diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm64/boot/dts/qcom/sa8540p-ride.dts | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sa8540p-ride.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 658 |
1 files changed, 658 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts new file mode 100644 index 0000000000..b04f72ec09 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -0,0 +1,658 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8540p.dtsi" +#include "sa8540p-pmics.dtsi" + +/ { + model = "Qualcomm SA8540P Ride"; + compatible = "qcom,sa8540p-ride", "qcom,sa8540p"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c12 = &i2c12; + i2c15 = &i2c15; + i2c18 = &i2c18; + serial0 = &uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a: ldo11 { + regulator-name = "vreg_l11a"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + }; + + regulators-2 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +ðernet0 { + snps,mtl-rx-config = <ðernet0_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet0_mtl_tx_setup>; + + max-speed = <1000>; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_default>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Marvell 88EA1512 */ + rgmii_phy: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + + interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + device_type = "ethernet-phy"; + + /* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation + * from userspace to talk to the switch on the SGMII side of things + */ + marvell,reg-init = + /* Set MODE[2:0] to RGMII_SGMII */ + <0x12 0x14 0xfff8 0x4>, + /* Soft reset required after changing MODE[2:0] */ + <0x12 0x14 0x7fff 0x8000>; + }; + }; + + ethernet0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + snps,mtl-rx-config = <ðernet1_mtl_rx_setup>; + snps,mtl-tx-config = <ðernet1_mtl_tx_setup>; + + max-speed = <1000>; + phy-mode = "rgmii-txid"; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet1_default>; + + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + ethernet1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + ethernet1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; + + status = "okay"; +}; + +&i2c12 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_default>; + + status = "okay"; +}; + +&i2c15 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c15_default>; + + status = "okay"; +}; + +&i2c18 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c18_default>; + + status = "okay"; +}; + +&pcie2a { + ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>, + <0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pcie3a { + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>, + <0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>; + + perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie3a_default>; + + status = "okay"; +}; + +&pcie3a_phy { + vdda-phy-supply = <&vreg_l11a>; + vdda-pll-supply = <&vreg_l3a>; + + status = "okay"; +}; + +&pmm8540a_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmm8540c_sdam_2 { + status = "okay"; + + rtc_offset: rtc-offset@a0 { + reg = <0xa0 0x4>; + }; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sa8540p/cdsp0.mbn"; + status = "okay"; +}; + +&remoteproc_nsp1 { + firmware-name = "qcom/sa8540p/cdsp1.mbn"; + status = "okay"; +}; + +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vccq-supply = <&vreg_l6c>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&tlmm { + ethernet0_default: ethernet0-default-state { + mdc-pins { + pins = "gpio175"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio176"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188"; + function = "rgmii_0"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182"; + function = "rgmii_0"; + drive-strength = <16>; + bias-disable; + }; + }; + + ethernet1_default: ethernet1-default-state { + mdc-pins { + pins = "gpio97"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + mdio-pins { + pins = "gpio98"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-tx-pins { + pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110"; + function = "rgmii_1"; + drive-strength = <16>; + bias-pull-up; + }; + + rgmii-rx-pins { + pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104"; + function = "rgmii_1"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c0_default: i2c0-default-state { + /* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */ + pins = "gpio135", "gpio136"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c1_default: i2c1-default-state { + /* To PM40028B-F3EI PCIe switch */ + pins = "gpio158", "gpio159"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c12_default: i2c12-default-state { + /* To Maxim max20411 */ + pins = "gpio0", "gpio1"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c15_default: i2c15-default-state { + /* To display connector (SIP1 only) */ + pins = "gpio36", "gpio37"; + function = "qup15"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c18_default: i2c18-default-state { + /* To ASM330LHH IMU (SIP1 only) */ + pins = "gpio66", "gpio67"; + function = "qup18"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie2a_default: pcie2a-default-state { + perst-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + perst-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; |