diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom/qcom-sdx55.dtsi')
-rw-r--r-- | arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 881 |
1 files changed, 881 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi new file mode 100644 index 0000000000..5b86b4de1a --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -0,0 +1,881 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX55 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +#include <dt-bindings/clock/qcom,gcc-sdx55.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sdx55.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX55_CX>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx55", "qcom,scm"; + }; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + hyp_mem: memory@8fc00000 { + no-map; + reg = <0x8fc00000 0x80000>; + }; + + ac_db_mem: memory@8fc80000 { + no-map; + reg = <0x8fc80000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + sbl_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x100000>; + }; + + aop_image: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + aop_cmd_db: memory@8fe20000 { + compatible = "qcom,cmd-db"; + reg = <0x8fe20000 0x20000>; + no-map; + }; + + smem_mem: memory@8fe40000 { + no-map; + reg = <0x8fe40000 0xc0000>; + }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + blsp1_uart3: serial@831000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x00831000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc 30>, + <&gcc 9>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx55-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x00ff4000 0x114>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx55-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6200 0x170>, + <0x00ff6400 0x200>, + <0x00ff6800 0x800>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + mc_virt: interconnect@1100000 { + compatible = "qcom,sdx55-mc-virt"; + reg = <0x01100000 0x400000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx55-mem-noc"; + reg = <0x09680000 0x40000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@162c000 { + compatible = "qcom,sdx55-system-noc"; + reg = <0x0162c000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand-controller@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + + pcie_rc: pcie@1c00000 { + compatible = "qcom,pcie-sdx55"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_PIPE_CLK>, + <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep"; + + assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x0200 0x1>, + <0x100 &apps_smmu 0x0201 0x1>, + <0x200 &apps_smmu 0x0202 0x1>, + <0x300 &apps_smmu 0x0203 0x1>, + <0x400 &apps_smmu 0x0204 0x1>; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", + "doorbell"; + + interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "pcie-mem"; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c07000 { + compatible = "qcom,sdx55-qmp-pcie-phy"; + reg = <0x01c07000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; + + resets = <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie_lane: lanes@1c06000 { + reg = <0x01c06000 0x104>, /* tx0 */ + <0x01c06200 0x328>, /* rx0 */ + <0x01c07200 0x1e8>, /* pcs */ + <0x01c06800 0x104>, /* tx1 */ + <0x01c06a00 0x328>, /* rx1 */ + <0x01c07600 0x800>; /* pcs_misc */ + clocks = <&gcc GCC_PCIE_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_pipe_clk"; + }; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sdx55-ipa"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e50000 0x4b20>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>, + <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fc0000 { + compatible = "qcom,sdx55-tcsr", "syscon"; + reg = <0x01fc0000 0x1000>; + }; + + sdhc_1: mmc@8804000 { + compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX55_CX>, + <&rpmhpd SDX55_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx55-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 51 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b210000 { + compatible = "qcom,sdx55-pdc", "qcom,pdc"; + reg = <0x0b210000 0x30000>; + qcom,pdc-ranges = <0 179 52>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x0000d00>, + <0x0c600000 0x2000000>, + <0x0e600000 0x0100000>, + <0x0e700000 0x00a0000>, + <0x0c40a000 0x0000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0xf100000 0x300000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 108>; + }; + + sram@1468f000 { + compatible = "qcom,sdx55-imem", "syscon", "simple-mfd"; + reg = <0x1468f000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x1468f000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0x200>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17800000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <3>; + reg = <0x17800000 0x1000>, + <0x17802000 0x1000>; + }; + + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17820000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17820000 0x1000>; + clock-frequency = <19200000>; + + frame@17821000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 0x4>, + <GIC_SPI 6 0x4>; + reg = <0x17821000 0x1000>, + <0x17822000 0x1000>; + }; + + frame@17823000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 0x4>; + reg = <0x17823000 0x1000>; + status = "disabled"; + }; + + frame@17824000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 0x4>; + reg = <0x17824000 0x1000>; + status = "disabled"; + }; + + frame@17825000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 0x4>; + reg = <0x17825000 0x1000>; + status = "disabled"; + }; + + frame@17826000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 0x4>; + reg = <0x17826000 0x1000>; + status = "disabled"; + }; + + frame@17827000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 0x4>; + reg = <0x17827000 0x1000>; + status = "disabled"; + }; + + frame@17828000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 0x4>; + reg = <0x17828000 0x1000>; + status = "disabled"; + }; + + frame@17829000 { + frame-number = <7>; + interrupts = <GIC_SPI 14 0x4>; + reg = <0x17829000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17830000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x17830000 0x10000>, <0x17840000 0x10000>; + reg-names = "drv-0", "drv-1"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <1>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdx55-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdx55-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; |