summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1/Kconfig
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm/mach-omap1/Kconfig
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/mach-omap1/Kconfig')
-rw-r--r--arch/arm/mach-omap1/Kconfig165
1 files changed, 165 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
new file mode 100644
index 0000000000..cbf703f0d8
--- /dev/null
+++ b/arch/arm/mach-omap1/Kconfig
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_OMAP1
+ bool "TI OMAP1"
+ depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
+ depends on CPU_LITTLE_ENDIAN
+ depends on ATAGS
+ select ARCH_OMAP
+ select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_OMAP
+ select CLKSRC_MMIO
+ select FORCE_PCI if PCCARD
+ select GPIOLIB
+ help
+ Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+
+if ARCH_OMAP1
+
+menu "TI OMAP1 specific features"
+
+comment "OMAP Core Type"
+
+config ARCH_OMAP15XX
+ depends on ARCH_MULTI_V4T
+ default y
+ bool "OMAP15xx Based System"
+ select CPU_ARM925T
+ select OMAP_MPU_TIMER
+
+config ARCH_OMAP16XX
+ depends on ARCH_MULTI_V5
+ bool "OMAP16xx Based System"
+ select ARCH_OMAP_OTG
+ select CPU_ARM926T
+ select OMAP_DM_TIMER
+
+config ARCH_OMAP
+ bool
+
+comment "OMAP Feature Selections"
+
+config OMAP_MUX
+ bool "OMAP multiplexing support"
+ default y
+ help
+ Pin multiplexing support for OMAP boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config OMAP_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on OMAP_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config OMAP_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on OMAP_MUX
+ default y
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect OMAP_MUX for your product.
+
+config OMAP_32K_TIMER
+ bool "Use 32KHz timer"
+ depends on ARCH_OMAP16XX
+ default ARCH_OMAP16XX
+ help
+ Select this option if you want to enable the OMAP 32KHz timer.
+ This timer saves power compared to the OMAP_MPU_TIMER, and has
+ support for no tick during idle. The 32KHz timer provides less
+ intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+ currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
+
+ On OMAP2PLUS this value is only used for CONFIG_HZ and
+ CLOCK_TICK_RATE compile time calculation.
+ The actual timer selection is done in the board file
+ through the (DT_)MACHINE_START structure.
+
+config OMAP_MPU_TIMER
+ bool "Use mpu timer"
+ depends on ARCH_OMAP1
+ help
+ Select this option if you want to use the OMAP mpu timer. This
+ timer provides more intra-tick resolution than the 32KHz timer,
+ but consumes more power.
+
+config OMAP_SERIAL_WAKE
+ bool "Enable wake-up events for serial ports"
+ depends on ARCH_OMAP1 && OMAP_MUX
+ default y
+ help
+ Select this option if you want to have your system wake up
+ to data on the serial RX line. This allows you to wake the
+ system from serial console.
+
+config OMAP_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_OMAP
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
+
+config ARCH_OMAP_OTG
+ bool
+
+comment "OMAP Board Type"
+
+config MACH_OMAP_OSK
+ bool "TI OSK Support"
+ depends on ARCH_OMAP16XX
+ help
+ TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
+ if you have such a board.
+
+config MACH_OMAP_PALMTE
+ bool "Palm Tungsten E"
+ depends on ARCH_OMAP15XX
+ help
+ Support for the Palm Tungsten E PDA. To boot the kernel, you'll
+ need a PalmOS compatible bootloader; check out
+ http://palmtelinux.sourceforge.net/ for more information.
+ Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_SX1
+ bool "Siemens SX1"
+ depends on ARCH_OMAP15XX
+ select I2C
+ help
+ Support for the Siemens SX1 phone. To boot the kernel,
+ you'll need a SX1 compatible bootloader; check out
+ http://forum.oslik.ru and
+ https://www.handhelds.org/moin/moin.cgi/SiemensSX1
+ for more information.
+ Say Y here if you have such a phone, say NO otherwise.
+
+config MACH_NOKIA770
+ bool "Nokia 770"
+ depends on ARCH_OMAP16XX
+ help
+ Support for the Nokia 770 Internet Tablet. Say Y here if you
+ have such a device.
+
+config MACH_AMS_DELTA
+ bool "Amstrad E3 (Delta)"
+ depends on ARCH_OMAP15XX
+ select FIQ
+ select GPIO_GENERIC_PLATFORM
+ select LEDS_GPIO_REGISTER
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
+ help
+ Support for the Amstrad E3 (codename Delta) videophone. Say Y here
+ if you have such a device.
+
+endmenu
+
+endif