Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

23 files changed, 3421 insertions, 0 deletions

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
new file mode 100644
index 000000000..3a06ba263
--- /dev/null
+++ b/arch/arm/mach-tegra/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+menuconfig ARCH_TEGRA
+	bool "NVIDIA Tegra"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GIC
+	select CLKSRC_MMIO
+	select GPIOLIB
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select PM
+	select PM_OPP
+	select RESET_CONTROLLER
+	select SOC_BUS
+	select ZONE_DMA if ARM_LPAE
+	help
+	  This enables support for NVIDIA Tegra based systems.
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
new file mode 100644
index 000000000..a2bb55bc0
--- /dev/null
+++ b/arch/arm/mach-tegra/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y                                   += io.o
+obj-y                                   += irq.o
+obj-y					+= pm.o
+obj-y					+= reset.o
+obj-y					+= reset-handler.o
+obj-y					+= sleep.o
+obj-y					+= tegra.o
+obj-y					+= sleep-tegra20.o
+obj-y					+= sleep-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pm-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pm-tegra30.o
+obj-$(CONFIG_SMP)			+= platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
+
+obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= pm-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= pm-tegra30.o
+
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-paz00.o
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
new file mode 100644
index 000000000..18d37f90c
--- /dev/null
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-tegra/board-paz00.c
+ *
+ * Copyright (C) 2011 Marc Dietrich <marvin24@gmx.de>
+ *
+ * Based on board-harmony.c
+ * Copyright (C) 2010 Google, Inc.
+ */
+
+#include <linux/property.h>
+#include <linux/gpio/machine.h>
+#include <linux/platform_device.h>
+
+#include "board.h"
+
+static struct property_entry wifi_rfkill_prop[] __initdata = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	{ },
+};
+
+static struct platform_device wifi_rfkill_device = {
+	.name	= "rfkill_gpio",
+	.id	= -1,
+};
+
+static struct gpiod_lookup_table wifi_gpio_lookup = {
+	.dev_id = "rfkill_gpio",
+	.table = {
+		GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
+		GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
+		{ },
+	},
+};
+
+void __init tegra_paz00_wifikill_init(void)
+{
+	device_create_managed_software_node(&wifi_rfkill_device.dev, wifi_rfkill_prop, NULL);
+	gpiod_add_lookup_table(&wifi_gpio_lookup);
+	platform_device_register(&wifi_rfkill_device);
+}
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
new file mode 100644
index 000000000..7b3ef0dc9
--- /dev/null
+++ b/arch/arm/mach-tegra/board.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/mach-tegra/board.h
+ *
+ * Copyright (c) 2013 NVIDIA Corporation. All rights reserved.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ */
+
+#ifndef __MACH_TEGRA_BOARD_H
+#define __MACH_TEGRA_BOARD_H
+
+#include <linux/types.h>
+#include <linux/reboot.h>
+
+void __init tegra_map_common_io(void);
+void __init tegra_init_irq(void);
+
+void __init tegra_paz00_wifikill_init(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
new file mode 100644
index 000000000..d59387c4d
--- /dev/null
+++ b/arch/arm/mach-tegra/common.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2011, ARM Ltd.
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ */
+
+#ifndef __MACH_TEGRA_COMMON_H
+#define __MACH_TEGRA_COMMON_H
+
+extern const struct smp_operations tegra_smp_ops;
+
+extern int tegra_cpu_kill(unsigned int cpu);
+extern void tegra_cpu_die(unsigned int cpu);
+
+#endif
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
new file mode 100644
index 000000000..5c907c2c0
--- /dev/null
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *  Copyright (c) 2010, 2012-2013, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/clk/tegra.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+
+#include <soc/tegra/common.h>
+#include <soc/tegra/fuse.h>
+
+#include <asm/smp_plat.h>
+
+#include "common.h"
+#include "sleep.h"
+
+static void (*tegra_hotplug_shutdown)(void);
+
+int tegra_cpu_kill(unsigned cpu)
+{
+	cpu = cpu_logical_map(cpu);
+
+	/* Clock gate the CPU */
+	tegra_wait_cpu_in_reset(cpu);
+	tegra_disable_cpu_clock(cpu);
+
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void tegra_cpu_die(unsigned int cpu)
+{
+	if (!tegra_hotplug_shutdown) {
+		WARN(1, "hotplug is not yet initialized\n");
+		return;
+	}
+
+	/* Clean L1 data cache */
+	tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
+
+	/* Shut down the current CPU. */
+	tegra_hotplug_shutdown();
+
+	/* Should never return here. */
+	BUG();
+}
+
+static int __init tegra_hotplug_init(void)
+{
+	if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
+		return 0;
+
+	if (!soc_is_tegra())
+		return 0;
+
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20)
+		tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_get_chip_id() == TEGRA30)
+		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_get_chip_id() == TEGRA114)
+		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124)
+		tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
+
+	return 0;
+}
+pure_initcall(tegra_hotplug_init);
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
new file mode 100644
index 000000000..afdeb3205
--- /dev/null
+++ b/arch/arm/mach-tegra/io.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-tegra/io.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/mach/map.h>
+#include <asm/page.h>
+
+#include "board.h"
+#include "iomap.h"
+
+static struct map_desc tegra_io_desc[] __initdata = {
+	{
+		.virtual = (unsigned long)IO_PPSB_VIRT,
+		.pfn = __phys_to_pfn(IO_PPSB_PHYS),
+		.length = IO_PPSB_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)IO_APB_VIRT,
+		.pfn = __phys_to_pfn(IO_APB_PHYS),
+		.length = IO_APB_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)IO_CPU_VIRT,
+		.pfn = __phys_to_pfn(IO_CPU_PHYS),
+		.length = IO_CPU_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)IO_IRAM_VIRT,
+		.pfn = __phys_to_pfn(IO_IRAM_PHYS),
+		.length = IO_IRAM_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init tegra_map_common_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
+}
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
new file mode 100644
index 000000000..4cb7e5fee
--- /dev/null
+++ b/arch/arm/mach-tegra/iomap.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ */
+
+#ifndef __MACH_TEGRA_IOMAP_H
+#define __MACH_TEGRA_IOMAP_H
+
+#include <linux/pgtable.h>
+#include <linux/sizes.h>
+
+#define TEGRA_IRAM_BASE			0x40000000
+#define TEGRA_IRAM_SIZE			SZ_256K
+
+#define TEGRA_ARM_PERIF_BASE		0x50040000
+#define TEGRA_ARM_PERIF_SIZE		SZ_8K
+
+#define TEGRA_ARM_INT_DIST_BASE		0x50041000
+#define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
+
+#define TEGRA_TMR1_BASE			0x60005000
+#define TEGRA_TMR1_SIZE			SZ_8
+
+#define TEGRA_TMR2_BASE			0x60005008
+#define TEGRA_TMR2_SIZE			SZ_8
+
+#define TEGRA_TMRUS_BASE		0x60005010
+#define TEGRA_TMRUS_SIZE		SZ_64
+
+#define TEGRA_TMR3_BASE			0x60005050
+#define TEGRA_TMR3_SIZE			SZ_8
+
+#define TEGRA_TMR4_BASE			0x60005058
+#define TEGRA_TMR4_SIZE			SZ_8
+
+#define TEGRA_CLK_RESET_BASE		0x60006000
+#define TEGRA_CLK_RESET_SIZE		SZ_4K
+
+#define TEGRA_FLOW_CTRL_BASE		0x60007000
+#define TEGRA_FLOW_CTRL_SIZE		20
+
+#define TEGRA_SB_BASE			0x6000C200
+#define TEGRA_SB_SIZE			256
+
+#define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
+#define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
+
+#define TEGRA_APB_MISC_BASE		0x70000000
+#define TEGRA_APB_MISC_SIZE		SZ_4K
+
+#define TEGRA_UARTA_BASE		0x70006000
+#define TEGRA_UARTA_SIZE		SZ_64
+
+#define TEGRA_UARTB_BASE		0x70006040
+#define TEGRA_UARTB_SIZE		SZ_64
+
+#define TEGRA_UARTC_BASE		0x70006200
+#define TEGRA_UARTC_SIZE		SZ_256
+
+#define TEGRA_UARTD_BASE		0x70006300
+#define TEGRA_UARTD_SIZE		SZ_256
+
+#define TEGRA_UARTE_BASE		0x70006400
+#define TEGRA_UARTE_SIZE		SZ_256
+
+#define TEGRA_PMC_BASE			0x7000E400
+#define TEGRA_PMC_SIZE			SZ_256
+
+#define TEGRA_EMC_BASE			0x7000F400
+#define TEGRA_EMC_SIZE			SZ_1K
+
+#define TEGRA_EMC0_BASE			0x7001A000
+#define TEGRA_EMC0_SIZE			SZ_2K
+
+#define TEGRA_EMC1_BASE			0x7001A800
+#define TEGRA_EMC1_SIZE			SZ_2K
+
+#define TEGRA124_EMC_BASE		0x7001B000
+#define TEGRA124_EMC_SIZE		SZ_2K
+
+#define TEGRA_CSITE_BASE		0x70040000
+#define TEGRA_CSITE_SIZE		SZ_256K
+
+/* On TEGRA, many peripherals are very closely packed in
+ * two 256MB io windows (that actually only use about 64KB
+ * at the start of each).
+ *
+ * We will just map the first MMU section of each window (to minimize
+ * pt entries needed) and provide a macro to transform physical
+ * io addresses to an appropriate void __iomem *.
+ */
+
+#define IO_IRAM_PHYS	0x40000000
+#define IO_IRAM_VIRT	IOMEM(0xFE400000)
+#define IO_IRAM_SIZE	SZ_256K
+
+#define IO_CPU_PHYS	0x50040000
+#define IO_CPU_VIRT	IOMEM(0xFE440000)
+#define IO_CPU_SIZE	SZ_16K
+
+#define IO_PPSB_PHYS	0x60000000
+#define IO_PPSB_VIRT	IOMEM(0xFE200000)
+#define IO_PPSB_SIZE	SECTION_SIZE
+
+#define IO_APB_PHYS	0x70000000
+#define IO_APB_VIRT	IOMEM(0xFE000000)
+#define IO_APB_SIZE	SECTION_SIZE
+
+#define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
+#define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
+
+#define IO_TO_VIRT(n) ( \
+	IO_TO_VIRT_BETWEEN((n), IO_PPSB_PHYS, IO_PPSB_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_PPSB_PHYS, IO_PPSB_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_APB_PHYS, IO_APB_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) :	\
+	NULL)
+
+#define IO_ADDRESS(n) (IO_TO_VIRT(n))
+
+#endif
diff --git a/arch/arm/mach-tegra/irammap.h b/arch/arm/mach-tegra/irammap.h
new file mode 100644
index 000000000..a945a1c38
--- /dev/null
+++ b/arch/arm/mach-tegra/irammap.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#ifndef __MACH_TEGRA_IRAMMAP_H
+#define __MACH_TEGRA_IRAMMAP_H
+
+#include <linux/sizes.h>
+
+/* The first 1K of IRAM is permanently reserved for the CPU reset handler */
+#define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
+#define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
+
+/*
+ * This area is used for LPx resume vector, only while LPx power state is
+ * active. At other times, the AVP may use this area for arbitrary purposes
+ */
+#define TEGRA_IRAM_LPx_RESUME_AREA	(TEGRA_IRAM_BASE + SZ_4K)
+
+#endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
new file mode 100644
index 000000000..4e1ee70b2
--- /dev/null
+++ b/arch/arm/mach-tegra/irq.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *
+ * Copyright (C) 2010,2013, NVIDIA Corporation
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/syscore_ops.h>
+
+#include <soc/tegra/irq.h>
+
+#include "board.h"
+#include "iomap.h"
+
+#define SGI_MASK 0xFFFF
+
+#ifdef CONFIG_PM_SLEEP
+static void __iomem *tegra_gic_cpu_base;
+#endif
+
+bool tegra_pending_sgi(void)
+{
+	u32 pending_set;
+	void __iomem *distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
+
+	pending_set = readl_relaxed(distbase + GIC_DIST_PENDING_SET);
+
+	if (pending_set & SGI_MASK)
+		return true;
+
+	return false;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_gic_notifier(struct notifier_block *self,
+			      unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block tegra_gic_notifier_block = {
+	.notifier_call = tegra_gic_notifier,
+};
+
+static const struct of_device_id tegra114_dt_gic_match[] __initconst = {
+	{ .compatible = "arm,cortex-a15-gic" },
+	{ }
+};
+
+static void __init tegra114_gic_cpu_pm_registration(void)
+{
+	struct device_node *dn;
+
+	dn = of_find_matching_node(NULL, tegra114_dt_gic_match);
+	if (!dn)
+		return;
+
+	tegra_gic_cpu_base = of_iomap(dn, 1);
+
+	cpu_pm_register_notifier(&tegra_gic_notifier_block);
+}
+#else
+static void __init tegra114_gic_cpu_pm_registration(void) { }
+#endif
+
+static const struct of_device_id tegra_ictlr_match[] __initconst = {
+	{ .compatible = "nvidia,tegra20-ictlr" },
+	{ .compatible = "nvidia,tegra30-ictlr" },
+	{ }
+};
+
+void __init tegra_init_irq(void)
+{
+	if (WARN_ON(!of_find_matching_node(NULL, tegra_ictlr_match)))
+		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
+
+	tegra114_gic_cpu_pm_registration();
+}
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
new file mode 100644
index 000000000..1f57e7c0f
--- /dev/null
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-tegra/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ *  Copyright (C) 2009 Palm
+ *  All Rights Reserved
+ */
+
+#include <linux/clk/tegra.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/pmc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#include "common.h"
+#include "iomap.h"
+#include "reset.h"
+
+static cpumask_t tegra_cpu_init_mask;
+
+static void tegra_secondary_init(unsigned int cpu)
+{
+	cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
+}
+
+
+static int tegra20_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	cpu = cpu_logical_map(cpu);
+
+	/*
+	 * Force the CPU into reset. The CPU must remain in reset when
+	 * the flow controller state is cleared (which will cause the
+	 * flow controller to stop driving reset if the CPU has been
+	 * power-gated via the flow controller). This will have no
+	 * effect on first boot of the CPU since it should already be
+	 * in reset.
+	 */
+	tegra_put_cpu_in_reset(cpu);
+
+	/*
+	 * Unhalt the CPU. If the flow controller was used to
+	 * power-gate the CPU this will cause the flow controller to
+	 * stop driving reset. The CPU will remain in reset because the
+	 * clock and reset block is now driving reset.
+	 */
+	flowctrl_write_cpu_halt(cpu, 0);
+
+	tegra_enable_cpu_clock(cpu);
+	flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+	tegra_cpu_out_of_reset(cpu);
+	return 0;
+}
+
+static int tegra30_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret;
+	unsigned long timeout;
+
+	cpu = cpu_logical_map(cpu);
+	tegra_put_cpu_in_reset(cpu);
+	flowctrl_write_cpu_halt(cpu, 0);
+
+	/*
+	 * The power up sequence of cold boot CPU and warm boot CPU
+	 * was different.
+	 *
+	 * For warm boot CPU that was resumed from CPU hotplug, the
+	 * power will be resumed automatically after un-halting the
+	 * flow controller of the warm boot CPU. We need to wait for
+	 * the confirmation that the CPU is powered then removing
+	 * the IO clamps.
+	 * For cold boot CPU, do not wait. After the cold boot CPU be
+	 * booted, it will run to tegra_secondary_init() and set
+	 * tegra_cpu_init_mask which influences what tegra30_boot_secondary()
+	 * next time around.
+	 */
+	if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
+		timeout = jiffies + msecs_to_jiffies(50);
+		do {
+			if (tegra_pmc_cpu_is_powered(cpu))
+				goto remove_clamps;
+			udelay(10);
+		} while (time_before(jiffies, timeout));
+	}
+
+	/*
+	 * The power status of the cold boot CPU is power gated as
+	 * default. To power up the cold boot CPU, the power should
+	 * be un-gated by un-toggling the power gate register
+	 * manually.
+	 */
+	ret = tegra_pmc_cpu_power_on(cpu);
+	if (ret)
+		return ret;
+
+remove_clamps:
+	/* CPU partition is powered. Enable the CPU clock. */
+	tegra_enable_cpu_clock(cpu);
+	udelay(10);
+
+	/* Remove I/O clamps. */
+	ret = tegra_pmc_cpu_remove_clamping(cpu);
+	if (ret)
+		return ret;
+
+	udelay(10);
+
+	flowctrl_write_cpu_csr(cpu, 0); /* Clear flow controller CSR. */
+	tegra_cpu_out_of_reset(cpu);
+	return 0;
+}
+
+static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret = 0;
+
+	cpu = cpu_logical_map(cpu);
+
+	if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
+		/*
+		 * Warm boot flow
+		 * The flow controller in charge of the power state and
+		 * control for each CPU.
+		 */
+		/* set SCLK as event trigger for flow controller */
+		flowctrl_write_cpu_csr(cpu, 1);
+		flowctrl_write_cpu_halt(cpu,
+				FLOW_CTRL_WAITEVENT | FLOW_CTRL_SCLK_RESUME);
+	} else {
+		/*
+		 * Cold boot flow
+		 * The CPU is powered up by toggling PMC directly. It will
+		 * also initial power state in flow controller. After that,
+		 * the CPU's power state is maintained by flow controller.
+		 */
+		ret = tegra_pmc_cpu_power_on(cpu);
+	}
+
+	return ret;
+}
+
+static int tegra_boot_secondary(unsigned int cpu,
+					  struct task_struct *idle)
+{
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20)
+		return tegra20_boot_secondary(cpu, idle);
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_get_chip_id() == TEGRA30)
+		return tegra30_boot_secondary(cpu, idle);
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_get_chip_id() == TEGRA114)
+		return tegra114_boot_secondary(cpu, idle);
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124)
+		return tegra114_boot_secondary(cpu, idle);
+
+	return -EINVAL;
+}
+
+static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
+{
+	/* Always mark the boot CPU (CPU0) as initialized. */
+	cpumask_set_cpu(0, &tegra_cpu_init_mask);
+
+	if (scu_a9_has_base())
+		scu_enable(IO_ADDRESS(scu_a9_get_base()));
+}
+
+const struct smp_operations tegra_smp_ops __initconst = {
+	.smp_prepare_cpus	= tegra_smp_prepare_cpus,
+	.smp_secondary_init	= tegra_secondary_init,
+	.smp_boot_secondary	= tegra_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= tegra_cpu_kill,
+	.cpu_die		= tegra_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-tegra/pm-tegra20.c b/arch/arm/mach-tegra/pm-tegra20.c
new file mode 100644
index 000000000..1b4cab81a
--- /dev/null
+++ b/arch/arm/mach-tegra/pm-tegra20.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra20_iram_start, tegra20_iram_end;
+extern void tegra20_sleep_core_finish(unsigned long);
+
+void tegra20_lp1_iram_hook(void)
+{
+	tegra_lp1_iram.start_addr = &tegra20_iram_start;
+	tegra_lp1_iram.end_addr = &tegra20_iram_end;
+}
+
+void tegra20_sleep_core_init(void)
+{
+	tegra_sleep_core_finish = tegra20_sleep_core_finish;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c
new file mode 100644
index 000000000..e1b032953
--- /dev/null
+++ b/arch/arm/mach-tegra/pm-tegra30.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_PM_SLEEP
+extern u32 tegra30_iram_start, tegra30_iram_end;
+extern void tegra30_sleep_core_finish(unsigned long);
+
+void tegra30_lp1_iram_hook(void)
+{
+	tegra_lp1_iram.start_addr = &tegra30_iram_start;
+	tegra_lp1_iram.end_addr = &tegra30_iram_end;
+}
+
+void tegra30_sleep_core_init(void)
+{
+	tegra_sleep_core_finish = tegra30_sleep_core_finish;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
new file mode 100644
index 000000000..b21f51b8e
--- /dev/null
+++ b/arch/arm/mach-tegra/pm.c
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CPU complex suspend & resume functions for Tegra SoCs
+ *
+ * Copyright (c) 2009-2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/clk/tegra.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/suspend.h>
+
+#include <linux/firmware/trusted_foundations.h>
+
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/pm.h>
+#include <soc/tegra/pmc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/firmware.h>
+#include <asm/idmap.h>
+#include <asm/proc-fns.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+
+#include "iomap.h"
+#include "pm.h"
+#include "reset.h"
+#include "sleep.h"
+
+#ifdef CONFIG_PM_SLEEP
+static DEFINE_SPINLOCK(tegra_lp2_lock);
+static u32 iram_save_size;
+static void *iram_save_addr;
+struct tegra_lp1_iram tegra_lp1_iram;
+void (*tegra_tear_down_cpu)(void);
+void (*tegra_sleep_core_finish)(unsigned long v2p);
+static int (*tegra_sleep_func)(unsigned long v2p);
+
+static void tegra_tear_down_cpu_init(void)
+{
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra_tear_down_cpu = tegra20_tear_down_cpu;
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra_tear_down_cpu = tegra30_tear_down_cpu;
+		break;
+	}
+}
+
+/*
+ * restore_cpu_complex
+ *
+ * restores cpu clock setting, clears flow controller
+ *
+ * Always called on CPU 0.
+ */
+static void restore_cpu_complex(void)
+{
+	int cpu = smp_processor_id();
+
+	BUG_ON(cpu != 0);
+
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
+
+	/* Restore the CPU clock settings */
+	tegra_cpu_clock_resume();
+
+	flowctrl_cpu_suspend_exit(cpu);
+}
+
+/*
+ * suspend_cpu_complex
+ *
+ * saves pll state for use by restart_plls, prepares flow controller for
+ * transition to suspend state
+ *
+ * Must always be called on cpu 0.
+ */
+static void suspend_cpu_complex(void)
+{
+	int cpu = smp_processor_id();
+
+	BUG_ON(cpu != 0);
+
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
+
+	/* Save the CPU clock settings */
+	tegra_cpu_clock_suspend();
+
+	flowctrl_cpu_suspend_enter(cpu);
+}
+
+void tegra_pm_clear_cpu_in_lp2(void)
+{
+	int phy_cpu_id = cpu_logical_map(smp_processor_id());
+	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
+
+	spin_lock(&tegra_lp2_lock);
+
+	BUG_ON(!(*cpu_in_lp2 & BIT(phy_cpu_id)));
+	*cpu_in_lp2 &= ~BIT(phy_cpu_id);
+
+	spin_unlock(&tegra_lp2_lock);
+}
+
+void tegra_pm_set_cpu_in_lp2(void)
+{
+	int phy_cpu_id = cpu_logical_map(smp_processor_id());
+	u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
+
+	spin_lock(&tegra_lp2_lock);
+
+	BUG_ON((*cpu_in_lp2 & BIT(phy_cpu_id)));
+	*cpu_in_lp2 |= BIT(phy_cpu_id);
+
+	spin_unlock(&tegra_lp2_lock);
+}
+
+static int tegra_sleep_cpu(unsigned long v2p)
+{
+	if (tegra_cpu_car_ops->rail_off_ready &&
+	    WARN_ON(!tegra_cpu_rail_off_ready()))
+		return -EBUSY;
+
+	/*
+	 * L2 cache disabling using kernel API only allowed when all
+	 * secondary CPU's are offline. Cache have to be disabled with
+	 * MMU-on if cache maintenance is done via Trusted Foundations
+	 * firmware. Note that CPUIDLE won't ever enter powergate on Tegra30
+	 * if any of secondary CPU's is online and this is the LP2-idle
+	 * code-path only for Tegra20/30.
+	 */
+#ifdef CONFIG_OUTER_CACHE
+	if (trusted_foundations_registered() && outer_cache.disable)
+		outer_cache.disable();
+#endif
+	/*
+	 * Note that besides of setting up CPU reset vector this firmware
+	 * call may also do the following, depending on the FW version:
+	 *  1) Disable L2. But this doesn't matter since we already
+	 *     disabled the L2.
+	 *  2) Disable D-cache. This need to be taken into account in
+	 *     particular by the tegra_disable_clean_inv_dcache() which
+	 *     shall avoid the re-disable.
+	 */
+	call_firmware_op(prepare_idle, TF_PM_MODE_LP2);
+
+	setup_mm_for_reboot();
+	tegra_sleep_cpu_finish(v2p);
+
+	/* should never here */
+	BUG();
+
+	return 0;
+}
+
+static void tegra_pm_set(enum tegra_suspend_mode mode)
+{
+	u32 value;
+
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+	case TEGRA30:
+		break;
+	default:
+		/* Turn off CRAIL */
+		value = flowctrl_read_cpu_csr(0);
+		value &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK;
+		value |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL;
+		flowctrl_write_cpu_csr(0, value);
+		break;
+	}
+
+	tegra_pmc_enter_suspend_mode(mode);
+}
+
+int tegra_pm_enter_lp2(void)
+{
+	int err;
+
+	tegra_pm_set(TEGRA_SUSPEND_LP2);
+
+	cpu_cluster_pm_enter();
+	suspend_cpu_complex();
+
+	err = cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
+
+	/*
+	 * Resume L2 cache if it wasn't re-enabled early during resume,
+	 * which is the case for Tegra30 that has to re-enable the cache
+	 * via firmware call. In other cases cache is already enabled and
+	 * hence re-enabling is a no-op. This is always a no-op on Tegra114+.
+	 */
+	outer_resume();
+
+	restore_cpu_complex();
+	cpu_cluster_pm_exit();
+
+	call_firmware_op(prepare_idle, TF_PM_MODE_NONE);
+
+	return err;
+}
+
+enum tegra_suspend_mode tegra_pm_validate_suspend_mode(
+				enum tegra_suspend_mode mode)
+{
+	/*
+	 * The Tegra devices support suspending to LP1 or lower currently.
+	 */
+	if (mode > TEGRA_SUSPEND_LP1)
+		return TEGRA_SUSPEND_LP1;
+
+	return mode;
+}
+
+static int tegra_sleep_core(unsigned long v2p)
+{
+	/*
+	 * Cache have to be disabled with MMU-on if cache maintenance is done
+	 * via Trusted Foundations firmware. This is a no-op on Tegra114+.
+	 */
+	if (trusted_foundations_registered())
+		outer_disable();
+
+	call_firmware_op(prepare_idle, TF_PM_MODE_LP1);
+
+	setup_mm_for_reboot();
+	tegra_sleep_core_finish(v2p);
+
+	/* should never here */
+	BUG();
+
+	return 0;
+}
+
+/*
+ * tegra_lp1_iram_hook
+ *
+ * Hooking the address of LP1 reset vector and SDRAM self-refresh code in
+ * SDRAM. These codes not be copied to IRAM in this fuction. We need to
+ * copy these code to IRAM before LP0/LP1 suspend and restore the content
+ * of IRAM after resume.
+ */
+static bool tegra_lp1_iram_hook(void)
+{
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_lp1_iram_hook();
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra30_lp1_iram_hook();
+		break;
+	default:
+		break;
+	}
+
+	if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr)
+		return false;
+
+	iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr;
+	iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL);
+	if (!iram_save_addr)
+		return false;
+
+	return true;
+}
+
+static bool tegra_sleep_core_init(void)
+{
+	switch (tegra_get_chip_id()) {
+	case TEGRA20:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
+			tegra20_sleep_core_init();
+		break;
+	case TEGRA30:
+	case TEGRA114:
+	case TEGRA124:
+		if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) ||
+		    IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC))
+			tegra30_sleep_core_init();
+		break;
+	default:
+		break;
+	}
+
+	if (!tegra_sleep_core_finish)
+		return false;
+
+	return true;
+}
+
+static void tegra_suspend_enter_lp1(void)
+{
+	/* copy the reset vector & SDRAM shutdown code into IRAM */
+	memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		iram_save_size);
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA),
+		tegra_lp1_iram.start_addr, iram_save_size);
+
+	*((u32 *)tegra_cpu_lp1_mask) = 1;
+}
+
+static void tegra_suspend_exit_lp1(void)
+{
+	/* restore IRAM */
+	memcpy(IO_ADDRESS(TEGRA_IRAM_LPx_RESUME_AREA), iram_save_addr,
+		iram_save_size);
+
+	*(u32 *)tegra_cpu_lp1_mask = 0;
+}
+
+static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = {
+	[TEGRA_SUSPEND_NONE] = "none",
+	[TEGRA_SUSPEND_LP2] = "LP2",
+	[TEGRA_SUSPEND_LP1] = "LP1",
+	[TEGRA_SUSPEND_LP0] = "LP0",
+};
+
+static int tegra_suspend_enter(suspend_state_t state)
+{
+	enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+	if (WARN_ON(mode < TEGRA_SUSPEND_NONE ||
+		    mode >= TEGRA_MAX_SUSPEND_MODE))
+		return -EINVAL;
+
+	pr_info("Entering suspend state %s\n", lp_state[mode]);
+
+	tegra_pm_set(mode);
+
+	local_fiq_disable();
+
+	suspend_cpu_complex();
+	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_suspend_enter_lp1();
+		break;
+	case TEGRA_SUSPEND_LP2:
+		tegra_pm_set_cpu_in_lp2();
+		break;
+	default:
+		break;
+	}
+
+	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func);
+
+	/*
+	 * Resume L2 cache if it wasn't re-enabled early during resume,
+	 * which is the case for Tegra30 that has to re-enable the cache
+	 * via firmware call. In other cases cache is already enabled and
+	 * hence re-enabling is a no-op.
+	 */
+	outer_resume();
+
+	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_suspend_exit_lp1();
+		break;
+	case TEGRA_SUSPEND_LP2:
+		tegra_pm_clear_cpu_in_lp2();
+		break;
+	default:
+		break;
+	}
+	restore_cpu_complex();
+
+	local_fiq_enable();
+
+	call_firmware_op(prepare_idle, TF_PM_MODE_NONE);
+
+	return 0;
+}
+
+static const struct platform_suspend_ops tegra_suspend_ops = {
+	.valid		= suspend_valid_only_mem,
+	.enter		= tegra_suspend_enter,
+};
+
+void tegra_pm_init_suspend(void)
+{
+	enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode();
+
+	if (mode == TEGRA_SUSPEND_NONE)
+		return;
+
+	tegra_tear_down_cpu_init();
+
+	if (mode >= TEGRA_SUSPEND_LP1) {
+		if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) {
+			pr_err("%s: unable to allocate memory for SDRAM"
+			       "self-refresh -- LP0/LP1 unavailable\n",
+			       __func__);
+			tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2);
+			mode = TEGRA_SUSPEND_LP2;
+		}
+	}
+
+	/* set up sleep function for cpu_suspend */
+	switch (mode) {
+	case TEGRA_SUSPEND_LP1:
+		tegra_sleep_func = tegra_sleep_core;
+		break;
+	case TEGRA_SUSPEND_LP2:
+		tegra_sleep_func = tegra_sleep_cpu;
+		break;
+	default:
+		break;
+	}
+
+	suspend_set_ops(&tegra_suspend_ops);
+}
+
+int tegra_pm_park_secondary_cpu(unsigned long cpu)
+{
+	if (cpu > 0) {
+		tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
+
+		if (tegra_get_chip_id() == TEGRA20)
+			tegra20_hotplug_shutdown();
+		else
+			tegra30_hotplug_shutdown();
+	}
+
+	return -EINVAL;
+}
+#endif
diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h
new file mode 100644
index 000000000..e63f96de2
--- /dev/null
+++ b/arch/arm/mach-tegra/pm.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2010-2012 NVIDIA Corporation. All rights reserved.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ */
+
+#ifndef _MACH_TEGRA_PM_H_
+#define _MACH_TEGRA_PM_H_
+
+struct tegra_lp1_iram {
+	void	*start_addr;
+	void	*end_addr;
+};
+
+extern struct tegra_lp1_iram tegra_lp1_iram;
+extern void (*tegra_sleep_core_finish)(unsigned long v2p);
+
+void tegra20_lp1_iram_hook(void);
+void tegra20_sleep_core_init(void);
+void tegra30_lp1_iram_hook(void);
+void tegra30_sleep_core_init(void);
+
+extern void (*tegra_tear_down_cpu)(void);
+
+#endif /* _MACH_TEGRA_PM_H_ */
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
new file mode 100644
index 000000000..0ea456264
--- /dev/null
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -0,0 +1,303 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+#include "iomap.h"
+#include "reset.h"
+#include "sleep.h"
+
+#define PMC_SCRATCH41	0x140
+
+.arch armv7-a
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ *	tegra_resume
+ *
+ *	  CPU boot vector when restarting the a CPU following
+ *	  an LP2 transition. Also branched to by LP0 and LP1 resume after
+ *	  re-enabling sdram.
+ *
+ *	r6: SoC ID
+ *	r8: CPU part number
+ */
+ENTRY(tegra_resume)
+	check_cpu_part_num 0xc09, r8, r9
+	bleq	v7_invalidate_l1
+
+	cpu_id	r0
+	cmp	r0, #0				@ CPU0?
+ THUMB(	it	ne )
+	bne	cpu_resume			@ no
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
+	/* Are we on Tegra20? */
+	cmp	r6, #TEGRA20
+	beq	1f				@ Yes
+	/* Clear the flow controller flags for this CPU. */
+	cpu_to_csr_reg r3, r0
+	mov32	r2, TEGRA_FLOW_CTRL_BASE
+	ldr	r1, [r2, r3]
+	/* Clear event & intr flag */
+	orr	r1, r1, \
+		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	movw	r0, #0x3FFD	@ enable, cluster_switch, immed, bitmaps
+				@ & ext flags for CPU power mgnt
+	bic	r1, r1, r0
+	str	r1, [r2, r3]
+1:
+
+	mov32	r9, 0xc09
+	cmp	r8, r9
+	bne	end_ca9_scu_l2_resume
+#ifdef CONFIG_HAVE_ARM_SCU
+	/* enable SCU */
+	mov32	r0, TEGRA_ARM_PERIF_BASE
+	ldr	r1, [r0]
+	orr	r1, r1, #1
+	str	r1, [r0]
+#endif
+	bl	tegra_resume_trusted_foundations
+
+#ifdef CONFIG_CACHE_L2X0
+	/* L2 cache resume & re-enable */
+	bl	l2c310_early_resume
+#endif
+end_ca9_scu_l2_resume:
+	mov32	r9, 0xc0f
+	cmp	r8, r9
+	bleq	tegra_init_l2_for_a15
+
+	b	cpu_resume
+ENDPROC(tegra_resume)
+
+/*
+ *	tegra_resume_trusted_foundations
+ *
+ *	  Trusted Foundations firmware initialization.
+ *
+ *	Doesn't return if firmware presents.
+ *	Corrupted registers: r1, r2
+ */
+ENTRY(tegra_resume_trusted_foundations)
+	/* Check whether Trusted Foundations firmware presents. */
+	mov32	r2, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
+	ldr	r1, =__tegra_cpu_reset_handler_data_offset + \
+							RESET_DATA(TF_PRESENT)
+	ldr	r1, [r2, r1]
+	cmp	r1, #0
+	reteq	lr
+
+ .arch_extension sec
+	/*
+	 * First call after suspend wakes firmware. No arguments required
+	 * for some firmware versions. Downstream kernel of ASUS TF300T uses
+	 * r0=3 for the wake-up notification.
+	 */
+	mov	r0, #3
+	smc	#0
+
+	b	cpu_resume
+ENDPROC(tegra_resume_trusted_foundations)
+#endif
+
+	.align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler_start)
+
+/*
+ * __tegra_cpu_reset_handler:
+ *
+ * Common handler for all CPU reset events.
+ *
+ * Register usage within the reset handler:
+ *
+ *      Others: scratch
+ *      R6  = SoC ID
+ *      R7  = CPU present (to the OS) mask
+ *      R8  = CPU in LP1 state mask
+ *      R9  = CPU in LP2 state mask
+ *      R10 = CPU number
+ *      R11 = CPU mask
+ *      R12 = pointer to reset handler data
+ *
+ * NOTE: This code is copied to IRAM. All code and data accesses
+ *       must be position-independent.
+ */
+
+	.arm
+	.align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler)
+
+	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
+
+	adr	r12, __tegra_cpu_reset_handler_data
+	ldr	r5, [r12, #RESET_DATA(TF_PRESENT)]
+	cmp	r5, #0
+	bne	after_errata
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+t20_check:
+	cmp	r6, #TEGRA20
+	bne	after_t20_check
+t20_errata:
+	# Tegra20 is a Cortex-A9 r1p1
+	mrc	p15, 0, r0, c1, c0, 0   @ read system control register
+	orr	r0, r0, #1 << 14        @ erratum 716044
+	mcr	p15, 0, r0, c1, c0, 0   @ write system control register
+	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
+	orr	r0, r0, #1 << 4         @ erratum 742230
+	orr	r0, r0, #1 << 11        @ erratum 751472
+	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
+	b	after_errata
+after_t20_check:
+#endif
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+t30_check:
+	cmp	r6, #TEGRA30
+	bne	after_t30_check
+t30_errata:
+	# Tegra30 is a Cortex-A9 r2p9
+	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
+	orr	r0, r0, #1 << 6         @ erratum 743622
+	orr	r0, r0, #1 << 11        @ erratum 751472
+	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
+	b	after_errata
+after_t30_check:
+#endif
+after_errata:
+	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
+	and	r10, r10, #0x3			@ R10 = CPU number
+	mov	r11, #1
+	mov	r11, r11, lsl r10  		@ R11 = CPU mask
+
+#ifdef CONFIG_SMP
+	/* Does the OS know about this CPU? */
+	ldr	r7, [r12, #RESET_DATA(MASK_PRESENT)]
+	tst	r7, r11 			@ if !present
+	bleq	__die				@ CPU not present (to OS)
+#endif
+
+	/* Waking up from LP1? */
+	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
+	tst	r8, r11				@ if in_lp1
+	beq	__is_not_lp1
+	cmp	r10, #0
+	bne	__die				@ only CPU0 can be here
+	ldr	lr, [r12, #RESET_DATA(STARTUP_LP1)]
+	cmp	lr, #0
+	bleq	__die				@ no LP1 startup handler
+ THUMB(	add	lr, lr, #1 )			@ switch to Thumb mode
+	bx	lr
+__is_not_lp1:
+
+	/* Waking up from LP2? */
+	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
+	tst	r9, r11				@ if in_lp2
+	beq	__is_not_lp2
+	ldr	lr, [r12, #RESET_DATA(STARTUP_LP2)]
+	cmp	lr, #0
+	bleq	__die				@ no LP2 startup handler
+	bx	lr
+
+__is_not_lp2:
+
+#ifdef CONFIG_SMP
+	/*
+	 * Can only be secondary boot (initial or hotplug)
+	 * CPU0 can't be here for Tegra20/30
+	 */
+	cmp	r6, #TEGRA114
+	beq	__no_cpu0_chk
+	cmp	r10, #0
+	bleq	__die				@ CPU0 cannot be here
+__no_cpu0_chk:
+	ldr	lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
+	cmp	lr, #0
+	bleq	__die				@ no secondary startup handler
+	bx	lr
+#endif
+
+/*
+ * We don't know why the CPU reset. Just kill it.
+ * The LR register will contain the address we died at + 4.
+ */
+
+__die:
+	sub	lr, lr, #4
+	mov32	r7, TEGRA_PMC_BASE
+	str	lr, [r7, #PMC_SCRATCH41]
+
+	mov32	r7, TEGRA_CLK_RESET_BASE
+
+	/* Are we on Tegra20? */
+	cmp	r6, #TEGRA20
+	bne	1f
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+	mov32	r0, 0x1111
+	mov	r1, r0, lsl r10
+	str	r1, [r7, #0x340]		@ CLK_RST_CPU_CMPLX_SET
+#endif
+1:
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+
+	cmp	r10, #0
+	moveq	r1, #FLOW_CTRL_HALT_CPU0_EVENTS
+	moveq	r2, #FLOW_CTRL_CPU0_CSR
+	movne	r1, r10, lsl #3
+	addne	r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
+	addne	r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
+
+	/* Clear CPU "event" and "interrupt" flags and power gate
+	   it when halting but not before it is in the "WFI" state. */
+	ldr	r0, [r6, +r2]
+	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
+	str	r0, [r6, +r2]
+
+	/* Unconditionally halt this CPU */
+	mov	r0, #FLOW_CTRL_WAITEVENT
+	str	r0, [r6, +r1]
+	ldr	r0, [r6, +r1]			@ memory barrier
+
+	dsb
+	isb
+	wfi					@ CPU should be power gated here
+
+	/* If the CPU didn't power gate above just kill it's clock. */
+
+	mov	r0, r11, lsl #8
+	str	r0, [r7, #348]			@ CLK_CPU_CMPLX_SET
+#endif
+
+	/* If the CPU still isn't dead, just spin here. */
+	b	.
+ENDPROC(__tegra_cpu_reset_handler)
+
+	.align L1_CACHE_SHIFT
+	.type	__tegra_cpu_reset_handler_data, %object
+	.globl	__tegra_cpu_reset_handler_data
+	.globl	__tegra_cpu_reset_handler_data_offset
+	.equ	__tegra_cpu_reset_handler_data_offset, \
+					. - __tegra_cpu_reset_handler_start
+__tegra_cpu_reset_handler_data:
+	.rept   TEGRA_RESET_DATA_SIZE
+	.long   0
+	.endr
+	.align L1_CACHE_SHIFT
+
+ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
new file mode 100644
index 000000000..d5c805adf
--- /dev/null
+++ b/arch/arm/mach-tegra/reset.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-tegra/reset.c
+ *
+ * Copyright (C) 2011,2012 NVIDIA Corporation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <linux/firmware/trusted_foundations.h>
+
+#include <soc/tegra/fuse.h>
+
+#include <asm/cacheflush.h>
+#include <asm/firmware.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "iomap.h"
+#include "irammap.h"
+#include "reset.h"
+#include "sleep.h"
+
+#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \
+				TEGRA_IRAM_RESET_HANDLER_OFFSET)
+
+static bool is_enabled;
+
+static void __init tegra_cpu_reset_handler_set(const u32 reset_address)
+{
+	void __iomem *evp_cpu_reset =
+		IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100);
+	void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE);
+	u32 reg;
+
+	/*
+	 * NOTE: This must be the one and only write to the EVP CPU reset
+	 *       vector in the entire system.
+	 */
+	writel(reset_address, evp_cpu_reset);
+	wmb();
+	reg = readl(evp_cpu_reset);
+
+	/*
+	 * Prevent further modifications to the physical reset vector.
+	 *  NOTE: Has no effect on chips prior to Tegra30.
+	 */
+	reg = readl(sb_ctrl);
+	reg |= 2;
+	writel(reg, sb_ctrl);
+	wmb();
+}
+
+static void __init tegra_cpu_reset_handler_enable(void)
+{
+	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
+	const u32 reset_address = TEGRA_IRAM_RESET_BASE +
+						tegra_cpu_reset_handler_offset;
+	int err;
+
+	BUG_ON(is_enabled);
+	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
+
+	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
+			tegra_cpu_reset_handler_size);
+
+	err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);
+	switch (err) {
+	case -ENOSYS:
+		tegra_cpu_reset_handler_set(reset_address);
+		fallthrough;
+	case 0:
+		is_enabled = true;
+		break;
+	default:
+		pr_crit("Cannot set CPU reset handler: %d\n", err);
+		BUG();
+	}
+}
+
+void __init tegra_cpu_reset_handler_init(void)
+{
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_TF_PRESENT] =
+		trusted_foundations_registered();
+
+#ifdef CONFIG_SMP
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
+		*((u32 *)cpu_possible_mask);
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
+		__pa_symbol((void *)secondary_startup);
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] =
+		TEGRA_IRAM_LPx_RESUME_AREA;
+	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] =
+		__pa_symbol((void *)tegra_resume);
+#endif
+
+	tegra_cpu_reset_handler_enable();
+}
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
new file mode 100644
index 000000000..51265592c
--- /dev/null
+++ b/arch/arm/mach-tegra/reset.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/mach-tegra/reset.h
+ *
+ * CPU reset dispatcher.
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ */
+
+#ifndef __MACH_TEGRA_RESET_H
+#define __MACH_TEGRA_RESET_H
+
+#define TEGRA_RESET_MASK_PRESENT	0
+#define TEGRA_RESET_MASK_LP1		1
+#define TEGRA_RESET_MASK_LP2		2
+#define TEGRA_RESET_STARTUP_SECONDARY	3
+#define TEGRA_RESET_STARTUP_LP2		4
+#define TEGRA_RESET_STARTUP_LP1		5
+#define TEGRA_RESET_TF_PRESENT		6
+#define TEGRA_RESET_DATA_SIZE		7
+
+#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
+
+#ifndef __ASSEMBLY__
+
+#include "irammap.h"
+
+extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE];
+
+void __tegra_cpu_reset_handler_start(void);
+void __tegra_cpu_reset_handler(void);
+void __tegra20_cpu1_resettable_status_offset(void);
+void __tegra_cpu_reset_handler_end(void);
+
+#ifdef CONFIG_PM_SLEEP
+#define tegra_cpu_lp1_mask \
+	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP1] - \
+	 (u32)__tegra_cpu_reset_handler_start)))
+#define tegra_cpu_lp2_mask \
+	(IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \
+	((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \
+	 (u32)__tegra_cpu_reset_handler_start)))
+#endif
+
+#define tegra_cpu_reset_handler_offset \
+		((u32)__tegra_cpu_reset_handler - \
+		 (u32)__tegra_cpu_reset_handler_start)
+
+#define tegra_cpu_reset_handler_size \
+		(__tegra_cpu_reset_handler_end - \
+		 __tegra_cpu_reset_handler_start)
+
+void __init tegra_cpu_reset_handler_init(void);
+
+#endif
+#endif
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
new file mode 100644
index 000000000..d8cd487a8
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -0,0 +1,437 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ */
+
+#include <linux/linkage.h>
+
+#include <soc/tegra/flowctrl.h>
+
+#include <asm/assembler.h>
+#include <asm/proc-fns.h>
+#include <asm/cp15.h>
+#include <asm/cache.h>
+
+#include "irammap.h"
+#include "reset.h"
+#include "sleep.h"
+
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_EMC_STATUS			0x2b4
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLP_BASE		0xa0
+
+#define APB_MISC_XM2CFGCPADCTRL		0x8c8
+#define APB_MISC_XM2CFGDPADCTRL		0x8cc
+#define APB_MISC_XM2CLKCFGPADCTRL	0x8d0
+#define APB_MISC_XM2COMPPADCTRL		0x8d4
+#define APB_MISC_XM2VTTGENPADCTRL	0x8d8
+#define APB_MISC_XM2CFGCPADCTRL2	0x8e4
+#define APB_MISC_XM2CFGDPADCTRL2	0x8e8
+
+#define PLLC_STORE_MASK			(1 << 0)
+#define PLLM_STORE_MASK			(1 << 1)
+#define PLLP_STORE_MASK			(1 << 2)
+
+.arch armv7-a
+
+.macro test_pll_state, rd, test_mask
+	ldr	\rd, tegra_pll_state
+	tst	\rd, #\test_mask
+.endm
+
+.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #\pll_mask
+	orrne	\rd, \rd, #\pll_mask
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, test_mask
+	test_pll_state \rd, \test_mask
+	beq	1f
+
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+1:
+.endm
+
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #(0x3 << 24)
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra20_hotplug_shutdown(void)
+ *
+ * puts the current cpu in reset
+ * should never return
+ */
+ENTRY(tegra20_hotplug_shutdown)
+	/* Put this CPU down */
+	cpu_id	r0
+	bl	tegra20_cpu_shutdown
+	ret	lr			@ should never get here
+ENDPROC(tegra20_hotplug_shutdown)
+
+/*
+ * tegra20_cpu_shutdown(int cpu)
+ *
+ * r0 is cpu to reset
+ *
+ * puts the specified CPU in wait-for-event mode on the flow controller
+ * and puts the CPU in reset
+ * can be called on the current cpu or another cpu
+ * if called on the current cpu, does not return
+ * MUST NOT BE CALLED FOR CPU 0.
+ *
+ * corrupts r0-r3, r12
+ */
+ENTRY(tegra20_cpu_shutdown)
+	cmp	r0, #0
+	reteq	lr			@ must not be called for CPU 0
+
+	cpu_to_halt_reg r1, r0
+	ldr	r3, =TEGRA_FLOW_CTRL_VIRT
+	mov	r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME
+	str	r2, [r3, r1]		@ put flow controller in wait event mode
+	ldr	r2, [r3, r1]
+	isb
+	dsb
+	movw	r1, 0x1011
+	mov	r1, r1, lsl r0
+	ldr	r3, =TEGRA_CLK_RESET_VIRT
+	str	r1, [r3, #0x340]	@ put slave CPU in reset
+	isb
+	dsb
+	cpu_id	r3
+	cmp	r3, r0
+	beq	.
+	ret	lr
+ENDPROC(tegra20_cpu_shutdown)
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * tegra20_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to
+ * tegra20_tear_down_core in IRAM
+ */
+ENTRY(tegra20_sleep_core_finish)
+	mov     r4, r0
+	/* Flush, disable the L1 data cache and exit SMP */
+	mov     r0, #TEGRA_FLUSH_CACHE_ALL
+	bl	tegra_disable_clean_inv_dcache
+	mov     r0, r4
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra20_tear_down_core
+	mov32	r1, tegra20_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	ret	r3
+ENDPROC(tegra20_sleep_core_finish)
+
+/*
+ * tegra20_tear_down_cpu
+ *
+ * Switches the CPU cluster to PLL-P and enters sleep.
+ */
+ENTRY(tegra20_tear_down_cpu)
+	bl	tegra_switch_cpu_to_pllp
+	b	tegra20_enter_sleep
+ENDPROC(tegra20_tear_down_cpu)
+
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra20_iram_start
+tegra20_iram_start:
+
+/*
+ * tegra20_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing and PLLX.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra20_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLM, PLLP, PLLC.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+
+	adr	r2, tegra20_sdram_pad_address
+	adr	r4, tegra20_sdram_pad_save
+	mov	r5, #0
+
+	ldr	r6, tegra20_sdram_pad_size
+padload:
+	ldr	r7, [r2, r5]		@ r7 is the addr in the pad_address
+
+	ldr	r1, [r4, r5]
+	str	r1, [r7]		@ restore the value in pad_save
+
+	add	r5, r5, #4
+	cmp	r6, r5
+	bne	padload
+
+padload_done:
+	/* 255uS delay for PLL stabilization */
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #0xff
+	wait_until r1, r7, r9
+
+	adr	r4, tegra20_sclk_save
+	ldr	r4, [r4]
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+	mov32	r4, ((1 << 28) | (4))	@ burst policy is PLLP
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	mov32	r0, TEGRA_EMC_BASE
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	str	r1, [r0, #EMC_NOP]
+	str	r1, [r0, #EMC_NOP]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	ret	r0			@ jump to tegra_resume
+ENDPROC(tegra20_lp1_reset)
+
+/*
+ * tegra20_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra20_tear_down_core:
+	bl	tegra20_sdram_self_refresh
+	bl	tegra20_switch_cpu_to_clk32k
+	b	tegra20_enter_sleep
+
+/*
+ * tegra20_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock
+ * to the 32KHz clock.
+ */
+tegra20_switch_cpu_to_clk32k:
+	/*
+	 * start by switching to CLKM to safely disable PLLs, then switch to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+
+	/* disable PLLM, PLLP and PLLC */
+	ldr	r0, [r5, #CLK_RESET_PLLM_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLM_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+
+	/* switch to CLKS */
+	mov	r0, #0	/* brust policy = 32KHz */
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	ret	lr
+
+/*
+ * tegra20_enter_sleep
+ *
+ * uses flow controller to enter sleep state
+ * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
+ * executes from SDRAM with target state is LP2
+ */
+tegra20_enter_sleep:
+	mov32   r6, TEGRA_FLOW_CTRL_BASE
+
+	mov     r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
+	orr	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	cpu_id	r1
+	cpu_to_halt_reg r1, r1
+	str	r0, [r6, r1]
+	dsb
+	ldr	r0, [r6, r1] /* memory barrier */
+
+halted:
+	dsb
+	wfe	/* CPU should be power gated here */
+	isb
+	b	halted
+
+/*
+ * tegra20_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * puts sdram in self refresh
+ * must be executed from IRAM
+ */
+tegra20_sdram_self_refresh:
+	mov32	r1, TEGRA_EMC_BASE	@ r1 reserved for emc base addr
+
+	mov	r2, #3
+	str	r2, [r1, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r2, [r1, #EMC_EMC_STATUS]
+	tst	r2, #4
+	beq	emcidle
+
+	mov	r2, #1
+	str	r2, [r1, #EMC_SELF_REF]
+
+	emc_device_mask r2, r1
+
+emcself:
+	ldr	r3, [r1, #EMC_EMC_STATUS]
+	and	r3, r3, r2
+	cmp	r3, r2
+	bne	emcself			@ loop until DDR in self-refresh
+
+	adr	r2, tegra20_sdram_pad_address
+	adr	r3, tegra20_sdram_pad_safe
+	adr	r4, tegra20_sdram_pad_save
+	mov	r5, #0
+
+	ldr	r6, tegra20_sdram_pad_size
+padsave:
+	ldr	r0, [r2, r5]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r4, r5]		@ save the content of the addr
+
+	ldr	r1, [r3, r5]
+	str	r1, [r0]		@ set the save val to the addr
+
+	add	r5, r5, #4
+	cmp	r6, r5
+	bne	padsave
+padsave_done:
+
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	ldr	r0, [r5, #CLK_RESET_SCLK_BURST]
+	adr	r2, tegra20_sclk_save
+	str	r0, [r2]
+	dsb
+	ret	lr
+
+tegra20_sdram_pad_address:
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2
+	.word	TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2
+
+tegra20_sdram_pad_size:
+	.word	tegra20_sdram_pad_size - tegra20_sdram_pad_address
+
+tegra20_sdram_pad_safe:
+	.word	0x8
+	.word	0x8
+	.word	0x0
+	.word	0x8
+	.word	0x5500
+	.word	0x08080040
+	.word	0x0
+
+tegra20_sclk_save:
+	.word	0x0
+
+tegra20_sdram_pad_save:
+	.rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+tegra_pll_state:
+	.word	0x0
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra20_iram_end
+tegra20_iram_end:
+	b	.
+#endif
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
new file mode 100644
index 000000000..134ea5fe4
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -0,0 +1,909 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/linkage.h>
+
+#include <soc/tegra/flowctrl.h>
+#include <soc/tegra/fuse.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+#include "irammap.h"
+#include "sleep.h"
+
+#define EMC_CFG				0xc
+#define EMC_ADR_CFG			0x10
+#define EMC_TIMING_CONTROL		0x28
+#define EMC_NOP				0xdc
+#define EMC_SELF_REF			0xe0
+#define EMC_MRW				0xe8
+#define EMC_FBIO_CFG5			0x104
+#define EMC_AUTO_CAL_CONFIG		0x2a4
+#define EMC_AUTO_CAL_INTERVAL		0x2a8
+#define EMC_AUTO_CAL_STATUS		0x2ac
+#define EMC_REQ_CTRL			0x2b0
+#define EMC_CFG_DIG_DLL			0x2bc
+#define EMC_EMC_STATUS			0x2b4
+#define EMC_ZCAL_INTERVAL		0x2e0
+#define EMC_ZQ_CAL			0x2ec
+#define EMC_XM2VTTGENPADCTRL		0x310
+#define EMC_XM2VTTGENPADCTRL2		0x314
+
+#define PMC_CTRL			0x0
+#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
+
+#define PMC_PLLP_WB0_OVERRIDE		0xf8
+#define PMC_IO_DPD_REQ			0x1b8
+#define PMC_IO_DPD_STATUS		0x1bc
+
+#define CLK_RESET_CCLK_BURST		0x20
+#define CLK_RESET_CCLK_DIVIDER		0x24
+#define CLK_RESET_SCLK_BURST		0x28
+#define CLK_RESET_SCLK_DIVIDER		0x2c
+
+#define CLK_RESET_PLLC_BASE		0x80
+#define CLK_RESET_PLLC_MISC		0x8c
+#define CLK_RESET_PLLM_BASE		0x90
+#define CLK_RESET_PLLM_MISC		0x9c
+#define CLK_RESET_PLLP_BASE		0xa0
+#define CLK_RESET_PLLP_MISC		0xac
+#define CLK_RESET_PLLA_BASE		0xb0
+#define CLK_RESET_PLLA_MISC		0xbc
+#define CLK_RESET_PLLX_BASE		0xe0
+#define CLK_RESET_PLLX_MISC		0xe4
+#define CLK_RESET_PLLX_MISC3		0x518
+#define CLK_RESET_PLLX_MISC3_IDDQ	3
+#define CLK_RESET_PLLM_MISC_IDDQ	5
+#define CLK_RESET_PLLC_MISC_IDDQ	26
+#define CLK_RESET_PLLP_RESHIFT		0x528
+#define CLK_RESET_PLLP_RESHIFT_DEFAULT	0x3b
+#define CLK_RESET_PLLP_RESHIFT_ENABLE	0x3
+
+#define CLK_RESET_CLK_SOURCE_MSELECT	0x3b4
+
+#define MSELECT_CLKM			(0x3 << 30)
+
+#define LOCK_DELAY 50 /* safety delay after lock is detected */
+
+#define TEGRA30_POWER_HOTPLUG_SHUTDOWN	(1 << 27) /* Hotplug shutdown */
+
+#define PLLA_STORE_MASK			(1 << 0)
+#define PLLC_STORE_MASK			(1 << 1)
+#define PLLM_STORE_MASK			(1 << 2)
+#define PLLP_STORE_MASK			(1 << 3)
+#define PLLX_STORE_MASK			(1 << 4)
+#define PLLM_PMC_STORE_MASK		(1 << 5)
+
+.arch armv7-a
+
+.macro emc_device_mask, rd, base
+	ldr	\rd, [\base, #EMC_ADR_CFG]
+	tst	\rd, #0x1
+	moveq	\rd, #(0x1 << 8)		@ just 1 device
+	movne	\rd, #(0x3 << 8)		@ 2 devices
+.endm
+
+.macro emc_timing_update, rd, base
+	mov	\rd, #1
+	str	\rd, [\base, #EMC_TIMING_CONTROL]
+1001:
+	ldr	\rd, [\base, #EMC_EMC_STATUS]
+	tst	\rd, #(0x1<<23)	@ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear
+	bne	1001b
+.endm
+
+.macro test_pll_state, rd, test_mask
+	ldr	\rd, tegra_pll_state
+	tst	\rd, #\test_mask
+.endm
+
+.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #\pll_mask
+	orrne	\rd, \rd, #\pll_mask
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro store_pllm_pmc_state, rd, tmp, pmc_base
+	ldr	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+	tst	\rd, #(1 << 12)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #PLLM_PMC_STORE_MASK
+	orrne	\rd, \rd, #PLLM_PMC_STORE_MASK
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro pllm_pmc_enable, rd, pmc_base
+	test_pll_state \rd, PLLM_PMC_STORE_MASK
+
+	ldrne	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+	orrne	\rd, \rd, #(1 << 12)
+	strne	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc, test_mask
+	test_pll_state \rd, \test_mask
+	beq	1f
+
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	orreq	\rd, \rd, #(1 << 30)
+	streq	\rd, [\r_car_base, #\pll_base]
+	/* Enable lock detector */
+	.if	\pll_misc
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	bic	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	ldr	\rd, [\r_car_base, #\pll_misc]
+	orr	\rd, \rd, #(1 << 18)
+	str	\rd, [\r_car_base, #\pll_misc]
+	.endif
+1:
+.endm
+
+.macro pll_locked, rd, r_car_base, pll_base, test_mask
+	test_pll_state \rd, \test_mask
+	beq	2f
+1:
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 27)
+	beq	1b
+2:
+.endm
+
+.macro pll_iddq_exit, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	bic	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
+.macro pll_iddq_entry, rd, car, iddq, iddq_bit
+	ldr	\rd, [\car, #\iddq]
+	orr	\rd, \rd, #(1<<\iddq_bit)
+	str	\rd, [\car, #\iddq]
+.endm
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra30_hotplug_shutdown(void)
+ *
+ * Powergates the current CPU.
+ * Should never return.
+ */
+ENTRY(tegra30_hotplug_shutdown)
+	/* Powergate this CPU */
+	mov	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+	bl	tegra30_cpu_shutdown
+	ret	lr			@ should never get here
+ENDPROC(tegra30_hotplug_shutdown)
+
+/*
+ * tegra30_cpu_shutdown(unsigned long flags)
+ *
+ * Puts the current CPU in wait-for-event mode on the flow controller
+ * and powergates it -- flags (in R0) indicate the request type.
+ *
+ * r10 = SoC ID
+ * corrupts r0-r4, r10-r12
+ */
+ENTRY(tegra30_cpu_shutdown)
+	cpu_id	r3
+	tegra_get_soc_id TEGRA_APB_MISC_VIRT, r10
+	cmp	r10, #TEGRA30
+	bne	_no_cpu0_chk	@ It's not Tegra30
+
+	cmp	r3, #0
+	reteq	lr		@ Must never be called for CPU 0
+_no_cpu0_chk:
+
+	ldr	r12, =TEGRA_FLOW_CTRL_VIRT
+	cpu_to_csr_reg r1, r3
+	add	r1, r1, r12	@ virtual CSR address for this CPU
+	cpu_to_halt_reg r2, r3
+	add	r2, r2, r12	@ virtual HALT_EVENTS address for this CPU
+
+	/*
+	 * Clear this CPU's "event" and "interrupt" flags and power gate
+	 * it when halting but not before it is in the "WFE" state.
+	 */
+	movw	r12, \
+		FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
+		FLOW_CTRL_CSR_ENABLE
+	cmp	r10, #TEGRA30
+	moveq	r4, #(1 << 4)			@ wfe bitmap
+	movne	r4, #(1 << 8)			@ wfi bitmap
+ ARM(	orr	r12, r12, r4, lsl r3	)
+ THUMB(	lsl	r4, r4, r3		)
+ THUMB(	orr	r12, r12, r4		)
+	str	r12, [r1]
+
+	/* Halt this CPU. */
+	mov	r3, #0x400
+delay_1:
+	subs	r3, r3, #1			@ delay as a part of wfe war.
+	bge	delay_1;
+	cpsid	a				@ disable imprecise aborts.
+	ldr	r3, [r1]			@ read CSR
+	str	r3, [r1]			@ clear CSR
+
+	tst	r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
+	beq	flow_ctrl_setting_for_lp2
+
+	/* flow controller set up for hotplug */
+	mov	r3, #FLOW_CTRL_WAITEVENT		@ For hotplug
+	b	flow_ctrl_done
+flow_ctrl_setting_for_lp2:
+	/* flow controller set up for LP2 */
+	cmp	r10, #TEGRA30
+	moveq   r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT	@ For LP2
+	movne	r3, #FLOW_CTRL_WAITEVENT
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_IRQ
+	orrne	r3, r3, #FLOW_CTRL_HALT_GIC_FIQ
+flow_ctrl_done:
+	cmp	r10, #TEGRA30
+	str	r3, [r2]
+	ldr	r0, [r2]
+	b	wfe_war
+
+__cpu_reset_again:
+	dsb
+	.align 5
+	wfeeq					@ CPU should be power gated here
+	wfine
+wfe_war:
+	b	__cpu_reset_again
+
+	/*
+	 * 38 nop's, which fills rest of wfe cache line and
+	 * 4 more cachelines with nop
+	 */
+	.rept 38
+	nop
+	.endr
+	b	.				@ should never get here
+
+ENDPROC(tegra30_cpu_shutdown)
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * tegra30_sleep_core_finish(unsigned long v2p)
+ *
+ * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to
+ * tegra30_tear_down_core in IRAM
+ */
+ENTRY(tegra30_sleep_core_finish)
+	mov	r4, r0
+	/* Flush, disable the L1 data cache and exit SMP */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
+	bl	tegra_disable_clean_inv_dcache
+	mov	r0, r4
+
+	/*
+	 * Preload all the address literals that are needed for the
+	 * CPU power-gating process, to avoid loading from SDRAM which
+	 * are not supported once SDRAM is put into self-refresh.
+	 * LP0 / LP1 use physical address, since the MMU needs to be
+	 * disabled before putting SDRAM into self-refresh to avoid
+	 * memory access due to page table walks.
+	 */
+	mov32	r4, TEGRA_PMC_BASE
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+	mov32	r7, TEGRA_TMRUS_BASE
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+
+	mov32	r0, tegra30_tear_down_core
+	mov32	r1, tegra30_iram_start
+	sub	r0, r0, r1
+	mov32	r1, TEGRA_IRAM_LPx_RESUME_AREA
+	add	r0, r0, r1
+
+	ret	r3
+ENDPROC(tegra30_sleep_core_finish)
+
+/*
+ * tegra30_pm_secondary_cpu_suspend(unsigned long unused_arg)
+ *
+ * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
+ */
+ENTRY(tegra30_pm_secondary_cpu_suspend)
+	mov	r7, lr
+
+	/* Flush and disable the L1 data cache */
+	mov 	r0, #TEGRA_FLUSH_CACHE_LOUIS
+	bl	tegra_disable_clean_inv_dcache
+
+	/* Powergate this CPU. */
+	mov	r0, #0                          @ power mode flags (!hotplug)
+	bl	tegra30_cpu_shutdown
+	mov	r0, #1                          @ never return here
+	ret	r7
+ENDPROC(tegra30_pm_secondary_cpu_suspend)
+
+/*
+ * tegra30_tear_down_cpu
+ *
+ * Switches the CPU to enter sleep.
+ */
+ENTRY(tegra30_tear_down_cpu)
+	mov32	r6, TEGRA_FLOW_CTRL_BASE
+
+	b	tegra30_enter_sleep
+ENDPROC(tegra30_tear_down_cpu)
+
+/* START OF ROUTINES COPIED TO IRAM */
+	.align L1_CACHE_SHIFT
+	.globl tegra30_iram_start
+tegra30_iram_start:
+
+/*
+ * tegra30_lp1_reset
+ *
+ * reset vector for LP1 restore; copied into IRAM during suspend.
+ * Brings the system back up to a safe staring point (SDRAM out of
+ * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX,
+ * system clock running on the same PLL that it suspended at), and
+ * jumps to tegra_resume to restore virtual addressing.
+ * The physical address of tegra_resume expected to be stored in
+ * PMC_SCRATCH41.
+ *
+ * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_LPx_RESUME_AREA.
+ */
+ENTRY(tegra30_lp1_reset)
+	/*
+	 * The CPU and system bus are running at 32KHz and executing from
+	 * IRAM when this code is executed; immediately switch to CLKM and
+	 * enable PLLP, PLLM, PLLC, PLLA and PLLX.
+	 */
+	mov32	r0, TEGRA_CLK_RESET_BASE
+
+	mov	r1, #(1 << 28)
+	str	r1, [r0, #CLK_RESET_SCLK_BURST]
+	str	r1, [r0, #CLK_RESET_CCLK_BURST]
+	mov	r1, #0
+	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
+	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	beq	_no_pll_iddq_exit
+
+	pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ
+	pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r3
+
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	pllm_pmc_enable r1, r2
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0, PLLC_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0, PLLX_STORE_MASK
+
+	b	_pll_m_c_x_done
+
+_no_pll_iddq_exit:
+	/* enable PLLM via PMC */
+	mov32	r2, TEGRA_PMC_BASE
+	pllm_pmc_enable r1, r2
+
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC, PLLC_STORE_MASK
+
+_pll_m_c_x_done:
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC, PLLP_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC, PLLA_STORE_MASK
+
+	pll_locked r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+
+	/*
+	 * CPUFreq driver could select other PLL for CPU. PLLX will be
+	 * enabled by the Tegra30 CLK driver on an as-needed basis, see
+	 * tegra30_cpu_clock_resume().
+	 */
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
+	beq	1f
+
+	pll_locked r1, r0, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+
+	ldr	r1, [r0, #CLK_RESET_PLLP_BASE]
+	bic	r1, r1, #(1<<31)	@ disable PllP bypass
+	str	r1, [r0, #CLK_RESET_PLLP_BASE]
+
+	mov	r1, #CLK_RESET_PLLP_RESHIFT_DEFAULT
+	str	r1, [r0, #CLK_RESET_PLLP_RESHIFT]
+1:
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r1, [r7]
+	add	r1, r1, #LOCK_DELAY
+	wait_until r1, r7, r3
+
+	adr	r5, tegra_sdram_pad_save
+
+	ldr	r4, [r5, #0x18]		@ restore CLK_SOURCE_MSELECT
+	str	r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	ldr	r4, [r5, #0x1C]		@ restore SCLK_BURST
+	str	r4, [r0, #CLK_RESET_SCLK_BURST]
+
+	movw	r4, #:lower16:((1 << 28) | (0x4))	@ burst policy is PLLP
+	movt	r4, #:upper16:((1 << 28) | (0x4))
+	str	r4, [r0, #CLK_RESET_CCLK_BURST]
+
+	/* Restore pad power state to normal */
+	ldr	r1, [r5, #0x14]		@ PMC_IO_DPD_STATUS
+	mvn	r1, r1
+	bic	r1, r1, #(1 << 31)
+	orr	r1, r1, #(1 << 30)
+	str	r1, [r2, #PMC_IO_DPD_REQ]	@ DPD_OFF
+
+	cmp	r10, #TEGRA30
+	movweq	r0, #:lower16:TEGRA_EMC_BASE	@ r0 reserved for emc base
+	movteq	r0, #:upper16:TEGRA_EMC_BASE
+	cmp	r10, #TEGRA114
+	movweq	r0, #:lower16:TEGRA_EMC0_BASE
+	movteq	r0, #:upper16:TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	movweq	r0, #:lower16:TEGRA124_EMC_BASE
+	movteq	r0, #:upper16:TEGRA124_EMC_BASE
+
+exit_self_refresh:
+	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r5, #0x10]		@ restore EMC_XM2VTTGENPADCTRL2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	ldr	r1, [r5, #0x8]		@ restore EMC_AUTO_CAL_INTERVAL
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+
+	/* Relock DLL */
+	ldr	r1, [r0, #EMC_CFG_DIG_DLL]
+	orr	r1, r1, #(1 << 30)	@ set DLL_RESET
+	str	r1, [r0, #EMC_CFG_DIG_DLL]
+
+	emc_timing_update r1, r0
+
+	cmp	r10, #TEGRA114
+	movweq	r1, #:lower16:TEGRA_EMC1_BASE
+	movteq	r1, #:upper16:TEGRA_EMC1_BASE
+	cmpeq	r0, r1
+
+	ldr	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+	orr	r1, r1, #(1 << 31)	@ set AUTO_CAL_ACTIVE
+	orreq	r1, r1, #(1 << 27)	@ set slave mode for channel 1
+	str	r1, [r0, #EMC_AUTO_CAL_CONFIG]
+
+emc_wait_auto_cal_onetime:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal_onetime
+
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 31)	@ disable DRAM_CLK_STOP_PD
+	str	r1, [r0, #EMC_CFG]
+
+	mov	r1, #0
+	str	r1, [r0, #EMC_SELF_REF]	@ take DRAM out of self refresh
+	mov	r1, #1
+	cmp	r10, #TEGRA30
+	streq	r1, [r0, #EMC_NOP]
+	streq	r1, [r0, #EMC_NOP]
+
+	emc_device_mask r1, r0
+
+exit_selfrefresh_loop:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	ands	r2, r2, r1
+	bne	exit_selfrefresh_loop
+
+	lsr	r1, r1, #8		@ devSel, bit0:dev0, bit1:dev1
+
+	mov32	r7, TEGRA_TMRUS_BASE
+	ldr	r2, [r0, #EMC_FBIO_CFG5]
+
+	and	r2, r2,	#3		@ check DRAM_TYPE
+	cmp	r2, #2
+	beq	emc_lpddr2
+
+	/* Issue a ZQ_CAL for dev0 - DDR3 */
+	mov32	r2, 0x80000011		@ DEV_SELECTION=2, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev1 - DDR3 */
+	mov32	r2, 0x40000011		@ DEV_SELECTION=1, LENGTH=LONG, CMD=1
+	str	r2, [r0, #EMC_ZQ_CAL]
+	ldr	r2, [r7]
+	add	r2, r2, #10
+	wait_until r2, r7, r3
+	b	zcal_done
+
+emc_lpddr2:
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x800A00AB		@ DEV_SELECTION=2, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+	tst	r1, #2
+	beq	zcal_done
+
+	/* Issue a ZQ_CAL for dev0 - LPDDR2 */
+	mov32	r2, 0x400A00AB		@ DEV_SELECTION=1, MA=10, OP=0xAB
+	str	r2, [r0, #EMC_MRW]
+	ldr	r2, [r7]
+	add	r2, r2, #1
+	wait_until r2, r7, r3
+
+zcal_done:
+	mov	r1, #0			@ unstall all transactions
+	str	r1, [r0, #EMC_REQ_CTRL]
+	ldr	r1, [r5, #0x4]		@ restore EMC_ZCAL_INTERVAL
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	ldr	r1, [r5, #0x0]		@ restore EMC_CFG
+	str	r1, [r0, #EMC_CFG]
+
+	emc_timing_update r1, r0
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	__no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	addne	r5, r5, #0x20
+	bne	exit_self_refresh
+__no_dual_emc_chanl:
+
+	mov32	r0, TEGRA_PMC_BASE
+	ldr	r0, [r0, #PMC_SCRATCH41]
+	ret	r0			@ jump to tegra_resume
+ENDPROC(tegra30_lp1_reset)
+
+	.align	L1_CACHE_SHIFT
+tegra30_sdram_pad_address:
+	.word	TEGRA_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra30_sdram_pad_address_end:
+
+tegra114_sdram_pad_address:
+	.word	TEGRA_EMC0_BASE + EMC_CFG				@0x0
+	.word	TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL			@0x8
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL			@0xc
+	.word	TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2			@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA_EMC1_BASE + EMC_CFG				@0x20
+	.word	TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL			@0x24
+	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
+	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+tegra114_sdram_pad_adress_end:
+
+tegra124_sdram_pad_address:
+	.word	TEGRA124_EMC_BASE + EMC_CFG				@0x0
+	.word	TEGRA124_EMC_BASE + EMC_ZCAL_INTERVAL			@0x4
+	.word	TEGRA124_EMC_BASE + EMC_AUTO_CAL_INTERVAL		@0x8
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL		@0xc
+	.word	TEGRA124_EMC_BASE + EMC_XM2VTTGENPADCTRL2		@0x10
+	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
+	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+tegra124_sdram_pad_address_end:
+
+tegra30_sdram_pad_size:
+	.word	tegra30_sdram_pad_address_end - tegra30_sdram_pad_address
+
+tegra114_sdram_pad_size:
+	.word	tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address
+
+	.type	tegra_sdram_pad_save, %object
+tegra_sdram_pad_save:
+	.rept (tegra114_sdram_pad_adress_end - tegra114_sdram_pad_address) / 4
+	.long	0
+	.endr
+
+tegra_pll_state:
+	.word	0x0
+
+/*
+ * tegra30_tear_down_core
+ *
+ * copied into and executed from IRAM
+ * puts memory in self-refresh for LP0 and LP1
+ */
+tegra30_tear_down_core:
+	bl	tegra30_sdram_self_refresh
+	bl	tegra30_switch_cpu_to_clk32k
+	b	tegra30_enter_sleep
+
+/*
+ * tegra30_switch_cpu_to_clk32k
+ *
+ * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK
+ * to the 32KHz clock.
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_switch_cpu_to_clk32k:
+	/*
+	 * start by jumping to CLKM to safely disable PLLs, then jump to
+	 * CLKS.
+	 */
+	mov	r0, #(1 << 28)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+	/* 2uS delay delay between changing SCLK and CCLK */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	str	r0, [r5, #CLK_RESET_SCLK_DIVIDER]
+
+	/* switch the clock source of mselect to be CLK_M */
+	ldr	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+	orr	r0, r0, #MSELECT_CLKM
+	str	r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT]
+
+	/* 2uS delay delay between changing SCLK and disabling PLLs */
+	ldr	r1, [r7]
+	add	r1, r1, #2
+	wait_until r1, r7, r9
+
+	/* store enable-state of PLLs */
+	store_pll_state r0, r1, r5, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+	store_pllm_pmc_state r0, r1, r4
+
+	/* disable PLLM via PMC in LP1 */
+	ldr	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+	bic	r0, r0, #(1 << 12)
+	str	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
+
+	/* disable PLLP, PLLA, PLLC and PLLX */
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r1
+	cmp	r1, #TEGRA30
+	ldr	r0, [r5, #CLK_RESET_PLLP_BASE]
+	orrne	r0, r0, #(1 << 31)	@ enable PllP bypass on fast cluster
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLP_BASE]
+	beq	1f
+	mov	r0, #CLK_RESET_PLLP_RESHIFT_ENABLE
+	str	r0, [r5, #CLK_RESET_PLLP_RESHIFT]
+1:
+	ldr	r0, [r5, #CLK_RESET_PLLA_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLA_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLC_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLC_BASE]
+	ldr	r0, [r5, #CLK_RESET_PLLX_BASE]
+	bic	r0, r0, #(1 << 30)
+	str	r0, [r5, #CLK_RESET_PLLX_BASE]
+
+	cmp	r10, #TEGRA30
+	beq	_no_pll_in_iddq
+	pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ
+_no_pll_in_iddq:
+
+	/*
+	 * Switch to clk_s (32KHz); bits 28:31=0
+	 * Enable burst on CPU IRQ; bit 24=1
+	 * Set IRQ burst clock source to clk_m; bits 10:8=0
+	 */
+	mov	r0, #(1 << 24)
+	str	r0, [r5, #CLK_RESET_SCLK_BURST]
+
+	ret	lr
+
+/*
+ * tegra30_enter_sleep
+ *
+ * uses flow controller to enter sleep state
+ * executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
+ * executes from SDRAM with target state is LP2
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ */
+tegra30_enter_sleep:
+	cpu_id	r1
+
+	cpu_to_csr_reg	r2, r1
+	ldr	r0, [r6, r2]
+	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
+	str	r0, [r6, r2]
+
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	mov	r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
+	orreq	r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
+	orrne   r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ
+
+	cpu_to_halt_reg r2, r1
+	str	r0, [r6, r2]
+	dsb
+	ldr	r0, [r6, r2] /* memory barrier */
+
+	cmp	r10, #TEGRA30
+halted:
+	isb
+	dsb
+	wfine	/* CPU should be power gated here */
+	wfeeq
+
+	/* !!!FIXME!!! Implement halt failure handler */
+	b	halted
+
+/*
+ * tegra30_sdram_self_refresh
+ *
+ * called with MMU off and caches disabled
+ * must be executed from IRAM
+ * r4 = TEGRA_PMC_BASE
+ * r5 = TEGRA_CLK_RESET_BASE
+ * r6 = TEGRA_FLOW_CTRL_BASE
+ * r7 = TEGRA_TMRUS_BASE
+ * r10= SoC ID
+ */
+tegra30_sdram_self_refresh:
+
+	adr	r8, tegra_sdram_pad_save
+	tegra_get_soc_id TEGRA_APB_MISC_BASE, r10
+	cmp	r10, #TEGRA30
+	adreq	r2, tegra30_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+	cmp	r10, #TEGRA114
+	adreq	r2, tegra114_sdram_pad_address
+	ldreq	r3, tegra114_sdram_pad_size
+	cmp	r10, #TEGRA124
+	adreq	r2, tegra124_sdram_pad_address
+	ldreq	r3, tegra30_sdram_pad_size
+
+	mov	r9, #0
+
+padsave:
+	ldr	r0, [r2, r9]		@ r0 is the addr in the pad_address
+
+	ldr	r1, [r0]
+	str	r1, [r8, r9]		@ save the content of the addr
+
+	add	r9, r9, #4
+	cmp	r3, r9
+	bne	padsave
+padsave_done:
+
+	dsb
+
+	cmp	r10, #TEGRA30
+	ldreq	r0, =TEGRA_EMC_BASE	@ r0 reserved for emc base addr
+	cmp	r10, #TEGRA114
+	ldreq	r0, =TEGRA_EMC0_BASE
+	cmp	r10, #TEGRA124
+	ldreq	r0, =TEGRA124_EMC_BASE
+
+enter_self_refresh:
+	cmp	r10, #TEGRA30
+	mov	r1, #0
+	str	r1, [r0, #EMC_ZCAL_INTERVAL]
+	str	r1, [r0, #EMC_AUTO_CAL_INTERVAL]
+	ldr	r1, [r0, #EMC_CFG]
+	bic	r1, r1, #(1 << 28)
+	bicne	r1, r1, #(1 << 29)
+	str	r1, [r0, #EMC_CFG]	@ disable DYN_SELF_REF
+
+	emc_timing_update r1, r0
+
+	ldr	r1, [r7]
+	add	r1, r1, #5
+	wait_until r1, r7, r2
+
+emc_wait_auto_cal:
+	ldr	r1, [r0, #EMC_AUTO_CAL_STATUS]
+	tst	r1, #(1 << 31)		@ wait until AUTO_CAL_ACTIVE is cleared
+	bne	emc_wait_auto_cal
+
+	mov	r1, #3
+	str	r1, [r0, #EMC_REQ_CTRL]	@ stall incoming DRAM requests
+
+emcidle:
+	ldr	r1, [r0, #EMC_EMC_STATUS]
+	tst	r1, #4
+	beq	emcidle
+
+	mov	r1, #1
+	str	r1, [r0, #EMC_SELF_REF]
+
+	emc_device_mask r1, r0
+
+emcself:
+	ldr	r2, [r0, #EMC_EMC_STATUS]
+	and	r2, r2, r1
+	cmp	r2, r1
+	bne	emcself			@ loop until DDR in self-refresh
+
+	/* Put VTTGEN in the lowest power mode */
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	mov32	r2, 0xF8F8FFFF	@ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN
+	and	r1, r1, r2
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
+	ldr	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+	cmp	r10, #TEGRA30
+	orreq	r1, r1, #7		@ set E_NO_VTTGEN
+	orrne	r1, r1, #0x3f
+	str	r1, [r0, #EMC_XM2VTTGENPADCTRL2]
+
+	emc_timing_update r1, r0
+
+	/* Tegra114 had dual EMC channel, now config the other one */
+	cmp	r10, #TEGRA114
+	bne	no_dual_emc_chanl
+	mov32	r1, TEGRA_EMC1_BASE
+	cmp	r0, r1
+	movne	r0, r1
+	bne	enter_self_refresh
+no_dual_emc_chanl:
+
+	ldr	r1, [r4, #PMC_CTRL]
+	tst	r1, #PMC_CTRL_SIDE_EFFECT_LP0
+	bne	pmc_io_dpd_skip
+	/*
+	 * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK
+	 * and COMP in the lowest power mode when LP1.
+	 */
+	mov32	r1, 0x8EC00000
+	str	r1, [r4, #PMC_IO_DPD_REQ]
+pmc_io_dpd_skip:
+
+	dsb
+
+	ret	lr
+
+	.ltorg
+/* dummy symbol for end of IRAM */
+	.align L1_CACHE_SHIFT
+	.global tegra30_iram_end
+tegra30_iram_end:
+	b	.
+#endif
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
new file mode 100644
index 000000000..945f2c147
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep.S
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * arch/arm/mach-tegra/sleep.S
+ *
+ * Copyright (c) 2010-2011, NVIDIA Corporation.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/cache.h>
+#include <asm/cp15.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "iomap.h"
+#include "sleep.h"
+
+#define CLK_RESET_CCLK_BURST	0x20
+#define CLK_RESET_CCLK_DIVIDER  0x24
+
+.arch armv7-a
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra_disable_clean_inv_dcache
+ *
+ * disable, clean & invalidate the D-cache
+ *
+ * Corrupted registers: r1-r3, r6, r8, r9-r11
+ */
+ENTRY(tegra_disable_clean_inv_dcache)
+	stmfd	sp!, {r0, r4-r5, r7, r9-r11, lr}
+	dmb					@ ensure ordering
+
+	/* Disable the D-cache */
+	mrc	p15, 0, r2, c1, c0, 0
+	tst	r2, #CR_C			@ see tegra_sleep_cpu()
+	bic	r2, r2, #CR_C
+	mcrne	p15, 0, r2, c1, c0, 0
+	isb
+
+	/* Flush the D-cache */
+	cmp	r0, #TEGRA_FLUSH_CACHE_ALL
+	blne	v7_flush_dcache_louis
+	bleq	v7_flush_dcache_all
+
+	/* Trun off coherency */
+	exit_smp r4, r5
+
+	ldmfd	sp!, {r0, r4-r5, r7, r9-r11, pc}
+ENDPROC(tegra_disable_clean_inv_dcache)
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * tegra_init_l2_for_a15
+ *
+ * set up the correct L2 cache data RAM latency
+ */
+ENTRY(tegra_init_l2_for_a15)
+	mrc	p15, 0, r0, c0, c0, 5
+	ubfx	r0, r0, #8, #4
+	tst	r0, #1				@ only need for cluster 0
+	bne	_exit_init_l2_a15
+
+	mrc	p15, 0x1, r0, c9, c0, 2
+	and	r0, r0, #7
+	cmp	r0, #2
+	bicne	r0, r0, #7
+	orrne	r0, r0, #2
+	mcrne	p15, 0x1, r0, c9, c0, 2
+_exit_init_l2_a15:
+
+	ret	lr
+ENDPROC(tegra_init_l2_for_a15)
+
+/*
+ * tegra_sleep_cpu_finish(unsigned long v2p)
+ *
+ * enters suspend in LP2 by turning off the mmu and jumping to
+ * tegra?_tear_down_cpu
+ */
+ENTRY(tegra_sleep_cpu_finish)
+	mov	r4, r0
+	/* Flush and disable the L1 data cache */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
+	bl	tegra_disable_clean_inv_dcache
+
+	mov	r0, r4
+	mov32	r6, tegra_tear_down_cpu
+	ldr	r1, [r6]
+	add	r1, r1, r0
+
+	mov32	r3, tegra_shut_off_mmu
+	add	r3, r3, r0
+	mov	r0, r1
+
+	ret	r3
+ENDPROC(tegra_sleep_cpu_finish)
+
+/*
+ * tegra_shut_off_mmu
+ *
+ * r0 = physical address to jump to with mmu off
+ *
+ * called with VA=PA mapping
+ * turns off MMU, icache, dcache and branch prediction
+ */
+	.align	L1_CACHE_SHIFT
+	.pushsection	.idmap.text, "ax"
+ENTRY(tegra_shut_off_mmu)
+	mrc	p15, 0, r3, c1, c0, 0
+	movw	r2, #CR_I | CR_Z | CR_C | CR_M
+	bic	r3, r3, r2
+	dsb
+	mcr	p15, 0, r3, c1, c0, 0
+	isb
+#ifdef CONFIG_CACHE_L2X0
+	/* Disable L2 cache */
+	check_cpu_part_num 0xc09, r9, r10
+	retne	r0
+
+	mov32	r2, TEGRA_ARM_PERIF_BASE + 0x3000
+	ldr	r3, [r2, #L2X0_CTRL]
+	tst	r3, #L2X0_CTRL_EN		@ see tegra_sleep_cpu()
+	mov	r3, #0
+	strne	r3, [r2, #L2X0_CTRL]
+#endif
+	ret	r0
+ENDPROC(tegra_shut_off_mmu)
+	.popsection
+
+/*
+ * tegra_switch_cpu_to_pllp
+ *
+ * In LP2 the normal cpu clock pllx will be turned off. Switch the CPU to pllp
+ */
+ENTRY(tegra_switch_cpu_to_pllp)
+	/* in LP2 idle (SDRAM active), set the CPU burst policy to PLLP */
+	mov32	r5, TEGRA_CLK_RESET_BASE
+	mov	r0, #(2 << 28)			@ burst policy = run mode
+	orr	r0, r0, #(4 << 4)		@ use PLLP in run mode burst
+	str	r0, [r5, #CLK_RESET_CCLK_BURST]
+	mov	r0, #0
+	str	r0, [r5, #CLK_RESET_CCLK_DIVIDER]
+	ret	lr
+ENDPROC(tegra_switch_cpu_to_pllp)
+#endif
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
new file mode 100644
index 000000000..4718a3cb4
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2010-2013, NVIDIA Corporation. All rights reserved.
+ */
+
+#ifndef __MACH_TEGRA_SLEEP_H
+#define __MACH_TEGRA_SLEEP_H
+
+#include "iomap.h"
+#include "irammap.h"
+
+#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+					+ IO_CPU_VIRT)
+#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+					+ IO_PPSB_VIRT)
+#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
+					+ IO_PPSB_VIRT)
+#define TEGRA_APB_MISC_VIRT (TEGRA_APB_MISC_BASE - IO_APB_PHYS \
+					+ IO_APB_VIRT)
+#define TEGRA_PMC_VIRT	(TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
+
+#define TEGRA_IRAM_RESET_BASE_VIRT (IO_IRAM_VIRT + \
+				TEGRA_IRAM_RESET_HANDLER_OFFSET)
+
+/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
+#define PMC_SCRATCH37	0x130
+#define PMC_SCRATCH38	0x134
+#define PMC_SCRATCH39	0x138
+#define PMC_SCRATCH41	0x140
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+#define CPU_RESETTABLE		2
+#define CPU_RESETTABLE_SOON	1
+#define CPU_NOT_RESETTABLE	0
+#endif
+
+/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */
+#define TEGRA_FLUSH_CACHE_LOUIS	0
+#define TEGRA_FLUSH_CACHE_ALL	1
+
+#ifdef __ASSEMBLY__
+/* waits until the microsecond counter (base) is > rn */
+.macro wait_until, rn, base, tmp
+	add	\rn, \rn, #1
+1001:	ldr	\tmp, [\base]
+	cmp	\tmp, \rn
+	bmi	1001b
+.endm
+
+/* returns the offset of the flow controller halt register for a cpu */
+.macro cpu_to_halt_reg rd, rcpu
+	cmp	\rcpu, #0
+	subne	\rd, \rcpu, #1
+	movne	\rd, \rd, lsl #3
+	addne	\rd, \rd, #0x14
+	moveq	\rd, #0
+.endm
+
+/* returns the offset of the flow controller csr register for a cpu */
+.macro cpu_to_csr_reg rd, rcpu
+	cmp	\rcpu, #0
+	subne	\rd, \rcpu, #1
+	movne	\rd, \rd, lsl #3
+	addne	\rd, \rd, #0x18
+	moveq	\rd, #8
+.endm
+
+/* returns the ID of the current processor */
+.macro cpu_id, rd
+	mrc	p15, 0, \rd, c0, c0, 5
+	and	\rd, \rd, #0xF
+.endm
+
+/* loads a 32-bit value into a register without a data access */
+.macro mov32, reg, val
+	movw	\reg, #:lower16:\val
+	movt	\reg, #:upper16:\val
+.endm
+
+/* Marco to check CPU part num */
+.macro check_cpu_part_num part_num, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c0, c0, 0
+	ubfx	\tmp1, \tmp1, #4, #12
+	mov32	\tmp2, \part_num
+	cmp	\tmp1, \tmp2
+.endm
+
+/* Macro to exit SMP coherency. */
+.macro exit_smp, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c1, c0, 1	@ ACTLR
+	bic	\tmp1, \tmp1, #(1<<6) | (1<<0)	@ clear ACTLR.SMP | ACTLR.FW
+	mcr	p15, 0, \tmp1, c1, c0, 1	@ ACTLR
+	isb
+#ifdef CONFIG_HAVE_ARM_SCU
+	check_cpu_part_num 0xc09, \tmp1, \tmp2
+	mrceq	p15, 0, \tmp1, c0, c0, 5
+	andeq	\tmp1, \tmp1, #0xF
+	moveq	\tmp1, \tmp1, lsl #2
+	moveq	\tmp2, #0xf
+	moveq	\tmp2, \tmp2, lsl \tmp1
+	ldreq	\tmp1, =(TEGRA_ARM_PERIF_VIRT + 0xC)
+	streq	\tmp2, [\tmp1]			@ invalidate SCU tags for CPU
+	dsb
+#endif
+.endm
+
+/* Macro to check Tegra revision */
+#define APB_MISC_GP_HIDREV	0x804
+.macro tegra_get_soc_id base, tmp1
+	mov32	\tmp1, \base
+	ldr	\tmp1, [\tmp1, #APB_MISC_GP_HIDREV]
+	and	\tmp1, \tmp1, #0xff00
+	mov	\tmp1, \tmp1, lsr #8
+.endm
+
+#else
+void tegra_resume(void);
+int tegra_sleep_cpu_finish(unsigned long);
+void tegra_disable_clean_inv_dcache(u32 flag);
+
+void tegra20_hotplug_shutdown(void);
+void tegra30_hotplug_shutdown(void);
+
+void tegra20_tear_down_cpu(void);
+void tegra30_tear_down_cpu(void);
+
+#endif
+#endif
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
new file mode 100644
index 000000000..9ef1dfa7b
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NVIDIA Tegra SoC device tree board support
+ *
+ * Copyright (C) 2011, 2013, NVIDIA Corporation
+ * Copyright (C) 2010 Secret Lab Technologies, Ltd.
+ * Copyright (C) 2010 Google, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/tegra.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/usb/tegra_usb_phy.h>
+
+#include <linux/firmware/trusted_foundations.h>
+
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/pmc.h>
+
+#include <asm/firmware.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/psci.h>
+#include <asm/setup.h>
+
+#include "board.h"
+#include "common.h"
+#include "iomap.h"
+#include "pm.h"
+#include "reset.h"
+#include "sleep.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 tegra_uart_config[3] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	0,
+	/* Debug UART virtual address */
+	0,
+};
+
+static void __init tegra_init_early(void)
+{
+	of_register_trusted_foundations();
+	tegra_cpu_reset_handler_init();
+	call_firmware_op(l2x0_init);
+}
+
+static void __init tegra_dt_init_irq(void)
+{
+	tegra_init_irq();
+	irqchip_init();
+}
+
+static void __init tegra_dt_init(void)
+{
+	struct device *parent = tegra_soc_device_register();
+
+	of_platform_default_populate(NULL, NULL, parent);
+}
+
+static void __init tegra_dt_init_late(void)
+{
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
+	    of_machine_is_compatible("compal,paz00"))
+		tegra_paz00_wifikill_init();
+
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) &&
+	    of_machine_is_compatible("nvidia,tegra20"))
+		platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
+
+	if (IS_ENABLED(CONFIG_ARM_TEGRA_CPUIDLE) && !psci_smp_available())
+		platform_device_register_simple("tegra-cpuidle", -1, NULL, 0);
+
+	if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) &&
+	    of_machine_is_compatible("nvidia,tegra30"))
+		platform_device_register_simple("tegra20-cpufreq", -1, NULL, 0);
+}
+
+static const char * const tegra_dt_board_compat[] = {
+	"nvidia,tegra124",
+	"nvidia,tegra114",
+	"nvidia,tegra30",
+	"nvidia,tegra20",
+	NULL
+};
+
+DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)")
+	.l2c_aux_val	= 0x3c400000,
+	.l2c_aux_mask	= 0xc20fc3ff,
+	.smp		= smp_ops(tegra_smp_ops),
+	.map_io		= tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq	= tegra_dt_init_irq,
+	.init_machine	= tegra_dt_init,
+	.init_late	= tegra_dt_init_late,
+	.dt_compat	= tegra_dt_board_compat,
+MACHINE_END