Merging upstream version 6.10.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 42 insertions, 17 deletions

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 0c22f3efec..6af99116c7 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -51,6 +51,8 @@
 
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 58 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -329,12 +331,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l16e_3p0: ldo16 {
@@ -350,49 +358,58 @@
 
 	zap-shader {
 		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+		firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn";
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
 
-	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-0 = <&i2c1_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
 
-	hid@10 {
+	touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
 		hid-descr-addr = <0x1>;
 
 		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
 &i2c7 {
-	clock-frequency = <100000>;
+	clock-frequency = <1000000>;
 
-	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+	pinctrl-0 = <&i2c7_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
 
-	hid@5 {
+	keyboard@5 {
 		compatible = "hid-over-i2c";
 		reg = <0x5>;
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kb_int_default>;
+		pinctrl-names = "default";
 	};
 
-	hid@2c {
+	touchpad@2c {
 		compatible = "hid-over-i2c";
 		reg = <0x2c>;
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tp_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -669,14 +686,6 @@
 		drive-strength = <2>;
 	};
 
-	i2c1_hid_active: i2c1-hid-active-state {
-		pins = "gpio122";
-		function = "gpio";
-
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
 	i2c7_active: i2c7-active-state {
 		pins = "gpio98", "gpio99";
 		function = "qup7";
@@ -685,8 +694,8 @@
 		drive-strength = <2>;
 	};
 
-	i2c7_hid_active: i2c7-hid-active-state {
-		pins = "gpio37", "gpio24";
+	kb_int_default: kb-int-default-state {
+		pins = "gpio37";
 		function = "gpio";
 
 		bias-pull-up;
@@ -718,6 +727,22 @@
 		};
 	};
 
+	tp_int_default: tp-int-default-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
 	usbprim_sbu_default: usbprim-sbu-state {
 		oe-n-pins {
 			pins = "gpio152";