diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 978 |
1 files changed, 978 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi new file mode 100644 index 0000000000..d55e407504 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -0,0 +1,978 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + */ + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include "pmi8996.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-mpp.h> + +/delete-node/ &adsp_mem; +/delete-node/ &slpi_mem; +/delete-node/ &venus_mem; +/delete-node/ &gpu_mem; + +/ { + qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ + qcom,board-id = <8 0>; + + chosen { + bootargs = "maxcpus=2"; + }; + + reserved-memory { + ramoops@a7f00000 { + compatible = "ramoops"; + reg = <0 0xa7f00000 0 0x100000>; + record-size = <0x20000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + gpu_mem: gpu@90400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90400000 0x0 0x2000>; + no-map; + }; + + slpi_mem: memory@90500000 { + reg = <0 0x90500000 0 0xa00000>; + no-map; + }; + + venus_mem: memory@90f00000 { + reg = <0 0x90f00000 0 0x500000>; + no-map; + }; + }; + + panel_tvdd: tvdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "panel_tvdd"; + gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&tp_vddio_en>; + pinctrl-names = "default"; + }; + + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_detect>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wl_reg_on>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c3 { + clock-frequency = <355000>; + status = "okay"; + + tof_sensor: vl53l0x@29 { + compatible = "st,vl53l0x"; + reg = <0x29>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c5 { + clock-frequency = <355000>; + status = "okay"; + + /* FUSB301 USB-C controller */ +}; + +&blsp2_i2c6 { + clock-frequency = <355000>; + status = "okay"; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&panel_tvdd>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <220>; + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&camera0_mclk { + drive-strength = <2>; + output-low; +}; + +&camera0_pwdn { + drive-strength = <2>; + output-low; +}; + +&camera0_rst { + pins = "gpio30"; + drive-strength = <2>; + output-low; +}; + +&camera2_mclk { + drive-strength = <2>; + output-low; +}; + +&camera2_rst { + drive-strength = <2>; + output-low; +}; + +&hsusb_phy1 { + vdd-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&pm8994_l28>; + status = "okay"; +}; + +&pcie_phy { + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + status = "okay"; +}; + +&pm8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_gpios_defaults>; + gpio-line-names = + "NC", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "NC", + "NFC_VEN", + "NC", + "NC", + "NC", + "NC", + "NC", + "EAR_EN", + "NC", + "PM_DIVCLK1", + "PMI_CLK", + "NC", + "WL_SLEEP_CLK", + "NC", + "PMIC_SPON", + "UIM_BATT_ALARM", + "PMK_SLEEP_CLK"; + + /* + * We don't yet know for sure which GPIOs are of our interest, but what + * we do know is that if a vendor sets the pins to a non-default state, there's + * probably a reason for it, and just to be on the safe side, we follow suit. + */ + pm8994_gpios_defaults: pm8994-gpios-default-state { + pm8994-gpio1-nc-pins { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + }; + + vol-down-n-pins { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + vol-up-n-pins { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + power-source = <PM8994_GPIO_S4>; + }; + + camera-snapshot-n-pins { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + camera-focus-n-pins { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio6-nc-pins { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + nfc-download-pins { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio8-nc-pins { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pm8994-gpio9-nc-pins { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + nfc-clock-pins { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + drive-push-pull; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio11-nc-pins { + pins = "gpio11"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + pm8994-gpio12-nc-pins { + pins = "gpio12"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + ear-enable-pins { + pins = "gpio13"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio14-nc-pins { + pins = "gpio14"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + pm-divclk1-gpio-pins { + pins = "gpio15"; + function = "func1"; + output-high; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_VPH>; + }; + + pmi-clk-gpio-pins { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pm8994-gpio17-nc-pins { + pins = "gpio17"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + rome-sleep-pins { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>; + power-source = <PM8994_GPIO_S4>; + }; + + pm8994-gpio19-nc-pins { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pm8994-gpio22-nc-pins { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + }; +}; + +&pm8994_mpps { + pinctrl-names = "default"; + pinctrl-0 = <&pm8994_mpps_defaults>; + + gpio-line-names = + "SDC_UIM_VBIAS", + "LCD_ID_ADC", + "VREF_DACX", + "NC", + "FLASH_THERM", + "NC", + "NC", + "RF_ID"; + + pm8994_mpps_defaults: pm8994-mpps-default-state { + lcd-id_adc-mpp-pins { + pins = "mpp2"; + function = "analog"; + input-enable; + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>; + }; + + pm-mpp4-nc-pins { + pins = "mpp4"; + function = "digital"; + bias-high-impedance; + power-source = <PM8994_GPIO_VPH>; + }; + + flash-therm-mpp-pins { + pins = "mpp5"; + function = "analog"; + input-enable; + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>; + }; + + mpp6-nc-pins { + pins = "mpp6"; + function = "digital"; + bias-high-impedance; + }; + + rf-id-mpp-pins { + pins = "mpp8"; + function = "analog"; + input-enable; + qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>; + }; + }; +}; + +&pm8994_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&pmi8994_gpios { + pinctrl-names = "default"; + pinctrl-0 = <&pmi8994_gpios_defaults>; + + gpio-line-names = + "VIB_LDO_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "USB_SWITCH_SEL", + "NC"; + + pmi8994_gpios_defaults: pmi8994-gpios-default-state { + vib-ldo-en-gpio-pins { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-low; + bias-disable; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio2-nc-pins { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pmi-gpio3-nc-pins { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + input-enable; + bias-high-impedance; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_VPH>; + }; + + pmi-gpio4-nc-pins { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio5-nc-pins { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio6-nc-pins { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio7-nc-pins { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + pmi-gpio8-nc-pins { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <PM8994_GPIO_S4>; + }; + + usb-switch-sel-pins { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + drive-push-pull; + }; + + pmi-gpio10-nc-pins { + pins = "gpio10"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + drive-push-pull; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + + pm8994_s9: s9 { + qcom,saw-slave; + }; + + pm8994_s10: s10 { + qcom,saw-slave; + }; + + pm8994_s11: s11 { + qcom,saw-leader; + regulator-name = "vdd_apcc"; + regulator-always-on; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + }; +}; + +&pmi8994_lpg { + qcom,power-source = <1>; + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: + pmi8994_s2: s2 { + /* Pinned to a high value for now to avoid random crashes. */ + regulator-min-microvolt = <1015000>; + regulator-max-microvolt = <1015000>; + regulator-name = "vdd_gfx"; + regulator-always-on; + }; +}; + +&pmi8994_wled { + default-brightness = <512>; + qcom,num-strings = <3>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8994_s3>; + vdd_l2_l26_l28-supply = <&pm8994_s3>; + vdd_l3_l11-supply = <&pm8994_s3>; + vdd_l4_l27_l31-supply = <&pm8994_s3>; + vdd_l5_l7-supply = <&pm8994_s5>; + vdd_l6_l12_l32-supply = <&pm8994_s5>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l14_l15-supply = <&pm8994_s5>; + vdd_l20_l21-supply = <&pm8994_s5>; + vdd_l25-supply = <&pm8994_s3>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-always-on; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + /* L6 and L7 seem unused. */ + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <22000>; + regulator-allow-set-load; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2500000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-allow-set-load; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l30: l30 { }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc1 { + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&sdhc2 { + cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + pinctrl-0 = <&sw_service_gpio>; + pinctrl-names = "default"; + + disp_reset_n_gpio: disp-reset-n-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + mdp_vsync_p_gpio: mdp-vsync-p-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + + sw_service_gpio: sw-service-gpio-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_detect: usb-detect-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + uim_detect_en: uim-detect-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + tray_det_pin: tray-det-state { + pins = "gpio40"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tp_vddio_en: tp-vddio-en-state { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + lcd_vddio_en: lcd-vddio-en-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + wl_host_wake: wl-host-wake-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wl_reg_on: wl-reg-on-state { + pins = "gpio84"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + ts_reset_n: ts-rst-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + }; + + touch_int_n: touch-int-n-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touch_int_sleep: touch-int-sleep-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb3 { + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&usb3_id>; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; +}; |