Adding upstream version 6.10.3.upstream/6.10.3

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 1901 insertions, 1376 deletions

diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 6478a39b3b..e2e922bdc9 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM) += \
+	msm8226-motorola-falcon.dtb \
 	qcom-apq8016-sbc.dtb \
 	qcom-apq8026-asus-sparrow.dtb \
 	qcom-apq8026-huawei-sturgeon.dtb \
@@ -45,7 +46,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8974pro-fairphone-fp2.dtb \
 	qcom-msm8974pro-oneplus-bacon.dtb \
 	qcom-msm8974pro-samsung-klte.dtb \
+	qcom-msm8974pro-samsung-kltechn.dtb \
 	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-leo.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
 	qcom-sdx55-mtp.dtb \
 	qcom-sdx55-t55.dtb \
diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
new file mode 100644
index 0000000000..029e1b1659
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+	model = "Motorola Moto G (2013)";
+	compatible = "motorola,falcon", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+			vsp-supply = <&reg_lcd_pos>;
+			vsn-supply = <&reg_lcd_neg>;
+			vddio-supply = <&vddio_disp_vreg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vddio_disp_vreg: regulator-vddio-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_disp";
+		gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pm8226_l8>;
+		startup-delay-us = <300>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		dhob@f500000 {
+			reg = <0x0f500000 0x40000>;
+			no-map;
+		};
+
+		shob@f540000 {
+			reg = <0x0f540000 0x2000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		/* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+		pinctrl-0 = <&reg_lcd_default>;
+		pinctrl-names = "default";
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <4000000>;
+			regulator-max-microvolt = <6000000>;
+			regulator-active-discharge = <1>;
+			regulator-boot-on;
+			enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp108";
+		reg = <0x48>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&temp_alert_default>;
+		pinctrl-names = "default";
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&pm8226_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-boot-on;
+		};
+
+		pm8226_lvs1: lvs1 {
+			regulator-always-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <2000000>;
+	qcom,fast-charge-current-limit = <1900000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,minimum-input-voltage = <4300000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	reg_lcd_default: reg-lcd-default-state {
+		pins = "gpio31", "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	reg_vddio_disp_default: reg-vddio-disp-default-state {
+		pins = "gpio34";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	temp_alert_default: temp-alert-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-disable;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 9a5ba97877..11e60b74c3 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -87,7 +87,7 @@
 		};
 
 		idle-states {
-			CPU_SPC: spc {
+			CPU_SPC: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <400>;
@@ -1334,6 +1334,16 @@
 				 <&gcc PCIE_PHY_RESET>;
 			reset-names = "axi", "ahb", "por", "pci", "phy";
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		hdmi: hdmi-tx@4a00000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
index 8204e64d9a..ca53dff820 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
@@ -79,7 +79,7 @@
 		};
 
 		idle-states {
-			CPU_SPC: spc {
+			CPU_SPC: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <150>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 681cb3fc80..0fb65f2bbc 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -470,6 +470,16 @@
 				      "phy_ahb";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qpic_bam: dma-controller@7984000 {
@@ -598,24 +608,33 @@
 			reg = <0x90000 0x64>;
 			status = "disabled";
 
-			ethphy0: ethernet-phy@0 {
+			ethernet-phy-package@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "qcom,qca8075-package";
 				reg = <0>;
-			};
 
-			ethphy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+				qcom,tx-drive-strength-milliwatt = <300>;
 
-			ethphy2: ethernet-phy@2 {
-				reg = <2>;
-			};
+				ethphy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-			ethphy3: ethernet-phy@3 {
-				reg = <3>;
-			};
+				ethphy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				ethphy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+
+				ethphy3: ethernet-phy@3 {
+					reg = <3>;
+				};
 
-			ethphy4: ethernet-phy@4 {
-				reg = <4>;
+				ethphy4: ethernet-phy@4 {
+					reg = <4>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 2eb6758b6a..f128510d84 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -1121,6 +1121,16 @@
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1: pcie@1b700000 {
@@ -1172,6 +1182,16 @@
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie2: pcie@1b900000 {
@@ -1223,6 +1243,16 @@
 
 			status = "disabled";
 			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		qsgmii_csr: syscon@1bb00000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
index 525d8c608b..8839b23fc6 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi
@@ -287,6 +287,10 @@
 	status = "okay";
 };
 
+&smbb {
+	status = "okay";
+};
+
 &usb {
 	extcon = <&smbb>;
 	dr_mode = "peripheral";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
index 36328dbe42..1ba403b83c 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
@@ -26,7 +26,7 @@
 };
 
 &CPU_SLEEP_0 {
-	compatible = "qcom,idle-state-spc";
+	compatible = "qcom,idle-state-spc", "arm,idle-state";
 };
 
 &cpu0_acc {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 5efc38d712..5651bb31bd 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -14,6 +14,8 @@
 	#size-cells = <1>;
 	interrupt-parent = <&intc>;
 
+	chosen { };
+
 	clocks {
 		xo_board: xo_board {
 			compatible = "fixed-clock";
@@ -85,7 +87,7 @@
 		};
 
 		idle-states {
-			CPU_SPC: spc {
+			CPU_SPC: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <150>;
@@ -103,7 +105,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0>;
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
new file mode 100644
index 0000000000..b5443fd5b4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
@@ -0,0 +1,818 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-home {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	i2c_led_gpio: i2c-gpio-led {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+		i2c-gpio,delay-us = <2>;
+
+		gpio_expander: gpio@20 {
+			compatible = "nxp,pcal6416";
+			reg = <0x20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			vcc-supply = <&pma8084_s4>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpioex_pin>;
+
+			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+		};
+
+		led-controller@30 {
+			compatible = "panasonic,an30259a";
+			reg = <0x30>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@2 {
+				reg = <2>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_panel: panel-regulator {
+		compatible = "regulator-fixed";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+
+		regulator-name = "panel-vddr-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&max77826_ldo13>;
+		vio-supply = <&pma8084_lvs2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pmic@60 {
+		reg = <0x60>;
+		compatible = "maxim,max77826";
+
+		regulators {
+			max77826_ldo1: LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo2: LDO2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			max77826_ldo3: LDO3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo4: LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo5: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo6: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo7: LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo8: LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo9: LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo10: LDO10 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo11: LDO11 {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo12: LDO12 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo13: LDO13 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo14: LDO14 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo15: LDO15 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_buck: BUCK {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+			};
+
+			max77826_buckboost: BUCKBOOST {
+				regulator-min-microvolt = <3400000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_pins_active>;
+	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+	bluetooth {
+		compatible = "brcm,bcm43540-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pma8084_l2>;
+	vdd-supply = <&pma8084_l22>;
+	vddio-supply = <&pma8084_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e3fa2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+		iovdd-supply = <&pma8084_lvs4>;
+		vddr-supply = <&vreg_panel>;
+
+		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pma8084_l12>;
+};
+
+&pma8084_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	panel_en_pin: panel-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	panel_rst_pin: panel-rst-state {
+		pins = "gpio17";
+		function = "normal";
+		bias-disable;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio21";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+	mss-supply = <&pma8084_s6>;
+	mx-supply = <&pma8084_s1>;
+	pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pma8084-regulators";
+
+		pma8084_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pma8084_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pma8084_s6: s6 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pma8084_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pma8084_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pma8084_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pma8084_l25: l25 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pma8084_l26: l26 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_lvs1: lvs1 {};
+		pma8084_lvs2: lvs2 {};
+		pma8084_lvs3: lvs3 {};
+		pma8084_lvs4: lvs4 {};
+
+		pma8084_5vs1: 5vs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pma8084_l20>;
+	vqmmc-supply = <&pma8084_s4>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pma8084_s4>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		/*
+		 * Allow all klte* variants to load the same NVRAM file,
+		 * as they have little difference in the WiFi part.
+		 */
+		brcm,board-type = "samsung,klte";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+	};
+};
+
+&sdhc_3 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&pma8084_l21>;
+	vqmmc-supply = <&pma8084_l13>;
+
+	/*
+	 * cd-gpio is intentionally disabled. If enabled, an SD card
+	 * present during boot is not initialized correctly. Without
+	 * cd-gpios the driver resorts to polling, so hotplug works.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+	/* This seems suspicious, but somebody with this device should look into it. */
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "blsp_uart8";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	bt_pins: bt-pins-state {
+		hostwake-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <16>;
+		};
+
+		devwake-pins {
+			pins = "gpio91";
+			function = "gpio";
+			drive-strength = <2>;
+		};
+	};
+
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdhc3_cd_pin: sdc3-cd-on-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	gpioex_pin: gpioex-state {
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	wifi_pin: wifi-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
index b93539e2b8..954665f3a9 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
@@ -1,817 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pma8084.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
 
 / {
 	model = "Samsung Galaxy S5";
 	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
-	chassis-type = "handset";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_3; /* SDC2 SD card slot */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-home {
-			label = "home_key";
-			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_HOMEPAGE>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-gpio-touchkey {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_touchkey_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_pin>;
-
-			vcc-supply = <&max77826_ldo15>;
-			vdd-supply = <&pma8084_l19>;
-
-			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-		};
-	};
-
-	i2c-gpio-led {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_led_gpioex_pins>;
-
-		i2c-gpio,delay-us = <2>;
-
-		gpio_expander: gpio@20 {
-			compatible = "nxp,pcal6416";
-			reg = <0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			vcc-supply = <&pma8084_s4>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpioex_pin>;
-
-			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
-		};
-
-		led-controller@30 {
-			compatible = "panasonic,an30259a";
-			reg = <0x30>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@1 {
-				reg = <1>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@2 {
-				reg = <2>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_panel: panel-regulator {
-		compatible = "regulator-fixed";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-
-		regulator-name = "panel-vddr-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
-};
-
-&blsp1_i2c2 {
-	status = "okay";
-
-	touchscreen@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		vdd-supply = <&max77826_ldo13>;
-		vio-supply = <&pma8084_lvs2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&blsp1_i2c6 {
-	status = "okay";
-
-	pmic@60 {
-		reg = <0x60>;
-		compatible = "maxim,max77826";
-
-		regulators {
-			max77826_ldo1: LDO1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo2: LDO2 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-			};
-
-			max77826_ldo3: LDO3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			max77826_ldo4: LDO4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo5: LDO5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo6: LDO6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo7: LDO7 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo8: LDO8 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo9: LDO9 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_ldo10: LDO10 {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo11: LDO11 {
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2950000>;
-			};
-
-			max77826_ldo12: LDO12 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo13: LDO13 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo14: LDO14 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			max77826_ldo15: LDO15 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			max77826_buck: BUCK {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-			};
-
-			max77826_buckboost: BUCKBOOST {
-				regulator-min-microvolt = <3400000>;
-				regulator-max-microvolt = <3400000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
-};
-
-&blsp2_i2c6 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max17048";
-		reg = <0x36>;
-
-		maxim,double-soc;
-		maxim,rcomp = /bits/ 8 <0x56>;
-
-		interrupt-parent = <&pma8084_gpios>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&fuelgauge_pin>;
-	};
-};
-
-&blsp2_uart2 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_pins_active>;
-	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
-
-	bluetooth {
-		compatible = "brcm,bcm43540-bt";
-		max-speed = <3000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_pins>;
-		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wakeup";
-	};
-};
-
-&gpu {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	status = "okay";
-
-	vdda-supply = <&pma8084_l2>;
-	vdd-supply = <&pma8084_l22>;
-	vddio-supply = <&pma8084_l12>;
-
-	panel: panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e3fa2";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
-		iovdd-supply = <&pma8084_lvs4>;
-		vddr-supply = <&vreg_panel>;
-
-		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&mdss_dsi0_out>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
-};
-
-&mdss_dsi0_phy {
-	status = "okay";
-
-	vddio-supply = <&pma8084_l12>;
 };
 
-&pma8084_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio3", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touchkey_pin: touchkey-int-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	touch_pin: touchscreen-int-state {
-		pins = "gpio8";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
-
-	panel_en_pin: panel-en-state {
-		pins = "gpio14";
-		function = "normal";
-		bias-pull-up;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	wlan_sleep_clk_pin: wlan-sleep-clk-state {
-		pins = "gpio16";
-		function = "func2";
-
-		output-high;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	panel_rst_pin: panel-rst-state {
-		pins = "gpio17";
-		function = "normal";
-		bias-disable;
-		power-source = <PMA8084_GPIO_S4>;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-
-	fuelgauge_pin: fuelgauge-int-state {
-		pins = "gpio21";
-		function = "normal";
-		bias-disable;
-		input-enable;
-		power-source = <PMA8084_GPIO_S4>;
-	};
+&i2c_led_gpio {
+	scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
-&remoteproc_adsp {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-};
-
-&remoteproc_mss {
-	status = "okay";
-	cx-supply = <&pma8084_s2>;
-	mss-supply = <&pma8084_s6>;
-	mx-supply = <&pma8084_s1>;
-	pll-supply = <&pma8084_l12>;
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pma8084-regulators";
-
-		pma8084_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-
-		pma8084_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_s3: s3 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_s5: s5 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-
-		pma8084_s6: s6 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pma8084_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l3: l3 {
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pma8084_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l11: l11 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pma8084_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pma8084_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pma8084_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pma8084_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pma8084_l17: l17 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
-		pma8084_l19: l19 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-		};
-
-		pma8084_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pma8084_l23: l23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pma8084_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pma8084_l25: l25 {
-			regulator-min-microvolt = <2100000>;
-			regulator-max-microvolt = <2100000>;
-		};
-
-		pma8084_l26: l26 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pma8084_l27: l27 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pma8084_lvs1: lvs1 {};
-		pma8084_lvs2: lvs2 {};
-		pma8084_lvs3: lvs3 {};
-		pma8084_lvs4: lvs4 {};
-
-		pma8084_5vs1: 5vs1 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pma8084_l20>;
-	vqmmc-supply = <&pma8084_s4>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	vqmmc-supply = <&pma8084_s4>;
-	non-removable;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-
-	wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
-	};
-};
-
-&sdhc_3 {
-	status = "okay";
-	max-frequency = <100000000>;
-	vmmc-supply = <&pma8084_l21>;
-	vqmmc-supply = <&pma8084_l13>;
-
-	/*
-	 * cd-gpio is intentionally disabled. If enabled, an SD card
-	 * present during boot is not initialized correctly. Without
-	 * cd-gpios the driver resorts to polling, so hotplug works.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
-	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
-};
-
-&tlmm {
-	/* This seems suspicious, but somebody with this device should look into it. */
-	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "blsp_uart8";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
-		pins = "gpio45", "gpio46", "gpio47", "gpio48";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	bt_pins: bt-pins-state {
-		hostwake-pins {
-			pins = "gpio75";
-			function = "gpio";
-			drive-strength = <16>;
-		};
-
-		devwake-pins {
-			pins = "gpio91";
-			function = "gpio";
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_on: sdhc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <4>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <4>;
-			bias-pull-up;
-		};
-	};
-
-	sdc3_on: sdc3-on-state {
-		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-		function = "sdc3";
-		drive-strength = <8>;
-		bias-disable;
-	};
-
-	sdhc3_cd_pin: sdc3-cd-on-state {
-		pins = "gpio62";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	sdc2_on: sdhc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-	};
-
-	i2c_touchkey_pins: i2c-touchkey-state {
-		pins = "gpio95", "gpio96";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	i2c_led_gpioex_pins: i2c-led-gpioex-state {
-		pins = "gpio120", "gpio121";
-		function = "gpio";
-		bias-pull-down;
-	};
-
-	gpioex_pin: gpioex-state {
-		pins = "gpio145";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
-	wifi_pin: wifi-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-pull-down;
-	};
-
-	panel_te_pin: panel-state {
-		pins = "gpio12";
-		function = "mdp_vsync";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pma8084_l6>;
-	v3p3-supply = <&pma8084_l24>;
-
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+&i2c_led_gpioex_pins {
+	pins = "gpio120", "gpio121";
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts
new file mode 100644
index 0000000000..b902e31b16
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-samsung-klte-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5 China";
+	compatible = "samsung,kltechn", "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+};
+
+&i2c_led_gpio {
+	scl-gpios = <&tlmm 61 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&tlmm 60 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_led_gpioex_pins {
+	pins = "gpio60", "gpio61";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index ee94741a26..409d1798de 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,60 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pm8841.dtsi"
-#include "pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
 
 / {
 	model = "Sony Xperia Z2 Tablet";
 	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
 	chassis-type = "tablet";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp2_uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		key-volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		key-camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		key-camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		key-volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
 	vreg_bl_vddio: lcd-backlight-vddio {
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_bl_vddio";
@@ -67,107 +18,15 @@
 		vin-supply = <&pm8941_s3>;
 		startup-delay-us = <70000>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_backlight_en_pin_a>;
-	};
-
-	vreg_vsp: lcd-dcdc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_vsp";
-		regulator-min-microvolt = <5600000>;
-		regulator-max-microvolt = <5600000>;
-
-		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
-	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
 		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
 	};
-
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "vph-pwr";
-
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		regulator-always-on;
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&blsp1_uart2 {
-	status = "okay";
 };
 
-&blsp2_i2c2 {
-	status = "okay";
+&blsp2_i2c5 {
 	clock-frequency = <355000>;
 
-	synaptics@2c {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x2c>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd-supply = <&pm8941_l22>;
-		vio-supply = <&pm8941_lvs3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_pin>;
-
-		syna,startup-delay-ms = <100>;
-
-		rmi4-f01@1 {
-			reg = <0x1>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f11@11 {
-			reg = <0x11>;
-			syna,sensor-type = <1>;
-			touchscreen-inverted-x;
-		};
-	};
-};
-
-&blsp2_i2c5 {
 	status = "okay";
-	clock-frequency = <355000>;
 
 	lp8566_wled: backlight@2c {
 		compatible = "ti,lp8556";
@@ -182,42 +41,52 @@
 			rom-addr = /bits/ 8 <0xa0>;
 			rom-val = /bits/ 8 <0xff>;
 		};
+
 		rom-a1h {
 			rom-addr = /bits/ 8 <0xa1>;
 			rom-val = /bits/ 8 <0x3f>;
 		};
+
 		rom-a2h {
 			rom-addr = /bits/ 8 <0xa2>;
 			rom-val = /bits/ 8 <0x20>;
 		};
+
 		rom-a3h {
 			rom-addr = /bits/ 8 <0xa3>;
 			rom-val = /bits/ 8 <0x5e>;
 		};
+
 		rom-a4h {
 			rom-addr = /bits/ 8 <0xa4>;
 			rom-val = /bits/ 8 <0x02>;
 		};
+
 		rom-a5h {
 			rom-addr = /bits/ 8 <0xa5>;
 			rom-val = /bits/ 8 <0x04>;
 		};
+
 		rom-a6h {
 			rom-addr = /bits/ 8 <0xa6>;
 			rom-val = /bits/ 8 <0x80>;
 		};
+
 		rom-a7h {
 			rom-addr = /bits/ 8 <0xa7>;
 			rom-val = /bits/ 8 <0xf7>;
 		};
+
 		rom-a9h {
 			rom-addr = /bits/ 8 <0xa9>;
 			rom-val = /bits/ 8 <0x80>;
 		};
+
 		rom-aah {
 			rom-addr = /bits/ 8 <0xaa>;
 			rom-val = /bits/ 8 <0x0f>;
 		};
+
 		rom-aeh {
 			rom-addr = /bits/ 8 <0xae>;
 			rom-val = /bits/ 8 <0x0f>;
@@ -232,8 +101,8 @@
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <3000000>;
 
-		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+		pinctrl-names = "default";
 
 		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
@@ -241,339 +110,26 @@
 	};
 };
 
-&pm8941_coincell {
-	status = "okay";
-
-	qcom,rset-ohms = <2100>;
-	qcom,vset-millivolts = <3000>;
-};
-
 &pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active-state {
-		pins = "gpio2", "gpio5";
-		function = "normal";
-
-		bias-pull-up;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
 	bt_reg_on_pin: bt-reg-on-state {
 		pins = "gpio16";
 		function = "normal";
-
 		output-low;
 		power-source = <PM8941_GPIO_S3>;
 	};
-
-	wlan_sleep_clk_pin: wl-sleep-clk-state {
-		pins = "gpio17";
-		function = "func2";
-
-		output-high;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	wlan_regulator_pin: wl-reg-active-state {
-		pins = "gpio18";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-	};
-
-	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
-		pins = "gpio20";
-		function = "normal";
-
-		bias-disable;
-		power-source = <PM8941_GPIO_S3>;
-		input-disable;
-		output-low;
-	};
-
-};
-
-&pm8941_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	multi-led {
-		color = <LED_COLOR_ID_RGB>;
-		function = LED_FUNCTION_STATUS;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		led@5 {
-			reg = <5>;
-			color = <LED_COLOR_ID_BLUE>;
-		};
-
-		led@6 {
-			reg = <6>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led@7 {
-			reg = <7>;
-			color = <LED_COLOR_ID_RED>;
-		};
-	};
-};
-
-&remoteproc_adsp {
-	cx-supply = <&pm8841_s2>;
-	status = "okay";
-};
-
-&remoteproc_mss {
-	cx-supply = <&pm8841_s2>;
-	mss-supply = <&pm8841_s3>;
-	mx-supply = <&pm8841_s1>;
-	pll-supply = <&pm8941_l12>;
-	status = "okay";
 };
 
 &rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8841-regulators";
-
-		pm8841_s1: s1 {
-			regulator-min-microvolt = <675000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s2: s2 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s3: s3 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-
-		pm8841_s4: s4 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1050000>;
-		};
-	};
-
 	regulators-1 {
-		compatible = "qcom,rpm-pm8941-regulators";
-
-		vdd_l1_l3-supply = <&pm8941_s1>;
-		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-		vdd_l4_l11-supply = <&pm8941_s1>;
-		vdd_l5_l7-supply = <&pm8941_s2>;
-		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-		vdd_l21-supply = <&vreg_boost>;
-
-		pm8941_s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s2: s2 {
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-boot-on;
-		};
-
-		pm8941_s3: s3 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-system-load = <154000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_s4: s4 {
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		pm8941_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l3: l3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8941_l4: l4 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8941_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l9: l9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
 		pm8941_l11: l11 {
 			regulator-min-microvolt = <1300000>;
 			regulator-max-microvolt = <1350000>;
 		};
 
-		pm8941_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pm8941_l13: l13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l14: l14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8941_l15: l15 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8941_l16: l16 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l17: l17 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-
-		pm8941_l18: l18 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <2850000>;
-		};
-
 		pm8941_l19: l19 {
 			regulator-min-microvolt = <2850000>;
 			regulator-max-microvolt = <2850000>;
 		};
-
-		pm8941_l20: l20 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-system-load = <500000>;
-			regulator-allow-set-load;
-			regulator-boot-on;
-		};
-
-		pm8941_l21: l21 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-boot-on;
-		};
-
-		pm8941_l22: l22 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8941_l23: l23 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-
-		pm8941_l24: l24 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-			regulator-boot-on;
-		};
-
-		pm8941_lvs3: lvs3 {};
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l20>;
-	vqmmc-supply = <&pm8941_s3>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	vmmc-supply = <&pm8941_l21>;
-	vqmmc-supply = <&pm8941_l13>;
-
-	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
-};
-
-&sdhc_3 {
-	status = "okay";
-
-	max-frequency = <100000000>;
-	vmmc-supply = <&vreg_wlan>;
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc3_on>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	bcrmf@1 {
-		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-		reg = <1>;
-
-		brcm,drive-strength = <10>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_sleep_clk_pin>;
 	};
 };
 
@@ -591,75 +147,13 @@
 	status = "okay";
 };
 
-&tlmm {
-	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
-		pins = "gpio69";
-		function = "gpio";
-		drive-strength = <10>;
-		output-low;
-		bias-disable;
-	};
-
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
-
-	sdc2_on: sdc2-on-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <6>;
-			bias-disable;
-		};
-
-		cmd-data-pins {
-			pins = "sdc2_cmd", "sdc2_data";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
-
-		cd-pins {
-			pins = "gpio62";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	sdc3_on: sdc3-on-state {
-		clk-pins {
-			pins = "gpio40";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio39";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio35", "gpio36", "gpio37", "gpio38";
-			function = "sdc3";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
-	};
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_lvs3>;
+};
 
-	ts_int_pin: ts-int-pin-state {
-		pins = "gpio86";
+&tlmm {
+	bt_dev_wake_pin: bt-dev-wake-state {
+		pins = "gpio96";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
@@ -673,33 +167,11 @@
 		output-low;
 	};
 
-	bt_dev_wake_pin: bt-dev-wake-state {
-		pins = "gpio96";
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+		pins = "gpio69";
 		function = "gpio";
-		drive-strength = <2>;
+		drive-strength = <10>;
+		output-low;
 		bias-disable;
 	};
 };
-
-&usb {
-	status = "okay";
-
-	phys = <&usb_hs1_phy>;
-	phy-select = <&tcsr 0xb000 0>;
-	extcon = <&smbb>, <&usb_id>;
-	vbus-supply = <&chg_otg>;
-
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-};
-
-&usb_hs1_phy {
-	status = "okay";
-
-	v1p8-supply = <&pm8941_l6>;
-	v3p3-supply = <&pm8941_l24>;
-
-	extcon = <&smbb>;
-	qcom,init-seq = /bits/ 8 <0x1 0x64>;
-};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
new file mode 100644
index 0000000000..e129bb1bd6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_pin_a>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+		pinctrl-names = "default";
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wlan_regulator_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	clock-frequency = <355000>;
+
+	status = "okay";
+
+	synaptics_touchscreen: synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		/* vio-supply is set in dts */
+
+		pinctrl-0 = <&ts_int_pin>;
+		pinctrl-names = "default";
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+			touchscreen-inverted-x;
+		};
+	};
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio17";
+		function = "func2";
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio18";
+		function = "normal";
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+		pins = "gpio20";
+		function = "normal";
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+		input-disable;
+		output-low;
+	};
+};
+
+&pm8941_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+	status = "okay";
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	non-removable;
+
+	pinctrl-0 = <&sdc3_on>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		clk-pins {
+			pins = "gpio40";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio39";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio35", "gpio36", "gpio37", "gpio38";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	ts_int_pin: ts-int-pin-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
new file mode 100644
index 0000000000..1ed6e1cc21
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z3";
+	compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&gpio_keys_pin_a {
+	pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <3000000>;
+	qcom,fast-charge-current-limit = <2150000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4280000>;
+	qcom,minimum-input-voltage = <4200000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_s3>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index edc9aaf828..68fa5859d2 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -378,6 +378,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie_ep: pcie-ep@1c00000 {