Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 388 insertions, 0 deletions

diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
new file mode 100644
index 0000000000..774c03cc1d
--- /dev/null
+++ b/arch/arc/kernel/entry-compact.S
@@ -0,0 +1,388 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARCompact ISA
+ *
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * vineetg: May 2011
+ *  -Userspace unaligned access emulation
+ *
+ * vineetg: Feb 2011 (ptrace low level code fixes)
+ *  -traced syscall return code (r0) was not saved into pt_regs for restoring
+ *   into user reg-file when traded task rets to user space.
+ *  -syscalls needing arch-wrappers (mainly for passing sp as pt_regs)
+ *   were not invoking post-syscall trace hook (jumping directly into
+ *   ret_from_system_call)
+ *
+ * vineetg: Nov 2010:
+ *  -Vector table jumps (@8 bytes) converted into branches (@4 bytes)
+ *  -To maintain the slot size of 8 bytes/vector, added nop, which is
+ *   not executed at runtime.
+ *
+ * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
+ *  -do_signal()invoked upon TIF_RESTORE_SIGMASK as well
+ *  -Wrappers for sys_{,rt_}sigsuspend() no longer needed as they don't
+ *   need ptregs anymore
+ *
+ * Vineetg: Oct 2009
+ *  -In a rare scenario, Process gets a Priv-V exception and gets scheduled
+ *   out. Since we don't do FAKE RTIE for Priv-V, CPU exception state remains
+ *   active (AE bit enabled).  This causes a double fault for a subseq valid
+ *   exception. Thus FAKE RTIE needed in low level Priv-Violation handler.
+ *   Instr Error could also cause similar scenario, so same there as well.
+ *
+ * Vineetg: March 2009 (Supporting 2 levels of Interrupts)
+ *
+ * Vineetg: Aug 28th 2008: Bug #94984
+ *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
+ *   Normally CPU does this automatically, however when doing FAKE rtie,
+ *   we need to explicitly do this. The problem in macros
+ *   FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
+ *   was being "CLEARED" rather then "SET". Since it is Loop INHIBIT Bit,
+ *   setting it and not clearing it clears ZOL context
+ *
+ * Vineetg: May 16th, 2008
+ *  - r25 now contains the Current Task when in kernel
+ *
+ * Vineetg: Dec 22, 2007
+ *    Minor Surgery of Low Level ISR to make it SMP safe
+ *    - MMU_SCRATCH0 Reg used for freeing up r9 in Level 1 ISR
+ *    - _current_task is made an array of NR_CPUS
+ *    - Access of _current_task wrapped inside a macro so that if hardware
+ *       team agrees for a dedicated reg, no other code is touched
+ *
+ * Amit Bhor, Rahul Trivedi, Kanika Nema, Sameer Dhavale : Codito Tech 2004
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>	/* {ENTRY,EXIT} */
+#include <asm/entry.h>
+#include <asm/irqflags.h>
+
+	.cpu A7
+
+;############################ Vector Table #################################
+
+.macro VECTOR  lbl
+#if 1   /* Just in case, build breaks */
+	j   \lbl
+#else
+	b   \lbl
+	nop
+#endif
+.endm
+
+	.section .vector, "ax",@progbits
+	.align 4
+
+/* Each entry in the vector table must occupy 2 words. Since it is a jump
+ * across sections (.vector to .text) we are guaranteed that 'j somewhere'
+ * will use the 'j limm' form of the instruction as long as somewhere is in
+ * a section other than .vector.
+ */
+
+; ********* Critical System Events **********************
+VECTOR   res_service             ; 0x0, Reset Vector	(0x0)
+VECTOR   mem_service             ; 0x8, Mem exception   (0x1)
+VECTOR   instr_service           ; 0x10, Instrn Error   (0x2)
+
+; ******************** Device ISRs **********************
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+VECTOR   handle_interrupt_level2
+#else
+VECTOR   handle_interrupt_level1
+#endif
+
+.rept   28
+VECTOR   handle_interrupt_level1 ; Other devices
+.endr
+
+/* FOR ARC600: timer = 0x3, uart = 0x8, emac = 0x10 */
+
+; ******************** Exceptions **********************
+VECTOR   EV_MachineCheck         ; 0x100, Fatal Machine check   (0x20)
+VECTOR   EV_TLBMissI             ; 0x108, Instruction TLB miss  (0x21)
+VECTOR   EV_TLBMissD             ; 0x110, Data TLB miss         (0x22)
+VECTOR   EV_TLBProtV             ; 0x118, Protection Violation  (0x23)
+				 ;         or Misaligned Access
+VECTOR   EV_PrivilegeV           ; 0x120, Privilege Violation   (0x24)
+VECTOR   EV_Trap                 ; 0x128, Trap exception        (0x25)
+VECTOR   EV_Extension            ; 0x130, Extn Instruction Excp (0x26)
+
+.rept   24
+VECTOR   reserved                ; Reserved Exceptions
+.endr
+
+
+;##################### Scratch Mem for IRQ stack switching #############
+
+ARCFP_DATA int1_saved_reg
+	.align 32
+	.type   int1_saved_reg, @object
+	.size   int1_saved_reg, 4
+int1_saved_reg:
+	.zero 4
+
+/* Each Interrupt level needs its own scratch */
+ARCFP_DATA int2_saved_reg
+	.type   int2_saved_reg, @object
+	.size   int2_saved_reg, 4
+int2_saved_reg:
+	.zero 4
+
+; ---------------------------------------------
+	.section .text, "ax",@progbits
+
+
+reserved:
+	flag 1		; Unexpected event, halt
+
+;##################### Interrupt Handling ##############################
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+; ---------------------------------------------
+;  Level 2 ISR: Can interrupt a Level 1 ISR
+; ---------------------------------------------
+ENTRY(handle_interrupt_level2)
+
+	INTERRUPT_PROLOGUE 2
+
+	;------------------------------------------------------
+	; if L2 IRQ interrupted a L1 ISR, disable preemption
+	;
+	; This is to avoid a potential L1-L2-L1 scenario
+	;  -L1 IRQ taken
+	;  -L2 interrupts L1 (before L1 ISR could run)
+	;  -preemption off IRQ, user task in syscall picked to run
+	;  -RTIE to userspace
+	;	Returns from L2 context fine
+	;	But both L1 and L2 re-enabled, so another L1 can be taken
+	;	while prev L1 is still unserviced
+	;
+	;------------------------------------------------------
+
+	; L2 interrupting L1 implies both L2 and L1 active
+	; However both A2 and A1 are NOT set in STATUS32, thus
+	; need to check STATUS32_L2 to determine if L1 was active
+
+	ld r9, [sp, PT_status32]        ; get statu32_l2 (saved in pt_regs)
+	bbit0 r9, STATUS_A1_BIT, 1f     ; L1 not active when L2 IRQ, so normal
+
+	; bump thread_info->preempt_count (Disable preemption)
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+	add     r9, r9, 1
+	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+1:
+	;------------------------------------------------------
+	; setup params for Linux common ISR and invoke it
+	;------------------------------------------------------
+	lr  r0, [icause2]
+	and r0, r0, 0x1f
+
+	bl.d  @arch_do_IRQ
+	mov r1, sp
+
+	mov r8,0x2
+	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg
+
+	b   ret_from_exception
+
+END(handle_interrupt_level2)
+
+#endif
+
+; ---------------------------------------------
+; User Mode Memory Bus Error Interrupt Handler
+; (Kernel mode memory errors handled via separate exception vectors)
+; ---------------------------------------------
+ENTRY(mem_service)
+
+	INTERRUPT_PROLOGUE 2
+
+	mov r0, ilink2
+	mov r1, sp
+
+	; User process needs to be killed with SIGBUS, but first need to get
+	; out of the L2 interrupt context (drop to pure kernel mode) and jump
+	; off to "C" code where SIGBUS in enqueued
+	lr  r3, [status32]
+	bclr r3, r3, STATUS_A2_BIT
+	or  r3, r3, (STATUS_E1_MASK|STATUS_E2_MASK)
+	sr  r3, [status32_l2]
+	mov ilink2, 1f
+	rtie
+1:
+	bl  do_memory_error
+	b   ret_from_exception
+END(mem_service)
+
+; ---------------------------------------------
+;  Level 1 ISR
+; ---------------------------------------------
+ENTRY(handle_interrupt_level1)
+
+	INTERRUPT_PROLOGUE 1
+
+	lr  r0, [icause1]
+	and r0, r0, 0x1f
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	; icause1 needs to be read early, before calling tracing, which
+	; can clobber scratch regs, hence use of stack to stash it
+	push r0
+	TRACE_ASM_IRQ_DISABLE
+	pop  r0
+#endif
+
+	bl.d  @arch_do_IRQ
+	mov r1, sp
+
+	mov r8,0x1
+	sr r8, [AUX_IRQ_LV12]       ; clear bit in Sticky Status Reg
+
+	b   ret_from_exception
+END(handle_interrupt_level1)
+
+;################### Non TLB Exception Handling #############################
+
+; ---------------------------------------------
+; Protection Violation Exception Handler
+; ---------------------------------------------
+
+ENTRY(EV_TLBProtV)
+
+	EXCEPTION_PROLOGUE	; ECR returned in r10
+
+	;------ (5) Type of Protection Violation? ----------
+	;
+	; ProtV Hardware Exception is triggered for Access Faults of 2 types
+	;   -Access Violation	: 00_23_(00|01|02|03)_00
+	;			         x  r  w  r+w
+	;   -Unaligned Access	: 00_23_04_00
+	bbit1 r10, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
+
+	;========= (6a) Access Violation Processing ========
+	bl  do_page_fault
+	b   ret_from_exception
+
+	;========== (6b) Non aligned access ============
+4:
+
+	SAVE_CALLEE_SAVED_USER
+	mov r2, sp              ; callee_regs
+
+	bl  do_misaligned_access
+
+	; TBD: optimize - do this only if a callee reg was involved
+	; either a dst of emulated LD/ST or src with address-writeback
+	RESTORE_CALLEE_SAVED_USER
+
+	b   ret_from_exception
+
+END(EV_TLBProtV)
+
+; Wrapper for Linux page fault handler called from EV_TLBMiss*
+; Very similar to ProtV handler case (6a) above, but avoids the extra checks
+; for Misaligned access
+;
+ENTRY(call_do_page_fault)
+
+	EXCEPTION_PROLOGUE
+
+	mov blink, ret_from_exception
+	b  do_page_fault
+
+END(call_do_page_fault)
+
+;############# Common Handlers for ARCompact and ARCv2 ##############
+
+#include "entry.S"
+
+;############# Return from Intr/Excp/Trap (ARC Specifics) ##############
+;
+; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap)
+; IRQ shd definitely not happen between now and rtie
+; All 2 entry points to here already disable interrupts
+
+.Lrestore_regs:
+
+	# Interrupts are actually disabled from this point on, but will get
+	# reenabled after we return from interrupt/exception.
+	# But irq tracer needs to be told now...
+	TRACE_ASM_IRQ_ENABLE
+
+	lr	r10, [status32]
+
+	; Restore REG File. In case multiple Events outstanding,
+	; use the same priority as rtie: EXCPN, L2 IRQ, L1 IRQ, None
+	; Note that we use realtime STATUS32 (not pt_regs->status32) to
+	; decide that.
+
+	and.f	0, r10, (STATUS_A1_MASK|STATUS_A2_MASK)
+	bz	.Lexcep_or_pure_K_ret
+
+	; Returning from Interrupts (Level 1 or 2)
+
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+
+	; Level 2 interrupt return Path - from hardware standpoint
+	bbit0  r10, STATUS_A2_BIT, not_level2_interrupt
+
+	;------------------------------------------------------------------
+	; However the context returning might not have taken L2 intr itself
+	; e.g. Task'A' user-code -> L2 intr -> schedule -> 'B' user-code ret
+	; Special considerations needed for the context which took L2 intr
+
+	ld   r9, [sp, PT_event]        ; Ensure this is L2 intr context
+	brne r9, event_IRQ2, 149f
+
+	;------------------------------------------------------------------
+	; if L2 IRQ interrupted an L1 ISR,  we'd disabled preemption earlier
+	; so that sched doesn't move to new task, causing L1 to be delayed
+	; undeterministically. Now that we've achieved that, let's reset
+	; things to what they were, before returning from L2 context
+	;----------------------------------------------------------------
+
+	ld r9, [sp, PT_status32]       ; get statu32_l2 (saved in pt_regs)
+	bbit0 r9, STATUS_A1_BIT, 149f  ; L1 not active when L2 IRQ, so normal
+
+	; decrement thread_info->preempt_count (re-enable preemption)
+	GET_CURR_THR_INFO_FROM_SP   r10
+	ld      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+	; paranoid check, given A1 was active when A2 happened, preempt count
+	; must not be 0 because we would have incremented it.
+	; If this does happen we simply HALT as it means a BUG !!!
+	cmp     r9, 0
+	bnz     2f
+	flag 1
+
+2:
+	sub     r9, r9, 1
+	st      r9, [r10, THREAD_INFO_PREEMPT_COUNT]
+
+149:
+	INTERRUPT_EPILOGUE 2	; return from level 2 interrupt
+debug_marker_l2:
+	rtie
+
+not_level2_interrupt:
+
+#endif
+
+	INTERRUPT_EPILOGUE 1	; return from level 1 interrupt
+debug_marker_l1:
+	rtie
+
+.Lexcep_or_pure_K_ret:
+
+	;this case is for syscalls or Exceptions or pure kernel mode
+
+	EXCEPTION_EPILOGUE
+debug_marker_syscall:
+	rtie
+
+END(ret_from_exception)