diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-11 08:27:49 +0000 |
commit | ace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch) | |
tree | b2d64bc10158fdd5497876388cd68142ca374ed3 /arch/arm64/boot/dts/qcom/sdm630.dtsi | |
parent | Initial commit. (diff) | |
download | linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip |
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm630.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm630.dtsi | 2541 |
1 files changed, 2541 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi new file mode 100644 index 0000000000..ec6003212c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -0,0 +1,2541 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com> + * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com> + */ + +#include <dt-bindings/clock/qcom,gcc-sdm660.h> +#include <dt-bindings/clock/qcom,gpucc-sdm660.h> +#include <dt-bindings/clock/qcom,mmcc-sdm660.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/interconnect/qcom,sdm660.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,apr.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + }; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + PWR_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <200>; + }; + + PWR_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PERF_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <154>; + exit-latency-us = <87>; + min-residency-us = <200>; + }; + + PERF_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <262>; + exit-latency-us = <301>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <284>; + exit-latency-us = <384>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <272>; + exit-latency-us = <329>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <332>; + exit-latency-us = <368>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <545>; + exit-latency-us = <1609>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998", "qcom,scm"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm: remoteproc { + compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sdm660"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,sdm660-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + }; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + wlan_msa_guard: wlan-msa-guard@85600000 { + reg = <0x0 0x85600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: wlan-msa-mem@85700000 { + reg = <0x0 0x85700000 0x0 0x100000>; + no-map; + }; + + qhee_code: qhee-code@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + rmtfs_mem: memory@85e00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85e00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + smem_region: smem-mem@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3300000>; + no-map; + }; + + mpss_region: mpss@8ac00000 { + reg = <0x0 0x8ac00000 0x0 0x7e00000>; + no-map; + }; + + adsp_region: adsp@92a00000 { + reg = <0x0 0x92a00000 0x0 0x1e00000>; + no-map; + }; + + mba_region: mba@94800000 { + reg = <0x0 0x94800000 0x0 0x200000>; + no-map; + }; + + buffer_mem: tzbuffer@94a00000 { + reg = <0x0 0x94a00000 0x0 0x100000>; + no-map; + }; + + venus_region: venus@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + + adsp_mem: adsp-region@f6000000 { + reg = <0x0 0xf6000000 0x0 0x800000>; + no-map; + }; + + qseecom_mem: qseecom-region@f6800000 { + reg = <0x0 0xf6800000 0x0 0x1400000>; + no-map; + }; + + zap_shader_region: gpu@fed00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xfed00000 0x0 0xa00000>; + no-map; + }; + }; + + smem: smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 10>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0x94000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo_board>, + <&sleep_clk>; + }; + + rpm_msg_ram: sram@778000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,sdm630-qfprom", "qcom,qfprom"; + reg = <0x00780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@240 { + reg = <0x243 0x1>; + bits = <1 3>; + }; + + gpu_speed_bin: gpu-speed-bin@41a0 { + reg = <0x41a2 0x1>; + bits = <5 7>; + }; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0x00793000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + bimc: interconnect@1008000 { + compatible = "qcom,sdm660-bimc"; + reg = <0x01008000 0x78000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + restart@10ac000 { + compatible = "qcom,pshold"; + reg = <0x010ac000 0x4>; + }; + + cnoc: interconnect@1500000 { + compatible = "qcom,sdm660-cnoc"; + reg = <0x01500000 0x10000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + snoc: interconnect@1626000 { + compatible = "qcom,sdm660-snoc"; + reg = <0x01626000 0x7090>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + + assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + assigned-clock-rates = <1000>; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "bus"; + #global-interrupts = <2>; + #iommu-cells = <1>; + + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + a2noc: interconnect@1704000 { + compatible = "qcom,sdm660-a2noc"; + reg = <0x01704000 0xc100>; + #interconnect-cells = <1>; + clock-names = "bus", + "bus_a", + "ipa", + "ufs_axi", + "aggre2_ufs_axi", + "aggre2_usb3_axi", + "cfg_noc_usb2_axi"; + clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB2_AXI_CLK>; + }; + + mnoc: interconnect@1745000 { + compatible = "qcom,sdm660-mnoc"; + reg = <0x01745000 0xa010>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a", "iface"; + clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>, + <&mmcc AHB_CLK_SRC>; + }; + + tsens: thermal-sensor@10ae000 { + compatible = "qcom,sdm630-tsens", "qcom,tsens-v2"; + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ + #qcom,sensors = <12>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs_1: syscon@1f60000 { + compatible = "qcom,sdm630-tcsr", "syscon"; + reg = <0x01f60000 0x20000>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + /* + * Avoid garbage data while BT module + * is powered off or not driving signal + */ + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; + + cts-pins { + /* Match the pull of the BT module */ + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep-state { + tx-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-cts-rts-pins { + pins = "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c1_default: i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c2_default: i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c3_default: i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c5_default: i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c6_default: i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c7_default: i2c7-default-state { + pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep-state { + pins = "gpio26", "gpio27"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c8_default: i2c8-default-state { + pins = "gpio30", "gpio31"; + function = "blsp_i2c8_a"; + drive-strength = <2>; + bias-disable; + }; + + i2c8_sleep: i2c8-sleep-state { + pins = "gpio30", "gpio31"; + function = "blsp_i2c8_a"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_default: cci0-default-state { + pins = "gpio36","gpio37"; + function = "cci_i2c"; + bias-pull-up; + drive-strength = <2>; + }; + + cci1_default: cci1-default-state { + pins = "gpio38","gpio39"; + function = "cci_i2c"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-508.0", "qcom,adreno"; + + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc GPUCC_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc GPUCC_RBCPR_CLK>, + <&gpucc GPUCC_GFX3D_CLK>; + + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + power-domains = <&rpmpd SDM660_VDDMX>; + iommus = <&kgsl_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>; + interconnect-names = "gfx-mem"; + + operating-points-v2 = <&gpu_sdm630_opp_table>; + + status = "disabled"; + + gpu_sdm630_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-775000000 { + opp-hz = /bits/ 64 <775000000>; + opp-level = <RPM_SMD_LEVEL_TURBO>; + opp-peak-kBps = <5412000>; + opp-supported-hw = <0xa2>; + }; + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0xff>; + }; + opp-588000000 { + opp-hz = /bits/ 64 <588000000>; + opp-level = <RPM_SMD_LEVEL_NOM>; + opp-peak-kBps = <3072000>; + opp-supported-hw = <0xff>; + }; + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + opp-peak-kBps = <2724000>; + opp-supported-hw = <0xff>; + }; + opp-370000000 { + opp-hz = /bits/ 64 <370000000>; + opp-level = <RPM_SMD_LEVEL_SVS>; + opp-peak-kBps = <2188000>; + opp-supported-hw = <0xff>; + }; + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + opp-peak-kBps = <1648000>; + opp-supported-hw = <0xff>; + }; + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + opp-peak-kBps = <1200000>; + opp-supported-hw = <0xff>; + }; + }; + }; + + kgsl_smmu: iommu@5040000 { + compatible = "qcom,sdm630-smmu-v2", + "qcom,adreno-smmu", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + + /* + * GX GDSC parent is CX. We need to bring up CX for SMMU + * but we need both up for Adreno. On the other hand, we + * need to manage the GX rpmpd domain in the adreno driver. + * Enable CX/GX GDSCs here so that we can manage just the GX + * RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + #global-interrupts = <2>; + #iommu-cells = <1>; + + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + gpucc: clock-controller@5065000 { + compatible = "qcom,gpucc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9038>; + + clocks = <&xo_board>, + <&gcc GCC_GPU_GPLL0_CLK>, + <&gcc GCC_GPU_GPLL0_DIV_CLK>; + clock-names = "xo", + "gcc_gpu_gpll0_clk", + "gcc_gpu_gpll0_div_clk"; + status = "disabled"; + }; + + lpass_smmu: iommu@5100000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x05100000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + sram@290000 { + compatible = "qcom,rpm-stats"; + reg = <0x00290000 0x10000>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + usb3: usb@a8f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0a8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "bus"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + assigned-clock-rates = <19200000>, <120000000>, + <19200000>; + + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB_30_GDSC>; + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_30_BCR>; + + usb3_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xc8d0>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* + * SDM630 technically supports USB3 but I + * haven't seen any devices making use of it. + */ + maximum-speed = "high-speed"; + phys = <&qusb2phy0>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + + qusb2phy0: phy@c012000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c012000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX0_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + qusb2phy1: phy@c014000 { + compatible = "qcom,sdm660-qusb2-phy"; + reg = <0x0c014000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + status = "disabled"; + }; + + sdhc_2: mmc@c084000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c084000 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + bus-width = <4>; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + + + interconnects = <&a2noc 3 &a2noc 10>, + <&gnoc 0 &cnoc 28>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + power-domains = <&rpmpd SDM660_VDDCX>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <200000 140000>; + opp-avg-kBps = <130718 133320>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <250000 160000>; + opp-avg-kBps = <196078 150000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + + sdhc_1: mmc@c0c4000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c0c4000 0x1000>, + <0x0c0c5000 0x1000>, + <0x0c0c8000 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; + + interconnects = <&a2noc 2 &a2noc 10>, + <&gnoc 0 &cnoc 27>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + operating-points-v2 = <&sdhc1_opp_table>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + power-domains = <&rpmpd SDM660_VDDCX>; + + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <200000 140000>; + opp-avg-kBps = <130718 133320>; + }; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <250000 160000>; + opp-avg-kBps = <196078 150000>; + }; + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; + }; + + usb2: usb@c2f8800 { + compatible = "qcom,sdm660-dwc3", "qcom,dwc3"; + reg = <0x0c2f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>; + clock-names = "cfg_noc", "core", + "mock_utmi", "sleep"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + qcom,select-utmi-as-pipe-clk; + + resets = <&gcc GCC_USB_20_BCR>; + + usb2_dwc3: usb@c200000 { + compatible = "snps,dwc3"; + reg = <0x0c200000 0xc8d0>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + + /* This is the HS-only host */ + maximum-speed = "high-speed"; + phys = <&qusb2phy1>; + phy-names = "usb2-phy"; + snps,hird-threshold = /bits/ 8 <0>; + }; + }; + + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-sdm630"; + reg = <0x0c8c0000 0x40000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "xo", + "sleep_clk", + "gpll0", + "gpll0_div", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "dp_link_2x_clk_divsel_five", + "dp_vco_divided_clk_src_mux"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <&gcc GCC_MMSS_GPLL0_DIV_CLK>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <0>, + <0>, + <0>, + <0>; + }; + + mdss: display-subsystem@c900000 { + compatible = "qcom,mdss"; + reg = <0x0c900000 0x1000>, + <0x0c9b0000 0x1040>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + mdp: display-controller@c901000 { + compatible = "qcom,sdm630-mdp5", "qcom,mdp5"; + reg = <0x0c901000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + assigned-clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + interconnects = <&mnoc 2 &bimc 5>, + <&mnoc 3 &bimc 5>, + <&gnoc 0 &mnoc 17>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "rotator-mem"; + iommus = <&mmss_smmu 0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-peak-kBps = <320000 320000 76800>; + required-opps = <&rpmpd_opp_low_svs>; + }; + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-peak-kBps = <6400000 6400000 160000>; + required-opps = <&rpmpd_opp_svs>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <6400000 6400000 190000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + opp-330000000 { + opp-hz = /bits/ 64 <330000000>; + opp-peak-kBps = <6400000 6400000 240000>; + required-opps = <&rpmpd_opp_nom>; + }; + opp-412500000 { + opp-hz = /bits/ 64 <412500000>; + opp-peak-kBps = <6400000 6400000 320000>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + mdss_dsi0: dsi@c994000 { + compatible = "qcom,sdm660-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x0c994000 0x400>; + reg-names = "dsi_ctrl"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd SDM660_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_BYTE0_INTF_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MISC_AHB_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "byte", + "byte_intf", + "mnoc", + "iface", + "bus", + "core_mmss", + "pixel", + "core"; + + phys = <&mdss_dsi0_phy>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@c994400 { + compatible = "qcom,dsi-phy-14nm-660"; + reg = <0x0c994400 0x100>, + <0x0c994500 0x300>, + <0x0c994800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + status = "disabled"; + }; + }; + + blsp1_dma: dma-controller@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart1: serial@c16f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c16f000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@c170000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c170000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "disabled"; + }; + + blsp_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp1_dma 10>, <&blsp1_dma 11>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp2_uart1: serial@c1af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1af000 0x200>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; + status = "disabled"; + }; + + blsp_i2c5: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c7: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c8: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c8_default>; + pinctrl-1 = <&i2c8_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + sram@146bf000 { + compatible = "qcom,sdm630-imem", "syscon", "simple-mfd"; + reg = <0x146bf000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + camss: camss@ca00020 { + compatible = "qcom,sdm660-camss"; + reg = <0x0ca00020 0x10>, + <0x0ca30000 0x100>, + <0x0ca30400 0x100>, + <0x0ca30800 0x100>, + <0x0ca30c00 0x100>, + <0x0c824000 0x1000>, + <0x0ca00120 0x4>, + <0x0c825000 0x1000>, + <0x0ca00124 0x4>, + <0x0c826000 0x1000>, + <0x0ca00128 0x4>, + <0x0ca31000 0x500>, + <0x0ca10000 0x1000>, + <0x0ca14000 0x1000>; + reg-names = "csi_clk_mux", + "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csiphy2", + "csiphy2_clk_mux", + "ispif", + "vfe0", + "vfe1"; + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid3", + "csiphy0", + "csiphy1", + "csiphy2", + "ispif", + "vfe0", + "vfe1"; + clocks = <&mmcc CAMSS_AHB_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI0_AHB_CLK>, + <&mmcc CAMSS_CSI0_CLK>, + <&mmcc CAMSS_CPHY_CSID0_CLK>, + <&mmcc CAMSS_CSI0PIX_CLK>, + <&mmcc CAMSS_CSI0RDI_CLK>, + <&mmcc CAMSS_CSI1_AHB_CLK>, + <&mmcc CAMSS_CSI1_CLK>, + <&mmcc CAMSS_CPHY_CSID1_CLK>, + <&mmcc CAMSS_CSI1PIX_CLK>, + <&mmcc CAMSS_CSI1RDI_CLK>, + <&mmcc CAMSS_CSI2_AHB_CLK>, + <&mmcc CAMSS_CSI2_CLK>, + <&mmcc CAMSS_CPHY_CSID2_CLK>, + <&mmcc CAMSS_CSI2PIX_CLK>, + <&mmcc CAMSS_CSI2RDI_CLK>, + <&mmcc CAMSS_CSI3_AHB_CLK>, + <&mmcc CAMSS_CSI3_CLK>, + <&mmcc CAMSS_CPHY_CSID3_CLK>, + <&mmcc CAMSS_CSI3PIX_CLK>, + <&mmcc CAMSS_CSI3RDI_CLK>, + <&mmcc CAMSS_CSI0PHYTIMER_CLK>, + <&mmcc CAMSS_CSI1PHYTIMER_CLK>, + <&mmcc CAMSS_CSI2PHYTIMER_CLK>, + <&mmcc CSIPHY_AHB2CRIF_CLK>, + <&mmcc CAMSS_CSI_VFE0_CLK>, + <&mmcc CAMSS_CSI_VFE1_CLK>, + <&mmcc CAMSS_ISPIF_AHB_CLK>, + <&mmcc THROTTLE_CAMSS_AXI_CLK>, + <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_VFE0_AHB_CLK>, + <&mmcc CAMSS_VFE0_CLK>, + <&mmcc CAMSS_VFE0_STREAM_CLK>, + <&mmcc CAMSS_VFE1_AHB_CLK>, + <&mmcc CAMSS_VFE1_CLK>, + <&mmcc CAMSS_VFE1_STREAM_CLK>, + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>, + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>; + clock-names = "ahb", + "cphy_csid0", + "cphy_csid1", + "cphy_csid2", + "cphy_csid3", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi", + "csi3_ahb", + "csi3", + "csi3_phy", + "csi3_pix", + "csi3_rdi", + "csiphy0_timer", + "csiphy1_timer", + "csiphy2_timer", + "csiphy_ahb2crif", + "csi_vfe0", + "csi_vfe1", + "ispif_ahb", + "throttle_axi", + "top_ahb", + "vfe0_ahb", + "vfe0", + "vfe0_stream", + "vfe1_ahb", + "vfe1", + "vfe1_stream", + "vfe_ahb", + "vfe_axi"; + interconnects = <&mnoc 5 &bimc 5>; + interconnect-names = "vfe-mem"; + iommus = <&mmss_smmu 0xc00>, + <&mmss_smmu 0xc01>, + <&mmss_smmu 0xc02>, + <&mmss_smmu 0xc03>; + power-domains = <&mmcc CAMSS_VFE0_GDSC>, + <&mmcc CAMSS_VFE1_GDSC>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci: cci@ca0c000 { + compatible = "qcom,msm8996-cci"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0ca0c000 0x1000>; + interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>; + + assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>; + assigned-clock-rates = <80800000>, <37500000>; + clocks = <&mmcc CAMSS_TOP_AHB_CLK>, + <&mmcc CAMSS_CCI_AHB_CLK>, + <&mmcc CAMSS_CCI_CLK>, + <&mmcc CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + + pinctrl-names = "default"; + pinctrl-0 = <&cci0_default &cci1_default>; + power-domains = <&mmcc CAMSS_TOP_GDSC>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + venus: video-codec@cc00000 { + compatible = "qcom,sdm660-venus"; + reg = <0x0cc00000 0xff000>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc THROTTLE_VIDEO_AXI_CLK>; + clock-names = "core", "iface", "bus", "bus_throttle"; + interconnects = <&gnoc 0 &mnoc 13>, + <&mnoc 4 &bimc 5>; + interconnect-names = "cpu-cfg", "video-mem"; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&mmss_smmu 0x400>, + <&mmss_smmu 0x401>, + <&mmss_smmu 0x40a>, + <&mmss_smmu 0x407>, + <&mmss_smmu 0x40e>, + <&mmss_smmu 0x40f>, + <&mmss_smmu 0x408>, + <&mmss_smmu 0x409>, + <&mmss_smmu 0x40b>, + <&mmss_smmu 0x40c>, + <&mmss_smmu 0x40d>, + <&mmss_smmu 0x410>, + <&mmss_smmu 0x421>, + <&mmss_smmu 0x428>, + <&mmss_smmu 0x429>, + <&mmss_smmu 0x42b>, + <&mmss_smmu 0x42c>, + <&mmss_smmu 0x42d>, + <&mmss_smmu 0x411>, + <&mmss_smmu 0x431>; + memory-region = <&venus_region>; + power-domains = <&mmcc VENUS_GDSC>; + status = "disabled"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "vcodec0_core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; + #global-interrupts = <2>; + #iommu-cells = <1>; + + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + adsp_pil: remoteproc@15700000 { + compatible = "qcom,sdm660-adsp-pas"; + reg = <0x15700000 0x4040>; + + interrupts-extended = + <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + power-domains = <&rpmpd SDM660_VDDCX>; + power-domain-names = "cx"; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs_glb 9>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&lpass_smmu 1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; + + gnoc: interconnect@17900000 { + compatible = "qcom,sdm660-gnoc"; + reg = <0x17900000 0xe000>; + #interconnect-cells = <1>; + /* + * This one apparently features no clocks, + * so let's not mess with the driver needlessly + */ + clock-names = "bus", "bus_a"; + clocks = <&xo_board>, <&xo_board>; + }; + + apcs_glb: mailbox@17911000 { + compatible = "qcom,sdm660-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + clock-frequency = <19200000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + sound: sound { + }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <125000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + /* + * According to what downstream DTS says, + * the entire power efficient cluster has + * only a single thermal sensor. + */ + + pwr-cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + pwr_cluster_alert0: trip-point0 { + temperature = <70000>; + hysteresis = <1000>; + type = "passive"; + }; + + pwr_cluster_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 0xf08>, + <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 0 0xf08>; + }; +}; + |