Merging upstream version 6.9.7.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 173 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
new file mode 100644
index 0000000000..08b3b08274
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
+	model = "Acelink EW-7886CAX";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+		nvmem-cells = <&macaddr>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	mdio-bus {
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <50000>;
+		reset-post-delay-us = <20000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy6: phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <6>;
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x100000>;
+				label = "bootloader";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x80000>;
+				label = "u-boot-env";
+			};
+
+			partition@180000 {
+				compatible = "nvmem-cells";
+				reg = <0x180000 0x200000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					macaddr: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@380000 {
+				reg = <0x380000 0x200000>;
+				label = "fip";
+			};
+
+			partition@580000 {
+				reg = <0x580000 0x4000000>;
+				label = "ubi";
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};