diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts | 1007 |
1 files changed, 1007 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts new file mode 100644 index 0000000000..b1f2beb40a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -0,0 +1,1007 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mm.dtsi" + +/ { + model = "Data Modul i.MX8M Mini eDM SBC"; + compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + /* There are 1/2/4 GiB options, adjusted by bootloader. */ + reg = <0x0 0x40000000 0 0x40000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_backlight>; + brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 5000000 0>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clk_xtal32k: clk-xtal32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + panel: panel { + backlight = <&backlight>; + power-supply = <®_panel_vcc>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_panel_vcc: regulator-panel-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_vcc_reg>; + regulator-name = "PANEL_VCC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 6 0>; + enable-active-high; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_usdhc2_vcc: regulator-usdhc2-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 0>; + enable-active-high; + }; + + watchdog { + /* TPS3813 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog_gpio>; + compatible = "linux,wdt-gpio"; + always-running; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + /* Reset triggers in 2..3 seconds */ + hw_margin_ms = <1500>; + /* Disabled by default */ + status = "disabled"; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750000000 { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { /* W25Q128FVSI */ + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&ecspi2 { /* Feature connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless feature board plugged in. */ + status = "disabled"; +}; + +&ecspi3 { /* Display connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <&fec1_phy>; + phy-supply = <&buck4_reg>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + fec1_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "ENET_RST#", "WDOG_B#", "PMIC_INT#", + "", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#", + "WDOG_KICK#", "M2-B_PCIE_CLKREQ#", + "USB1_OTG_ID_3V3", "ENET_WOL#", + "", "", "", "ENET_INT#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#", + "M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#", + "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#", + "MEMCFG0", "WDOG_EN", + "M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#", + "", "", "", "", + "", "", "", "SD2_RESET#", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", + "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", + "CSI_PD_1V8", "CSI_RESET_1V8#", "", "", + "", "", "", "", + "", "", "", "M2-B_WAKE_WWAN_1V8#", + "M2-B_RESET_1V8#", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "NC0", "NC1", "BOOTCFG0", "BOOTCFG1", + "BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5", + "BOOTCFG6", "BOOTCFG7", "NC10", "NC11", + "BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11", + "BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15", + "NC20", "", "", "", + "", "CAN_INT#", "CAN_RST#", "GPIO4_IO27", + "DIS_USB_DN2", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03", + "GPIO5_IO04", "", "", "", + "", "SPI1_CS#", "", "", + "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", + "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", + "I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "", + "", "SPI3_CS#", "", "", "", "", "", ""; +}; + +&i2c1 { + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + #clock-cells = <0>; + clocks = <&clk_xtal32k>; + clock-output-names = "clk-32k-out"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + rohm,reset-snvs-powered; + + /* + * i.MX 8M Mini Data Sheet for Consumer Products + * 3.1.3 Operating ranges + * MIMX8MM4DVTLZAA + */ + regulators { + /* VDD_SOC */ + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <950000>; + }; + + /* VDD_DRAM, BUCK5 */ + buck3_reg: BUCK3 { + regulator-name = "buck3"; + /* 1.5 GHz DDR bus clock */ + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 3V3_VDD, BUCK6 */ + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_VDD, BUCK7 */ + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V1_NVCC_DRAM, BUCK8 */ + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_NVCC_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 0V8_VDD_SNVS */ + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_VDDA */ + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 0V9_VDD_PHY */ + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V2_VDD_PHY */ + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + usb-hub@2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + compatible = "microchip,usb2514bi"; + reg = <0x2c>; + individual-port-switching; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + self-powered; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "st,m41t62"; + reg = <0x68>; + interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pcieclk: clk@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; +}; + +&i2c3 { /* Display connector I2C */ + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <320000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { /* Feature connector I2C */ + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <320000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, + <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, + <&pinctrl_panel_expansion>; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x44 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x44 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x44 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x44 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x44 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x44 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x44 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x44 + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x44 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x40 + >; + }; + + pinctrl_fec1: fec1-grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + /* ENET_RST# */ + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x6 + /* ENET_WOL# */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000090 + /* ENET_INT# */ + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000090 + >; + }; + + pinctrl_hog_feature: hog-feature-grp { + fsl,pins = < + /* GPIO4_IO27 */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000006 + /* GPIO5_IO03 */ + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000006 + /* GPIO5_IO04 */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000006 + + /* CAN_INT# */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000090 + /* CAN_RST# */ + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x26 + >; + }; + + pinctrl_hog_panel: hog-panel-grp { + fsl,pins = < + /* GRAPHICS_GPIO0_1V8 */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x26 + >; + }; + + pinctrl_hog_misc: hog-misc-grp { + fsl,pins = < + /* PG_V_IN_VAR# */ + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000000 + /* CSI_PD_1V8 */ + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x0 + /* CSI_RESET_1V8# */ + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x0 + + /* DIS_USB_DN1 */ + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x0 + /* DIS_USB_DN2 */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x0 + + /* EEPROM_WP_1V8# */ + MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x100 + /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0 + /* GRAPHICS_PRSNT_1V8# */ + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x40000000 + + /* CLK_CCM_CLKO1_3V3 */ + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x10 + >; + }; + + pinctrl_hog_sbc: hog-sbc-grp { + fsl,pins = < + /* MEMCFG[0..2] straps */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000140 + MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000140 + MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000140 + + /* BOOT_CFG[0..15] straps */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000000 + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000000 + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000000 + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000000 + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000000 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000000 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000000 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x40000000 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000000 + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x40000000 + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000000 + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x40000000 + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000000 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000000 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000000 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x40000000 + + /* Not connected pins */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x0 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x0 + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x0 + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x0 + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000084 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000084 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x84 + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x84 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000084 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000084 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x84 + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x84 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000084 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x84 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c4: i2c4-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000084 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000084 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x84 + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x84 + >; + }; + + pinctrl_panel_backlight: panel-backlight-grp { + fsl,pins = < + /* BL_ENABLE_1V8 */ + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x104 + >; + }; + + pinctrl_panel_expansion: panel-expansion-grp { + fsl,pins = < + /* DSI_RESET_1V8# */ + MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x2 + /* DSI_IRQ_1V8# */ + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x40000090 + >; + }; + + pinctrl_panel_vcc_reg: panel-vcc-grp { + fsl,pins = < + /* TFT_ENABLE_1V8 */ + MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x104 + >; + }; + + pinctrl_panel_pwm: panel-pwm-grp { + fsl,pins = < + /* BL_PWM_3V3 */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x12 + >; + }; + + pinctrl_pcie0: pcie-grp { + fsl,pins = < + /* M2-B_RESET_1V8# */ + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x102 + /* M2-B_PCIE_RST# */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x2 + /* M2-B_FULL_CARD_PWROFF_1V8# */ + MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x102 + /* M2-B_W_DISABLE1_WWAN_1V8# */ + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x102 + /* M2-B_W_DISABLE2_GPS_1V8# */ + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x102 + /* CLK_M2_32K768 */ + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x14 + /* M2-B_WAKE_WWAN_1V8# */ + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x40000140 + /* M2-B_PCIE_WAKE# */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000140 + /* M2-B_PCIE_CLKREQ# */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000140 + >; + }; + + pinctrl_pmic: pmic-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000090 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + /* RTC_IRQ# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000090 + >; + }; + + pinctrl_sai5: sai5-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x100 + MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x0 + MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x100 + MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x100 + MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x100 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x90 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x90 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x50 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x50 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x50 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x90 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x50 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x90 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x40 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x40 + >; + }; + + pinctrl_usb_hub: usb-hub-grp { + fsl,pins = < + /* USBHUB_RESET# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x4 + >; + }; + + pinctrl_usb_otg1: usb-otg1-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000000 + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x4 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x40000090 + >; + }; + + pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x4 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_watchdog_gpio: watchdog-gpio-grp { + fsl,pins = < + /* WDOG_B# */ + MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x26 + /* WDOG_EN -- ungate WDT RESET# signal propagation */ + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x6 + /* WDOG_KICK# / WDI */ + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x26 + >; + }; +}; + +&pcie_phy { + fsl,clkreq-unsupported; /* CLKREQ_B is not connected to suitable input */ + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + clocks = <&pcieclk 0>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 0>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_pwm>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&sai5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + fsl,sai-mclk-direction-output; + /* Input into codec PLL */ + assigned-clocks = <&clk IMX8MM_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; + assigned-clock-rates = <22579200>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&snvs_rtc { + clocks = <&pmic>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&uart3 { /* A53 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* M4 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + /* UART4 is reserved for CM and RDC blocks CA access to UART4. */ + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { /* MicroSD */ + assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vcc>; + status = "okay"; +}; + +&usdhc3 { /* eMMC */ + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; |