diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm/boot/dts/nxp/ls | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/boot/dts/nxp/ls')
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/Makefile | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts | 227 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts | 237 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts | 326 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts | 405 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi | 107 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts | 295 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts | 240 | ||||
-rw-r--r-- | arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 987 |
9 files changed, 2832 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/ls/Makefile b/arch/arm/boot/dts/nxp/ls/Makefile new file mode 100644 index 0000000000..14759331db --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-iot.dtb \ + ls1021a-moxa-uc-8410a.dtb \ + ls1021a-qds.dtb \ + ls1021a-tqmls1021a-mbls1021a.dtb \ + ls1021a-tsn.dtb \ + ls1021a-twr.dtb diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts new file mode 100644 index 0000000000..e13ccae629 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021-2022 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + }; + }; +}; + +&can0 { + status = "disabled"; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sgtl5000: audio-codec@2a { + #sound-dai-cells = <0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk>; + }; + + max1239: adc@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + ina2201: core-monitor@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina2202: current-monitor@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b: thermal-monitor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + s25fl128s: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts new file mode 100644 index 0000000000..d2cae8c7d7 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-moxa-uc-8410a.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/ + * + * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com> + * Jimmy Chen (陳永達) <jimmy.chen@moxa.com> + * SZ Lin (林上智) <sz.lin@moxa.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "ls1021a.dtsi" + +/ { + model = "Moxa UC-8410A"; + compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a"; + + aliases { + enet0_rgmii_phy = &rgmii_phy0; + enet1_rgmii_phy = &rgmii_phy1; + enet2_rgmii_phy = &rgmii_phy2; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + cel-pwr { + label = "UC8410A:CEL-PWR"; + gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + cel-reset { + label = "UC8410A:CEL-RESET"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + str-led { + label = "UC8410A:RED:PROG"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + sw-ready { + label = "UC8410A:GREEN:SWRDY"; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + beeper { + label = "UC8410A:BEEP"; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led0 { + label = "UC8410A:GREEN:PROG2"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led1 { + label = "UC8410A:GREEN:PROG1"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + prog-led2 { + label = "UC8410A:GREEN:PROG0"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal0 { + label = "UC8410A:GREEN:CEL2"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal1 { + label = "UC8410A:GREEN:CEL1"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + wifi-signal2 { + label = "UC8410A:GREEN:CEL0"; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-red { + label = "UC8410A:RED:DIA"; + gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-green { + label = "UC8410A:GREEN:DIA"; + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + cpu-diag-yellow { + label = "UC8410A:YELLOW:DIA"; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pushbtn-key { + label = "push button key"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + default-state = "on"; + }; + }; +}; + +&enet0 { + phy-handle = <&rgmii_phy0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet1 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + tpm@20 { + compatible = "infineon,slb9635tt"; + reg = <0x20>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "marvell,88e1118"; + reg = <0x0>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy1: ethernet-phy@1 { + compatible = "marvell,88e1118"; + reg = <0x1>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; + + rgmii_phy2: ethernet-phy@2 { + compatible = "marvell,88e1118"; + reg = <0x2>; + marvell,reg-init = + <3 0x11 0 0x4415>, /* Reg 3,17 */ + <3 0x10 0 0x77>; /* Reg 3,16 */ + }; +}; + +&qspi { + status = "okay"; + + flash: flash@0 { + compatible = "spansion,s25fl064l", "spansion,s25fl164k"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + + partitions@0 { + label = "U-Boot"; + reg = <0x0 0x180000>; + }; + + partitions@180000 { + label = "U-Boot Env"; + reg = <0x180000 0x680000>; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts new file mode 100644 index 0000000000..f1acb97aee --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A QDS Board"; + compatible = "fsl,ls1021a-qds", "fsl,ls1021a"; + + aliases { + enet0_rgmii_phy = &rgmii_phy1; + enet1_rgmii_phy = &rgmii_phy2; + enet2_rgmii_phy = &rgmii_phy3; + enet0_sgmii_phy = &sgmii_phy1c; + enet1_sgmii_phy = &sgmii_phy1d; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + dspiflash: at45db021d@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy1c>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy1d>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy3>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9547: mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + adt7461a@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + codec: sgtl5000@2a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&sys_mclk>; + }; + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>, + <0x2 0x0 0x0 0x7e800000 0x00010000>, + <0x3 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + big-endian; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-mfd"; + reg = <0x3 0x0 0x0000100>; + bank-width = <1>; + device-width = <1>; + ranges = <0 3 0 0x100>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1[2:0] */ + + /* Onboard PHYs */ + ls1021amdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + ls1021amdio1: mdio@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + ls1021amdio2: mdio@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ls1021amdio3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy1c: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + ls1021amdio4: mdio@80 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy1d: ethernet-phy@1d { + reg = <0x1d>; + }; + }; + }; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts new file mode 100644 index 0000000000..34636fcdfd --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/net/ti-dp83867.h> + +#include "ls1021a-tqmls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM on MBLS102xA"; + compatible = "tq,ls1021a-tqmls1021a-mbls102xa", "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + audio_mclk: audio-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + backlight_dcu: backlight { + compatible = "gpio-backlight"; + gpios = <&pca9530 0 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-1 { + label = "S6"; + linux,code = <BTN_0>; + gpios = <&pca9554_0 0 GPIO_ACTIVE_LOW>; + }; + + btn2: switch-2 { + label = "S7"; + linux,code = <BTN_1>; + gpios = <&pca9554_0 1 GPIO_ACTIVE_LOW>; + }; + + switch-3 { + label = "S8"; + linux,code = <BTN_2>; + gpios = <&pca9554_0 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <0>; + gpios = <&pca9554_2 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <1>; + gpios = <&pca9554_2 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + function-enumerator = <2>; + gpios = <&pca9554_2 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + gpios = <&pca9554_2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + lvds_encoder: lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + power-supply = <®_3p3v>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + lvds_encoder_out: endpoint {}; + }; + }; + }; + + reg_1p2v: regulator-1p2v { + compatible = "regulator-fixed"; + regulator-name = "1P2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <®_3p3v>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_out: hdmi { + compatible = "hdmi-connector"; + type = "a"; + ddc-i2c-bus = <&i2c0>; + status = "disabled"; + + port { + hdmi_in: endpoint { + remote-endpoint = <&sii9022a_out>; + }; + }; + }; + + display: panel { + backlight = <&backlight_dcu>; + enable-gpios = <&pca9554_1 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + panel_in: endpoint {}; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "ls1021a-mbls1021a-tlv320aic32"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + }; + +}; + +&can0 { + xceiver-supply = <®_3p3v>; + status = "okay"; +}; + +&can1 { + xceiver-supply = <®_3p3v>; + status = "okay"; +}; + +&dspi0 { + status = "okay"; +}; + +&enet0 { + phy-handle = <&rgmii_phy0c>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy03>; + phy-mode = "sgmii"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy04>; + phy-mode = "rgmii-id"; + mac-address = [ 00 00 00 00 00 00 ]; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&audio_mclk>; + clock-names = "mclk"; + ldoin-supply = <®_3p3v>; + iov-supply = <®_3p3v>; + }; + + pca9554_0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "BUTTON0", "BUTTON1", + "BUTTON2", "EMMC_SEL", + "DIP2", "DIP3", + "EXT_TOUCH_INT", "GPIO_1"; + }; + + pca9554_1: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "PCIE_PWR_EN", "MPCIE_DISABLE#", + "MPCIE_WAKE#", "LCD_BLT_EN", + "LCD_PWR_EN", "EC1_PHY_PWDN", + "EC3_PHY_PWDN", "SGMII_PHY_PWDN"; + }; + + pca9554_2: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&extirq>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + vcc-supply = <®_3p3v>; + gpio-line-names = "MUX_SEL0", "MUX_SEL1", + "MUX_SEL2", "MUX_SEL3", + "V95", "V96", "V97", "V98"; + }; + + sii9022a: hdmi-transmitter@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + iovcc-supply = <®_3p3v>; + cvcc12-supply = <®_1p2v>; + interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>; + #sound-dai-cells = <0>; + sil,i2s-data-lanes = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022a_in: endpoint {}; + }; + + port@1 { + reg = <1>; + + sii9022a_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + + stmpe811: port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupt-parent = <&gpio0>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_3p3v>; + vio-supply = <®_3p3v>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + /* GPIO 5-7 used for touch */ + st,norequest-mask = <0xf0>; + gpio-line-names = "GPIO_ADC_I2C1_1", + "GPIO_ADC_I2C1_2", + "GPIO_ADC_I2C1_3", + "GPIO_ADC_I2C1_4"; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + status = "disabled"; + }; + }; + + pca9530: leds@60 { + compatible = "nxp,pca9530"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "PWM_0", "PWM_1"; + + led-0 { + type = <PCA9532_TYPE_GPIO>; + }; + + led-1 { + type = <PCA9532_TYPE_GPIO>; + }; + }; + +}; + +&i2c1 { + status = "okay"; +}; + +&lpuart0 { + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&mdio0 { + sgmii_phy03: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x03>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,dp83867-rxctrl-strap-quirk; + }; + + rgmii_phy04: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x04>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + rgmii_phy0c: ethernet-phy@c { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0c>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&sai1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb3 { + /* + * Although DR connector, VBUS is always driven, so + * restrict to host mode. + */ + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi new file mode 100644 index 0000000000..1b13851ad9 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +#include "ls1021a.dtsi" + +/ { + model = "TQMLS102xA SOM"; + compatible = "tq,ls1021a-tqmls1021a", "fsl,ls1021a"; + + reg_3p3v_som: regulator-3p3v-som { + compatible = "regulator-fixed"; + regulator-name = "3P3V_SOM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&esdhc { + /* e-MMC over 8 data lines */ + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* MC34VR500 DC/DC regulator at 0x8, managed by PMIC */ + /* On-board PMC at 0x11 */ + + sa56004: temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <®_3p3v_som>; + }; + + rtc0: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; + }; + + m24c64_54: eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + read-only; + vcc-supply = <®_3p3v_som>; + }; +}; + +&mdio0 { + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + qflash0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot@0 { + label = "U-Boot-PBL"; + reg = <0x0 0xe0000>; + }; + + env@e0000 { + label = "U-Boot Environment"; + reg = <0xe0000 0x10000>; + }; + + dtb@f0000 { + label = "DTB"; + reg = <0xf0000 0x10000>; + }; + + linux@100000 { + label = "Linux"; + reg = <0x100000 0x700000>; + }; + + rootfs@800000 { + label = "RootFS"; + reg = <0x800000 0x3800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts new file mode 100644 index 0000000000..1ea32fff41 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts @@ -0,0 +1,295 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + compatible = "fsl,ls1021a-tsn", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + /* SGMII1_PHY_INT_B: connected to IRQ2, active low */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + /* SGMII2_PHY_INT_B: connected to IRQ2, active low */ + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts new file mode 100644 index 0000000000..f5c03871b2 --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A TWR Board"; + compatible = "fsl,ls1021a-twr", "fsl,ls1021a"; + + aliases { + enet2_rgmii_phy = &rgmii_phy1; + enet0_sgmii_phy = &sgmii_phy2; + enet1_sgmii_phy = &sgmii_phy0; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; + + panel: panel { + compatible = "nec,nl4827hc19-05b"; + + port { + panel_in: endpoint { + remote-endpoint = <&dcu_out>; + }; + }; + }; +}; + +&dcu { + status = "okay"; + + port { + dcu_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + + dspiflash: s25fl064k@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl064k"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + +}; + +&i2c1 { + status = "okay"; + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&sys_mclk>; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR Flash on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + big-endian; + bank-width = <2>; + device-width = <1>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + sgmii_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&esdhc { + status = "okay"; +}; + +&qspi { + status = "okay"; + + n25q128a130: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&sai1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +&can3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi new file mode 100644 index 0000000000..49c78c84cd --- /dev/null +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -0,0 +1,987 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + aliases { + crypto = &crypto; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + rtc1 = &ftm_alarm0; + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + serial4 = &lpuart4; + serial5 = &lpuart5; + sysclk = &sysclk; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + clocks = <&clockgen 1 0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@f01 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf01>; + clocks = <&clockgen 1 0>; + #cooling-cells = <2>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + device_type = "soc"; + interrupt-parent = <&gic>; + ranges; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400", "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0x0 0x1000>, + <0x0 0x1402000 0x0 0x2000>, + <0x0 0x1404000 0x0 0x2000>, + <0x0 0x1406000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + + }; + + msi1: msi-controller@1570e00 { + compatible = "fsl,ls1021a-msi"; + reg = <0x0 0x1570e00 0x0 0x8>; + msi-controller; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + }; + + msi2: msi-controller@1570e08 { + compatible = "fsl,ls1021a-msi"; + reg = <0x0 0x1570e08 0x0 0x8>; + msi-controller; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + }; + + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; + reg = <0x0 0x1530000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sfp: efuse@1e80000 { + compatible = "fsl,ls1021a-sfp"; + reg = <0x0 0x1e80000 0x0 0x10000>; + clocks = <&clockgen 4 3>; + clock-names = "sfp"; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x0 0x1ee0000 0x0 0x1000>; + big-endian; + }; + + qspi: spi@1550000 { + compatible = "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x20000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + status = "disabled"; + }; + + esdhc: esdhc@1560000 { + compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + status = "disabled"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1021a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20220520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + dma-coherent; + status = "disabled"; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x7 0x0>; + }; + }; + + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <7>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x1700000 0x0 0x100000>; + ranges = <0x0 0x0 0x1700000 0x100000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + }; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1021a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; + fsl,tmu-calibration = <0x00000000 0x00000020>, + <0x00000001 0x00000024>, + <0x00000002 0x0000002a>, + <0x00000003 0x00000032>, + <0x00000004 0x00000038>, + <0x00000005 0x0000003e>, + <0x00000006 0x00000043>, + <0x00000007 0x0000004a>, + <0x00000008 0x00000050>, + <0x00000009 0x00000059>, + <0x0000000a 0x0000005f>, + <0x0000000b 0x00000066>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006f>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000048>, + <0x00020004 0x00000054>, + <0x00020005 0x00000060>, + <0x00020006 0x0000006c>, + + <0x00030000 0x00000025>, + <0x00030001 0x00000033>, + <0x00030002 0x00000043>, + <0x00030003 0x00000055>; + #thermal-sensor-cells = <1>; + }; + + dspi0: spi@2100000 { + compatible = "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <6>; + big-endian; + status = "disabled"; + }; + + dspi1: spi@2110000 { + compatible = "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <6>; + big-endian; + status = "disabled"; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 38>, <&edma0 1 39>; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 36>, <&edma0 1 37>; + status = "disabled"; + }; + + i2c2: i2c@21a0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21a0000 0x0 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + dma-names = "rx", "tx"; + dmas = <&edma0 1 34>, <&edma0 1 35>; + status = "disabled"; + }; + + uart0: serial@21c0500 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart1: serial@21c0600 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart2: serial@21d0500 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart3: serial@21d0600 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + counter0: counter@29d0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29d0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter1: counter@29e0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29e0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter2: counter@29f0000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x29f0000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + counter3: counter@2a00000 { + compatible = "fsl,ftm-quaddec"; + reg = <0x0 0x2a00000 0x0 0x10000>; + big-endian; + status = "disabled"; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart1: serial@2960000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2960000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@2970000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2970000 0x0 0x1000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart3: serial@2980000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2980000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@2990000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2990000 0x0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@29a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x29a0000 0x0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + pwm0: pwm@29d0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29d0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm1: pwm@29e0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29e0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm2: pwm@29f0000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x29f0000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm3: pwm@2a00000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a00000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm4: pwm@2a10000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a10000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm5: pwm@2a20000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a20000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm6: pwm@2a30000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a30000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + pwm7: pwm@2a40000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x0 0x2a40000 0x0 0x10000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + + wdog0: watchdog@2ad0000 { + compatible = "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "wdog-en"; + big-endian; + }; + + sai1: sai@2b50000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b50000 0x0 0x10000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 47>, + <&edma0 1 46>; + status = "disabled"; + }; + + sai2: sai@2b60000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b60000 0x0 0x10000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 45>, + <&edma0 1 44>; + status = "disabled"; + }; + + edma0: dma-controller@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + + dcu: dcu@2ce0000 { + compatible = "fsl,ls1021a-dcu"; + reg = <0x0 0x2ce0000 0x0 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>, + <&clockgen 4 0>; + clock-names = "dcu", "pix"; + big-endian; + status = "disabled"; + }; + + mdio0: mdio@2d24000 { + compatible = "gianfar"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d24000 0x0 0x4000>, + <0x0 0x2d10030 0x0 0x4>; + }; + + mdio1: mdio@2d64000 { + compatible = "gianfar"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d64000 0x0 0x4000>, + <0x0 0x2d50030 0x0 0x4>; + }; + + ptp_clock@2d10e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x0 0x2d10e00 0x0 0xb0>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <999999995>; + fsl,max-adj = <499999999>; + fsl,extts-fifo; + }; + + enet0: ethernet@2d10000 { + compatible = "fsl,etsec2"; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + fsl,magic-packet; + ranges; + dma-coherent; + + queue-group@2d10000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d10000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d14000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d14000 0x0 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + enet1: ethernet@2d50000 { + compatible = "fsl,etsec2"; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + ranges; + dma-coherent; + + queue-group@2d50000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d50000 0x0 0x1000>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d54000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d54000 0x0 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + enet2: ethernet@2d90000 { + compatible = "fsl,etsec2"; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + ranges; + dma-coherent; + + queue-group@2d90000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d90000 0x0 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d94000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d94000 0x0 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + usb2: usb@8600000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + reg = <0x0 0x8600000 0x0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + usb3: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + pcie@3400000 { + compatible = "fsl,ls1021a-pcie"; + reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */ + <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + fsl,pcie-scfg = <&scfg 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-viewport = <6>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>, <&msi2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie@3500000 { + compatible = "fsl,ls1021a-pcie"; + reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */ + <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + fsl,pcie-scfg = <&scfg 1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-viewport = <6>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */ + <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>, <&msi2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + can0: can@2a70000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a70000 0x0 0x1000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + can1: can@2a80000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a80000 0x0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + can2: can@2a90000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a90000 0x0 0x1000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + can3: can@2aa0000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2aa0000 0x0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + ocram1: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x0 0x10000000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x10000000 0x10000>; + }; + + ocram2: sram@10010000 { + compatible = "mmio-sram"; + reg = <0x0 0x10010000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x10010000 0x10000>; + }; + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + #dma-cells = <2>; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x8>; + #fsl,rcpm-wakeup-cells = <2>; + #power-domain-cells = <0>; + }; + + ftm_alarm0: timer0@29d0000 { + compatible = "fsl,ls1021a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + reg-names = "ftm"; + fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; |