diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm64/boot/dts/qcom/pm8953.dtsi | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm8953.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8953.dtsi | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi new file mode 100644 index 0000000000..1067e141be --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8953-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8953_temp>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm8953", "qcom,spmi-pmic"; + reg = <0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8953_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + pm8953_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm8953_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8953_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8953_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x00 0x31 0x00 0x01>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@8 { + reg = <VADC_DIE_TEMP>; + }; + channel@9 { + reg = <VADC_REF_625MV>; + }; + channel@a { + reg = <VADC_REF_1250MV>; + }; + channel@c { + reg = <VADC_SPARE1>; + }; + channel@e { + reg = <VADC_GND_REF>; + }; + channel@f { + reg = <VADC_VDD_VADC>; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8953_gpios: gpio@c000 { + compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8953_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8953", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; |