Adding upstream version 6.9.7.upstream/6.9.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

63 files changed, 3676 insertions, 345 deletions

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2cb0212b63..045250d0a0 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8dxp-tqma8xdp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
@@ -152,7 +153,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
 
 imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtbo
+imx8mn-tqma8mqnl-mba8mx-usbotg-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-usbotg.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-usbotg.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
@@ -207,8 +210,10 @@ imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33-dtbs += imx8mq-tqma8mq-mba8mx.dtb imx8mq-
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
@@ -218,10 +223,13 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 1e3fe3897b..fe9093b3c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -290,7 +290,7 @@
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1012a-dcfg",
 				     "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -351,24 +351,26 @@
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 2 0>;
 			status = "disabled";
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
+			scl-gpios = <&gpio0 13 0>;
 			status = "disabled";
 		};
 
@@ -499,6 +501,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			snps,host-vbus-glitches;
 		};
 
 		sata: sata@3200000 {
@@ -550,6 +553,7 @@
 					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 1515cec231..754a64be73 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -485,7 +485,6 @@
 				<0x00030005 0x00000042>,
 				<0x00030006 0x0000004c>,
 				<0x00030007 0x00000056>;
-			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8616d5e0c3..604bf88d70 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -591,6 +591,8 @@
 			reg = <0x00 0x03400000 0x0 0x00100000>,
 			      <0x20 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <24>;
 			num-ob-windows = <256>;
 			max-functions = /bits/ 8 <2>;
@@ -628,6 +630,8 @@
 			reg = <0x00 0x03500000 0x0 0x00100000>,
 			      <0x28 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
@@ -664,6 +668,8 @@
 			reg = <0x00 0x03600000 0x0 0x00100000>,
 			      <0x30 0x00000000 0x8 0x00000000>;
 			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
 			num-ib-windows = <6>;
 			num-ob-windows = <6>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6640b49670..e665c629e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -949,34 +949,50 @@
 		};
 
 		uart0: serial@21c0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21c0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart1: serial@21d0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21d0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart2: serial@21e0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21e0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
 		uart3: serial@21f0000 {
-			compatible = "arm,sbsa-uart","arm,pl011";
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "uartclk", "apb_pclk";
 			reg = <0x0 0x21f0000 0x0 0x1000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			current-speed = <115200>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
new file mode 100644
index 0000000000..0f77f78f4d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
new file mode 100644
index 0000000000..f5c6a0164f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		enable-active-high;
+		gpio = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* Power/Current Measurement Sensor */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148 */
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x00000021>; /* MXM3_152 */
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158 */
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021>; /* MXM3_156 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
index 685d4294f4..deecb96a15 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -35,18 +35,6 @@
 	status = "okay";
 };
 
-/* Apalis CAN1 */
-&flexcan1 {
-	status = "okay";
-};
-
-/* Apalis CAN2 */
-&flexcan2 {
-	status = "okay";
-};
-
-/* TODO: GPU */
-
 /* Apalis I2C1 */
 &i2c2 {
 	status = "okay";
@@ -132,13 +120,3 @@
 };
 
 /* TODO: Apalis USBH4 SuperSpeed */
-
-/* Apalis MMC1 */
-&usdhc2 {
-	status = "okay";
-};
-
-/* Apalis SD1 */
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index f69b0c1756..160153853b 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -261,7 +261,6 @@
 			reset-assert-us = <2>;
 			reset-deassert-us = <2>;
 			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
-			reset-names = "phy";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index f057c6b21b..07afeb78ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -4,6 +4,7 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
@@ -14,12 +15,174 @@ audio_ipg_clk: clock-audio-ipg {
 	clock-output-names = "audio_ipg_clk";
 };
 
+clk_ext_aud_mclk0: clock-ext-aud-mclk0 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk0";
+};
+
+clk_ext_aud_mclk1: clock-ext-aud-mclk1 {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "ext_aud_mclk1";
+};
+
+clk_esai0_rx_clk: clock-esai0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_clk";
+};
+
+clk_esai0_rx_hf_clk: clock-esai0-rx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_rx_hf_clk";
+};
+
+clk_esai0_tx_clk: clock-esai0-tx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_clk";
+};
+
+clk_esai0_tx_hf_clk: clock-esai0-tx-hf {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "esai0_tx_hf_clk";
+};
+
+clk_spdif0_rx: clock-spdif0-rx {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "spdif0_rx";
+};
+
+clk_sai0_rx_bclk: clock-sai0-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_rx_bclk";
+};
+
+clk_sai0_tx_bclk: clock-sai0-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai0_tx_bclk";
+};
+
+clk_sai1_rx_bclk: clock-sai1-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_rx_bclk";
+};
+
+clk_sai1_tx_bclk: clock-sai1-tx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai1_tx_bclk";
+};
+
+clk_sai2_rx_bclk: clock-sai2-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai2_rx_bclk";
+};
+
+clk_sai3_rx_bclk: clock-sai3-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai3_rx_bclk";
+};
+
+clk_sai4_rx_bclk: clock-sai4-rx-bclk {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <0>;
+	clock-output-names = "sai4_rx_bclk";
+};
+
 audio_subsys: bus@59000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
 
+	sai0: sai@59040000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59040000 0x10000>;
+		interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai0_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai0_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 12 0 1>, <&edma0 13 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+		status = "disabled";
+	};
+
+	sai1: sai@59050000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59050000 0x10000>;
+		interrupts = <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai1_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai1_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx", "tx";
+		dmas = <&edma0 14 0 1>, <&edma0 15 0 0>;
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+		status = "disabled";
+	};
+
+	sai2: sai@59060000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59060000 0x10000>;
+		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai2_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai2_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 16 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+		status = "disabled";
+	};
+
+	sai3: sai@59070000 {
+		compatible = "fsl,imx8qm-sai";
+		reg = <0x59070000 0x10000>;
+		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sai3_lpcg 1>,
+			 <&clk_dummy>,
+			 <&sai3_lpcg 0>,
+			 <&clk_dummy>,
+			 <&clk_dummy>;
+		clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+		dma-names = "rx";
+		dmas = <&edma0 17 0 1>;
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+		status = "disabled";
+	};
+
 	edma0: dma-controller@591f0000 {
 		compatible = "fsl,imx8qm-edma";
 		reg = <0x591f0000 0x190000>;
@@ -76,6 +239,54 @@ audio_subsys: bus@59000000 {
 				<&pd IMX_SC_R_DMA_0_CH23>;
 	};
 
+	sai0_lpcg: clock-controller@59440000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI0_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai0_lpcg_mclk",
+				     "sai0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_0>;
+	};
+
+	sai1_lpcg: clock-controller@59450000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI1_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai1_lpcg_mclk",
+				     "sai1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_1>;
+	};
+
+	sai2_lpcg: clock-controller@59460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI2_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai2_lpcg_mclk",
+				     "sai2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_2>;
+	};
+
+	sai3_lpcg: clock-controller@59470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_SAI3_MCLK_SEL>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "sai3_lpcg_mclk",
+				     "sai3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SAI_3>;
+	};
+
 	dsp_lpcg: clock-controller@59580000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x59580000 0x10000>;
@@ -151,4 +362,123 @@ audio_subsys: bus@59000000 {
 				<&pd IMX_SC_R_DMA_1_CH9>,
 				<&pd IMX_SC_R_DMA_1_CH10>;
 	};
+
+	aud_rec0_lpcg: clock-controller@59d00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_rec1_lpcg: clock-controller@59d10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_rec_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	aud_pll_div0_lpcg: clock-controller@59d20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_0>;
+	};
+
+	aud_pll_div1_lpcg: clock-controller@59d30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "aud_pll_div_clk1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_AUDIO_PLL_1>;
+	};
+
+	mclkout0_lpcg: clock-controller@59d50000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d50000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT0_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout0_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_0>;
+	};
+
+	mclkout1_lpcg: clock-controller@59d60000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59d60000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&acm IMX_ADMA_ACM_MCLKOUT1_SEL>;
+		clock-indices = <IMX_LPCG_CLK_0>;
+		clock-output-names = "mclkout1_lpcg_clk";
+		power-domains = <&pd IMX_SC_R_MCLK_OUT_1>;
+	};
+
+	acm: acm@59e00000 {
+		compatible = "fsl,imx8qxp-acm";
+		reg = <0x59e00000 0x1d0000>;
+		#clock-cells = <1>;
+		power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+				<&pd IMX_SC_R_AUDIO_CLK_1>,
+				<&pd IMX_SC_R_MCLK_OUT_0>,
+				<&pd IMX_SC_R_MCLK_OUT_1>,
+				<&pd IMX_SC_R_AUDIO_PLL_0>,
+				<&pd IMX_SC_R_AUDIO_PLL_1>,
+				<&pd IMX_SC_R_ASRC_0>,
+				<&pd IMX_SC_R_ASRC_1>,
+				<&pd IMX_SC_R_ESAI_0>,
+				<&pd IMX_SC_R_SAI_0>,
+				<&pd IMX_SC_R_SAI_1>,
+				<&pd IMX_SC_R_SAI_2>,
+				<&pd IMX_SC_R_SAI_3>,
+				<&pd IMX_SC_R_SAI_4>,
+				<&pd IMX_SC_R_SAI_5>,
+				<&pd IMX_SC_R_SPDIF_0>,
+				<&pd IMX_SC_R_MQS_0>;
+		clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+			 <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+			 <&clk_ext_aud_mclk0>,
+			 <&clk_ext_aud_mclk1>,
+			 <&clk_esai0_rx_clk>,
+			 <&clk_esai0_rx_hf_clk>,
+			 <&clk_esai0_tx_clk>,
+			 <&clk_esai0_tx_hf_clk>,
+			 <&clk_spdif0_rx>,
+			 <&clk_sai0_rx_bclk>,
+			 <&clk_sai0_tx_bclk>,
+			 <&clk_sai1_rx_bclk>,
+			 <&clk_sai1_tx_bclk>,
+			 <&clk_sai2_rx_bclk>,
+			 <&clk_sai3_rx_bclk>,
+			 <&clk_sai4_rx_bclk>;
+		clock-names = "aud_rec_clk0_lpcg_clk",
+			      "aud_rec_clk1_lpcg_clk",
+			      "aud_pll_div_clk0_lpcg_clk",
+			      "aud_pll_div_clk1_lpcg_clk",
+			      "ext_aud_mclk0",
+			      "ext_aud_mclk1",
+			      "esai0_rx_clk",
+			      "esai0_rx_hf_clk",
+			      "esai0_tx_clk",
+			      "esai0_tx_hf_clk",
+			      "spdif0_rx",
+			      "sai0_rx_bclk",
+			      "sai0_tx_bclk",
+			      "sai1_rx_bclk",
+			      "sai1_tx_bclk",
+			      "sai2_rx_bclk",
+			      "sai3_rx_bclk",
+			      "sai4_rx_bclk";
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index 67b3c75732..f7a91d43a0 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
 dma_ipg_clk: clock-dma-ipg {
@@ -93,8 +94,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 9 0 0>, <&edma2 8 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 8 0 FSL_EDMA_RX>, <&edma2 9 0 0>;
 		status = "disabled";
 	};
 
@@ -107,8 +108,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 11 0 0>, <&edma2 10 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 10 0 FSL_EDMA_RX>, <&edma2 11 0 0>;
 		status = "disabled";
 	};
 
@@ -121,8 +122,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>;
 		status = "disabled";
 	};
 
@@ -135,8 +136,8 @@ dma_subsys: bus@5a000000 {
 		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
-		dma-names = "tx","rx";
-		dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+		dma-names = "rx", "tx";
+		dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>;
 		status = "disabled";
 	};
 
@@ -192,29 +193,6 @@ dma_subsys: bus@5a000000 {
 				<&pd IMX_SC_R_DMA_2_CH15>;
 	};
 
-	edma3: dma-controller@5a9f0000 {
-		compatible = "fsl,imx8qm-edma";
-		reg = <0x5a9f0000 0x90000>;
-		#dma-cells = <3>;
-		dma-channels = <8>;
-		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
-				<&pd IMX_SC_R_DMA_3_CH1>,
-				<&pd IMX_SC_R_DMA_3_CH2>,
-				<&pd IMX_SC_R_DMA_3_CH3>,
-				<&pd IMX_SC_R_DMA_3_CH4>,
-				<&pd IMX_SC_R_DMA_3_CH5>,
-				<&pd IMX_SC_R_DMA_3_CH6>,
-				<&pd IMX_SC_R_DMA_3_CH7>;
-	};
-
 	spi0_lpcg: clock-controller@5a400000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a400000 0x10000>;
@@ -460,6 +438,29 @@ dma_subsys: bus@5a000000 {
 		status = "disabled";
 	};
 
+	edma3: dma-controller@5a9f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a9f0000 0x90000>;
+		#dma-cells = <3>;
+		dma-channels = <8>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+				<&pd IMX_SC_R_DMA_3_CH1>,
+				<&pd IMX_SC_R_DMA_3_CH2>,
+				<&pd IMX_SC_R_DMA_3_CH3>,
+				<&pd IMX_SC_R_DMA_3_CH4>,
+				<&pd IMX_SC_R_DMA_3_CH5>,
+				<&pd IMX_SC_R_DMA_3_CH6>,
+				<&pd IMX_SC_R_DMA_3_CH7>;
+	};
+
 	i2c0_lpcg: clock-controller@5ac00000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ac00000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi
new file mode 100644
index 0000000000..9b8a44aa63
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-gpu0.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+gpu0_subsys: bus@53000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x53000000 0x0 0x53000000 0x1000000>;
+
+	gpu_3d0: gpu@53100000 {
+		compatible = "vivante,gc";
+		reg = <0x53100000 0x40000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		clock-names = "core", "shader";
+		assigned-clocks = <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_GPU_0_PID0 IMX_SC_PM_CLK_MISC>;
+		assigned-clock-rates = <700000000>, <850000000>;
+		power-domains = <&pd IMX_SC_R_GPU_0_PID0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index b972658efb..2123d431e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -81,6 +81,24 @@
 		status = "disabled";
 	};
 
+	reg_can0_stby: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "can0-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can1_stby: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_3 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -261,12 +279,81 @@
 	};
 };
 
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio2>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	pca9548_2: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+	};
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
 	status = "okay";
 };
 
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can0_stby>;
+	status = "okay";
+};
+
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
 &lsio_gpio4 {
 	status = "okay";
 };
@@ -436,6 +523,20 @@
 		>;
 	};
 
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX8DXL_UART2_TX_ADMA_FLEXCAN1_TX	0x00000021
+			IMX8DXL_UART2_RX_ADMA_FLEXCAN1_RX	0x00000021
+		>;
+	};
+
+	pinctrl_flexcan3: flexcan3grp {
+		fsl,pins = <
+			IMX8DXL_FLEXCAN2_TX_ADMA_FLEXCAN2_TX	0x00000021
+			IMX8DXL_FLEXCAN2_RX_ADMA_FLEXCAN2_RX	0x00000021
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
index 0a477f6318..5d012c9522 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -15,6 +15,63 @@
 	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&edma0 {
+	reg = <0x591f0000 0x1a0000>;
+	#dma-cells = <3>;
+	dma-channels = <25>;
+	dma-channel-mask = <0x1c0cc0>;
+	interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, /* asrc 0 */
+		<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+		<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+		<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+		<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+		<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, /* gpt0 */
+		<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* gpt1 */
+		<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* gpt2 */
+		<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; /* gpt3 */
+	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+			<&pd IMX_SC_R_DMA_0_CH1>,
+			<&pd IMX_SC_R_DMA_0_CH2>,
+			<&pd IMX_SC_R_DMA_0_CH3>,
+			<&pd IMX_SC_R_DMA_0_CH4>,
+			<&pd IMX_SC_R_DMA_0_CH5>,
+			<&pd IMX_SC_R_DMA_0_CH6>,
+			<&pd IMX_SC_R_DMA_0_CH7>,
+			<&pd IMX_SC_R_DMA_0_CH8>,
+			<&pd IMX_SC_R_DMA_0_CH9>,
+			<&pd IMX_SC_R_DMA_0_CH10>,
+			<&pd IMX_SC_R_DMA_0_CH11>,
+			<&pd IMX_SC_R_DMA_0_CH12>,
+			<&pd IMX_SC_R_DMA_0_CH13>,
+			<&pd IMX_SC_R_DMA_0_CH14>,
+			<&pd IMX_SC_R_DMA_0_CH15>,
+			<&pd IMX_SC_R_DMA_0_CH16>,
+			<&pd IMX_SC_R_DMA_0_CH17>,
+			<&pd IMX_SC_R_DMA_0_CH18>,
+			<&pd IMX_SC_R_DMA_0_CH19>,
+			<&pd IMX_SC_R_DMA_0_CH20>,
+			<&pd IMX_SC_R_DMA_0_CH21>,
+			<&pd IMX_SC_R_DMA_0_CH22>,
+			<&pd IMX_SC_R_DMA_0_CH23>,
+			<&pd IMX_SC_R_DMA_0_CH24>;
+};
+
 &edma2 {
 	interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
@@ -45,24 +102,44 @@
 		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&flexcan1 {
+	interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan2 {
+	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&flexcan3 {
+	interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &i2c0 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 1 0 0>, <&edma3 0 0 FSL_EDMA_RX>;
 };
 
 &i2c1 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 3 0 0>, <&edma3 2 0 FSL_EDMA_RX>;
 };
 
 &i2c2 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 5 0 0>, <&edma3 4 0 FSL_EDMA_RX>;
 };
 
 &i2c3 {
 	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+	dma-names = "tx","rx";
+	dmas = <&edma3 7 0 0>, <&edma3 6 0 FSL_EDMA_RX>;
 };
 
 &lpuart0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index f580eb6db9..a0674c5c55 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
new file mode 100644
index 0000000000..f35514b7b3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8dxp-tqma8xdp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP on MBa8Xx";
+	compatible = "tq,imx8dxp-tqma8xdp-mba8xx", "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
new file mode 100644
index 0000000000..e2de8517aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp-tqma8xdp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8dxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8DXP TQMa8XDP";
+	compatible = "tq,imx8dxp-tqma8xdp", "fsl,imx8dxp";
+};
+
+&pmic_thermal {
+	cooling-maps {
+		map0 {
+			cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxp.dtsi b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi
new file mode 100644
index 0000000000..a8f7352332
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxp.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/delete-node/ &A35_2;
+/delete-node/ &A35_3;
+
+&thermal_zones {
+	cpu0-thermal {
+		cooling-maps {
+			map0 {
+				cooling-device =
+				<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index b53104ed89..bd5b365867 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -151,6 +151,28 @@
 			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 		};
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
 };
 
 &A53_0 {
@@ -434,6 +456,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 
@@ -509,6 +541,24 @@
 	status = "okay";
 };
 
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		 <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		 <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		      "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba",
+		      "pll8k", "pll11k";
+	status = "okay";
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -636,6 +686,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
+			MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1        0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2        0xd6
+			MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3        0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
@@ -666,6 +728,13 @@
 		>;
 	};
 
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
 	pinctrl_typec1: typec1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index d9fa0deea7..33f8d7d197 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -25,23 +25,21 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_led>;
 
 		led1 {
 			label = "led1";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led2 {
 			label = "led2";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
 		};
 
 		led3 {
 			label = "led3";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -52,24 +50,12 @@
 
 	reg_rst_eth2: regulator-rst-eth2 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 		regulator-name = "rst-usb-eth2";
 	};
 
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
-		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-name = "usb1-vbus";
-	};
-
 	reg_vdd_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -80,9 +66,6 @@
 };
 
 &ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	can@0 {
@@ -91,7 +74,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can>;
 		clocks = <&osc_can>;
-		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
 		/*
 		 * Limit the SPI clock to 15 MHz to prevent issues
 		 * with corrupted data due to chip errata.
@@ -103,9 +86,6 @@
 };
 
 &ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	eeram@0 {
@@ -117,8 +97,8 @@
 
 &fec1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-connection-type = "rgmii-rxid";
+	pinctrl-0 = <&pinctrl_enet_rgmii>;
+	phy-connection-type = "rgmii-id";
 	phy-handle = <&ethphy>;
 	status = "okay";
 
@@ -127,55 +107,101 @@
 		#size-cells = <0>;
 
 		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-id4f51.e91b";
 			reg = <0>;
-			reset-assert-us = <1>;
-			reset-deassert-us = <15000>;
-			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
 
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_0      -> DIO1_OUT
+ *   GPIO_B_1      -> DIO2_OUT
+ */
 &gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1>;
-	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
-			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "DIO1_OUT",
+			  "DIO2_OUT", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
 };
 
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio5>;
-	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "",
-			  "", "", "", "", "", "", "", "";
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_2      -> DIO3_OUT
+ *   GPIO_B_3      -> DIO4_OUT
+ */
+&gpio3 {
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "DIO3_OUT",
+			  "USB_B_EN", "DIO4_OUT", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
 };
 
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
+/*
+ * Rename SoM signals according to board usage:
+ *   GPIO_B_4      -> DIO1_IN
+ *   GPIO_B_5      -> DIO2_IN
+ *   GPIO_B_6      -> DIO3_IN
+ *   GPIO_B_7      -> DIO4_IN
+ */
+&gpio4 {
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "DIO1_IN", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "DIO2_IN", "DIO3_IN",
+			  "DIO4_IN", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&i2c3 {
 	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		reg = <0x2c>;
+		non-removable-ports = <0>, <3>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
+&reg_usb2_vbus {
+	status = "disabled";
+};
+
+&reg_usdhc2_vcc {
+	status = "disabled";
+};
+
+&reg_usdhc3_vcc {
+	status = "disabled";
+};
+
 &uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
 	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	uart-has-rtscts;
 	status = "okay";
@@ -183,8 +209,6 @@
 
 &usbotg1 {
 	dr_mode = "otg";
-	disable-over-current;
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -195,14 +219,17 @@
 	#size-cells = <0>;
 	status = "okay";
 
+	/* VBUS is controlled by the hub */
+	/delete-property/ vbus-supply;
+
 	usb1@1 {
-		compatible = "usb424,9514";
+		compatible = "usb424,2514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		usbnet: ethernet@1 {
-			compatible = "usb424,ec00";
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 		};
@@ -210,167 +237,20 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	vmmc-supply = <&reg_vdd_3v3>;
-	vqmmc-supply = <&reg_nvcc_sd>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &iomuxc {
 	pinctrl_can: cangrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
-			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
-			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
-			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
-		>;
-	};
-
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
-			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
-			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
-			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
-			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
-			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
-			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
-			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
-			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
-			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
-			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
-			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
-			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* PHY RST */
-			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* ETH IRQ */
-		>;
-	};
-
-	pinctrl_gpio_led: gpioledgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
-			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x19
-		>;
-	};
-
-	pinctrl_gpio1: gpio1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
-			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
-			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
-			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
-			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
-			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
-		>;
-	};
-
-	pinctrl_gpio5: gpio5grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
-		>;
-	};
-
-	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
-		>;
-	};
-
-	pinctrl_usb_eth2: usbeth2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19  /* SDIO_B_PWR_EN */
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+	pinctrl_usb_hub: usbhubgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
-			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
-			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
-			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
-			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
-			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 60abcb636c..663ae52b48 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -3,6 +3,7 @@
  * Copyright (C) 2022 Kontron Electronics GmbH
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx8mm.dtsi"
 
@@ -28,6 +29,73 @@
 	chosen {
 		stdout-path = &uart3;
 	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB1";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+		enable-active-high;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VBUS_USB2";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_A";
+	};
+
+	reg_usdhc3_vcc: regulator-usdhc3-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+		enable-active-high;
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SDIO_B";
+	};
 };
 
 &A53_0 {
@@ -96,6 +164,79 @@
 	};
 };
 
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_ecspi2_gpio>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "GPIO_A_0", "", "GPIO_A_1",
+			  "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+			  "GPIO_A_5", "GPIO_A_6", "GPIO_A_7", "GPIO_B_0",
+			  "GPIO_B_1", "USB_A_OC#", "CAM_MCK", "USB_B_OC#",
+			  "ETH_MDC", "ETH_MDIO", "ETH_A_(S)(R)(G)MII_TXD3",
+			  "ETH_A_(S)(R)(G)MII_TXD2", "ETH_A_(S)(R)(G)MII_TXD1",
+			  "ETH_A_(S)(R)(G)MII_TXD0", "ETH_A_(R)(G)MII_TX_EN(_ER)",
+			  "ETH_A_(R)(G)MII_TX_CLK", "ETH_A_(R)(G)MII_RX_DV(_ER)",
+			  "ETH_A_(R)(G)MII_RX_CLK", "ETH_A_(S)(R)(G)MII_RXD0",
+			  "ETH_A_(S)(R)(G)MII_RXD1", "ETH_A_(R)(G)MII_RXD2",
+			  "ETH_A_(R)(G)MII_RXD3";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SDIO_A_CD#", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+			  "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+			  "SDIO_A_WP";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "GPIO_C_5", "GPIO_C_4", "SDIO_B_CD#", "SDIO_B_D5",
+			  "SDIO_B_D6", "SDIO_B_D7", "GPIO_C_0", "GPIO_C_1",
+			  "GPIO_C_2", "GPIO_C_3", "SDIO_B_D0", "SDIO_B_D1",
+			  "SDIO_B_D2", "SDIO_B_D3", "", "SDIO_B_D4",
+			  "CARRIER_PWR_EN", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_2",
+			  "USB_B_EN", "GPIO_B_3", "PCIe_CLKREQ#", "PCIe_A_PERST#",
+			  "PCIe_WAKE#", "USB_A_EN";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "GPIO_C_7", "", "I2S_A_DATA_IN", "I2S_B_DATA_IN",
+			  "GPIO_B_4", "BOOT_SEL0#", "BOOT_SEL1#", "",
+			  "", "", "I2S_LRCLK", "I2S_BITCLK",
+			  "I2S_A_DATA_OUT", "I2S_B_DATA_OUT", "GPIO_B_5", "GPIO_B_6",
+			  "GPIO_B_7", "SPI_A_/WP_(IO2)", "SPI_A_/HOLD_(IO3)", "GPIO_C_6",
+			  "I2S_MCLK", "UART_A_TX", "UART_A_RX", "UART_A_CTS",
+			  "UART_A_RTS", "", "", "",
+			  "PCIe_SM_ALERT", "UART_B_RTS", "UART_B_CTS", "UART_B_RX";
+};
+
+&gpio5 {
+	gpio-line-names = "UART_B_TX", "SDIO_B_PWR_EN", "SDIO_B_WP", "PWM_2",
+			  "PWM_1", "PWM_0", "", "",
+			  "", "", "SPI_A_SCK", "SPI_A_SDO_(IO1)",
+			  "SPI_A_SCK", "SPI_A_CS0#", "", "",
+			  "I2C_A_SCL", "I2C_A_SDA", "I2C_B_SCL", "I2C_B_SDA",
+			  "PCIe_SMCLK", "PCIe_SMDAT", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0#", "UART_CON_RX", "UART_CON_TX",
+			  "UART_C_RX", "UART_C_TX";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -205,22 +346,86 @@
 		};
 	};
 
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		address-width = <16>;
+		pagesize = <32>;
+		size = <8192>;
+	};
+
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
 		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
-		trickle-diode-disable;
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
 &uart3 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
 
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2>;
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -233,6 +438,26 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	vmmc-supply = <&reg_usdhc3_vcc>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
@@ -241,6 +466,12 @@
 };
 
 &iomuxc {
+	pinctrl_csi_mck: csimckgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59 /* CAM_MCK */
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
@@ -250,6 +481,106 @@
 		>;
 	};
 
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82 /* SPI_A_SDI_(IO0) */
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82 /* SPI_A_SDO_(IO1) */
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82 /* SPI_A_SCK */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19 /* SPI_A_CS0# */
+		>;
+	};
+
+	pinctrl_ecspi2_gpio: ecspi2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19 /* SPI_A_/WP_(IO2) */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* SPI_A_/HOLD_(IO3) */
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82 /* SPI_B_SDI */
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82 /* SPI_B_SDO */
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82 /* SPI_B_SCK */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* SPI_B_CS0# */
+		>;
+	};
+
+	pinctrl_enet_rgmii: enetrgmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91 /* ETH_A_(R)(G)MII_RXD3 */
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91 /* ETH_A_(R)(G)MII_RXD2 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_enet_rmii: enetrmiigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03 /* ETH_MDC */
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03 /* ETH_MDIO */
+			MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x4000001f /* ETH_A_(S)(R)(G)MII_TXD2 */
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x56 /* ETH_A_(S)(R)(G)MII_TXD1 */
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x56 /* ETH_A_(S)(R)(G)MII_TXD0 */
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x56 /* ETH_A_(S)(R)(G)MII_RXD1 */
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x56 /* ETH_A_(S)(R)(G)MII_RXD0 */
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER		0x56 /* ETH_A_(R)(G)MII_RX_CLK */
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x56 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x56 /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* GPIO_A_0 */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19 /* GPIO_A_1 */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* GPIO_A_2 */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* GPIO_A_3 */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19 /* GPIO_A_4 */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19 /* GPIO_A_5 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19 /* GPIO_A_6 */
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* GPIO_A_7 */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* GPIO_B_0 */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19 /* GPIO_B_1 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19 /* GPIO_C_5 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19 /* GPIO_C_4 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19 /* GPIO_C_0 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19 /* GPIO_C_1 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19 /* GPIO_C_2 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19 /* GPIO_C_3 */
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x19 /* GPIO_B_2 */
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21		0x19 /* GPIO_B_3 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19 /* GPIO_C_7 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19 /* GPIO_B_4 */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19 /* BOOT_SEL0# */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19 /* BOOT_SEL1# */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19 /* GPIO_B_5 */
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19 /* GPIO_B_6 */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19 /* GPIO_B_7 */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* GPIO_C_6 */
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
@@ -257,22 +588,149 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000083 /* I2C_B_SCL */
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000083 /* I2C_B_SDA */
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083 /* PCIe_SMCLK and I2C_CAM_SCL/CSI_TX_P */
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083 /* PCIe_SMDAT and I2C_CAM_SDA/CSI_TX_N */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19 /* PCIe_CLKREQ# */
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x19 /* PCIe_A_PERST# */
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x19 /* PCIe_WAKE# */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19 /* PCIe_SM_ALERT */
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
 		>;
 	};
 
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x19 /* PWM_0 */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19 /* PWM_1 */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x19 /* PWM_2 */
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19 /* USB_A_EN */
+		>;
+	};
+
+	pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x19 /* USB_B_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x19 /* SDIO_A_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19 /* SDIO_B_PWR_EN */
+		>;
+	};
+
+	pinctrl_reg_vdd_carrier: regvddcarriergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* CARRIER_PWR_EN */
+		>;
+	};
+
 	pinctrl_rtc: rtcgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
 		>;
 	};
 
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0		0xd6 /* I2S_A_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0		0xd6 /* I2S_A_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1		0xd6 /* I2S_B_DATA_IN */
+			MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1		0xd6 /* I2S_B_DATA_OUT */
+			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK		0xd6 /* I2S_MCLK */
+			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC		0xd6 /* I2S_LRCLK */
+			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK		0xd6 /* I2S_BITCLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0 /* UART_A_RX */
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0 /* UART_A_TX */
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0 /* UART_A_CTS */
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0 /* UART_A_RTS */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0 /* UART_B_RX */
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0 /* UART_B_TX */
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0 /* UART_B_CTS */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0 /* UART_B_RTS */
+		>;
+	};
+
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140 /* UART_CON_RX */
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140 /* UART_CON_TX */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x0 /* UART_C_RX */
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x0 /* UART_C_TX */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19 /* USB_A_OC# */
+		>;
+	};
+
+	pinctrl_usb2: usb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC		0x19 /* USB_B_OC# */
 		>;
 	};
 
@@ -327,6 +785,103 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96 /* SDIO_A_CLK */
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6 /* SDIO_A_CMD */
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6 /* SDIO_A_D0 */
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6 /* SDIO_A_D1 */
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6 /* SDIO_A_D2 */
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6 /* SDIO_A_D3 */
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6 /* SDIO_A_WP */
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x90
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19 /* SDIO_A_CD# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x90 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x90 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x90 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x90 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x90 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x90 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x90 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x90 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x90 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x90 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x94 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x94 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x94 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x94 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x94 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x94 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x94 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x94 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x94 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x94 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x96 /* SDIO_B_CLK */
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x96 /* SDIO_B_CMD */
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x96 /* SDIO_B_D0 */
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x96 /* SDIO_B_D1 */
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x96 /* SDIO_B_D2 */
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x96 /* SDIO_B_D3 */
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x96 /* SDIO_B_D4 */
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x96 /* SDIO_B_D5 */
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x96 /* SDIO_B_D6 */
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x96 /* SDIO_B_D7 */
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* SDIO_B_CD# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19 /* SDIO_B_WP */
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index ea6e8b8516..01b632b220 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,6 +5,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
 #include "imx8mm-tqma8mqml.dtsi"
 #include "mba8mx.dtsi"
 
@@ -74,19 +76,23 @@
 };
 
 &pcie_phy {
-	clocks = <&pcie0_refclk>;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcieclk 2>;
+	clock-names = "ref";
 	status = "okay";
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
-	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 3>,
 		 <&clk IMX8MM_CLK_PCIE1_AUX>;
 	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
-				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
 	assigned-clock-rates = <10000000>, <250000000>;
 	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
-				<&clk IMX8MM_SYS_PLL2_250M>;
+				 <&clk IMX8MM_SYS_PLL2_250M>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index bbbaf2165e..41c966147b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -49,12 +49,18 @@
 	};
 };
 
-/* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -200,6 +206,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 87b80e2412..5e2cbaf27e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -285,7 +285,8 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi1>;
-	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	flash@0 {
@@ -294,6 +295,12 @@
 		spi-max-frequency = <40000000>;
 		status = "okay";
 	};
+
+	tpm@1 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &fec1 {
@@ -319,7 +326,7 @@
 
 &gpio4 {
 	gpio-line-names = "", "", "", "",
-		"", "", "uart3_rs232#", "uart3_rs422#",
+		"dig1_ctl", "dig2_ctl", "uart3_rs232#", "uart3_rs422#",
 		"uart3_rs485#", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "",
 		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
@@ -842,6 +849,8 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x40000041 /* DIG2_CTL */
 			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
 			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
 			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
@@ -987,6 +996,7 @@
 			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
 			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
 			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 6f08115871..1b1880c607 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
+#include "imx8mm-overdrive.dtsi"
 
 / {
 	chosen {
@@ -929,7 +930,7 @@
 	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
 	pinctrl_gpio_9_dsi: gpio9dsigrp {
 		fsl,pins =
-			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c6>;	/* SODIMM 17 */
 	};
 
 	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
index 35b8d2060c..bbd80896db 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -99,8 +99,6 @@
 };
 
 &lcdif {
-	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
-	assigned-clock-rates = <594000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index a0e13d3324..269e70f66a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -110,6 +110,20 @@
 		spdif-out;
 		spdif-in;
 	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+		};
+	};
 };
 
 &easrc {
@@ -285,6 +299,16 @@
 	status = "okay";
 };
 
+&micfil {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 
@@ -522,6 +546,18 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXC_PDM_CLK		0xd6
+			MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC	0xd6
+			MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2	0xd6
+			MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3	0xd6
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
index 1b633bd1eb..ea1855171f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "RVE gateway";
-	compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+	compatible = "rve,gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
 
 	crystal_duart_24m: crystal-duart-24m {
 		compatible = "fixed-clock";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
new file mode 100644
index 0000000000..96db07fc9b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtso
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2024 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mn-pinfunc.h"
+
+&{/} {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+};
+
+&rst_usb_hub_hog {
+	output-low;
+};
+
+&sel_usb_hub_hog {
+	output-low;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	/delete-property/ disable-over-current;
+	over-current-active-low;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_usb1_connector: usb1-connectorgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index c07d59147a..433d8bba44 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -41,7 +41,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usb0hub_sel>;
 
-	sel-usb-hub-hog {
+	sel_usb_hub_hog: sel-usb-hub-hog {
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -198,8 +198,7 @@
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
-			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 136e75c512..932c8b05c7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1168,7 +1168,7 @@
 							 <&clk IMX8MN_SYS_PLL1_800M>;
 				assigned-clock-rates = <266000000>,
 						       <24000000>,
-						       <594000000>,
+						       <24000000>,
 						       <500000000>,
 						       <200000000>;
 				#power-domain-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
index e5da908047..8be251b693 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -50,6 +50,8 @@
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
 	status = "okay";
 
 	mdio {
@@ -66,6 +68,71 @@
 			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
 };
 
 &flexspi {
@@ -206,6 +273,10 @@
 	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8997-bt";
+	};
 };
 
 &usdhc1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index b5ce7b14b5..7e1b58dbe2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -45,6 +46,19 @@
 		clock-frequency = <25000000>;
 	};
 
+	clk_pwm4: clock-pwm4 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "codec-pwm4";
+		/*
+		 * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz
+		 * and the calculated PWM period is 1 and duty cycle is 50%, the
+		 * result is exactly 12 MHz, which is fine for SGTL5000 MCLK.
+		 */
+		pwms = <&pwm4 0 83 0>;
+	};
+
 	panel: panel {
 		/* Compatible string is filled in by panel board DT Overlay. */
 		backlight = <&backlight>;
@@ -82,6 +96,24 @@
 		vin-supply = <&buck4>;
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
 	watchdog { /* TPS3813 */
 		compatible = "linux,wdt-gpio";
 		pinctrl-names = "default";
@@ -288,6 +320,15 @@
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_pwm4>;
+		VDDA-supply = <&buck4>;
+		VDDIO-supply = <&buck4>;
+	};
+
 	usb-hub@2c {
 		compatible = "microchip,usb2514bi";
 		reg = <0x2c>;
@@ -429,6 +470,21 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_panel_pwm>;
@@ -436,6 +492,23 @@
 	status = "disabled";
 };
 
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	#clock-cells = <0>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	status = "okay";
+};
+
 /* SD slot */
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -785,6 +858,12 @@
 		>;
 	};
 
+	pinctrl_pwm4: pwm4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0xd6
+		>;
+	};
+
 	pinctrl_rtc: rtc-grp {
 		fsl,pins = <
 			/* RTC_IRQ# */
@@ -816,7 +895,6 @@
 			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
 			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
 			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
-			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
 			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
 		>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 43f1d45ccc..f5115f9e8c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -254,7 +254,7 @@
 				  <&clk IMX8MP_CLK_CLKOUT2>,
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		assigned-clock-rates = <13000000>, <13000000>, <208000000>;
 		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index c8640cac3e..00a240484c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -19,6 +19,30 @@
 		stdout-path = &uart1;
 	};
 
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds1>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <11>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+		num-interpolated-steps = <2>;
+		power-supply = <&reg_lvds1_reg_en>;
+		pwms = <&pwm3 0 50000 0>;
+	};
+
+	panel1_lvds: panel-lvds {
+		compatible = "edt,etml1010g3dra";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vcc_3v3_sw>;
+
+		port {
+			panel1_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -39,6 +63,15 @@
 		regulator-name = "can2-stby";
 	};
 
+	reg_lvds1_reg_en: regulator-lvds1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "lvds1_reg_en";
+	};
+
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -61,6 +94,13 @@
 		startup-delay-us = <100>;
 		off-on-delay-us = <12000>;
 	};
+
+	reg_vcc_3v3_sw: regulator-vcc-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &eqos {
@@ -135,10 +175,41 @@
 	};
 };
 
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel1_in>;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&rv3028 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rtc>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+	wakeup-source;
+	trickle-resistor-ohms = <3000>;
+};
+
 /* debug console */
 &uart1 {
 	pinctrl-names = "default";
@@ -239,12 +310,12 @@
 			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
 			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
 			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
-			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
-			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
-			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
-			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
-			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x12
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x12
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x12
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x12
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x12
 			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
 		>;
 	};
@@ -289,16 +360,34 @@
 		>;
 	};
 
+	pinctrl_lvds1: lvds1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x12
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x12
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x1C0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
 		>;
 	};
 
@@ -319,7 +408,7 @@
 
 	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x40
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index c976c3b6cb..e6ffa6a6b6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -175,7 +175,6 @@
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
-		trickle-resistor-ohms = <3000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index 0e8d0f3c7e..e7bf032265 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -63,8 +63,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -228,6 +235,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index f5491a608b..3c063f8a93 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -183,7 +183,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4330-bt";
-		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index c3305f0d40..faa17cbbe2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -552,7 +552,7 @@
 				regulator-name = "On-module +V3.3_ADC (LDO4)";
 			};
 
-			LDO5 {
+			reg_vdd_sdio: LDO5 {
 				regulator-max-microvolt = <3300000>;
 				regulator-min-microvolt = <1800000>;
 				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
@@ -885,6 +885,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_vdd_sdio>;
 };
 
 /* On-module eMMC */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 39a550c1cd..8141926e4e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1636,8 +1636,10 @@
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pclk", "wrap", "phy", "axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_CLK_24M>;
 				assigned-clock-rates = <500000000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
 				status = "disabled";
@@ -1670,8 +1672,10 @@
 					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
 				clock-names = "pclk", "wrap", "phy", "axi";
-				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_CLK_24M>;
 				assigned-clock-rates = <266000000>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index b302daca4c..0165f3a259 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -28,18 +28,6 @@
 		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	pcie1_refclk: pcie1-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -103,23 +91,24 @@
 	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 };
 
+/* PCIe slot on X36 */
 &pcie0 {
 	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
 	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
-		 <&pcie0_refclk>,
-		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&pcieclk 3>,
+		 <&pcieclk 2>,
 		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
 	status = "okay";
 };
 
 /*
- * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as
  * static gpio hog.
  */
 &pcie1 {
 	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
-		 <&pcie1_refclk>,
-		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&pcieclk 1>,
+		 <&pcieclk 0>,
 		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
 	status = "okay";
 };
@@ -171,6 +160,7 @@
 };
 
 &usb3_phy1 {
+	vbus-supply = <&reg_hub_vbus>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
new file mode 100644
index 0000000000..8466a8204e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-eval-v1.2",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
index 5ab0921eb5..b0ebf6d054 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "imx8qm-apalis.dtsi"
-#include "imx8-apalis-eval.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
 
 / {
 	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
new file mode 100644
index 0000000000..92c0ae0c03
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board V1.2";
+	compatible = "toradex,apalis-imx8-v1.1-eval-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/delete-property/ no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/delete-property/ no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
index c8ff758315..c998e542f9 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -6,7 +6,7 @@
 /dts-v1/;
 
 #include "imx8qm-apalis-v1.1.dtsi"
-#include "imx8-apalis-eval.dtsi"
+#include "imx8-apalis-eval-v1.1.dtsi"
 
 / {
 	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 6d50838ad1..c5585bfc4e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -36,11 +36,23 @@
 		regulator-name = "SD1_SPWR";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
-		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
 
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &lpuart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpuart0>;
@@ -104,6 +116,20 @@
 };
 
 &iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
+			IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x0600004c
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpio-grp {
+		fsl,pins = <
+			IMX8QM_GPT0_CLK_LSIO_GPIO0_IO14		0xc600004c
+			IMX8QM_GPT0_CAPTURE_LSIO_GPIO0_IO15	0xc600004c
+		>;
+	};
+
 	pinctrl_fec1: fec1grp {
 		fsl,pins = <
 			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
index ec1639174e..545e175c88 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -6,20 +6,25 @@
 
 &fec1 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &fec2 {
 	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+	iommus = <&smmu 0x12 0x7f80>;
 };
 
 &usdhc1 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc2 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
 
 &usdhc3 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+	iommus = <&smmu 0x11 0x7f80>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index cd96f9f75d..aa9f28c443 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -17,6 +17,32 @@
 		power-domains = <&pd IMX_SC_R_UART_4>;
 	};
 
+	i2c4: i2c@5a840000 {
+		compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+		reg = <0x5a840000 0x4000>;
+		interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&i2c4_lpcg 0>,
+			 <&i2c4_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+		status = "disabled";
+	};
+
+	i2c4_lpcg: clock-controller@5ac40000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac40000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c4_lpcg_clk",
+				     "i2c4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_4>;
+	};
+
 	can1_lpcg: clock-controller@5ace0000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5ace0000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 31744fc1ab..b3d01677b7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -265,6 +265,47 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	smmu: iommu@51400000 {
+		compatible = "arm,mmu-500";
+		interrupt-parent = <&gic>;
+		reg = <0 0x51400000 0 0x40000>;
+		#global-interrupts = <1>;
+		#iommu-cells = <2>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	system-controller {
 		compatible = "fsl,imx-scu";
 		mbox-names = "tx0",
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
new file mode 100644
index 0000000000..7d2e98bf8b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp-mba8xx.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-tqma8xqp.dtsi"
+#include "mba8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP on MBa8Xx";
+	compatible = "tq,imx8qxp-tqma8xqp-mba8xx", "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
new file mode 100644
index 0000000000..b14040bf4d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-tqma8xqp.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include "imx8qxp.dtsi"
+#include "tqma8xx.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8QXP TQMa8XQP";
+	compatible = "tq,imx8qxp-tqma8xqp", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 958267b333..10e16d84c0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -260,6 +260,13 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
 	xtal32k: clock-xtal32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -310,6 +317,7 @@
 	/* sorted in register address */
 	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-gpu0.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index 69dd8e3102..24bb253b93 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -37,7 +37,7 @@
 			no-map;
 		};
 
-		rsc_table: rsc-table@1fff8000{
+		rsc_table: rsc-table@1fff8000 {
 			reg = <0 0x1fff8000 0 0x1000>;
 			no-map;
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 9921ea13ab..a7cb571d74 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -175,7 +175,6 @@
 	vmmc-supply = <&reg_usdhc2_vmmc>;
 	bus-width = <4>;
 	status = "okay";
-	no-sdio;
 	no-mmc;
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
new file mode 100644
index 0000000000..85fb188b05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VCC_SD";
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	no-1-8-v;
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x30e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_default: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x179e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK            0x179e
+			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK            0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD            0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0        0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT    0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 0000000000..88c2657b50
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * Product homepage:
+ * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/* Ethernet */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+			  <&clk IMX93_CLK_ENET_REF>,
+			  <&clk IMX93_CLK_ENET_REF_PHY>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+	assigned-clock-rates = <100000000>, <50000000>, <50000000>;
+	status = "okay";
+
+	mdio: mdio {
+		clock-frequency = <5000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RX_ER			0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
+			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x179e
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x1386
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x138e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x1386
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x138e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x1386
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x1386
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x1386
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x1386
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x1386
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x179e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
index f6e422dc26..9d2328c185 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -122,10 +122,8 @@
 
 	/* protectable identification memory (part of M24C64-D @57) */
 	eeprom@5f {
-		compatible = "st,24c64", "atmel,24c64";
+		compatible = "atmel,24c64d-wl";
 		reg = <0x5f>;
-		size = <32>;
-		pagesize = <32>;
 		vcc-supply = <&reg_v3v3>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
new file mode 100644
index 0000000000..576d6982a4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "imx93-var-som.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 on Symphony evaluation board";
+	compatible = "variscite,var-som-mx93-symphony",
+		     "variscite,var-som-mx93", "fsl,imx93";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/*
+	 * Needed only for Symphony <= v1.5
+	 */
+	reg_fec_phy: regulator-fec-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ethosu_mem: ethosu-region@88000000 {
+			compatible = "shared-dma-pool";
+			reusable;
+			reg = <0x0 0x88000000 0x0 0x8000000>;
+		};
+
+		vdev0vring0: vdev0vring0@87ee0000 {
+			reg = <0 0x87ee0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@87ee8000 {
+			reg = <0 0x87ee8000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@87ef0000 {
+			reg = <0 0x87ef0000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@87ef8000 {
+			reg = <0 0x87ef8000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@87f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87f00000 0 0x100000>;
+			no-map;
+		};
+
+		ele_reserved: ele-reserved@87de0000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x87de0000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pca9534 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/* Use external instead of internal RTC*/
+&bbnsm_rtc {
+	status = "disabled";
+};
+
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@5 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <5>;
+			qca,disable-smarteee;
+			eee-broken-1000t;
+			reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <20000>;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+	scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&lpi2c5 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c5_gpio>;
+	scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* J18.7, J18.9 */
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX                       0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX               0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c1_gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__GPIO1_IO00			0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL			0x40000b9e
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO23__GPIO2_IO23			0x31e
+			MX93_PAD_GPIO_IO22__GPIO2_IO22			0x31e
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO05__LPUART6_RX			0x31e
+			MX93_PAD_GPIO_IO04__LPUART6_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO18__GPIO2_IO18		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
new file mode 100644
index 0000000000..783938245e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2023 Variscite Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "Variscite VAR-SOM-MX93 module";
+	compatible = "variscite,var-som-mx93", "fsl,imx93";
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>,	/* WIFI_RESET */
+			      <&gpio3 7 GPIO_ACTIVE_LOW>;	/* WIFI_PWR_EN */
+	};
+
+	reg_eqos_phy: regulator-eqos-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eqos_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <1000000>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_reg_eqos_phy: regeqosgrp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__GPIO1_IO07			0x51e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8f2e7c42ad..601c94e1fa 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -294,7 +294,7 @@
 				status = "disabled";
 			};
 
-			i3c1: i3c-master@44330000 {
+			i3c1: i3c@44330000 {
 				compatible = "silvaco,i3c-master-v1";
 				reg = <0x44330000 0x10000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -671,7 +671,7 @@
 				status = "disabled";
 			};
 
-			i3c2: i3c-master@42520000 {
+			i3c2: i3c@42520000 {
 				compatible = "silvaco,i3c-master-v1";
 				reg = <0x42520000 0x10000>;
 				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index e2bc53b8d3..427467df42 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -29,6 +29,12 @@
 		stdout-path = &uart3;
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -100,12 +106,6 @@
 		};
 	};
 
-	pcie0_refclk: pcie0-refclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_12v: regulator-12v {
 		compatible = "regulator-fixed";
 		regulator-name = "MBA8MX_12V";
@@ -219,7 +219,7 @@
 			line-name = "BOOT_CFG_OE#";
 		};
 
-		rst-usb-hub-hog {
+		rst_usb_hub_hog: rst-usb-hub-hog {
 			gpio-hog;
 			gpios = <13 0>;
 			output-high;
@@ -264,6 +264,13 @@
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clk@68 {
+		compatible = "renesas,9fgv0441";
+		reg = <0x68>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c3 {
diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
new file mode 100644
index 0000000000..276d1683b0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	adc {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>;
+	};
+
+	aliases {
+		rtc0 = &pcf85063;
+		rtc1 = &rtc;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl_lvds>;
+		pwms = <&adma_pwm 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* TODO LVDS panels */
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie_1v5: regulator-pcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_1V5";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_1v5>;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	reg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8XX_PCIE_3V3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_mb: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tqm-tlv320aic32";
+		audio-codec = <&tlv320aic3x04>;
+		ssi-controller = <&sai1>;
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+	vref-supply = <&reg_1v8>;
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&adma_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_admapwm>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ethphy3>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&lsio_gpio3>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec2>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&mclkout0_lpcg 0>;
+		clock-names = "mclk";
+		iov-supply = <&reg_1v8>;
+		ldoin-supply = <&reg_3v3>;
+	};
+
+	se97b_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	at24c02_54: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9538>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+
+		gpio-line-names = "", "LED_A",
+				  "LED_B", "",
+				  "DSI_EN", "USB_RESET#",
+				  "V_12V_EN", "PCIE_DIS#";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2gpio>;
+	scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* TODO LDB */
+
+&lpspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi3>;
+	num-cs = <2>;
+	cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lsgpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "X4_15",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* TODO: Mini-PCIe */
+
+&sai1 {
+	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+			  <&sai1_lpcg 0>;
+	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3v3_mb>;
+	no-1-8-v;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0	0x02000060>,
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1	0x02000060>,
+			   <IMX8QXP_ADC_IN2_ADMA_ADC_IN2	0x02000060>,
+			   <IMX8QXP_ADC_IN3_ADMA_ADC_IN3	0x02000060>;
+	};
+
+	pinctrl_admapwm: admapwmgrp {
+		fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT	0x00000021>;
+	};
+
+	pinctrl_bl_lvds: bllvdsgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000021>;
+	};
+
+	pinctrl_can0: can0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX		0x00000021>,
+			   <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX		0x00000021>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX		0x00000021>,
+			   <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX		0x00000021>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02		0x00000040>,
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x00000040>;
+	};
+
+	pinctrl_ethphy3: ethphy3grp {
+		fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x00000040>,
+			   <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x00000040>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
+			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
+	};
+
+	pinctrl_fec2: fec2grp {
+		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
+			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
+			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
+			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
+			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
+			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
+			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
+			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
+			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttonsgrp {
+		fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000020>,
+			   <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14	0x00000020>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA	0x06000021>;
+	};
+
+	pinctrl_lpi2c2gpio: lpi2c2gpiogrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31	0x06000021>,
+			   <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x06000021>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX	0x06000020>,
+			   <IMX8QXP_UART1_TX_ADMA_UART1_TX	0x06000020>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX	0x06000020>,
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX	0x06000020>;
+	};
+
+	pinctrl_lsgpio3: lsgpio3grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15	0x00000021>;
+	};
+
+	pinctrl_pca9538: pca9538grp {
+		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000020>;
+	};
+
+	pinctrl_pcieb: pcieagrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
+	};
+
+	pinctrl_reg_pcie_1v5: regpcie1v5grp {
+		fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30	0x00000021>;
+	};
+
+	pinctrl_reg_pcie_3v3: regpcie3v3grp {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x00000021>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000041>,
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC		0x06000041>,
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000041>,
+			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000041>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI	0x00000041>,
+			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO	0x00000041>,
+			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK	0x00000041>,
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27	0x00000021>,
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29	0x00000021>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK	0x00000041>,
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI	0x00000041>,
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO	0x00000041>,
+			   <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
+	};
+
+	pinctrl_spi3: spi3grp {
+		fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK	0x00000041>,
+			   <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI	0x00000041>,
+			   <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO	0x00000041>,
+			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16	0x00000021>,
+			   <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1	0x00000021>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
+			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqma8xx.dtsi b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
new file mode 100644
index 0000000000..d98469a7c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqma8xx.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * global autoconfigured region for contiguous allocations
+		 * must not exceed memory size and region
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x20000000>;
+			alloc-ranges = <0 0x96000000 0 0x30000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+/* TQMa8Xx only uses industrial grade, reduce trip points accordingly */
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <100000>;
+};
+/* end of temperature grade adjustments */
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+/* TODO GPU */
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1gpio>;
+	scl-gpios = <&lsio_gpio1 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&lsio_gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	at24c02: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	m24c64: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3v3>;
+	};
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic_thermal: pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&reg_1v8>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x0600004d
+			IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x0600004d
+			IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x0600004d
+			IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x0600004d
+			IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS	0x0600004d
+			IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x0600004d
+			IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x0600004d
+			IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x0600004d
+			IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x0600004d
+			IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x0600004d
+			IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x0600004d
+			IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS	0x0600004d
+			IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x0600004d
+			IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x0600004d
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA	0x06000021
+		>;
+	};
+
+	pinctrl_lpi2c1gpio: lpi2c1gpiogrp {
+		fsl,pins = <
+			IMX8QXP_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27	0x06000021
+			IMX8QXP_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28	0x06000021
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK	0x06000040
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD	0x00000020
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+		>;
+	};
+};