if the given guest memory is to big for that machine; + -EBUSY if a vcpu is already defined; + -ENOMEM if not enough memory is available for a new shadow guest mapping; + 0 otherwise. + +Allows userspace to query the actual limit and set a new limit for +the maximum guest memory size. The limit will be rounded up to +2048 MB, 4096 GB, 8192 TB respectively, as this limit is governed by +the number of page table levels. In the case that there is no limit we will set +the limit to KVM_S390_NO_MEM_LIMIT (U64_MAX). + +2. GROUP: KVM_S390_VM_CPU_MODEL +=============================== + +:Architectures: s390 + +2.1. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE (r/o) +--------------------------------------------- + +Allows user space to retrieve machine and kvm specific cpu related information:: + + struct kvm_s390_vm_cpu_machine { + __u64 cpuid; # CPUID of host + __u32 ibc; # IBC level range offered by host + __u8 pad[4]; + __u64 fac_mask[256]; # set of cpu facilities enabled by KVM + __u64 fac_list[256]; # set of cpu facilities offered by host + } + +:Parameters: address of buffer to store the machine related cpu data + of type struct kvm_s390_vm_cpu_machine* +:Returns: -EFAULT if the given address is not accessible from kernel space; + -ENOMEM if not enough memory is available to process the ioctl; + 0 in case of success. + +2.2. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR (r/w) +=============================================== + +Allows user space to retrieve or request to change cpu related information for a vcpu:: + + struct kvm_s390_vm_cpu_processor { + __u64 cpuid; # CPUID currently (to be) used by this vcpu + __u16 ibc; # IBC level currently (to be) used by this vcpu + __u8 pad[6]; + __u64 fac_list[256]; # set of cpu facilities currently (to be) used + # by this vcpu + } + +KVM does not enforce or limit the cpu model data in any form. Take the information +retrieved by means of KVM_S390_VM_CPU_MACHINE as hint for reasonable configuration +setups. Instruction interceptions triggered by additionally set facility bits that +are not handled by KVM need to by implemented in the VM driver code. + +:Parameters: address of buffer to store/set the processor related cpu + data of type struct kvm_s390_vm_cpu_processor*. +:Returns: -EBUSY in case 1 or more vcpus are already activated (only in write case); + -EFAULT if the given address is not accessible from kernel space; + -ENOMEM if not enough memory is available to process the ioctl; + 0 in case of success. + +.. _KVM_S390_VM_CPU_MACHINE_FEAT: + +2.3. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE_FEAT (r/o) +-------------------------------------------------- + +Allows user space to retrieve available cpu features. A feature is available if +provided by the hardware and supported by kvm. In theory, cpu features could +even be completely emulated by kvm. + +:: + + struct kvm_s390_vm_cpu_feat { + __u64 feat[16]; # Bitmap (1 = feature available), MSB 0 bit numbering + }; + +:Parameters: address of a buffer to load the feature list from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + 0 in case of success. + +2.4. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR_FEAT (r/w) +---------------------------------------------------- + +Allows user space to retrieve or change enabled cpu features for all VCPUs of a +VM. Features that are not available cannot be enabled. + +See :ref:`KVM_S390_VM_CPU_MACHINE_FEAT` for +a description of the parameter struct. + +:Parameters: address of a buffer to store/load the feature list from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL if a cpu feature that is not available is to be enabled; + -EBUSY if at least one VCPU has already been defined; + 0 in case of success. + +.. _KVM_S390_VM_CPU_MACHINE_SUBFUNC: + +2.5. ATTRIBUTE: KVM_S390_VM_CPU_MACHINE_SUBFUNC (r/o) +----------------------------------------------------- + +Allows user space to retrieve available cpu subfunctions without any filtering +done by a set IBC. These subfunctions are indicated to the guest VCPU via +query or "test bit" subfunctions and used e.g. by cpacf functions, plo and ptff. + +A subfunction block is only valid if KVM_S390_VM_CPU_MACHINE contains the +STFL(E) bit introducing the affected instruction. If the affected instruction +indicates subfunctions via a "query subfunction", the response block is +contained in the returned struct. If the affected instruction +indicates subfunctions via a "test bit" mechanism, the subfunction codes are +contained in the returned struct in MSB 0 bit numbering. + +:: + + struct kvm_s390_vm_cpu_subfunc { + u8 plo[32]; # always valid (ESA/390 feature) + u8 ptff[16]; # valid with TOD-clock steering + u8 kmac[16]; # valid with Message-Security-Assist + u8 kmc[16]; # valid with Message-Security-Assist + u8 km[16]; # valid with Message-Security-Assist + u8 kimd[16]; # valid with Message-Security-Assist + u8 klmd[16]; # valid with Message-Security-Assist + u8 pckmo[16]; # valid with Message-Security-Assist-Extension 3 + u8 kmctr[16]; # valid with Message-Security-Assist-Extension 4 + u8 kmf[16]; # valid with Message-Security-Assist-Extension 4 + u8 kmo[16]; # valid with Message-Security-Assist-Extension 4 + u8 pcc[16]; # valid with Message-Security-Assist-Extension 4 + u8 ppno[16]; # valid with Message-Security-Assist-Extension 5 + u8 kma[16]; # valid with Message-Security-Assist-Extension 8 + u8 kdsa[16]; # valid with Message-Security-Assist-Extension 9 + u8 reserved[1792]; # reserved for future instructions + }; + +:Parameters: address of a buffer to load the subfunction blocks from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + 0 in case of success. + +2.6. ATTRIBUTE: KVM_S390_VM_CPU_PROCESSOR_SUBFUNC (r/w) +------------------------------------------------------- + +Allows user space to retrieve or change cpu subfunctions to be indicated for +all VCPUs of a VM. This attribute will only be available if kernel and +hardware support are in place. + +The kernel uses the configured subfunction blocks for indication to +the guest. A subfunction block will only be used if the associated STFL(E) bit +has not been disabled by user space (so the instruction to be queried is +actually available for the guest). + +As long as no data has been written, a read will fail. The IBC will be used +to determine available subfunctions in this case, this will guarantee backward +compatibility. + +See :ref:`KVM_S390_VM_CPU_MACHINE_SUBFUNC` for a +description of the parameter struct. + +:Parameters: address of a buffer to store/load the subfunction blocks from. +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL when reading, if there was no write yet; + -EBUSY if at least one VCPU has already been defined; + 0 in case of success. + +3. GROUP: KVM_S390_VM_TOD +========================= + +:Architectures: s390 + +3.1. ATTRIBUTE: KVM_S390_VM_TOD_HIGH +------------------------------------ + +Allows user space to set/get the TOD clock extension (u8) (superseded by +KVM_S390_VM_TOD_EXT). + +:Parameters: address of a buffer in user space to store the data (u8) to +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) + +3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW +----------------------------------- + +Allows user space to set/get bits 0-63 of the TOD clock register as defined in +the POP (u64). + +:Parameters: address of a buffer in user space to store the data (u64) to +:Returns: -EFAULT if the given address is not accessible from kernel space + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) + +3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT +----------------------------------- + +Allows user space to set/get bits 0-63 of the TOD clock register as defined in +the POP (u64). If the guest CPU model supports the TOD clock extension (u8), it +also allows user space to get/set it. If the guest CPU model does not support +it, it is stored as 0 and not allowed to be set to a value != 0. + +:Parameters: address of a buffer in user space to store the data + (kvm_s390_vm_tod_clock) to +:Returns: -EFAULT if the given address is not accessible from kernel space; + -EINVAL if setting the TOD clock extension to != 0 is not supported + -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor) + +4. GROUP: KVM_S390_VM_CRYPTO +============================ + +:Architectures: s390 + +4.1. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_AES_KW (w/o) +------------------------------------------------------ + +Allows user space to enable aes key wrapping, including generating a new +wrapping key. + +:Parameters: none +:Returns: 0 + +4.2. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_DEA_KW (w/o) +------------------------------------------------------ + +Allows user space to enable dea key wrapping, including generating a new +wrapping key. + +:Parameters: none +:Returns: 0 + +4.3. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_AES_KW (w/o) +------------------------------------------------------- + +Allows user space to disable aes key wrapping, clearing the wrapping key. + +:Parameters: none +:Returns: 0 + +4.4. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_DEA_KW (w/o) +------------------------------------------------------- + +Allows user space to disable dea key wrapping, clearing the wrapping key. + +:Parameters: none +:Returns: 0 + +5. GROUP: KVM_S390_VM_MIGRATION +=============================== + +:Architectures: s390 + +5.1. ATTRIBUTE: KVM_S390_VM_MIGRATION_STOP (w/o) +------------------------------------------------ + +Allows userspace to stop migration mode, needed for PGSTE migration. +Setting this attribute when migration mode is not active will have no +effects. + +:Parameters: none +:Returns: 0 + +5.2. ATTRIBUTE: KVM_S390_VM_MIGRATION_START (w/o) +------------------------------------------------- + +Allows userspace to start migration mode, needed for PGSTE migration. +Setting this attribute when migration mode is already active will have +no effects. + +Dirty tracking must be enabled on all memslots, else -EINVAL is returned. When +dirty tracking is disabled on any memslot, migration mode is automatically +stopped. + +:Parameters: none +:Returns: -ENOMEM if there is not enough free memory to start migration mode; + -EINVAL if the state of the VM is invalid (e.g. no memory defined); + 0 in case of success. + +5.3. ATTRIBUTE: KVM_S390_VM_MIGRATION_STATUS (r/o) +-------------------------------------------------- + +Allows userspace to query the status of migration mode. + +:Parameters: address of a buffer in user space to store the data (u64) to; + the data itself is either 0 if migration mode is disabled or 1 + if it is enabled +:Returns: -EFAULT if the given address is not accessible from kernel space; + 0 in case of success. + +6. GROUP: KVM_ARM_VM_SMCCC_CTRL +=============================== + +:Architectures: arm64 + +6.1. ATTRIBUTE: KVM_ARM_VM_SMCCC_FILTER (w/o) +--------------------------------------------- + +:Parameters: Pointer to a ``struct kvm_smccc_filter`` + +:Returns: + + ====== =========================================== + EEXIST Range intersects with a previously inserted + or reserved range + EBUSY A vCPU in the VM has already run + EINVAL Invalid filter configuration + ENOMEM Failed to allocate memory for the in-kernel + representation of the SMCCC filter + ====== =========================================== + +Requests the installation of an SMCCC call filter described as follows:: + + enum kvm_smccc_filter_action { + KVM_SMCCC_FILTER_HANDLE = 0, + KVM_SMCCC_FILTER_DENY, + KVM_SMCCC_FILTER_FWD_TO_USER, + }; + + struct kvm_smccc_filter { + __u32 base; + __u32 nr_functions; + __u8 action; + __u8 pad[15]; + }; + +The filter is defined as a set of non-overlapping ranges. Each +range defines an action to be applied to SMCCC calls within the range. +Userspace can insert multiple ranges into the filter by using +successive calls to this attribute. + +The default configuration of KVM is such that all implemented SMCCC +calls are allowed. Thus, the SMCCC filter can be defined sparsely +by userspace, only describing ranges that modify the default behavior. + +The range expressed by ``struct kvm_smccc_filter`` is +[``base``, ``base + nr_functions``). The range is not allowed to wrap, +i.e. userspace cannot rely on ``base + nr_functions`` overflowing. + +The SMCCC filter applies to both SMC and HVC calls initiated by the +guest. The SMCCC filter gates the in-kernel emulation of SMCCC calls +and as such takes effect before other interfaces that interact with +SMCCC calls (e.g. hypercall bitmap registers). + +Actions: + + - ``KVM_SMCCC_FILTER_HANDLE``: Allows the guest SMCCC call to be + handled in-kernel. It is strongly recommended that userspace *not* + explicitly describe the allowed SMCCC call ranges. + + - ``KVM_SMCCC_FILTER_DENY``: Rejects the guest SMCCC call in-kernel + and returns to the guest. + + - ``KVM_SMCCC_FILTER_FWD_TO_USER``: The guest SMCCC call is forwarded + to userspace with an exit reason of ``KVM_EXIT_HYPERCALL``. + +The ``pad`` field is reserved for future use and must be zero. KVM may +return ``-EINVAL`` if the field is nonzero. + +KVM reserves the 'Arm Architecture Calls' range of function IDs and +will reject attempts to define a filter for any portion of these ranges: + + =========== =============== + Start End (inclusive) + =========== =============== + 0x8000_0000 0x8000_FFFF + 0xC000_0000 0xC000_FFFF + =========== =============== diff --git a/Documentation/virt/kvm/devices/xics.rst b/Documentation/virt/kvm/devices/xics.rst new file mode 100644 index 0000000000..bf32c77174 --- /dev/null +++ b/Documentation/virt/kvm/devices/xics.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +XICS interrupt controller +========================= + +Device type supported: KVM_DEV_TYPE_XICS + +Groups: + 1. KVM_DEV_XICS_GRP_SOURCES + Attributes: + + One per interrupt source, indexed by the source number. + 2. KVM_DEV_XICS_GRP_CTRL + Attributes: + + 2.1 KVM_DEV_XICS_NR_SERVERS (write only) + + The kvm_device_attr.addr points to a __u32 value which is the number of + interrupt server numbers (ie, highest possible vcpu id plus one). + + Errors: + + ======= ========================================== + -EINVAL Value greater than KVM_MAX_VCPU_IDS. + -EFAULT Invalid user pointer for attr->addr. + -EBUSY A vcpu is already connected to the device. + ======= ========================================== + +This device emulates the XICS (eXternal Interrupt Controller +Specification) defined in PAPR. The XICS has a set of interrupt +sources, each identified by a 20-bit source number, and a set of +Interrupt Control Presentation (ICP) entities, also called "servers", +each associated with a virtual CPU. + +The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH +capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and +the interrupt server number (i.e. the vcpu number from the XICS's +point of view) in args[1] of the kvm_enable_cap struct. Each ICP has +64 bits of state which can be read and written using the +KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu. The 64 bit +state word has the following bitfields, starting at the +least-significant end of the word: + +* Unused, 16 bits + +* Pending interrupt priority, 8 bits + Zero is the highest priority, 255 means no interrupt is pending. + +* Pending IPI (inter-processor interrupt) priority, 8 bits + Zero is the highest priority, 255 means no IPI is pending. + +* Pending interrupt source number, 24 bits + Zero means no interrupt pending, 2 means an IPI is pending + +* Current processor priority, 8 bits + Zero is the highest priority, meaning no interrupts can be + delivered, and 255 is the lowest priority. + +Each source has 64 bits of state that can be read and written using +the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the +KVM_DEV_XICS_GRP_SOURCES attribute group, with the attribute number being +the interrupt source number. The 64 bit state word has the following +bitfields, starting from the least-significant end of the word: + +* Destination (server number), 32 bits + + This specifies where the interrupt should be sent, and is the + interrupt server number specified for the destination vcpu. + +* Priority, 8 bits + + This is the priority specified for this interrupt source, where 0 is + the highest priority and 255 is the lowest. An interrupt with a + priority of 255 will never be delivered. + +* Level sensitive flag, 1 bit + + This bit is 1 for a level-sensitive interrupt source, or 0 for + edge-sensitive (or MSI). + +* Masked flag, 1 bit + + This bit is set to 1 if the interrupt is masked (cannot be delivered + regardless of its priority), for example by the ibm,int-off RTAS + call, or 0 if it is not masked. + +* Pending flag, 1 bit + + This bit is 1 if the source has a pending interrupt, otherwise 0. + +Only one XICS instance may be created per VM. diff --git a/Documentation/virt/kvm/devices/xive.rst b/Documentation/virt/kvm/devices/xive.rst new file mode 100644 index 0000000000..a07e16d340 --- /dev/null +++ b/Documentation/virt/kvm/devices/xive.rst @@ -0,0 +1,247 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================================== +POWER9 eXternal Interrupt Virtualization Engine (XIVE Gen1) +=========================================================== + +Device types supported: + - KVM_DEV_TYPE_XIVE POWER9 XIVE Interrupt Controller generation 1 + +This device acts as a VM interrupt controller. It provides the KVM +interface to configure the interrupt sources of a VM in the underlying +POWER9 XIVE interrupt controller. + +Only one XIVE instance may be instantiated. A guest XIVE device +requires a POWER9 host and the guest OS should have support for the +XIVE native exploitation interrupt mode. If not, it should run using +the legacy interrupt mode, referred as XICS (POWER7/8). + +* Device Mappings + + The KVM device exposes different MMIO ranges of the XIVE HW which + are required for interrupt management. These are exposed to the + guest in VMAs populated with a custom VM fault handler. + + 1. Thread Interrupt Management Area (TIMA) + + Each thread has an associated Thread Interrupt Management context + composed of a set of registers. These registers let the thread + handle priority management and interrupt acknowledgment. The most + important are : + + - Interrupt Pending Buffer (IPB) + - Current Processor Priority (CPPR) + - Notification Source Register (NSR) + + They are exposed to software in four different pages each proposing + a view with a different privilege. The first page is for the + physical thread context and the second for the hypervisor. Only the + third (operating system) and the fourth (user level) are exposed the + guest. + + 2. Event State Buffer (ESB) + + Each source is associated with an Event State Buffer (ESB) with + either a pair of even/odd pair of pages which provides commands to + manage the source: to trigger, to EOI, to turn off the source for + instance. + + 3. Device pass-through + + When a device is passed-through into the guest, the source + interrupts are from a different HW controller (PHB4) and the ESB + pages exposed to the guest should accommodate this change. + + The passthru_irq helpers, kvmppc_xive_set_mapped() and + kvmppc_xive_clr_mapped() are called when the device HW irqs are + mapped into or unmapped from the guest IRQ number space. The KVM + device extends these helpers to clear the ESB pages of the guest IRQ + number being mapped and then lets the VM fault handler repopulate. + The handler will insert the ESB page corresponding to the HW + interrupt of the device being passed-through or the initial IPI ESB + page if the device has being removed. + + The ESB remapping is fully transparent to the guest and the OS + device driver. All handling is done within VFIO and the above + helpers in KVM-PPC. + +* Groups: + +1. KVM_DEV_XIVE_GRP_CTRL + Provides global controls on the device + + Attributes: + 1.1 KVM_DEV_XIVE_RESET (write only) + Resets the interrupt controller configuration for sources and event + queues. To be used by kexec and kdump. + + Errors: none + + 1.2 KVM_DEV_XIVE_EQ_SYNC (write only) + Sync all the sources and queues and mark the EQ pages dirty. This + to make sure that a consistent memory state is captured when + migrating the VM. + + Errors: none + + 1.3 KVM_DEV_XIVE_NR_SERVERS (write only) + The kvm_device_attr.addr points to a __u32 value which is the number of + interrupt server numbers (ie, highest possible vcpu id plus one). + + Errors: + + ======= ========================================== + -EINVAL Value greater than KVM_MAX_VCPU_IDS. + -EFAULT Invalid user pointer for attr->addr. + -EBUSY A vCPU is already connected to the device. + ======= ========================================== + +2. KVM_DEV_XIVE_GRP_SOURCE (write only) + Initializes a new source in the XIVE device and mask it. + + Attributes: + Interrupt source number (64-bit) + + The kvm_device_attr.addr points to a __u64 value:: + + bits: | 63 .... 2 | 1 | 0 + values: | unused | level | type + + - type: 0:MSI 1:LSI + - level: assertion level in case of an LSI. + + Errors: + + ======= ========================================== + -E2BIG Interrupt source number is out of range + -ENOMEM Could not create a new source block + -EFAULT Invalid user pointer for attr->addr. + -ENXIO Could not allocate underlying HW interrupt + ======= ========================================== + +3. KVM_DEV_XIVE_GRP_SOURCE_CONFIG (write only) + Configures source targeting + + Attributes: + Interrupt source number (64-bit) + + The kvm_device_attr.addr points to a __u64 value:: + + bits: | 63 .... 33 | 32 | 31 .. 3 | 2 .. 0 + values: | eisn | mask | server | priority + + - priority: 0-7 interrupt priority level + - server: CPU number chosen to handle the interrupt + - mask: mask flag (unused) + - eisn: Effective Interrupt Source Number + + Errors: + + ======= ======================================================= + -ENOENT Unknown source number + -EINVAL Not initialized source number + -EINVAL Invalid priority + -EINVAL Invalid CPU number. + -EFAULT Invalid user pointer for attr->addr. + -ENXIO CPU event queues not configured or configuration of the + underlying HW interrupt failed + -EBUSY No CPU available to serve interrupt + ======= ======================================================= + +4. KVM_DEV_XIVE_GRP_EQ_CONFIG (read-write) + Configures an event queue of a CPU + + Attributes: + EQ descriptor identifier (64-bit) + + The EQ descriptor identifier is a tuple (server, priority):: + + bits: | 63 .... 32 | 31 .. 3 | 2 .. 0 + values: | unused | server | priority + + The kvm_device_attr.addr points to:: + + struct kvm_ppc_xive_eq { + __u32 flags; + __u32 qshift; + __u64 qaddr; + __u32 qtoggle; + __u32 qindex; + __u8 pad[40]; + }; + + - flags: queue flags + KVM_XIVE_EQ_ALWAYS_NOTIFY (required) + forces notification without using the coalescing mechanism + provided by the XIVE END ESBs. + - qshift: queue size (power of 2) + - qaddr: real address of queue + - qtoggle: current queue toggle bit + - qindex: current queue index + - pad: reserved for future use + + Errors: + + ======= ========================================= + -ENOENT Invalid CPU number + -EINVAL Invalid priority + -EINVAL Invalid flags + -EINVAL Invalid queue size + -EINVAL Invalid queue address + -EFAULT Invalid user pointer for attr->addr. + -EIO Configuration of the underlying HW failed + ======= ========================================= + +5. KVM_DEV_XIVE_GRP_SOURCE_SYNC (write only) + Synchronize the source to flush event notifications + + Attributes: + Interrupt source number (64-bit) + + Errors: + + ======= ============================= + -ENOENT Unknown source number + -EINVAL Not initialized source number + ======= ============================= + +* VCPU state + + The XIVE IC maintains VP interrupt state in an internal structure + called the NVT. When a VP is not dispatched on a HW processor + thread, this structure can be updated by HW if the VP is the target + of an event notification. + + It is important for migration to capture the cached IPB from the NVT + as it synthesizes the priorities of the pending interrupts. We + capture a bit more to report debug information. + + KVM_REG_PPC_VP_STATE (2 * 64bits):: + + bits: | 63 .... 32 | 31 .... 0 | + values: | TIMA word0 | TIMA word1 | + bits: | 127 .......... 64 | + values: | unused | + +* Migration: + + Saving the state of a VM using the XIVE native exploitation mode + should follow a specific sequence. When the VM is stopped : + + 1. Mask all sources (PQ=01) to stop the flow of events. + + 2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to + flush any in-flight event notification and to stabilize the EQs. At + this stage, the EQ pages are marked dirty to make sure they are + transferred in the migration sequence. + + 3. Capture the state of the source targeting, the EQs configuration + and the state of thread interrupt context registers. + + Restore is similar: + + 1. Restore the EQ configuration. As targeting depends on it. + 2. Restore targeting + 3. Restore the thread interrupt contexts + 4. Restore the source states + 5. Let the vCPU run diff --git a/Documentation/virt/kvm/halt-polling.rst b/Documentation/virt/kvm/halt-polling.rst new file mode 100644 index 0000000000..c82a04b709 --- /dev/null +++ b/Documentation/virt/kvm/halt-polling.rst @@ -0,0 +1,153 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +The KVM halt polling system +=========================== + +The KVM halt polling system provides a feature within KVM whereby the latency +of a guest can, under some circumstances, be reduced by polling in the host +for some time period after the guest has elected to no longer run by cedeing. +That is, when a guest vcpu has ceded, or in the case of powerpc when all of the +vcpus of a single vcore have ceded, the host kernel polls for wakeup conditions +before giving up the cpu to the scheduler in order to let something else run. + +Polling provides a latency advantage in cases where the guest can be run again +very quickly by at least saving us a trip through the scheduler, normally on +the order of a few micro-seconds, although performance benefits are workload +dependent. In the event that no wakeup source arrives during the polling +interval or some other task on the runqueue is runnable the scheduler is +invoked. Thus halt polling is especially useful on workloads with very short +wakeup periods where the time spent halt polling is minimised and the time +savings of not invoking the scheduler are distinguishable. + +The generic halt polling code is implemented in: + + virt/kvm/kvm_main.c: kvm_vcpu_block() + +The powerpc kvm-hv specific case is implemented in: + + arch/powerpc/kvm/book3s_hv.c: kvmppc_vcore_blocked() + +Halt Polling Interval +===================== + +The maximum time for which to poll before invoking the scheduler, referred to +as the halt polling interval, is increased and decreased based on the perceived +effectiveness of the polling in an attempt to limit pointless polling. +This value is stored in either the vcpu struct: + + kvm_vcpu->halt_poll_ns + +or in the case of powerpc kvm-hv, in the vcore struct: + + kvmppc_vcore->halt_poll_ns + +Thus this is a per vcpu (or vcore) value. + +During polling if a wakeup source is received within the halt polling interval, +the interval is left unchanged. In the event that a wakeup source isn't +received during the polling interval (and thus schedule is invoked) there are +two options, either the polling interval and total block time[0] were less than +the global max polling interval (see module params below), or the total block +time was greater than the global max polling interval. + +In the event that both the polling interval and total block time were less than +the global max polling interval then the polling interval can be increased in +the hope that next time during the longer polling interval the wake up source +will be received while the host is polling and the latency benefits will be +received. The polling interval is grown in the function grow_halt_poll_ns() and +is multiplied by the module parameters halt_poll_ns_grow and +halt_poll_ns_grow_start. + +In the event that the total block time was greater than the global max polling +interval then the host will never poll for long enough (limited by the global +max) to wakeup during the polling interval so it may as well be shrunk in order +to avoid pointless polling. The polling interval is shrunk in the function +shrink_halt_poll_ns() and is divided by the module parameter +halt_poll_ns_shrink, or set to 0 iff halt_poll_ns_shrink == 0. + +It is worth noting that this adjustment process attempts to hone in on some +steady state polling interval but will only really do a good job for wakeups +which come at an approximately constant rate, otherwise there will be constant +adjustment of the polling interval. + +[0] total block time: + the time between when the halt polling function is + invoked and a wakeup source received (irrespective of + whether the scheduler is invoked within that function). + +Module Parameters +================= + +The kvm module has 3 tuneable module parameters to adjust the global max +polling interval as well as the rate at which the polling interval is grown and +shrunk. These variables are defined in include/linux/kvm_host.h and as module +parameters in virt/kvm/kvm_main.c, or arch/powerpc/kvm/book3s_hv.c in the +powerpc kvm-hv case. + ++-----------------------+---------------------------+-------------------------+ +|Module Parameter | Description | Default Value | ++-----------------------+---------------------------+-------------------------+ +|halt_poll_ns | The global max polling | KVM_HALT_POLL_NS_DEFAULT| +| | interval which defines | | +| | the ceiling value of the | | +| | polling interval for | (per arch value) | +| | each vcpu. | | ++-----------------------+---------------------------+-------------------------+ +|halt_poll_ns_grow | The value by which the | 2 | +| | halt polling interval is | | +| | multiplied in the | | +| | grow_halt_poll_ns() | | +| | function. | | ++-----------------------+---------------------------+-------------------------+ +|halt_poll_ns_grow_start| The initial value to grow | 10000 | +| | to from zero in the | | +| | grow_halt_poll_ns() | | +| | function. | | ++-----------------------+---------------------------+-------------------------+ +|halt_poll_ns_shrink | The value by which the | 0 | +| | halt polling interval is | | +| | divided in the | | +| | shrink_halt_poll_ns() | | +| | function. | | ++-----------------------+---------------------------+-------------------------+ + +These module parameters can be set from the sysfs files in: + + /sys/module/kvm/parameters/ + +Note: these module parameters are system-wide values and are not able to + be tuned on a per vm basis. + +Any changes to these parameters will be picked up by new and existing vCPUs the +next time they halt, with the notable exception of VMs using KVM_CAP_HALT_POLL +(see next section). + +KVM_CAP_HALT_POLL +================= + +KVM_CAP_HALT_POLL is a VM capability that allows userspace to override halt_poll_ns +on a per-VM basis. VMs using KVM_CAP_HALT_POLL ignore halt_poll_ns completely (but +still obey halt_poll_ns_grow, halt_poll_ns_grow_start, and halt_poll_ns_shrink). + +See Documentation/virt/kvm/api.rst for more information on this capability. + +Further Notes +============= + +- Care should be taken when setting the halt_poll_ns module parameter as a large value + has the potential to drive the cpu usage to 100% on a machine which would be almost + entirely idle otherwise. This is because even if a guest has wakeups during which very + little work is done and which are quite far apart, if the period is shorter than the + global max polling interval (halt_poll_ns) then the host will always poll for the + entire block time and thus cpu utilisation will go to 100%. + +- Halt polling essentially presents a trade-off between power usage and latency and + the module parameters should be used to tune the affinity for this. Idle cpu time is + essentially converted to host kernel time with the aim of decreasing latency when + entering the guest. + +- Halt polling will only be conducted by the host when no other tasks are runnable on + that cpu, otherwise the polling will cease immediately and schedule will be invoked to + allow that other task to run. Thus this doesn't allow a guest to cause denial of service + of the cpu. diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst new file mode 100644 index 0000000000..ad13ec55dd --- /dev/null +++ b/Documentation/virt/kvm/index.rst @@ -0,0 +1,21 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=== +KVM +=== + +.. toctree:: + :maxdepth: 2 + + api + devices/index + + arm/index + s390/index + ppc-pv + x86/index + + locking + vcpu-requests + halt-polling + review-checklist diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst new file mode 100644 index 0000000000..3a034db5e5 --- /dev/null +++ b/Documentation/virt/kvm/locking.rst @@ -0,0 +1,301 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +KVM Lock Overview +================= + +1. Acquisition Orders +--------------------- + +The acquisition orders for mutexes are as follows: + +- cpus_read_lock() is taken outside kvm_lock + +- kvm->lock is taken outside vcpu->mutex + +- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock + +- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring + them together is quite rare. + +- kvm->mn_active_invalidate_count ensures that pairs of + invalidate_range_start() and invalidate_range_end() callbacks + use the same memslots array. kvm->slots_lock and kvm->slots_arch_lock + are taken on the waiting side when modifying memslots, so MMU notifiers + must not take either kvm->slots_lock or kvm->slots_arch_lock. + +For SRCU: + +- ``synchronize_srcu(&kvm->srcu)`` is called inside critical sections + for kvm->lock, vcpu->mutex and kvm->slots_lock. These locks _cannot_ + be taken inside a kvm->srcu read-side critical section; that is, the + following is broken:: + + srcu_read_lock(&kvm->srcu); + mutex_lock(&kvm->slots_lock); + +- kvm->slots_arch_lock instead is released before the call to + ``synchronize_srcu()``. It _can_ therefore be taken inside a + kvm->srcu read-side critical section, for example while processing + a vmexit. + +On x86: + +- vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock and kvm->arch.xen.xen_lock + +- kvm->arch.mmu_lock is an rwlock. kvm->arch.tdp_mmu_pages_lock and + kvm->arch.mmu_unsync_pages_lock are taken inside kvm->arch.mmu_lock, and + cannot be taken without already holding kvm->arch.mmu_lock (typically with + ``read_lock`` for the TDP MMU, thus the need for additional spinlocks). + +Everything else is a leaf: no other lock is taken inside the critical +sections. + +2. Exception +------------ + +Fast page fault: + +Fast page fault is the fast path which fixes the guest page fault out of +the mmu-lock on x86. Currently, the page fault can be fast in one of the +following two cases: + +1. Access Tracking: The SPTE is not present, but it is marked for access + tracking. That means we need to restore the saved R/X bits. This is + described in more detail later below. + +2. Write-Protection: The SPTE is present and the fault is caused by + write-protect. That means we just need to change the W bit of the spte. + +What we use to avoid all the races is the Host-writable bit and MMU-writable bit +on the spte: + +- Host-writable means the gfn is writable in the host kernel page tables and in + its KVM memslot. +- MMU-writable means the gfn is writable in the guest's mmu and it is not + write-protected by shadow page write-protection. + +On fast page fault path, we will use cmpxchg to atomically set the spte W +bit if spte.HOST_WRITEABLE = 1 and spte.WRITE_PROTECT = 1, to restore the saved +R/X bits if for an access-traced spte, or both. This is safe because whenever +changing these bits can be detected by cmpxchg. + +But we need carefully check these cases: + +1) The mapping from gfn to pfn + +The mapping from gfn to pfn may be changed since we can only ensure the pfn +is not changed during cmpxchg. This is a ABA problem, for example, below case +will happen: + ++------------------------------------------------------------------------+ +| At the beginning:: | +| | +| gpte = gfn1 | +| gfn1 is mapped to pfn1 on host | +| spte is the shadow page table entry corresponding with gpte and | +| spte = pfn1 | ++------------------------------------------------------------------------+ +| On fast page fault path: | ++------------------------------------+-----------------------------------+ +| CPU 0: | CPU 1: | ++------------------------------------+-----------------------------------+ +| :: | | +| | | +| old_spte = *spte; | | ++------------------------------------+-----------------------------------+ +| | pfn1 is swapped out:: | +| | | +| | spte = 0; | +| | | +| | pfn1 is re-alloced for gfn2. | +| | | +| | gpte is changed to point to | +| | gfn2 by the guest:: | +| | | +| | spte = pfn1; | ++------------------------------------+-----------------------------------+ +| :: | +| | +| if (cmpxchg(spte, old_spte, old_spte+W) | +| mark_page_dirty(vcpu->kvm, gfn1) | +| OOPS!!! | ++------------------------------------------------------------------------+ + +We dirty-log for gfn1, that means gfn2 is lost in dirty-bitmap. + +For direct sp, we can easily avoid it since the spte of direct sp is fixed +to gfn. For indirect sp, we disabled fast page fault for simplicity. + +A solution for indirect sp could be to pin the gfn, for example via +kvm_vcpu_gfn_to_pfn_atomic, before the cmpxchg. After the pinning: + +- We have held the refcount of pfn; that means the pfn can not be freed and + be reused for another gfn. +- The pfn is writable and therefore it cannot be shared between different gfns + by KSM. + +Then, we can ensure the dirty bitmaps is correctly set for a gfn. + +2) Dirty bit tracking + +In the origin code, the spte can be fast updated (non-atomically) if the +spte is read-only and the Accessed bit has already been set since the +Accessed bit and Dirty bit can not be lost. + +But it is not true after fast page fault since the spte can be marked +writable between reading spte and updating spte. Like below case: + ++------------------------------------------------------------------------+ +| At the beginning:: | +| | +| spte.W = 0 | +| spte.Accessed = 1 | ++------------------------------------+-----------------------------------+ +| CPU 0: | CPU 1: | ++------------------------------------+-----------------------------------+ +| In mmu_spte_clear_track_bits():: | | +| | | +| old_spte = *spte; | | +| | | +| | | +| /* 'if' condition is satisfied. */| | +| if (old_spte.Accessed == 1 && | | +| old_spte.W == 0) | | +| spte = 0ull; | | ++------------------------------------+-----------------------------------+ +| | on fast page fault path:: | +| | | +| | spte.W = 1 | +| | | +| | memory write on the spte:: | +| | | +| | spte.Dirty = 1 | ++------------------------------------+-----------------------------------+ +| :: | | +| | | +| else | | +| old_spte = xchg(spte, 0ull) | | +| if (old_spte.Accessed == 1) | | +| kvm_set_pfn_accessed(spte.pfn);| | +| if (old_spte.Dirty == 1) | | +| kvm_set_pfn_dirty(spte.pfn); | | +| OOPS!!! | | ++------------------------------------+-----------------------------------+ + +The Dirty bit is lost in this case. + +In order to avoid this kind of issue, we always treat the spte as "volatile" +if it can be updated out of mmu-lock [see spte_has_volatile_bits()]; it means +the spte is always atomically updated in this case. + +3) flush tlbs due to spte updated + +If the spte is updated from writable to read-only, we should flush all TLBs, +otherwise rmap_write_protect will find a read-only spte, even though the +writable spte might be cached on a CPU's TLB. + +As mentioned before, the spte can be updated to writable out of mmu-lock on +fast page fault path. In order to easily audit the path, we see if TLBs needing +to be flushed caused this reason in mmu_spte_update() since this is a common +function to update spte (present -> present). + +Since the spte is "volatile" if it can be updated out of mmu-lock, we always +atomically update the spte and the race caused by fast page fault can be avoided. +See the comments in spte_has_volatile_bits() and mmu_spte_update(). + +Lockless Access Tracking: + +This is used for Intel CPUs that are using EPT but do not support the EPT A/D +bits. In this case, PTEs are tagged as A/D disabled (using ignored bits), and +when the KVM MMU notifier is called to track accesses to a page (via +kvm_mmu_notifier_clear_flush_young), it marks the PTE not-present in hardware +by clearing the RWX bits in the PTE and storing the original R & X bits in more +unused/ignored bits. When the VM tries to access the page later on, a fault is +generated and the fast page fault mechanism described above is used to +atomically restore the PTE to a Present state. The W bit is not saved when the +PTE is marked for access tracking and during restoration to the Present state, +the W bit is set depending on whether or not it was a write access. If it +wasn't, then the W bit will remain clear until a write access happens, at which +time it will be set using the Dirty tracking mechanism described above. + +3. Reference +------------ + +``kvm_lock`` +^^^^^^^^^^^^ + +:Type: mutex +:Arch: any +:Protects: - vm_list + - kvm_usage_count + - hardware virtualization enable/disable +:Comment: KVM also disables CPU hotplug via cpus_read_lock() during + enable/disable. + +``kvm->mn_invalidate_lock`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:Type: spinlock_t +:Arch: any +:Protects: mn_active_invalidate_count, mn_memslots_update_rcuwait + +``kvm_arch::tsc_write_lock`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:Type: raw_spinlock_t +:Arch: x86 +:Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset} + - tsc offset in vmcb +:Comment: 'raw' because updating the tsc offsets must not be preempted. + +``kvm->mmu_lock`` +^^^^^^^^^^^^^^^^^ +:Type: spinlock_t or rwlock_t +:Arch: any +:Protects: -shadow page/shadow tlb entry +:Comment: it is a spinlock since it is used in mmu notifier. + +``kvm->srcu`` +^^^^^^^^^^^^^ +:Type: srcu lock +:Arch: any +:Protects: - kvm->memslots + - kvm->buses +:Comment: The srcu read lock must be held while accessing memslots (e.g. + when using gfn_to_* functions) and while accessing in-kernel + MMIO/PIO address->device structure mapping (kvm->buses). + The srcu index can be stored in kvm_vcpu->srcu_idx per vcpu + if it is needed by multiple functions. + +``kvm->slots_arch_lock`` +^^^^^^^^^^^^^^^^^^^^^^^^ +:Type: mutex +:Arch: any (only needed on x86 though) +:Protects: any arch-specific fields of memslots that have to be modified + in a ``kvm->srcu`` read-side critical section. +:Comment: must be held before reading the pointer to the current memslots, + until after all changes to the memslots are complete + +``wakeup_vcpus_on_cpu_lock`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:Type: spinlock_t +:Arch: x86 +:Protects: wakeup_vcpus_on_cpu +:Comment: This is a per-CPU lock and it is used for VT-d posted-interrupts. + When VT-d posted-interrupts are supported and the VM has assigned + devices, we put the blocked vCPU on the list blocked_vcpu_on_cpu + protected by blocked_vcpu_on_cpu_lock. When VT-d hardware issues + wakeup notification event since external interrupts from the + assigned devices happens, we will find the vCPU on the list to + wakeup. + +``vendor_module_lock`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +:Type: mutex +:Arch: x86 +:Protects: loading a vendor module (kvm_amd or kvm_intel) +:Comment: Exists because using kvm_lock leads to deadlock. cpu_hotplug_lock is + taken outside of kvm_lock, e.g. in KVM's CPU online/offline callbacks, and + many operations need to take cpu_hotplug_lock when loading a vendor module, + e.g. updating static calls. diff --git a/Documentation/virt/kvm/ppc-pv.rst b/Documentation/virt/kvm/ppc-pv.rst new file mode 100644 index 0000000000..740d03d253 --- /dev/null +++ b/Documentation/virt/kvm/ppc-pv.rst @@ -0,0 +1,222 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================= +The PPC KVM paravirtual interface +================================= + +The basic execution principle by which KVM on PowerPC works is to run all kernel +space code in PR=1 which is user space. This way we trap all privileged +instructions and can emulate them accordingly. + +Unfortunately that is also the downfall. There are quite some privileged +instructions that needlessly return us to the hypervisor even though they +could be handled differently. + +This is what the PPC PV interface helps with. It takes privileged instructions +and transforms them into unprivileged ones with some help from the hypervisor. +This cuts down virtualization costs by about 50% on some of my benchmarks. + +The code for that interface can be found in arch/powerpc/kernel/kvm* + +Querying for existence +====================== + +To find out if we're running on KVM or not, we leverage the device tree. When +Linux is running on KVM, a node /hypervisor exists. That node contains a +compatible property with the value "linux,kvm". + +Once you determined you're running under a PV capable KVM, you can now use +hypercalls as described below. + +KVM hypercalls +============== + +Inside the device tree's /hypervisor node there's a property called +'hypercall-instructions'. This property contains at most 4 opcodes that make +up the hypercall. To call a hypercall, just call these instructions. + +The parameters are as follows: + + ======== ================ ================ + Register IN OUT + ======== ================ ================ + r0 - volatile + r3 1st parameter Return code + r4 2nd parameter 1st output value + r5 3rd parameter 2nd output value + r6 4th parameter 3rd output value + r7 5th parameter 4th output value + r8 6th parameter 5th output value + r9 7th parameter 6th output value + r10 8th parameter 7th output value + r11 hypercall number 8th output value + r12 - volatile + ======== ================ ================ + +Hypercall definitions are shared in generic code, so the same hypercall numbers +apply for x86 and powerpc alike with the exception that each KVM hypercall +also needs to be ORed with the KVM vendor code which is (42 << 16). + +Return codes can be as follows: + + ==== ========================= + Code Meaning + ==== ========================= + 0 Success + 12 Hypercall not implemented + <0 Error + ==== ========================= + +The magic page +============== + +To enable communication between the hypervisor and guest there is a new shared +page that contains parts of supervisor visible register state. The guest can +map this shared page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE. + +With this hypercall issued the guest always gets the magic page mapped at the +desired location. The first parameter indicates the effective address when the +MMU is enabled. The second parameter indicates the address in real mode, if +applicable to the target. For now, we always map the page to -4096. This way we +can access it using absolute load and store functions. The following +instruction reads the first field of the magic page:: + + ld rX, -4096(0) + +The interface is designed to be extensible should there be need later to add +additional registers to the magic page. If you add fields to the magic page, +also define a new hypercall feature to indicate that the host can give you more +registers. Only if the host supports the additional features, make use of them. + +The magic page layout is described by struct kvm_vcpu_arch_shared +in arch/powerpc/include/uapi/asm/kvm_para.h. + +Magic page features +=================== + +When mapping the magic page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE, +a second return value is passed to the guest. This second return value contains +a bitmap of available features inside the magic page. + +The following enhancements to the magic page are currently available: + + ============================ ======================================= + KVM_MAGIC_FEAT_SR Maps SR registers r/w in the magic page + KVM_MAGIC_FEAT_MAS0_TO_SPRG7 Maps MASn, ESR, PIR and high SPRGs + ============================ ======================================= + +For enhanced features in the magic page, please check for the existence of the +feature before using them! + +Magic page flags +================ + +In addition to features that indicate whether a host is capable of a particular +feature we also have a channel for a guest to tell the host whether it's capable +of something. This is what we call "flags". + +Flags are passed to the host in the low 12 bits of the Effective Address. + +The following flags are currently available for a guest to expose: + + MAGIC_PAGE_FLAG_NOT_MAPPED_NX Guest handles NX bits correctly wrt magic page + +MSR bits +======== + +The MSR contains bits that require hypervisor intervention and bits that do +not require direct hypervisor intervention because they only get interpreted +when entering the guest or don't have any impact on the hypervisor's behavior. + +The following bits are safe to be set inside the guest: + + - MSR_EE + - MSR_RI + +If any other bit changes in the MSR, please still use mtmsr(d). + +Patched instructions +==================== + +The "ld" and "std" instructions are transformed to "lwz" and "stw" instructions +respectively on 32-bit systems with an added offset of 4 to accommodate for big +endianness. + +The following is a list of mapping the Linux kernel performs when running as +guest. Implementing any of those mappings is optional, as the instruction traps +also act on the shared page. So calling privileged instructions still works as +before. + +======================= ================================ +From To +======================= ================================ +mfmsr rX ld rX, magic_page->msr +mfsprg rX, 0 ld rX, magic_page->sprg0 +mfsprg rX, 1 ld rX, magic_page->sprg1 +mfsprg rX, 2 ld rX, magic_page->sprg2 +mfsprg rX, 3 ld rX, magic_page->sprg3 +mfsrr0 rX ld rX, magic_page->srr0 +mfsrr1 rX ld rX, magic_page->srr1 +mfdar rX ld rX, magic_page->dar +mfdsisr rX lwz rX, magic_page->dsisr + +mtmsr rX std rX, magic_page->msr +mtsprg 0, rX std rX, magic_page->sprg0 +mtsprg 1, rX std rX, magic_page->sprg1 +mtsprg 2, rX std rX, magic_page->sprg2 +mtsprg 3, rX std rX, magic_page->sprg3 +mtsrr0 rX std rX, magic_page->srr0 +mtsrr1 rX std rX, magic_page->srr1 +mtdar rX std rX, magic_page->dar +mtdsisr rX stw rX, magic_page->dsisr + +tlbsync nop + +mtmsrd rX, 0 b <special mtmsr section> +mtmsr rX b <special mtmsr section> + +mtmsrd rX, 1 b <special mtmsrd section> + +[Book3S only] +mtsrin rX, rY b <special mtsrin section> + +[BookE only] +wrteei [0|1] b <special wrteei section> +======================= ================================ + +Some instructions require more logic to determine what's going on than a load +or store instruction can deliver. To enable patching of those, we keep some +RAM around where we can live translate instructions to. What happens is the +following: + + 1) copy emulation code to memory + 2) patch that code to fit the emulated instruction + 3) patch that code to return to the original pc + 4 + 4) patch the original instruction to branch to the new code + +That way we can inject an arbitrary amount of code as replacement for a single +instruction. This allows us to check for pending interrupts when setting EE=1 +for example. + +Hypercall ABIs in KVM on PowerPC +================================= + +1) KVM hypercalls (ePAPR) + +These are ePAPR compliant hypercall implementation (mentioned above). Even +generic hypercalls are implemented here, like the ePAPR idle hcall. These are +available on all targets. + +2) PAPR hypercalls + +PAPR hypercalls are needed to run server PowerPC PAPR guests (-M pseries in QEMU). +These are the same hypercalls that pHyp, the POWER hypervisor, implements. Some of +them are handled in the kernel, some are handled in user space. This is only +available on book3s_64. + +3) OSI hypercalls + +Mac-on-Linux is another user of KVM on PowerPC, which has its own hypercall (long +before KVM). This is supported to maintain compatibility. All these hypercalls get +forwarded to user space. This is only useful on book3s_32, but can be used with +book3s_64 as well. diff --git a/Documentation/virt/kvm/review-checklist.rst b/Documentation/virt/kvm/review-checklist.rst new file mode 100644 index 0000000000..dc01aea405 --- /dev/null +++ b/Documentation/virt/kvm/review-checklist.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +Review checklist for kvm patches +================================ + +1. The patch must follow Documentation/process/coding-style.rst and + Documentation/process/submitting-patches.rst. + +2. Patches should be against kvm.git master branch. + +3. If the patch introduces or modifies a new userspace API: + - the API must be documented in Documentation/virt/kvm/api.rst + - the API must be discoverable using KVM_CHECK_EXTENSION + +4. New state must include support for save/restore. + +5. New features must default to off (userspace should explicitly request them). + Performance improvements can and should default to on. + +6. New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2 + +7. Emulator changes should be accompanied by unit tests for qemu-kvm.git + kvm/test directory. + +8. Changes should be vendor neutral when possible. Changes to common code + are better than duplicating changes to vendor code. + +9. Similarly, prefer changes to arch independent code than to arch dependent + code. + +10. User/kernel interfaces and guest/host interfaces must be 64-bit clean + (all variables and sizes naturally aligned on 64-bit; use specific types + only - u64 rather than ulong). + +11. New guest visible features must either be documented in a hardware manual + or be accompanied by documentation. + +12. Features must be robust against reset and kexec - for example, shared + host/guest memory must be unshared to prevent the host from writing to + guest memory that the guest has not reserved for this purpose. diff --git a/Documentation/virt/kvm/s390/index.rst b/Documentation/virt/kvm/s390/index.rst new file mode 100644 index 0000000000..44ec9ab14b --- /dev/null +++ b/Documentation/virt/kvm/s390/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +KVM for s390 systems +==================== + +.. toctree:: + :maxdepth: 2 + + s390-diag + s390-pv + s390-pv-boot + s390-pv-dump diff --git a/Documentation/virt/kvm/s390/s390-diag.rst b/Documentation/virt/kvm/s390/s390-diag.rst new file mode 100644 index 0000000000..ca85f030eb --- /dev/null +++ b/Documentation/virt/kvm/s390/s390-diag.rst @@ -0,0 +1,119 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +The s390 DIAGNOSE call on KVM +============================= + +KVM on s390 supports the DIAGNOSE call for making hypercalls, both for +native hypercalls and for selected hypercalls found on other s390 +hypervisors. + +Note that bits are numbered as by the usual s390 convention (most significant +bit on the left). + + +General remarks +--------------- + +DIAGNOSE calls by the guest cause a mandatory intercept. This implies +all supported DIAGNOSE calls need to be handled by either KVM or its +userspace. + +All DIAGNOSE calls supported by KVM use the RS-a format:: + + -------------------------------------- + | '83' | R1 | R3 | B2 | D2 | + -------------------------------------- + 0 8 12 16 20 31 + +The second-operand address (obtained by the base/displacement calculation) +is not used to address data. Instead, bits 48-63 of this address specify +the function code, and bits 0-47 are ignored. + +The supported DIAGNOSE function codes vary by the userspace used. For +DIAGNOSE function codes not specific to KVM, please refer to the +documentation for the s390 hypervisors defining them. + + +DIAGNOSE function code 'X'500' - KVM virtio functions +----------------------------------------------------- + +If the function code specifies 0x500, various virtio-related functions +are performed. + +General register 1 contains the virtio subfunction code. Supported +virtio subfunctions depend on KVM's userspace. Generally, userspace +provides either s390-virtio (subcodes 0-2) or virtio-ccw (subcode 3). + +Upon completion of the DIAGNOSE instruction, general register 2 contains +the function's return code, which is either a return code or a subcode +specific value. + +Subcode 0 - s390-virtio notification and early console printk + Handled by userspace. + +Subcode 1 - s390-virtio reset + Handled by userspace. + +Subcode 2 - s390-virtio set status + Handled by userspace. + +Subcode 3 - virtio-ccw notification + Handled by either userspace or KVM (ioeventfd case). + + General register 2 contains a subchannel-identification word denoting + the subchannel of the virtio-ccw proxy device to be notified. + + General register 3 contains the number of the virtqueue to be notified. + + General register 4 contains a 64bit identifier for KVM usage (the + kvm_io_bus cookie). If general register 4 does not contain a valid + identifier, it is ignored. + + After completion of the DIAGNOSE call, general register 2 may contain + a 64bit identifier (in the kvm_io_bus cookie case), or a negative + error value, if an internal error occurred. + + See also the virtio standard for a discussion of this hypercall. + + +DIAGNOSE function code 'X'501 - KVM breakpoint +---------------------------------------------- + +If the function code specifies 0x501, breakpoint functions may be performed. +This function code is handled by userspace. + +This diagnose function code has no subfunctions and uses no parameters. + + +DIAGNOSE function code 'X'9C - Voluntary Time Slice Yield +--------------------------------------------------------- + +General register 1 contains the target CPU address. + +In a guest of a hypervisor like LPAR, KVM or z/VM using shared host CPUs, +DIAGNOSE with function code 0x9c may improve system performance by +yielding the host CPU on which the guest CPU is running to be assigned +to another guest CPU, preferably the logical CPU containing the specified +target CPU. + + +DIAG 'X'9C forwarding ++++++++++++++++++++++ + +The guest may send a DIAGNOSE 0x9c in order to yield to a certain +other vcpu. An example is a Linux guest that tries to yield to the vcpu +that is currently holding a spinlock, but not running. + +However, on the host the real cpu backing the vcpu may itself not be +running. +Forwarding the DIAGNOSE 0x9c initially sent by the guest to yield to +the backing cpu will hopefully cause that cpu, and thus subsequently +the guest's vcpu, to be scheduled. + + +diag9c_forwarding_hz + KVM kernel parameter allowing to specify the maximum number of DIAGNOSE + 0x9c forwarding per second in the purpose of avoiding a DIAGNOSE 0x9c + forwarding storm. + A value of 0 turns the forwarding off. diff --git a/Documentation/virt/kvm/s390/s390-pv-boot.rst b/Documentation/virt/kvm/s390/s390-pv-boot.rst new file mode 100644 index 0000000000..96c48480a3 --- /dev/null +++ b/Documentation/virt/kvm/s390/s390-pv-boot.rst @@ -0,0 +1,84 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +s390 (IBM Z) Boot/IPL of Protected VMs +====================================== + +Summary +------- +The memory of Protected Virtual Machines (PVMs) is not accessible to +I/O or the hypervisor. In those cases where the hypervisor needs to +access the memory of a PVM, that memory must be made accessible. +Memory made accessible to the hypervisor will be encrypted. See +Documentation/virt/kvm/s390/s390-pv.rst for details." + +On IPL (boot) a small plaintext bootloader is started, which provides +information about the encrypted components and necessary metadata to +KVM to decrypt the protected virtual machine. + +Based on this data, KVM will make the protected virtual machine known +to the Ultravisor (UV) and instruct it to secure the memory of the +PVM, decrypt the components and verify the data and address list +hashes, to ensure integrity. Afterwards KVM can run the PVM via the +SIE instruction which the UV will intercept and execute on KVM's +behalf. + +As the guest image is just like an opaque kernel image that does the +switch into PV mode itself, the user can load encrypted guest +executables and data via every available method (network, dasd, scsi, +direct kernel, ...) without the need to change the boot process. + + +Diag308 +------- +This diagnose instruction is the basic mechanism to handle IPL and +related operations for virtual machines. The VM can set and retrieve +IPL information blocks, that specify the IPL method/devices and +request VM memory and subsystem resets, as well as IPLs. + +For PVMs this concept has been extended with new subcodes: + +Subcode 8: Set an IPL Information Block of type 5 (information block +for PVMs) +Subcode 9: Store the saved block in guest memory +Subcode 10: Move into Protected Virtualization mode + +The new PV load-device-specific-parameters field specifies all data +that is necessary to move into PV mode. + +* PV Header origin +* PV Header length +* List of Components composed of + * AES-XTS Tweak prefix + * Origin + * Size + +The PV header contains the keys and hashes, which the UV will use to +decrypt and verify the PV, as well as control flags and a start PSW. + +The components are for instance an encrypted kernel, kernel parameters +and initrd. The components are decrypted by the UV. + +After the initial import of the encrypted data, all defined pages will +contain the guest content. All non-specified pages will start out as +zero pages on first access. + + +When running in protected virtualization mode, some subcodes will result in +exceptions or return error codes. + +Subcodes 4 and 7, which specify operations that do not clear the guest +memory, will result in specification exceptions. This is because the +UV will clear all memory when a secure VM is removed, and therefore +non-clearing IPL subcodes are not allowed. + +Subcodes 8, 9, 10 will result in specification exceptions. +Re-IPL into a protected mode is only possible via a detour into non +protected mode. + +Keys +---- +Every CEC will have a unique public key to enable tooling to build +encrypted images. +See `s390-tools <https://github.com/ibm-s390-linux/s390-tools/>`_ +for the tooling. diff --git a/Documentation/virt/kvm/s390/s390-pv-dump.rst b/Documentation/virt/kvm/s390/s390-pv-dump.rst new file mode 100644 index 0000000000..e542f06048 --- /dev/null +++ b/Documentation/virt/kvm/s390/s390-pv-dump.rst @@ -0,0 +1,64 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +s390 (IBM Z) Protected Virtualization dumps +=========================================== + +Summary +------- + +Dumping a VM is an essential tool for debugging problems inside +it. This is especially true when a protected VM runs into trouble as +there's no way to access its memory and registers from the outside +while it's running. + +However when dumping a protected VM we need to maintain its +confidentiality until the dump is in the hands of the VM owner who +should be the only one capable of analysing it. + +The confidentiality of the VM dump is ensured by the Ultravisor who +provides an interface to KVM over which encrypted CPU and memory data +can be requested. The encryption is based on the Customer +Communication Key which is the key that's used to encrypt VM data in a +way that the customer is able to decrypt. + + +Dump process +------------ + +A dump is done in 3 steps: + +**Initiation** + +This step initializes the dump process, generates cryptographic seeds +and extracts dump keys with which the VM dump data will be encrypted. + +**Data gathering** + +Currently there are two types of data that can be gathered from a VM: +the memory and the vcpu state. + +The vcpu state contains all the important registers, general, floating +point, vector, control and tod/timers of a vcpu. The vcpu dump can +contain incomplete data if a vcpu is dumped while an instruction is +emulated with help of the hypervisor. This is indicated by a flag bit +in the dump data. For the same reason it is very important to not only +write out the encrypted vcpu state, but also the unencrypted state +from the hypervisor. + +The memory state is further divided into the encrypted memory and its +metadata comprised of the encryption tweaks and status flags. The +encrypted memory can simply be read once it has been exported. The +time of the export does not matter as no re-encryption is +needed. Memory that has been swapped out and hence was exported can be +read from the swap and written to the dump target without need for any +special actions. + +The tweaks / status flags for the exported pages need to be requested +from the Ultravisor. + +**Finalization** + +The finalization step will provide the data needed to be able to +decrypt the vcpu and memory data and end the dump process. When this +step completes successfully a new dump initiation can be started. diff --git a/Documentation/virt/kvm/s390/s390-pv.rst b/Documentation/virt/kvm/s390/s390-pv.rst new file mode 100644 index 0000000000..8e41a3b63f --- /dev/null +++ b/Documentation/virt/kvm/s390/s390-pv.rst @@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================= +s390 (IBM Z) Ultravisor and Protected VMs +========================================= + +Summary +------- +Protected virtual machines (PVM) are KVM VMs that do not allow KVM to +access VM state like guest memory or guest registers. Instead, the +PVMs are mostly managed by a new entity called Ultravisor (UV). The UV +provides an API that can be used by PVMs and KVM to request management +actions. + +Each guest starts in non-protected mode and then may make a request to +transition into protected mode. On transition, KVM registers the guest +and its VCPUs with the Ultravisor and prepares everything for running +it. + +The Ultravisor will secure and decrypt the guest's boot memory +(i.e. kernel/initrd). It will safeguard state changes like VCPU +starts/stops and injected interrupts while the guest is running. + +As access to the guest's state, such as the SIE state description, is +normally needed to be able to run a VM, some changes have been made in +the behavior of the SIE instruction. A new format 4 state description +has been introduced, where some fields have different meanings for a +PVM. SIE exits are minimized as much as possible to improve speed and +reduce exposed guest state. + + +Interrupt injection +------------------- +Interrupt injection is safeguarded by the Ultravisor. As KVM doesn't +have access to the VCPUs' lowcores, injection is handled via the +format 4 state description. + +Machine check, external, IO and restart interruptions each can be +injected on SIE entry via a bit in the interrupt injection control +field (offset 0x54). If the guest cpu is not enabled for the interrupt +at the time of injection, a validity interception is recognized. The +format 4 state description contains fields in the interception data +block where data associated with the interrupt can be transported. + +Program and Service Call exceptions have another layer of +safeguarding; they can only be injected for instructions that have +been intercepted into KVM. The exceptions need to be a valid outcome +of an instruction emulation by KVM, e.g. we can never inject a +addressing exception as they are reported by SIE since KVM has no +access to the guest memory. + + +Mask notification interceptions +------------------------------- +KVM cannot intercept lctl(g) and lpsw(e) anymore in order to be +notified when a PVM enables a certain class of interrupt. As a +replacement, two new interception codes have been introduced: One +indicating that the contents of CRs 0, 6, or 14 have been changed, +indicating different interruption subclasses; and one indicating that +PSW bit 13 has been changed, indicating that a machine check +intervention was requested and those are now enabled. + +Instruction emulation +--------------------- +With the format 4 state description for PVMs, the SIE instruction already +interprets more instructions than it does with format 2. It is not able +to interpret every instruction, but needs to hand some tasks to KVM; +therefore, the SIE and the ultravisor safeguard emulation inputs and outputs. + +The control structures associated with SIE provide the Secure +Instruction Data Area (SIDA), the Interception Parameters (IP) and the +Secure Interception General Register Save Area. Guest GRs and most of +the instruction data, such as I/O data structures, are filtered. +Instruction data is copied to and from the SIDA when needed. Guest +GRs are put into / retrieved from the Secure Interception General +Register Save Area. + +Only GR values needed to emulate an instruction will be copied into this +save area and the real register numbers will be hidden. + +The Interception Parameters state description field still contains +the bytes of the instruction text, but with pre-set register values +instead of the actual ones. I.e. each instruction always uses the same +instruction text, in order not to leak guest instruction text. +This also implies that the register content that a guest had in r<n> +may be in r<m> from the hypervisor's point of view. + +The Secure Instruction Data Area contains instruction storage +data. Instruction data, i.e. data being referenced by an instruction +like the SCCB for sclp, is moved via the SIDA. When an instruction is +intercepted, the SIE will only allow data and program interrupts for +this instruction to be moved to the guest via the two data areas +discussed before. Other data is either ignored or results in validity +interceptions. + + +Instruction emulation interceptions +----------------------------------- +There are two types of SIE secure instruction intercepts: the normal +and the notification type. Normal secure instruction intercepts will +make the guest pending for instruction completion of the intercepted +instruction type, i.e. on SIE entry it is attempted to complete +emulation of the instruction with the data provided by KVM. That might +be a program exception or instruction completion. + +The notification type intercepts inform KVM about guest environment +changes due to guest instruction interpretation. Such an interception +is recognized, for example, for the store prefix instruction to provide +the new lowcore location. On SIE reentry, any KVM data in the data areas +is ignored and execution continues as if the guest instruction had +completed. For that reason KVM is not allowed to inject a program +interrupt. + +Links +----- +`KVM Forum 2019 presentation <https://static.sched.com/hosted_files/kvmforum2019/3b/ibm_protected_vms_s390x.pdf>`_ diff --git a/Documentation/virt/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst new file mode 100644 index 0000000000..06718b9bc9 --- /dev/null +++ b/Documentation/virt/kvm/vcpu-requests.rst @@ -0,0 +1,294 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +KVM VCPU Requests +================= + +Overview +======== + +KVM supports an internal API enabling threads to request a VCPU thread to +perform some activity. For example, a thread may request a VCPU to flush +its TLB with a VCPU request. The API consists of the following functions:: + + /* Check if any requests are pending for VCPU @vcpu. */ + bool kvm_request_pending(struct kvm_vcpu *vcpu); + + /* Check if VCPU @vcpu has request @req pending. */ + bool kvm_test_request(int req, struct kvm_vcpu *vcpu); + + /* Clear request @req for VCPU @vcpu. */ + void kvm_clear_request(int req, struct kvm_vcpu *vcpu); + + /* + * Check if VCPU @vcpu has request @req pending. When the request is + * pending it will be cleared and a memory barrier, which pairs with + * another in kvm_make_request(), will be issued. + */ + bool kvm_check_request(int req, struct kvm_vcpu *vcpu); + + /* + * Make request @req of VCPU @vcpu. Issues a memory barrier, which pairs + * with another in kvm_check_request(), prior to setting the request. + */ + void kvm_make_request(int req, struct kvm_vcpu *vcpu); + + /* Make request @req of all VCPUs of the VM with struct kvm @kvm. */ + bool kvm_make_all_cpus_request(struct kvm *kvm, unsigned int req); + +Typically a requester wants the VCPU to perform the activity as soon +as possible after making the request. This means most requests +(kvm_make_request() calls) are followed by a call to kvm_vcpu_kick(), +and kvm_make_all_cpus_request() has the kicking of all VCPUs built +into it. + +VCPU Kicks +---------- + +The goal of a VCPU kick is to bring a VCPU thread out of guest mode in +order to perform some KVM maintenance. To do so, an IPI is sent, forcing +a guest mode exit. However, a VCPU thread may not be in guest mode at the +time of the kick. Therefore, depending on the mode and state of the VCPU +thread, there are two other actions a kick may take. All three actions +are listed below: + +1) Send an IPI. This forces a guest mode exit. +2) Waking a sleeping VCPU. Sleeping VCPUs are VCPU threads outside guest + mode that wait on waitqueues. Waking them removes the threads from + the waitqueues, allowing the threads to run again. This behavior + may be suppressed, see KVM_REQUEST_NO_WAKEUP below. +3) Nothing. When the VCPU is not in guest mode and the VCPU thread is not + sleeping, then there is nothing to do. + +VCPU Mode +--------- + +VCPUs have a mode state, ``vcpu->mode``, that is used to track whether the +guest is running in guest mode or not, as well as some specific +outside guest mode states. The architecture may use ``vcpu->mode`` to +ensure VCPU requests are seen by VCPUs (see "Ensuring Requests Are Seen"), +as well as to avoid sending unnecessary IPIs (see "IPI Reduction"), and +even to ensure IPI acknowledgements are waited upon (see "Waiting for +Acknowledgements"). The following modes are defined: + +OUTSIDE_GUEST_MODE + + The VCPU thread is outside guest mode. + +IN_GUEST_MODE + + The VCPU thread is in guest mode. + +EXITING_GUEST_MODE + + The VCPU thread is transitioning from IN_GUEST_MODE to + OUTSIDE_GUEST_MODE. + +READING_SHADOW_PAGE_TABLES + + The VCPU thread is outside guest mode, but it wants the sender of + certain VCPU requests, namely KVM_REQ_TLB_FLUSH, to wait until the VCPU + thread is done reading the page tables. + +VCPU Request Internals +====================== + +VCPU requests are simply bit indices of the ``vcpu->requests`` bitmap. +This means general bitops, like those documented in [atomic-ops]_ could +also be used, e.g. :: + + clear_bit(KVM_REQ_UNBLOCK & KVM_REQUEST_MASK, &vcpu->requests); + +However, VCPU request users should refrain from doing so, as it would +break the abstraction. The first 8 bits are reserved for architecture +independent requests; all additional bits are available for architecture +dependent requests. + +Architecture Independent Requests +--------------------------------- + +KVM_REQ_TLB_FLUSH + + KVM's common MMU notifier may need to flush all of a guest's TLB + entries, calling kvm_flush_remote_tlbs() to do so. Architectures that + choose to use the common kvm_flush_remote_tlbs() implementation will + need to handle this VCPU request. + +KVM_REQ_VM_DEAD + + This request informs all VCPUs that the VM is dead and unusable, e.g. due to + fatal error or because the VM's state has been intentionally destroyed. + +KVM_REQ_UNBLOCK + + This request informs the vCPU to exit kvm_vcpu_block. It is used for + example from timer handlers that run on the host on behalf of a vCPU, + or in order to update the interrupt routing and ensure that assigned + devices will wake up the vCPU. + +KVM_REQ_OUTSIDE_GUEST_MODE + + This "request" ensures the target vCPU has exited guest mode prior to the + sender of the request continuing on. No action needs be taken by the target, + and so no request is actually logged for the target. This request is similar + to a "kick", but unlike a kick it guarantees the vCPU has actually exited + guest mode. A kick only guarantees the vCPU will exit at some point in the + future, e.g. a previous kick may have started the process, but there's no + guarantee the to-be-kicked vCPU has fully exited guest mode. + +KVM_REQUEST_MASK +---------------- + +VCPU requests should be masked by KVM_REQUEST_MASK before using them with +bitops. This is because only the lower 8 bits are used to represent the +request's number. The upper bits are used as flags. Currently only two +flags are defined. + +VCPU Request Flags +------------------ + +KVM_REQUEST_NO_WAKEUP + + This flag is applied to requests that only need immediate attention + from VCPUs running in guest mode. That is, sleeping VCPUs do not need + to be awakened for these requests. Sleeping VCPUs will handle the + requests when they are awakened later for some other reason. + +KVM_REQUEST_WAIT + + When requests with this flag are made with kvm_make_all_cpus_request(), + then the caller will wait for each VCPU to acknowledge its IPI before + proceeding. This flag only applies to VCPUs that would receive IPIs. + If, for example, the VCPU is sleeping, so no IPI is necessary, then + the requesting thread does not wait. This means that this flag may be + safely combined with KVM_REQUEST_NO_WAKEUP. See "Waiting for + Acknowledgements" for more information about requests with + KVM_REQUEST_WAIT. + +VCPU Requests with Associated State +=================================== + +Requesters that want the receiving VCPU to handle new state need to ensure +the newly written state is observable to the receiving VCPU thread's CPU +by the time it observes the request. This means a write memory barrier +must be inserted after writing the new state and before setting the VCPU +request bit. Additionally, on the receiving VCPU thread's side, a +corresponding read barrier must be inserted after reading the request bit +and before proceeding to read the new state associated with it. See +scenario 3, Message and Flag, of [lwn-mb]_ and the kernel documentation +[memory-barriers]_. + +The pair of functions, kvm_check_request() and kvm_make_request(), provide +the memory barriers, allowing this requirement to be handled internally by +the API. + +Ensuring Requests Are Seen +========================== + +When making requests to VCPUs, we want to avoid the receiving VCPU +executing in guest mode for an arbitrary long time without handling the +request. We can be sure this won't happen as long as we ensure the VCPU +thread checks kvm_request_pending() before entering guest mode and that a +kick will send an IPI to force an exit from guest mode when necessary. +Extra care must be taken to cover the period after the VCPU thread's last +kvm_request_pending() check and before it has entered guest mode, as kick +IPIs will only trigger guest mode exits for VCPU threads that are in guest +mode or at least have already disabled interrupts in order to prepare to +enter guest mode. This means that an optimized implementation (see "IPI +Reduction") must be certain when it's safe to not send the IPI. One +solution, which all architectures except s390 apply, is to: + +- set ``vcpu->mode`` to IN_GUEST_MODE between disabling the interrupts and + the last kvm_request_pending() check; +- enable interrupts atomically when entering the guest. + +This solution also requires memory barriers to be placed carefully in both +the requesting thread and the receiving VCPU. With the memory barriers we +can exclude the possibility of a VCPU thread observing +!kvm_request_pending() on its last check and then not receiving an IPI for +the next request made of it, even if the request is made immediately after +the check. This is done by way of the Dekker memory barrier pattern +(scenario 10 of [lwn-mb]_). As the Dekker pattern requires two variables, +this solution pairs ``vcpu->mode`` with ``vcpu->requests``. Substituting +them into the pattern gives:: + + CPU1 CPU2 + ================= ================= + local_irq_disable(); + WRITE_ONCE(vcpu->mode, IN_GUEST_MODE); kvm_make_request(REQ, vcpu); + smp_mb(); smp_mb(); + if (kvm_request_pending(vcpu)) { if (READ_ONCE(vcpu->mode) == + IN_GUEST_MODE) { + ...abort guest entry... ...send IPI... + } } + +As stated above, the IPI is only useful for VCPU threads in guest mode or +that have already disabled interrupts. This is why this specific case of +the Dekker pattern has been extended to disable interrupts before setting +``vcpu->mode`` to IN_GUEST_MODE. WRITE_ONCE() and READ_ONCE() are used to +pedantically implement the memory barrier pattern, guaranteeing the +compiler doesn't interfere with ``vcpu->mode``'s carefully planned +accesses. + +IPI Reduction +------------- + +As only one IPI is needed to get a VCPU to check for any/all requests, +then they may be coalesced. This is easily done by having the first IPI +sending kick also change the VCPU mode to something !IN_GUEST_MODE. The +transitional state, EXITING_GUEST_MODE, is used for this purpose. + +Waiting for Acknowledgements +---------------------------- + +Some requests, those with the KVM_REQUEST_WAIT flag set, require IPIs to +be sent, and the acknowledgements to be waited upon, even when the target +VCPU threads are in modes other than IN_GUEST_MODE. For example, one case +is when a target VCPU thread is in READING_SHADOW_PAGE_TABLES mode, which +is set after disabling interrupts. To support these cases, the +KVM_REQUEST_WAIT flag changes the condition for sending an IPI from +checking that the VCPU is IN_GUEST_MODE to checking that it is not +OUTSIDE_GUEST_MODE. + +Request-less VCPU Kicks +----------------------- + +As the determination of whether or not to send an IPI depends on the +two-variable Dekker memory barrier pattern, then it's clear that +request-less VCPU kicks are almost never correct. Without the assurance +that a non-IPI generating kick will still result in an action by the +receiving VCPU, as the final kvm_request_pending() check does for +request-accompanying kicks, then the kick may not do anything useful at +all. If, for instance, a request-less kick was made to a VCPU that was +just about to set its mode to IN_GUEST_MODE, meaning no IPI is sent, then +the VCPU thread may continue its entry without actually having done +whatever it was the kick was meant to initiate. + +One exception is x86's posted interrupt mechanism. In this case, however, +even the request-less VCPU kick is coupled with the same +local_irq_disable() + smp_mb() pattern described above; the ON bit +(Outstanding Notification) in the posted interrupt descriptor takes the +role of ``vcpu->requests``. When sending a posted interrupt, PIR.ON is +set before reading ``vcpu->mode``; dually, in the VCPU thread, +vmx_sync_pir_to_irr() reads PIR after setting ``vcpu->mode`` to +IN_GUEST_MODE. + +Additional Considerations +========================= + +Sleeping VCPUs +-------------- + +VCPU threads may need to consider requests before and/or after calling +functions that may put them to sleep, e.g. kvm_vcpu_block(). Whether they +do or not, and, if they do, which requests need consideration, is +architecture dependent. kvm_vcpu_block() calls kvm_arch_vcpu_runnable() +to check if it should awaken. One reason to do so is to provide +architectures a function where requests may be checked if necessary. + +References +========== + +.. [atomic-ops] Documentation/atomic_bitops.txt and Documentation/atomic_t.txt +.. [memory-barriers] Documentation/memory-barriers.txt +.. [lwn-mb] https://lwn.net/Articles/573436/ diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst new file mode 100644 index 0000000000..995780088e --- /dev/null +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -0,0 +1,446 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Secure Encrypted Virtualization (SEV) +====================================== + +Overview +======== + +Secure Encrypted Virtualization (SEV) is a feature found on AMD processors. + +SEV is an extension to the AMD-V architecture which supports running +virtual machines (VMs) under the control of a hypervisor. When enabled, +the memory contents of a VM will be transparently encrypted with a key +unique to that VM. + +The hypervisor can determine the SEV support through the CPUID +instruction. The CPUID function 0x8000001f reports information related +to SEV:: + + 0x8000001f[eax]: + Bit[1] indicates support for SEV + ... + [ecx]: + Bits[31:0] Number of encrypted guests supported simultaneously + +If support for SEV is present, MSR 0xc001_0010 (MSR_AMD64_SYSCFG) and MSR 0xc001_0015 +(MSR_K7_HWCR) can be used to determine if it can be enabled:: + + 0xc001_0010: + Bit[23] 1 = memory encryption can be enabled + 0 = memory encryption can not be enabled + + 0xc001_0015: + Bit[0] 1 = memory encryption can be enabled + 0 = memory encryption can not be enabled + +When SEV support is available, it can be enabled in a specific VM by +setting the SEV bit before executing VMRUN.:: + + VMCB[0x90]: + Bit[1] 1 = SEV is enabled + 0 = SEV is disabled + +SEV hardware uses ASIDs to associate a memory encryption key with a VM. +Hence, the ASID for the SEV-enabled guests must be from 1 to a maximum value +defined in the CPUID 0x8000001f[ecx] field. + +SEV Key Management +================== + +The SEV guest key management is handled by a separate processor called the AMD +Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure +key management interface to perform common hypervisor activities such as +encrypting bootstrap code, snapshot, migrating and debugging the guest. For more +information, see the SEV Key Management spec [api-spec]_ + +The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP. If the argument +to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled +and ``ENOTTY`` if it is disabled (on some older versions of Linux, +the ioctl runs normally even with a NULL argument, and therefore will +likely return ``EFAULT``). If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP +must be a struct kvm_sev_cmd:: + + struct kvm_sev_cmd { + __u32 id; + __u64 data; + __u32 error; + __u32 sev_fd; + }; + + +The ``id`` field contains the subcommand, and the ``data`` field points to +another struct containing arguments specific to command. The ``sev_fd`` +should point to a file descriptor that is opened on the ``/dev/sev`` +device, if needed (see individual commands). + +On output, ``error`` is zero on success, or an error code. Error codes +are defined in ``<linux/psp-dev.h>``. + +KVM implements the following commands to support common lifecycle events of SEV +guests, such as launching, running, snapshotting, migrating and decommissioning. + +1. KVM_SEV_INIT +--------------- + +The KVM_SEV_INIT command is used by the hypervisor to initialize the SEV platform +context. In a typical workflow, this command should be the first command issued. + +The firmware can be initialized either by using its own non-volatile storage or +the OS can manage the NV storage for the firmware using the module parameter +``init_ex_path``. If the file specified by ``init_ex_path`` does not exist or +is invalid, the OS will create or override the file with output from PSP. + +Returns: 0 on success, -negative on error + +2. KVM_SEV_LAUNCH_START +----------------------- + +The KVM_SEV_LAUNCH_START command is used for creating the memory encryption +context. To create the encryption context, user must provide a guest policy, +the owner's public Diffie-Hellman (PDH) key and session information. + +Parameters: struct kvm_sev_launch_start (in/out) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_start { + __u32 handle; /* if zero then firmware creates a new handle */ + __u32 policy; /* guest's policy */ + + __u64 dh_uaddr; /* userspace address pointing to the guest owner's PDH key */ + __u32 dh_len; + + __u64 session_addr; /* userspace address which points to the guest session information */ + __u32 session_len; + }; + +On success, the 'handle' field contains a new handle and on error, a negative value. + +KVM_SEV_LAUNCH_START requires the ``sev_fd`` field to be valid. + +For more details, see SEV spec Section 6.2. + +3. KVM_SEV_LAUNCH_UPDATE_DATA +----------------------------- + +The KVM_SEV_LAUNCH_UPDATE_DATA is used for encrypting a memory region. It also +calculates a measurement of the memory contents. The measurement is a signature +of the memory contents that can be sent to the guest owner as an attestation +that the memory was encrypted correctly by the firmware. + +Parameters (in): struct kvm_sev_launch_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_update { + __u64 uaddr; /* userspace address to be encrypted (must be 16-byte aligned) */ + __u32 len; /* length of the data to be encrypted (must be 16-byte aligned) */ + }; + +For more details, see SEV spec Section 6.3. + +4. KVM_SEV_LAUNCH_MEASURE +------------------------- + +The KVM_SEV_LAUNCH_MEASURE command is used to retrieve the measurement of the +data encrypted by the KVM_SEV_LAUNCH_UPDATE_DATA command. The guest owner may +wait to provide the guest with confidential information until it can verify the +measurement. Since the guest owner knows the initial contents of the guest at +boot, the measurement can be verified by comparing it to what the guest owner +expects. + +If len is zero on entry, the measurement blob length is written to len and +uaddr is unused. + +Parameters (in): struct kvm_sev_launch_measure + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_measure { + __u64 uaddr; /* where to copy the measurement */ + __u32 len; /* length of measurement blob */ + }; + +For more details on the measurement verification flow, see SEV spec Section 6.4. + +5. KVM_SEV_LAUNCH_FINISH +------------------------ + +After completion of the launch flow, the KVM_SEV_LAUNCH_FINISH command can be +issued to make the guest ready for the execution. + +Returns: 0 on success, -negative on error + +6. KVM_SEV_GUEST_STATUS +----------------------- + +The KVM_SEV_GUEST_STATUS command is used to retrieve status information about a +SEV-enabled guest. + +Parameters (out): struct kvm_sev_guest_status + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_guest_status { + __u32 handle; /* guest handle */ + __u32 policy; /* guest policy */ + __u8 state; /* guest state (see enum below) */ + }; + +SEV guest state: + +:: + + enum { + SEV_STATE_INVALID = 0; + SEV_STATE_LAUNCHING, /* guest is currently being launched */ + SEV_STATE_SECRET, /* guest is being launched and ready to accept the ciphertext data */ + SEV_STATE_RUNNING, /* guest is fully launched and running */ + SEV_STATE_RECEIVING, /* guest is being migrated in from another SEV machine */ + SEV_STATE_SENDING /* guest is getting migrated out to another SEV machine */ + }; + +7. KVM_SEV_DBG_DECRYPT +---------------------- + +The KVM_SEV_DEBUG_DECRYPT command can be used by the hypervisor to request the +firmware to decrypt the data at the given memory region. + +Parameters (in): struct kvm_sev_dbg + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_dbg { + __u64 src_uaddr; /* userspace address of data to decrypt */ + __u64 dst_uaddr; /* userspace address of destination */ + __u32 len; /* length of memory region to decrypt */ + }; + +The command returns an error if the guest policy does not allow debugging. + +8. KVM_SEV_DBG_ENCRYPT +---------------------- + +The KVM_SEV_DEBUG_ENCRYPT command can be used by the hypervisor to request the +firmware to encrypt the data at the given memory region. + +Parameters (in): struct kvm_sev_dbg + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_dbg { + __u64 src_uaddr; /* userspace address of data to encrypt */ + __u64 dst_uaddr; /* userspace address of destination */ + __u32 len; /* length of memory region to encrypt */ + }; + +The command returns an error if the guest policy does not allow debugging. + +9. KVM_SEV_LAUNCH_SECRET +------------------------ + +The KVM_SEV_LAUNCH_SECRET command can be used by the hypervisor to inject secret +data after the measurement has been validated by the guest owner. + +Parameters (in): struct kvm_sev_launch_secret + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_secret { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the guest memory region where the secret should be injected */ + __u32 guest_len; + + __u64 trans_uaddr; /* the hypervisor memory region which contains the secret */ + __u32 trans_len; + }; + +10. KVM_SEV_GET_ATTESTATION_REPORT +---------------------------------- + +The KVM_SEV_GET_ATTESTATION_REPORT command can be used by the hypervisor to query the attestation +report containing the SHA-256 digest of the guest memory and VMSA passed through the KVM_SEV_LAUNCH +commands and signed with the PEK. The digest returned by the command should match the digest +used by the guest owner with the KVM_SEV_LAUNCH_MEASURE. + +If len is zero on entry, the measurement blob length is written to len and +uaddr is unused. + +Parameters (in): struct kvm_sev_attestation + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_attestation_report { + __u8 mnonce[16]; /* A random mnonce that will be placed in the report */ + + __u64 uaddr; /* userspace address where the report should be copied */ + __u32 len; + }; + +11. KVM_SEV_SEND_START +---------------------- + +The KVM_SEV_SEND_START command can be used by the hypervisor to create an +outgoing guest encryption context. + +If session_len is zero on entry, the length of the guest session information is +written to session_len and all other fields are not used. + +Parameters (in): struct kvm_sev_send_start + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_send_start { + __u32 policy; /* guest policy */ + + __u64 pdh_cert_uaddr; /* platform Diffie-Hellman certificate */ + __u32 pdh_cert_len; + + __u64 plat_certs_uaddr; /* platform certificate chain */ + __u32 plat_certs_len; + + __u64 amd_certs_uaddr; /* AMD certificate */ + __u32 amd_certs_len; + + __u64 session_uaddr; /* Guest session information */ + __u32 session_len; + }; + +12. KVM_SEV_SEND_UPDATE_DATA +---------------------------- + +The KVM_SEV_SEND_UPDATE_DATA command can be used by the hypervisor to encrypt the +outgoing guest memory region with the encryption context creating using +KVM_SEV_SEND_START. + +If hdr_len or trans_len are zero on entry, the length of the packet header and +transport region are written to hdr_len and trans_len respectively, and all +other fields are not used. + +Parameters (in): struct kvm_sev_send_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_send_update_data { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the source memory region to be encrypted */ + __u32 guest_len; + + __u64 trans_uaddr; /* the destination memory region */ + __u32 trans_len; + }; + +13. KVM_SEV_SEND_FINISH +------------------------ + +After completion of the migration flow, the KVM_SEV_SEND_FINISH command can be +issued by the hypervisor to delete the encryption context. + +Returns: 0 on success, -negative on error + +14. KVM_SEV_SEND_CANCEL +------------------------ + +After completion of SEND_START, but before SEND_FINISH, the source VMM can issue the +SEND_CANCEL command to stop a migration. This is necessary so that a cancelled +migration can restart with a new target later. + +Returns: 0 on success, -negative on error + +15. KVM_SEV_RECEIVE_START +------------------------- + +The KVM_SEV_RECEIVE_START command is used for creating the memory encryption +context for an incoming SEV guest. To create the encryption context, the user must +provide a guest policy, the platform public Diffie-Hellman (PDH) key and session +information. + +Parameters: struct kvm_sev_receive_start (in/out) + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_receive_start { + __u32 handle; /* if zero then firmware creates a new handle */ + __u32 policy; /* guest's policy */ + + __u64 pdh_uaddr; /* userspace address pointing to the PDH key */ + __u32 pdh_len; + + __u64 session_uaddr; /* userspace address which points to the guest session information */ + __u32 session_len; + }; + +On success, the 'handle' field contains a new handle and on error, a negative value. + +For more details, see SEV spec Section 6.12. + +16. KVM_SEV_RECEIVE_UPDATE_DATA +------------------------------- + +The KVM_SEV_RECEIVE_UPDATE_DATA command can be used by the hypervisor to copy +the incoming buffers into the guest memory region with encryption context +created during the KVM_SEV_RECEIVE_START. + +Parameters (in): struct kvm_sev_receive_update_data + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_launch_receive_update_data { + __u64 hdr_uaddr; /* userspace address containing the packet header */ + __u32 hdr_len; + + __u64 guest_uaddr; /* the destination guest memory region */ + __u32 guest_len; + + __u64 trans_uaddr; /* the incoming buffer memory region */ + __u32 trans_len; + }; + +17. KVM_SEV_RECEIVE_FINISH +-------------------------- + +After completion of the migration flow, the KVM_SEV_RECEIVE_FINISH command can be +issued by the hypervisor to make the guest ready for execution. + +Returns: 0 on success, -negative on error + +References +========== + + +See [white-paper]_, [api-spec]_, [amd-apm]_ and [kvm-forum]_ for more info. + +.. [white-paper] https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf +.. [api-spec] https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf +.. [amd-apm] https://support.amd.com/TechDocs/24593.pdf (section 15.34) +.. [kvm-forum] https://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf diff --git a/Documentation/virt/kvm/x86/cpuid.rst b/Documentation/virt/kvm/x86/cpuid.rst new file mode 100644 index 0000000000..bda3e3e737 --- /dev/null +++ b/Documentation/virt/kvm/x86/cpuid.rst @@ -0,0 +1,124 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +KVM CPUID bits +============== + +:Author: Glauber Costa <glommer@gmail.com> + +A guest running on a kvm host, can check some of its features using +cpuid. This is not always guaranteed to work, since userspace can +mask-out some, or even all KVM-related cpuid features before launching +a guest. + +KVM cpuid functions are: + +function: KVM_CPUID_SIGNATURE (0x40000000) + +returns:: + + eax = 0x40000001 + ebx = 0x4b4d564b + ecx = 0x564b4d56 + edx = 0x4d + +Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM". +The value in eax corresponds to the maximum cpuid function present in this leaf, +and will be updated if more functions are added in the future. +Note also that old hosts set eax value to 0x0. This should +be interpreted as if the value was 0x40000001. +This function queries the presence of KVM cpuid leafs. + +function: define KVM_CPUID_FEATURES (0x40000001) + +returns:: + + ebx, ecx + eax = an OR'ed group of (1 << flag) + +where ``flag`` is defined as below: + +================================== =========== ================================ +flag value meaning +================================== =========== ================================ +KVM_FEATURE_CLOCKSOURCE 0 kvmclock available at msrs + 0x11 and 0x12 + +KVM_FEATURE_NOP_IO_DELAY 1 not necessary to perform delays + on PIO operations + +KVM_FEATURE_MMU_OP 2 deprecated + +KVM_FEATURE_CLOCKSOURCE2 3 kvmclock available at msrs + 0x4b564d00 and 0x4b564d01 + +KVM_FEATURE_ASYNC_PF 4 async pf can be enabled by + writing to msr 0x4b564d02 + +KVM_FEATURE_STEAL_TIME 5 steal time can be enabled by + writing to msr 0x4b564d03 + +KVM_FEATURE_PV_EOI 6 paravirtualized end of interrupt + handler can be enabled by + writing to msr 0x4b564d04 + +KVM_FEATURE_PV_UNHALT 7 guest checks this feature bit + before enabling paravirtualized + spinlock support + +KVM_FEATURE_PV_TLB_FLUSH 9 guest checks this feature bit + before enabling paravirtualized + tlb flush + +KVM_FEATURE_ASYNC_PF_VMEXIT 10 paravirtualized async PF VM EXIT + can be enabled by setting bit 2 + when writing to msr 0x4b564d02 + +KVM_FEATURE_PV_SEND_IPI 11 guest checks this feature bit + before enabling paravirtualized + send IPIs + +KVM_FEATURE_POLL_CONTROL 12 host-side polling on HLT can + be disabled by writing + to msr 0x4b564d05. + +KVM_FEATURE_PV_SCHED_YIELD 13 guest checks this feature bit + before using paravirtualized + sched yield. + +KVM_FEATURE_ASYNC_PF_INT 14 guest checks this feature bit + before using the second async + pf control msr 0x4b564d06 and + async pf acknowledgment msr + 0x4b564d07. + +KVM_FEATURE_MSI_EXT_DEST_ID 15 guest checks this feature bit + before using extended destination + ID bits in MSI address bits 11-5. + +KVM_FEATURE_HC_MAP_GPA_RANGE 16 guest checks this feature bit before + using the map gpa range hypercall + to notify the page state change + +KVM_FEATURE_MIGRATION_CONTROL 17 guest checks this feature bit before + using MSR_KVM_MIGRATION_CONTROL + +KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24 host will warn if no guest-side + per-cpu warps are expected in + kvmclock +================================== =========== ================================ + +:: + + edx = an OR'ed group of (1 << flag) + +Where ``flag`` here is defined as below: + +================== ============ ================================= +flag value meaning +================== ============ ================================= +KVM_HINTS_REALTIME 0 guest checks this feature bit to + determine that vCPUs are never + preempted for an unlimited time + allowing optimizations +================== ============ ================================= diff --git a/Documentation/virt/kvm/x86/errata.rst b/Documentation/virt/kvm/x86/errata.rst new file mode 100644 index 0000000000..49a05f2474 --- /dev/null +++ b/Documentation/virt/kvm/x86/errata.rst @@ -0,0 +1,50 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +Known limitations of CPU virtualization +======================================= + +Whenever perfect emulation of a CPU feature is impossible or too hard, KVM +has to choose between not implementing the feature at all or introducing +behavioral differences between virtual machines and bare metal systems. + +This file documents some of the known limitations that KVM has in +virtualizing CPU features. + +x86 +=== + +``KVM_GET_SUPPORTED_CPUID`` issues +---------------------------------- + +x87 features +~~~~~~~~~~~~ + +Unlike most other CPUID feature bits, CPUID[EAX=7,ECX=0]:EBX[6] +(FDP_EXCPTN_ONLY) and CPUID[EAX=7,ECX=0]:EBX]13] (ZERO_FCS_FDS) are +clear if the features are present and set if the features are not present. + +Clearing these bits in CPUID has no effect on the operation of the guest; +if these bits are set on hardware, the features will not be present on +any virtual machine that runs on that hardware. + +**Workaround:** It is recommended to always set these bits in guest CPUID. +Note however that any software (e.g ``WIN87EM.DLL``) expecting these features +to be present likely predates these CPUID feature bits, and therefore +doesn't know to check for them anyway. + +Nested virtualization features +------------------------------ + +TBD + +x2APIC +------ +When KVM_X2APIC_API_USE_32BIT_IDS is enabled, KVM activates a hack/quirk that +allows sending events to a single vCPU using its x2APIC ID even if the target +vCPU has legacy xAPIC enabled, e.g. to bring up hotplugged vCPUs via INIT-SIPI +on VMs with > 255 vCPUs. A side effect of the quirk is that, if multiple vCPUs +have the same physical APIC ID, KVM will deliver events targeting that APIC ID +only to the vCPU with the lowest vCPU ID. If KVM_X2APIC_API_USE_32BIT_IDS is +not enabled, KVM follows x86 architecture when processing interrupts (all vCPUs +matching the target APIC ID receive the interrupt). diff --git a/Documentation/virt/kvm/x86/hypercalls.rst b/Documentation/virt/kvm/x86/hypercalls.rst new file mode 100644 index 0000000000..10db792472 --- /dev/null +++ b/Documentation/virt/kvm/x86/hypercalls.rst @@ -0,0 +1,192 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +Linux KVM Hypercall +=================== + +X86: + KVM Hypercalls have a three-byte sequence of either the vmcall or the vmmcall + instruction. The hypervisor can replace it with instructions that are + guaranteed to be supported. + + Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively. + The hypercall number should be placed in rax and the return value will be + placed in rax. No other registers will be clobbered unless explicitly stated + by the particular hypercall. + +S390: + R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall + number. The return value is written to R2. + + S390 uses diagnose instruction as hypercall (0x500) along with hypercall + number in R1. + + For further information on the S390 diagnose call as supported by KVM, + refer to Documentation/virt/kvm/s390/s390-diag.rst. + +PowerPC: + It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. + Return value is placed in R3. + + KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions' + property inside the device tree's /hypervisor node. + For more information refer to Documentation/virt/kvm/ppc-pv.rst + +MIPS: + KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall + number in $2 (v0). Up to four arguments may be placed in $4-$7 (a0-a3) and + the return value is placed in $2 (v0). + +KVM Hypercalls Documentation +============================ + +The template for each hypercall is: +1. Hypercall name. +2. Architecture(s) +3. Status (deprecated, obsolete, active) +4. Purpose + +1. KVM_HC_VAPIC_POLL_IRQ +------------------------ + +:Architecture: x86 +:Status: active +:Purpose: Trigger guest exit so that the host can check for pending + interrupts on reentry. + +2. KVM_HC_MMU_OP +---------------- + +:Architecture: x86 +:Status: deprecated. +:Purpose: Support MMU operations such as writing to PTE, + flushing TLB, release PT. + +3. KVM_HC_FEATURES +------------------ + +:Architecture: PPC +:Status: active +:Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid + used to enumerate which hypercalls are available. On PPC, either + device tree based lookup ( which is also what EPAPR dictates) + OR KVM specific enumeration mechanism (which is this hypercall) + can be used. + +4. KVM_HC_PPC_MAP_MAGIC_PAGE +---------------------------- + +:Architecture: PPC +:Status: active +:Purpose: To enable communication between the hypervisor and guest there is a + shared page that contains parts of supervisor visible register state. + The guest can map this shared page to access its supervisor register + through memory using this hypercall. + +5. KVM_HC_KICK_CPU +------------------ + +:Architecture: x86 +:Status: active +:Purpose: Hypercall used to wakeup a vcpu from HLT state +:Usage example: + A vcpu of a paravirtualized guest that is busywaiting in guest + kernel mode for an event to occur (ex: a spinlock to become available) can + execute HLT instruction once it has busy-waited for more than a threshold + time-interval. Execution of HLT instruction would cause the hypervisor to put + the vcpu to sleep until occurrence of an appropriate event. Another vcpu of the + same guest can wakeup the sleeping vcpu by issuing KVM_HC_KICK_CPU hypercall, + specifying APIC ID (a1) of the vcpu to be woken up. An additional argument (a0) + is used in the hypercall for future use. + + +6. KVM_HC_CLOCK_PAIRING +----------------------- +:Architecture: x86 +:Status: active +:Purpose: Hypercall used to synchronize host and guest clocks. + +Usage: + +a0: guest physical address where host copies +"struct kvm_clock_offset" structure. + +a1: clock_type, ATM only KVM_CLOCK_PAIRING_WALLCLOCK (0) +is supported (corresponding to the host's CLOCK_REALTIME clock). + + :: + + struct kvm_clock_pairing { + __s64 sec; + __s64 nsec; + __u64 tsc; + __u32 flags; + __u32 pad[9]; + }; + + Where: + * sec: seconds from clock_type clock. + * nsec: nanoseconds from clock_type clock. + * tsc: guest TSC value used to calculate sec/nsec pair + * flags: flags, unused (0) at the moment. + +The hypercall lets a guest compute a precise timestamp across +host and guest. The guest can use the returned TSC value to +compute the CLOCK_REALTIME for its clock, at the same instant. + +Returns KVM_EOPNOTSUPP if the host does not use TSC clocksource, +or if clock type is different than KVM_CLOCK_PAIRING_WALLCLOCK. + +6. KVM_HC_SEND_IPI +------------------ + +:Architecture: x86 +:Status: active +:Purpose: Send IPIs to multiple vCPUs. + +- a0: lower part of the bitmap of destination APIC IDs +- a1: higher part of the bitmap of destination APIC IDs +- a2: the lowest APIC ID in bitmap +- a3: APIC ICR + +The hypercall lets a guest send multicast IPIs, with at most 128 +128 destinations per hypercall in 64-bit mode and 64 vCPUs per +hypercall in 32-bit mode. The destinations are represented by a +bitmap contained in the first two arguments (a0 and a1). Bit 0 of +a0 corresponds to the APIC ID in the third argument (a2), bit 1 +corresponds to the APIC ID a2+1, and so on. + +Returns the number of CPUs to which the IPIs were delivered successfully. + +7. KVM_HC_SCHED_YIELD +--------------------- + +:Architecture: x86 +:Status: active +:Purpose: Hypercall used to yield if the IPI target vCPU is preempted + +a0: destination APIC ID + +:Usage example: When sending a call-function IPI-many to vCPUs, yield if + any of the IPI target vCPUs was preempted. + +8. KVM_HC_MAP_GPA_RANGE +------------------------- +:Architecture: x86 +:Status: active +:Purpose: Request KVM to map a GPA range with the specified attributes. + +a0: the guest physical address of the start page +a1: the number of (4kb) pages (must be contiguous in GPA space) +a2: attributes + + Where 'attributes' : + * bits 3:0 - preferred page size encoding 0 = 4kb, 1 = 2mb, 2 = 1gb, etc... + * bit 4 - plaintext = 0, encrypted = 1 + * bits 63:5 - reserved (must be zero) + +**Implementation note**: this hypercall is implemented in userspace via +the KVM_CAP_EXIT_HYPERCALL capability. Userspace must enable that capability +before advertising KVM_FEATURE_HC_MAP_GPA_RANGE in the guest CPUID. In +addition, if the guest supports KVM_FEATURE_MIGRATION_CONTROL, userspace +must also set up an MSR filter to process writes to MSR_KVM_MIGRATION_CONTROL. diff --git a/Documentation/virt/kvm/x86/index.rst b/Documentation/virt/kvm/x86/index.rst new file mode 100644 index 0000000000..9ece6b8dc8 --- /dev/null +++ b/Documentation/virt/kvm/x86/index.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +KVM for x86 systems +=================== + +.. toctree:: + :maxdepth: 2 + + amd-memory-encryption + cpuid + errata + hypercalls + mmu + msr + nested-vmx + running-nested-guests + timekeeping diff --git a/Documentation/virt/kvm/x86/mmu.rst b/Documentation/virt/kvm/x86/mmu.rst new file mode 100644 index 0000000000..d47595b33f --- /dev/null +++ b/Documentation/virt/kvm/x86/mmu.rst @@ -0,0 +1,484 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +The x86 kvm shadow mmu +====================== + +The mmu (in arch/x86/kvm, files mmu.[ch] and paging_tmpl.h) is responsible +for presenting a standard x86 mmu to the guest, while translating guest +physical addresses to host physical addresses. + +The mmu code attempts to satisfy the following requirements: + +- correctness: + the guest should not be able to determine that it is running + on an emulated mmu except for timing (we attempt to comply + with the specification, not emulate the characteristics of + a particular implementation such as tlb size) +- security: + the guest must not be able to touch host memory not assigned + to it +- performance: + minimize the performance penalty imposed by the mmu +- scaling: + need to scale to large memory and large vcpu guests +- hardware: + support the full range of x86 virtualization hardware +- integration: + Linux memory management code must be in control of guest memory + so that swapping, page migration, page merging, transparent + hugepages, and similar features work without change +- dirty tracking: + report writes to guest memory to enable live migration + and framebuffer-based displays +- footprint: + keep the amount of pinned kernel memory low (most memory + should be shrinkable) +- reliability: + avoid multipage or GFP_ATOMIC allocations + +Acronyms +======== + +==== ==================================================================== +pfn host page frame number +hpa host physical address +hva host virtual address +gfn guest frame number +gpa guest physical address +gva guest virtual address +ngpa nested guest physical address +ngva nested guest virtual address +pte page table entry (used also to refer generically to paging structure + entries) +gpte guest pte (referring to gfns) +spte shadow pte (referring to pfns) +tdp two dimensional paging (vendor neutral term for NPT and EPT) +==== ==================================================================== + +Virtual and real hardware supported +=================================== + +The mmu supports first-generation mmu hardware, which allows an atomic switch +of the current paging mode and cr3 during guest entry, as well as +two-dimensional paging (AMD's NPT and Intel's EPT). The emulated hardware +it exposes is the traditional 2/3/4 level x86 mmu, with support for global +pages, pae, pse, pse36, cr0.wp, and 1GB pages. Emulated hardware also +able to expose NPT capable hardware on NPT capable hosts. + +Translation +=========== + +The primary job of the mmu is to program the processor's mmu to translate +addresses for the guest. Different translations are required at different +times: + +- when guest paging is disabled, we translate guest physical addresses to + host physical addresses (gpa->hpa) +- when guest paging is enabled, we translate guest virtual addresses, to + guest physical addresses, to host physical addresses (gva->gpa->hpa) +- when the guest launches a guest of its own, we translate nested guest + virtual addresses, to nested guest physical addresses, to guest physical + addresses, to host physical addresses (ngva->ngpa->gpa->hpa) + +The primary challenge is to encode between 1 and 3 translations into hardware +that support only 1 (traditional) and 2 (tdp) translations. When the +number of required translations matches the hardware, the mmu operates in +direct mode; otherwise it operates in shadow mode (see below). + +Memory +====== + +Guest memory (gpa) is part of the user address space of the process that is +using kvm. Userspace defines the translation between guest addresses and user +addresses (gpa->hva); note that two gpas may alias to the same hva, but not +vice versa. + +These hvas may be backed using any method available to the host: anonymous +memory, file backed memory, and device memory. Memory might be paged by the +host at any time. + +Events +====== + +The mmu is driven by events, some from the guest, some from the host. + +Guest generated events: + +- writes to control registers (especially cr3) +- invlpg/invlpga instruction execution +- access to missing or protected translations + +Host generated events: + +- changes in the gpa->hpa translation (either through gpa->hva changes or + through hva->hpa changes) +- memory pressure (the shrinker) + +Shadow pages +============ + +The principal data structure is the shadow page, 'struct kvm_mmu_page'. A +shadow page contains 512 sptes, which can be either leaf or nonleaf sptes. A +shadow page may contain a mix of leaf and nonleaf sptes. + +A nonleaf spte allows the hardware mmu to reach the leaf pages and +is not related to a translation directly. It points to other shadow pages. + +A leaf spte corresponds to either one or two translations encoded into +one paging structure entry. These are always the lowest level of the +translation stack, with optional higher level translations left to NPT/EPT. +Leaf ptes point at guest pages. + +The following table shows translations encoded by leaf ptes, with higher-level +translations in parentheses: + + Non-nested guests:: + + nonpaging: gpa->hpa + paging: gva->gpa->hpa + paging, tdp: (gva->)gpa->hpa + + Nested guests:: + + non-tdp: ngva->gpa->hpa (*) + tdp: (ngva->)ngpa->gpa->hpa + + (*) the guest hypervisor will encode the ngva->gpa translation into its page + tables if npt is not present + +Shadow pages contain the following information: + role.level: + The level in the shadow paging hierarchy that this shadow page belongs to. + 1=4k sptes, 2=2M sptes, 3=1G sptes, etc. + role.direct: + If set, leaf sptes reachable from this page are for a linear range. + Examples include real mode translation, large guest pages backed by small + host pages, and gpa->hpa translations when NPT or EPT is active. + The linear range starts at (gfn << PAGE_SHIFT) and its size is determined + by role.level (2MB for first level, 1GB for second level, 0.5TB for third + level, 256TB for fourth level) + If clear, this page corresponds to a guest page table denoted by the gfn + field. + role.quadrant: + When role.has_4_byte_gpte=1, the guest uses 32-bit gptes while the host uses 64-bit + sptes. That means a guest page table contains more ptes than the host, + so multiple shadow pages are needed to shadow one guest page. + For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the + first or second 512-gpte block in the guest page table. For second-level + page tables, each 32-bit gpte is converted to two 64-bit sptes + (since each first-level guest page is shadowed by two first-level + shadow pages) so role.quadrant takes values in the range 0..3. Each + quadrant maps 1GB virtual address space. + role.access: + Inherited guest access permissions from the parent ptes in the form uwx. + Note execute permission is positive, not negative. + role.invalid: + The page is invalid and should not be used. It is a root page that is + currently pinned (by a cpu hardware register pointing to it); once it is + unpinned it will be destroyed. + role.has_4_byte_gpte: + Reflects the size of the guest PTE for which the page is valid, i.e. '0' + if direct map or 64-bit gptes are in use, '1' if 32-bit gptes are in use. + role.efer_nx: + Contains the value of efer.nx for which the page is valid. + role.cr0_wp: + Contains the value of cr0.wp for which the page is valid. + role.smep_andnot_wp: + Contains the value of cr4.smep && !cr0.wp for which the page is valid + (pages for which this is true are different from other pages; see the + treatment of cr0.wp=0 below). + role.smap_andnot_wp: + Contains the value of cr4.smap && !cr0.wp for which the page is valid + (pages for which this is true are different from other pages; see the + treatment of cr0.wp=0 below). + role.smm: + Is 1 if the page is valid in system management mode. This field + determines which of the kvm_memslots array was used to build this + shadow page; it is also used to go back from a struct kvm_mmu_page + to a memslot, through the kvm_memslots_for_spte_role macro and + __gfn_to_memslot. + role.ad_disabled: + Is 1 if the MMU instance cannot use A/D bits. EPT did not have A/D + bits before Haswell; shadow EPT page tables also cannot use A/D bits + if the L1 hypervisor does not enable them. + role.passthrough: + The page is not backed by a guest page table, but its first entry + points to one. This is set if NPT uses 5-level page tables (host + CR4.LA57=1) and is shadowing L1's 4-level NPT (L1 CR4.LA57=0). + gfn: + Either the guest page table containing the translations shadowed by this + page, or the base page frame for linear translations. See role.direct. + spt: + A pageful of 64-bit sptes containing the translations for this page. + Accessed by both kvm and hardware. + The page pointed to by spt will have its page->private pointing back + at the shadow page structure. + sptes in spt point either at guest pages, or at lower-level shadow pages. + Specifically, if sp1 and sp2 are shadow pages, then sp1->spt[n] may point + at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte. + The spt array forms a DAG structure with the shadow page as a node, and + guest pages as leaves. + gfns: + An array of 512 guest frame numbers, one for each present pte. Used to + perform a reverse map from a pte to a gfn. When role.direct is set, any + element of this array can be calculated from the gfn field when used, in + this case, the array of gfns is not allocated. See role.direct and gfn. + root_count: + A counter keeping track of how many hardware registers (guest cr3 or + pdptrs) are now pointing at the page. While this counter is nonzero, the + page cannot be destroyed. See role.invalid. + parent_ptes: + The reverse mapping for the pte/ptes pointing at this page's spt. If + parent_ptes bit 0 is zero, only one spte points at this page and + parent_ptes points at this single spte, otherwise, there exists multiple + sptes pointing at this page and (parent_ptes & ~0x1) points at a data + structure with a list of parent sptes. + unsync: + If true, then the translations in this page may not match the guest's + translation. This is equivalent to the state of the tlb when a pte is + changed but before the tlb entry is flushed. Accordingly, unsync ptes + are synchronized when the guest executes invlpg or flushes its tlb by + other means. Valid for leaf pages. + unsync_children: + How many sptes in the page point at pages that are unsync (or have + unsynchronized children). + unsync_child_bitmap: + A bitmap indicating which sptes in spt point (directly or indirectly) at + pages that may be unsynchronized. Used to quickly locate all unsynchronized + pages reachable from a given page. + clear_spte_count: + Only present on 32-bit hosts, where a 64-bit spte cannot be written + atomically. The reader uses this while running out of the MMU lock + to detect in-progress updates and retry them until the writer has + finished the write. + write_flooding_count: + A guest may write to a page table many times, causing a lot of + emulations if the page needs to be write-protected (see "Synchronized + and unsynchronized pages" below). Leaf pages can be unsynchronized + so that they do not trigger frequent emulation, but this is not + possible for non-leafs. This field counts the number of emulations + since the last time the page table was actually used; if emulation + is triggered too frequently on this page, KVM will unmap the page + to avoid emulation in the future. + +Reverse map +=========== + +The mmu maintains a reverse mapping whereby all ptes mapping a page can be +reached given its gfn. This is used, for example, when swapping out a page. + +Synchronized and unsynchronized pages +===================================== + +The guest uses two events to synchronize its tlb and page tables: tlb flushes +and page invalidations (invlpg). + +A tlb flush means that we need to synchronize all sptes reachable from the +guest's cr3. This is expensive, so we keep all guest page tables write +protected, and synchronize sptes to gptes when a gpte is written. + +A special case is when a guest page table is reachable from the current +guest cr3. In this case, the guest is obliged to issue an invlpg instruction +before using the translation. We take advantage of that by removing write +protection from the guest page, and allowing the guest to modify it freely. +We synchronize modified gptes when the guest invokes invlpg. This reduces +the amount of emulation we have to do when the guest modifies multiple gptes, +or when the a guest page is no longer used as a page table and is used for +random guest data. + +As a side effect we have to resynchronize all reachable unsynchronized shadow +pages on a tlb flush. + + +Reaction to events +================== + +- guest page fault (or npt page fault, or ept violation) + +This is the most complicated event. The cause of a page fault can be: + + - a true guest fault (the guest translation won't allow the access) (*) + - access to a missing translation + - access to a protected translation + - when logging dirty pages, memory is write protected + - synchronized shadow pages are write protected (*) + - access to untranslatable memory (mmio) + + (*) not applicable in direct mode + +Handling a page fault is performed as follows: + + - if the RSV bit of the error code is set, the page fault is caused by guest + accessing MMIO and cached MMIO information is available. + + - walk shadow page table + - check for valid generation number in the spte (see "Fast invalidation of + MMIO sptes" below) + - cache the information to vcpu->arch.mmio_gva, vcpu->arch.mmio_access and + vcpu->arch.mmio_gfn, and call the emulator + + - If both P bit and R/W bit of error code are set, this could possibly + be handled as a "fast page fault" (fixed without taking the MMU lock). See + the description in Documentation/virt/kvm/locking.rst. + + - if needed, walk the guest page tables to determine the guest translation + (gva->gpa or ngpa->gpa) + + - if permissions are insufficient, reflect the fault back to the guest + + - determine the host page + + - if this is an mmio request, there is no host page; cache the info to + vcpu->arch.mmio_gva, vcpu->arch.mmio_access and vcpu->arch.mmio_gfn + + - walk the shadow page table to find the spte for the translation, + instantiating missing intermediate page tables as necessary + + - If this is an mmio request, cache the mmio info to the spte and set some + reserved bit on the spte (see callers of kvm_mmu_set_mmio_spte_mask) + + - try to unsynchronize the page + + - if successful, we can let the guest continue and modify the gpte + + - emulate the instruction + + - if failed, unshadow the page and let the guest continue + + - update any translations that were modified by the instruction + +invlpg handling: + + - walk the shadow page hierarchy and drop affected translations + - try to reinstantiate the indicated translation in the hope that the + guest will use it in the near future + +Guest control register updates: + +- mov to cr3 + + - look up new shadow roots + - synchronize newly reachable shadow pages + +- mov to cr0/cr4/efer + + - set up mmu context for new paging mode + - look up new shadow roots + - synchronize newly reachable shadow pages + +Host translation updates: + + - mmu notifier called with updated hva + - look up affected sptes through reverse map + - drop (or update) translations + +Emulating cr0.wp +================ + +If tdp is not enabled, the host must keep cr0.wp=1 so page write protection +works for the guest kernel, not guest userspace. When the guest +cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0, +we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the +semantics require allowing any guest kernel access plus user read access). + +We handle this by mapping the permissions to two possible sptes, depending +on fault type: + +- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access, + disallows user access) +- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel + write access) + +(user write faults generate a #PF) + +In the first case there are two additional complications: + +- if CR4.SMEP is enabled: since we've turned the page into a kernel page, + the kernel may now execute it. We handle this by also setting spte.nx. + If we get a user fetch or read fault, we'll change spte.u=1 and + spte.nx=gpte.nx back. For this to work, KVM forces EFER.NX to 1 when + shadow paging is in use. +- if CR4.SMAP is disabled: since the page has been changed to a kernel + page, it can not be reused when CR4.SMAP is enabled. We set + CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note, + here we do not care the case that CR4.SMAP is enabled since KVM will + directly inject #PF to guest due to failed permission check. + +To prevent an spte that was converted into a kernel page with cr0.wp=0 +from being written by the kernel after cr0.wp has changed to 1, we make +the value of cr0.wp part of the page role. This means that an spte created +with one value of cr0.wp cannot be used when cr0.wp has a different value - +it will simply be missed by the shadow page lookup code. A similar issue +exists when an spte created with cr0.wp=0 and cr4.smep=0 is used after +changing cr4.smep to 1. To avoid this, the value of !cr0.wp && cr4.smep +is also made a part of the page role. + +Large pages +=========== + +The mmu supports all combinations of large and small guest and host pages. +Supported page sizes include 4k, 2M, 4M, and 1G. 4M pages are treated as +two separate 2M pages, on both guest and host, since the mmu always uses PAE +paging. + +To instantiate a large spte, four constraints must be satisfied: + +- the spte must point to a large host page +- the guest pte must be a large pte of at least equivalent size (if tdp is + enabled, there is no guest pte and this condition is satisfied) +- if the spte will be writeable, the large page frame may not overlap any + write-protected pages +- the guest page must be wholly contained by a single memory slot + +To check the last two conditions, the mmu maintains a ->disallow_lpage set of +arrays for each memory slot and large page size. Every write protected page +causes its disallow_lpage to be incremented, thus preventing instantiation of +a large spte. The frames at the end of an unaligned memory slot have +artificially inflated ->disallow_lpages so they can never be instantiated. + +Fast invalidation of MMIO sptes +=============================== + +As mentioned in "Reaction to events" above, kvm will cache MMIO +information in leaf sptes. When a new memslot is added or an existing +memslot is changed, this information may become stale and needs to be +invalidated. This also needs to hold the MMU lock while walking all +shadow pages, and is made more scalable with a similar technique. + +MMIO sptes have a few spare bits, which are used to store a +generation number. The global generation number is stored in +kvm_memslots(kvm)->generation, and increased whenever guest memory info +changes. + +When KVM finds an MMIO spte, it checks the generation number of the spte. +If the generation number of the spte does not equal the global generation +number, it will ignore the cached MMIO information and handle the page +fault through the slow path. + +Since only 18 bits are used to store generation-number on mmio spte, all +pages are zapped when there is an overflow. + +Unfortunately, a single memory access might access kvm_memslots(kvm) multiple +times, the last one happening when the generation number is retrieved and +stored into the MMIO spte. Thus, the MMIO spte might be created based on +out-of-date information, but with an up-to-date generation number. + +To avoid this, the generation number is incremented again after synchronize_srcu +returns; thus, bit 63 of kvm_memslots(kvm)->generation set to 1 only during a +memslot update, while some SRCU readers might be using the old copy. We do not +want to use an MMIO sptes created with an odd generation number, and we can do +this without losing a bit in the MMIO spte. The "update in-progress" bit of the +generation is not stored in MMIO spte, and is so is implicitly zero when the +generation is extracted out of the spte. If KVM is unlucky and creates an MMIO +spte while an update is in-progress, the next access to the spte will always be +a cache miss. For example, a subsequent access during the update window will +miss due to the in-progress flag diverging, while an access after the update +window closes will have a higher generation number (as compared to the spte). + + +Further reading +=============== + +- NPT presentation from KVM Forum 2008 + https://www.linux-kvm.org/images/c/c8/KvmForum2008%24kdf2008_21.pdf diff --git a/Documentation/virt/kvm/x86/msr.rst b/Documentation/virt/kvm/x86/msr.rst new file mode 100644 index 0000000000..9315fc385f --- /dev/null +++ b/Documentation/virt/kvm/x86/msr.rst @@ -0,0 +1,391 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +KVM-specific MSRs +================= + +:Author: Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010 + +KVM makes use of some custom MSRs to service some requests. + +Custom MSRs have a range reserved for them, that goes from +0x4b564d00 to 0x4b564dff. There are MSRs outside this area, +but they are deprecated and their use is discouraged. + +Custom MSR list +--------------- + +The current supported Custom MSR list is: + +MSR_KVM_WALL_CLOCK_NEW: + 0x4b564d00 + +data: + 4-byte alignment physical address of a memory area which must be + in guest RAM. This memory is expected to hold a copy of the following + structure:: + + struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; + } __attribute__((__packed__)); + + whose data will be filled in by the hypervisor. The hypervisor is only + guaranteed to update this data at the moment of MSR write. + Users that want to reliably query this information more than once have + to write more than once to this MSR. Fields have the following meanings: + + version: + guest has to check version before and after grabbing + time information and check that they are both equal and even. + An odd version indicates an in-progress update. + + sec: + number of seconds for wallclock at time of boot. + + nsec: + number of nanoseconds for wallclock at time of boot. + + In order to get the current wallclock time, the system_time from + MSR_KVM_SYSTEM_TIME_NEW needs to be added. + + Note that although MSRs are per-CPU entities, the effect of this + particular MSR is global. + + Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid + leaf prior to usage. + +MSR_KVM_SYSTEM_TIME_NEW: + 0x4b564d01 + +data: + 4-byte aligned physical address of a memory area which must be in + guest RAM, plus an enable bit in bit 0. This memory is expected to hold + a copy of the following structure:: + + struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 flags; + u8 pad[2]; + } __attribute__((__packed__)); /* 32 bytes */ + + whose data will be filled in by the hypervisor periodically. Only one + write, or registration, is needed for each VCPU. The interval between + updates of this structure is arbitrary and implementation-dependent. + The hypervisor may update this structure at any time it sees fit until + anything with bit0 == 0 is written to it. + + Fields have the following meanings: + + version: + guest has to check version before and after grabbing + time information and check that they are both equal and even. + An odd version indicates an in-progress update. + + tsc_timestamp: + the tsc value at the current VCPU at the time + of the update of this structure. Guests can subtract this value + from current tsc to derive a notion of elapsed time since the + structure update. + + system_time: + a host notion of monotonic time, including sleep + time at the time this structure was last updated. Unit is + nanoseconds. + + tsc_to_system_mul: + multiplier to be used when converting + tsc-related quantity to nanoseconds + + tsc_shift: + shift to be used when converting tsc-related + quantity to nanoseconds. This shift will ensure that + multiplication with tsc_to_system_mul does not overflow. + A positive value denotes a left shift, a negative value + a right shift. + + The conversion from tsc to nanoseconds involves an additional + right shift by 32 bits. With this information, guests can + derive per-CPU time by doing:: + + time = (current_tsc - tsc_timestamp) + if (tsc_shift >= 0) + time <<= tsc_shift; + else + time >>= -tsc_shift; + time = (time * tsc_to_system_mul) >> 32 + time = time + system_time + + flags: + bits in this field indicate extended capabilities + coordinated between the guest and the hypervisor. Availability + of specific flags has to be checked in 0x40000001 cpuid leaf. + Current flags are: + + + +-----------+--------------+----------------------------------+ + | flag bit | cpuid bit | meaning | + +-----------+--------------+----------------------------------+ + | | | time measures taken across | + | 0 | 24 | multiple cpus are guaranteed to | + | | | be monotonic | + +-----------+--------------+----------------------------------+ + | | | guest vcpu has been paused by | + | 1 | N/A | the host | + | | | See 4.70 in api.txt | + +-----------+--------------+----------------------------------+ + + Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid + leaf prior to usage. + + +MSR_KVM_WALL_CLOCK: + 0x11 + +data and functioning: + same as MSR_KVM_WALL_CLOCK_NEW. Use that instead. + + This MSR falls outside the reserved KVM range and may be removed in the + future. Its usage is deprecated. + + Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid + leaf prior to usage. + +MSR_KVM_SYSTEM_TIME: + 0x12 + +data and functioning: + same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead. + + This MSR falls outside the reserved KVM range and may be removed in the + future. Its usage is deprecated. + + Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid + leaf prior to usage. + + The suggested algorithm for detecting kvmclock presence is then:: + + if (!kvm_para_available()) /* refer to cpuid.txt */ + return NON_PRESENT; + + flags = cpuid_eax(0x40000001); + if (flags & 3) { + msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW; + msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW; + return PRESENT; + } else if (flags & 0) { + msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; + msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; + return PRESENT; + } else + return NON_PRESENT; + +MSR_KVM_ASYNC_PF_EN: + 0x4b564d02 + +data: + Asynchronous page fault (APF) control MSR. + + Bits 63-6 hold 64-byte aligned physical address of a 64 byte memory area + which must be in guest RAM and must be zeroed. This memory is expected + to hold a copy of the following structure:: + + struct kvm_vcpu_pv_apf_data { + /* Used for 'page not present' events delivered via #PF */ + __u32 flags; + + /* Used for 'page ready' events delivered via interrupt notification */ + __u32 token; + + __u8 pad[56]; + __u32 enabled; + }; + + Bits 5-4 of the MSR are reserved and should be zero. Bit 0 is set to 1 + when asynchronous page faults are enabled on the vcpu, 0 when disabled. + Bit 1 is 1 if asynchronous page faults can be injected when vcpu is in + cpl == 0. Bit 2 is 1 if asynchronous page faults are delivered to L1 as + #PF vmexits. Bit 2 can be set only if KVM_FEATURE_ASYNC_PF_VMEXIT is + present in CPUID. Bit 3 enables interrupt based delivery of 'page ready' + events. Bit 3 can only be set if KVM_FEATURE_ASYNC_PF_INT is present in + CPUID. + + 'Page not present' events are currently always delivered as synthetic + #PF exception. During delivery of these events APF CR2 register contains + a token that will be used to notify the guest when missing page becomes + available. Also, to make it possible to distinguish between real #PF and + APF, first 4 bytes of 64 byte memory location ('flags') will be written + to by the hypervisor at the time of injection. Only first bit of 'flags' + is currently supported, when set, it indicates that the guest is dealing + with asynchronous 'page not present' event. If during a page fault APF + 'flags' is '0' it means that this is regular page fault. Guest is + supposed to clear 'flags' when it is done handling #PF exception so the + next event can be delivered. + + Note, since APF 'page not present' events use the same exception vector + as regular page fault, guest must reset 'flags' to '0' before it does + something that can generate normal page fault. + + Bytes 5-7 of 64 byte memory location ('token') will be written to by the + hypervisor at the time of APF 'page ready' event injection. The content + of these bytes is a token which was previously delivered as 'page not + present' event. The event indicates the page in now available. Guest is + supposed to write '0' to 'token' when it is done handling 'page ready' + event and to write 1' to MSR_KVM_ASYNC_PF_ACK after clearing the location; + writing to the MSR forces KVM to re-scan its queue and deliver the next + pending notification. + + Note, MSR_KVM_ASYNC_PF_INT MSR specifying the interrupt vector for 'page + ready' APF delivery needs to be written to before enabling APF mechanism + in MSR_KVM_ASYNC_PF_EN or interrupt #0 can get injected. The MSR is + available if KVM_FEATURE_ASYNC_PF_INT is present in CPUID. + + Note, previously, 'page ready' events were delivered via the same #PF + exception as 'page not present' events but this is now deprecated. If + bit 3 (interrupt based delivery) is not set APF events are not delivered. + + If APF is disabled while there are outstanding APFs, they will + not be delivered. + + Currently 'page ready' APF events will be always delivered on the + same vcpu as 'page not present' event was, but guest should not rely on + that. + +MSR_KVM_STEAL_TIME: + 0x4b564d03 + +data: + 64-byte alignment physical address of a memory area which must be + in guest RAM, plus an enable bit in bit 0. This memory is expected to + hold a copy of the following structure:: + + struct kvm_steal_time { + __u64 steal; + __u32 version; + __u32 flags; + __u8 preempted; + __u8 u8_pad[3]; + __u32 pad[11]; + } + + whose data will be filled in by the hypervisor periodically. Only one + write, or registration, is needed for each VCPU. The interval between + updates of this structure is arbitrary and implementation-dependent. + The hypervisor may update this structure at any time it sees fit until + anything with bit0 == 0 is written to it. Guest is required to make sure + this structure is initialized to zero. + + Fields have the following meanings: + + version: + a sequence counter. In other words, guest has to check + this field before and after grabbing time information and make + sure they are both equal and even. An odd version indicates an + in-progress update. + + flags: + At this point, always zero. May be used to indicate + changes in this structure in the future. + + steal: + the amount of time in which this vCPU did not run, in + nanoseconds. Time during which the vcpu is idle, will not be + reported as steal time. + + preempted: + indicate the vCPU who owns this struct is running or + not. Non-zero values mean the vCPU has been preempted. Zero + means the vCPU is not preempted. NOTE, it is always zero if the + the hypervisor doesn't support this field. + +MSR_KVM_EOI_EN: + 0x4b564d04 + +data: + Bit 0 is 1 when PV end of interrupt is enabled on the vcpu; 0 + when disabled. Bit 1 is reserved and must be zero. When PV end of + interrupt is enabled (bit 0 set), bits 63-2 hold a 4-byte aligned + physical address of a 4 byte memory area which must be in guest RAM and + must be zeroed. + + The first, least significant bit of 4 byte memory location will be + written to by the hypervisor, typically at the time of interrupt + injection. Value of 1 means that guest can skip writing EOI to the apic + (using MSR or MMIO write); instead, it is sufficient to signal + EOI by clearing the bit in guest memory - this location will + later be polled by the hypervisor. + Value of 0 means that the EOI write is required. + + It is always safe for the guest to ignore the optimization and perform + the APIC EOI write anyway. + + Hypervisor is guaranteed to only modify this least + significant bit while in the current VCPU context, this means that + guest does not need to use either lock prefix or memory ordering + primitives to synchronise with the hypervisor. + + However, hypervisor can set and clear this memory bit at any time: + therefore to make sure hypervisor does not interrupt the + guest and clear the least significant bit in the memory area + in the window between guest testing it to detect + whether it can skip EOI apic write and between guest + clearing it to signal EOI to the hypervisor, + guest must both read the least significant bit in the memory area and + clear it using a single CPU instruction, such as test and clear, or + compare and exchange. + +MSR_KVM_POLL_CONTROL: + 0x4b564d05 + + Control host-side polling. + +data: + Bit 0 enables (1) or disables (0) host-side HLT polling logic. + + KVM guests can request the host not to poll on HLT, for example if + they are performing polling themselves. + +MSR_KVM_ASYNC_PF_INT: + 0x4b564d06 + +data: + Second asynchronous page fault (APF) control MSR. + + Bits 0-7: APIC vector for delivery of 'page ready' APF events. + Bits 8-63: Reserved + + Interrupt vector for asynchnonous 'page ready' notifications delivery. + The vector has to be set up before asynchronous page fault mechanism + is enabled in MSR_KVM_ASYNC_PF_EN. The MSR is only available if + KVM_FEATURE_ASYNC_PF_INT is present in CPUID. + +MSR_KVM_ASYNC_PF_ACK: + 0x4b564d07 + +data: + Asynchronous page fault (APF) acknowledgment. + + When the guest is done processing 'page ready' APF event and 'token' + field in 'struct kvm_vcpu_pv_apf_data' is cleared it is supposed to + write '1' to bit 0 of the MSR, this causes the host to re-scan its queue + and check if there are more notifications pending. The MSR is available + if KVM_FEATURE_ASYNC_PF_INT is present in CPUID. + +MSR_KVM_MIGRATION_CONTROL: + 0x4b564d08 + +data: + This MSR is available if KVM_FEATURE_MIGRATION_CONTROL is present in + CPUID. Bit 0 represents whether live migration of the guest is allowed. + + When a guest is started, bit 0 will be 0 if the guest has encrypted + memory and 1 if the guest does not have encrypted memory. If the + guest is communicating page encryption status to the host using the + ``KVM_HC_MAP_GPA_RANGE`` hypercall, it can set bit 0 in this MSR to + allow live migration of the guest. diff --git a/Documentation/virt/kvm/x86/nested-vmx.rst b/Documentation/virt/kvm/x86/nested-vmx.rst new file mode 100644 index 0000000000..ac2095d41f --- /dev/null +++ b/Documentation/virt/kvm/x86/nested-vmx.rst @@ -0,0 +1,244 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +Nested VMX +========== + +Overview +--------- + +On Intel processors, KVM uses Intel's VMX (Virtual-Machine eXtensions) +to easily and efficiently run guest operating systems. Normally, these guests +*cannot* themselves be hypervisors running their own guests, because in VMX, +guests cannot use VMX instructions. + +The "Nested VMX" feature adds this missing capability - of running guest +hypervisors (which use VMX) with their own nested guests. It does so by +allowing a guest to use VMX instructions, and correctly and efficiently +emulating them using the single level of VMX available in the hardware. + +We describe in much greater detail the theory behind the nested VMX feature, +its implementation and its performance characteristics, in the OSDI 2010 paper +"The Turtles Project: Design and Implementation of Nested Virtualization", +available at: + + https://www.usenix.org/events/osdi10/tech/full_papers/Ben-Yehuda.pdf + + +Terminology +----------- + +Single-level virtualization has two levels - the host (KVM) and the guests. +In nested virtualization, we have three levels: The host (KVM), which we call +L0, the guest hypervisor, which we call L1, and its nested guest, which we +call L2. + + +Running nested VMX +------------------ + +The nested VMX feature is enabled by default since Linux kernel v4.20. For +older Linux kernel, it can be enabled by giving the "nested=1" option to the +kvm-intel module. + + +No modifications are required to user space (qemu). However, qemu's default +emulated CPU type (qemu64) does not list the "VMX" CPU feature, so it must be +explicitly enabled, by giving qemu one of the following options: + + - cpu host (emulated CPU has all features of the real CPU) + + - cpu qemu64,+vmx (add just the vmx feature to a named CPU type) + + +ABIs +---- + +Nested VMX aims to present a standard and (eventually) fully-functional VMX +implementation for the a guest hypervisor to use. As such, the official +specification of the ABI that it provides is Intel's VMX specification, +namely volume 3B of their "Intel 64 and IA-32 Architectures Software +Developer's Manual". Not all of VMX's features are currently fully supported, +but the goal is to eventually support them all, starting with the VMX features +which are used in practice by popular hypervisors (KVM and others). + +As a VMX implementation, nested VMX presents a VMCS structure to L1. +As mandated by the spec, other than the two fields revision_id and abort, +this structure is *opaque* to its user, who is not supposed to know or care +about its internal structure. Rather, the structure is accessed through the +VMREAD and VMWRITE instructions. +Still, for debugging purposes, KVM developers might be interested to know the +internals of this structure; This is struct vmcs12 from arch/x86/kvm/vmx.c. + +The name "vmcs12" refers to the VMCS that L1 builds for L2. In the code we +also have "vmcs01", the VMCS that L0 built for L1, and "vmcs02" is the VMCS +which L0 builds to actually run L2 - how this is done is explained in the +aforementioned paper. + +For convenience, we repeat the content of struct vmcs12 here. If the internals +of this structure changes, this can break live migration across KVM versions. +VMCS12_REVISION (from vmx.c) should be changed if struct vmcs12 or its inner +struct shadow_vmcs is ever changed. + +:: + + typedef u64 natural_width; + struct __packed vmcs12 { + /* According to the Intel spec, a VMCS region must start with + * these two user-visible fields */ + u32 revision_id; + u32 abort; + + u32 launch_state; /* set to 0 by VMCLEAR, to 1 by VMLAUNCH */ + u32 padding[7]; /* room for future expansion */ + + u64 io_bitmap_a; + u64 io_bitmap_b; + u64 msr_bitmap; + u64 vm_exit_msr_store_addr; + u64 vm_exit_msr_load_addr; + u64 vm_entry_msr_load_addr; + u64 tsc_offset; + u64 virtual_apic_page_addr; + u64 apic_access_addr; + u64 ept_pointer; + u64 guest_physical_address; + u64 vmcs_link_pointer; + u64 guest_ia32_debugctl; + u64 guest_ia32_pat; + u64 guest_ia32_efer; + u64 guest_pdptr0; + u64 guest_pdptr1; + u64 guest_pdptr2; + u64 guest_pdptr3; + u64 host_ia32_pat; + u64 host_ia32_efer; + u64 padding64[8]; /* room for future expansion */ + natural_width cr0_guest_host_mask; + natural_width cr4_guest_host_mask; + natural_width cr0_read_shadow; + natural_width cr4_read_shadow; + natural_width dead_space[4]; /* Last remnants of cr3_target_value[0-3]. */ + natural_width exit_qualification; + natural_width guest_linear_address; + natural_width guest_cr0; + natural_width guest_cr3; + natural_width guest_cr4; + natural_width guest_es_base; + natural_width guest_cs_base; + natural_width guest_ss_base; + natural_width guest_ds_base; + natural_width guest_fs_base; + natural_width guest_gs_base; + natural_width guest_ldtr_base; + natural_width guest_tr_base; + natural_width guest_gdtr_base; + natural_width guest_idtr_base; + natural_width guest_dr7; + natural_width guest_rsp; + natural_width guest_rip; + natural_width guest_rflags; + natural_width guest_pending_dbg_exceptions; + natural_width guest_sysenter_esp; + natural_width guest_sysenter_eip; + natural_width host_cr0; + natural_width host_cr3; + natural_width host_cr4; + natural_width host_fs_base; + natural_width host_gs_base; + natural_width host_tr_base; + natural_width host_gdtr_base; + natural_width host_idtr_base; + natural_width host_ia32_sysenter_esp; + natural_width host_ia32_sysenter_eip; + natural_width host_rsp; + natural_width host_rip; + natural_width paddingl[8]; /* room for future expansion */ + u32 pin_based_vm_exec_control; + u32 cpu_based_vm_exec_control; + u32 exception_bitmap; + u32 page_fault_error_code_mask; + u32 page_fault_error_code_match; + u32 cr3_target_count; + u32 vm_exit_controls; + u32 vm_exit_msr_store_count; + u32 vm_exit_msr_load_count; + u32 vm_entry_controls; + u32 vm_entry_msr_load_count; + u32 vm_entry_intr_info_field; + u32 vm_entry_exception_error_code; + u32 vm_entry_instruction_len; + u32 tpr_threshold; + u32 secondary_vm_exec_control; + u32 vm_instruction_error; + u32 vm_exit_reason; + u32 vm_exit_intr_info; + u32 vm_exit_intr_error_code; + u32 idt_vectoring_info_field; + u32 idt_vectoring_error_code; + u32 vm_exit_instruction_len; + u32 vmx_instruction_info; + u32 guest_es_limit; + u32 guest_cs_limit; + u32 guest_ss_limit; + u32 guest_ds_limit; + u32 guest_fs_limit; + u32 guest_gs_limit; + u32 guest_ldtr_limit; + u32 guest_tr_limit; + u32 guest_gdtr_limit; + u32 guest_idtr_limit; + u32 guest_es_ar_bytes; + u32 guest_cs_ar_bytes; + u32 guest_ss_ar_bytes; + u32 guest_ds_ar_bytes; + u32 guest_fs_ar_bytes; + u32 guest_gs_ar_bytes; + u32 guest_ldtr_ar_bytes; + u32 guest_tr_ar_bytes; + u32 guest_interruptibility_info; + u32 guest_activity_state; + u32 guest_sysenter_cs; + u32 host_ia32_sysenter_cs; + u32 padding32[8]; /* room for future expansion */ + u16 virtual_processor_id; + u16 guest_es_selector; + u16 guest_cs_selector; + u16 guest_ss_selector; + u16 guest_ds_selector; + u16 guest_fs_selector; + u16 guest_gs_selector; + u16 guest_ldtr_selector; + u16 guest_tr_selector; + u16 host_es_selector; + u16 host_cs_selector; + u16 host_ss_selector; + u16 host_ds_selector; + u16 host_fs_selector; + u16 host_gs_selector; + u16 host_tr_selector; + }; + + +Authors +------- + +These patches were written by: + - Abel Gordon, abelg <at> il.ibm.com + - Nadav Har'El, nyh <at> il.ibm.com + - Orit Wasserman, oritw <at> il.ibm.com + - Ben-Ami Yassor, benami <at> il.ibm.com + - Muli Ben-Yehuda, muli <at> il.ibm.com + +With contributions by: + - Anthony Liguori, aliguori <at> us.ibm.com + - Mike Day, mdday <at> us.ibm.com + - Michael Factor, factor <at> il.ibm.com + - Zvi Dubitzky, dubi <at> il.ibm.com + +And valuable reviews by: + - Avi Kivity, avi <at> redhat.com + - Gleb Natapov, gleb <at> redhat.com + - Marcelo Tosatti, mtosatti <at> redhat.com + - Kevin Tian, kevin.tian <at> intel.com + - and others. diff --git a/Documentation/virt/kvm/x86/running-nested-guests.rst b/Documentation/virt/kvm/x86/running-nested-guests.rst new file mode 100644 index 0000000000..87326413d5 --- /dev/null +++ b/Documentation/virt/kvm/x86/running-nested-guests.rst @@ -0,0 +1,278 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================== +Running nested guests with KVM +============================== + +A nested guest is the ability to run a guest inside another guest (it +can be KVM-based or a different hypervisor). The straightforward +example is a KVM guest that in turn runs on a KVM guest (the rest of +this document is built on this example):: + + .----------------. .----------------. + | | | | + | L2 | | L2 | + | (Nested Guest) | | (Nested Guest) | + | | | | + |----------------'--'----------------| + | | + | L1 (Guest Hypervisor) | + | KVM (/dev/kvm) | + | | + .------------------------------------------------------. + | L0 (Host Hypervisor) | + | KVM (/dev/kvm) | + |------------------------------------------------------| + | Hardware (with virtualization extensions) | + '------------------------------------------------------' + +Terminology: + +- L0 – level-0; the bare metal host, running KVM + +- L1 – level-1 guest; a VM running on L0; also called the "guest + hypervisor", as it itself is capable of running KVM. + +- L2 – level-2 guest; a VM running on L1, this is the "nested guest" + +.. note:: The above diagram is modelled after the x86 architecture; + s390x, ppc64 and other architectures are likely to have + a different design for nesting. + + For example, s390x always has an LPAR (LogicalPARtition) + hypervisor running on bare metal, adding another layer and + resulting in at least four levels in a nested setup — L0 (bare + metal, running the LPAR hypervisor), L1 (host hypervisor), L2 + (guest hypervisor), L3 (nested guest). + + This document will stick with the three-level terminology (L0, + L1, and L2) for all architectures; and will largely focus on + x86. + + +Use Cases +--------- + +There are several scenarios where nested KVM can be useful, to name a +few: + +- As a developer, you want to test your software on different operating + systems (OSes). Instead of renting multiple VMs from a Cloud + Provider, using nested KVM lets you rent a large enough "guest + hypervisor" (level-1 guest). This in turn allows you to create + multiple nested guests (level-2 guests), running different OSes, on + which you can develop and test your software. + +- Live migration of "guest hypervisors" and their nested guests, for + load balancing, disaster recovery, etc. + +- VM image creation tools (e.g. ``virt-install``, etc) often run + their own VM, and users expect these to work inside a VM. + +- Some OSes use virtualization internally for security (e.g. to let + applications run safely in isolation). + + +Enabling "nested" (x86) +----------------------- + +From Linux kernel v4.20 onwards, the ``nested`` KVM parameter is enabled +by default for Intel and AMD. (Though your Linux distribution might +override this default.) + +In case you are running a Linux kernel older than v4.19, to enable +nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``. To +persist this setting across reboots, you can add it in a config file, as +shown below: + +1. On the bare metal host (L0), list the kernel modules and ensure that + the KVM modules:: + + $ lsmod | grep -i kvm + kvm_intel 133627 0 + kvm 435079 1 kvm_intel + +2. Show information for ``kvm_intel`` module:: + + $ modinfo kvm_intel | grep -i nested + parm: nested:bool + +3. For the nested KVM configuration to persist across reboots, place the + below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it + doesn't exist):: + + $ cat /etc/modprobe.d/kvm_intel.conf + options kvm-intel nested=y + +4. Unload and re-load the KVM Intel module:: + + $ sudo rmmod kvm-intel + $ sudo modprobe kvm-intel + +5. Verify if the ``nested`` parameter for KVM is enabled:: + + $ cat /sys/module/kvm_intel/parameters/nested + Y + +For AMD hosts, the process is the same as above, except that the module +name is ``kvm-amd``. + + +Additional nested-related kernel parameters (x86) +------------------------------------------------- + +If your hardware is sufficiently advanced (Intel Haswell processor or +higher, which has newer hardware virt extensions), the following +additional features will also be enabled by default: "Shadow VMCS +(Virtual Machine Control Structure)", APIC Virtualization on your bare +metal host (L0). Parameters for Intel hosts:: + + $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs + Y + + $ cat /sys/module/kvm_intel/parameters/enable_apicv + Y + + $ cat /sys/module/kvm_intel/parameters/ept + Y + +.. note:: If you suspect your L2 (i.e. nested guest) is running slower, + ensure the above are enabled (particularly + ``enable_shadow_vmcs`` and ``ept``). + + +Starting a nested guest (x86) +----------------------------- + +Once your bare metal host (L0) is configured for nesting, you should be +able to start an L1 guest with:: + + $ qemu-kvm -cpu host [...] + +The above will pass through the host CPU's capabilities as-is to the +guest, or for better live migration compatibility, use a named CPU +model supported by QEMU. e.g.:: + + $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on + +then the guest hypervisor will subsequently be capable of running a +nested guest with accelerated KVM. + + +Enabling "nested" (s390x) +------------------------- + +1. On the host hypervisor (L0), enable the ``nested`` parameter on + s390x:: + + $ rmmod kvm + $ modprobe kvm nested=1 + +.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive + with the ``nested`` parameter — i.e. to be able to enable + ``nested``, the ``hpage`` parameter *must* be disabled. + +2. The guest hypervisor (L1) must be provided with the ``sie`` CPU + feature — with QEMU, this can be done by using "host passthrough" + (via the command-line ``-cpu host``). + +3. Now the KVM module can be loaded in the L1 (guest hypervisor):: + + $ modprobe kvm + + +Live migration with nested KVM +------------------------------ + +Migrating an L1 guest, with a *live* nested guest in it, to another +bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for +Intel x86 systems, and even on older versions for s390x. + +On AMD systems, once an L1 guest has started an L2 guest, the L1 guest +should no longer be migrated or saved (refer to QEMU documentation on +"savevm"/"loadvm") until the L2 guest shuts down. Attempting to migrate +or save-and-load an L1 guest while an L2 guest is running will result in +undefined behavior. You might see a ``kernel BUG!`` entry in ``dmesg``, a +kernel 'oops', or an outright kernel panic. Such a migrated or loaded L1 +guest can no longer be considered stable or secure, and must be restarted. +Migrating an L1 guest merely configured to support nesting, while not +actually running L2 guests, is expected to function normally even on AMD +systems but may fail once guests are started. + +Migrating an L2 guest is always expected to succeed, so all the following +scenarios should work even on AMD systems: + +- Migrating a nested guest (L2) to another L1 guest on the *same* bare + metal host. + +- Migrating a nested guest (L2) to another L1 guest on a *different* + bare metal host. + +- Migrating a nested guest (L2) to a bare metal host. + +Reporting bugs from nested setups +----------------------------------- + +Debugging "nested" problems can involve sifting through log files across +L0, L1 and L2; this can result in tedious back-n-forth between the bug +reporter and the bug fixer. + +- Mention that you are in a "nested" setup. If you are running any kind + of "nesting" at all, say so. Unfortunately, this needs to be called + out because when reporting bugs, people tend to forget to even + *mention* that they're using nested virtualization. + +- Ensure you are actually running KVM on KVM. Sometimes people do not + have KVM enabled for their guest hypervisor (L1), which results in + them running with pure emulation or what QEMU calls it as "TCG", but + they think they're running nested KVM. Thus confusing "nested Virt" + (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM). + +Information to collect (generic) +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following is not an exhaustive list, but a very good starting point: + + - Kernel, libvirt, and QEMU version from L0 + + - Kernel, libvirt and QEMU version from L1 + + - QEMU command-line of L1 -- when using libvirt, you'll find it here: + ``/var/log/libvirt/qemu/instance.log`` + + - QEMU command-line of L2 -- as above, when using libvirt, get the + complete libvirt-generated QEMU command-line + + - ``cat /sys/cpuinfo`` from L0 + + - ``cat /sys/cpuinfo`` from L1 + + - ``lscpu`` from L0 + + - ``lscpu`` from L1 + + - Full ``dmesg`` output from L0 + + - Full ``dmesg`` output from L1 + +x86-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Both the below commands, ``x86info`` and ``dmidecode``, should be +available on most Linux distributions with the same name: + + - Output of: ``x86info -a`` from L0 + + - Output of: ``x86info -a`` from L1 + + - Output of: ``dmidecode`` from L0 + + - Output of: ``dmidecode`` from L1 + +s390x-specific info to collect +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Along with the earlier mentioned generic details, the below is +also recommended: + + - ``/proc/sysinfo`` from L1; this will also include the info from L0 diff --git a/Documentation/virt/kvm/x86/timekeeping.rst b/Documentation/virt/kvm/x86/timekeeping.rst new file mode 100644 index 0000000000..21ae7efa29 --- /dev/null +++ b/Documentation/virt/kvm/x86/timekeeping.rst @@ -0,0 +1,645 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================================== +Timekeeping Virtualization for X86-Based Architectures +====================================================== + +:Author: Zachary Amsden <zamsden@redhat.com> +:Copyright: (c) 2010, Red Hat. All rights reserved. + +.. Contents + + 1) Overview + 2) Timing Devices + 3) TSC Hardware + 4) Virtualization Problems + +1. Overview +=========== + +One of the most complicated parts of the X86 platform, and specifically, +the virtualization of this platform is the plethora of timing devices available +and the complexity of emulating those devices. In addition, virtualization of +time introduces a new set of challenges because it introduces a multiplexed +division of time beyond the control of the guest CPU. + +First, we will describe the various timekeeping hardware available, then +present some of the problems which arise and solutions available, giving +specific recommendations for certain classes of KVM guests. + +The purpose of this document is to collect data and information relevant to +timekeeping which may be difficult to find elsewhere, specifically, +information relevant to KVM and hardware-based virtualization. + +2. Timing Devices +================= + +First we discuss the basic hardware devices available. TSC and the related +KVM clock are special enough to warrant a full exposition and are described in +the following section. + +2.1. i8254 - PIT +---------------- + +One of the first timer devices available is the programmable interrupt timer, +or PIT. The PIT has a fixed frequency 1.193182 MHz base clock and three +channels which can be programmed to deliver periodic or one-shot interrupts. +These three channels can be configured in different modes and have individual +counters. Channel 1 and 2 were not available for general use in the original +IBM PC, and historically were connected to control RAM refresh and the PC +speaker. Now the PIT is typically integrated as part of an emulated chipset +and a separate physical PIT is not used. + +The PIT uses I/O ports 0x40 - 0x43. Access to the 16-bit counters is done +using single or multiple byte access to the I/O ports. There are 6 modes +available, but not all modes are available to all timers, as only timer 2 +has a connected gate input, required for modes 1 and 5. The gate line is +controlled by port 61h, bit 0, as illustrated in the following diagram:: + + -------------- ---------------- + | | | | + | 1.1932 MHz|---------->| CLOCK OUT | ---------> IRQ 0 + | Clock | | | | + -------------- | +->| GATE TIMER 0 | + | ---------------- + | + | ---------------- + | | | + |------>| CLOCK OUT | ---------> 66.3 KHZ DRAM + | | | (aka /dev/null) + | +->| GATE TIMER 1 | + | ---------------- + | + | ---------------- + | | | + |------>| CLOCK OUT | ---------> Port 61h, bit 5 + | | | + Port 61h, bit 0 -------->| GATE TIMER 2 | \_.---- ____ + ---------------- _| )--|LPF|---Speaker + / *---- \___/ + Port 61h, bit 1 ---------------------------------/ + +The timer modes are now described. + +Mode 0: Single Timeout. + This is a one-shot software timeout that counts down + when the gate is high (always true for timers 0 and 1). When the count + reaches zero, the output goes high. + +Mode 1: Triggered One-shot. + The output is initially set high. When the gate + line is set high, a countdown is initiated (which does not stop if the gate is + lowered), during which the output is set low. When the count reaches zero, + the output goes high. + +Mode 2: Rate Generator. + The output is initially set high. When the countdown + reaches 1, the output goes low for one count and then returns high. The value + is reloaded and the countdown automatically resumes. If the gate line goes + low, the count is halted. If the output is low when the gate is lowered, the + output automatically goes high (this only affects timer 2). + +Mode 3: Square Wave. + This generates a high / low square wave. The count + determines the length of the pulse, which alternates between high and low + when zero is reached. The count only proceeds when gate is high and is + automatically reloaded on reaching zero. The count is decremented twice at + each clock to generate a full high / low cycle at the full periodic rate. + If the count is even, the clock remains high for N/2 counts and low for N/2 + counts; if the clock is odd, the clock is high for (N+1)/2 counts and low + for (N-1)/2 counts. Only even values are latched by the counter, so odd + values are not observed when reading. This is the intended mode for timer 2, + which generates sine-like tones by low-pass filtering the square wave output. + +Mode 4: Software Strobe. + After programming this mode and loading the counter, + the output remains high until the counter reaches zero. Then the output + goes low for 1 clock cycle and returns high. The counter is not reloaded. + Counting only occurs when gate is high. + +Mode 5: Hardware Strobe. + After programming and loading the counter, the + output remains high. When the gate is raised, a countdown is initiated + (which does not stop if the gate is lowered). When the counter reaches zero, + the output goes low for 1 clock cycle and then returns high. The counter is + not reloaded. + +In addition to normal binary counting, the PIT supports BCD counting. The +command port, 0x43 is used to set the counter and mode for each of the three +timers. + +PIT commands, issued to port 0x43, using the following bit encoding:: + + Bit 7-4: Command (See table below) + Bit 3-1: Mode (000 = Mode 0, 101 = Mode 5, 11X = undefined) + Bit 0 : Binary (0) / BCD (1) + +Command table:: + + 0000 - Latch Timer 0 count for port 0x40 + sample and hold the count to be read in port 0x40; + additional commands ignored until counter is read; + mode bits ignored. + + 0001 - Set Timer 0 LSB mode for port 0x40 + set timer to read LSB only and force MSB to zero; + mode bits set timer mode + + 0010 - Set Timer 0 MSB mode for port 0x40 + set timer to read MSB only and force LSB to zero; + mode bits set timer mode + + 0011 - Set Timer 0 16-bit mode for port 0x40 + set timer to read / write LSB first, then MSB; + mode bits set timer mode + + 0100 - Latch Timer 1 count for port 0x41 - as described above + 0101 - Set Timer 1 LSB mode for port 0x41 - as described above + 0110 - Set Timer 1 MSB mode for port 0x41 - as described above + 0111 - Set Timer 1 16-bit mode for port 0x41 - as described above + + 1000 - Latch Timer 2 count for port 0x42 - as described above + 1001 - Set Timer 2 LSB mode for port 0x42 - as described above + 1010 - Set Timer 2 MSB mode for port 0x42 - as described above + 1011 - Set Timer 2 16-bit mode for port 0x42 as described above + + 1101 - General counter latch + Latch combination of counters into corresponding ports + Bit 3 = Counter 2 + Bit 2 = Counter 1 + Bit 1 = Counter 0 + Bit 0 = Unused + + 1110 - Latch timer status + Latch combination of counter mode into corresponding ports + Bit 3 = Counter 2 + Bit 2 = Counter 1 + Bit 1 = Counter 0 + + The output of ports 0x40-0x42 following this command will be: + + Bit 7 = Output pin + Bit 6 = Count loaded (0 if timer has expired) + Bit 5-4 = Read / Write mode + 01 = MSB only + 10 = LSB only + 11 = LSB / MSB (16-bit) + Bit 3-1 = Mode + Bit 0 = Binary (0) / BCD mode (1) + +2.2. RTC +-------- + +The second device which was available in the original PC was the MC146818 real +time clock. The original device is now obsolete, and usually emulated by the +system chipset, sometimes by an HPET and some frankenstein IRQ routing. + +The RTC is accessed through CMOS variables, which uses an index register to +control which bytes are read. Since there is only one index register, read +of the CMOS and read of the RTC require lock protection (in addition, it is +dangerous to allow userspace utilities such as hwclock to have direct RTC +access, as they could corrupt kernel reads and writes of CMOS memory). + +The RTC generates an interrupt which is usually routed to IRQ 8. The interrupt +can function as a periodic timer, an additional once a day alarm, and can issue +interrupts after an update of the CMOS registers by the MC146818 is complete. +The type of interrupt is signalled in the RTC status registers. + +The RTC will update the current time fields by battery power even while the +system is off. The current time fields should not be read while an update is +in progress, as indicated in the status register. + +The clock uses a 32.768kHz crystal, so bits 6-4 of register A should be +programmed to a 32kHz divider if the RTC is to count seconds. + +This is the RAM map originally used for the RTC/CMOS:: + + Location Size Description + ------------------------------------------ + 00h byte Current second (BCD) + 01h byte Seconds alarm (BCD) + 02h byte Current minute (BCD) + 03h byte Minutes alarm (BCD) + 04h byte Current hour (BCD) + 05h byte Hours alarm (BCD) + 06h byte Current day of week (BCD) + 07h byte Current day of month (BCD) + 08h byte Current month (BCD) + 09h byte Current year (BCD) + 0Ah byte Register A + bit 7 = Update in progress + bit 6-4 = Divider for clock + 000 = 4.194 MHz + 001 = 1.049 MHz + 010 = 32 kHz + 10X = test modes + 110 = reset / disable + 111 = reset / disable + bit 3-0 = Rate selection for periodic interrupt + 000 = periodic timer disabled + 001 = 3.90625 uS + 010 = 7.8125 uS + 011 = .122070 mS + 100 = .244141 mS + ... + 1101 = 125 mS + 1110 = 250 mS + 1111 = 500 mS + 0Bh byte Register B + bit 7 = Run (0) / Halt (1) + bit 6 = Periodic interrupt enable + bit 5 = Alarm interrupt enable + bit 4 = Update-ended interrupt enable + bit 3 = Square wave interrupt enable + bit 2 = BCD calendar (0) / Binary (1) + bit 1 = 12-hour mode (0) / 24-hour mode (1) + bit 0 = 0 (DST off) / 1 (DST enabled) + OCh byte Register C (read only) + bit 7 = interrupt request flag (IRQF) + bit 6 = periodic interrupt flag (PF) + bit 5 = alarm interrupt flag (AF) + bit 4 = update interrupt flag (UF) + bit 3-0 = reserved + ODh byte Register D (read only) + bit 7 = RTC has power + bit 6-0 = reserved + 32h byte Current century BCD (*) + (*) location vendor specific and now determined from ACPI global tables + +2.3. APIC +--------- + +On Pentium and later processors, an on-board timer is available to each CPU +as part of the Advanced Programmable Interrupt Controller. The APIC is +accessed through memory-mapped registers and provides interrupt service to each +CPU, used for IPIs and local timer interrupts. + +Although in theory the APIC is a safe and stable source for local interrupts, +in practice, many bugs and glitches have occurred due to the special nature of +the APIC CPU-local memory-mapped hardware. Beware that CPU errata may affect +the use of the APIC and that workarounds may be required. In addition, some of +these workarounds pose unique constraints for virtualization - requiring either +extra overhead incurred from extra reads of memory-mapped I/O or additional +functionality that may be more computationally expensive to implement. + +Since the APIC is documented quite well in the Intel and AMD manuals, we will +avoid repetition of the detail here. It should be pointed out that the APIC +timer is programmed through the LVT (local vector timer) register, is capable +of one-shot or periodic operation, and is based on the bus clock divided down +by the programmable divider register. + +2.4. HPET +--------- + +HPET is quite complex, and was originally intended to replace the PIT / RTC +support of the X86 PC. It remains to be seen whether that will be the case, as +the de facto standard of PC hardware is to emulate these older devices. Some +systems designated as legacy free may support only the HPET as a hardware timer +device. + +The HPET spec is rather loose and vague, requiring at least 3 hardware timers, +but allowing implementation freedom to support many more. It also imposes no +fixed rate on the timer frequency, but does impose some extremal values on +frequency, error and slew. + +In general, the HPET is recommended as a high precision (compared to PIT /RTC) +time source which is independent of local variation (as there is only one HPET +in any given system). The HPET is also memory-mapped, and its presence is +indicated through ACPI tables by the BIOS. + +Detailed specification of the HPET is beyond the current scope of this +document, as it is also very well documented elsewhere. + +2.5. Offboard Timers +-------------------- + +Several cards, both proprietary (watchdog boards) and commonplace (e1000) have +timing chips built into the cards which may have registers which are accessible +to kernel or user drivers. To the author's knowledge, using these to generate +a clocksource for a Linux or other kernel has not yet been attempted and is in +general frowned upon as not playing by the agreed rules of the game. Such a +timer device would require additional support to be virtualized properly and is +not considered important at this time as no known operating system does this. + +3. TSC Hardware +=============== + +The TSC or time stamp counter is relatively simple in theory; it counts +instruction cycles issued by the processor, which can be used as a measure of +time. In practice, due to a number of problems, it is the most complicated +timekeeping device to use. + +The TSC is represented internally as a 64-bit MSR which can be read with the +RDMSR, RDTSC, or RDTSCP (when available) instructions. In the past, hardware +limitations made it possible to write the TSC, but generally on old hardware it +was only possible to write the low 32-bits of the 64-bit counter, and the upper +32-bits of the counter were cleared. Now, however, on Intel processors family +0Fh, for models 3, 4 and 6, and family 06h, models e and f, this restriction +has been lifted and all 64-bits are writable. On AMD systems, the ability to +write the TSC MSR is not an architectural guarantee. + +The TSC is accessible from CPL-0 and conditionally, for CPL > 0 software by +means of the CR4.TSD bit, which when enabled, disables CPL > 0 TSC access. + +Some vendors have implemented an additional instruction, RDTSCP, which returns +atomically not just the TSC, but an indicator which corresponds to the +processor number. This can be used to index into an array of TSC variables to +determine offset information in SMP systems where TSCs are not synchronized. +The presence of this instruction must be determined by consulting CPUID feature +bits. + +Both VMX and SVM provide extension fields in the virtualization hardware which +allows the guest visible TSC to be offset by a constant. Newer implementations +promise to allow the TSC to additionally be scaled, but this hardware is not +yet widely available. + +3.1. TSC synchronization +------------------------ + +The TSC is a CPU-local clock in most implementations. This means, on SMP +platforms, the TSCs of different CPUs may start at different times depending +on when the CPUs are powered on. Generally, CPUs on the same die will share +the same clock, however, this is not always the case. + +The BIOS may attempt to resynchronize the TSCs during the poweron process and +the operating system or other system software may attempt to do this as well. +Several hardware limitations make the problem worse - if it is not possible to +write the full 64-bits of the TSC, it may be impossible to match the TSC in +newly arriving CPUs to that of the rest of the system, resulting in +unsynchronized TSCs. This may be done by BIOS or system software, but in +practice, getting a perfectly synchronized TSC will not be possible unless all +values are read from the same clock, which generally only is possible on single +socket systems or those with special hardware support. + +3.2. TSC and CPU hotplug +------------------------ + +As touched on already, CPUs which arrive later than the boot time of the system +may not have a TSC value that is synchronized with the rest of the system. +Either system software, BIOS, or SMM code may actually try to establish the TSC +to a value matching the rest of the system, but a perfect match is usually not +a guarantee. This can have the effect of bringing a system from a state where +TSC is synchronized back to a state where TSC synchronization flaws, however +small, may be exposed to the OS and any virtualization environment. + +3.3. TSC and multi-socket / NUMA +-------------------------------- + +Multi-socket systems, especially large multi-socket systems are likely to have +individual clocksources rather than a single, universally distributed clock. +Since these clocks are driven by different crystals, they will not have +perfectly matched frequency, and temperature and electrical variations will +cause the CPU clocks, and thus the TSCs to drift over time. Depending on the +exact clock and bus design, the drift may or may not be fixed in absolute +error, and may accumulate over time. + +In addition, very large systems may deliberately slew the clocks of individual +cores. This technique, known as spread-spectrum clocking, reduces EMI at the +clock frequency and harmonics of it, which may be required to pass FCC +standards for telecommunications and computer equipment. + +It is recommended not to trust the TSCs to remain synchronized on NUMA or +multiple socket systems for these reasons. + +3.4. TSC and C-states +--------------------- + +C-states, or idling states of the processor, especially C1E and deeper sleep +states may be problematic for TSC as well. The TSC may stop advancing in such +a state, resulting in a TSC which is behind that of other CPUs when execution +is resumed. Such CPUs must be detected and flagged by the operating system +based on CPU and chipset identifications. + +The TSC in such a case may be corrected by catching it up to a known external +clocksource. + +3.5. TSC frequency change / P-states +------------------------------------ + +To make things slightly more interesting, some CPUs may change frequency. They +may or may not run the TSC at the same rate, and because the frequency change +may be staggered or slewed, at some points in time, the TSC rate may not be +known other than falling within a range of values. In this case, the TSC will +not be a stable time source, and must be calibrated against a known, stable, +external clock to be a usable source of time. + +Whether the TSC runs at a constant rate or scales with the P-state is model +dependent and must be determined by inspecting CPUID, chipset or vendor +specific MSR fields. + +In addition, some vendors have known bugs where the P-state is actually +compensated for properly during normal operation, but when the processor is +inactive, the P-state may be raised temporarily to service cache misses from +other processors. In such cases, the TSC on halted CPUs could advance faster +than that of non-halted processors. AMD Turion processors are known to have +this problem. + +3.6. TSC and STPCLK / T-states +------------------------------ + +External signals given to the processor may also have the effect of stopping +the TSC. This is typically done for thermal emergency power control to prevent +an overheating condition, and typically, there is no way to detect that this +condition has happened. + +3.7. TSC virtualization - VMX +----------------------------- + +VMX provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP +instructions, which is enough for full virtualization of TSC in any manner. In +addition, VMX allows passing through the host TSC plus an additional TSC_OFFSET +field specified in the VMCS. Special instructions must be used to read and +write the VMCS field. + +3.8. TSC virtualization - SVM +----------------------------- + +SVM provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP +instructions, which is enough for full virtualization of TSC in any manner. In +addition, SVM allows passing through the host TSC plus an additional offset +field specified in the SVM control block. + +3.9. TSC feature bits in Linux +------------------------------ + +In summary, there is no way to guarantee the TSC remains in perfect +synchronization unless it is explicitly guaranteed by the architecture. Even +if so, the TSCs in multi-sockets or NUMA systems may still run independently +despite being locally consistent. + +The following feature bits are used by Linux to signal various TSC attributes, +but they can only be taken to be meaningful for UP or single node systems. + +========================= ======================================= +X86_FEATURE_TSC The TSC is available in hardware +X86_FEATURE_RDTSCP The RDTSCP instruction is available +X86_FEATURE_CONSTANT_TSC The TSC rate is unchanged with P-states +X86_FEATURE_NONSTOP_TSC The TSC does not stop in C-states +X86_FEATURE_TSC_RELIABLE TSC sync checks are skipped (VMware) +========================= ======================================= + +4. Virtualization Problems +========================== + +Timekeeping is especially problematic for virtualization because a number of +challenges arise. The most obvious problem is that time is now shared between +the host and, potentially, a number of virtual machines. Thus the virtual +operating system does not run with 100% usage of the CPU, despite the fact that +it may very well make that assumption. It may expect it to remain true to very +exacting bounds when interrupt sources are disabled, but in reality only its +virtual interrupt sources are disabled, and the machine may still be preempted +at any time. This causes problems as the passage of real time, the injection +of machine interrupts and the associated clock sources are no longer completely +synchronized with real time. + +This same problem can occur on native hardware to a degree, as SMM mode may +steal cycles from the naturally on X86 systems when SMM mode is used by the +BIOS, but not in such an extreme fashion. However, the fact that SMM mode may +cause similar problems to virtualization makes it a good justification for +solving many of these problems on bare metal. + +4.1. Interrupt clocking +----------------------- + +One of the most immediate problems that occurs with legacy operating systems +is that the system timekeeping routines are often designed to keep track of +time by counting periodic interrupts. These interrupts may come from the PIT +or the RTC, but the problem is the same: the host virtualization engine may not +be able to deliver the proper number of interrupts per second, and so guest +time may fall behind. This is especially problematic if a high interrupt rate +is selected, such as 1000 HZ, which is unfortunately the default for many Linux +guests. + +There are three approaches to solving this problem; first, it may be possible +to simply ignore it. Guests which have a separate time source for tracking +'wall clock' or 'real time' may not need any adjustment of their interrupts to +maintain proper time. If this is not sufficient, it may be necessary to inject +additional interrupts into the guest in order to increase the effective +interrupt rate. This approach leads to complications in extreme conditions, +where host load or guest lag is too much to compensate for, and thus another +solution to the problem has risen: the guest may need to become aware of lost +ticks and compensate for them internally. Although promising in theory, the +implementation of this policy in Linux has been extremely error prone, and a +number of buggy variants of lost tick compensation are distributed across +commonly used Linux systems. + +Windows uses periodic RTC clocking as a means of keeping time internally, and +thus requires interrupt slewing to keep proper time. It does use a low enough +rate (ed: is it 18.2 Hz?) however that it has not yet been a problem in +practice. + +4.2. TSC sampling and serialization +----------------------------------- + +As the highest precision time source available, the cycle counter of the CPU +has aroused much interest from developers. As explained above, this timer has +many problems unique to its nature as a local, potentially unstable and +potentially unsynchronized source. One issue which is not unique to the TSC, +but is highlighted because of its very precise nature is sampling delay. By +definition, the counter, once read is already old. However, it is also +possible for the counter to be read ahead of the actual use of the result. +This is a consequence of the superscalar execution of the instruction stream, +which may execute instructions out of order. Such execution is called +non-serialized. Forcing serialized execution is necessary for precise +measurement with the TSC, and requires a serializing instruction, such as CPUID +or an MSR read. + +Since CPUID may actually be virtualized by a trap and emulate mechanism, this +serialization can pose a performance issue for hardware virtualization. An +accurate time stamp counter reading may therefore not always be available, and +it may be necessary for an implementation to guard against "backwards" reads of +the TSC as seen from other CPUs, even in an otherwise perfectly synchronized +system. + +4.3. Timespec aliasing +---------------------- + +Additionally, this lack of serialization from the TSC poses another challenge +when using results of the TSC when measured against another time source. As +the TSC is much higher precision, many possible values of the TSC may be read +while another clock is still expressing the same value. + +That is, you may read (T,T+10) while external clock C maintains the same value. +Due to non-serialized reads, you may actually end up with a range which +fluctuates - from (T-1.. T+10). Thus, any time calculated from a TSC, but +calibrated against an external value may have a range of valid values. +Re-calibrating this computation may actually cause time, as computed after the +calibration, to go backwards, compared with time computed before the +calibration. + +This problem is particularly pronounced with an internal time source in Linux, +the kernel time, which is expressed in the theoretically high resolution +timespec - but which advances in much larger granularity intervals, sometimes +at the rate of jiffies, and possibly in catchup modes, at a much larger step. + +This aliasing requires care in the computation and recalibration of kvmclock +and any other values derived from TSC computation (such as TSC virtualization +itself). + +4.4. Migration +-------------- + +Migration of a virtual machine raises problems for timekeeping in two ways. +First, the migration itself may take time, during which interrupts cannot be +delivered, and after which, the guest time may need to be caught up. NTP may +be able to help to some degree here, as the clock correction required is +typically small enough to fall in the NTP-correctable window. + +An additional concern is that timers based off the TSC (or HPET, if the raw bus +clock is exposed) may now be running at different rates, requiring compensation +in some way in the hypervisor by virtualizing these timers. In addition, +migrating to a faster machine may preclude the use of a passthrough TSC, as a +faster clock cannot be made visible to a guest without the potential of time +advancing faster than usual. A slower clock is less of a problem, as it can +always be caught up to the original rate. KVM clock avoids these problems by +simply storing multipliers and offsets against the TSC for the guest to convert +back into nanosecond resolution values. + +4.5. Scheduling +--------------- + +Since scheduling may be based on precise timing and firing of interrupts, the +scheduling algorithms of an operating system may be adversely affected by +virtualization. In theory, the effect is random and should be universally +distributed, but in contrived as well as real scenarios (guest device access, +causes of virtualization exits, possible context switch), this may not always +be the case. The effect of this has not been well studied. + +In an attempt to work around this, several implementations have provided a +paravirtualized scheduler clock, which reveals the true amount of CPU time for +which a virtual machine has been running. + +4.6. Watchdogs +-------------- + +Watchdog timers, such as the lock detector in Linux may fire accidentally when +running under hardware virtualization due to timer interrupts being delayed or +misinterpretation of the passage of real time. Usually, these warnings are +spurious and can be ignored, but in some circumstances it may be necessary to +disable such detection. + +4.7. Delays and precision timing +-------------------------------- + +Precise timing and delays may not be possible in a virtualized system. This +can happen if the system is controlling physical hardware, or issues delays to +compensate for slower I/O to and from devices. The first issue is not solvable +in general for a virtualized system; hardware control software can't be +adequately virtualized without a full real-time operating system, which would +require an RT aware virtualization platform. + +The second issue may cause performance problems, but this is unlikely to be a +significant issue. In many cases these delays may be eliminated through +configuration or paravirtualization. + +4.8. Covert channels and leaks +------------------------------ + +In addition to the above problems, time information will inevitably leak to the +guest about the host in anything but a perfect implementation of virtualized +time. This may allow the guest to infer the presence of a hypervisor (as in a +red-pill type detection), and it may allow information to leak between guests +by using CPU utilization itself as a signalling channel. Preventing such +problems would require completely isolated virtual time which may not track +real time any longer. This may be useful in certain security or QA contexts, +but in general isn't recommended for real-world deployment scenarios. diff --git a/Documentation/virt/ne_overview.rst b/Documentation/virt/ne_overview.rst new file mode 100644 index 0000000000..74c2f5919c --- /dev/null +++ b/Documentation/virt/ne_overview.rst @@ -0,0 +1,100 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Nitro Enclaves +============== + +Overview +======== + +Nitro Enclaves (NE) is a new Amazon Elastic Compute Cloud (EC2) capability +that allows customers to carve out isolated compute environments within EC2 +instances [1]. + +For example, an application that processes sensitive data and runs in a VM, +can be separated from other applications running in the same VM. This +application then runs in a separate VM than the primary VM, namely an enclave. +It runs alongside the VM that spawned it. This setup matches low latency +applications needs. + +The current supported architectures for the NE kernel driver, available in the +upstream Linux kernel, are x86 and ARM64. + +The resources that are allocated for the enclave, such as memory and CPUs, are +carved out of the primary VM. Each enclave is mapped to a process running in the +primary VM, that communicates with the NE kernel driver via an ioctl interface. + +In this sense, there are two components: + +1. An enclave abstraction process - a user space process running in the primary +VM guest that uses the provided ioctl interface of the NE driver to spawn an +enclave VM (that's 2 below). + +There is a NE emulated PCI device exposed to the primary VM. The driver for this +new PCI device is included in the NE driver. + +The ioctl logic is mapped to PCI device commands e.g. the NE_START_ENCLAVE ioctl +maps to an enclave start PCI command. The PCI device commands are then +translated into actions taken on the hypervisor side; that's the Nitro +hypervisor running on the host where the primary VM is running. The Nitro +hypervisor is based on core KVM technology. + +2. The enclave itself - a VM running on the same host as the primary VM that +spawned it. Memory and CPUs are carved out of the primary VM and are dedicated +for the enclave VM. An enclave does not have persistent storage attached. + +The memory regions carved out of the primary VM and given to an enclave need to +be aligned 2 MiB / 1 GiB physically contiguous memory regions (or multiple of +this size e.g. 8 MiB). The memory can be allocated e.g. by using hugetlbfs from +user space [2][3][7]. The memory size for an enclave needs to be at least +64 MiB. The enclave memory and CPUs need to be from the same NUMA node. + +An enclave runs on dedicated cores. CPU 0 and its CPU siblings need to remain +available for the primary VM. A CPU pool has to be set for NE purposes by an +user with admin capability. See the cpu list section from the kernel +documentation [4] for how a CPU pool format looks. + +An enclave communicates with the primary VM via a local communication channel, +using virtio-vsock [5]. The primary VM has virtio-pci vsock emulated device, +while the enclave VM has a virtio-mmio vsock emulated device. The vsock device +uses eventfd for signaling. The enclave VM sees the usual interfaces - local +APIC and IOAPIC - to get interrupts from virtio-vsock device. The virtio-mmio +device is placed in memory below the typical 4 GiB. + +The application that runs in the enclave needs to be packaged in an enclave +image together with the OS ( e.g. kernel, ramdisk, init ) that will run in the +enclave VM. The enclave VM has its own kernel and follows the standard Linux +boot protocol [6][8]. + +The kernel bzImage, the kernel command line, the ramdisk(s) are part of the +Enclave Image Format (EIF); plus an EIF header including metadata such as magic +number, eif version, image size and CRC. + +Hash values are computed for the entire enclave image (EIF), the kernel and +ramdisk(s). That's used, for example, to check that the enclave image that is +loaded in the enclave VM is the one that was intended to be run. + +These crypto measurements are included in a signed attestation document +generated by the Nitro Hypervisor and further used to prove the identity of the +enclave; KMS is an example of service that NE is integrated with and that checks +the attestation doc. + +The enclave image (EIF) is loaded in the enclave memory at offset 8 MiB. The +init process in the enclave connects to the vsock CID of the primary VM and a +predefined port - 9000 - to send a heartbeat value - 0xb7. This mechanism is +used to check in the primary VM that the enclave has booted. The CID of the +primary VM is 3. + +If the enclave VM crashes or gracefully exits, an interrupt event is received by +the NE driver. This event is sent further to the user space enclave process +running in the primary VM via a poll notification mechanism. Then the user space +enclave process can exit. + +[1] https://aws.amazon.com/ec2/nitro/nitro-enclaves/ +[2] https://www.kernel.org/doc/html/latest/admin-guide/mm/hugetlbpage.html +[3] https://lwn.net/Articles/807108/ +[4] https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html +[5] https://man7.org/linux/man-pages/man7/vsock.7.html +[6] https://www.kernel.org/doc/html/latest/x86/boot.html +[7] https://www.kernel.org/doc/html/latest/arm64/hugetlbpage.html +[8] https://www.kernel.org/doc/html/latest/arm64/booting.html diff --git a/Documentation/virt/paravirt_ops.rst b/Documentation/virt/paravirt_ops.rst new file mode 100644 index 0000000000..62d867e0d4 --- /dev/null +++ b/Documentation/virt/paravirt_ops.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Paravirt_ops +============ + +Linux provides support for different hypervisor virtualization technologies. +Historically, different binary kernels would be required in order to support +different hypervisors; this restriction was removed with pv_ops. +Linux pv_ops is a virtualization API which enables support for different +hypervisors. It allows each hypervisor to override critical operations and +allows a single kernel binary to run on all supported execution environments +including native machine -- without any hypervisors. + +pv_ops provides a set of function pointers which represent operations +corresponding to low-level critical instructions and high-level +functionalities in various areas. pv_ops allows for optimizations at run +time by enabling binary patching of the low-level critical operations +at boot time. + +pv_ops operations are classified into three categories: + +- simple indirect call + These operations correspond to high-level functionality where it is + known that the overhead of indirect call isn't very important. + +- indirect call which allows optimization with binary patch + Usually these operations correspond to low-level critical instructions. They + are called frequently and are performance critical. The overhead is + very important. + +- a set of macros for hand written assembly code + Hand written assembly codes (.S files) also need paravirtualization + because they include sensitive instructions or some code paths in + them are very performance critical. diff --git a/Documentation/virt/uml/user_mode_linux_howto_v2.rst b/Documentation/virt/uml/user_mode_linux_howto_v2.rst new file mode 100644 index 0000000000..d1cfe415e4 --- /dev/null +++ b/Documentation/virt/uml/user_mode_linux_howto_v2.rst @@ -0,0 +1,1238 @@ +.. SPDX-License-Identifier: GPL-2.0 + +######### +UML HowTo +######### + +.. contents:: :local: + +************ +Introduction +************ + +Welcome to User Mode Linux + +User Mode Linux is the first Open Source virtualization platform (first +release date 1991) and second virtualization platform for an x86 PC. + +How is UML Different from a VM using Virtualization package X? +============================================================== + +We have come to assume that virtualization also means some level of +hardware emulation. In fact, it does not. As long as a virtualization +package provides the OS with devices which the OS can recognize and +has a driver for, the devices do not need to emulate real hardware. +Most OSes today have built-in support for a number of "fake" +devices used only under virtualization. +User Mode Linux takes this concept to the ultimate extreme - there +is not a single real device in sight. It is 100% artificial or if +we use the correct term 100% paravirtual. All UML devices are abstract +concepts which map onto something provided by the host - files, sockets, +pipes, etc. + +The other major difference between UML and various virtualization +packages is that there is a distinct difference between the way the UML +kernel and the UML programs operate. +The UML kernel is just a process running on Linux - same as any other +program. It can be run by an unprivileged user and it does not require +anything in terms of special CPU features. +The UML userspace, however, is a bit different. The Linux kernel on the +host machine assists UML in intercepting everything the program running +on a UML instance is trying to do and making the UML kernel handle all +of its requests. +This is different from other virtualization packages which do not make any +difference between the guest kernel and guest programs. This difference +results in a number of advantages and disadvantages of UML over let's say +QEMU which we will cover later in this document. + + +Why Would I Want User Mode Linux? +================================= + + +* If User Mode Linux kernel crashes, your host kernel is still fine. It + is not accelerated in any way (vhost, kvm, etc) and it is not trying to + access any devices directly. It is, in fact, a process like any other. + +* You can run a usermode kernel as a non-root user (you may need to + arrange appropriate permissions for some devices). + +* You can run a very small VM with a minimal footprint for a specific + task (for example 32M or less). + +* You can get extremely high performance for anything which is a "kernel + specific task" such as forwarding, firewalling, etc while still being + isolated from the host kernel. + +* You can play with kernel concepts without breaking things. + +* You are not bound by "emulating" hardware, so you can try weird and + wonderful concepts which are very difficult to support when emulating + real hardware such as time travel and making your system clock + dependent on what UML does (very useful for things like tests). + +* It's fun. + +Why not to run UML +================== + +* The syscall interception technique used by UML makes it inherently + slower for any userspace applications. While it can do kernel tasks + on par with most other virtualization packages, its userspace is + **slow**. The root cause is that UML has a very high cost of creating + new processes and threads (something most Unix/Linux applications + take for granted). + +* UML is strictly uniprocessor at present. If you want to run an + application which needs many CPUs to function, it is clearly the + wrong choice. + +*********************** +Building a UML instance +*********************** + +There is no UML installer in any distribution. While you can use off +the shelf install media to install into a blank VM using a virtualization +package, there is no UML equivalent. You have to use appropriate tools on +your host to build a viable filesystem image. + +This is extremely easy on Debian - you can do it using debootstrap. It is +also easy on OpenWRT - the build process can build UML images. All other +distros - YMMV. + +Creating an image +================= + +Create a sparse raw disk image:: + + # dd if=/dev/zero of=disk_image_name bs=1 count=1 seek=16G + +This will create a 16G disk image. The OS will initially allocate only one +block and will allocate more as they are written by UML. As of kernel +version 4.19 UML fully supports TRIM (as usually used by flash drives). +Using TRIM inside the UML image by specifying discard as a mount option +or by running ``tune2fs -o discard /dev/ubdXX`` will request UML to +return any unused blocks to the OS. + +Create a filesystem on the disk image and mount it:: + + # mkfs.ext4 ./disk_image_name && mount ./disk_image_name /mnt + +This example uses ext4, any other filesystem such as ext3, btrfs, xfs, +jfs, etc will work too. + +Create a minimal OS installation on the mounted filesystem:: + + # debootstrap buster /mnt http://deb.debian.org/debian + +debootstrap does not set up the root password, fstab, hostname or +anything related to networking. It is up to the user to do that. + +Set the root password - the easiest way to do that is to chroot into the +mounted image:: + + # chroot /mnt + # passwd + # exit + +Edit key system files +===================== + +UML block devices are called ubds. The fstab created by debootstrap +will be empty and it needs an entry for the root file system:: + + /dev/ubd0 ext4 discard,errors=remount-ro 0 1 + +The image hostname will be set to the same as the host on which you +are creating its image. It is a good idea to change that to avoid +"Oh, bummer, I rebooted the wrong machine". + +UML supports two classes of network devices - the older uml_net ones +which are scheduled for obsoletion. These are called ethX. It also +supports the newer vector IO devices which are significantly faster +and have support for some standard virtual network encapsulations like +Ethernet over GRE and Ethernet over L2TPv3. These are called vec0. + +Depending on which one is in use, ``/etc/network/interfaces`` will +need entries like:: + + # legacy UML network devices + auto eth0 + iface eth0 inet dhcp + + # vector UML network devices + auto vec0 + iface vec0 inet dhcp + +We now have a UML image which is nearly ready to run, all we need is a +UML kernel and modules for it. + +Most distributions have a UML package. Even if you intend to use your own +kernel, testing the image with a stock one is always a good start. These +packages come with a set of modules which should be copied to the target +filesystem. The location is distribution dependent. For Debian these +reside under /usr/lib/uml/modules. Copy recursively the content of this +directory to the mounted UML filesystem:: + + # cp -rax /usr/lib/uml/modules /mnt/lib/modules + +If you have compiled your own kernel, you need to use the usual "install +modules to a location" procedure by running:: + + # make INSTALL_MOD_PATH=/mnt/lib/modules modules_install + +This will install modules into /mnt/lib/modules/$(KERNELRELEASE). +To specify the full module installation path, use:: + + # make MODLIB=/mnt/lib/modules modules_install + +At this point the image is ready to be brought up. + +************************* +Setting Up UML Networking +************************* + +UML networking is designed to emulate an Ethernet connection. This +connection may be either point-to-point (similar to a connection +between machines using a back-to-back cable) or a connection to a +switch. UML supports a wide variety of means to build these +connections to all of: local machine, remote machine(s), local and +remote UML and other VM instances. + + ++-----------+--------+------------------------------------+------------+ +| Transport | Type | Capabilities | Throughput | ++===========+========+====================================+============+ +| tap | vector | checksum, tso | > 8Gbit | ++-----------+--------+------------------------------------+------------+ +| hybrid | vector | checksum, tso, multipacket rx | > 6GBit | ++-----------+--------+------------------------------------+------------+ +| raw | vector | checksum, tso, multipacket rx, tx" | > 6GBit | ++-----------+--------+------------------------------------+------------+ +| EoGRE | vector | multipacket rx, tx | > 3Gbit | ++-----------+--------+------------------------------------+------------+ +| Eol2tpv3 | vector | multipacket rx, tx | > 3Gbit | ++-----------+--------+------------------------------------+------------+ +| bess | vector | multipacket rx, tx | > 3Gbit | ++-----------+--------+------------------------------------+------------+ +| fd | vector | dependent on fd type | varies | ++-----------+--------+------------------------------------+------------+ +| tuntap | legacy | none | ~ 500Mbit | ++-----------+--------+------------------------------------+------------+ +| daemon | legacy | none | ~ 450Mbit | ++-----------+--------+------------------------------------+------------+ +| socket | legacy | none | ~ 450Mbit | ++-----------+--------+------------------------------------+------------+ +| pcap | legacy | rx only | ~ 450Mbit | ++-----------+--------+------------------------------------+------------+ +| ethertap | legacy | obsolete | ~ 500Mbit | ++-----------+--------+------------------------------------+------------+ +| vde | legacy | obsolete | ~ 500Mbit | ++-----------+--------+------------------------------------+------------+ + +* All transports which have tso and checksum offloads can deliver speeds + approaching 10G on TCP streams. + +* All transports which have multi-packet rx and/or tx can deliver pps + rates of up to 1Mps or more. + +* All legacy transports are generally limited to ~600-700MBit and 0.05Mps. + +* GRE and L2TPv3 allow connections to all of: local machine, remote + machines, remote network devices and remote UML instances. + +* Socket allows connections only between UML instances. + +* Daemon and bess require running a local switch. This switch may be + connected to the host as well. + + +Network configuration privileges +================================ + +The majority of the supported networking modes need ``root`` privileges. +For example, in the legacy tuntap networking mode, users were required +to be part of the group associated with the tunnel device. + +For newer network drivers like the vector transports, ``root`` privilege +is required to fire an ioctl to setup the tun interface and/or use +raw sockets where needed. + +This can be achieved by granting the user a particular capability instead +of running UML as root. In case of vector transport, a user can add the +capability ``CAP_NET_ADMIN`` or ``CAP_NET_RAW`` to the uml binary. +Thenceforth, UML can be run with normal user privilges, along with +full networking. + +For example:: + + # sudo setcap cap_net_raw,cap_net_admin+ep linux + +Configuring vector transports +=============================== + +All vector transports support a similar syntax: + +If X is the interface number as in vec0, vec1, vec2, etc, the general +syntax for options is:: + + vecX:transport="Transport Name",option=value,option=value,...,option=value + +Common options +-------------- + +These options are common for all transports: + +* ``depth=int`` - sets the queue depth for vector IO. This is the + amount of packets UML will attempt to read or write in a single + system call. The default number is 64 and is generally sufficient + for most applications that need throughput in the 2-4 Gbit range. + Higher speeds may require larger values. + +* ``mac=XX:XX:XX:XX:XX`` - sets the interface MAC address value. + +* ``gro=[0,1]`` - sets GRO off or on. Enables receive/transmit offloads. + The effect of this option depends on the host side support in the transport + which is being configured. In most cases it will enable TCP segmentation and + RX/TX checksumming offloads. The setting must be identical on the host side + and the UML side. The UML kernel will produce warnings if it is not. + For example, GRO is enabled by default on local machine interfaces + (e.g. veth pairs, bridge, etc), so it should be enabled in UML in the + corresponding UML transports (raw, tap, hybrid) in order for networking to + operate correctly. + +* ``mtu=int`` - sets the interface MTU + +* ``headroom=int`` - adjusts the default headroom (32 bytes) reserved + if a packet will need to be re-encapsulated into for instance VXLAN. + +* ``vec=0`` - disable multipacket IO and fall back to packet at a + time mode + +Shared Options +-------------- + +* ``ifname=str`` Transports which bind to a local network interface + have a shared option - the name of the interface to bind to. + +* ``src, dst, src_port, dst_port`` - all transports which use sockets + which have the notion of source and destination and/or source port + and destination port use these to specify them. + +* ``v6=[0,1]`` to specify if a v6 connection is desired for all + transports which operate over IP. Additionally, for transports that + have some differences in the way they operate over v4 and v6 (for example + EoL2TPv3), sets the correct mode of operation. In the absence of this + option, the socket type is determined based on what do the src and dst + arguments resolve/parse to. + +tap transport +------------- + +Example:: + + vecX:transport=tap,ifname=tap0,depth=128,gro=1 + +This will connect vec0 to tap0 on the host. Tap0 must already exist (for example +created using tunctl) and UP. + +tap0 can be configured as a point-to-point interface and given an IP +address so that UML can talk to the host. Alternatively, it is possible +to connect UML to a tap interface which is connected to a bridge. + +While tap relies on the vector infrastructure, it is not a true vector +transport at this point, because Linux does not support multi-packet +IO on tap file descriptors for normal userspace apps like UML. This +is a privilege which is offered only to something which can hook up +to it at kernel level via specialized interfaces like vhost-net. A +vhost-net like helper for UML is planned at some point in the future. + +Privileges required: tap transport requires either: + +* tap interface to exist and be created persistent and owned by the + UML user using tunctl. Example ``tunctl -u uml-user -t tap0`` + +* binary to have ``CAP_NET_ADMIN`` privilege + +hybrid transport +---------------- + +Example:: + + vecX:transport=hybrid,ifname=tap0,depth=128,gro=1 + +This is an experimental/demo transport which couples tap for transmit +and a raw socket for receive. The raw socket allows multi-packet +receive resulting in significantly higher packet rates than normal tap. + +Privileges required: hybrid requires ``CAP_NET_RAW`` capability by +the UML user as well as the requirements for the tap transport. + +raw socket transport +-------------------- + +Example:: + + vecX:transport=raw,ifname=p-veth0,depth=128,gro=1 + + +This transport uses vector IO on raw sockets. While you can bind to any +interface including a physical one, the most common use it to bind to +the "peer" side of a veth pair with the other side configured on the +host. + +Example host configuration for Debian: + +**/etc/network/interfaces**:: + + auto veth0 + iface veth0 inet static + address 192.168.4.1 + netmask 255.255.255.252 + broadcast 192.168.4.3 + pre-up ip link add veth0 type veth peer name p-veth0 && \ + ifconfig p-veth0 up + +UML can now bind to p-veth0 like this:: + + vec0:transport=raw,ifname=p-veth0,depth=128,gro=1 + + +If the UML guest is configured with 192.168.4.2 and netmask 255.255.255.0 +it can talk to the host on 192.168.4.1 + +The raw transport also provides some support for offloading some of the +filtering to the host. The two options to control it are: + +* ``bpffile=str`` filename of raw bpf code to be loaded as a socket filter + +* ``bpfflash=int`` 0/1 allow loading of bpf from inside User Mode Linux. + This option allows the use of the ethtool load firmware command to + load bpf code. + +In either case the bpf code is loaded into the host kernel. While this is +presently limited to legacy bpf syntax (not ebpf), it is still a security +risk. It is not recommended to allow this unless the User Mode Linux +instance is considered trusted. + +Privileges required: raw socket transport requires `CAP_NET_RAW` +capability. + +GRE socket transport +-------------------- + +Example:: + + vecX:transport=gre,src=$src_host,dst=$dst_host + + +This will configure an Ethernet over ``GRE`` (aka ``GRETAP`` or +``GREIRB``) tunnel which will connect the UML instance to a ``GRE`` +endpoint at host dst_host. ``GRE`` supports the following additional +options: + +* ``rx_key=int`` - GRE 32-bit integer key for rx packets, if set, + ``txkey`` must be set too + +* ``tx_key=int`` - GRE 32-bit integer key for tx packets, if set + ``rx_key`` must be set too + +* ``sequence=[0,1]`` - enable GRE sequence + +* ``pin_sequence=[0,1]`` - pretend that the sequence is always reset + on each packet (needed to interoperate with some really broken + implementations) + +* ``v6=[0,1]`` - force IPv4 or IPv6 sockets respectively + +* GRE checksum is not presently supported + +GRE has a number of caveats: + +* You can use only one GRE connection per IP address. There is no way to + multiplex connections as each GRE tunnel is terminated directly on + the UML instance. + +* The key is not really a security feature. While it was intended as such + its "security" is laughable. It is, however, a useful feature to + ensure that the tunnel is not misconfigured. + +An example configuration for a Linux host with a local address of +192.168.128.1 to connect to a UML instance at 192.168.129.1 + +**/etc/network/interfaces**:: + + auto gt0 + iface gt0 inet static + address 10.0.0.1 + netmask 255.255.255.0 + broadcast 10.0.0.255 + mtu 1500 + pre-up ip link add gt0 type gretap local 192.168.128.1 \ + remote 192.168.129.1 || true + down ip link del gt0 || true + +Additionally, GRE has been tested versus a variety of network equipment. + +Privileges required: GRE requires ``CAP_NET_RAW`` + +l2tpv3 socket transport +----------------------- + +_Warning_. L2TPv3 has a "bug". It is the "bug" known as "has more +options than GNU ls". While it has some advantages, there are usually +easier (and less verbose) ways to connect a UML instance to something. +For example, most devices which support L2TPv3 also support GRE. + +Example:: + + vec0:transport=l2tpv3,udp=1,src=$src_host,dst=$dst_host,srcport=$src_port,dstport=$dst_port,depth=128,rx_session=0xffffffff,tx_session=0xffff + +This will configure an Ethernet over L2TPv3 fixed tunnel which will +connect the UML instance to a L2TPv3 endpoint at host $dst_host using +the L2TPv3 UDP flavour and UDP destination port $dst_port. + +L2TPv3 always requires the following additional options: + +* ``rx_session=int`` - l2tpv3 32-bit integer session for rx packets + +* ``tx_session=int`` - l2tpv3 32-bit integer session for tx packets + +As the tunnel is fixed these are not negotiated and they are +preconfigured on both ends. + +Additionally, L2TPv3 supports the following optional parameters. + +* ``rx_cookie=int`` - l2tpv3 32-bit integer cookie for rx packets - same + functionality as GRE key, more to prevent misconfiguration than provide + actual security + +* ``tx_cookie=int`` - l2tpv3 32-bit integer cookie for tx packets + +* ``cookie64=[0,1]`` - use 64-bit cookies instead of 32-bit. + +* ``counter=[0,1]`` - enable l2tpv3 counter + +* ``pin_counter=[0,1]`` - pretend that the counter is always reset on + each packet (needed to interoperate with some really broken + implementations) + +* ``v6=[0,1]`` - force v6 sockets + +* ``udp=[0,1]`` - use raw sockets (0) or UDP (1) version of the protocol + +L2TPv3 has a number of caveats: + +* you can use only one connection per IP address in raw mode. There is + no way to multiplex connections as each L2TPv3 tunnel is terminated + directly on the UML instance. UDP mode can use different ports for + this purpose. + +Here is an example of how to configure a Linux host to connect to UML +via L2TPv3: + +**/etc/network/interfaces**:: + + auto l2tp1 + iface l2tp1 inet static + address 192.168.126.1 + netmask 255.255.255.0 + broadcast 192.168.126.255 + mtu 1500 + pre-up ip l2tp add tunnel remote 127.0.0.1 \ + local 127.0.0.1 encap udp tunnel_id 2 \ + peer_tunnel_id 2 udp_sport 1706 udp_dport 1707 && \ + ip l2tp add session name l2tp1 tunnel_id 2 \ + session_id 0xffffffff peer_session_id 0xffffffff + down ip l2tp del session tunnel_id 2 session_id 0xffffffff && \ + ip l2tp del tunnel tunnel_id 2 + + +Privileges required: L2TPv3 requires ``CAP_NET_RAW`` for raw IP mode and +no special privileges for the UDP mode. + +BESS socket transport +--------------------- + +BESS is a high performance modular network switch. + +https://github.com/NetSys/bess + +It has support for a simple sequential packet socket mode which in the +more recent versions is using vector IO for high performance. + +Example:: + + vecX:transport=bess,src=$unix_src,dst=$unix_dst + +This will configure a BESS transport using the unix_src Unix domain +socket address as source and unix_dst socket address as destination. + +For BESS configuration and how to allocate a BESS Unix domain socket port +please see the BESS documentation. + +https://github.com/NetSys/bess/wiki/Built-In-Modules-and-Ports + +BESS transport does not require any special privileges. + +Configuring Legacy transports +============================= + +Legacy transports are now considered obsolete. Please use the vector +versions. + +*********** +Running UML +*********** + +This section assumes that either the user-mode-linux package from the +distribution or a custom built kernel has been installed on the host. + +These add an executable called linux to the system. This is the UML +kernel. It can be run just like any other executable. +It will take most normal linux kernel arguments as command line +arguments. Additionally, it will need some UML-specific arguments +in order to do something useful. + +Arguments +========= + +Mandatory Arguments: +-------------------- + +* ``mem=int[K,M,G]`` - amount of memory. By default in bytes. It will + also accept K, M or G qualifiers. + +* ``ubdX[s,d,c,t]=`` virtual disk specification. This is not really + mandatory, but it is likely to be needed in nearly all cases so we can + specify a root file system. + The simplest possible image specification is the name of the image + file for the filesystem (created using one of the methods described + in `Creating an image`_). + + * UBD devices support copy on write (COW). The changes are kept in + a separate file which can be discarded allowing a rollback to the + original pristine image. If COW is desired, the UBD image is + specified as: ``cow_file,master_image``. + Example:``ubd0=Filesystem.cow,Filesystem.img`` + + * UBD devices can be set to use synchronous IO. Any writes are + immediately flushed to disk. This is done by adding ``s`` after + the ``ubdX`` specification. + + * UBD performs some heuristics on devices specified as a single + filename to make sure that a COW file has not been specified as + the image. To turn them off, use the ``d`` flag after ``ubdX``. + + * UBD supports TRIM - asking the Host OS to reclaim any unused + blocks in the image. To turn it off, specify the ``t`` flag after + ``ubdX``. + +* ``root=`` root device - most likely ``/dev/ubd0`` (this is a Linux + filesystem image) + +Important Optional Arguments +---------------------------- + +If UML is run as "linux" with no extra arguments, it will try to start an +xterm for every console configured inside the image (up to 6 in most +Linux distributions). Each console is started inside an +xterm. This makes it nice and easy to use UML on a host with a GUI. It is, +however, the wrong approach if UML is to be used as a testing harness or run +in a text-only environment. + +In order to change this behaviour we need to specify an alternative console +and wire it to one of the supported "line" channels. For this we need to map a +console to use something different from the default xterm. + +Example which will divert console number 1 to stdin/stdout:: + + con1=fd:0,fd:1 + +UML supports a wide variety of serial line channels which are specified using +the following syntax + + conX=channel_type:options[,channel_type:options] + + +If the channel specification contains two parts separated by comma, the first +one is input, the second one output. + +* The null channel - Discard all input or output. Example ``con=null`` will set + all consoles to null by default. + +* The fd channel - use file descriptor numbers for input/output. Example: + ``con1=fd:0,fd:1.`` + +* The port channel - start a telnet server on TCP port number. Example: + ``con1=port:4321``. The host must have /usr/sbin/in.telnetd (usually part of + a telnetd package) and the port-helper from the UML utilities (see the + information for the xterm channel below). UML will not boot until a client + connects. + +* The pty and pts channels - use system pty/pts. + +* The tty channel - bind to an existing system tty. Example: ``con1=/dev/tty8`` + will make UML use the host 8th console (usually unused). + +* The xterm channel - this is the default - bring up an xterm on this channel + and direct IO to it. Note that in order for xterm to work, the host must + have the UML distribution package installed. This usually contains the + port-helper and other utilities needed for UML to communicate with the xterm. + Alternatively, these need to be complied and installed from source. All + options applicable to consoles also apply to UML serial lines which are + presented as ttyS inside UML. + +Starting UML +============ + +We can now run UML. +:: + + # linux mem=2048M umid=TEST \ + ubd0=Filesystem.img \ + vec0:transport=tap,ifname=tap0,depth=128,gro=1 \ + root=/dev/ubda con=null con0=null,fd:2 con1=fd:0,fd:1 + +This will run an instance with ``2048M RAM`` and try to use the image file +called ``Filesystem.img`` as root. It will connect to the host using tap0. +All consoles except ``con1`` will be disabled and console 1 will +use standard input/output making it appear in the same terminal it was started. + +Logging in +============ + +If you have not set up a password when generating the image, you will have to +shut down the UML instance, mount the image, chroot into it and set it - as +described in the Generating an Image section. If the password is already set, +you can just log in. + +The UML Management Console +============================ + +In addition to managing the image from "the inside" using normal sysadmin tools, +it is possible to perform a number of low-level operations using the UML +management console. The UML management console is a low-level interface to the +kernel on a running UML instance, somewhat like the i386 SysRq interface. Since +there is a full-blown operating system under UML, there is much greater +flexibility possible than with the SysRq mechanism. + +There are a number of things you can do with the mconsole interface: + +* get the kernel version +* add and remove devices +* halt or reboot the machine +* Send SysRq commands +* Pause and resume the UML +* Inspect processes running inside UML +* Inspect UML internal /proc state + +You need the mconsole client (uml\_mconsole) which is a part of the UML +tools package available in most Linux distritions. + +You also need ``CONFIG_MCONSOLE`` (under 'General Setup') enabled in the UML +kernel. When you boot UML, you'll see a line like:: + + mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole + +If you specify a unique machine id on the UML command line, i.e. +``umid=debian``, you'll see this:: + + mconsole initialized on /home/jdike/.uml/debian/mconsole + + +That file is the socket that uml_mconsole will use to communicate with +UML. Run it with either the umid or the full path as its argument:: + + # uml_mconsole debian + +or + + # uml_mconsole /home/jdike/.uml/debian/mconsole + + +You'll get a prompt, at which you can run one of these commands: + +* version +* help +* halt +* reboot +* config +* remove +* sysrq +* help +* cad +* stop +* go +* proc +* stack + +version +------- + +This command takes no arguments. It prints the UML version:: + + (mconsole) version + OK Linux OpenWrt 4.14.106 #0 Tue Mar 19 08:19:41 2019 x86_64 + + +There are a couple actual uses for this. It's a simple no-op which +can be used to check that a UML is running. It's also a way of +sending a device interrupt to the UML. UML mconsole is treated internally as +a UML device. + +help +---- + +This command takes no arguments. It prints a short help screen with the +supported mconsole commands. + + +halt and reboot +--------------- + +These commands take no arguments. They shut the machine down immediately, with +no syncing of disks and no clean shutdown of userspace. So, they are +pretty close to crashing the machine:: + + (mconsole) halt + OK + +config +------ + +"config" adds a new device to the virtual machine. This is supported +by most UML device drivers. It takes one argument, which is the +device to add, with the same syntax as the kernel command line:: + + (mconsole) config ubd3=/home/jdike/incoming/roots/root_fs_debian22 + +remove +------ + +"remove" deletes a device from the system. Its argument is just the +name of the device to be removed. The device must be idle in whatever +sense the driver considers necessary. In the case of the ubd driver, +the removed block device must not be mounted, swapped on, or otherwise +open, and in the case of the network driver, the device must be down:: + + (mconsole) remove ubd3 + +sysrq +----- + +This command takes one argument, which is a single letter. It calls the +generic kernel's SysRq driver, which does whatever is called for by +that argument. See the SysRq documentation in +Documentation/admin-guide/sysrq.rst in your favorite kernel tree to +see what letters are valid and what they do. + +cad +--- + +This invokes the ``Ctl-Alt-Del`` action in the running image. What exactly +this ends up doing is up to init, systemd, etc. Normally, it reboots the +machine. + +stop +---- + +This puts the UML in a loop reading mconsole requests until a 'go' +mconsole command is received. This is very useful as a +debugging/snapshotting tool. + +go +-- + +This resumes a UML after being paused by a 'stop' command. Note that +when the UML has resumed, TCP connections may have timed out and if +the UML is paused for a long period of time, crond might go a little +crazy, running all the jobs it didn't do earlier. + +proc +---- + +This takes one argument - the name of a file in /proc which is printed +to the mconsole standard output + +stack +----- + +This takes one argument - the pid number of a process. Its stack is +printed to a standard output. + +******************* +Advanced UML Topics +******************* + +Sharing Filesystems between Virtual Machines +============================================ + +Don't attempt to share filesystems simply by booting two UMLs from the +same file. That's the same thing as booting two physical machines +from a shared disk. It will result in filesystem corruption. + +Using layered block devices +--------------------------- + +The way to share a filesystem between two virtual machines is to use +the copy-on-write (COW) layering capability of the ubd block driver. +Any changed blocks are stored in the private COW file, while reads come +from either device - the private one if the requested block is valid in +it, the shared one if not. Using this scheme, the majority of data +which is unchanged is shared between an arbitrary number of virtual +machines, each of which has a much smaller file containing the changes +that it has made. With a large number of UMLs booting from a large root +filesystem, this leads to a huge disk space saving. + +Sharing file system data will also help performance, since the host will +be able to cache the shared data using a much smaller amount of memory, +so UML disk requests will be served from the host's memory rather than +its disks. There is a major caveat in doing this on multisocket NUMA +machines. On such hardware, running many UML instances with a shared +master image and COW changes may cause issues like NMIs from excess of +inter-socket traffic. + +If you are running UML on high-end hardware like this, make sure to +bind UML to a set of logical CPUs residing on the same socket using the +``taskset`` command or have a look at the "tuning" section. + +To add a copy-on-write layer to an existing block device file, simply +add the name of the COW file to the appropriate ubd switch:: + + ubd0=root_fs_cow,root_fs_debian_22 + +where ``root_fs_cow`` is the private COW file and ``root_fs_debian_22`` is +the existing shared filesystem. The COW file need not exist. If it +doesn't, the driver will create and initialize it. + +Disk Usage +---------- + +UML has TRIM support which will release any unused space in its disk +image files to the underlying OS. It is important to use either ls -ls +or du to verify the actual file size. + +COW validity. +------------- + +Any changes to the master image will invalidate all COW files. If this +happens, UML will *NOT* automatically delete any of the COW files and +will refuse to boot. In this case the only solution is to either +restore the old image (including its last modified timestamp) or remove +all COW files which will result in their recreation. Any changes in +the COW files will be lost. + +Cows can moo - uml_moo : Merging a COW file with its backing file +----------------------------------------------------------------- + +Depending on how you use UML and COW devices, it may be advisable to +merge the changes in the COW file into the backing file every once in +a while. + +The utility that does this is uml_moo. Its usage is:: + + uml_moo COW_file new_backing_file + + +There's no need to specify the backing file since that information is +already in the COW file header. If you're paranoid, boot the new +merged file, and if you're happy with it, move it over the old backing +file. + +``uml_moo`` creates a new backing file by default as a safety measure. +It also has a destructive merge option which will merge the COW file +directly into its current backing file. This is really only usable +when the backing file only has one COW file associated with it. If +there are multiple COWs associated with a backing file, a -d merge of +one of them will invalidate all of the others. However, it is +convenient if you're short of disk space, and it should also be +noticeably faster than a non-destructive merge. + +``uml_moo`` is installed with the UML distribution packages and is +available as a part of UML utilities. + +Host file access +================== + +If you want to access files on the host machine from inside UML, you +can treat it as a separate machine and either nfs mount directories +from the host or copy files into the virtual machine with scp. +However, since UML is running on the host, it can access those +files just like any other process and make them available inside the +virtual machine without the need to use the network. +This is possible with the hostfs virtual filesystem. With it, you +can mount a host directory into the UML filesystem and access the +files contained in it just as you would on the host. + +*SECURITY WARNING* + +Hostfs without any parameters to the UML Image will allow the image +to mount any part of the host filesystem and write to it. Always +confine hostfs to a specific "harmless" directory (for example ``/var/tmp``) +if running UML. This is especially important if UML is being run as root. + +Using hostfs +------------ + +To begin with, make sure that hostfs is available inside the virtual +machine with:: + + # cat /proc/filesystems + +``hostfs`` should be listed. If it's not, either rebuild the kernel +with hostfs configured into it or make sure that hostfs is built as a +module and available inside the virtual machine, and insmod it. + + +Now all you need to do is run mount:: + + # mount none /mnt/host -t hostfs + +will mount the host's ``/`` on the virtual machine's ``/mnt/host``. +If you don't want to mount the host root directory, then you can +specify a subdirectory to mount with the -o switch to mount:: + + # mount none /mnt/home -t hostfs -o /home + +will mount the host's /home on the virtual machine's /mnt/home. + +hostfs as the root filesystem +----------------------------- + +It's possible to boot from a directory hierarchy on the host using +hostfs rather than using the standard filesystem in a file. +To start, you need that hierarchy. The easiest way is to loop mount +an existing root_fs file:: + + # mount root_fs uml_root_dir -o loop + + +You need to change the filesystem type of ``/`` in ``etc/fstab`` to be +'hostfs', so that line looks like this:: + + /dev/ubd/0 / hostfs defaults 1 1 + +Then you need to chown to yourself all the files in that directory +that are owned by root. This worked for me:: + + # find . -uid 0 -exec chown jdike {} \; + +Next, make sure that your UML kernel has hostfs compiled in, not as a +module. Then run UML with the boot device pointing at that directory:: + + ubd0=/path/to/uml/root/directory + +UML should then boot as it does normally. + +Hostfs Caveats +-------------- + +Hostfs does not support keeping track of host filesystem changes on the +host (outside UML). As a result, if a file is changed without UML's +knowledge, UML will not know about it and its own in-memory cache of +the file may be corrupt. While it is possible to fix this, it is not +something which is being worked on at present. + +Tuning UML +============ + +UML at present is strictly uniprocessor. It will, however spin up a +number of threads to handle various functions. + +The UBD driver, SIGIO and the MMU emulation do that. If the system is +idle, these threads will be migrated to other processors on a SMP host. +This, unfortunately, will usually result in LOWER performance because of +all of the cache/memory synchronization traffic between cores. As a +result, UML will usually benefit from being pinned on a single CPU, +especially on a large system. This can result in performance differences +of 5 times or higher on some benchmarks. + +Similarly, on large multi-node NUMA systems UML will benefit if all of +its memory is allocated from the same NUMA node it will run on. The +OS will *NOT* do that by default. In order to do that, the sysadmin +needs to create a suitable tmpfs ramdisk bound to a particular node +and use that as the source for UML RAM allocation by specifying it +in the TMP or TEMP environment variables. UML will look at the values +of ``TMPDIR``, ``TMP`` or ``TEMP`` for that. If that fails, it will +look for shmfs mounted under ``/dev/shm``. If everything else fails use +``/tmp/`` regardless of the filesystem type used for it:: + + mount -t tmpfs -ompol=bind:X none /mnt/tmpfs-nodeX + TEMP=/mnt/tmpfs-nodeX taskset -cX linux options options options.. + +******************************************* +Contributing to UML and Developing with UML +******************************************* + +UML is an excellent platform to develop new Linux kernel concepts - +filesystems, devices, virtualization, etc. It provides unrivalled +opportunities to create and test them without being constrained to +emulating specific hardware. + +Example - want to try how Linux will work with 4096 "proper" network +devices? + +Not an issue with UML. At the same time, this is something which +is difficult with other virtualization packages - they are +constrained by the number of devices allowed on the hardware bus +they are trying to emulate (for example 16 on a PCI bus in qemu). + +If you have something to contribute such as a patch, a bugfix, a +new feature, please send it to ``linux-um@lists.infradead.org``. + +Please follow all standard Linux patch guidelines such as cc-ing +relevant maintainers and run ``./scripts/checkpatch.pl`` on your patch. +For more details see ``Documentation/process/submitting-patches.rst`` + +Note - the list does not accept HTML or attachments, all emails must +be formatted as plain text. + +Developing always goes hand in hand with debugging. First of all, +you can always run UML under gdb and there will be a whole section +later on on how to do that. That, however, is not the only way to +debug a Linux kernel. Quite often adding tracing statements and/or +using UML specific approaches such as ptracing the UML kernel process +are significantly more informative. + +Tracing UML +============= + +When running, UML consists of a main kernel thread and a number of +helper threads. The ones of interest for tracing are NOT the ones +that are already ptraced by UML as a part of its MMU emulation. + +These are usually the first three threads visible in a ps display. +The one with the lowest PID number and using most CPU is usually the +kernel thread. The other threads are the disk +(ubd) device helper thread and the SIGIO helper thread. +Running ptrace on this thread usually results in the following picture:: + + host$ strace -p 16566 + --- SIGIO {si_signo=SIGIO, si_code=POLL_IN, si_band=65} --- + epoll_wait(4, [{EPOLLIN, {u32=3721159424, u64=3721159424}}], 64, 0) = 1 + epoll_wait(4, [], 64, 0) = 0 + rt_sigreturn({mask=[PIPE]}) = 16967 + ptrace(PTRACE_GETREGS, 16967, NULL, 0xd5f34f38) = 0 + ptrace(PTRACE_GETREGSET, 16967, NT_X86_XSTATE, [{iov_base=0xd5f35010, iov_len=832}]) = 0 + ptrace(PTRACE_GETSIGINFO, 16967, NULL, {si_signo=SIGTRAP, si_code=0x85, si_pid=16967, si_uid=0}) = 0 + ptrace(PTRACE_SETREGS, 16967, NULL, 0xd5f34f38) = 0 + ptrace(PTRACE_SETREGSET, 16967, NT_X86_XSTATE, [{iov_base=0xd5f35010, iov_len=2696}]) = 0 + ptrace(PTRACE_SYSEMU, 16967, NULL, 0) = 0 + --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_TRAPPED, si_pid=16967, si_uid=0, si_status=SIGTRAP, si_utime=65, si_stime=89} --- + wait4(16967, [{WIFSTOPPED(s) && WSTOPSIG(s) == SIGTRAP | 0x80}], WSTOPPED|__WALL, NULL) = 16967 + ptrace(PTRACE_GETREGS, 16967, NULL, 0xd5f34f38) = 0 + ptrace(PTRACE_GETREGSET, 16967, NT_X86_XSTATE, [{iov_base=0xd5f35010, iov_len=832}]) = 0 + ptrace(PTRACE_GETSIGINFO, 16967, NULL, {si_signo=SIGTRAP, si_code=0x85, si_pid=16967, si_uid=0}) = 0 + timer_settime(0, 0, {it_interval={tv_sec=0, tv_nsec=0}, it_value={tv_sec=0, tv_nsec=2830912}}, NULL) = 0 + getpid() = 16566 + clock_nanosleep(CLOCK_MONOTONIC, 0, {tv_sec=1, tv_nsec=0}, NULL) = ? ERESTART_RESTARTBLOCK (Interrupted by signal) + --- SIGALRM {si_signo=SIGALRM, si_code=SI_TIMER, si_timerid=0, si_overrun=0, si_value={int=1631716592, ptr=0x614204f0}} --- + rt_sigreturn({mask=[PIPE]}) = -1 EINTR (Interrupted system call) + +This is a typical picture from a mostly idle UML instance. + +* UML interrupt controller uses epoll - this is UML waiting for IO + interrupts: + + epoll_wait(4, [{EPOLLIN, {u32=3721159424, u64=3721159424}}], 64, 0) = 1 + +* The sequence of ptrace calls is part of MMU emulation and running the + UML userspace. +* ``timer_settime`` is part of the UML high res timer subsystem mapping + timer requests from inside UML onto the host high resolution timers. +* ``clock_nanosleep`` is UML going into idle (similar to the way a PC + will execute an ACPI idle). + +As you can see UML will generate quite a bit of output even in idle. The output +can be very informative when observing IO. It shows the actual IO calls, their +arguments and returns values. + +Kernel debugging +================ + +You can run UML under gdb now, though it will not necessarily agree to +be started under it. If you are trying to track a runtime bug, it is +much better to attach gdb to a running UML instance and let UML run. + +Assuming the same PID number as in the previous example, this would be:: + + # gdb -p 16566 + +This will STOP the UML instance, so you must enter `cont` at the GDB +command line to request it to continue. It may be a good idea to make +this into a gdb script and pass it to gdb as an argument. + +Developing Device Drivers +========================= + +Nearly all UML drivers are monolithic. While it is possible to build a +UML driver as a kernel module, that limits the possible functionality +to in-kernel only and non-UML specific. The reason for this is that +in order to really leverage UML, one needs to write a piece of +userspace code which maps driver concepts onto actual userspace host +calls. + +This forms the so-called "user" portion of the driver. While it can +reuse a lot of kernel concepts, it is generally just another piece of +userspace code. This portion needs some matching "kernel" code which +resides inside the UML image and which implements the Linux kernel part. + +*Note: There are very few limitations in the way "kernel" and "user" interact*. + +UML does not have a strictly defined kernel-to-host API. It does not +try to emulate a specific architecture or bus. UML's "kernel" and +"user" can share memory, code and interact as needed to implement +whatever design the software developer has in mind. The only +limitations are purely technical. Due to a lot of functions and +variables having the same names, the developer should be careful +which includes and libraries they are trying to refer to. + +As a result a lot of userspace code consists of simple wrappers. +E.g. ``os_close_file()`` is just a wrapper around ``close()`` +which ensures that the userspace function close does not clash +with similarly named function(s) in the kernel part. + +Using UML as a Test Platform +============================ + +UML is an excellent test platform for device driver development. As +with most things UML, "some user assembly may be required". It is +up to the user to build their emulation environment. UML at present +provides only the kernel infrastructure. + +Part of this infrastructure is the ability to load and parse fdt +device tree blobs as used in Arm or Open Firmware platforms. These +are supplied as an optional extra argument to the kernel command +line:: + + dtb=filename + +The device tree is loaded and parsed at boottime and is accessible by +drivers which query it. At this moment in time this facility is +intended solely for development purposes. UML's own devices do not +query the device tree. + +Security Considerations +----------------------- + +Drivers or any new functionality should default to not +accepting arbitrary filename, bpf code or other parameters +which can affect the host from inside the UML instance. +For example, specifying the socket used for IPC communication +between a driver and the host at the UML command line is OK +security-wise. Allowing it as a loadable module parameter +isn't. + +If such functionality is desirable for a particular application +(e.g. loading BPF "firmware" for raw socket network transports), +it should be off by default and should be explicitly turned on +as a command line parameter at startup. + +Even with this in mind, the level of isolation between UML +and the host is relatively weak. If the UML userspace is +allowed to load arbitrary kernel drivers, an attacker can +use this to break out of UML. Thus, if UML is used in +a production application, it is recommended that all modules +are loaded at boot and kernel module loading is disabled +afterwards. |