Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 243 insertions, 0 deletions

diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
new file mode 100644
index 0000000000..2bf8ec75e9
--- /dev/null
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+#define MV2120_NOR_BOOT_BASE	0xf4000000
+#define MV2120_NOR_BOOT_SIZE	SZ_512K
+
+#define MV2120_GPIO_RTC_IRQ	3
+#define MV2120_GPIO_KEY_RESET	17
+#define MV2120_GPIO_KEY_POWER	18
+#define MV2120_GPIO_POWER_OFF	19
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data mv2120_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data mv2120_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mtd_partition mv2120_partitions[] = {
+	{
+		.name	= "firmware",
+		.size	= 0x00080000,
+		.offset	= 0,
+	},
+};
+
+static struct physmap_flash_data mv2120_nor_flash_data = {
+	.width		= 1,
+	.parts		= mv2120_partitions,
+	.nr_parts	= ARRAY_SIZE(mv2120_partitions)
+};
+
+static struct resource mv2120_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= MV2120_NOR_BOOT_BASE,
+	.end		= MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mv2120_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mv2120_nor_flash_data,
+	},
+	.resource	= &mv2120_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+static struct gpio_keys_button mv2120_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= MV2120_GPIO_KEY_RESET,
+		.desc		= "reset",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_POWER,
+		.gpio		= MV2120_GPIO_KEY_POWER,
+		.desc		= "power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv2120_button_data = {
+	.buttons	= mv2120_buttons,
+	.nbuttons	= ARRAY_SIZE(mv2120_buttons),
+};
+
+static struct platform_device mv2120_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv2120_button_data,
+	},
+};
+
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int mv2120_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* Sys status LED */
+	MPP1_GPIO,		/* Sys error LED */
+	MPP2_GPIO,		/* OverTemp interrupt */
+	MPP3_GPIO,		/* RTC interrupt */
+	MPP4_GPIO,		/* V_LED 5V */
+	MPP5_GPIO,		/* V_LED 3.3V */
+	MPP6_UNUSED,
+	MPP7_UNUSED,
+	MPP8_GPIO,		/* SATA 0 fail LED */
+	MPP9_GPIO,		/* SATA 1 fail LED */
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,		/* SATA 0 presence */
+	MPP13_SATA_LED,		/* SATA 1 presence */
+	MPP14_SATA_LED,		/* SATA 0 active */
+	MPP15_SATA_LED,		/* SATA 1 active */
+	MPP16_UNUSED,
+	MPP17_GPIO,		/* Reset button */
+	MPP18_GPIO,		/* Power button */
+	MPP19_GPIO,		/* Power off */
+	0,
+};
+
+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
+	I2C_BOARD_INFO("pcf8563", 0x51),
+	.irq	= 0,
+};
+
+static struct gpio_led mv2120_led_pins[] = {
+	{
+		.name			= "mv2120:blue:health",
+		.gpio			= 0,
+	},
+	{
+		.name			= "mv2120:red:health",
+		.gpio			= 1,
+	},
+	{
+		.name			= "mv2120:led:bright",
+		.gpio			= 4,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "mv2120:led:dimmed",
+		.gpio			= 5,
+	},
+	{
+		.name			= "mv2120:red:sata0",
+		.gpio			= 8,
+		.active_low		= 1,
+	},
+	{
+		.name			= "mv2120:red:sata1",
+		.gpio			= 9,
+		.active_low		= 1,
+	},
+
+};
+
+static struct gpio_led_platform_data mv2120_led_data = {
+	.leds		= mv2120_led_pins,
+	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
+};
+
+static struct platform_device mv2120_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv2120_led_data,
+	}
+};
+
+static void mv2120_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
+}
+
+static void __init mv2120_init(void)
+{
+	/* Setup basic Orion functions. Need to be called early. */
+	orion5x_init();
+
+	orion5x_mpp_conf(mv2120_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&mv2120_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&mv2120_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MV2120_NOR_BOOT_BASE,
+				    MV2120_NOR_BOOT_SIZE);
+	platform_device_register(&mv2120_nor_flash);
+
+	platform_device_register(&mv2120_button_device);
+
+	if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
+		if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
+			mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
+		else
+			gpio_free(MV2120_GPIO_RTC_IRQ);
+	}
+	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+	platform_device_register(&mv2120_leds);
+
+	/* register mv2120 specific power-off method */
+	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
+		pr_err("mv2120: failed to setup power-off GPIO\n");
+	pm_power_off = mv2120_power_off;
+}
+
+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(MV2120, "HP Media Vault mv2120")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= mv2120_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END