Adding upstream version 6.8.9.upstream/6.8.9

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

46 files changed, 2366 insertions, 958 deletions

diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 3dfb1c8cef..9cc1e14e6c 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-microsoft-dempsey.dtb \
+	qcom-msm8226-microsoft-makepeace.dtb \
+	qcom-msm8226-microsoft-moneypenny.dtb \
 	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8916-samsung-e5.dtb \
 	qcom-msm8916-samsung-e7.dtb \
 	qcom-msm8916-samsung-grandmax.dtb \
 	qcom-msm8916-samsung-serranove.dtb \
+	qcom-msm8926-htc-memul.dtb \
+	qcom-msm8926-microsoft-superman-lte.dtb \
+	qcom-msm8926-microsoft-tesla.dtb \
+	qcom-msm8926-motorola-peregrine.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 0000000000..22f3c7bac5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8018 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
new file mode 100644
index 0000000000..984b797779
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8058: pmic {
+		compatible = "qcom,pm8058";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8058-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8058_led48: led@48 {
+			compatible = "qcom,pm8058-keypad-led";
+			reg = <0x48>;
+			status = "disabled";
+		};
+
+		vibrator@4a {
+			compatible = "qcom,pm8058-vib";
+			reg = <0x4a>;
+		};
+
+		pm8058_mpps: mpps@50 {
+			compatible = "qcom,pm8058-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8058_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8058_led131: led@131 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x131>;
+			status = "disabled";
+		};
+
+		pm8058_led132: led@132 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x132>;
+			status = "disabled";
+		};
+
+		pm8058_led133: led@133 {
+			compatible = "qcom,pm8058-led";
+			reg = <0x133>;
+			status = "disabled";
+		};
+
+		pm8058_keypad: keypad@148 {
+			compatible = "qcom,pm8058-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8058 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+		};
+
+		pm8058_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8058_gpio 0 0 44>;
+			#gpio-cells = <2>;
+		};
+
+		pm8058_xoadc: xoadc@197 {
+			compatible = "qcom,pm8058-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			ichg: adc-channel@3 {
+				reg = <0x00 0x03>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			ref_325mv: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+
+		rtc@1e8 {
+			compatible = "qcom,pm8058-rtc";
+			reg = <0x1e8>;
+			interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi
index 2413778f37..2fd4f135ed 100644
--- a/arch/arm/boot/dts/qcom/pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8226.dtsi
@@ -82,6 +82,8 @@
 					  "usb-valid",
 					  "dc-valid";
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi
new file mode 100644
index 0000000000..064e3ba54e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8821.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This PMIC is used on a secondary SSBI bus */
+&ssbi2 {
+	pm8821: pmic {
+		compatible = "qcom,pm8821";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8821_mpps: mpps@50 {
+			compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8821_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 0000000000..058962af30
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+	pm8921: pmic {
+		compatible = "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8921_mpps: mpps@50 {
+			compatible = "qcom,pm8921-mpp",
+				     "qcom,ssbi-mpp";
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8921_mpps 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>;
+			allow-set-time;
+		};
+
+		pm8921_keypad: keypad@148 {
+			compatible = "qcom,pm8921-keypad";
+			reg = <0x148>;
+			interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>,
+					      <&pm8921 75 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15>;
+			scan-delay = <32>;
+			row-hold = <91500>;
+			status = "disabled";
+		};
+
+		pm8921_gpio: gpio@150 {
+
+			compatible = "qcom,pm8921-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8921_gpio 0 0 44>;
+			#gpio-cells = <2>;
+
+		};
+
+		pm8921_xoadc: xoadc@197 {
+			compatible = "qcom,pm8921-adc";
+			reg = <0x197>;
+			interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#io-channel-cells = <2>;
+
+			vcoin: adc-channel@0 {
+				reg = <0x00 0x00>;
+			};
+
+			vbat: adc-channel@1 {
+				reg = <0x00 0x01>;
+			};
+
+			dcin: adc-channel@2 {
+				reg = <0x00 0x02>;
+			};
+
+			vph_pwr: adc-channel@4 {
+				reg = <0x00 0x04>;
+			};
+
+			batt_therm: adc-channel@8 {
+				reg = <0x00 0x08>;
+			};
+
+			batt_id: adc-channel@9 {
+				reg = <0x00 0x09>;
+			};
+
+			usb_vbus: adc-channel@a {
+				reg = <0x00 0x0a>;
+			};
+
+			die_temp: adc-channel@b {
+				reg = <0x00 0x0b>;
+			};
+
+			ref_625mv: adc-channel@c {
+				reg = <0x00 0x0c>;
+			};
+
+			ref_1250mv: adc-channel@d {
+				reg = <0x00 0x0d>;
+			};
+
+			chg_temp: adc-channel@e {
+				reg = <0x00 0x0e>;
+			};
+
+			ref_muxoff: adc-channel@f {
+				reg = <0x00 0x0f>;
+			};
+		};
+	};
+};
+
+/ {
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi
index ed0ba591c7..aca0052a02 100644
--- a/arch/arm/boot/dts/qcom/pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8941.dtsi
@@ -99,6 +99,8 @@
 
 			usb-otg-in-supply = <&pm8941_5vs1>;
 
+			status = "disabled";
+
 			chg_otg: otg-vbus { };
 		};
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
index a39f5a161b..a2ca456012 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts
@@ -253,6 +253,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4400000>;
 	qcom,auto-recharge-threshold-voltage = <4300000>;
 	qcom,minimum-input-voltage = <4400000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
index 59b218042d..ac228965a4 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts
@@ -335,6 +335,8 @@
 	qcom,fast-charge-current-limit = <300000>;
 	qcom,fast-charge-safe-current = <600000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index feb78afef3..0a1fd5eb3c 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -292,6 +292,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 94351c9bf9..009afd8212 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm APQ8060 Dragonboard";
@@ -272,6 +273,10 @@
 	};
 };
 
+&pm8058 {
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8058_gpio {
 	dragon_ethernet_gpios: ethernet-state {
 		pinconf {
@@ -447,6 +452,8 @@
 	 * that means
 	 */
 	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+
 		vdd_l0-supply = <&pm8901_s4>;
 		vdd_l1-supply = <&vph>;
 		vdd_l2-supply = <&vph>;
@@ -464,57 +471,63 @@
 		lvs3_in-supply = <&pm8058_s2>;
 		mvs_in-supply = <&pm8058_s3>;
 
-		l0 {
+		pm8901_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8901_l1: l1 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8901_l2: l2 {
 			/* TMA340 requires strictly 3.3V */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8901_l3: l3 {
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8901_l4: l4 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8901_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8901_l6: l6 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
 
 		/* s0 and s1 are SAW regulators controlled over SPM */
-		s2 {
+		pm8901_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+		pm8901_s3: s3 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s4 {
+		pm8901_s4: s4 {
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -522,17 +535,22 @@
 		};
 
 		/* LVS0 thru 3 and mvs are just switches */
-		lvs0 {
+		pm8901_lvs0: lvs0 {
 			regulator-always-on;
 		};
-		lvs1 { };
-		lvs2 { };
-		lvs3 { };
-		mvs { };
 
+		pm8901_lvs1: lvs1 { };
+
+		pm8901_lvs2: lvs2 { };
+
+		pm8901_lvs3: lvs3 { };
+
+		pm8901_mvs: mvs { };
 	};
 
 	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
+
 		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
 		vdd_l2_l11_l12-supply = <&vph>;
 		vdd_l3_l4_l5-supply = <&vph>;
@@ -554,144 +572,169 @@
 		vdd_s4-supply = <&vph>;
 		vdd_ncp-supply = <&vph>;
 
-		l0 {
+		pm8058_l0: l0 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l1 {
+
+		pm8058_l1: l1 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l2 {
+
+		pm8058_l2: l2 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l3 {
+
+		pm8058_l3: l3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l4 {
+
+		pm8058_l4: l4 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l5 {
+
+		pm8058_l5: l5 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l6 {
+
+		pm8058_l6: l6 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3600000>;
 			bias-pull-down;
 		};
-		l7 {
+
+		pm8058_l7: l7 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l8 {
+
+		pm8058_l8: l8 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <3050000>;
 			bias-pull-down;
 		};
-		l9 {
+
+		pm8058_l9: l9 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l10 {
+
+		pm8058_l10: l10 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l11 {
+
+		pm8058_l11: l11 {
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			bias-pull-down;
 		};
-		l12 {
+
+		pm8058_l12: l12 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
-		l13 {
+
+		pm8058_l13: l13 {
 			regulator-min-microvolt = <2050000>;
 			regulator-max-microvolt = <2050000>;
 			bias-pull-down;
 		};
-		l14 {
+
+		pm8058_l14: l14 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-		l15 {
+
+		pm8058_l15: l15 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 			bias-pull-down;
 		};
-		l16 {
+
+		pm8058_l16: l16 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l17 {
+
+		pm8058_l17: l17 {
 			// 1.5V according to schematic
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
-		l18 {
+
+		pm8058_l18: l18 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			bias-pull-down;
 		};
-		l19 {
+
+		pm8058_l19: l19 {
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			bias-pull-down;
 		};
-		l20 {
+
+		pm8058_l20: l20 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
-		l21 {
+
+		pm8058_l21: l21 {
 			// 1.1 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 			regulator-always-on;
 		};
-		l22 {
+
+		pm8058_l22: l22 {
 			// 1.2 V according to schematic
 			regulator-min-microvolt = <1150000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
-		l23 {
+
+		pm8058_l23: l23 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l24 {
+
+		pm8058_l24: l24 {
 			// Unused
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
-		l25 {
+
+		pm8058_l25: l25 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		s0 {
+		pm8058_s0: s0 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1325000>;
 			regulator-min-microvolt = <1100000>;
@@ -699,7 +742,8 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s1 {
+
+		pm8058_s1: s1 {
 			// regulator-min-microvolt = <500000>;
 			// regulator-max-microvolt = <1250000>;
 			regulator-min-microvolt = <1100000>;
@@ -707,21 +751,24 @@
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s2 {
+
+		pm8058_s2: s2 {
 			// 1.3 V according to schematic
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
-		s3 {
+
+		pm8058_s3: s3 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
-		s4 {
+
+		pm8058_s4: s4 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -730,14 +777,15 @@
 		};
 
 		/* LVS0 and LVS1 are just switches */
-		lvs0 {
+		pm8058_lvs0: lvs0 {
 			bias-pull-down;
 		};
-		lvs1 {
+
+		pm8058_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		ncp {
+		pm8058_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
@@ -949,23 +997,27 @@
 	xoadc-ref-supply = <&pm8058_l18>;
 
 	/* Board-specific channels */
-	mpp5@5 {
+	adc-channel@5 {
 		/* Connected to AOUT of ALS sensor */
 		reg = <0x00 0x05>;
 	};
-	mpp6@6 {
+
+	adc-channel@6 {
 		/* Connected to test point TP43 */
 		reg = <0x00 0x06>;
 	};
-	mpp7@7 {
+
+	adc-channel@7 {
 		/* Connected to battery thermistor */
 		reg = <0x00 0x07>;
 	};
-	mpp8@8 {
+
+	adc-channel@8 {
 		/* Connected to battery ID detector */
 		reg = <0x00 0x08>;
 	};
-	mpp9@9 {
+
+	adc-channel@9 {
 		/* Connected to XO thermistor */
 		reg = <0x00 0x09>;
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
index c0dd6399f5..d460743fbb 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts
@@ -1,8 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
@@ -180,24 +184,26 @@
 	status = "okay";
 };
 
-/* eMMC */
-&sdcc1 {
-	vmmc-supply = <&pm8921_l5>;
-	vqmmc-supply = <&pm8921_s4>;
-	status = "okay";
-};
-
 &mdp_dsi1_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
 
-
 		vdd_l24-supply = <&pm8921_s1>;
 		vdd_l25-supply = <&pm8921_s1>;
 		vin_lvs2-supply = <&pm8921_s1>;
@@ -209,7 +215,7 @@
 		vdd_ncp-supply = <&pm8921_l6>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -218,7 +224,7 @@
 		};
 
 		/* msm otg HSUSB_VDDCX */
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
@@ -231,55 +237,58 @@
 		 * tabla2x-slim-CDC_VDD_CP
 		 * tabla2x-slim-VDDIO_CDC
 		 */
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 			regulator-always-on;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
 		/* mipi_dsi.1-dsi1_pll_vdda */
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			regulator-always-on;
 		};
 
 		/* msm_otg-HSUSB_3p3 */
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
 		/* msm_otg-HSUSB_1p8 */
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
 		/* msm_sdcc.1-sdc_vdd */
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			regulator-always-on;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 		};
 
+		pm8921_l8: l8 {
+		};
+
 		/* mipi_dsi.1-dsi1_avdd */
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
@@ -287,14 +296,14 @@
 		};
 
 		/* pwm_power for backlight */
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			regulator-always-on;
 		};
 
 		/* camera, qdsp6 */
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
@@ -304,37 +313,44 @@
 		 * tabla2x-slim-CDC_VDDA_A_1P2V
 		 * tabla2x-slim-VDDD_CDC_D
 		 */
-		l25 {
+		pm8921_l25: l25 {
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 		/*
 		 * mipi_dsi.1-dsi1_vddio
 		 * pil_riva-pll_vdd
 		 */
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 	};
 };
 
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
 &usb_hs1_phy {
 	v3p3-supply = <&pm8921_l3>;
 	v1p8-supply = <&pm8921_l4>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
index d6ecfd8add..671d58cc27 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts
@@ -1,8 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "CompuLab CM-QS600";
 	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
@@ -69,6 +72,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -82,6 +93,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -93,9 +106,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -103,52 +115,51 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
-
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
index b0c5e7bd5e..ed86b24119 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts
@@ -1,9 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Qualcomm APQ8064/IFC6410";
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
@@ -170,6 +173,14 @@
 	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	wlan_default_gpios: wlan-gpios-state {
 		pinconf {
@@ -192,6 +203,8 @@
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_lvs1_3_6-supply = <&pm8921_s4>;
 		vin_lvs2-supply = <&pm8921_s1>;
 		vin_lvs4_5_7-supply = <&pm8921_s4>;
@@ -203,9 +216,8 @@
 		vdd_l27-supply = <&pm8921_s7>;
 		vdd_l28-supply = <&pm8921_s7>;
 
-
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -213,59 +225,63 @@
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1400000>;
 			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2750000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1700000>;
 			regulator-max-microvolt = <1900000>;
 			bias-pull-down;
 		};
 
-		lvs1 {
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_hdmi_switch: hdmi-switch {
 			bias-pull-down;
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 9244512b74..2412aa3e3e 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+#include "qcom-apq8064-v2.0.dtsi"
+#include "pm8821.dtsi"
+#include "pm8921.dtsi"
+
 / {
 	model = "Sony Xperia Z";
 	compatible = "sony,xperia-yuga", "qcom,apq8064";
@@ -65,6 +68,14 @@
 	status = "okay";
 };
 
+&pm8821 {
+	interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921 {
+	interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &pm8921_gpio {
 	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio3", "gpio4", "gpio29", "gpio35";
@@ -82,11 +93,25 @@
 &riva {
 	pinctrl-names = "default";
 	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+
+	vddcx-supply = <&pm8921_s3>;
+	vddmx-supply = <&pm8921_l24>;
+	vddpx-supply = <&pm8921_s4>;
+
 	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8921_l4>;
+		vddrfa-supply = <&pm8921_s2>;
+		vddpa-supply = <&pm8921_l10>;
+		vdddig-supply = <&pm8921_lvs2>;
+	};
 };
 
 &rpm {
 	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+
 		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
 		vin_lvs_1_3_6-supply = <&pm8921_s4>;
 		vin_lvs_4_5_7-supply = <&pm8921_s4>;
@@ -98,7 +123,7 @@
 		vin_l28-supply = <&pm8921_s7>;
 
 		/* Buck SMPS */
-		s1 {
+		pm8921_s1: s1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1225000>;
 			regulator-max-microvolt = <1225000>;
@@ -106,21 +131,21 @@
 			bias-pull-down;
 		};
 
-		s2 {
+		pm8921_s2: s2 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 		};
 
-		s3 {
+		pm8921_s3: s3 {
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1150000>;
 			qcom,switch-mode-frequency = <4800000>;
 			bias-pull-down;
 		};
 
-		s4 {
+		pm8921_s4: s4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -129,205 +154,207 @@
 			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
 		};
 
-		s7 {
+		pm8921_s7: s7 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1300000>;
 			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		s8 {
+		pm8921_s8: s8 {
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
 			qcom,switch-mode-frequency = <1600000>;
 		};
 
 		/* PMOS LDO */
-		l1 {
+		pm8921_l1: l1 {
 			regulator-always-on;
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 			bias-pull-down;
 		};
 
-		l2 {
+		pm8921_l2: l2 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l3 {
+		pm8921_l3: l3 {
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 			bias-pull-down;
 		};
 
-		l4 {
+		pm8921_l4: l4 {
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l5 {
+		pm8921_l5: l5 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l6 {
+		pm8921_l6: l6 {
 			regulator-min-microvolt = <2950000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l7 {
+		pm8921_l7: l7 {
 			regulator-min-microvolt = <1850000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l8 {
+		pm8921_l8: l8 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l9 {
+		pm8921_l9: l9 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l10 {
+		pm8921_l10: l10 {
 			regulator-min-microvolt = <2900000>;
 			regulator-max-microvolt = <2900000>;
 			bias-pull-down;
 		};
 
-		l11 {
+		pm8921_l11: l11 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 			bias-pull-down;
 		};
 
-		l12 {
+		pm8921_l12: l12 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l14 {
+		pm8921_l14: l14 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l15 {
+		pm8921_l15: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2950000>;
 			bias-pull-down;
 		};
 
-		l16 {
+		pm8921_l16: l16 {
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			bias-pull-down;
 		};
 
-		l17 {
+		pm8921_l17: l17 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
-		l18 {
+		pm8921_l18: l18 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
 			bias-pull-down;
 		};
 
-		l21 {
+		pm8921_l21: l21 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l22 {
+		pm8921_l22: l22 {
 			regulator-min-microvolt = <2600000>;
 			regulator-max-microvolt = <2600000>;
 			bias-pull-down;
 		};
 
-		l23 {
+		pm8921_l23: l23 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			bias-pull-down;
 		};
 
-		l24 {
+		pm8921_l24: l24 {
 			regulator-min-microvolt = <750000>;
 			regulator-max-microvolt = <1150000>;
 			bias-pull-down;
 		};
 
-		l25 {
+		pm8921_l25: l25 {
 			regulator-always-on;
 			regulator-min-microvolt = <1250000>;
 			regulator-max-microvolt = <1250000>;
 			bias-pull-down;
 		};
 
-		l27 {
+		pm8921_l27: l27 {
 			regulator-min-microvolt = <1100000>;
 			regulator-max-microvolt = <1100000>;
 		};
 
-		l28 {
+		pm8921_l28: l28 {
 			regulator-min-microvolt = <1050000>;
 			regulator-max-microvolt = <1050000>;
 			bias-pull-down;
 		};
 
-		l29 {
+		pm8921_l29: l29 {
 			regulator-min-microvolt = <2000000>;
 			regulator-max-microvolt = <2000000>;
 			bias-pull-down;
 		};
 
 		/* Low Voltage Switch */
-		lvs1 {
+		pm8921_lvs1: lvs1 {
 			bias-pull-down;
 		};
 
-		lvs2 {
+		pm8921_lvs2: lvs2 {
 			bias-pull-down;
 		};
 
-		lvs3 {
+		pm8921_lvs3: lvs3 {
 			bias-pull-down;
 		};
 
-		lvs4 {
+		pm8921_lvs4: lvs4 {
 			bias-pull-down;
 		};
 
-		lvs5 {
+		pm8921_lvs5: lvs5 {
 			bias-pull-down;
 		};
 
-		lvs6 {
+		pm8921_lvs6: lvs6 {
 			bias-pull-down;
 		};
 
-		lvs7 {
+		pm8921_lvs7: lvs7 {
 			bias-pull-down;
 		};
 
-		usb-switch {};
+		pm8921_usb_switch: usb-switch {};
 
-		hdmi-switch {};
+		pm8921_hdmi_switch: hdmi-switch {
+			bias-pull-down;
+		};
 
-		ncp {
+		pm8921_ncp: ncp {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 099a16c34e..3faf57035d 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -284,23 +284,6 @@
 		};
 	};
 
-
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Charger temperature */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -655,133 +638,16 @@
 			clock-names = "core";
 		};
 
-		ssbi@c00000 {
+		ssbi2: ssbi@c00000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8821: pmic {
-				compatible = "qcom,pm8821";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8821_mpps: mpps@50 {
-					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
-					reg = <0x50>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8821_mpps 0 0 4>;
-				};
-			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&tlmm_pinmux>;
-				interrupts = <74 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8921_gpio: gpio@150 {
-
-					compatible = "qcom,pm8921-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8921_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8921_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				xoadc: xoadc@197 {
-					compatible = "qcom,pm8921-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					batt_therm: adc-channel@8 {
-						reg = <0x00 0x08>;
-					};
-					batt_id: adc-channel@9 {
-						reg = <0x00 0x09>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					chg_temp: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-			};
 		};
 
 		qfprom: qfprom@700000 {
@@ -891,60 +757,6 @@
 				clocks = <&pxo_board>, <&cxo_board>;
 				clock-names = "pxo", "cxo";
 			};
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-
-				pm8921_s1: s1 {};
-				pm8921_s2: s2 {};
-				pm8921_s3: s3 {};
-				pm8921_s4: s4 {};
-				pm8921_s7: s7 {};
-				pm8921_s8: s8 {};
-
-				pm8921_l1: l1 {};
-				pm8921_l2: l2 {};
-				pm8921_l3: l3 {};
-				pm8921_l4: l4 {};
-				pm8921_l5: l5 {};
-				pm8921_l6: l6 {};
-				pm8921_l7: l7 {};
-				pm8921_l8: l8 {};
-				pm8921_l9: l9 {};
-				pm8921_l10: l10 {};
-				pm8921_l11: l11 {};
-				pm8921_l12: l12 {};
-				pm8921_l14: l14 {};
-				pm8921_l15: l15 {};
-				pm8921_l16: l16 {};
-				pm8921_l17: l17 {};
-				pm8921_l18: l18 {};
-				pm8921_l21: l21 {};
-				pm8921_l22: l22 {};
-				pm8921_l23: l23 {};
-				pm8921_l24: l24 {};
-				pm8921_l25: l25 {};
-				pm8921_l26: l26 {};
-				pm8921_l27: l27 {};
-				pm8921_l28: l28 {};
-				pm8921_l29: l29 {};
-
-				pm8921_lvs1: lvs1 {};
-				pm8921_lvs2: lvs2 {};
-				pm8921_lvs3: lvs3 {};
-				pm8921_lvs4: lvs4 {};
-				pm8921_lvs5: lvs5 {};
-				pm8921_lvs6: lvs6 {};
-				pm8921_lvs7: lvs7 {};
-
-				pm8921_usb_switch: usb-switch {};
-
-				pm8921_hdmi_switch: hdmi-switch {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {};
-			};
 		};
 
 		usb1: usb@12500000 {
@@ -1472,7 +1284,7 @@
 			qcom,ncb = <3>;
 		};
 
-		pcie: pci@1b500000 {
+		pcie: pcie@1b500000 {
 			compatible = "qcom,pcie-apq8064";
 			reg = <0x1b500000 0x1000>,
 			      <0x1b502000 0x80>,
@@ -1623,10 +1435,6 @@
 
 			memory-region = <&wcnss_mem>;
 
-			vddcx-supply = <&pm8921_s3>;
-			vddmx-supply = <&pm8921_l24>;
-			vddpx-supply = <&pm8921_s4>;
-
 			status = "disabled";
 
 			iris {
@@ -1634,11 +1442,6 @@
 
 				clocks = <&cxo_board>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8921_l4>;
-				vddrfa-supply = <&pm8921_s2>;
-				vddpa-supply = <&pm8921_l10>;
-				vdddig-supply = <&pm8921_lvs2>;
 			};
 
 			smd-edge {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
index 950fa652f9..6fce011236 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts
@@ -49,6 +49,33 @@
 			no-map;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_uart2 {
@@ -403,6 +430,10 @@
 	pinctrl-1 = <&sdc2_off>;
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	sdc1_on: sdc1-on-state {
 		clk-pins {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
index 468ebc40d2..374af6dd36 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
 			};
 		};
 
-		pci@40000000 {
+		pcie@40000000 {
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 9844e0b7cf..f989bd741c 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -224,7 +224,7 @@
 		};
 
 		sdhci: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,7 +417,7 @@
 			reg = <0x4ab000 0x4>;
 		};
 
-		pcie0: pci@40000000 {
+		pcie0: pcie@40000000 {
 			compatible = "qcom,pcie-ipq4019";
 			reg = <0x40000000 0xf1d>,
 			      <0x40000f20 0xa8>,
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6198f42f6a..6a7f4dd0f7 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -366,7 +366,7 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
@@ -1076,7 +1076,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@1b500000 {
+		pcie0: pcie@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
 			       0x1b502000 0x80
@@ -1127,7 +1127,7 @@
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie1: pci@1b700000 {
+		pcie1: pcie@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
 			       0x1b702000 0x80
@@ -1178,7 +1178,7 @@
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
-		pcie2: pci@1b900000 {
+		pcie2: pcie@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
 			       0x1b902000 0x80
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
index b269fdca14..e3b4b93c3d 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -6,11 +6,11 @@
  * Author : Neil Armstrong <narmstrong@baylibre.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 #include "qcom-mdm9615-wp8548.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "MangOH Green with WP8548 Module";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f..0dd52cac0e 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
@@ -76,6 +77,10 @@
 	};
 };
 
+&pm8018 {
+	interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pm8018_gpio {
 	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
@@ -129,6 +134,142 @@
 	pinctrl-names = "default";
 };
 
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8018-regulators";
+
+		vin_lvs1-supply = <&pm8018_s3>;
+
+		vdd_l7-supply = <&pm8018_s4>;
+		vdd_l8-supply = <&pm8018_s3>;
+		vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
+
+		/* Buck SMPS */
+		pm8018_s1: s1 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s2: s2 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s3: s3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s4: s4 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8018_s5: s5 {
+			regulator-always-on;
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8018_l2: l2 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l3: l3 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8018_l4: l4 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+
+		pm8018_l5: l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8018_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8018_l8: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8018_l9: l9 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8018_l10: l10 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l11: l11 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8018_l13: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8018_l14: l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8018_lvs1: lvs1 {
+			bias-pull-down;
+		};
+	};
+};
+
 &sdcc1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c0a60bae70..34c60994d0 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -256,57 +256,10 @@
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8018: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
-				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8018>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8018_mpps: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8018_mpps 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pm8018>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pm8018_gpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8018_gpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
-			};
 		};
 
 		sdcc1bam: dma-controller@12182000 {
@@ -383,140 +336,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8018-regulators";
-
-				vin_lvs1-supply = <&pm8018_s3>;
-
-				vdd_l7-supply = <&pm8018_s4>;
-				vdd_l8-supply = <&pm8018_s3>;
-				vdd_l9_l10_l11_l12-supply = <&pm8018_s5>;
-
-				/* Buck SMPS */
-				pm8018_s1: s1 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s2: s2 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s3: s3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s4: s4 {
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8018_s5: s5 {
-					regulator-always-on;
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8018_l2: l2 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l3: l3 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8018_l4: l4 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				pm8018_l5: l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l6: l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8018_l7: l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8018_l8: l8 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8018_l9: l9 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8018_l10: l10 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l11: l11 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l12: l12 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8018_l13: l13 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8018_l14: l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8018_lvs1: lvs1 {
-					bias-pull-down;
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
new file mode 100644
index 0000000000..525d8c608b
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for Microsoft MSM8x26-based Lumias
+ *
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+#include <dt-bindings/input/input.h>
+
+/*
+ * Delete all generic (msm8226.dtsi) reserved
+ * memory mappings which are different on these devices.
+ */
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* microSD */
+		display0 = &framebuffer;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x3200000 0x800000>;
+			format = "a8r8g8b8";
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 4)>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	/*
+	 * This device being a WP platform has a different
+	 * memory layout than other Android based devices.
+	 * This smem memory region is directly copied from
+	 * the original UEFI firmware.
+	 */
+	reserved-memory {
+		display_reserved: framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		/* These values were taken from the original firmware DSDT */
+		pm8226_s1: s1 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2075000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio106", "gpio107", "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
new file mode 100644
index 0000000000..2c664b5934
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640";
+	compatible = "microsoft,dempsey", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
new file mode 100644
index 0000000000..731c5c3756
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Microsoft Lumia 640 XL";
+	compatible = "microsoft,makepeace", "qcom,msm8226";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
new file mode 100644
index 0000000000..992b7115b5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/ {
+	model = "Nokia Lumia 630";
+	compatible = "microsoft,moneypenny", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <480>;
+	height = <854>;
+	stride = <(480 * 4)>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 5cd03ea7b0..b492c95e5d 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -875,8 +875,8 @@
 				offset = <0x65c>;
 
 				mode-bootloader = <0x77665500>;
-				mode-normal     = <0x77665501>;
-				mode-recovery   = <0x77665502>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
 			};
 		};
 
@@ -1006,6 +1006,46 @@
 					      "ref";
 			};
 		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-305.18", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-19000000 {
+					opp-hz = /bits/ 64 <19000000>;
+				};
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
index be18f1be29..69fe651f56 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8660.dtsi"
+#include "pm8058.dtsi"
 
 / {
 	model = "Qualcomm MSM8660 SURF";
@@ -35,30 +36,42 @@
 };
 
 &pm8058 {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_FN_F1)
-			MATRIX_KEY(0, 1, KEY_UP)
-			MATRIX_KEY(0, 2, KEY_LEFT)
-			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
-			MATRIX_KEY(1, 0, KEY_FN_F2)
-			MATRIX_KEY(1, 1, KEY_RIGHT)
-			MATRIX_KEY(1, 2, KEY_DOWN)
-			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
-			MATRIX_KEY(2, 3, KEY_ENTER)
-			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(4, 1, KEY_UP)
-			MATRIX_KEY(4, 2, KEY_LEFT)
-			MATRIX_KEY(4, 3, KEY_HOME)
-			MATRIX_KEY(4, 4, KEY_FN_F3)
-			MATRIX_KEY(5, 0, KEY_CAMERA)
-			MATRIX_KEY(5, 1, KEY_RIGHT)
-			MATRIX_KEY(5, 2, KEY_DOWN)
-			MATRIX_KEY(5, 3, KEY_BACK)
-			MATRIX_KEY(5, 4, KEY_MENU)
-			>;
-		keypad,num-rows = <6>;
-		keypad,num-columns = <5>;
+	interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_FN_F1)
+		MATRIX_KEY(0, 1, KEY_UP)
+		MATRIX_KEY(0, 2, KEY_LEFT)
+		MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+		MATRIX_KEY(1, 0, KEY_FN_F2)
+		MATRIX_KEY(1, 1, KEY_RIGHT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+		MATRIX_KEY(2, 3, KEY_ENTER)
+		MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(4, 1, KEY_UP)
+		MATRIX_KEY(4, 2, KEY_LEFT)
+		MATRIX_KEY(4, 3, KEY_HOME)
+		MATRIX_KEY(4, 4, KEY_FN_F3)
+		MATRIX_KEY(5, 0, KEY_CAMERA)
+		MATRIX_KEY(5, 1, KEY_RIGHT)
+		MATRIX_KEY(5, 2, KEY_DOWN)
+		MATRIX_KEY(5, 3, KEY_BACK)
+		MATRIX_KEY(5, 4, KEY_MENU)
+		>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
+
+&rpm {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8901-regulators";
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8058-regulators";
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 9217ced108..a7c245b9c8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -73,22 +73,6 @@
 		};
 	};
 
-	/*
-	 * These channels from the ADC are simply hardware monitors.
-	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
-	 * ADC.
-	 */
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
-			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
-			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
-			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
-			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
-	};
-
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -334,143 +318,10 @@
 			status = "disabled";
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pm8058: pmic {
-				compatible = "qcom,pm8058";
-				interrupt-parent = <&tlmm>;
-				interrupts = <88 8>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pm8058_gpio: gpio@150 {
-					compatible = "qcom,pm8058-gpio",
-						     "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8058_gpio 0 0 44>;
-					#gpio-cells = <2>;
-
-				};
-
-				pm8058_mpps: mpps@50 {
-					compatible = "qcom,pm8058-mpp",
-						     "qcom,ssbi-mpp";
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8058_mpps 0 0 12>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				pwrkey@1c {
-					compatible = "qcom,pm8058-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <50 1>, <51 1>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8058_keypad: keypad@148 {
-					compatible = "qcom,pm8058-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <74 1>, <75 1>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				pm8058_xoadc: xoadc@197 {
-					compatible = "qcom,pm8058-adc";
-					reg = <0x197>;
-					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-					#address-cells = <2>;
-					#size-cells = <0>;
-					#io-channel-cells = <2>;
-
-					vcoin: adc-channel@0 {
-						reg = <0x00 0x00>;
-					};
-					vbat: adc-channel@1 {
-						reg = <0x00 0x01>;
-					};
-					dcin: adc-channel@2 {
-						reg = <0x00 0x02>;
-					};
-					ichg: adc-channel@3 {
-						reg = <0x00 0x03>;
-					};
-					vph_pwr: adc-channel@4 {
-						reg = <0x00 0x04>;
-					};
-					usb_vbus: adc-channel@a {
-						reg = <0x00 0x0a>;
-					};
-					die_temp: adc-channel@b {
-						reg = <0x00 0x0b>;
-					};
-					ref_625mv: adc-channel@c {
-						reg = <0x00 0x0c>;
-					};
-					ref_1250mv: adc-channel@d {
-						reg = <0x00 0x0d>;
-					};
-					ref_325mv: adc-channel@e {
-						reg = <0x00 0x0e>;
-					};
-					ref_muxoff: adc-channel@f {
-						reg = <0x00 0x0f>;
-					};
-				};
-
-				rtc@1e8 {
-					compatible = "qcom,pm8058-rtc";
-					reg = <0x1e8>;
-					interrupt-parent = <&pm8058>;
-					interrupts = <39 1>;
-					allow-set-time;
-				};
-
-				vibrator@4a {
-					compatible = "qcom,pm8058-vib";
-					reg = <0x4a>;
-				};
-
-				pm8058_led48: led@48 {
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					status = "disabled";
-				};
-
-				pm8058_led131: led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					status = "disabled";
-				};
-
-				pm8058_led132: led@132 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					status = "disabled";
-				};
-
-				pm8058_led133: led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					status = "disabled";
-				};
-
-			};
 		};
 
 		l2cc: clock-controller@2082000 {
@@ -496,72 +347,6 @@
 				clocks = <&pxo_board>;
 				clock-names = "pxo";
 			};
-
-			regulators-0 {
-				compatible = "qcom,rpm-pm8901-regulators";
-
-				pm8901_l0: l0 {};
-				pm8901_l1: l1 {};
-				pm8901_l2: l2 {};
-				pm8901_l3: l3 {};
-				pm8901_l4: l4 {};
-				pm8901_l5: l5 {};
-				pm8901_l6: l6 {};
-
-				/* S0 and S1 Handled as SAW regulators by SPM */
-				pm8901_s2: s2 {};
-				pm8901_s3: s3 {};
-				pm8901_s4: s4 {};
-
-				pm8901_lvs0: lvs0 {};
-				pm8901_lvs1: lvs1 {};
-				pm8901_lvs2: lvs2 {};
-				pm8901_lvs3: lvs3 {};
-
-				pm8901_mvs: mvs {};
-			};
-
-			regulators-1 {
-				compatible = "qcom,rpm-pm8058-regulators";
-
-				pm8058_l0: l0 {};
-				pm8058_l1: l1 {};
-				pm8058_l2: l2 {};
-				pm8058_l3: l3 {};
-				pm8058_l4: l4 {};
-				pm8058_l5: l5 {};
-				pm8058_l6: l6 {};
-				pm8058_l7: l7 {};
-				pm8058_l8: l8 {};
-				pm8058_l9: l9 {};
-				pm8058_l10: l10 {};
-				pm8058_l11: l11 {};
-				pm8058_l12: l12 {};
-				pm8058_l13: l13 {};
-				pm8058_l14: l14 {};
-				pm8058_l15: l15 {};
-				pm8058_l16: l16 {};
-				pm8058_l17: l17 {};
-				pm8058_l18: l18 {};
-				pm8058_l19: l19 {};
-				pm8058_l20: l20 {};
-				pm8058_l21: l21 {};
-				pm8058_l22: l22 {};
-				pm8058_l23: l23 {};
-				pm8058_l24: l24 {};
-				pm8058_l25: l25 {};
-
-				pm8058_s0: s0 {};
-				pm8058_s1: s1 {};
-				pm8058_s2: s2 {};
-				pm8058_s3: s3 {};
-				pm8058_s4: s4 {};
-
-				pm8058_lvs0: lvs0 {};
-				pm8058_lvs1: lvs1 {};
-
-				pm8058_ncp: ncp {};
-			};
 		};
 
 		amba {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 0000000000..ed328b2433
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "HTC One Mini 2";
+	compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		unknown@5b00000 {
+			reg = <0x05b00000 0x200000>;
+			no-map;
+		};
+
+		unknown@7500000 {
+			reg = <0x07500000 0xb00000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x4f00000>;
+			no-map;
+		};
+
+		unknown@cf00000 {
+			reg = <0x0cf00000 0x200000>;
+			no-map;
+		};
+
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x3a000>;
+			no-map;
+		};
+
+		unknown@d13a000 {
+			reg = <0x0d13a000 0xc6000>;
+			no-map;
+		};
+
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0x650000>;
+			no-map;
+		};
+
+		unknown@d850000 {
+			reg = <0x0d850000 0x3b0000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1400000>;
+			no-map;
+		};
+
+		unknown@f000000 {
+			reg = <0x0f000000 0x500000>;
+			no-map;
+		};
+
+		venus_region: venus@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		unknown@fb00000 {
+			reg = <0x0fb00000 0x1b00000>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/msm8926/memul/adsp.mbn";
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vid-supply = <&pm8226_l28>;
+	};
+
+	accelerometer@18 {
+		compatible = "bosch,bma250e";
+		reg = <0x18>;
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_l28>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* TFA9887 @ 34 */
+	/* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/* NCP6924 Camera Regulators @ 10 */
+	/* PN544 NFC @ 28 */
+	/* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1750000>;
+	qcom,fast-charge-current-limit = <1750000>;
+	qcom,fast-charge-safe-voltage = <4360000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
new file mode 100644
index 0000000000..9b48661d69
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c3 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 735";
+	compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
new file mode 100644
index 0000000000..53a6d4e859
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com>
+ * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
+ * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com>
+ * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-microsoft-common.dtsi"
+
+/* This device has touchscreen on i2c1 instead */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Nokia Lumia 830";
+	compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	touchscreen: touchscreen@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l6>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5 {
+	status = "disabled";
+};
+
+&gpio_keys {
+	key-camera-snapshot {
+		label = "Camera Snapshot";
+		gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key-camera-focus {
+		label = "Camera Focus";
+		gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
new file mode 100644
index 0000000000..0cbe2d2fbb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G 4G (2013)";
+	compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			/* Pull-up for I2C lines */
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 6c1bc38188..36f4c997b0 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
 #include <dt-bindings/input/input.h>
 
 #include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
 
 / {
 	model = "Qualcomm MSM8960 CDP";
@@ -88,17 +89,21 @@
 	};
 };
 
-&pmicintc {
-	keypad@148 {
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-	};
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(0, 3, KEY_CAMERA)
+		>;
+	keypad,num-rows = <1>;
+	keypad,num-columns = <5>;
+
+	status = "okay";
 };
 
 &rpm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c2874..1a5116336f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
 
 #include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -84,6 +85,10 @@
 	};
 };
 
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
 &rpm {
 	regulators {
 		compatible = "qcom,rpm-pm8921-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index d13080fcbe..f420740e06 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -200,10 +200,6 @@
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ack", "err", "wakeup";
-
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-			};
 		};
 
 		acc0: clock-controller@2088000 {
@@ -259,49 +255,10 @@
 			};
 		};
 
-		ssbi@500000 {
+		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
-
-			pmicintc: pmic {
-				compatible = "qcom,pm8921";
-				interrupt-parent = <&msmgpio>;
-				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				keypad@148 {
-					compatible = "qcom,pm8921-keypad";
-					reg = <0x148>;
-					interrupt-parent = <&pmicintc>;
-					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
-						     <75 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15>;
-					scan-delay = <32>;
-					row-hold = <91500>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8921-rtc";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-			};
 		};
 
 		rng@1a500000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index da99f770d4..4aaae8537a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -60,6 +60,33 @@
 		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -340,6 +367,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -347,6 +375,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
index 23ae474698..d34659ebac 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -65,6 +65,33 @@
 			pmsg-size = <0x80000>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -190,6 +217,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -197,6 +225,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -425,6 +454,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index f41cc4b4b5..083ab780ab 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -346,6 +346,20 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-controller@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -405,52 +419,46 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw1: power-controller@f9099000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw2: power-controller@f90a9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw3: power-controller@f90b9000 {
-			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
-		};
-
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
 		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw0: power-controller@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw1: power-controller@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw2: power-controller@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
+		saw3: power-controller@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -1063,6 +1071,15 @@
 			};
 		};
 
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
@@ -1101,22 +1118,13 @@
 			};
 		};
 
-		bimc: interconnect@fc380000 {
-			reg = <0xfc380000 0x6a000>;
-			compatible = "qcom,msm8974-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
 		snoc: interconnect@fc460000 {
 			reg = <0xfc460000 0x4000>;
 			compatible = "qcom,msm8974-snoc";
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		pnoc: interconnect@fc468000 {
@@ -1125,7 +1133,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		ocmemnoc: interconnect@fc470000 {
@@ -1134,7 +1142,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+				 <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
 		};
 
 		mmssnoc: interconnect@fc478000 {
@@ -1143,7 +1151,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&mmcc MMSS_S0_AXI_CLK>,
-			         <&mmcc MMSS_S0_AXI_CLK>;
+				 <&mmcc MMSS_S0_AXI_CLK>;
 		};
 
 		cnoc: interconnect@fc480000 {
@@ -1152,7 +1160,7 @@
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a";
 			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@fc4a9000 {
@@ -1633,13 +1641,6 @@
 					bias-pull-up;
 					drive-strength = <2>;
 				};
-
-				cd-pins {
-					pins = "gpio54";
-					function = "gpio";
-					bias-disable;
-					drive-strength = <2>;
-				};
 			};
 
 			blsp1_uart2_default: blsp1-uart2-default-state {
@@ -2408,31 +2409,4 @@
 			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
index 6c4153689b..fe227fd3f9 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
@@ -57,6 +57,33 @@
 		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&pm8941_l18>;
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -381,6 +408,8 @@
 	qcom,fast-charge-high-threshold-voltage = <4350000>;
 	qcom,auto-recharge-threshold-voltage = <4240000>;
 	qcom,minimum-input-voltage = <4450000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
index c0ca264d81..4c8edadea0 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
@@ -51,6 +51,33 @@
 			debounce-interval = <150>;
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c1 {
@@ -433,6 +460,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &tlmm {
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio68";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index 325feb89b3..b93539e2b8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -155,7 +155,15 @@
 		enable-active-high;
 	};
 
-	/delete-node/ vreg-boost;
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
 &blsp1_i2c2 {
@@ -355,7 +363,6 @@
 		vddr-supply = <&vreg_panel>;
 
 		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 0798cce3db..ee94741a26 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -84,6 +84,33 @@
 		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
 	};
 
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -297,6 +324,7 @@
 
 &remoteproc_adsp {
 	cx-supply = <&pm8841_s2>;
+	status = "okay";
 };
 
 &remoteproc_mss {
@@ -304,6 +332,7 @@
 	mss-supply = <&pm8841_s3>;
 	mx-supply = <&pm8841_s1>;
 	pll-supply = <&pm8941_l12>;
+	status = "okay";
 };
 
 &rpm_requests {
@@ -558,6 +587,8 @@
 	qcom,fast-charge-low-threshold-voltage = <3400000>;
 	qcom,auto-recharge-threshold-voltage = <4200000>;
 	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index fb6764b2dc..27429d0fed 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -228,31 +228,26 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
-
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6200 0x170>,
-				      <0x00ff6400 0x200>,
-				      <0x00ff6800 0x800>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		mc_virt: interconnect@1100000 {
@@ -603,7 +598,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 27b7f50a18..40591a4da6 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -204,8 +204,16 @@
 		gcc: clock-controller@100000 {
 			compatible = "qcom,gcc-sdx65";
 			reg = <0x00100000 0x001f7400>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
-			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_pipe_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
 			#power-domain-cells = <1>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -233,32 +241,27 @@
 
 		usb_qmpphy: phy@ff6000 {
 			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
-			reg = <0x00ff6000 0x1c8>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00ff6000 0x2000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
-				 <&gcc GCC_USB3_PHY_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
 			status = "disabled";
 
-			usb_ssphy: phy@ff6200 {
-				reg = <0x00ff6e00 0x160>,
-				      <0x00ff7000 0x1ec>,
-				      <0x00ff6200 0x1e00>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
 		};
 
 		system_noc: interconnect@1620000 {
@@ -520,7 +523,7 @@
 				iommus = <&apps_smmu 0x1a0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};